Lee Lead Casting - Midsouth Shooters Supply

Reference ChartIMPORTANT: Dies listed under Groups A, B, C, D, E and F are Standard Dies. If the caliber of dies you require is not listed, please call for availability. RCBS® Shell Holder numbersdo not correspond to those of other manufacturers. When two Shell Holder numbers are listed, the most popular is shown first. It may be necessary to use the alternate,depending on the manufacturer and/or lot of cases being used. The numbers in ( ) in the table indicates the following: (1) Order Shell Holder by caliber. (2) Cases may be Berdanprimed. Depriming and priming must be done by hand. If cases were formed from cases having boxer-type primer, use the appropriate Shell Holder for the caliber. (4) Not available.(5) Auto 4x4 Shell Plate not available. (6) Auto 4x4 and Five-Station Shell Plates not available. (7) Use #14 for Lapua brass, #37 for Norma brass. The letter codes in thePlastic Ammo Box Size column indicate the following: SR = Small Rifle, MR = Medium Rifle, LR = Large Rifle, MP = Medium Pistol, LP = Large Pistol. * Used only with RotaryCase Trimmer and Rotary Case Trimmer-2.90