527-284 EMI/RFI Shield Sock Backshell with Strain ... - Glenair, Inc.

ARINC 600Backshells527-284EMI/RFI Shield Sock Backshell with Strain-Relieffor Size 2 ARINC 600 Series Connectors527 284 NF P A 4 B 4 C 3Product SeriesBasic NumberFinish (Table II)Connector Designator (TableIII)Dash No. (Table I)(Omit for None)Port (Omit for None)Dash No. (Table I)(Omit for None)Port (Omit for None)Dash No. (Table I)(Omit for NonePort (Omit for None)CaptivatedSelf-LockingTelescoping S crewsStRAIN RELIEFWItH BRAIDSoCK(447HS557-***)BraidSockC ClosedA Thread2.000(50.8)1.500(38.1)Port ABraidSockPort BDBBraid Sock5.610 (142.5)BraidSockPort C1.200 ( 30.5)Min1.790(45.5)Metric dimensions (mm) are indicated in parentheses.© 2011 Glenair, Inc. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comF-16E-Mail: sales@glenair.com

527-284EMI/RFI Shield Sock Backshell with Strain-Relieffor Size 2 ARINC 600 Series ConnectorsARINC 600BackshellsDashNo.12345678*9*Shell SizeRef091113151719212325TABLE I: CABLE ENTRYA THREADISO METRICM12 x 1.0 -6HM15 x 1.0 -6HM18 x 1.0 -6HM22 x 1.0 -6HM25 x 1.0 -6HM28 x 1.0 -6HM31 x 1.0 -6HM34 x 1.0 -6HM37 x 1.0 -6H*Consult factory for availability.BMax.980 (24.9)1.050 (26.7)1.200 (30.5)1.300 (33.0)1.440 (36.6)1.560 (39.6)1.690 (42.9)1.770 (45.0)1.890 (48.0)C+.031 (0.8).265 (6.7).310 (7.9).390 (9.9).506 (12.9).591 (15.0).661 (16.8).744 (18.9).826 (21.0).896 (22.8)TABLE III: CONNECTOR DESIGNATORDMin.220 (5.6).270 (6.9).350 (8.9).470 (11.9).550 (14.0).620 (15.7).700 (17.8).780 (19.8).850 (21.6)ARINC 600 series connector backshells are designed to replacethe insert retainer plates. Due to non-standard modifications bythe connector manufacturer, the backshell may require specialdesign alterations to mate properly. The following should be used todetermine if a backshell modification is required. Prior to ordering,consult factory with connector part numbers not shown to ensure aproper fit.SymbolBC*G*JLFMNNCNFTU**ZNTABLE II:FINISH OPTIONSFinishCadmium Plate/Olive DrabBlack AnodizeAnodic Hard CoatGold Iridite over Cadmium Plateover Electroless NickelCadmium Plate/Bright overElectroless NickelElectroless NickelCadmium Plate/Olive Drab overElectroless NickelZinc Cobalt/Dark Olive DrabCadmium Plate/Olive Drab overElectroless NickelCadmium Plate/Bright overElectroless NickelCadmium Plate/BlackZinc-Nickel Alloy/Olive Drab*Anodize finish is not suitable for EMI shielding or groundingapplications.**Applicable to corrosion resisting steel backshells and accessories.Consult factory for other available finishes.ConnectorDesignatorPP1P2P3P5P6Connector DescriptionAll Manufacturer’s Plug and Receptacle Shells, Exceptfor Those Listed Below (Prior to ordering, consult factorywith connector part numbers not listed below to ensurea proper fit.)Cannon BKAD****322 Series PlugCannon/Radiall Environmental PlugCannon/Boeing BACC 66 PlugRadiall/Boeing BACC66 PlugCannon BKAC & BKAE XXX322 Series EnvironmentalPlugNOTES:1. Metric dimensions (mm) are indicated in parentheses.© 2011 Glenair, Inc. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comF-17E-Mail: sales@glenair.com