WATTS Ball Valves - Clean My Water

WATTSBall Valves

IntroductionWatts Regulator Company offers a full line of quality ball valves for a wide range of applications asoutlined in this brochure. Ball valve types include brass, bronze, carbon steel, cast iron, gas, plasticand stainless steel, as well as electric motor valves for your customized project. Watts also offers afull range of ball valve options and accessories.Table of ContentsBrass Ball ValvesFULL PORT3-PieceB6800, B6801 . . . . . . . . . . . . . . . . . . . . . . . . 22-PieceFBV-3, FBVS-3 . . . . . . . . . . . . . . . . . . . . . . . . 3FBV-3C, FBVS-3C . . . . . . . . . . . . . . . . . . . . . 4FBV-4, FBVS-4 . . . . . . . . . . . . . . . . . . . . . . . . 5IT6300, IS6301 . . . . . . . . . . . . . . . . . . . . . . . 6STANDARD PORT2-PieceWBVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6WBV-3, WBVS-3 . . . . . . . . . . . . . . . . . . . . . . 7Bronze Ball ValvesFULL PORT2-PieceB6080, B6081 . . . . . . . . . . . . . . . . . . . . . . . . 8FBV, FBVS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9B6780, B6781 . . . . . . . . . . . . . . . . . . . . . . . . 9B6300, B6301 . . . . . . . . . . . . . . . . . . . . . . . 10STANDARD PORT2-PieceB6000, B6001 . . . . . . . . . . . . . . . . . . . . . . . 11B6002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12B6004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12B6010, B6011, B6012, B6013, B6014, B6015 13B6095 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14B6400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14UNIBODYB6100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Cast Iron Ball ValvesFULL PORT2-PieceG4000M1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 17G4000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18G4000-FDA. . . . . . . . . . . . . . . . . . . . . . . . . . 18Electric Motor ValvesEMVII-6400SS. . . . . . . . . . . . . . . . . . . . . . . . 19Gas Ball Valves2-PieceGBV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201-PieceGBV-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Specialty Ball ValvesBRV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21RPV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22IPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22PIPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Plastic Ball ValvesPBV Grey PVC . . . . . . . . . . . . . . . . . . . . . . . 24TPBV-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Carbon & Stainless Steel Ball ValvesFULL PORT2-PieceC-FBV-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16S-FBV-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

1Brass Ball ValvesSeries B6800, B68013-Piece, Full Port, Brass Ball ValvesSizes: 1 ⁄4" – 2" (8 – 50mm)Series B6800, B6801 3-Piece, Full Port, Brass Ball Valves feature an in-line maintenancedesign that offers serviceability of all operating parts without disturbing therigid pipeline system. The B6800 and B6801 full port orifice ensures maximum flowcapacity, while Durafill ® seats, chrome plated brass ball and blow-out proof stemprovide maximum safety and highest operating pressure/temperature limits.Features• 3-piece, lift-out design• Carbon/glass reinforced PTFE Durafill ®valve seats• Chrome plated brass ball• Blow-out proof, pressure retaining stem• High cycle life reinforced PTFE stempacking seal and thrust washer• Standard actuator mounting pads• Vinyl insulator on heavy duty, zinc platedcarbon steel handles• Low operating torque• Adjustable stem packing gland• Each valve factory testedB6800ModelsB68001 ⁄4" – 2" (8 – 50mm) threaded NPT end connectionsB68011 ⁄2" – 2" (15 – 50mm) solder end connectionsB6801OptionsSuffixZ15 – Less lever and nutXH – Extended lever handleG – Grounded ballGS – Grounded ball and stemSS – 316 Stainless steel ball and stemOV – Oval handleRH – Round handleSH – Stainless steel handle and nutPressure – TemperatureTemperature Range: 0°F – 450°F (-18°C – 232°C)Maximum Working Pressure:1⁄4" – 1" (8 – 25mm) 600psi (41.4 bar) WOG non-shock150psi (10.3 bar) WSP1 1 ⁄4" – 2" (32 – 50mm) 400psi (27.6 bar) WOG non-shock125psi (8.6 bar) WSPUse stainless steel trim (option SS) for steam pressures over150psi (10.3 bar).MaterialsA Handle Nut Zinc Plated Carbon SteelB Handle Zinc Plated Carbon Steel with VinylInsulatorC Packing Nut Brass ASTM B16, C36000D Stem Packing Glass Reinforced PTFEE Thrust Bearing Glass Reinforced PTFEF Stem Brass ASTM B16, C36000G Body Forged Brass ASTM B124H Seats Carbon/Glass ReinforcedPTFE Durafill ®I Ball Chrome Plated BrassJ Adapter Forged Brass ASTM B124K Body Bolts & Nuts Zinc Plated Carbon SteelL Body Seals PTFEFor additional information, request literature ES-B6800.SE – Safety exhaust (unidirectional),see literature ES-B6800SE01/VT – Virgin PTFE seat and sealBS – Balancing handle stopsLL – Latch-Lok handle (304 SS)TH – Tee handleLC – Latch-Lok handles latch andlock in “off” position only2JLHEFPressurebar psi41 60034 50028 40021 30014 2007 1003 50Exclusive Latch-Lok Handle(option LL)Valve Seat RatingI1⁄4"– 1" (8–25mm)1 1 ⁄4" – 2" (32–50mm)ABCDG100 200 300 400 500°F38 93 149 204 260°CHTemperatureLJK

Series FBV-3, FBVS-32-Piece, Full Port, Brass Ball ValvesSizes: 1 /4" – 3" (8-80mm)Series FBV-3, FBVS-3 2-Piece, Full Port, Brass Ball Valves are used in commercial andindustrial applications for a full range of liquids and gases. They feature a bottom-loadedblowout-proof stem, virgin PTFE seats, thrust washer, and adjustable stem packinggland, stem packing nut, chrome plated brass ball, brass adapter, and steel handle.Features• Suitable for a full range of liquids and gases• Minimal pressure drop due to full size ports• Bottom loaded, blow-out proof stem• Virgin PTFE stem packing seal, thrustwasher and seats• Vinyl insulator on heavy duty, zinc platedcarbon steel handlesModelsFBV-3Sizes 1 ⁄4" – 3" (8 – 80mm), NPT femaleconnectionsFBVS-3 Sizes 1 ⁄2" – 3" (15 – 80mm), solder connectionsFBV-3-UL/FM Sizes 1 ⁄4" – 2" (8 – 20mm), NPT femaleconnections, 300psi trim and drainFBV-3-SS Sizes 1 ⁄2" – 2" (15 – 50mm), NPT female connections,with stainless steel ball and stemFBVS-3-SS Sizes 1 ⁄2" – 2" (15 – 50mm), solder connections,with stainless steel ball and stemPressure – TemperatureTemperature Range: -40° F – 400° F (-40°C – 204°C)Maximum Working Pressure:FBV-3 and FBVS-31⁄4" – 2" (8 – 20mm) pressure rated at 600psi (41.4 bar) WOG(non-shock), and 150psi (10.3 bar) WSPFBV-3-UL/FM1⁄4" – 2" (8 – 20mm) pressure rated at 300psi (20.7 bar), UL/FMtrim and drain.FBV-32 1 ⁄2" and 3" (65 - 80mm) pressure rated at 600psi (41.4 bar)WOG (non-shock), and 125psi (8.6 bar) WSPFBVS-32 1 ⁄2" and 3" (65 - 80mm) pressure rated at 400psi (27.6 bar)WOG (non-shock), and 125psi (8.6 bar) WSPMaterialsA Handle Nut Zinc Plated Carbon SteelB Handle Zinc Plated Carbon Steel with VinylInsulatorC Packing Nut BrassD Stem Packing Virgin PTFEE Thrust Bearing Virgin PTFEF Stem Machined BrassG O-ring Fluorocarbon elastomer (FKM)H Body Forged Brass ASTM B124I Seats Virgin PTFEJ Ball Chrome Plated BrassK Adapter Forged Brass• Fast quarter-turn open or close operation• Low operating torque• Adjustable stem packing gland• Stem O-ring sealHEPressureValve Seat RatingFbar psi41 60034 50028 40021 30014 2007 1003 500 0FBV-3FBVS-31⁄4"– 2" (8–50mm)2 1 ⁄2" – 3" (65–80mm)( 1 ⁄2" – 2"only)50 100 200 300 400 500°F10 38 93 149 204 260°CAGDIBCJTemperatureIK( 1 ⁄2" – 3"only)( 1 ⁄2" – 2" only)1Brass Ball ValvesFor additional information, request literature ES-FBV-3.3

1Brass Ball ValvesSeries FBV-3C, FBVS-3C2-Piece, Full Port, Brass Ball ValvesSizes: 1 ⁄4" – 3" (8 – 80mm)Series FBV-3C 2-piece, full port, brass ball valves are used in commercial andindustrial applications for a full range of liquids and gases. They feature a bottomloadedblowout proof stem, virgin PTFE seats, thrust washer, and adjustable stempacking gland, stem packing nut, chrome plated brass ball, brass adapter, andsteel handle.Features• Certified to NSF/ANSI standard 61/8• CSA approved threaded valves only1⁄2" – 3" (15 – 80mm)• UL/FM approved threaded valves1⁄2" – 2" (15 – 50mm)• UL Listed solder valves 1 ⁄2" – 2"(15 – 50mm)• Metal-to-metal adapter body seal preventsadapter leaks• Fluorocarbon elastomer stem O-ringprevents stem leaks• Adjustable stem packing gland• Virgin PTFE stem packing seal, thrustwasher, and seats• Bottom loaded blowout proof stem• Machined chrome plated brass ball• Valves comply to MSS-SP-110 standardValve Seat Rating1⁄2" – 2"FBV-3C1⁄4" – 2"1⁄2" – 2" 1⁄2" – 2"FBVS-3CModelsFBV-3C: 1 ⁄4" – 3" (8 – 80mm) with threaded connectionsFBVS-3C: 1 ⁄2" – 3" (15 – 80mm) with solder connectionsPressure – TemperatureTemperature Range: -40ºF to 400ºF (-40ºC to 204ºC)Maximum Working Pressure:FBV-3C : 1 ⁄4" – 2" (8 – 50mm) 600psi (41.4 bar) WOG, non-shock150psi (10.3 bar) WSP2 1 ⁄2" – 3" (65 – 80mm) 600psi (41.4 bar) WOG, non-shock125psi (8.6 bar) WSPFBVS-3C : 1 ⁄2" – 2" (15 – 50mm) 600psi (41.4 bar) WOG, non-shock150psi (10.3 bar) WSP2 1 ⁄2" – 3" (65 – 80mm) 400psi (27.6 bar) WOG, non-shock125psi (8.6 bar) WSPMaterialsA. Handle Nut Zinc plated carbon steelB. Handle Zinc plated carbon steel withvinyl insulatorC. Packing Nut BrassD. Stem Packing Virgin PTFEE. Thrust Washer Virgin PTFEF. Stem Machined brassG. O-ring Fluorocarbon elastomer (FKM)H. Body Forged brassI. Seats Virgin PTFEJ. Ball Chrome plated brassK. Adaptor Forged brassHEFABCDIJGIKFor additional information, request literature ES-FBV-3C.4

Series FBV-4, FBVS-42-Piece, Full Port, Brass Ball ValvesSizes: 1 ⁄4" – 3" (8 – 80mm)Series FBV-4, FBVS-4 2-Piece, Full Port, Brass Ball Valves are suitable for a fullrange of liquids and gases in residential and commercial applications. Thesevalves feature an adjustable packing for longer service life, a bottom loaded blowoutproof stem for safety, a fluorocarbon elastomer stem O-ring to prevent stemleaking at installation, and are rated to 600psi WOG/150psi WSP ( 1 ⁄4" – 2") and400psi WOG/125psi WSP (2 1 ⁄2" – 3").FBV-41Brass Ball ValvesFeatures• Metal to metal adapter body seal• Full port design• Pressure rated at 600psi (41.4 bar)WOG non-shock and 150psi (10.3 bar)WSP ( 1 ⁄4" – 2") and 400psi (27.6 bar)WOG non-shock and 125psi (8.6 bar)WSP (2 1 ⁄2" – 3").• Bottom loaded, blow-out proof stem• Adjustable stem packing gland andstem O-ring• Virgin PTFE stem packing seal, thrustwasher, and seats• Vinyl insulator on heavy duty, zinc platedcarbon steel handle• Quarter-turn operation• Complies with MSS-SP-110FBVS-4ModelsFBV-4 1⁄4" – 3" (8 – 80mm) threaded end connectionsFBVS-4 1 ⁄2" – 3" (15 – 80mm) solder end connections*Pressure — TemperatureTemperature Range: -40ºF to 400ºF (-40ºC to 204ºC)Maximum Working Pressure:1⁄4" – 2" 600psi (41.4 bar) WOG non-shock; 150psi (10.3 bar) WSP2 1 ⁄2" – 3" 400psi (27.6 bar) WOG non-shock; 125psi (8.6 bar) WSPMaterialsA. Handle Nut Zinc plated carbon steelB. Handle Zinc plated carbon steelwith vinyl insulatorC. Packing Nut BrassD. Stem Packing Virgin PTFEE. Thrust Washer Virgin PTFEF. Stem Machined brassG. O-ring Fluorocarbon elastomer (FKM)H. Body Forged brassI. Seats Virgin PTFEJ. Ball Chrome plated brassK. Adaptor Forged brassFor additional information, request literature ES-FBV-4.APressureValve Seat Ratingbars psi41.3 60034.5 50027.6 4001⁄4" – 2"2 1 ⁄2" – 3"20.7 30013.8 2006.9 1003.4 500 050 100 200 300 400 500 °F10 38 93 149 204 260 °CTemperatureBCDHEIJIKFG5

1Brass Ball ValvesSeries IT6300, IS63012-Piece, Full Port, Ball and Waste Brass Ball ValvesSizes: 1 ⁄2" – 1" (15 – 25mm)Series IT6300, IS6301 2-Piece, Full Port, Ball and Waste Brass Ball Valves featurea side drain port to drain or vent downstream line when the valve is in the offposition. The IT6300 and IS6301 full port orifice ensures maximum flow capacityand its ball is wiped clean during each operation of the valve.Features• Drain port allows draining or venting ofdownstream line when valve is in theoff position• Full port• Virgin PTFE valve seats are standard.Suitable for a full range of liquids andgases. Consult factory for specificapplicationsModelsIT6300IS63011 /2" – 1" (15 – 25mm) threaded NPT end connections1 /2" – 2" (15 – 25mm) solder end connectionsPressure — TemperatureTemperature Range: 0°F – 350°F (–18°C – 176°C)Maximum Working Pressure: 600psi (41.4 bar) WOG non-shock• Ball is wiped clean during eachoperation of the valve• Blow-out proof, pressure retaining stem• Vinyl insulator on heavy duty handles• Fast, quarter-turn open or close operation• Low operating torque• Adjustable stem packing glandIT6300IS6301For additional information, request literature ES-IT6300.Series WBVC2-Piece, Standard Port, Brass Ball ValvesSizes: 1 /2" – 1" (15 – 25mm)Series WBVC 2-Piece, Standard Port, Brass Ball Valves are ideal for a full range ofliquids in commercial, residential and industrial applications. This Series featuresmale NPT compression connections and a brass body.WBVCFeatures:• Male NPT compression connections• Brass body• Ideal for a full range of liquids incommercial, residential and industrialapplicationsPressure – TemperatureTemperature Range: 40˚F – 366˚ F (4˚ C – 186˚ C)Maximum Working Pressure: 400psi (27.6 bar) WOG non-shock;150psi (10.3 bar) WSPFor additional information, request literature ES-WBVC.6

Series WBV-3, WBVS-32-Piece, Standard Port, Brass Ball ValvesSizes: 1 ⁄8" – 4" (3 – 100mm)Series WBV-3, WBVS-3 2-Piece, Standard Port, Brass Ball Valves feature a bottomloaded blow-out proof stem, virgin PTFE seats & stem packing and anadjustable stem packing nut.Features• Suitable for a full range of liquids andgases• Bottom loaded blow-out proof stem• Virgin PTFE stem packing seal• Adjustable stem packing glandModelsWBV-3WBVS-31⁄8" – 4" (3 – 100mm) threaded FIP end connections3⁄8" – 3" (10 – 80mm) solder end connections• Vinyl insulator on heavy duty zinc platedcarbon steel handles• Quarter-turn open or close operation• Low operating torqueWBV-31Brass Ball ValvesKit OptionsITHK – Tee handle kitIOHK – Oval handle kitSXI-HK – Stem Extension KitMSI-HK – Memory Stop KitPressure – TemperatureTemperature Range: -20°F – 302°F (-29°C – 150°C) at 50psi (3.4 bar)Maximum Working Pressure: 400psi (27.6 bar) WOG non-shockFor additional information, request literature ES-WBV-3WBVS-37

2Series B6300, B63012-Piece, Full Port, Bronze Ball & Waste Ball ValvesSizes: 1 ⁄2" – 1" (15 – 25mm)Series B6300, B6301 2-Piece, Full Port, Bronze Ball & Waste Ball Valves feature adrain port to allow for draining or venting of downstream line when valve is in theoff position. The B6300 and B6301 full port orifice ensures minimal pressure drop,while virgin PTFE seats and chrome plated brass ball provide lasting service.B6300Bronze Ball ValvesFeatures• Drain port allows draining or venting ofdownstream line when valve is in theoff position• Minimal pressure drop due to full size ports• Virgin PTFE seats are standard• Ball is wiped clean during each operationof the valve• Blowout proof pressure retaining stem• Handle can be repositioned 180°• High cycle life reinforced PTFE stempacking seal and thrust washer• Vinyl insulator on heavy duty, zinc-platedcarbon steel handles• Fast quarter-turn open or close operation• Low operating torque• Adjustable stem packing gland• Each valve factory tested• Valve is unidirectional (one-way) due todrain port on downstreamB6301ModelsB63001 ⁄2" – 1" (15 – 25mm) threaded NPT end connectionsB63011 ⁄2" –1" (15 – 25mm) solder end connectionsOptionsSuffixOV – Oval handleRH – Round handleSH – Stainless steel handle & nutTH –XH –Tee handleExtended lever handlePressure — TemperatureTemperature Range: 0°F – 350°F (-18°C – 177°C)Maximum Working Pressure: 400psi (27.6 bar) WOG non-shockFor additional information, request literature ES-B6300.10

Series B6000, B60012-Piece, Standard Port, Bronze Ball ValvesSizes: 1 ⁄4" – 4" (8 – 100mm)Series B6000, B6001 2-Piece, Standard Port, Bronze Ball Valves feature ablowout proof pressure retaining stem. The B6000 and B6001 standard port orificeensures minimal pressure drop, while Durafill ® and Uniseal ® seats and chromeplated brass ball provide lasting service for a wide range of liquids and gases.Features• Durafill ® (carbon/glass filled PTFE) seatsfor sizes 1 ⁄4" – 1 ⁄2" (8 – 15mm) and 1 1 ⁄4" –4" (32 – 100mm) and Uniseal ®(enhanced PTFE) seats for sizes 3 ⁄4" & 1"(20 & 25mm) for lasting service for awide range of liquids and gases• Chrome plated brass ball is wiped cleanduring each operation of the valve• Minimal pressure drop due to large portsModelsB6000B6001OptionsSuffix1 ⁄4" – 4" (8 – 100mm) threaded NPT end connections3 ⁄8" – 3" (10 – 80mm) solder end connections01/VT- Virgin Teflon ® seat materialCC- 3⁄4" (20mm) hose thread outlet.Cap & chain has hose thread outlet.Inlet sizes: 1 ⁄2" and 3 ⁄4" (15-20mm)NPT. Also 1 ⁄2" and 3 ⁄4" (15-20mm)solder inlet connectionSS- 316 stainless steel ball and stemLH- Locking lever handleOV- Oval handleOVLH- Oval locking handleRH- Round HandleSH- Stainless steel handle and nutBS- Balance stop plateXH- Extended lever handlePressure – TemperatureTemperature Range: 0°F – 450°F (-18°C – 232°C) @ 50psi (3.4 bar)Maximum Working Pressure:1⁄4" – 3" (8 – 80mm): 600psi (41.4 bar) WOG non-shock; 150psi (10.3 bar) WSP4" (100mm): 400psi (27.6 bar) WOG non-shock; 125psi (8.6 bar) WSPUse stainless steel trim (option SS) for steam pressures over 150psi (10.3 bar).MaterialsA Handle Nut Zinc Plated Carbon SteelB Handle Zinc Plated Carbon Steel with Vinyl InsulatorC Packing Nut Brass ASTM B16, C36000D Stem Packing Glass Reinforced PTFEE Thrust Washer Glass Reinforced PTFEF Stem Brass ASTM B16, C36000G Body Cast Bronze ASTM B584, C84400H Seats Durafill ® ( 1 ⁄4" – 1 ⁄2" & 1 1 ⁄4" – 4"); Uniseal ® ( 3 ⁄4" & 1")I Ball Chrome Plated Brass ASTM B16, C36000J Adapter Brass ASTM B16, C36000K Body Seals PTFE (1 1 ⁄4" – 4" only) - Not shownFor additional information, request literature ES-B6000.• Blowout proof, pressure retaining stem• High cycle life reinforced PTFE stempacking seal and thrust washer• Vinyl insulator on heavy duty, zinc-plated,carbon steel handles• Quarter-turn open or close operation• Low operating torque• Adjustable stem packing gland• Each valve factory testedTH- Tee handles 1 ⁄4" – 2" (8 – 50mm)GS- Grounded stemSE- Safety ExhaustSC- Satin chrome 1 ⁄4" – 2" (8 – 50mm)Z15- Less lever and nut04- Mineral filled PTFE seats andseals (available only with 316SSball and stem)UL- UL approved as follows:- Flammable Liquids (YRBX)- LP Gas (YSDT)- Compressed Gas (YQNZ)- Natural/Manufactured Gas (YRPV)- Fire Protection (HNFX)- For #1/#2 Fuel Oils (MHKZ)GEFB6000B6001Valve Seat RatingPressurebar psi41 60034 50028 40021 30014 2007 1003 501⁄4" – 3" (8 – 80mm)4" (100mm)100 200 300 400 500 °F38 93 149 204 260 °CABCD4" withVirgin PTFETemperatureHIHJ2Bronze Ball Valves11

Series B60022-Piece, Standard Port, Bronze Ball ValvesSizes: 1 ⁄4" – 1" (8 – 25mm)2Series B6002 2-Piece, Standard Port, Bronze Ball Valves are special versions ofthe B6000 Series with male NPT threads at one end. These valves are specificallydesigned for use on manifold systems, OEM applications or other situationswhere it is desirable to install the ball valve directly to a female NPT connection.B6002Bronze Ball ValvesFeatures• Durafill ® (carbon/glass filled PTFE) seatsfor sizes 1 ⁄4" – 1 ⁄2" (8-15mm); Uniseal ®(enhanced PTFE) seats for sizes 3 ⁄4" &1" (20 & 25mm) for longer lasting seatsin high or low temperature applications• Suitable for a full range of liquids andgases• Chrome plated brass ball is wiped cleanduring each operation of the valve• Minimal pressure drop due to large ports• Blowout proof, pressure retaining stem• NPT threaded female inlet x NPTthreaded male outlet• Quarter-turn open or close operation• High cycle life reinforced PTFE stempacking seal and thrust washer• Vinyl insulator on heavy duty, zinc-plated,carbon steel handle• Low operating torque• Adjustable stem packing gland• Each valve factory testedOptionsFor a list of available options, request literature ES-B6002.Pressure — TemperatureTemperature Range: -20°F – 450°F (-29°C – 232°C) @ 50psi (3.4 bar)Maximum Working Pressure: 600psi (41.4 bar) WOG non-shock; 150psi (10.3 bar) WSPFor additional information, request literature ES-B6002.Series B60042-Piece, Standard Port, Bronze Ball ValvesSizes: 1 ⁄2" – 1" (15 – 25mm)Series B6004 2-Piece, Standard Port, Bronze Ball Valves feature a barbed hoseconnection at one end sized to accept standard hose I.D. matching valve pipesize and a female threaded connection at the other end. The B6004 series is idealin applications where a flexible hose will be used downstream of the valve, eliminatingthe need for adaptors.B6004Features• Durafill ® (carbon/glass filled PTFE) seatsfor size 1 ⁄2" (15mm) and Uniseal ®(enhanced PTFE) seats for sizes 3 ⁄4" &1" (20 & 25mm) for lasting service for awide range of liquids and gases• Chrome plated brass ball is wiped cleanduring each operation of the valve• Blowout proof, pressure retaining stem• High cycle life reinforced PTFE stempacking seal and thrust washer• Vinyl insulator on heavy duty, zinc-plated,carbon steel handles• Quarter-turn open or close operation• Low operating torque• Adjustable stem packing glandOptionsFor a list of available options, request literature ES-B6004.Pressure – TemperatureTemperature Range: 0°F – 450°F (-18°C – 232°C) @ 50psi (3.4 bar)Maximum Working Pressure: 600psi (41.4 bar) WOG non-shock; 150psi (10.3 bar) WSPUse stainless steel trim (option SS) for steam pressures over 150psi (10.3 bar).For additional information, request literature ES-B6004.12

Series B6010, B6011, B6012,B6013, B6014, B60152-Piece, Standard Port, Bronze Ball ValvesSizes: 1 ⁄2" – 2" (15 – 50mm)Series B6010, B6011, B6012, B6013, B6014, B6015 2-Piece, Standard Port,Bronze Ball Valves feature a blowout proof pressure retaining stem. The B6010,B6011, B6012, B6013, B6014 and B6015 standard port orifice ensures minimalpressure drop, while Durafill ® and Uniseal ® seats and chrome plated brass ballprovide lasting service for a wide range of liquids and gases.Features• Designed for quick and easy cleaningor replacement of worn parts withoutdismantling pipe line• Chrome plated brass ball is wiped cleanduring each operation of the valve• Minimal pressure drop due to largeports• Blowout proof, pressure retaining stem• High cycle life reinforced PTFE stempacking seal and thrust washerModelsB6010B6011B6012B6013B6014B6015• Vinyl insulator on heavy duty, zinc-plated,carbon steel handles• Quarter-turn open or close operation• Low operating torque• Adjustable stem packing gland• Each valve factory tested1 ⁄2" – 2" (15 – 50mm) threaded NPT end connections1 ⁄2" – 2" (15 – 50mm) solder end connections1 ⁄2" – 2" (15 – 50mm) solder end x threaded end female union1 ⁄2" – 1" (15 – 25mm) solder end x threaded end male union1 ⁄2" – 1" (15 – 25mm) threaded end female x threadedend male union1 ⁄2" – 2" (15 – 50mm) threaded end female x solder unionB6010B6011B6012B60132Bronze Ball ValvesOptionsSuffixSS – Stainless steel ball and stem01/VT – Virgin Teflon ® seat materialPressure – TemperatureTemperature Range: 0°F – 225°F (-18°C – 107°C)Maximum Working Pressure: 600psi (41.4 bar) WOG non-shock for threaded end and400psi (27.6 bar) WOG non-shock for solder end @ 100°F (38°C). Not rated for steamservice due to union end gasket.For additional information, request literature ES-B6010.B6014B601513

2Bronze Ball ValvesSeries B60952-Piece, Standard Port, Threaded One-WayBronze Ball Valves with Integral CheckSizes: 1 ⁄2" – 2" (15 – 50mm)Series B6095 2-Piece, Standard Port, Threaded One-Way Bronze Ball Valves withIntegral Check feature a cam lock smart ball check valve insert manufacturedfrom polymer materials, NBR rubber and stainless steel spring. The checkmodule is rated to 235psi (16.2 bar) CWP.Features• Minimal pressure drop• Compact• Reduces number of potential leak points• Reduces assembly time• Self-cleaning check module• Bubble tight sealing in low or highbackpressure conditions –soft seatedPressure – TemperatureTemperature Range: 32°F - 160°F (0°C – 71°C)Maximum Working Pressure: 235psi (16.2 bar) CWPSeries B64002-Piece, Standard Port, Bronze Ball ValvesSizes: 1 ⁄4" – 4" (8 – 100mm)Series B6400 2-Piece, Standard Port, Bronze Ball Valves comestandard with actuator mounting pads, Durafill ® (carbon/glass filled PTFE) seats,bottom loaded blowout proof stem, chrome plated brass ball, and adjustablestem packing to provide lasting service for a wide range of liquids and gases.Features• Actuator mounting pads• Latch-Lok handle available (suffix LL)• Durafill ® (carbon/glass filled PTFE) seatsare standard for longer lasting seats inhigh or low temperature applications• Suitable for a full range of liquidsand gases• Chrome plated brass ball is wiped cleanduring each operation of the valveOptionsSuffixLC –LL –RH –SE –SH –SS –Lever latches and locks in closedposition onlyLever latches and locks in openand closed positionsRound handleSafety exhaust port (see literatureES-B6400-SE)Stainless steel handle and nut316SS ball and stem• Cost effective• Patented check design• One-way ball can be used in 2-pieceand 3-piece ball valves• Durafill ® (carbon/glass filled PTFE) seatsfor sizes 1 /2" and 1 1 /4" – 2" (15 and 32-50mm) Uniseal ® (enhanced PTFE) seatsfor sizes 3 /4" & 1" (20 & 25mm)• Blowout proof pressure retaining stem• High cycle life reinforced PTFE stempacking seal and thrust washer• Vinyl insulator on heavy duty, zinc-plated,carbon steel handles• Adjustable stem packing gland• Each valve factory testedTH – Tee handleUL- UL approved as follows:- Flammable Liquids (YRBX)- LP Gas (YSDT)- Compressed Gas (YQNZ)- Natural/Manufactured Gas (YRPV)- Fire Protection (HNFX)- For #1/#2 Fuel Oils (MHKZ)01/VT – Virgin Teflon ® seat materialXH – Extended lever handlePressure – TemperatureTemperature Range: -55°F – 450°F (-49°C – 232°C) @ 50psi (3.4 bar)Maximum Working Pressure:1⁄4" – 2" (8 – 50mm): 600psi (41.4 bar) WOG non-shock; 150psi (10.3 bar) WSP2 1 ⁄2" – 4" (65 – 100mm): 400psi (27.6 bar) WOG non-shock; 125psi (8.6 bar) WSPB6095Patented Cam Lock Smart BallCheck Valve InsertFor additional information, requestliterature ES-B6095.B6400B6400LLFor additional information, requestliterature ES-B6400.14

Series B6100Unibody, Standard Port, Bronze Ball ValvesSizes: 1 ⁄4" – 2" (8 – 50mm)Series B6100 Unibody, Standard Port, Bronze Ball Valves feature unibody endentry construction and a bottom loaded pressure retaining stem. The B6100’sstandard port orifice ensures minimal pressure drop, while virgin Teflon ® seatsand brass ball provide lasting service for a wide range of liquids and gases.Features• Virgin Teflon ® valve seats are standardfor lasting service for a wide range ofliquids and gases• Brass ball is wiped clean during eachoperation of the valve• Unibody end entry construction• Bottom loaded pressure retaining stem• High cycle life reinforced PTFE stempacking seal and thrust washer• Vinyl insulator on heavy duty, zinc-plated,carbon steel handles• Quarter-turn open or close operation• Low operating torque• Adjustable stem packing gland• Each valve factory testedB61002Bronze Ball ValvesOptionsSuffixSS – 316 stainless steel ball and stemOV – Oval handleRH – Round handleSH – Stainless steel handle and nutUL –BS –XH –TH –UL approved under: YRPVBalance stop plateExtended lever handleTee handlePressure – TemperatureTemperature Range: -55°F - 350°F (-48°C – 177°C) @ 50psi (3.4 bar)Maximum Working Pressure: 600psi (41.4 bar) WOG; 125psi (8.6 bar) WSPFor additional information, request literature ES-B6100.15

Series C-FBV-12-Piece, Full Port, Carbon Steel Ball ValvesSizes: 1 ⁄4" – 3" (8 – 80mm)Series C-FBV-1 2-Piece, Full Port, Carbon Steel Ball Valves are suitable for a fullrange of liquids and gases. The C-FBV-1’s full port orifice ensures maximum flowcapacity, while reinforced PTFE seats, PTFE stem packing, thrust washer and bodyseal provide maximum safety and high operating pressure/temperature limits.C-FBV-13Carbon & Stainless Steel Ball ValvesFeatures• Full port design• Adjustable stem packing• Bottom loaded, blowout proof stem• Drilled and tapped mounting pads• PTFE stem packing, thrust washer andbody seal• Reinforced PTFE seat• Vinyl insulator on heavy duty 304SShandles• Low operating torque• Each valve factory tested• Standard Latch-Lok handle to lock inopen or close position• Conforms to MSS-SP-110 and API-598Pressure – TemperatureTemperature Range: 0°F - 400°F (-18°C – 204°C)Maximum Working Pressure: 1000psi (69.0 bar) WOG non-shock; 125psi (8.6 bar) WSPFor additional information, request literature ES-C-FBV-1.Series S-FBV-12-Piece, Full Port, Stainless Steel Ball ValvesSizes: 1 ⁄4" – 3" (8 – 80mm)Series S-FBV-1 2-Piece, Full Port, Stainless Steel Ball Valves are suitable for a fullrange of liquids and gases.The S-FBV-1’s full port orifice ensures maximum flowcapacity, while reinforced PTFE seats, PTFE stem packing, thrust washer and bodyseal provide maximum safety and high operating pressure/temperature limits.S-FBV-1Features• Adjustable stem packing• Bottom loaded, blowout proof stem• Drilled and tapped mounting pads• Standard Latch-Lok handle to lock inopen or close position• PTFE stem packing, thrust washer andbody seal• Reinforced PTFE seat• Vinyl insulator on heavy duty 304SShandles• Low operating torque• Each valve factory tested• Conforms to MSS-SP-110 and API-598Pressure – TemperatureTemperature Range: 0˚F – 400˚F (-18˚C – 204˚C)Maximum Working Pressure: 1000psi (69.0 bar) WOG non-shock; 125psi (8.6 bar) WSPFor additional information, request literature ES-S-FBV-1.16

Series G4000M12-Piece, Full Port, Cast Iron Flanged Ball ValvesSizes: 2" – 6" (50 – 150mm)Series G4000M1 2-Piece, Full Port, Cast Iron Flanged Ball Valves feature a stainlesssteel ball and stem with 200psi (13.8 bar) CWP and 125psi (8.6 bar) WSP rating.These valves are ideal to replace old cast iron gate valves and feature reliablequarter-turn ball valve technology.Features• Full port• Same end-to-end dimensions asconventional flanged iron gate valves(ANSI 16.10)• Quarter-turn open or close operation(Series G4000M1) or manual gear operatorfor slow open or close operation(Series G4000M1-GO)• Stainless steel ball and stem• Positive shutoff• 2-piece body constructionG4000M1Pressure – TemperatureMaximum Temperature: 353°F (178°C)Maximum Working Pressure: 200psi (13.8 bar) CWP; 125psi (8.6 bar) WSPValve Seat Ratingbar psi17 25014 20010 150G4000M1-GO4Cast Iron Ball Valves7 1003 500 00 50 100 150 200 250 300 350 400 450 °F-18 10 38 66 93 121 149 177 204 232 °CMaterials1. Body Cast Iron, ASTM A126 Class B2. Ball 304 Stainless Steel, ASTM A3513. Seat PTFE4. Stem 304 Stainless Steel, AISI 3045. Packing PTFE6. Gland Cast Iron, ASTM A126 Class B7. Gasket PTFE8. Bolt and Nut Steel, ASTM A69. Stop Plate Steel Plated, ASTM A610. Stop Washer Stainless Steel, AISI 30411. Handle or Ductile Iron, ASTM A439Gear Operator Waterproof Cast Iron12. Hex Socket andHead Bolt Steel, ASTM A6For additional information, request literature ES-G-4000M1 orES-G-4000M1-GO.96513210111247817

Series EMVII-6400SS2-Piece, Standard Port, Bronze ElectricMotor ValvesSizes: 1 /4" – 3" (8 – 80mm)Series EMVII-6400SS 2-Piece, Standard Port, Bronze Motorized Ball Valves consistof an electrically actuated motor available in 115 or 24 VAC models and featuresvisual position indicator, manual override, and can be mounted in any position.The EMVII-6400SS ball valve features a 316 stainless steel ball and stem,Durafill ® PTFE seats, stem packing, thrust washer and an adjustable packing nut.Features• 316 stainless steel ball and stembottom loaded blowout proof stem• Durafil ® PTFE seats• Adjustable PTFE packing• Hole in stem slot of each ball valve toequalize pressure between the bodycavity and the flow stream• 115 VAC or 24 VAC motor• 25% duty cycle 1 /4" – 1 1 /2" (8 – 50mm)and 75% duty cycle 2" – 3" (50 – 80mm)• Standard auxiliary SPDT switch, 10amps rating @ 115 VAC• Adjustable cam provides the capabilityof properly aligning the ball in both theopen and closed position using a single,simple adjustment• Accessible, clearly marked integral terminalstrip assures fast, easy wiring• Standard position indicator• Manual override standard• Motor can be changed without drainingsystem• Mountable in any position• Completely assembledPressure — TemperatureMaximum Temperature: 150° F (66° C)Maximum Working Pressure:1/4" – 2" (8 – 50mm): 600psi (41.4 bar) WOG; 100psi (6.9 bar) WSP2 1 /2" and 3" (65 and 80mm): 400psi (27.6 bar) WOG; 100psi (6.9 bar) WSPOperating Data115 VAC5 amps max @ 40 sec. cycle time 1 /4" – 1 1 /2" (8 – 40mm).75 amp max @ 5 sec. cycle time 2" (50mm).50 amp max @ 25 sec. cycle time 2 1 /2" and 3" (65 and 80mm)24 VAC2.2 amps max @ 40 sec. cycle time 1 /4" – 1 1 /2" (8 – 40mm)4.0 amps max @ 5 sec. cycle time 2" (50mm)3.0 amp max @ 25 sec. cycle time 2 1 /2" and 3" (65 and 80mm)EMVII-6400SS5Electric MotorvalvesApplications• Zone control valve for space heating with hot water or steam• Zone control valve for air conditioning with chilled water• Remotely operated valve for control of process liquids or gases (ie: steam, water or air)• Drain or blow-down valve to eliminate water from compressed air lines and systemsFor additional information, request literature ES-EMVII-6400SS.19

Series GBV2-Piece, Brass Gas Ball ValvesSizes: 3 /8" – 1" (10 – 25mm)Series GBV 2-Piece, Brass Gas Ball Valves are used in residential applications formanufactured natural gas and LP gas on in-house and indoor piping systems. Theyfeature a brass ball and stem, PTFE seats and packing, brass end piece and plug,and zinc alloy handle. Series GBV complies with ANSI standards for gas piping andis UL, CSA, and MEA approved.Features• 2-piece body• UL approved @ 5psi (34 kPa)• Approved by CSA @ 1 ⁄2, 2 and 5psi(3, 14 and 34 kPa)• Tested under standards Z21.15IAS requirementModelsGBVGBV-SQHGBV-FLGBV-ST3⁄8" – 1" (10 – 25mm) threaded female NPT end connections and tee handle3 ⁄8" – 1" (10 – 25mm) threaded female NPT end connections and square handle1/2" x 3 ⁄8", 1 /2" x 1 /2", 3 ⁄4" x 5 /8" (15 x 10, 15 x 15, 20 x 16mm) threadedfemale NPT x flare end connections and tee handle1/2" x 1 /2", 3 ⁄4" x 3 ⁄4" (15 x 15, 20 x 20mm) threaded female NPT endconnections and side tapPressure – TemperatureTemperature Range: -20° F – 125° F (-29° C – 52° C)Maximum Working Pressure: 5psi (34 kPa) WOG non-shockGBVGBV-STGBV-FLFor additional information, request literature ES-GBV.6Gas Ball ValvesSeries GBV-11-Piece, Brass Gas Ball ValvesSizes: 1 /2" and 3 /4" (15 and 20mm)Series GBV-1 1-Piece, Brass Gas Ball Valves are used in residential applicationsfor manufactured natural gas and LP gas on in-house and indoor piping systems.They feature a blowout proof stem design, brass ball and stem, PTFE seats,brass retainer and cap, rubber O-ring, and aluminum handle. Series GBV-1 complieswith ANSI standards for gas piping and is UL and CSA approved.Features• Patented blowout proof stem design• 1-piece bodyPressure – TemperatureTemperature Range: -20° F – 125° F (-29° C – 52° C)Maximum Working Pressure: 5psi (34 kPa) WOG non-shockGBV-1For additional information, request literature ES-GBV-1.20

Series BRVCombination Ball Valve and Relief ValveSizes: 3 ⁄4" – 1" (20 – 25mm)Series BRV, Combination Ball Valve and Relief Valve is an easy to install two-inonedevice. Designed to be used as water heater shutoff valve to provide both ameans to shut off the water supply to the water heater and to provide protectionagainst excess water pressure caused by thermal expansion.These valves use a bronze body full port valve design* which includes PTFEseats and a blow out proof stem design. The relief valve section includes a Viton ®ball and stainless steel spring. It is provided with a compression or PEX end fittingto provide a secure method of connecting a discharge line.Features• Easy Installation - Installs in any position• Low profile design• Full port ball valve with virgin PTFE seats• Blowout proof stem• Stainless steel spring/Viton ® ball reliefvalve components• Secure drain tube connection availablewith PEX or compression fitting modelsBRVTTHD x THD x CompressionBRVPPEX x PEX x CompressionTemperature — Pressure RatingMaximum Temperature: 210°F (99°C)Maximum Working Pressure: Valve body rated to 400psi (27.6 bar)BRVPxTxPPEX x THD x PEXStandardsListed by IAPMO*PEX end connectors reduce full port to reduced port dimensions.Typical InstallationWatts T&PRelief ValveDrain TubeWatts Test Plugand GaugeWatts BackflowPreventerWatts ShutoffWater MeterBallValveReliefValveWatts VacuumRelief ValveHot tosystemWattsTemperingValveWattsWaterHeaterStrapsAvailable ModelsInletSweatSweatThreadPEXPEXPEXPEXPEXThreadSweatPEXSweatThreadPEXPEXPEXSweatThreadOutletSweatSweatThreadPEXThreadThreadSweatSweatPEXPEXPEXSweatThreadPEXSweatThreadPEXPEXRelief OutletPEXCompressionCompressionCompressionCompressionPEXCompressionPEXCompressionCompressionPEXBarbBarbBarbBarbBarbBarbBarb7Specialty Ball ValvesColdWatts Water PressureReducing ValveWatts WaterHeater StandFor additional information, request literature ES-BRV.21

Series RPVResidential Purge, Drain and Balancing ValvesSizes: 3 /4" – 1 1 /4" (20 – 32mm)Series RPV Residential Purge, Drain and Balancing Valves provide unique and lowcost solution for start-up purging, balancing and draining of hydronic heating loops.Using a rugged, dual-ball valve design, the small and compact RPV facilitates highvolume purging, accurate balancing, tight shutoff and hose connection for drainingand purging.Features• One-piece construction – no extra assembly required• Maximum air purging – purges 500 foot loop in approximately 10 seconds• Positive shutoff dual-ball valve design – tight seal on balance port maximizes purging• New 90° models allows tight to wall mountings• New SM models allows direct connection to standard pump flangeModelsRPV-TRPV-SRPV-TSRPV-STRPV-SMfemale NPT inlet x female NPT outlet, 3 /4" (20mm)solder inlet x solder outlet, 3 /4", 1", 1 1 /4" (20, 25, 32mm)female NPT inlet x solder outlet, 3 /4" (20mm)solder inlet x female NPT outlet, 3 /4" (20mm)solder inlet x male NPT outlet, 3 /4", 1", 1 1 /4" (20, 25, 32mm)Pressure – TemperatureMaximum Inlet Temperature: 250°F (121°C)Maximum Working Pressure: 50psi (344 kPa)1 1 /4 " RPV-S-903/4 " RPV1 " RPV-S-90For additional information, request literature ES-RPV.*Available as 90° with tee handle ( 3 /4", 1") or lever handle (1 1 /4") 90° orientation frompurge outlet. (Standard models 180° orientation)1 1 /4 " RPV-SM-907Specialty Ball ValvesSeries IPFIsolation Pump Flanges for Circulator PumpsSizes: 1 ⁄2" – 2" (15 – 50mm)Series IPF Isolation Pump Flanges are designed to isolate circulator pumps tofacilitate circulator pump replacement or repairs.Features• Brass body and flange• Virgin PTFE seats• Bottom loaded, blowout proof stemModelsIPF-TIPF-S1⁄2" – 2" (15 – 50mm) NPT threaded end connection1⁄2" – 1 1 ⁄2" (15 – 40mm) Solder end connection• Dual Buna-N stem O-rings• Vinyl insulator on plated steel handle• Quarter-turn open or close operationIPF-SPressure – TemperatureMaximum Temperature: 406°F (208°C) at 100psi (6.9 bar)Maximum Working Pressure: 600psi (41.4 bar) WOGFor additional information, request literature ES-IPF.IPF-T22

Series PIPFIsolation Pump Flanges with Purge Port &Swivel FlangeSizes: 3 ⁄4" – 1 1 ⁄4" (20-32mm)Series PIPF Isolation Pump Flanges with Purge Port & Swivel Flange aredesigned to provide circulator pump isolation to facilitate circulator pumpreplacement or repair while the integral purge port facilitates system purging.Features:• Ball valve isolation for circulator pumps• Integral purge port saves time and money compared topurge stations made with ball valves, boiler drains, andcopper tees• Swivel flange allows purge port to be positioned for optimalpurging convenience• Brass body and flange• Pressure rated to 400psi (27.6 bar) WOG• Double O-ring stem sealing technology eliminates packingleaks• Bottom loaded, blowout, proof stemModels:PIPF-TPIPF-S3 ⁄4" – 1 1 ⁄4" (20-32mm) threaded NPT end connections3 ⁄4" – 1 1 ⁄4" (20-32mm) solder end connectionsPIPF-SPIPF-TPressure – TemperatureMaximum Temperature: 406°F (208°C) @ 100psi (6.9 bar)Maximum Working Pressure: 400psi (27.6 bar) WOGSpecialty Ball Valves723

Series PBVGrey Schedule 80 PVC Plastic Ball ValvesSizes: 1 ⁄2" – 2" (15 – 50mm)Series PBV Grey Schedule 80 PVC Plastic Ball Valves provide excellent corrosion andchemical resistance in residential and commercial water systems, wastewater, watertreatment, swimming pools, or industrial applications.PBV-TFeatures• Excellent corrosion and chemicalresistance• PTFE seats and O-ring sealModelsPBV-TPBV-SGrey PVC Threaded ConnectionsGrey PVC Socket ConnectionsPressure – TemperatureMaximum Temperature: 73°F (23°C)Maximum Working Pressure: 150psi (10.3 bar)For additional information, request literature ES-PBV.• Designed for Schedule 80 applications• Will fit in Schedule 40 pipe• NSF approvedSeries TPBV-DTrue Union, Schedule 80PVC Plastic Ball ValvesSizes: 1 ⁄2" – 2" (15 – 50mm)Series TPBV-D True Union Schedule 80 PVC Plastic Ball Valves are designed forcommercial or industrial applications requiring excellent corrosion or chemicalresistance. Valves are assembled with socket weld connections. Two threadedconnectors are included at no extra charge to allow choice of end connections.TPBV-D8Plastic Ball ValvesFeatures• PTFE seats, EPDM body seal,O-ring seal and stem seal• Full port design• NSF approvedPressure – TemperatureMaximum Temperature: 73°F (23°C)Maximum Working Pressure: 150psi (10.3 bar)For additional information, request literature ES-TPBV-D.24

For Technical Assistance Call Your Authorized Watts Agent.Telephone #Fax #HEADQUARTERS: Watts Regulator Company 815 Chestnut St., North Andover, MA 01845-6098 U.S.A. 978 688-1811 978 794-1848NorthEastMidAtlanticEdwards, Platt & Deely, Inc. 271 Royal Ave., Hawthorne, NJ 07506 973 427-2898 973 427-4246Edwards, Platt & Deely, Inc. 368 Wyandanch Ave., North Babylon, NY 11703 631 253-0600 631 253-0303W. P. Haney Co., Inc. 51 Norfolk Ave., South Easton, MA 02375 508 238-2030 508 238-8353J. B. O’Connor Company, Inc. P.O. Box 12927, Pittsburgh, PA 15241 724 745-5300 724 745-7420RMI Glenfield Bus. Ctr., 2535 Mechanicsville Tpk., Richmond, VA 23223 804 643-7355 804 643-7380The Joyce Agency, Inc. 8442 Alban Rd., Springfield, VA 22150 703 866-3111 703 866-2332Vernon Bitzer Associates, Inc. 980 Thomas Drive, Warminster, PA 18974 215 443-7500 215 443-7573WMS Sales, Inc. (Main office) 9580 County Rd., Clarence Center, NY 14032 716 741-9575 716 741-4810SouthEastBillingsley & Associates, Inc. 2728 Crestview Ave., Kenner, LA 70062-4829 504 602-8100 504 602-8106Billingsley & Associates, Inc. 478 Cheyenne Lane, Madison, MS 39110 601 856-7565 601 856-8390Francisco J. Ortiz & Co., Inc. Charlyn Industrial Pk., Road 190 KM1.9 - Lot #8, Carolina, Puerto Rico 00983 787 769-0085 787 750-5120Mid-America Marketing, Inc. 203 Industrial Drive, Birmingham, AL 35211 205 879-3469 205 870-5027Mid-America Marketing, Inc. 1364 Foster Avenue, Nashville, TN 37210 615 259-9944 615 259-5111Mid-America Marketing, Inc. 5466 Old Hwy. 78, Memphis, TN 38118 901 795-0045 901 795-0394Smith & Stevenson Co., Inc. 4935 Chastain Ave., Charlotte, NC 28217 704 525-3388 704 525-6749Harry Warren, Inc. 1400 North Orange Blossom Trail, Orlando, FL 32804 407 841-9237 407 841-9246Watts Georgia 2861-B Bankers Industrial Drive, Atlanta, GA 30360 770 209-3310 770 447-4583NorthCentralAspinall Associates, Inc. 6840 Hillsdale Court, Indianapolis, IN 46250 317 849-5757 317 845-7967Dave Watson Associates 1325 West Beecher, Adrian, MI 49221 517 263-8988 517 263-2328Disney McLane & Associates 428 McGregor Ave., Cincinnati, OH 45206 800 542-1682 877 476-1682BWA Company 17610 S. Waterloo Rd., Cleveland, OH 44119 216 486-1010 216 486-2860Mid-Continent Marketing Services Ltd. 1724 Armitage Ct., Addison, IL 60101 630 953-1211 630 953-1067Soderholm & Associates, Inc. 7150 143rd Ave. N.W., Anoka, MN 55303 763 427-9635 763 427-5665Stickler & Associates 333 North 121 St., Milwaukee, WI 53226 414 771-0400 414 771-3607SouthCentralWesternHugh M. Cunningham, Inc. 13755 Benchmark, Dallas, TX 75234 972 888-3808 972 888-3838Mack McClain & Associates 4407 Meramec Bottom, Suite G, St. Louis, MO 63129 314 894-8188 314 894-8388Mack McClain & Associates, Inc. 1450 NE 69th Place, Ste. 56 Ankeny, IA 50021 515 288-0184 515 288-5049Mack McClain & Associates, Inc. 15090 West 116th St., Olathe, KS 66062 913 339-6677 913 339-9518OK! Sales, Inc. 214-A NE 12th., Moore, OK 73160 405 794-5200 405 794-5250Phoenix Marketing, Ltd. 2416 Candelaria N.E., Albuquerque, NM 87107 505 883-7100 505 883-7101Delco Sales, Inc. 1930 Raymer Ave., Fullerton, CA 92833 714 888-2444 714 888-2448Delco Sales, Inc. 111 Sand Island Access Rd., Unit I-10, Honolulu, HI 96819 808 842-7900 808 842-9625Fanning & Associates, Inc. 6765 Franklin St., Denver, CO 80229-7111 303 289-4191 303 286-9069Hollabaugh Brothers & Associates 6915 South 194th St., Kent, WA 98032 253 867-5040 253 867-5055Hollabaugh Brothers & Associates 3028 S.E. 17th Ave., Portland, OR 97202 503 238-0313 503 235-2824P I R Sales, Inc. 3050 North San Marcos Place, Chandler, AZ 85225 480 892-6000 480 892-6096Preferred Sales 31177 Wiegman Road, Hayward, CA 94544 510 487-9755 510 476-1595R. E. Fitzpatrick Sales, Inc. 4109 West Nike Dr. (8250 South), West Jordan, UT 84088 801 282-0700 801 282-0600Canada0625Watts Industries (Canada) Inc.(Watts Regulator Co. Division) 5435 North Service Road, Burlington, Ontario L7L 5H7 905 332-4090 905 332-7068Con-Cur West Marketing, Inc. 71B Clipper Street, Coquitlam, British Columbia V3K 6X2 604 540-5088 604 540-5084D.C. Sales Corporation Inc. #10-6130 4th St. S.E., Calgary, Alberta T2H 2B6 403 253-6808 403 259-8331D.C. Sales Corporation Inc. 11420 142 Street, Edmonton, Alberta T5M 1V1 780 496-9495 780 496-9621GTA Sales Team. Greater Toronto Area 888 208-8927 888 479-2887Hydro-Mechanical Sales, Ltd. 3700 Joseph Howe Drive, Suite 1, Halifax, Nova Scotia B3L 4H7 902 443-2274 902 443-2275Hydro-Mechanical Sales, Ltd.P.O. Box 1445 (Mailing), 297 Collishaw St., Suite 7 (shipping)Moncton, New Brunswick E1C 9R2 506 859-1107 506 859-2424J.D.S. Sales Ltd. 4 Lancaster Street, St. John’s, Newfoundland A1A 5P7 709 579-5771 709 579-1558Le Groupe B.G.T., Inc. 23 du Buisson, Pont Rouge, Quebec G3H 1X9 418 873-2500 418 873-2505Le Groupe B.G.T., Inc. 86 des Enterprises #208, Boisbriand, Quebec J7G 2T3 450 434-9010 450 434-9848Mar-Win Agencies, Ltd. 1333 Clifton St., Winnipeg, Manitoba R3E 2V1 204 775-8194 204 786-8016Northern Mechanical Sales P.O. Box 280 (mailing) 163 Pine St. (shipping), Garson, Ontario P3L 1S6 705 693-2715 705 693-4394Palser Enterprises, Ltd. P.O. Box 28136 (mailing), 1885 Blue Heron Dr., #4,London, Ontario N6H 5L9 519 471-9382 519 471-1049RAM Mechanical Marketing Inc. 1401 St. John Street, Regina, Saskatchewan S4R 1S5 306 525-1986 306 525-0809RAM Mechanical Marketing Inc. 510 Ave M South, Saskatoon, Saskatchewan S7M 2K9 306 244-6622 306 244-0807Walmar Mechanical Sales 24 Gurdwara Rd., Nepean, Ontario K2E 8B5 613 225-9774 613 225-0673EXPORT Hdqtrs.: Watts Regulator Co. 815 Chestnut St., North Andover, MA 01845-6098 U.S.A. 978 688-1811 978 794-1848Water Safety & Flow Control ProductsUSA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.comCanada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.caF-BV 0631 © Watts Regulator Company, 2006