MY1 Mechanically Jointed Rodless Cylinder

Series MY1H80Side SupportSide support AMY-SA2-øGCDAB2-øHFESide support BMY-SB2-JCDABEModelMY-S10MY-S16MY-S20MY-S25MY-S32MY-S40ABABABABABABApplicable bore sizeMY1H10MY1H16MY1H20MY1H25MY1H32MY1H40A B C61.681.6103.6119148167537191105130145121525354555D212638506480E F G3.6 1.8 6.54.9 3 6.56.4 4 88 5 9.511.7 6 1114.8 8.5 14H3.43.44.55.56.69(mm)JM4 x 0.7M4 x 0.7M5 x 0.8M6 x 1M8 x 1.25M10 x 1.5Guide for Side Support ApplicationFor long stroke operation, the cylindertube may be deflected depending on itsown weight and the load weight. In sucha case, use a side support in the middlesection. The spacing (l) of the supportmust be no more than the values shownin the graph on the right.Wl(kg)5040(600)(800)Caution1. If the cylinder mounting surfaces arenot measured accurately, using a sidesupport may cause poor operation.Therefore, be sure to level the cylindertube when mounting. Also, for longstroke operation involving vibrationand impact, use of a side support isrecommended even if the spacingvalue is within the allowable limitsshown in the graph.2. Support brackets are not for mounting;use them solely for providing support.lWWllWeight (m)3020100(100)MY1H10(550)(500)(450)MY1H20MY1H16MY1H25MY1H32MY1H40MY1H40500 1000 1500Support spacing (l )(mm)8-11-84