LEADTEK Wireless GPS Receiver User's Manual
LEADTEK Wireless GPS Receiver User's Manual LEADTEK Wireless GPS Receiver User's Manual
.complete the connectionAppendix C Installing WinFast Navigator for Pocket PCNote :Microsoft ActiveSync has to be installed on your computer when you install WinFast Navigator. Theapplication interface is shown in the figure to the right.Step 1.Insert the software CD in your CD-ROM drive. The setup screen appears as shown in the figure to theright. If the setup screen does not appear automatically, run install.exe on the CD. Click WinFastNavigator CE to initialize the installation.- 18-
.Step 2.The Add/Remove Programs dialog box appears. An information box on top of it tells you the applicationis Retrieving application data from the mobile device.Step 3.The application will next determine the destination location. A dialog box appears asking if you want toinstall the application at the default location, which is Main Memory on your PDA/pocket PC. Click Yesto install WinFast Navigator at that location. Click No to change the location using the next dialog box(see the second figure) which contains a selection box with 2 destination options: Main Memory andiPAQ File Store. Select one as desired and then click OK.- 19-
- Page 1 and 2: .LEADTEK Wireless GPS ReceiverUser
- Page 3 and 4: .1. Introduction1.1. OverviewThe Le
- Page 5 and 6: .Output messageDefault output forma
- Page 7 and 8: .LED2GPS & Charge LEDDescriptionLED
- Page 9 and 10: .5.5 BatteryThis product uses a Lit
- Page 11 and 12: .2. BTWCE 1.1(1) Make sure that the
- Page 13 and 14: .(5) Back to the main form of BTW-C
- Page 15 and 16: .(7) As the connection being establ
- Page 17 and 18: .(3) Click the “Bluetooth Manager
- Page 19: .(7) Select the target and hold on
- Page 23 and 24: .Step 5.When the installation is co
- Page 25 and 26: .you have to get the authorized sof
- Page 27 and 28: . In the Folders pane of My Bluetoo
- Page 29: .Leadtek Research Inc.: 18F, 166, C
.Step 2.The Add/Remove Programs dialog box appears. An information box on top of it tells you the applicationis Retrieving application data from the mobile device.Step 3.The application will next determine the destination location. A dialog box appears asking if you want toinstall the application at the default location, which is Main Memory on your PDA/pocket PC. Click Yesto install WinFast Navigator at that location. Click No to change the location using the next dialog box(see the second figure) which contains a selection box with 2 destination options: Main Memory andiPAQ File Store. Select one as desired and then click OK.- 19-