<strong>COXARTIS</strong>instrument set for arthroscopy of the hip by MiehlkeAn adapter allows the use of telescopeswith different angles of view during theoperation and the transfer of the cameraunder sterile conditions.Accessories for trocar sleeves and telescopesAdapter, autoclavable 8580.91Stopper 89101.0000Irrigation cannulaThe large-lumen, atraumatic irrigationchannel is used for the efficient aspirationof particles and foreign bodies fromthe hip joint and can be introducedin conjunction with a Ø 7 mm dilator(891532070).Irrigation cannulaIrrigation cannulaØ 8.0 mm, capacity 7.0 mm,WL 168 mm891737080Manual instrumentsSpecially shaped curettes with ergonomichandpieces for effective removaland smoothing of bone, remnants ofcartilage and calcium deposits.Manual instrumentsWCurette,squareWidth W = 4.5 mm,WL 170 mm, angled,distal tip curved upwards,one side sharpWidth W = 6.0 mm,WL 170 mm, angled,distal tip curved upwards,one side sharp891632245891632260ØCurette,roundCurette ring Ø 5.5 mm,WL 170 mm, angled,distal tip curved upwards,one side sharpCurette ring Ø 7.0 mm,WL 170 mm, angled,distal tip curved upwards,one side sharp891631255891631270Graduated microfractors with tips at avariety of angles for microfracture ofcartilage defects with ergonomic handpieces.MicrofractorWL 170 mm15° curved 89163152130° curved 89163302145° curved 89163452135° S-shaped 89163352260° curved 89163602160° S-shaped 89163602280° curved 8916380214
<strong>COXARTIS</strong>instrument set for arthroscopy of the hip by MiehlkeArthroscopyManual instrumentsManual instrumentsHHooked probeWL 150 mm, graduated in steps of2.5 mm, height H = 4.5 mm891534515Extended hooked probe, graduated forpalpation and measuring.Rasp for debriding and removing bone.Rasp, convexWL 175 mm, distal width 4.5 mm89160.3002Banana knifeWL 125 mm8436.251Banana knife for incision of the jointcapsulePunchesPunchesJaws curvedupwards891432102Sharp punches with adapted length andvarious degrees of bend and angleused to resect dense tendinous and ligamentousstructures.ARTHROlinepunchØ 4 mm,WL 180 mm,height of jaws1.6 mmcurved left, jawscurved upwardscurved right, jawscurved upwards891432101891432103standard, shaftcurved upwards8914321225