EN / ACS800-31/U31 Hardware Manual - Simark Controls

105Cable typesThe table below gives copper and aluminium cable types for different load currents.Cable sizing is based on max. 9 cables laid on a cable ladder side by side, ambienttemperature 30°C, PVC insulation, surface temperature 70°C (EN 60204-1 andIEC 60364-5-2/2001). For other conditions, size the cables according to local safetyregulations, appropriate input voltage and the load current of the drive.Copper cables with concentriccopper shieldMax. load Cable typecurrentAmm 2Aluminium cables with concentriccopper shieldMax. load Cable typecurrentAmm 234 3x6 61 3x2547 3x10 75 3x3562 3x16 91 3x5079 3x25 117 3x7098 3x35 143 3x95119 3x50 165 3x120153 3x70 191 3x150186 3x95215 3x120249 3x150284 3x185PDM code: 00096931-CCable entriesMains, DC link and motor cable terminal sizes (per phase), accepted cablediameters and tightening torques are given below.Frame size U1, V1, W1, U2, V2, W2, UDC+,UDC- Earthing PEWire size Max. cable ØIP21TighteningtorqueWire size Tighteningtorquemm 2 mm Nm mm 2 NmR5 6…70 35 10 6…70 15R6 95...185 * 53 20…40 16...95 8* with cable lugs 16...70 mm 2 , tightening torque 20...40 NmDimensions, weights and noiseFrame size IP21 NoiseHeight Width Depth Weightmm mm mm kg dBR5 816 265 390 65 70R6 970 300 439 100 73Technical data