LEADTEK Wireless GPS Receiver User's Manual
LEADTEK Wireless GPS Receiver User's Manual LEADTEK Wireless GPS Receiver User's Manual
.(4) Select “Search” to find target device, then BTW-CE will start to search nearbyBluetooth device.Finishing searching and “Leadtek Bluetooth GPS” found, select the target andsave it for selected group. In this case, the target device is saved to default group.Then click to save the target.- 10-
.(5) Back to the main form of BTW-CE, if there’re devices saved, the device listshould seen. Then double-click the target device, BTW-CE will start to search theservice provided by the target device for a while. After searching services, if thedevice is alive, there should be the name of SPP service on the action list.- 11-
- Page 1 and 2: .LEADTEK Wireless GPS ReceiverUser
- Page 3 and 4: .1. Introduction1.1. OverviewThe Le
- Page 5 and 6: .Output messageDefault output forma
- Page 7 and 8: .LED2GPS & Charge LEDDescriptionLED
- Page 9 and 10: .5.5 BatteryThis product uses a Lit
- Page 11: .2. BTWCE 1.1(1) Make sure that the
- Page 15 and 16: .(7) As the connection being establ
- Page 17 and 18: .(3) Click the “Bluetooth Manager
- Page 19 and 20: .(7) Select the target and hold on
- Page 21 and 22: .Step 2.The Add/Remove Programs dia
- Page 23 and 24: .Step 5.When the installation is co
- Page 25 and 26: .you have to get the authorized sof
- Page 27 and 28: . In the Folders pane of My Bluetoo
- Page 29: .Leadtek Research Inc.: 18F, 166, C
.(4) Select “Search” to find target device, then BTW-CE will start to search nearbyBluetooth device.Finishing searching and “Leadtek Bluetooth <strong>GPS</strong>” found, select the target andsave it for selected group. In this case, the target device is saved to default group.Then click to save the target.- 10-
Change language