ls 2200 int base-h 001 - Idamer

Assembly kit for aluminium radiatorsComponents Variants Delivery unit Model descriptionHeat conductor Heat conductor 3/1 50 off F12130-2001/12 x toggles 50 off FZ253-1602 x cross head screw M3 x 25 500 off F12105-20762 x self tapping screw C 4,2 x 25 C 500 off F10102-2026(instead of toggle)Depending on the assembly variant either the 2 self tapping screws C 4.2 x 25 or two toggles with their M 3 x 25 screws are to be usedTechnical dataMeasuring principle:Single sensor or Dual sensorRange of use 1 ):Single sensor units t min,m = 55 °C, t max,m = 105 °CDual sensor units t min,m = 35 °C, t max,m = 105 °CStart of count:(t Z relates to the determined heating medium temperature)Single sensor unitst Z ≥ 30 °C (for t L = 20 °C) unratedt Z ≥ 28 °C (for t L = 20 °C) ratedDual sensor units t Z - t L ≤ 5 K1 ) Definitions to DIN EN 834t min,mt max,mt Zt Lt mLowest mean design heating medium temperature, for which the heating cost distributor may be used. For single pipeheating systems this is the mean design heating medium temperature of the last radiator in the runHighest mean design heating medium temperature, for which the heating cost distributor may be used.Mean heating medium temperature of the radiator at which the register of the heating cost distributor starts to runReference air temperatureMean heating medium temperatureDimensions (B x H x T):LifeDisplayWeightTransmission frequencyTransmission powerStorage temperature92,5 x 40 x 28 mm10 years plus 15 months reserveLCD, five character with special symbols120 g868 MHz< 1 mW-25° to +60°CBase-HL S 2200 INT • Page 4 / 6