ANSI/NIST-ITL 1-2011 - NIST Visual Image Processing Group ...

More documents

Recommendations

Info

ANSI/NIST-ITL 1-2011Data Format for the Interchange of Biometric and Forensic Information20.4 Field 16.004: Source agency / ORI / SRCThis mandatory ASCII field shall contain the identification of the administration ororganization that originally captured the image contained in the record. Normally,the Originating Agency Identifier, ORI, of the agency that captured the image willbe contained in this field. The SRC shall be defined by the user and be inaccordance with the receiving agency.20.5 Field 16.005: User-defined testing date / UTDThis mandatory ASCII field shall contain the date that the image contained in therecord was captured. The YYYY characters shall represent the year the imagewas captured; the MM characters shall be the tens and units values of the month;and the DD characters shall be the tens and units values of the day in the month.For example, 20040229 represents February 29, 2004.20.6 Field 16.006: Horizontal line length / HLLThis mandatory field shall contain the number of pixels contained on a singlehorizontal line of the transmitted image.20.7 Field 16.007: Vertical line length / VLLThis mandatory field shall contain the number of horizontal lines contained in thetransmitted image.20.8 Field 16.008: Scale units / SLCThis mandatory field shall specify the units used to describe the image samplingfrequency (pixel density). A "1" in this field indicates pixels per inch, or a "2"indicates pixels per centimeter. A "0" in this field indicates no scale is given. Forthis case, the quotient of HPS/VPS gives the pixel aspect ratio.20.9 Field 16.009: Horizontal pixel scale / HPSThis mandatory field shall specify the integer pixel density used in the horizontaldirection of the transmitted image providing the SLC contains a "1" or a "2".Otherwise, it indicates the horizontal component of the pixel aspect ratio.20.10 Field 16.010: Vertical pixel scale / VPSThis mandatory field shall specify the integer pixel density used in the verticaldirection of the transmitted image providing the SLC contains a "1" or a "2".Otherwise, it indicates the vertical component of the pixel aspect ratio.20.11 Field 16.011: Compression algorithm / CGAThis mandatory field shall contain an entry from Table 2 to specify the algorithmused for compressing the image. An entry of "NONE" in this field indicates thatthe data contained in this record is uncompressed.200DRAFT 2
201ANSI/NIST-ITL 1-2011Data Format for the Interchange of Biometric and Forensic Information20.12 Field 16.012: Bits per pixel / BPXThis mandatory field shall contain the number of bits used to represent a pixel.This field shall contain an entry of “8” for normal grayscale values of “0” to “255”.Any entry in this field greater than “8” shall represent a grayscale pixel withincreased precision.20.13 Field 16.013: Color space / CSPThis optional field shall contain an entry from Table 1 to identify the color spaceused to exchange the image data. If the color space for an RGB image cannotbe determined, an entry of "RGB" shall be entered. The description for field10.012 contains additional information on the color space field.20.14 Field 16.016: Scanned horizontal pixel scale / SHPSThis optional ASCII field shall specify the horizontal pixel density used for thescanning of the original image providing the SLC field contains a "1" or a "2".Otherwise, it indicates the horizontal component of the pixel aspect ratio.20.15 Field 16.017: Scanned vertical pixel scale / SVPSThis optional ASCII field shall specify the vertical pixel density used for thescanning of the original image providing the SLC field contains a "1" or a "2".Otherwise, it indicates the vertical component of the pixel aspect ratio.20.16 Field 16.020: Comment / COMThis optional ASCII field may be used to insert comments or other ASCII textinformation with the image data.21.17 Field 16.024: User-defined testing image quality score/ UQSThis optional ASCII field is used to specify one or more different metrics of imagequality score data for the image stored in this record. The meaning attributed tothis metric must be defined and interpreted by the producer of the scoringalgorithm or by the person or system used to assign the metric to the image. Themetric may be a predictor of AFIS matcher accuracy performance or a differentmetric to indicate a value associated with the quality of the image for a particularfunction.This field may contain one or more subfields, each consisting of three informationitems. This subfield (Quality Metric Subfield / QMS) is repeated for each imageand quality algorithm used.The first information item (image quality score / QVU) shall be a quantitativeexpression of the predicted matching performance of the biometric sample.This item contains the ASCII representation of the integer between 0 and 100assigned to the image data by a quality algorithm. Higher values indicatebetter quality. An entry of “255” shall indicate a failed attempt to calculate aquality score. An entry of “254” shall indicate that no attempt to calculate afingerprint image quality score was made. The use of additional values toDRAFT 2
Page 1 and 2:
ANSI/NIST-ITL 1-2011Data Format for
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
ANSI/NIST-ITL 1-201111Data Format f
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
47ANSI/NIST-ITL 1-2011Data Format f
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168: ANSI/NIST-ITL 1-2011Data Format for
Page 173 and 174: FeaturePoint IDANSI/NIST-ITL 1-2011
Page 205 and 206: 187ANSI/NIST-ITL 1-2011Data Format
Page 217: ANSI/NIST-ITL 1-2011Data Format for
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285:
show all

ANSI/NIST-ITL 1-2011 - NIST Visual Image Processing Group ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?