BACnet - iGuzzini

More documents

Recommendations

Info

Switch / blind actuators Dimmer 32 Master Pro Evo KNX protocol Switch actuator REG-K/8x230/16 with manual mode option and current detector MI21 For controlling eight electric loads independently. The actuator is fitted with a built-in current detector that can measure the load current on each channel. All the outputs can be commanded using manual switches. Colour 00 Switch actuator REG-K/12x230/16 with manual mode option and current detector MI22 For controlling twelve electric loads independently. The actuator is fitted with a built-in current detector that can measure the load current on each channel. All the outputs can be commanded using manual switches. Colour 00 Dimmer actuator REG-K/2x230/300W MI25 For controlling and adjusting incandescent lamps and electronic transformers. Colour 00 Universal dimmer actuator REG-K/2x230/1000W MI26 For controlling and adjusting incandescent lamps and HV and LV halogen lamps using bobbin wound transformers or electronic dimmer devices. Colour 00 REG-K/8x/16x/10 switch/blind actuator with manual mode option MI23 For controlling eight blind/shutter motors independently or for switching sixteen loads via closure contacts. The blind or switch channel function can be configured as required. All the blind/switch outputs can be commanded manually using the buttons on the front of the device. Colour 00 REG-K/4x24/6 blind actuator with manual mode option MI24 For controlling four blind/shutter motors independently. The blind channel function can be configured as required. All the blind outputs can be commanded manually using the buttons on the front of the device. Colour 00 0-10 V REG-K 3-pole control unit with manual mode option MI27 For connecting devices with a 0-10 V KNX systems interface. With an integrated bus coupler and life terminals (230 V) or life-connected terminals (0-10 V). Each individual 230 V switch output can be controlled manually with a switch. Colour 00
Display and control panels 7” touch panel MI33 The 7” touch panel is used to view and check the building's current functions and states. Colour 00 Internal framework set for 7” touch panel MI29 The set includes an internal support frame and USB cover. Colour 01 Aluminium frame for 7” touch panel MI30 Decorative aluminium frame for 7” touch panel. Colour 12 Frame for 7” touch panel MI31 Colour 01 Case for recessed mounting and assembly in a plasterboard wall for 7” IP touch panel MI32 Colour 00 33
Page 1: Light Management System Solutions f
Page 5 and 6: Energy efficiency The Kyoto protoco
Page 7 and 8: Active and passive energy 10% 20% 3
Page 9 and 10: Energy efficiency Recanati - Italy
Page 11: L.E.N.I. For each intended location
Page 14: 12 Building Automation Protocols KN
Page 18 and 19: 16 Conference halls Benefits Master
Page 20 and 21: 18 Showrooms Benefits Master Pro Ev
Page 22 and 23: 20 Offices Benefits Master Pro Evo
Page 24 and 25: 22 Polyfunctional centres Benefits
Page 26 and 27: 24 Schools and colleges Benefits Ma
Page 28 and 29: 26 KNX protocol Now used throughout
Page 30 and 31: Interfaces / Gateways Buttons / Con
Page 32 and 33: Movement / presence detectors Time
Page 36 and 37: 34 LON protocol Created in America
Page 38 and 39: DALI control unit DALI multisensors
Page 40 and 41: 38 LMS Quick 64 DALI addresses Open
Page 42 and 43: Headquarters iGuzzini illuminazione
Page 44 and 45: International distributors aUSTraLI
Page 46: Graphics Studio Conti Printing Arbe

BACnet - iGuzzini

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?