Lee Lead Casting - Midsouth Shooters Supply

ALee Lead CastingB C DPro 4-20(A) Large diameter high capacity pot, holds approximately 20 pounds oflead. A generous 4 inches of clearance under the spout accepts all brands of bulletmolds and most sinker molds. It also includes an adjustable mold guide to quickly andaccurately position any mold for pouring. Incorporates the famous Lee patented highefficiencydesign and dependable remote sensing thermostat, now in a dust tighthousing. Long life 700-watt tubular heating element assures quick melting and rapidrecovery. New micro adjustable, flow control valve adjusts instantly with a twist of thescrew driver. Front mounted low maintenance replaceable valve spout allows instantreseating with a turn of a screwdriver.Pro 4-20 Melter, 110 VoltPro 4-20 Melter 220 VoltOrder No.006-90947006-90948Price$63.0465.78Magnum Melter (B) Large 4" diameter pot allows easy access for the ladle caster.Same high efficiency design that has made Lee pots the most popular. Melt time isless than 20 minutes with just 700 watts. 20-lb capacity for the longest casting session.Order No. 006-90949 $48.64Prod. Pot IV (C) Four inches of clearance under the spout instead of the standardtwo inches. This is high enough to accept all brands of bullet moulds and most sinkermoulds. The large deep pot holds approximately 10 pounds of lead. Melt time is lessthan 20 minutes. Pour spout up front where it belongs so you can see what you'redoing. With a unique infinite highly reliable heat control that is mounted away from thehigh heat of the pot. Uses only 500 watts of power during heatup and a lot less tomaintain temperature. Thermal feedback to the infinite control permits the heater toput out full power until the metal has melted. 2 year warranty!!Prod. Pot IV 110 voltProd. Pot IV 220 voltOrder No.006-90009006-90008*Price$52.7655.50Precision Melter (D) High speed melter with an infinite heat control for the seriousshooter. Easily handles 4 cavity moulds. Takes less than 15 minutes to melt 4 poundsof metal. 500 watts, AC only. 2 year guarantee by Lee Precision. 110vOrder No. 006-90021 $31.51NRA Formula Alox® Beeswax Mix - Excellent forrifle and pistol bullets. The famous NRA formulareduces leading, increases accuracy, and permitshigher velocities. Contains 50% alox 2138F lubricantand 50% commercial A-1 beeswax.Order No. 006-90007 $5.29Ingot Mould - The Ingot Mould makes 1 pound and1/2 pound blocks, and comes with wooden handle.Order No. 006-90029 $9.86Lead Ladle - The Lead Ladle is a convenient sizeladle for bullet casting and comes with wooden handle.Order No. 006-90026 $3.51Six Cavity Mould Handle - Precision steel moldhandles fit not only the Lee Six Cavity blocks, butmost other brands of one and two cavity molds.Order No. 006-90005 $12.68*Press soldseparatelybelowLee Lube and Sizing Kits - The fastest and easiestway to lubricate and size cast bullets. Standard 7/8x14threads fit any reloading press. Bullets are pushedthrough the sizing die cone first so no special nosepunches are needed. Sized bullets are captured in thespecial container. $15.50Order No.006-90049006-90036006-90083006-90170006-90171006-90037006-90038006-90039006-90044006-90686006-90934006-90046.224 Kit.225 Kit.243 Kit.284 Kit.285 Kit.308 Kit.309 Kit.311 Kit.314 Kit.323 Kit.329 Kit.356 KitOrder No.006-90047006-90048006-90060006-90052006-90053006-90054006-90062006-90061006-90055006-90056006-90057.357 Kit.358 Kit.401 Kit.410 Kit.427 Kit.429 Kit.430 Kit.451 Kit.452 Kit.454 Kit.457 KitLiquid Alox® Lubricant - Lee Liquid Alox Lubegives better accuracy and less leading than conventionallylubricated and sized bullets. Comes in a4 ounce dispenser bottle. Easy and fast.Order No. 006-90177 $4.22Hardness Testing Kit - No more wasted components shootingtoo soft or too hard lead. Cast and load with confidenceknowing your alloy is up to the job. Quickly and preciselycheck hardness of your lead alloy. Exclusive conversionchart tells the maximum operating pressure of any lead alloy.Kit includes calibrated hardened steel ball indenter "v" blockcradle snaps into standard press ram 20 power 4 lens opticalmeasuring microscope.Order No. 006-90924 Price $49.36WARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.Lee Reloader Press - Great addition to your SizingStation, and an outstanding value! Exclusive balancedlever that can't drop down to pinch your fingers.Unlimited hand clearance that only "C" frame can offer.Works equally well with the right or left hand. Even ifyou already own a press, an exclusive press set up foronly bullet sizing is the way to go!Order No. 006-90045 $26.78Lead: Reducing ExposureLead contamination in the air, in dust, and on your skin is invisible. Keepchildren and pregnant women away during use and until cleanup is complete.Risk can be reduced—but not eliminated—with strong ventilation; washinghands immediately after use of these products before eating or smoking; andcareful cleaning of surfaces and floors with disposable wipes, after lead dusthas had a chance to settle. Use a lead-specific cleaner with EDTA, or a highphosphatedetergent (like most detergents sold for electric dishwashers), andbag wipes for disposal.Use Strong Ventilation!57

32/2032 S&W Long32 Colt NPWARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.32 Special - 38 S&W - 38 Colt New PoliceWorks great in 9mmLugerLEE MOULD PRICESMOULDPRICEDOUBLE CAVITY- $18.066-CAVITY- $36.15HOLLOW POINT $18.76All Lee Moulds come with handlesexcept 6 Cavity MouldsBallisticCoefficientDouble Cavity6 Cavity.125311-93-1R006-90300006-90308.174311-100-2R006-90301.100TL314-90-SWC006-90301.106358-105-SWC006-90316006-90315.116358-125-RF006-90574-.142358-140-SWC006-90318006-90317.072TL358-148-WC006-90279006-90294.072358-148-WC006-90312006-90380.131358-150-1R006-90328006-90326.117TL358-158-SWC006-90321006-90295.117C358-158-SWC006-90322006-90327.207TL358-158-2R006-90388006-90319.160358-158-RF006-90303006-906929mm Luger - 38 Super Auto - 380 Auto9mmMAKAROV40 S&W - 10mm 41 Magnum 44 Spec - 44 Mag- 44/40BallisticCoefficientDouble Cavity6 Cavity.105356-102-1R006-90305-.123356-120-TC006-90239006-90387.164TL356-124-2R006-90464006-90465.127TL356-124-TC006-90238006-90402.166356-125-2R006-90309006-90457.093365-95-1R006-90466-.117401-145-SWC006-90470-.141TL401-175-SWC006-90431006-90433.141401-175-TC006-90256006-90690.110410-195-SWC006-90330-.119TL410-210-SWC006-90335-.111429-214-SWC006-90336-.124C429-240-SWC006-90338006-90483.124429-200-RF006-90285006-9042844 Spec - 44 Mag - 44/4045 ACP - 45 Auto Rim - 45 ColtBallisticCoefficientDouble Cavity6 Cavity.196429-240-2R006-90341006-90339.169TL430-240-SWC006-90299006-90357.218C430-310-RF006-90858006-90227.090452-160-RF006-90570.127452-200-SWC006-90348006-90310.140452-200-RF006-90234006-90697.127TL452-200-SWC006-90463006-90379.145452-228-1R006-90351006-90352.189TL452-230-2R006-90346006-90350.146TL452-230-TC006-90287006-90286.146452-230-TC006-90290006-90289.136452-252-SWC006-90356-.210452-255-RF006-90358006-9034945 Colt454 Casull480 Ruger475 Linebaugh500 S&W7mm 30 Caliber Rifle 7.62x39BallisticCoefficientDouble Cavity6 Cavity.233C452-300-RF006-90359006-90228.256C476-325-RF006-90237.271C476-400-RF006-90241.296C501-440-RF006-90991.305C285-130-R006-90360.199C309-113-F006-90362.163C309-120-R006-90364.264C309-150-F006-90366.252C309-160-R006-90367.268C309-170-F006-90368.317C309-180-R006-90369.352C309-200-R006-90370.268 .276CTLC312-155-2R 312-160-2R006-90385 006-90361Bullet Design by C.E. Harris303 B 8mm 8x56 338Cal 375 Win 45-70 Caliber Rifle50-70 Cal38/55Hollow BaseBallistic.247CoefficientC312-185-1RDouble Cavity 006-90371Hollow Point/Base.216C324-175-1R006-90274.361C329-205-1R006-90775.250C338-220-1R006-90372.250379-250-RF006-90324.211457-340-F006-90373.225457-405-F006-90374.250459-405-HB006-90268.250457-450-F006-90375.278C457-500-F006-90376.443459-500-3R006-90577.220515-450-F006-90255.283515-500-F006-9026658

Lee Improved MouldTraditional DesignCast minie bullets as fast as round balls. These mouldshave the automatic core pin. Open the mould upsidedown to empty. Close it and you are ready to cast thenext. the core pin automatically centers in the mould.Easily cast 200 bullets per hour. A quality mould built tolast as long as your rifle. OS IS FOR OVERSIZED.45 Caliber .450-294M45 Caliber OS .454-298M50 Caliber .500-360M54 Caliber .533-410M54 Caliber OS .540-415M58 Caliber .575-472M58 Caliber OS .578-478MOrder No. Price006-90467 $18.76006-90469 18.76006-90472 18.76006-90473 18.76006-90474 18.76006-90476 18.76006-90478 18.76*REAL MEANS RIFLE ENGRAVED AT LOADING. Asolid bullet that loads easily even after many firings,because of its unique cleaning action. Will not tumble. Aperfect hunting bullet with heavy loads. Easy to cast.Shoots accurately even in greatly oversize barrels.ALSO AVAILABLE is the combo mould with a REAL bulletand one round ball as noted.Double Cavity REAL MouldsOrder No. Price45 Caliber 200 grain45 Caliber 250 grain50 Caliber 250 grain50 Caliber 320 grain54 Caliber 300 grain54 Caliber 380 grain58 Caliber 440 grain006-90390006-90392006-90394006-90396006-90398006-90400006-90404$18.0618.0618.0618.0618.0618.0618.06.440 dia. RB & 200 gr. Real.490 dia. RB & 320 gr. RealLee Minie Moulds58 Caliber .575-500MLee Modern MinieTarget DesignThe most accurate of all Minies. Makes nice,clean holes in the target. The first choice forhighest scores.50 Caliber .500-354M58 Caliber .575-470MCombo MouldsOrder No.006-90471006-90475Real Bullet Moulds forMuzzleloadersOrder No.006-90405006-90488Lee Shotgun Moulds1 oz. Shotgun Slug Mould7/8 oz. Shotgun Slug Mould18 Cavity 00 Buckshot Bullet Mold -New eighteen cavity 00 Buckshotmold. Precision-machined moldproduces 18 linked pellets per cast.No need to individually countpellets simply snip threestrands into your 12 gaugeshell. Each cast producesenough pellets to load two12 Gauge shotshells.Ball diameter .330.Order No. 006-90486 $43.10Order No.006-90481Single CavityOrder No.006-90281006-90282Price$18.76Price$18.7618.76Price$18.0618.06Price$18.7618.76Lee Conical BulletMould for Black PowderRevolversA super accurate bullet that is easy toload straight and true. The base ofthe bullet slips into the chamber whilethe next two lands guide and sealwith a perfect press fit. Two lubegrooves prevent flash ignition andlead fouling. More energy and fargreater accuracy than round balls.Lee Double CavityConical Bullet Moulds36 Cal .375-130-1R44 Cal Remington .450-200-1R44 Ruger Old Army .456-220-1RLee Bullet Mouldsfor Round BallsOrder No.006-90410*006-90415*006-90418006-90424006-90425*Order No.006-90406006-90420006-90436006-90438006-90440006-90442006-90444006-90448006-90450006-90456006-90283006-90460Order No.006-90378006-90382006-90384SINGLE CAVITY $18.06 (* $18.06).319.350.360.390.395DOUBLE CAVITY $18.06.311.375.440.445.451.454.457.490.495.535.530.562Order No.006-90452006-90454006-90461*006-90975*006-90978*Price$18.0618.0618.06.500.530.575.600.690WARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.Miscellaneous LeadCasting SuppliesMarvelux 1/2 LB Flux - Finestbullet casting flux available.Reduces dross formation.Increases alloy fluidity. Non-Corrosive - Non-Smoking.Order No.048-083030050 $6.54Universal Case Expanding Die-Gently flares the case mouth to acceptcast bullets without shaving. (Alsoworks great on Moly and Jacketed bulletsas well) Includes neck plugs for .22cal through .45 cal) Works on everythingfrom the 22 Hornet to the largestUltra MagOrder No. 006-90798 $11.27The SAECO Lead Hardnesss Tester -A precision instrument which accurately determines thehardness of a bullet casting alloy. The SAECO LeadHardnesss Tester pays for itself by allowing you to convertscrap lead into casting alloy.Order No. 076-42000 Price $139.67SAECO Mould HandlesDuctile iron castingswith hardwood grips.Fit all SAECO moulds1-8 cavity.Order No.076-29000 $38.26Frankford Arsenal Drop Out Mold ReleaseWhen applied sparingly, provides a thin dryfilm coating of micron-sized graphite. It's Easyto Apply, Fast Drying, and Long Lasting!Order No. 094-763758 Price $7.92Lyman Cast Bullet Handbook -The first new Cast BulletHandbook from Lyman in 30years! It will include data for allLyman Moulds, plus additionaldata for select RCBS, Reddingand Lee Moulds. Written by wellknowncast bullet authority, MikeVenturino.Order No.015-9817004 $18.00Hornady Crimp-OnGas ChecksPriced per 100022 Cal25 Cal6mm6.5mm Cal270 Cal7mm Cal30 Cal32 Cal338 Cal348 Cal35 Cal375 Cal416 Cal44 Cal45 Cal475/480 Cal50 CalOrder No. Price003-7010 $20.31003-7030 21.42003-7020 21.04003-7040 21.10003-7050 23.10003-7060 25.10003-7070 25.57003-7080 26.04003-7090 23.24003-7100 27.52003-7110 22.79003-7120 27.41003-7125 32.04003-7130 31.23003-7140 32.84003-7145 34.66003-7150 47.58BEFORE SIZINGON BULLETSAFTER SIZINGON BULLETS59

.30 .329mm.38/.357PistolBullet NumberWeight (#2 Alloy)Double Cavity Part #Top Punch NumberTop Punch Part #Four Cavity Part #31125275 gr.26602524652786742_31324985 gr.26602492262786703_35624290 gr.26612423112786710_356402120 gr.266040240227867232670402356242120 gr.26602423112786710_356637147 gr.266063763727867492670637358091150 gr.266009149527867692670091358477150 gr.266047742927867312670477358156155 gr.266015642927867312670156358665158 gr.266066549527867692670665.38/.357 40 S&W/10mm .38/40.44/40PistolBullet NumberWeight (#2 Alloy)Double Cavity Part #Top Punch NumberTop Punch Part #Four Cavity Part #358311160 gr.266031131127867102670311358429170 gr.266042942927867312670429358430195 gr.26604304302786732_401654150 gr.2660654432786691_401638175 gr.26606384327866912670638401043175 gr.2660043432786691_427666200 gr.266066664927867782670666427098205 gr.2660098432786691_500 S&W.44 & .44 mag.45 AutoPistolBullet NumberWeight (#2 Alloy)Double Cavity Part #Top Punch NumberTop Punch Part #Four Cavity Part #501680375 gr.2640680*6492786778_429215210 gr.266021542127867292670215429667240 gr.266066764927867782670667429421245 gr.266042142127867292670421429383245 gr.2512786704_429244255 gr.266024442127867292670244429650300 gr.26606504212786729_452460200 gr.266046046027867402670460452630200 gr.266063046027867402670630452374225 gr.266037437427867192670374*Single Cavity.45 Colt.454 dia..452 dia..45Devastator Hollow Point Moulds38 spec./9mm.44 .45Mould KeyIndicates single cavity.PistolUses 30Cal GasChecksIndicatesCowboyAction MouldsBullet NumberWeight (#2 Alloy)Double Cavity Part #Top Punch NumberTop Punch Part #Four Cavity Part #454190250 gr.26601901902786700_452664250 gr.266066464927867782670664452424255 gr.26604224242786730_452490255 gr.26604904242786730_452651325 gr.26606516492786778_356637125 gr.26506376372786749429640250 gr.26506406492786778452374180 gr.26503743742786719Bullets which shoulddo well on silhouettesand have wonmany matches.Round Ball Volume CastingTHESE SINGLE & DOUBLE CAVITY MOULDSREQUIRE DOUBLE CAVITY HANDLES!SINGLE CAVITY$54.43Order No.015-2645530015-2645535015-2645570015-2645600015-2645662015-2645690015-264571560Dia.530.535.570.600.662.690.715DOUBLE CAVITY$54.43Order No.015-2665375015-2665440015-2665445015-2665451015-2665454015-2665457015-2665490015-2665495Dia.375.440.445.451.454.457.490.495Slug and Sabot Slug Moulds12 Ga Slug 475 gr12 Ga Sabot Slug 525 gr20 Ga Sabot Slug 350 grOrder No.015-2654012015-2654112015-2654120Price$54.4354.4354.43WARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.Lyman Gas ChecksThese gilding metal caps fit thebullet case and protect it from thehot powder gases. Easily seatedduring bullet sizing, the gaschecks also permit higher velocities.Priced per 1000!!.22 Gas Checks.25 Gas Checks.264 Gas Checks.7mm Gas Checks.30 Gas Checks.32 Gas Checks.35 Gas Checks.44 Gas Checks.45 Gas ChecksOrder No. Price015-2827261 34.64015-2827263 34.64015-2827264 34.64015-2827266 36.08015-2827267 36.08015-2827268 36.08015-2827270 36.08015-2827272 46.92015-2827273 46.92

.22 .25 6.5mm 7mm .30M1/7.62x39mm.30RifleBullet NumberWeight (#2 Alloy)Mould #Top Punch NumberTop Punch Part #22543844 gr.2660438438278673322541555 gr.2660415415278672622564655 gr.2660646646278675925742065 gr.26604204202786728266469140 gr.26604694632786741266673150 gr.26606736412786753287346135 gr.26603463462786715287641160 gr.26606416412786753311359115 gr.26603593592786772311672160 gr.26606726442786758311291170 gr.26602914652786742311041173 gr.266004182786690Rifle.30 32/20 .314 dia 32/40 8mm .35 .375/.378/ .40.38-55.38-55 Cal..406dia..40Cal..410diaBullet NumberWeight (#2 Alloy)Mould #Top Punch NumberTop Punch Part #311332180 gr.26603324132786725311644190 gr.26606446442786758311299200 gr.26612994672786743311284210 gr.26602842842786707311008115 gr.266000882786690314299200 gr.26602994672786743319247165 gr.266024782786690323470165 gr.26604704702786745358315204 gr.26603153112786710375248249 gr.26602484492786736375449264 gr.26604494492786736378674335 gr.26406746632786779403169240 gr.2660169432786691410655400 gr.26406554492786736Rifle.40 Cal..410dia40 Cal.Snover.41043Span.43Mauser45 H.P.Postell.50Bullet Number 410660Weight (#2 Alloy) 385 gr.Mould # 2640660Top Punch Number 658Top Punch Part # 2786755410663400 gr.26406636632786779439186370 gr.26401862512786704446110340 gr.26401102512786704457191292 gr.26401911912786701457122330 gr.26501221912786701457124385 gr.26401243742786719457643400 gr.26406431912786701457193405 gr.26401931912786701457671475 gr.26406713742786719457658480 gr.26406586582786755457125500 gr.26401253742786719457132535 gr.26401321322786695515141425 gr.26401411412786696Plains BulletsMinie BallMaxi BallVolunteer.451Whitworth.45.50 .54 .54 .58 Old New ParkerBlue-Grey New 69Style Style HaleTarget Musket.45 .50Bullet #Wt.(Lead)Mould #Handles#451114450 gr.26411142735793457121PH475 gr.26411212735793508656395 gr.26546562735793548657450 gr.26546572735793542622425 gr.26546222735793575494315 gr.26544942735793575213-0S460 gr.26542132735793575213510 gr.26512132735793575213PH566 gr.26502132735793577611530 gr.26546112735793578675405 gr.2654675273579368569730 gr.26545692735793454616245 gr.26406162735793504617370 gr.26406172735793Lyman Mould PricesLyman moulds are still individually machined from highgrade steel. Blocks are hand fit for precision alignment.You Must Order Lyman Moulds & Handles Separately!!LYMAN MOULD PRICESWHEN ORDERING A LYMAN MOULD OR TOPPUNCH, PLEASE ADD THE PREFIX "015" TO THEPART NUMBERAll Single Cavity MouldsAll Double Cavity MouldsAll Four Cavity MouldsPrice$54.4354.4373.66Lyman Mould HandlesSolid metal frame is easily attached to blocks with slotted screws. Hardwood handles providea cool secure grip. Designed to provide uniform grip with different mould blocks.Lyman mould handles are offered in two sizes. Large, for all current two cavity moulds,current single cavity round ball moulds, and all current Minie and Maxi moulds. Four Cavity,for all Lyman four cavity moulds.Large Mould Handles4 Cavity Mould HandlesOrder No.015-2735793015-2735794Price$30.7930.79WARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.61

Lyman Casting AccessoriesLyman Master Casting KitComes with theNew 4500 Lubricator/Sizer!“Big Dipper”Electric CastingFurnace -New economicalelectric castingfurnace hasmore than10 lb. Capacity.Ingot Mould- Lyman's ingot mould is useful when meltingdown scrap lead or when blending alloys. Eachmould forms four easy-to-use ingots.Order No. 015-2837794 $17.17New! 10lbs Cast Iron Lead Pot - Now use any sourceto melt lead. With convenient pour spout and flat bottomto prevent spilling. Order No. 015-2867795 $12.87Casting Dipper - Now the dipper can be assembled forright or left handed casters. Dipper with cast iron head isshaped for easy, accurate pouring and prevents airpockets in the finished bullet.Order No. 015-2867790 $15.57Stainless Steel Thermometer- Measure a temperaturerange from 200°F to 1000°F and has a six inch stem foruse with even the deepest furnacesOrder No. 015-2867793 $33.66Gas Check Seater (for 450 Bullet Sizer Lubricators)Order No. 015-2745881 $7.17Complete Casting Kit - This is the perfect kit for thebeginner or expert reloader. Save over 20% by purchasingthis kit over individual prices. Comes with Mini-Mag10 pound furnace, the New 4500 Lube Sizer, lead dipper,ingot mould and Lyman's famous Cast BulletHandbook. All this for less than the cost of most furnaces.Order No. 015-2712000 $175.60WARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.Features fast heat-up time with thermostat control to+/- 10 degrees. Easy “on-off” temperature dial.Compact size with wide mouth for easy ladling.Heavy duty aluminum construction withstable non-tip design.Order No. 015-2800350 $32.22FOR ALL TECHNICAL ADVICE AND QUESTIONS PERTAINING TO DIES, MOULDS, RELOADERS, CASTERS,MUZZLELOADERS, FIT, GUARANTEE, ETC. ON LYMAN PRODUCTS, CALL LYMAN CUSTOMER SERVICE 1-800 22L-YMAN (800-225-9626)Lyman Furnaces and Heaters“Big Dipper” Casting Starter Kit - Features all theitems needed to get started in casting bullets economicallyand efficiently. Includes “Big Dipper” electriccasting furnace with 10+ lbs capacity, LymanCasting Dipper, Ingot Mold for storing excess lead,Super Moly Bullet Lube and the Lyman Reloadingand Cast Bullet Guide.Order No.015-2800375 $66.31ABA - The Lyman Mag Dipper - Designed for the ladle-caster only, the Magdipper has the full 20 lb. capacity, theproven heating system, body construction and wide, tip-resistant base of the Mag 20. Larger casting ladles haveeasy access to the 4 3/8" diameter pot. Order No. 015-2800061 $243.70B - The Lyman Mag 20 Furnace - Offers important new features, advantages and value for bullet casters. The large20 lb. steel crucible provides the capacity for all casting needs...from single cavity to multiple cavity moulds. It incorporatesthe proven Lyman bottom-pour valve system and unique mould guide for optimum convenience. Its set screwadjustability accommodates virtually all mould set-ups. Available in 110V.Order No. 015-2800067 $293.88C - LUBE SIZER HEATER - Attaches directly to your Lyman #450, RCBS, SAECO, or STAR lubricator-sizers.Designed for use with hard stick lubes! 110V Order No. 015-2745885 $44.45Lyman Bullet LubesOrange Magic- New high performance lube guarantees higher velocity with cast bulletswithout leading. Low smoke output. Requires use of heater.Order No. 015-2857286 $3.69Alox- Bullet lubricant improves accuracy and prevent barrel leading at higher velocities.Order No. 015-2857277 $3.69Super Moly - An all purpose, high temperature bullet lubricant. With MolydenumDisulfide added for increased velocity, it coats the barrel with a fine flim which improvesaccuracy and makes leading non-existent.It flows through lube sizers without heat andwon't melt at 130 degrees. Order No. 015-2857272 $3.69CLyman Cast BulletHandbook – The pioneerof reloading manuals –will introduce the 4thEdition of their popularCast Bullet handbook.This will be the first newCast Bullet Handbookfrom Lyman in 30 years!It will include data for all Lyman Moulds, plus additionaldata for select RCBS, Redding and LeeMoulds. Written by well-known cast bullet authority,Mike Venturino, this will be the most up-to-date andcomprehensive cast bullet data available.Order No. 015-9817004 $18.00Casting Dipper -Now the dipper can be assembled for right or lefthanded casters. Dipper with cast iron head is shapedfor easy, accurate pouring and prevents air pocketsin the finished bullet.Order No. 015-2867790 $15.57New! 10lbs Cast Iron LeadPot - Now use any source tomelt lead. With convenientpour spout and flat bottom toprevent spilling.Order No.015-2867795 $12.8762

4500 Sizer/LubricatorLyman's New 4500 Lubricator/Sizer simultaneouslysizes and lubricates cast bulletsto the desired diameter. Features a solidone piece bottom - ideal for use with hardlubricants. A larger ball knob for moreleverage for sizing and lubricating thelargest bullets. Easy adjustments for sizedepth and lube flow. Purchase desired H&Isize die and top punches listed below.Available with or without lubricator heater.Note: 4500 Lube heater not adaptable tomodel 450 Lube/Sizer.Includes Moly bullet lube & Gas CheckSeater.4500 Lube Sizer4500 with 110v Heater4500 110v Heating ElementTop PunchesOrder No.015-2745880015-2745892015-2745896The inside contour of each top punch isprecisely machined to fit bullet nose shapeexactly. This eliminates most deformationwhen the top punch forces abullet down into the sizing die.$7.59 eachOrder No.015-2786690015-2786691015-2786754015-2786695015-2786696015-2786700015-2786701015-2786748015-2786703015-2786704015-2786707015-2786709015-2786710015-2786715015-2786772015-2786719015-2786723015-2786725015-2786726015-2786728Order No.015-2766462015-2766463015-2766542015-2766465015-2766460015-2766466015-2766467015-2766543015-2766470015-2766551015-2766471015-2766552015-2766473015-2766476015-2766477015-2766478015-2766479015-2766528015-2766480015-2766553015-2766485015-2766486015-2766487015-2766488015-2766534015-2766490015-2766491015-2766492015-2766493Punch/Cal.#8#43#93#132#141#190#191#203#226#251#284#303#311#346#359#374#402#413#415#420Order No.015-2786729015-2786730015-2786731015-2786732015-2786733015-2786736015-2786740015-2786741015-2786742015-2786743015-2786745015-2786769015-2786749015-2786753015-2786758015-2786759015-2786778015-2786755015-2786779015-2786781015-2786785H&I Sizer Dies $20.41 eachSize byDiameter.224.225.243.244.251.257.258.264.266.277.278.284.285.308.309.310.311.312.313.314.321.323.325.338.354.355.356.357.358Order No.015-2766494015-2766495015-2766559015-2766497015-2766527015-2766524015-2766498015-2766501015-2766502015-2766504015-2766548015-2766550015-2766505015-2766508015-2766537015-2766509015-2766510015-2766511015-2766541015-2766513015-2766514015-2766515015-2766516015-2766517015-2766519015-2766535015-2766530015-2766520015-2766521Price$143.34154.1330.07Punch/Cal.#421#424#429#430#438#449#460#463#465#467#470#495#637#641#644#646#649#658#663#677#678Size byDiameter.359.360.363.375.377.378.379.400.401.406.408.409.410.427.428.429.430.431.439.446.450.451.452.454.457.458.459.509.512Pro-Melt Furnace Lube-A-Matic 2Bullet Sizer-LubricatorPro-Melt Furnace(110v)Pro-Melt Furnace(220v)RCBS CastingAccessoriesThe heavy duty Pro-Meltfurnace features an 800watt heating element.110V and a snap action,industrial quality thermostat.For added accuracyand responsiveness, thethermostat is coupled to aremote sensor on the bottomsurface of the pot.Can be set up for eitherleft or right hand operation.Capacity is 22pounds. UL listed.Order No.044-81100044-81200Price$350.09360.94Lead Dipper- has a large capacity bowl, tapered pouringspout and a hardwood grip.Order No. 044-80015 Price $21.77Lead Pot- made of heavy duty cast iron, will hold up to10 pounds of molten metal.Order No. 044-80010 Price $17.81Mould Ingot- mould up to 4 ingots at once and coolthem quickly with the handy ingot mould.Order No. 044-80005 Price $17.81Lead Thermometer - With a 1000 F range and plus orminus 1% accuracy. Pour lead at the optimum temperature!Large numbers printed on 1 1/2" glass coveredface with a 6" probe. Great for use with any melting pot!Comes with an adjustable 6" handle (prevents burning offingers). Order No. 044-81175 $44.29Mould Mallet - RCBS® has reintroduced the woodenmould mallet to tap out your cast lead bullets withoiutharming your moulds. Order No. 044-80007 $9.67WARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.Size and lubricate cast bullets in onestep. Just insert a bullet in the sizer dieand pull the handle. You must ordersizer dies and top punches separately.Also great for seating gas checks!*See the mould page for sizer diesand top punches.Lube-A-Matic 2 SizerDust CoverRCBS Bullet LubesPistol Bullet Lube(stick)Rifle Bullet Lube (stick)Order No.044-80040044-86880Order No.044-80008044-80009Alternate Bullet Cast Bullet SizersRCBS Bullet Casting Video - An age-oldart explained with modern technology.This comprehensive video isauthoritative, informative, andentertaining to watch. Step-by-stepinstructions on cast bullet preparationand moulding, plus completeinformation for most RCBS mouldsmuzzle velocities, powder chargesand more. Order No. 044-99907 $18.67Price$157.398.64Price$4.394.39*All other Sizer Dies are listed on the Bullet mouldpages beneath the appropriate mould.Caliber Size Sizer Die Part No. Price22 .224” .224” dia. 044-822006mm .243” .243” dia. 044-822016mm .244” .244” dia. 044-8220225 .257” .257” dia. 044-82203270 .277” .277” dia. 044-822057mm .284” .284” dia. 044-8220830 .308” .308” dia. 044-8221130 .310” .310” dia. 044-8221330 .311” .311” dia. 044-8221432 .312” .312” dia. 044-8224232 .313” .313” dia. 044-8221532 .314” .314” dia. 044-8221638/357 .354” .354” dia. 044-8221938/357 .355” .355” dia. 044-8222038 .356” .356” dia. 044-82221357 .357” .357” dia. 044-82222357/38-55 .375” .375” dia. 044-8222444-40 .427” .427” dia. 044-8222744 .429” .429” dia. 044-8222844 .431” .431” dia. 044-8223045 .450” .450” dia. 044-8223145 .451” .451” dia. 044-8223245 Colt .454” .452” dia. 044-8223345 .457” .457” dia. 044-8223545 .458” .458” dia. 044-8223650 .501” .501” dia. 044-82250$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17$24.17Hornady Dial-Caliper & MicrometerDial Caliper- Make precise measurements to .001. Measure case length, bullet diameter, inside/outside diameters,primer pocket depth. Stainless steel, locks down, comes in case. Order No. 005-050075 $26.09Micrometer- Measures bullet and case diameters to .001. Locks down on measurement and has adjustable “0”.Comes in a wooden presentation case. Order No. 005-050071 $20.7063

SilhouetteRifleCALIBER.7mmSILHOUETTE308 CALIBERSILHOUETTE308SILHOUETTE357SILHOUETTE.44S/.44MSILHOUETTESIZE: .285+MOULD: MOULD #7mm-145-SIL.309+MOULD #308-165-SIL.309+MOULD #308-200-SIL.358+MOULD #357-180-SIL.430+MOULD #429-240-SILCALIBERSIZE:22 CALIBER.225+6mm.24425 CAL..258270.2787mm.28530.30930.309+MOULDORDER #:ORDER#044-82150ORDER#044-82152ORDER#044-82153ORDER#044-82154ORDER#044-82156MOULD:MOULD #22-055-SPMOULD #243-095-SPMOULD #257-120-SPMOULD #270-150-SPMOULD #7mm-168-SPMOULD #30-115-SPMOULD #30-150-FNSIZERDIE:.285 dia.044-82209.309 dia.044-82212.309 dia.044-82212.358 dia.044-82223.430 dia.044-82229MOULDORDER #:ORDER#044-82007ORDER#044-82015ORDER#044-82016ORDER#044-82017ORDER#044-82018ORDER#044-82009ORDER#044-82019TOPPUNCH:SEATERPLUG:#531044-855317MM SIL044-9696$5.30#541044-85541308 SIL044-9697$5.30#541044-85541308 SIL044-9697$5.30#430044-82530357 SIL044-90019$4.89#422044-8252644 SIL044-90031$5.30SIZERDIE:TOPPUNCH.225 dia.044-82240#506044-85506.244 dia.044-82202#509044-85509.258 dia.044-82204#515044-85515.278 dia.044-82206#529044-85529.285 dia.044-82209#531044-85531.309 dia.044-82212#535044-85535.309 dia.044-82212#546044-85546RifleCALIBERSIZE:.30 CALIBER.309+.30 CALIBER.309+.7.62mm.309310 CADET.31032.321.35 CALIBER.358+375, 38-55.376+.38-55.37840.41040Single Cav..41040Single Cav..41040Single Cav..408416Single Cav..417MOULD:MOULD #30-180-SPMOULD #30-180-FNMOULD #7.62-130-SPLMOULD #310-120-RNMOULD #32-170-FNMOULD #35-200-FNMOULD #37-250-FNMOULD #378-312 BPSMOULD #40-300-SP-CSAMOULD #40-350-SP-CSAMOULD #40-400-SP-CSAMOULD #40-400-BPSMOULD #416-350-FNMOULDORDER #:ORDER#044-82020ORDER#044-82014ORDER#044-82022ORDER#044-82023ORDER#044-82024ORDER#044-82028ORDER#044-82029ORDER#044-82090ORDER#044-82070ORDER#044-82072ORDER#044-82074ORDER#044-82086ORDER#044-82075SIZERDIE:.309 dia.044-82212.309 dia.044-82212.309 dia.044-82212.310 dia.044-82213.321 dia.044-82217.358 dia.044-82223.376 dia.044-82225.378 dia.044-82252.410 dia.044-82226.410 dia.044-82226.410 dia.044-82226.410 dia.044-82226.417 dia.044-82246TOPPUNCH#541044-85541#546044-85546#554044-85554#550044-85550#565044-85565#570044-85570#608044-85608#378044-82520#378044-82520#378044-82520#609044-85609#562044-85562RifleRifle & Silhouette Mould PricesRifle Bullet Moulds Double CavityRifle Bullet Moulds Single CavitySilhouette Rifle & Pistol Moulds Double CavityTop PunchSizer DiesOrder No.Mould Order#Mould Order#Mould Order#Top Punch #Sizer Die #Price$69.8169.8169.817.9924.17CALIBERSIZE:MOULD:MOULDORDER #:SIZERDIE:TOPPUNCH44-40.428MOULD #44-200-FNORDER#044-82036.428 dia.044-82244#595044-8559511MM.446MOULD #44-370-FNORDER#044-82093.446 dia.044-82253#585044-8558545 CALIBER.458+MOULD #45-300-FNORDER#044-82051.458 dia.044-82236#600044-8560045 CALIBER.458+MOULD #45-325-FN-UORDER#044-82045.458 dia.044-82236#383044-8558345 CALIBERSingle Cav..458+MOULD #45-405-FNORDER#044-82053.458 dia.044-82236#600044-8560045 CALIBERSingle Cav..458+MOULD #45-500-FNORDER#044-82054.458 dia.044-82236#600044-8560045 CALIBERSingle Cav..458+MOULD #45-500-BPSORDER#044-82085.458 dia.044-82236#607044-85607Abbreviation GuideTG: TargetSPL: SpecialU: UniversalPT: PointedCAV: CavalryCN: Conical NoseFN: Flat NoseRN: Round NoseSWC: Semi-WadcutterWC: WadcutterSP: Semi-PointBB: Bevel BaseM: Minie BallR: Round NoseSIL: SihouetteDE: Double EndINDICATES GAS CHECKBULLETWARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.Round BallMini BallNorth/South Skirmish MouldsDIAMETER MOULD MOULD ORDER #Price$81.22ADJUSTABLEDIAMETER MOULD MOULD ORDER #.500.520.540.500 Hodgdon.520 Hodgdon.540 Hodgdon044-82166044-82170044-82172Price$84.63.435.440.451.457.490#435-R#440-R#451-R#457-R#490-R044-82134044-82135044-82138044-82140044-82142Price$67.13DIAMETERMOULD:MOULDORDER #:.575Single Cav.58-500-MORDER#044-82103.576.578.580.584DIAMETER MOULD MOULD ORDER #.576 Hodgdon.578 Hodgdon.580 Hodgdon.584 Hodgdon044-82160044-82161044-82162044-82164Price$84.6364

PistolCALIBER88804323232389MM9MM9MM9MM9MM38/35738/35738/35738/357SIZE:.311.311.314.356.356.356.356.356.356.358.358.358.358MOULD:MOULD #32-077-RNMOULD #32-098-WCMOULD #32-098-SWCMOULD #38-090-RNMOULD #09-115-RNMOULD #9mm-124-RNMOULD #09-124-RN-TGMOULD #09-124-CNMOULD #9MM-147-FMMOULD #38-148-WCMOULD #38-150-SWCMOULD #38-158-RNMOULD #38-158-SWCMOULDORDER #:ORDER#044-82021ORDER#044-82060ORDER#044-82061ORDER#044-82057ORDER#044-82026ORDER#044-82062ORDER#044-82063ORDER#044-82027ORDER#044-82077ORDER#044-82031ORDER#044-82032ORDER#044-82064ORDER#044-82065SIZERDIE:.314 dia.044-82214.314 dia.044-82216.314 dia.044-82216.356 dia.044-82221.356 dia.044-82221.356 dia.044-82221.356 dia.044-82221.356 dia.044-82221.356 dia.044-82221.358 dia.044-82223.358 dia.044-82223.358 dia.044-82223.358 dia.044-82223TOPPUNCH#465044-82536#445044-82543#444044-82542#311044-82513#115044-82504#401044-82521#115044-82504#402044-82522#556044-85556#429044-82529#429044-82529#311044-82513#429044-82529PistolCALIBER40/10MM10MM10MM41444444444445 AUTO45 AUTO.45 AUTOSIZE:.401.400.400.410.430.430.430.430.430.452.452.452MOULD:MOULD #40-180-FNMOULD # MOULD #10MM-170-SWC 10MM-200-SWCMOULD #41-210-SWCMOULD #44-225-SWCMOULD #44-240-SWCMOULD #44-245-SWCMOULD #44-250-KMOULD #44-300-SWCMOULD #45-185-SWC-BBMOULD #45-200-SWCMOULD #45-201-SWCMOULDORDER #:ORDER#044-82066ORDER#044-82067ORDER#044-82068ORDER#044-82039ORDER#044-82041ORDER#044-82042ORDER#044-82043ORDER#044-82080ORDER#044-82079ORDER#044-82052ORDER#044-82046ORDER#044-82047SIZERDIE:.401 dia.044-82245.400 dia.044-82243.400 dia.044-82243.410 dia.044-82226.430 dia.044-82229.430 dia.044-82229.430 dia.044-82229.430 dia.044-82229.430 dia.044-82229.452 dia.044-82233.452 dia.044-82233.452 dia.044-82233TOPPUNCH#558044-85558#518044-85518#518044-85518#420044-82541#421044-82527#421044-82527#421044-82527#421044-82527#421044-82527#680044-82545#460044-82534#680044-82545PistolCALIBER.45.45 AUTO.45 COLT.45 COLT.45 COLT.45.50 AEPistol Mould PricesPistol Bullet Moulds Double CavityTop PunchSizer DiesOrder No.Mould Order#Top Punch #Sizer Die #Price$67.137.9924.17SIZE:MOULD:MOULDORDER #:SIZERDIE:TOPPUNCH.454MOULD #45-225-CAVORDER#044-82081.454 dia.044-82234#552044-85552.452MOULD #45-230-RNORDER#044-82048.452 dia.044-82233#374044-82519.454MOULD #45-250-FNORDER#044-82049.454 dia.044-82234#190044-82506.454MOULD #45-255-SWCORDER#044-82050.454 dia.044-82234#424044-82528.454MOULD #45-270-SAAORDER#044-82092.454 dia.044-82234#424044-82528.452MOULD #45-300-SWCORDER#044-82083.454 dia.044-82233#424044-82528.500MOULD #50-340-SWCORDER#044-82087.500 dia.044-82254#611044-85611Abbreviation GuideTG: TargetSPL: SpecialU: UniversalPT: PointedCAV: CavalryCN: Conical NoseFN: Flat NoseRN: Round NoseSWC: Semi-WadcutterWC: WadcutterSP: Semi-PointBB: Bevel BaseM: Minie BallR: Round NoseSIL: SihouetteDE: Double EndINDICATES GAS CHECKBULLETCowboyActionRCBS Bullet Mould Handles - Solid steel frames with extra-long, premiumhardwood handles for comfort. Perfect for home bullet casting.One size fits all RCBS bullet moulds. Order No. 044-80025 $34.49CALIBERSIZE:25-20 WIN..25830-30 WIN.30932H&R MAG.32-20WIN.31438 SPEC357 MAG.35838 SPEC357 MAG.35838-40 WCF.40144-40 WCF44 Russian44 SPEC44MAG.428-.43045 S&W Sch45 Long Colt.452-.454MOULD:MOULD #25-85-CMMOULD #30-150-CMMOULD #32-90-CMMOULD #38-140-CMMOULD #38-158-CMMOULD #40-180-CMMOULD #44-200-CMMOULD #45-230-CMMOULDORDER #:PRICE:SIZERDIE:TOPPUNCHORDER#044-82301$73.13.258 dia.044-82204#630044-85630ORDER#044-82302$73.13.309 dia.044-82212#631044-85631ORDER#044-82303$70.36.314 dia.044-82216#632044-85632ORDER#044-82304$70.36.358 dia.044-82223#633044-85633ORDER#044-82305$70.36.358 dia.044-82223#633044-85633ORDER#044-82306$70.36.401 dia.044-82245#635044-85635ORDER#044-82307$70.36.428 dia.044-82244#636044-85636ORDER#044-82308$70.36.452 dia.044-82233#637044-85637WARNINGTHE USE OF CASTING PRODUCTS WILL EXPOSE YOU TOLEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE BIRTH DEFECTS AND CANCER. AVOID INHALINGTHE FUMES FROM MOLTEN LEAD. EXHAUST VENTILATIONTO THE OUTSIDE AIR SHOULD BE PROVIDED WHENEVERTHIS PRODUCT IS USED. WASH HANDS AFTER EXPOSUREAND BEFORE EATING, DRINKING OR SMOKING.65

SingleStage600 JR SIZEMASTER 650PLEASE NOTE: We cannot make substitutions on the powder bushings, they comefactory packed as advertised.Super Sizer12 Gauge Die Set16 Gauge Die Set20 Gauge Die Set28 Gauge Die Set410 Gauge Die SetThe SIZEMASTER SINGLE STAGE SPECTACULAR, complete with auto primer feed!Also comes with 1 shot bar and dies for the gauge ordered. Order charge bars and powderbushings from accessory page. Adjustable for 3" shells. Handles brass or steel heads,both high or low base. Returns shells to factory specs. The Dust Cover made of heavycanvas duck material protects your investment! Dust and dirt can cause problems!The 650 COMPLETE WITH AUTO PRIMER FEED. 650's are equipped with one bar andno powder bushings. Order extra charge bars and bushing from accessories page.Complete with dies for gauge ordered. No extra dies are available for the 650.Die Sets Fit 600 JR’sAfter 198312 Ga. w/1 1/8 oz. bar20 Ga. w/ 7/8 oz. bar8567 Grabber. The 12 gauge is equipped with powder bushings: 29, 30 & 33. Also included is one 1 1/8 ounce shot bar. The20 gauge is equipped with powder bushings: 20, 22 & 24. Also included is one 7/8 ounce shot bar. Specially designed withyou in mind. Now available: MEC Dust Cover made of heavy duty canvas duck material to protect your investment.12 Ga. w/ 1 1/8 oz. bar20 Ga. w/ 7/8 oz. barDust CoverDust CoverSold SeparateSingleStageSuper Sizer Available in 12 or 20 gauge only.Resizes shotshells perfectly with each pull of thehandle! Stop the guess work with a Super Sizer!Helps you work faster so you can shoot sooner!LEAD SHOT CHARGE BARS $12.41EA1/2 oz.5/8 oz.11/16 oz.3/4 oz.7/8 oz.1 oz.1 1/8 oz.1 3/16 oz.1 1/4 oz.1 3/8 oz.1 1/2 oz.1 5/8 oz.1 3/4 oz.1 7/8 oz.2 oz.2 1/4oz.SingleStage059-30212059-30258059-3021116059-30234059-30278059-302100059-302118059-3021316059-302114059-302138059-302112059-302158059-302134059-302178059-302200059-302214Progressive059-50212059-50258059-5021116059-50234059-50278059-502100059-502118059-5021316059-502114059-502138059-502112059-502158059-502134059-502178--STEEL SHOT CHARGE BARS7/8 oz. #1- #47/8 oz. #5- #61 oz. #BB- #21 oz. #3- #61 1/8oz #BB-#31 1/8oz #4-#61 1/4oz #3-#61 1/4oz #BB-#21 3/8oz #BB-#21 3/8oz #3-#61 1/2oz #BB-#21 1/2oz #3-#66612 Ga. w/1 1/8 oz. bar20 Ga. w/ 7/8 oz. barDust CoverSingle Stage059-30207814059-30207856059-302100BB2059-30210036059-302118BB3059-30211846059-30211436059-302114BB2059-302138BB2059-30213836059-302112BB2059-30211236$15.80EAProgressive059-50207814059-50207856059-502100BB2059-50210036059-502118BB3059-50211846059-502114BB2-059-50211436---Order No.059-9000GN12059-9000GN20059-8807ProgressiveOrder No.059-8567N12059-8567N20059-8807Price$493.99493.9922.02Order No.059-811912 12 Ga059-811920 20 GaPrice$370.08370.0822.02Order No.059-845212059-845216059-845220059-845228059-8452410Price$84.99Price$66.4466.4466.4466.4466.44Model D/DS fits MEC 650 and Grabbers. Model C/CSfits MEC 600 Jr. Mark 5, 600 Jr., 700 Versamec,Sizemaster 77, MEC 600, 400, 250, and 250 SuperReloaders, and the Texan LT.FREE POWDER BAFFLEWITH EVERY UNIVERSALCHARGE BAR!Model C/CSModel D/DSThe MEC 600 Jr. Mark V is the most popular shotshell reloader. Adjustable for 3" shells.Get a perfect shell every time with a Mark V. Die sets available for all gauges!! Order extrabushings and bars separately.Works withsteel and lead shot!Order No.087-CCS087-DDS10 Ga. w/2 oz. bar12 Ga. w/ 1 1/8 oz. bar16 Ga. w/1 oz. bar20 Ga. w/7/8 oz. bar28 Ga. w/3.4 oz. bar410 Ga. w/1/2 oz. bar12 Ga. w/1 1/8 oz. bar20 Ga. w/7/8 oz. barDust CoverThe 9000GN consists of powder and shot measure, large powder container, magnum shotcontainer, and reloading press has automatic indexing and finished shell ejection!! Requiresonly minimal adjustment from low to high brass domestic shells. The most automatic pressin the industry!!! The 12 gauge is equipped with powder bushings: 29, 30 & 33. Also includedis one 1 1/8 ounce shot bar. The 20 gauge is equipped with powder bushings: 20, 22 &24. Also included is one 7/8 ounce shot bar. The Dust Cover made of heavy canvas duckmaterial protects your investment!Multi-Scale Charge BarsPrice$40.5340.53Powder Baffle - Use with MEC ShotshellLoaders! Install between powder bottle andcharge bar for even powder density and consistentcharges. Order No. 087-PBIB $12.83Powder BushingsThe Bushing selection chart ismuch too large for our catalog.Please visit:www.mecreloaders.comto view the selection chart. AllBushings: $2.81 ea.059-5007 07059-5008 08059-5009 09059-5010 10059-5011 11059-5012 12059-5012A 12A059-5013 13059-5014 14059-5015 15059-5016 16059-5017 17059-5018 18059-5019 1910 Ga.12 Ga.16 Ga.20 Ga.28 Ga.410 Ga.Progressive059-5020059-5021059-5022059-5023059-5024059-5025059-5026059-5027059-5028059-5029059-5030059-5031059-5032059-5033Order No.059-844710059-844712059-844716059-844720059-844728059-8447410Order No.059-812012059-812020059-8807Order No.059-650N12059-650N20Progressive8567 Grabber 9000G2021222324252627282930313233Wad Fingers059-5034059-5035059-5036059-5037059-5038059-5039059-5040059-5041059-5042059-5043059-5044059-5045059-5046Pre 1983 Post 1983Order No.059-453P10059-453P12059-453P16059-453P20059-453P28059-453P410Price$1.581.581.581.581.581.58Order No.059-830010059-830012059-830016059-830020--Price$169.99155.99169.99155.99169.99169.99Price$223.99223.9922.02Price$290.99290.9934353637383940414243444546Price$1.531.531.531.53

Accessories for MEC ProductsStd Bottle & Cap AssemblyLg Bottle (Magnum Container)Bottle Support- ProgressiveBottle Support- SingleStage12 Gauge EZ Pak Assembly20 Gauge EZ Pak Assembly12 Gauge EZ Pak Assembly20 Gauge EZ Pak AssemblyEZ Prime V Auto Primer for 12 Ga. 600 JrEZ Prime V Auto Primer for 20 Ga. 600 JrEz Prime S Auto Primer for 650 (all gauges)Larger capacity progressive primer feed tray12ga 3.5” Conversion Kit (600Jr, 600JrMark5)Primer CatcherOrder No. Price059-301L13X $5.52059-8042 7.55059-8938 22.62059-8939 22.62059-15CA12 10.27059-15CA20 10.27059-15CA28 10.27059-15CA410 10.27059-285CA12 40.57059-285CA20 40.57059-385CA 44.45059-8983 58.29059-8774 74.63059-8067 2.21Lee Load All II Shotshell ReloaderLoad shotgun shells to look and shoot like new!The Load-All II includes a built in spent primer catcher withan easy to empty door right up front: recesses at every diestation for speedy shell positioning: easy and economicalgauge conversion. A lifetime reloader that loads faster thanmachines costing over $200.00. Included free of charge are24 shot and powder bushings with the safety charge bar.Loads 2 3/4" or 3" shells. Available in 12, 16 or 20 gauge. Wealso stock the primer feed for the Load-All II.12 Ga. Load-All II20 Ga. Load-All IIPrimer Feed/Load-All IIOrder No.006-90011006-90012006-90069Price$47.9647.969.15Part No.044-89111 #354044-89112 #360044-89113 #366044-89114 #372044-89115 #381044-89116 #390044-89117 #396044-89118 #402RCBS The Grand Shotshell ReloaderFor Field Loads #6’sCompensates for lighterpacking of smaller shot sizePart No.044-89170 7/8oz #6044-89171 1oz #6044-89172 1 1/8oz #6044-89173 1 1/4oz #6044-89174 1 3/8oz #6044-89175 1 1/2oz #6The Grand Powder Bushings044-89119 #408044-89120 #414044-89121 #420044-89122 #423044-89123 #426044-89124 #429044-89125 #432044-89126 #435044-89127 #438Lifetime Warranty!The Grand Lead Shot Bushings $5.21ea044-89001 THE GRAND, 12 Ga.Shotshell Press $760.09044-89014 THE MINI GRAND 12 Ga.Shotshell Press 125.39044-89015 THE MINI GRAND 20 Ga.Shotshell Press 125.39044-89010 The Grand, Riser Stand 24.62044-86885 The Grand, Dust Cover 21.51044-89128 #441044-89129 #444044-89130 #447044-89131 #450044-89132 #453044-89133 #456044-89134 #459044-89135 #462044-89136 #465For Target Loads Calibratedto measure max. legal loadsfor trap & skeet shootingPart No.044-89188 7/8oz #9044-89189 1oz #7 1/2044-89190 1oz #8044-89191 1 1/8oz #7 1/2044-89192 1 1/8oz #8044-89193 1 1/8oz #8 1/2044-89194 1 1/8oz #9044-89137 #468044-89138 #471044-89139 #474044-89140 #480044-89141 #486044-89142 #498Price$5.2112ga 1 Pc12ga 1 Pc (1oz)12ga 1 Pc (1 1/4oz)20ga 1 Pc (7/8oz)Wad HoppersMTM Shell & Wad Hopper(Holds 300hulls/500wads)Order No.008-WH01 $8.31Federal Replacement WadsOrder No.129-12S3129-12S0129-12S4129-20S1250 per bagPrice$6.336.336.336.33Powder Charge Weight in GrainsGRAINSAccurate Arms Nitro 100DuPont 700-XDuPont PBDuPont SR 7625DuPont -800-XDuPont SR 4756DuPont MR4227American SelectHercules Red DotHercules Green DotHercules UniqueHercules HercoHercules Blue DotHodgdon ClaysHodgdon IntlHodgdon UniversalHodgdon HS-6Hodgdon HS-7Scot 1000Solo 1250Winchester 540Winchester 571Winchester Super TgtWinchester Super LtWinchester Super Fld14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43366 402390354372366423381390354414390390438420381429402366420429402381402423453435441414447432441390414432468447414366456423390456420444453426402423408447480456414426372468435402468432429354456465435414429456468423438381480444438372468447426438426468498480435450390456 468 480450381486456438447435366444462396354459390498465444459447453471408447 459 471420 429 438 447 456 468471402474453468459465 474414 423480486462480471390498366Claybusters Replacement Wads474 486480408 414 420 426 435 441 447 453 462 468 474 480 486498435441 447 459 468 474480381390402396408402414408420381402 408 414390 396420 426 432 441 450 456 462423 429429 435 441 447 453 459 465 471423423429429435438441444444450450456459 465462 468498471474 480 486A B C D E F G H I J K L M N O P Q RA- 12 Gauge. Works with Winchester AA and other Winchester compression formedhulls with loads such as 17-18 grains red dot and 1 1/8 oz. shot for target and light fieldloads. Order No. 072-CB011812 Price $7.14B- 12 Gauge. Works with Winchester AA and other compression formed cases withmost trap, skeet, and light field loads with 1 1/8 oz. shot.Order No. 072-CB111812SV Price $7.91C- 12 Gauge pink 1 oz. wad for light loads in Winchester AA and other Winchester compressionformed hulls. Order No. 072-CB110012 Price $7.91D- 12 Gauge for Remington and Winchester tapered hulls. Loading data included inbag. Order No. 072-CB311812A Price $7.91E- 12 Gauge for straight hulls such as Federal and Fiocchi. Loading data included inbag. Order No. 072-CB311812AR Price $7.91F- Works with most 1 1/8 target and light field loads in Federal Gold Medal hulls and insome cases with federal Field Hulls. Check the Lyman Shotshell Handbook for properloads. Order No. 072-CB211812 Price $8.54G- 12 Gauge 1 oz. white wad for most light field and target loads in most Federal hulls.Order No. 072-CB210012 Price $8.54H- 20 Gauge white 7/8 oz. wad for most target and light field loads in AA and otherWinchester compression formed hulls. Order No. 072-CB107820 Price $7.91I- 28 Gauge 3/4 oz. wad used for 3/4 oz. target & light field loads in Winchester AA hullsand other compressed formed hulls. Order No. 072-CB103428 Price $7.91J- 410 Gauge for use in Winchester, Remington or Federal Hulls. Optimum load is1/2oz. Order No. 072-CB5050410HS Price $8.54K- 12 gauge gray 7/8oz. wad for light loads in Winchester AA and Remington hulls.Order No. 072-CB017812 Price $7.91L- 12 gauge red 1 3/8 heavy target or field loads in Winchester AA and other Winchestercompression formed hulls. Order No. 072-CB113812 Price $7.91M- 12 gauge yellow 1 1/4 heavy target or field loads. Winchester AA and otherWinchester compression formed hulls. Order No. 072-CB111412 Price $7.91N & O - Windjammer Improved! Powder cup vented & sized to reduce the possibility ofbuckling when reloading. Two design changes. Shot petals are not tied like the original,& our shot petals are flared for easier loading & better petal integrity.072-CB411812 12 Gauge (N) $7.14072-CB410012 12 Gauge 7/8 oz.(O) 7.91P - 072-CB503428HS - WAA28HS Win 28ga AA Heavy Shot Wads $8.54Q - 072-CB810012 - TGT12 7/8oz to 1 1/8oz Rem/Win Skeet $8.54R - 072-CB811812 - FIG8 1 1/8oz to 1 1/4oz Rem/Win Skeet $8.5467

Hornady Lock-N-Load Presses & AccessoriesLock-N-Load Auto Progressive- The Lock-N-Load AP press with itsinnovative Lock-N-load bushing system combines precision engineeringwith an innovative design. The result is the easiest, ready to use reloadingpress you can buy. Now with a simple flick of the wrist, you canchange dies and start loading another caliber in mere seconds. DOESNOT INCLUDE a Shell Plate! Includes Deluxe Powder Measure, andCase Activated Powder Drop. Order No. 005-095100 $431.12500 FREE BULLETS with the purchase of TheLock-N-Load Auto Progressive Press!L-N-L Case Feeder - This features a 110v motor andXL case bowl. Handles 4x the amount of cases thatother feeders do. Fits your Auto-Pro Press!Order No. 005-095300 $319.51Case Feeder Plate SM PistolCase Feeder Plate LG PistolCase Feeder Plate SM RifleCase Feeder Plate LG RifleL-N-L Die Bushing 3 packL-N-L Die Bushing 2 packL-N-L Press ConversionL-N-L Die Bushing 10 packOrder No.005-095310005-095312005-095314005-095316005-044093005-044094005-044095005-044096Price$27.2127.2127.2127.2113.419.409.0839.69Lock-N-Load Classic Kit - Includes: Lock-N-Load Classic loader, L-N-Lpowder Measure, Powder Scale, Universal Reloading Block, PrimerTurning Plate, Chamfering-DeburringTool, 3 L-N-L Die Bushings, OneShot Case Lube and the New 7th Edition Hornady Handbook.Now the Lock-N-Load Classic Kit includes the HornadyHandheld Priming Tool! Order No. 005-085003 $327.65500 FREE BULLETS with the purchase ofThe Lock-N-Load Classic Kit!Lock-N-Load Classic Package- Includes a Lock-N-LoadClassic loader and 3 Lock-N-Load Die Bushings.Order No. 005-085001 $125.31Automatic Primer Feed - Includes both large and small primer tubes.priming is 100% hands off. Order No. 005-070905 $26.05Powder Cop - Install on your progressive press after the powder drop station toautomatically check dropped charges. Works with all powder types and calibers.Order No. 005-050063 $28.33Get Loaded! Look for the FREE BULLETS logo! Hornady is giving away FREE BULLETS with the purchase of select items! Redemption of FreeBullets is from Hornady and bullets will be shipped from Hornady Manufacturing in Grand Island, Nebraska. (Shipping and Handling Fees apply) Offeris good from January 1st, 2011 through December 31st, 2011. Submission must be received by 2/15/12. Allow 10-12 weeks for delivery. Redemptionforms are available at www.hornady.comHornady Lock-N-Load® AutoCharge - Speed and efficiency savetime and money. Hornady’s new Lock-N-Load Auto Charge, has combinedboth in one extremely accuratesystem. Quick to setup, easy to use,and exceptionally precise to within 0.1grains, and has a scale capacity of1000 grains.Easy-to-use keypad, large easy-toreadbacklit display, automatic& manual dispense options,trickle function, three speedsettings, overchargeprotection, and easyclean out.Order No.005-050068 $218.82100 FREE BULLETSHornady Digital Reloading Scale -1500 grain Electronic Scale.Includes: Aluminum measure pan,100gr calibration weight.Powered by two AAAbatteries (included) andis compact (Only 5" x 3")Order No. 005-050107 $26.65Powder Trickler (Shown above) - Perfect for those lastfew tenths! Order No 005-050100 $10.15Powder Funnel - Anti-Static for .22-45 calOrder No. 005-586050 Price $2.74.17 Cal Adapter (Shown On Funnel)Order No. 005-586055 Price $7.07The Lock-N-Load Powder Measure - Offering probably the most flexibleoperation and the widest range of any measure on the market today.Not only can you switch powders and settings with a single button push,but add the proper accessories and the Lock-N-Load Powder Measurelets you meter charges from .5 to 265 grains of powder! Mount to yourbench using standard 7/8"-14 thread, use the Fast Load PowderMeasure Stand or mount on the Lock-N-Load AP for automatic powdermeasuring during reloading. Order No. 005-050069 $64.32100 FREE BULLETSFast Load Powder Measure Stand -The incredibly strong Fast-LoadPowder Measure Stand has a rigidframe and extra long arm that letsyou fill an entire 50-count UniversalLoading Block. Accepts any measurewith 7/8"-14 thread.Order No. 005-050008 $28.26Universal Loading Block- This double side blockhelps you load quantities of nearly anycaliber you choose. Fits magnum,308 and 223 size case heads. Alsoworks with Fast-Load Powder MeasureStand to reach every case in the block.Order No. 005-480040 $5.75Powder Measure Mounting Kit -Order No. 005-050121 $4.56Powder Measure Metering Inserts - Switch thesemetering units in and out of your Lock-N-Load PowderMeasure with just a push of a button.L-N-L Bushing Adapter KitRifle Micrometer Metering InsertStandard Metering Unit - 1 includedwith Lock-N-Load measureGo from reloading 30-06 to45 Auto in no time. Justpush the Lock-N-Loadinsert release button andinsert another meter.Order No.005-050122005-050124005-050120Price$11.5125.287.62Drain Tube Insert - Swaps with metering inserts so youcan drain powder without removing the measure from itsstand. Order No. 005-050125 $9.89Pistol Rotor and Standard Metering Insert - For use inyour L-N-L Powder Measure, this pistol rotor features asmaller chamber for more precise metering.Order No. 005-050128 $28.07Micrometer Pistol Insert - For extremely precise measurements,allows you to dispense one grain at a time.Order No. 005-050129 $25.16A - Case Activated Powder Drop - Improved & smooth! The powder drop only dispensesa powder charge when a case is present. Works with the Lock-N-Load AP orother progressive presses that use 7/8" x 14 threads. Order No. 005-050073 $50.06B - Quick Change Powder Die - Designed specifically for use with the Case Activated Powder Drop. Makes changingover your LNL-AP faster and easier than ever! It allows you to preset dies for fast caliber conversion on the market.Includes lower bracket with guide bushing and lock ring. Order No. 005-050074 $20.7068

Hornady New Dimension DiesLock-N-Load Die and ConversionBushings - Simply thread a HornadyLock-N-Load Conversion bushinginto your RCBS® Rock Chucker orother reloading press using a 1¼-12thread, and you’re ready to start usingthe Lock-N-Load System.L-N-L Press ConversionL-N-L Die Bushing 3 packL-N-L Die Bushing 2 packL-N-L Die Bushing 10 packShell Holder Kit! Best Value! Includes the#1, #2, #5, #16 & #35 shell holders.Order No. 005-390540 $14.5412345678101214161922Shellholders - Fits all Hornady andmost other single-stage presses. Seedie list for size.50 BMG 005-390585 $25.95 eachAll Other shellholders $3.64 eachOrder No.005-390541005-390542005-390543005-390544005-390545005-390546005-390547005-390548005-390550005-390552005-390554005-390556005-390559005-390562Order No.005-044095005-044093005-044094005-0440962627282930323536404244(.500)44(.338)46Shell Plates - Fits HornadyProgressive and Lock-N-Load.Sizes correspond to same size asHornady shell holders. See die listfor size. $29.59 eachOrder No.1 005-3926012 005-392602 273 005-392603 284 005-392604 295 005-392605 306 005-392606 327 005-392607 358 005-392608 3610 005-392610 4214 005-392614 4416 005-392616 4522 005-392622 46Sure-Lock® Lock Rings - For all standard7/8"-14 dies & accessories. Clamps aroundthe whole die without damage to the threads.Order No.Sure Lock Ring 1ea 005-044000 $2.93Sure Lock Ring 6ea 005-044606 14.82Price$9.0813.419.4039.69Order No.005-390566005-390567005-390568005-390569005-390570005-390572005-390575005-390576005-390580005-390582005-390584005-390583005-390602Order No005-392627005-392628005-392629005-392630005-392632005-392635005-392636005-392642005-392644005-392645005-39264650 BMG 2 Die Set - Guaranteed never tobreak or wear out from normal use.Order No. 005-544460 $234.3850 BMG Shell HolderOrder No. 005-390585 $25.9550 BMG Lock RingOrder No. 005-393341 $13.96New & Improved Zip Spindle-Custom Grade Dies new spindledesign guarantees to neverbreak under normal wear. Lightthreads strengthen the spindle,stop spindle slippage and makeadjustments a breeze.100 FREE BULLETS with the purchase of anyNew Dimension Dies with Zip SpindleSystem.Series I, II, or III with Order No. 005-546____Series II Handgun Dies - Set Includes Full Length SizeDie, Expander Die & Seating Die $42.63 set32S&W Long / Short (SH#36)9mm Luger / 9x21 (SH#8)380 Auto (SH#16)38 Super Auto (SH#8)38/357/357 Max (SH#6)9x18 Makarov (SH#8)10mmAuto / 40S&W (SH#10)41 Mag / 41 AE (SH#29)44 Spl. / 44 Mag (SH#30)45 ACP / Win Mag (SH#1)45 LongColt (SH#32)9x18 Mak (SH#8)Microjust Seating Stem - Turn your HornadyNew dimension dies into the ultimatebenchrest precision seaters with the all steelHornady Microjust seater stem on your NewDimension seater die. It features a micrometer-styleadjustment which can calibrate seatingdepths in 1/1000th of an inch incrementsfor ultra fine-tuning your loads. One size fitsall New Dimension Dies.Order No. 005-044090 $20.19Neck Size Dies - Eliminate problems of excessive headspace, and align the bullet perfectly with the bore.$22.50 each20 Cal (204 Ruger)22 Cal Nk Die22 Cal PPC22 Cal220 Swift6mm PPC6mm6mm Short257 Cal2706.5mm Short6.5mm7mm7mm Short30 Cal308 Short35 Cal270 Cal Mag (.277)7mm Mag (.284)30 Cal Mag (.307)338 Cal Mag (.307)Order No.005-546509005-546515005-546518005-546524005-546527005-546512005-546533005-546539005-546548005-546554005-546582005-546512Custom Grade Pistol 4 Die Rifle Set - Full-lengthSizing Die, Seating Die Roll Crimp, Adj. Case MouthExpander Die, Crimp Die. $65.44 set500 S&W (SH#44)475 LB / 480 Ruger (SH#14)460 S&W (SH#46)454 Casull (SH#32)Order No.005-546585005-546547005-546583005-546584Order No.005-046038005-046066005-046053005-046040005-046054005-046052005-046041005-046047005-046042005-046051005-046048005-046043005-046044005-046049005-046045005-046050005-046046005-046055005-046056005-046057005-046058Series I Rifle Dies - Set Includes Full Length Size Die &Seating Die $33.50 set17 Remington Fireball (SH#16)204 Ruger (SH#16)22 Hornet (SH#3)222 Rem (SH#16)22/250 (SH#1)220 Swift (SH#4)223 Rem (SH#16)223 WSSM (SH#16)243 Win (SH#1)243 WSSM (SH#1)244/6mm (SH#1)25/06 (SH#1)270 Win (SH#1)270 WSM (SH#35)6.5x55 (SH#19)7x57 Mauser (SH#1)7mm Exp/280 (SH#1)7mm08 (SH#1)7mm Rem Mag (SH#5)7mm WSM (SH#35)30/30 Win (SH#2)300 Wby (SH#5)308 Win (SH#1)308 Marlin Exp(SH#27)30/06 (SH#1)300 Win Mag (SH#5)8mm Mauser(8x57) (SH#1)338 WinMag (SH#5)338 Ruger Compact Mag (SH#5)300Rem Ultra Mag (SH#5)300Rem SA Ultra (SH#5)300 WSM (SH#35)300 Ruger Compact Mag (SH#5)270 Win Short Mag (SH#35)270 Win (SH#1)375 H&H Mag (SH#5)375 Ruger (SH#5)30M1 Carbine (SH#22)444 Marlin (SH#27)45-70 Govt (SH#14)450 Marlin (SH#5)458 Win Mag (SH#5)458 Lott (SH#5)405 Win (SH #42)17 Rem (SH#16)25 WSSM (SH#35)257 Roberts (SH#1)260 Rem (SH#1)264 Win Mag (SH#5)6.8mm Rem (SH#12)7mm WBY Mag (SH#5)7mm Rem SA Ultra (SH#5)7mm Rem Ultra Mag (SH#5)338 Rem Ultra Mag (SH#5)6mm PPC (SH#6)221 Rem (SH#16)35 Remington (SH#26)375 Remington Ultra Mag (SH#5)Order No.005-546117005-546201005-546212005-546224005-546220005-546222005-546228005-546223005-546244005-546225005-546246005-546262005-546300005-546297005-546282005-546308005-546320005-546316005-546326005-546327005-546342005-546350005-546358005-546357005-546340005-546352005-546382005-546390005-546399005-546365005-546347005-546369005-546353005-546297005-546300005-546416005-546415Series II Rifle Dies - Set Includes Full Length Size Die,Expander Die & Seating Die $37.73 setOrder No.005-546503005-546551005-546566005-546553005-546569005-546465005-546425Series III Rifle Dies - Set Includes Full Length Size Die& Seating Die $40.14 set218 Bee22/250 Ackley Imp (SH#1 )280 Ackley Imp (SH#1 )30/30 Ackley Imp (SH# 2)30/06 Ackley Imp (SH#1 )5.7x28 FNOrder No.005-546200005-546263005-546274005-546269005-546278005-546299005-546330005-546309005-546307005-546389005-546254005-546210005-546398005-546450Series IV Specialty Rifle Die Sets - Set Includes FullLength Size Die & Seating Die $65.44 setOrder No.005-546206005-546219005-546321005-546345005-546341005-54620369

Hornady Reloading AccessoriesLock-N-Load Power Case Prep Center -• Micro adjustable to 1/1000"• Trim cases from 3/4" to 3 1/4"in length• Vertical design of the powertrimmer and horizontaldesign of the tools keepsshavings from falling intocases, and makes casedischarge easy• Power Chamfer/Deburr Toolcleans inner case diameter• Power Deburr Tool cleansouter case diameter• Large and small PrimerPocket Cleaners• Optional Flash Hole DeburrTool (purchase separately)• Optional Primer PocketReamer (purchase separately)• Comes with five popularneck brush sizesCombining essential case prep tools into one handy unitsaves reloaders real estate on their bench and valuabletime in the reloading process. The new Lock-N-LoadCase Prep Center includes a power trimmer,chamfer/deburr tools, primer pocket cleaner and fiveneck brushes. A primer pocket uniformer, primer pocketreamers, and flash hole deburr tool can be purchasedseparately. Order No. 005-050012 $355.24M2 Tumbler- Dirty brass can ruin your dies! Hornadycase tumblers clean and polish to a brilliant finish beforeyou reload. M2 model holds up to 500 38Special cases,Brass Bushing Motor. Order No. 005-050200 $63.91One Shot Tumbler Media (2 lbs) - Media cleans andpolishes cases. Use with One Shot® Metal Polish. 1/4gallon tub. Order No. 005-050300 Price $7.40One Shot Non-Haz 8oz Metal Polish- For use withHornady’s Tumbling Media, this water-based, biodegradablepolish cleans, polishes and protects all metalsexcept aluminum. Order No. 005-9993 $7.51Case Care Kit- IncludesCase Size lube, Acc. Handle,Chamfer-deburr tool, Primerpocket heads, Case lube pad& tray, case neck brushes.Order No. 005-043300$24.08100 FREE BULLETSA- Cam Lock Trimmer- Based on the the design of theoriginal Hornady, the new Cam-Lock Trimmer lets youchange settings from longer to shorter in increments of1/1000”. Large dia.cutting head cuts up to .50 cal in dia.Includes pilots: 22 cal, 6mm, 270cal 7mm, 30cal, 38cal,45cal. Order No. 005-050140 $69.08Pilots are $3.12ea (*$ 4.89)Order No. Pilot005-390940 22 .204005-390943 1 .224005-390944 2 .228005-390945 3 .243005-390946 4 .257005-390947 5 .264005-390948 6 .277005-390949 7 .284005-390950 8 .300005-390951 9 .308005-390952 10 .312005-390953 11 .323Power Adaptor forCamlock Trimmer-Order No. 005-050145 $23.03Order No. Pilot005-390954 12 .333005-390955 13 .338005-390956 14 .348005-390957 15 .358005-390962 20 .361005-390958 16 .375005-390941 21 .400005-390959 17 .410005-390960 18 .429005-390961 19 .452005-390939* 23 .475005-390937* 50 .500HornadyLock-N-Load®Sonic CleanerHornady® Manufacturing has taken cartridge casecleaning to the next level with the new Lock-N-Load Sonic Cleaner. A combination of intenseultrasonic cleaning action and a unique cleaningsolution, One Shot® Sonic Clean, provide anextremely effective and efficient method to removecarbon residue and other foreign materials from theentire case. Unlike tumblers, this sonic cleanerquickly cleans the inside of the case as well asprimer pockets. The ultrasonic action creates microjetsthat blast carbon buildup off cases, small gunparts and equipment. The Lock-N-Load SonicCleaner can hold up to two hundred 223 Remcases or one hundred 308 Win cases.Order No. 005-043350 $97.49Hornady Lock-N-Load Sonic CleanerSolution - One quart of Lock-N-Load SonicCleaner Solution for 65 Sonic washes.Order No. 005-043355 $18.18Cam-Lock Bullet Puller -The fastest, easiest way yet to pull bulletswith your press. Just clamp down and the bullet is out.Uses standard collets (sold separately below)Order No. 005-050095 Price $20.45Collets are $7.95eaOrder No. Mandrel005-392154 1 .172005-392155 2 .224005-392156 3 .243005-392157 4 .260005-392158 5 .277005-392159 6 .284005-392160 7 .30870Order No. Mandrel005-392161 8 .322005-392162 9 .358005-392163 10 .375005-392164 11 .410005-392165 12 .430005-392166 13 .454005-392167 14 .204Primer Pocket Cleaner & Handle-Large- 005-041200 $5.16Small- 005-041201 $5.16Primer Pocket Reamer - Primer Pocket ReamerPackage makes GI Brass reloadable by cutting away theprimer pocket crimp. Complete with handle, large heador small head. $8.48 eachPrimer Pocket Reamer LargePrimer Pocket Reamer SmallChamfer/Deburr Tool - Prepares newcases for reloading by chamferingthe inside edge and deburringthe outside edge.Order No. 005-050017 $14.54Order No.005-041202005-041203One Shot Non-Haz 8oz Case Lube - This water-basedlube evenly distributes lubricant without any greasymess. It will not contaminate powder or primers and itwill not attack plastic, paint and other finishes.Order No. 005-9992 $7.51One Shot Cleaner & Dry Lube 5.5oz - One Shot GunCleaner & Dry Lube reduces friction, cleans grit, grime,old oil and gunk from firearms, loaders and loadingtools. It leaves behind a thin, dry lube that’s imperviousto heat, cold or buildup. Order No. 005-9990 $6.59One Shot Case Lube 5.5oz -Order No. 005-9991 $6.59Unique Case Lube 8oz - This all-natural lube is easyto use—a quick swipe as you pick up cases and it’sdone. Order No. 005-393299 $3.02New! One Shot Case Sizing Wax - Simply dab on yourindex finger and thumb, then apply to your cartridgecase before sizing. A little goes a long way.Order No. 005-9989 $7.51Neck turning tool -Hornady’s case neckturning tool is a greatcutter, at a greatprice. It is adjustablein 1/1000” incrementsto trim the outsideof the case neck for absolute uniformity.Mandrels sold separate below.Order No. 005-041222 Price $49.95Mandrels are $7.90eaOrder No. Mandrel005-391908 17 .172005-391909 204 .204005-391910 224 .2210005-391913 243 .2395005-391915 257 .257005-391919 264 .2615005-391921 270 .275Handheld Priming Tool - Now withmodified design that makes it easierto change over and the seater punchand spring are captured inside thebody; allowing shell holders andprimer trays to be changed withoutremoving them. Primers automaticallyflow from the primerholder to the feeding systemwhile the tool is being used.Order No. 005-0500021 $34.28Pistol Powder Bushings - Price $4.49Order No. Bushing005-290006 1005-290007 2005-290008 3005-290009 4005-290010 5005-290011 6005-290012 7005-290013 8005-290014 9005-290015 10005-290016 11Order No. Mandrel005-391924 7mm .2813005-391928 308 .3055005-391929 8mm005-391930 338005-391931 35005-391932 375Order No. Bushing005-290017 12005-290018 13005-290019 14005-290020 15005-290021 16005-290022 17005-290023 18005-290024 19005-290025 20005-290026 21005-290027 22

Two Gauge models fit all action types (except Winchester. 94).Lock-N-Load O.A.L. Gauges - Small changes in the clearance between the bullet andthe rifling can make a big difference in accuracy. Most often, seating bullets close tothe rifling will produce improved accuracy. FINALLY!!! - Here is the solution to properbullet seating depth for precision handloaders. The O.A.L. (over-all-length) Gauge producesan accurate model of your chamber with the bullet in light contact with the landsof the rifling. The result is then measured with your caliper, allowing easy transfer ofthis critical dimension to the bullet seating die. This allows you to precisely regulate thebullet's clearance (free-travel) to the lands: typically .020 to .040" for hunting rounds.The O.A.L. Gauge works with any bullet you choose. Eliminates guess work. Monitorsthroat erosion. No other method "measures up" to the reliability and precision of thiseasy to use tool. Modified case (required, see below) permits Gauge use with anychamber.C-1000 Bolt Action, Single Shot, StraightC-1550 Autoloader, Lever, Pump Action, CurvedA Series Modified Cases -Order No. Price17 Rem.005-A17 $4.27218 Bee005-A218 4.27221 Fireball 005-A221 4.27222 Rem. 005-A222 4.27222 Rem Mag 005-A222M 4.27223 Rem. 005-A223 4.2722-250 Rem. 005-A22250 4.27220 Swift 005-A220 4.27243 Win.005-A243 4.276mm Rem. 005-A6MM 4.276mm BR005-A6MMB 4.27257 Roberts 005-A257 4.27250 Sav005-A250 4.2725/06 Rem. 005-A2506 4.27260 Rem 005-A260 4.27264 Win Mag 005-A264 4.27270 Win.005-A270 4.277x57 Mauser 005-A7X57 4.277mm/08 Rem. 005-A7MM08 4.27280 Rem. 005-A280 4.27284 Win005-A284 4.2730 TC005-A30TC 4.277mm BR005-A7MM 4.277mm Rem. Mag. 005-A7MMR 4.2730/30 Win. 005-A3030 4.2730/40 Krag 005-A3040 4.27308 Win.005-A308 4.27308 Marlin Exp 005-A308ME 4.2730/06 Spfd 005-A3006 4.27300 H&H 005-A300H 4.27300 Win. Mag. 005-A300M 4.27300 Wby. Mag 005-A300W 4.27303 British 005-A303 4.277.62x39 (308) 005-A762 4.278mm Rem. Mag. 005-A8MM 4.278x57mm005-A8X57 4.27338 Win. Mag. 005-A338 4.27340 Wby Mag 005-A340 4.2735 Whelen 005-A35 4.2735 Rem005-A35R 4.27350 Rem Mag 005-A350 4.27375 H&H 005-A375 4.27416 Rem. Mag. 005-A416 4.27450 Bushmaster 005-A450B 4.2745/70 Gov't. 005-A4570 4.27Order No.005-C1000005-C1550Price$29.9934.29Interchangeable Modified Cases-Threaded case-head allowing them toattach to either O. A. L. Gauge model.Case necks are enlarged to allow bulletsto slide in neck area. Use same bullet asintended for reloading. Cases listed areto SAAMI specs. Wildcats and additionalModified Case models are available fromStoney Point.B Series Modified Cases -204 Ruger223 WSM243 WSSM6.55x55 Mauser6.5x284270 Wby Mag270 WSM240 Wby Mag257 Wby Mag7mm Rem SMag7mm Wby. Mag.7mm STW7mm Ultra Mag7mm WSM300 WSM Rem300 Ultra300 Rem SA338 Ultra Mag378 Wby MagOrder No. Price005-B204 $5.10005-B223 5.10005-B243 5.10005-B65X55 5.10005-B65 5.10005-B270 5.10005-B270W 5.10005-B240 5.10005-B257 5.10005-B7MMR 5.10005-B7MMW 5.10005-B7MMS 5.10005-B7MM 5.10005-B7WS 5.10005-B300W 5.10005-B300 5.10005-B300R 5.10005-B338 5.10005-B378 5.10C Series Modified Cases -Order No. Price30/378 Wby 005-C30378 $5.59375 Ruger 005-C375R 5.59458 Win 005-C458W 5.59416 Rigby 005-C416R 5.59450 Nitro Exp 005-C450NE 5.59Hornady Lock-N-Load Precision GaugesLock-N-Load Bullet Comparator Set w/6 Inserts- Measuring cartridge lengthsacross the bullet tips can cause variations from one round to the next. A BulletComparator allows your caliper to measure off the bullet's ogive to eliminate the variation.Also check bullet uniformity. The Lock-N-Load Comparator attaches to the bladeof your caliper with a thumbscrew and uses interchangeable "inserts" available for 17to 45 caliber. Includes the comparator body and 6 insert bushings (22, 24, 25, 27, 28,30 cal).Comparator Set w/6 Inserts Order No. 005-B234 $25.73Comparator Body Order No. 005-B2000 $11.99Additional inserts (below)$3.01ea#1 - 17 Cal. Insert#2 - 22 Cal. Insert#3 - 24 Cal. Insert#4 - 25 Cal. Insert#5 - 26 Cal. Insert#6 - 27 Cal. Insert#7 - 28 Cal. Insert#8 - 30 Cal. Insert#9 - 33 Cal. Insert#10 - 35 Cal. Insert#11 - 37 Cal. Insert#12 - 45 Cal. Insert#13 - 41 Cal. Insert#14 - 20 Cal. InsertOrder No.005-117005-222005-324005-425005-526005-627005-728005-830005-933005-1035005-1137005-1245005-1341005-1420Cartridge Headspace Gauge - Check cartridge headspace with your caliper? You bet!This affordable gauge system eliminates the need for special "mics" for each cartridgeyou load. It allows you to check variations between fire-formed brass from your chamberand your resized or new brass. Works with or without bullets seated. Preciselymeasures brass from case-head to datum line on shoulder. Allows you to resize yourbrass for a proper fit with your chamber. Maximizes brass life and improves accuracy.FormerlyFormerlyB-14 Comparator Set - All 14Comparator Inserts shown above.Order No. 005-B14 $44.325 pc. Bushing Kit OnlyHeadspace Body & 5pcBushing KitOrder No.005-HK55005-HK66Headspace Bushings $5.96ea(See Size Chart )Order No.005-A330005-B350005-C375005-D400005-E420Price$23.2134.29A - 330” Headspace BushingB - 350” Headspace BushingC - 375” Headspace BushingD - 400” Headspace BushingE - 420” Headspace Bushing.330" 17 Rem, 222 Rem, 222 Rem MAG, 223 Rem, 220 SWIFT, 221 Rem FB.350" 22 PPC, 22/250 Rem, 6PPC, 6 BR Rem, 250 SAV, 7 BR Rem, 7X30 , 22 BR Rem.375" 6mm Rem, 257 ROB, 25/06 Rem, 270 WIN, 7X57mm Mauser, 280 Rem, 30/30 WIN,30/06 SPFLD, 7.62 X 39 Russian, 303 BRIT, 300 H&H MAG, 30-40 KRAG, 22 Cheetah.400" 243 WIN, 7mm/08 Rem, 308 WIN, 7mm STE.420" 284 WIN, 7mm Rem MAG, 300 WIN MAG, 8mm Rem MAG, 338 WIN MAG, 375 H&H,7mm STW, 6mm/284 WIN, 358 WIN, 338/06, 30/338 WIN MAGDial Caliper- Make precise measurements to .001. Measure case length, bullet diameter,inside/outside diameters, primer pocket depth. Stainless steel, locks down,comes in case. Order No. 005-050075 $26.09Micrometer- Measures bullet and case diameters to .001. Locks down on measurementand has adjustable “0”. Comes in a woodenpresentation case. Order No. 005-050071 $20.70Stuck Case Remover - Consists of #7drill and ¼ inch-20 tap. Remover bodyfits in universal shell holder ram ofmost any standard reloading press. Nowrenches required. No chance of damagingsize die. Fits most presses withuniversal shell holder ram.Order No. 005-050033 $12.23Hornady Ammunition Concentricity Tool - Make bullet runouta thing of the past with the new Hornady AmmunitionConcentricity Tool. Hornady never ceases to find ways to provideunmatched accuracy in every facet of the shooting experience.The new Ammunition Concentricity Tool is the first tool on themarket to both identify and eliminate bullet runout. Just placeammunition in the tool, roll it, identify runout, and use the dialindicator to adjust runout to zero! It can be used to true-up factoryammunition, too. Order No. 005-050076 $93.0071

Here are just a few of theNew Reloading itemswe’ve picked up for 2011.Lock-N-Load®Bullet Feeder110 Volt (7/8" thread)Lock-N-Load®Case Prep Assistant -Compact! Its durable brushedaluminum housing and high torque, low speed motor willprovide years of dependable use. Included are chamferand deburr tools (Optional acc. sold separately below).8-32 thread allow use with any other 8-32 accessory.Unit is compatible with 110V or 220V power.Order No. 005-050155 $83.38Hornady Lock-N-Load®Bench Scale1500 grain capacitylets you weigh powder,bullets, cases, cartridges and more.The large LCD display is easy to read and weighs preciselyto one tenth (0.1) of a grain. Included are two calibrationweights, AC adaptor, 220V adaptor, and metalpowder pan. Order No. 005-050108 $87.89Hornady Lock-N-Load® DeluxeDie WrenchThe ultimate 4-in-1reloading tool foryour Lock-N-Load®AP or single stage Classic press. This tool holds theshell plate and keeps it from rotating while you changeplates and tighten the main press screw. It also adjuststhe tightness of the spindle lock and the lock rings, andcan tighten or loosen the die flats. No reloading benchshould be without one! Order No. 005-396495 $17.26Lifetime warranty,Bullet feeder dies aresold separately.Turn your progressive press into a bench mountedammo factory! The new Lock-N-Load Bullet Feeder isdesigned as an accessory for the Hornady Lock-N-LoadAP reloading press, but can be used with any otherpress with 7/8"-14 die threads.Caliber changeovers are quick and easy and there areno special tools required for adjustments. The easy-feedbullet hopper holds up to 200 pistol bullets and featuresan adjustable center plate and bullet feed-wipers toensure smooth feeding.NOTE: Bullet Feeder is designed for use with jacketed or platedpistol bullets only.L-N-L Bullet Feeder380/9mm Bullet Feed Die38/357 Bullet Feed Die40/10mm Bullet Feed Die44 Spl/Mag Bullet Feed Die45 Auto Bullet Feed DieOrder No.036-NQDT1745$8.84Order No. Price005-095320 $288.44005-095330 21.21005-095331 21.21005-095332 21.21005-095333 21.21005-095334 21.21Altraco Deburring Tool -17 - 45CalHornady Lock-N-Load® Magnum Sonic Cleaner -Designed with reloaders in mind, the Lock-N-LoadMagnum Sonic Cleaner excels at cleaning cartridgecases, but simply change over to Gun Cleaning solution,and it also works miracles on gun parts – it doesALL the work – clean pistol barrels, AR bolts, muzzleloader breech plugs and any other metal gun parts withhands-off ease. The adjustable heating element of theLock-N-Load Magnum Sonic Cleaner allows the userto dial in the correct temperature to maximize cleaningefficiency without damaging delicate parts. Includes astainless steel mesh basket for smaller parts.Tank dimensions: 9.4" x 5.5" x 3.9"3L Tank (3.2 qt) 110v (220v Available online)Order No. 005-043340 $230.52Redding National MatchDie Set - Redding nowoffers a specialized die setfor the military match shooter.The set includes a Full-Length Sizing Die aCompetition Bullet SeatingDie and a Taper Crimp Die.223 Rem308 Win30-06 SpfdNew Items from LeeReloading!See page 83One Shot Sonic Clean SolutionsCartridge Case Formula 1 QtOrder No. 005-043355 $18.18Gun Parts Formula 1QtOrder No. 005-043360 $18.18Order No.076-39111076-39155076-39148Price$136.56136.56136.56Altraco Calipers and MicrometersABDCA- Shop Grade Electronic Calipers - 4 way measurement with resolution / repeatability .0005” x 0.01mm. LCDdisplays 5 digits. Order No. 036-MCE6A $22.13B - Stainless Dial Calipers - 4 Way Measurement: Inside, Outside, Depth and Step. Comes in Plastic Box. Range:0"-6" Accuracy: 0.0001" Graduation: 0.001" Order No. 036-MCD61 $19.43C - Digital Thickness and Tube Diameter Gauge - Specifically designed to easily measure outside dimensions to1” and wall thickness up to .08” Order No. 036-MGR01 $48.00D - Case Thickness Micrometer with Oval Tip - Clear graduation on satin chrome finish thimble reads to .0001”.Accuracy +/- .00024”. Carbide tipped faces. Ratchet stop, Lock lever. Order No. 036-MMT01C $29.9372

Sonic CleanersLyman Turbo Sonic Ultrasonic Case Cleaner &Sonic Cleaning Solutions - Delivers ultrasoniccleaning that allows cleaning of cases inside and outin less than 10 minutes! Processes up to 900 9mmcases in less than 15 minutesThe heated tank andLymans specially formulated cleaning solutions deliversuperior case cleaning of both case and primerpockets. Dissolves carbon, dirt and any other residueleft on cases. 110v (220v available online)Turbo Sonic Case CleanerCase Cleaning SolutionGun Part Cleaning SolutionOrder No. Price015-7631700 101.10015-7631705 10.80015-7631707 10.80Deluxe Carbide Expander /Decap Die RodCompleteUpgrade your existing die sets.Fits all Lyman Sizing Dies.- Fits All Lyman Sizing Dies- Carbide Button can be adjusted forheight- Carbide free floats on the rod forself-centering in case necks- Replaceable decapping pin22 Caliber6mm6.5mm270 Caliber7mm30 CaliberFeatures & Benefits• Designed for AR-style andsemi-auto rifles• Distinctive black RCBS®die box• Taper Crimp bullet seating• Small Base sizing• RCBS Limited LifetimeWarrantyOrder No. Price015-7680300 $21.64015-7680302 21.64015-7680304 21.64015-7680306 21.64015-7680308 21.64015-7680310 21.64Lyman Case Prep Xpress - The only “All Inclusive”case prep system which offers all of the most popularcase prep accessories. It’s driven by a high tourquegear motor, and allows you the use of 5 different caseprep operations at one time. All the accessories areincluded from the start.Includes:Inside Deburr tool (VLD) ToolOutside Deburr Tool Primer Pocket Uniformer (Sm & Lg)Flash Hole Uniformer Primer Pocket Reamer (Sm & Lg)Case Neck Lube (Mica) Primer Pocket Cleaner (Sm & Lg)Clean Up BrushCase Neck Brush (25, 30, 38, 45 Cal)Removeable Brass Shaving PanOrder No.015-7810220 $96.62Lyman Case Prep Multi-ToolMTM Case-Gard DS-750 MiniDigital Reloading Scale -•Powder pan, custom designed to dobullet, powder and arrow weighing•Extended, 3 minute auto shut-off•Stainless steel sensory platform•Plus or minus .2 grain accuracy•Up to 750 grain capacity•Measures in grains, grams,carats and ounces•High-impact, plastic sensorycover that doubles as largepowder pan•Calibration weight included•Uses 2 AAA batteries(included)Order No.008-DS750 $27.77MTM Reloading EssentialsNow Workswith Fat MagnumsLT-150 Reloading Tray- Patented Case-Gard 150metallic reloading tray is the most versatile on the openmarket. Designed for .17 Rem. through .458 Win., aswell as 9mm, .38, and .45. Now also works with FatterMagnum calibers like WSM & WSSM, Rem Ultra Mag &500 S&W! Order No. 008-LT150M $5.40MTM Die Box - Holds 4 fullsets of reloading dies, plus 4shell holders and last roundloaded off each set of dies.Tall enough for almost all rifledies. Comes with built in carryinghandle and snap lock lid.Order No. 008-DB4 $11.69AR Series Dies - The new RCBS® AR Series is amust for the progressive reloader. It features a SmallBase sizing die and a new Taper Crimp seating die.This combination makes reloading easier for AR-styleor semi-auto shooters. The Small Base sizer guaranteesthat the cartridge will rechamber. The Taper CrimpSeater is more forgiving when various case lengths areloaded at the same time. Case neck crimp bulges andbuckled shoulders are virtually eliminated when Tapercrimping is used with cannelured bullets.Caliber204 Ruger SB223 Rem SB243 Winchester SB30-06 Spfd SB308 Win SB30 Remington AR SB6.5 Creedmoor SB7.62x39mm SBAdapto Funnel- Patented MTMAdapto 5 in 1 Funnel Kitincludes funnel adapters for .17Rem., .222 Rem., and .30through .45, plus long-dropadapter for maximum capacityloads, .222 Rem. through .45.Comes with storage case!Order No. 008-AF7 $11.13Die Set$36.54044-10307044-11107044-11407044-14807044-15507044-25307044-32907044-35007Seater Die$33.71044-10362044-11162044-11462044-14862044-15562044-25362044-32962044-35062The MTM Primer Flipper- Anindispensable time saver for turningprimers anvil side up, especiallywhen using an automaticfeed priming device.Order No.008-PF $2.90New Adapterfor WSM,WSSM &Ultra MagsMTM Ammo BoxesSee Pages 106 & 107Provides you all the essential Case Prep Accessories inone compact double-ended storage tool. Knurled handleunthreads in the middle to store all parts. Both ends arethreaded for 2 tools at once use.Includes:Inside Deburr tool (VLD) ToolOutside Deburr ToolPrimer Pocket Reamer (Sm & Lg)Primer Pocket Cleaner (Sm & Lg)Order No. 015-7777800 $17.34Log BookReloading Labels 50 per packGlow Ammo ColdTracer KitsSee page 116MTM Ammo Can-750 Cubic inches of durablestorage for anythingfrom ammo toreloading equipment.Thick highwallconstruction. Largehandle, heavy-duty latch,double padlock tabs, made ofrugged polypropylene.Order No. 008-AC11 $12.63Handloaders Log & Labels-An absolute must for the seriousreloader. Now with a totalof 150 pages. Space is providedfor recording extremelydetailed data (ammo performance,'pet' loads, shotshelldata, firearms inventory, etc.).Labels sold separatelyOrder No.008-HL95008-LL1Price$20.143.4173

Lyman Reloading Presses and AccessoriesHow to pick which Expert Kit is for you - Choose the press that best suits yourreloading needs: If you reload only once in a while the Crusher II is for you, but if youshoot often and reload every week or month, then the T-Mag Turret Press is for you.Lyman's Expert Reloading Kit - The best way to get started in reloading with all thetop equipment. Includes your choice of the T-Mag II Turret Press or the Crusher IISingle Station Press. Expert Kits are no caliber, which means that you buy a die set forthe caliber(s) you are to reload. Each kit also contains: universal trimmer (with 9 pilots).Pro 500 scale, 55 powder measure, case lube kit, powder funnel, deburring tool took,auto primer feed, primer tray and Lyman's New, 48th edition reloading handbook!Order dies and shell holders separately and have a complete Expert Reloading Kit!T-Mag Expert KitCrusher II Expert KitT-Mag Expert Kit with 1000XP Electronic ScaleCrusher II Expert Kit with 1000XP Electronic ScaleOrder No.015-7810140015-7810120015-7810142015-7810149Price$361.14330.01365.80341.38Ideal forPistolReloadingT-Mag II and Crusher IIPress Accessories areavailable to the right.T-Mag II Press- The new T-Mag II Press has anew hi-tech frame design with silver hammertonepowder coat finish. Base is flat machined for solidmounting to wood or metal bench. Six die stationsaccommodate a 3 die pistol set, a 2 die rifle set anda powder measure. Leave extra dies mounted andready. Removeable turret features indexing handle,which also removes turret. Handle mounts for right orleft hand use. Order No. 015-7040781 $165.03The Crusher II- is a true magnum press with classic "O"frame design that combines a 4 1/2" press opening withcompound leverage for easy loading of even the largest rifleand pistol cartridges. Handle mounts for right or left handuse. Includes universal priming arm and primer catcher.Order No. 015-7726300 $115.69Extra T-Mag Turret - With an extra detachable T-MagTurret, reloaders can maintain precise set-up whilechanging calibers. (Will fit old T-Mag).Order No. 015-7726153 $36.63Primer Catcher - Made of heavy duty plastic. Unit lockssecurely to press, but is easily removed when emptyingprimers. Fits Crusher II, T-Mag Compound PressesOrder No. 015-7726420 $5.96Auto-Primer Feed - Eliminates handling of primers withoily fingers, speeds loading. Supplied with two tubes(large and small). Fits T-Mag II and Crusher II.Order No.Auto-Primer Feed 015-7729050 $20.50Feed Tube Lg 015-7412053 4.70Feed Tube Sm 015-7412052 4.70Universal Priming Arm - Seats all sizes and types ofprimers. No extras to buy. Comes with two primingsleeves (lg and sm). Order No. 015-7728036 $12.24Crusher II Pro Kit - Lyman's NEW Crusher II reloadingKit offers big savings on all the basic tools needed toget started in reloading quality rifle and pistol cartridges.Along with the press, this kit includes the Pro 500 scale,case lube kit, primer tray, powder funnel, loading block,and the New, 48th Ed. Reloading Handbook. Just adddies and shellholder of your choice & you’re reloadingwith the best. Order No. 015-7810270 $177.85Lyman's new 49th EditionReloading Handbook -SoftcoverOrder No.015-9816049 $18.00HardbackOrder No.015-9816052 $25.7255 Powder MeasureThis powder measure dispenses acharge of smokeless powder with consistentaccuracy to a fraction of a grain.The key to this unfailing precision is the55's unique three-sided micrometeradjustablecavity. 2400gr clear PVCplastic reservoir resists chemical action.Attached knocker assures a completecharge every time. Mount on yourbench or any turret press. No funnelrequired. Optional powder measurestand available.#55 MeasureStandPowder BaffleOrder No.015-7767783015-7767784015-776775855 Classic Powder MeasureLyman’s 55 Classic Powder Measure isideal for the Cowboy Action Competition orthe growing number of black powder cartridgeshooters. 1lbs capacity aluminumreservoir, brass powder meter, internalpowder baffle, 24” drop tubes work for .38thru .50cal. Clamp for mounting.Price$69.4523.106.47Order No. Price55 Classic -Standard w/o tubes 015-7767760 $99.0255 Classic -w/ drop tubes 015-7767775 114.62Black Powder Drop Tubes Only 015-7767764 25.97Lyman Shell Holder Set - Best Value!12 Piece Shell Holder Set, in ahandy storage box, with one ofeach number: 1, 2, 6, 7, 11,12, 13, 14B, 15, 17, 22,and 26.Order No.015-7712110 $26.01Detachable Shellholders - Precisely machined toinsure perfect case fit. Fits all popular presses. Forproper fit, see the Lyman die listing and look next to thecaliber you are interested in. The shell holder numberwill follow. Example: 204 Ruger (SH#26) $5.42 eachS.H.X-1X-2X-3X-4X-5X-6X-7X-9X-10X-11X-12X-13X-14BOrder No.015-7738040015-7738041015-7738042015-7738043015-7738044015-7738045015-7738046015-7738048015-7738049015-7738050015-7738051015-7738052015-7738054S.H.X-15X-17X-19X-21X-22X-23X-26X-27X-30X-32X-33X-34X-35X-36Order No.015-7738055015-7738057015-7738060015-7738075015-7738062015-7737486015-7738063015-7738064015-7737492015-7738066015-7738069015-7738148015-7738149015-7738150J to X Shellholder Adapter - For use with Lyman’s olderpresses which used the older J-Type shellholders.Converts press to use current X-Type shellholders.Order No. 015-7095762 $10.0874

Rifle Caliber Rifle 2 Die Classic 3 Die Rifle 3 Die Neck Size Rifle M DieSet Set Set Only Only$25.40 $41.44 $35.06 $19.11 $14.41*26.48 $39.76* $33.64*204 Ruger (SH#26)22 Hornet (SH#4)22-250 (22Varminter) (SH#2)222 Remington (SH#26)222 Remington Mag (SH#26)223 Remington (5.56mm) (SH#26)223 Win Super Short (SH#34)243 Win Super Short (SH#34)243 Winchester (SH#2)25-06 Remington (SH#2)260 Remington (SH#2)270 Winchester (SH#2)270 WSM (SH#2)7mm Remington Magnum (SH#13)30-30 Winchester (30WCF) (SH#6)30-06 (7.62x63mm) (SH#2)308 Winchester (307 Win) (SH#2)220 Swift (SH#5)6mm Remington(244 Rem) (SH#2)250 Savage (250-3000 Sav) (SH#2)257 Roberts (SH#2)25/20 Win (SH#10)6.5 x 55 Swedish Mauser (SH#27)7mm STW (SH#13)7mmx64 Brenneke (SH#2)7x65R Brenneke (SH#14B)30 M-1 Carbine (SH#19)7mm Rem Ultra Mag (SH#13)7x57 Mauser (7mm Mauser) (SH#2)280 Rem (7mm Rem exp) (SH#2)7.65mm Arg Mauser (SH#2)32/20Win (SH#10)7.62x39mm (SH#3)7.62x54 Russian (SH#17)7x30 Waters (SH#6)7mm-08 Remington (SH#2)300 Rem Ultra-Mag (SH#13)300 Rem Ultra Mag SA (SH#13)300 Savage (SH#2)300 Weatherby Mag (SH#13)300 Winchester Magnum (SH#13)300 Winchester Short Mag (SH#13)303 British (SH#7)32 Winchester Special (SH#6)8x57 Mauser (8mm Mauser) (SH#2)338 Winchester Magnum (SH#13)338 Ultra-Mag (SH#13)35 Remington (SH#2)35 Whelen (SH#2)358 Winchester (SH#2)375 H&H Magnum (SH#13)375 Rem Ultra Mag (SH#13)38/55Win (SH#6)40-65 Win (SH#17)40-70 Sharps Straight (SH#33)416 Rigby (SH#17)44-40 Win (SH#14B)444 Marlin (SH#14B)450 Marlin (SH#13)45/70 Government (SH#17)45-90 (SH#17)45-100 Sharps (SH#17)45-110 Sharps (SH#17)45-120 Sharps (SH#17)50/70 Government (SH#22)50-90 (SH#22)$51.52 $40.28 $30.30 $16.58 $14.41------015-7680203015-7680200015-7680200-015-7680207015-7680207---015-7680213015-7680208015-7680208---015-7680113015-7680113015-7680113015-7680112015-7680116015-7680116---015-7680119015-7680118015-7680118015-7680105--015-7680105015-7680107015-7680107015-7680110015-7680122015-7680124-------015-7590179015-7590179---015-7590180--015-7590180015-7596323015-7596323---------015-7153097015-7153101015-7153101-015-7153116015-7153116015-7153105015-7153105015-7153107015-7153105015-7153107015-7153107015-7153107-----015-7342081015-7341801015-7342081015-7342081015-7341801015-7341801-015-7340833015-7340833015-7340820015-7340820015-7340832015-7340820015-7340832015-7340832015-7340832015-7340832015-7340834(Same As)Pistol Caliber Carbide 4 Die Carbide 3 Die Carbide Size Taper Crimp Neck ExpandingSet Set Die only Die Only M Die32 ACP (SH#23)32 S&W Long (SH#9)32 H&R Magnum (SH#9)380 Auto (SH#26)38 S&W (SH#21)38 Super Auto (SH#12)9mm Luger (SH#12)38 Special/357 Mag (SH#1)357 Rem Max (SH#1)9mm Mak (SH#12)40 S&W (SH#15)10mm Auto (SH#15)44 Mag/44Spl (SH#7)44 Russian (SH#7)45 Scofield (SH#14B)445 Super Mag (SH#7)45 ACP (SH#2)45 Mag (SH#2)45 Colt (SH#11)454 Casull (SH#11)480 Ruger015-7452276015-7452277*015-7452280--015-7457111015-7452346*015-7452351*015-7452283015-7455495*015-7452285*015-7452289015-7452288*015-7455496*015-7452299*015-7452301015-7452298015-7452281*015-7452334*-015-7452287*-015-7452340*015-7455498*---015-7452292*015-7452290*015-7452343*015-7458843*-015-7459110*015-7452291*-015-7455646-015-7455654*015-7452295*015-7455638*015-7455647*015-7455652015-7452296*015-7452304*015-7452305*015-7452338*-015-7458587*--015-7452316*----015-7455449---------------------------------------------------------------015-7460490015-7460492-----015-7460499*015-7460520015-7460522015-7460506*-015-7460501---------------------015-7469042----015-7460475----015-7460484--------------------015-7460494*---015-7460495015-7467151015-7460524015-7460496*----015-7660121-----015-7135006015-7135015--015-7135033---015-7135049015-7135047-----015-7135124-----------------015-7135051-----------015-7135126015-7135055015-7135055----015-7135057015-7135057015-7135057015-7135059015-7135059---015-7349058015-7342097015-7342097015-7342097015-7342097015-7349007015-7349057015-7349052015-7349009-015-7349011015-7349003015-7349002015-7349002015-7349024015-7349007015-7343005015-7349057015-7342089015-7349052015-7349011015-7349011015-7349011015-7349004-015-7349011015-7349011015-7349005015-7343006015-7349003015-7349002015-7349011015-7349011015-7349002-015-7349003015-7349002015-7349002-015-7349005015-7342073015-7349018015-7340762015-7340762015-7340809015-7342074015-7342074015-7349015-015-7349015015-7343007015-7343007-015-7342102015-7348739015-7349053015-7349053015-7349053015-7349053015-7349053015-7349053015-7342107015-7342109-22H22S22S22S22S2425L2627-2830S30L30L22L2425S25L25-202628282830M1-282831L31S30S30L282830L-30S30L30L-31L328MM333335S35L35L37-3740L40L-44-4044445-7045-7045-7045-7045-7045-7050-7050-90Lyman Rifle DiesRifle 2-Die Sets -Includes: Full lengthresizing die (with decapping stem and neckexpanding button) and a bullet seating die.Best choice for loading jacketed bullets inbottlenecked rifle cases. For cast bullets,Lyman suggests the addition of a neckexpanding M Die, sold separate.Rifle 3-Die Sets -Straight wall rifle casesrequire these three die sets consisting of afull length resizing die (with decappingstem) a two step neck expanding (M) dieand a bullet seating die. Ideal for loadingcast bullets because of the neck exp.die.Classic Rifle Die Sets -Lyman responds tothe requests of Black Powder Cartridgeand Cowboy Action Shooters to bring backdie sets for the classic cartidges. Thesestandard 7/8" x 14 3-die sets will fit mostbrands of reloading presses and includeLymans popular “M” neck expanding dieThe Two-Step Neck-Expanding (M) DieImproves accuracy of cast and jacketedbullet reloads. Doesn’t stretch cases asdoes standard expander button. Extendscase life.Ram Prime DieSystemDesigned for sensitive oneat-a-timeseating on top ofa press. Includes large andsmall primer punches.Order No.015-7728040 $14.41Black Powder TaperCrimp DiesAllows proper neck tension and minimaltaper which is ideal for the compressedblack powder charges.40 Caliber45 Cal Short45 Cal Long015-7153120015-7153124015-7153126$16.5816.5816.58Die Bench Wrench - A versatilesteel combination wrench to fitLyman and RCBS 7/8x14" LockNuts, plus Lyman's decap rod,seating screw and expander plugnuts.Order No. 015-7990116 $3.43Lyman Pistol DiesPremium Carbide 4-Die Sets 4-Die Setsfeature a separate taper crimp die andpowder charge/expanding die. The powdercharge/expand die has a special hollow 2-step neck expanding plug which allowspowder to flow through the die from a powdermeasure directly into the case. Thepowder charge/expanding die has a standard7/8 x 14 thread and will acceptLyman’s 55 Powder Measure, or mostother powder measures.3-Die Carbide Pistol Die Sets Features; aone piece hardened steel decapping rodand extra seating screws for all popularbullet nose shapes, and steel construction.75

Lyman Universal Trimmer50 cal BMG Trimmer w/PilotAccutrimmer with PilotsOutside Neck TurnerOrder No.015-7821985015-7821987015-7821988015-7821993015-7821986015-7822013015-7821989015-7821999015-7821990015-7821991015-7821992015-7822009015-7822010015-7821994Size#17 Pilot#22 Pilot#24 Pilot#25A Pilot#25 Pilot#26 Pilot#27 Pilot#28 Pilot#29 Pilot#30 Pilot#31 Pilot#36 Pilot#47 Pilot#32 Pilot(Shown with optionalOutside Neck Turner)Order No.015-7862130015-7862210015-7810185Order No.015-7821995015-7821996015-7821997015-7822001015-7822002015-7822003015-7822004015-7822014015-7822005015-7822006015-7822007015-7822008015-7821983015-7821982*Price$45.8346.1728.05Size#8mm Pilot#33 Pilot#9mm, 34 Pilot#35 38/357 Pilot#37 Pilot#39 Pilot#41 Pilot#416 Pilot#44A 44-40 Pilot#44 44M Pilot#45A 45P Pilot#45 45R Pilot#50 50AE Pilot#50 BMGEach Lyman Trimmer comes with a 9 pilot Multi-Pack. Includespilot numbers: 22, 24, 27, 28/7mm, 30, 9mm, 35 (.357/.38), 44and 45A.015-7862000015-7862003Lyman's Universal Trimmer with 9 pilot multi-pack has long been the favorite among reloaders. Now, with Lyman's new poweradapter, you can convert your trimmer to power in seconds. Simply unscrew the cutter head, slide it out of the shaft and replaceit with the adapter. Power adapter fits any standard electric drill or power screwdriver (You Must Use Your Own Drill or PowerScrewdriver). Power Pack includes both hand trimmer and power adapter at one best buy special price.Universal Trimmer w/multi packPower Pack with UniversalTrimmer & Power AdapterOrder No.015-7862000015-7862003Price$72.2080.95Power Adapter Only- ConvertsStandard Lyman Universal Trimmer toPower ......in SecondsOrder No. 015-7862001 $18.30Lyman Power Trimmer with ChuckheadLyman's Power trimmer with universal chuckhead will trim cases from .17 caliberon up, quickly and easily. Uses 175 rpm motor in 110 or 220 volt. Includes ninepilots and two cutter heads. Also has separate high speed drive for brushes &primer pocket cleaning. 220v is special order only.Power Trimmer 110 VoltPower Trimmer 220 VoltOrder No.015-7862005015-7862006Lyman Accutrimmer with PilotsPrice$225.83231.74Carbide Cutter Head forCase Trimmers(1 pk)Replacement Cutter Headfor Trimmer (2 pk)Order No.015-7822204015-7822203Designed to trim the 50BMG case specificallyACCUTRIMMER uses standard shell holders to position cartridge case and is an excellent value. Trims cases .17 through.458 Win Mag. The Outside Neck Turner is a simple to operate tool used to uniform neck wall thickness and outside neck diameter.(Works with both Lyman Accutrimmer and Universal Case Trimmer.)Price$30.4412.64015-7862001Ream and Clean Accessories - This setfits Lyman Universal Trimmer andAccutrimmer. Kit includes reamers andcleaners for primer pockets maintenence.Also includes necessaryadapters.Order No. 015-7777795 $11.2050cal BMG Trimmer with PilotLyman Pilots for TrimmersTrimmer Pilots - See the Chart on the right for the correctcaliber. $3.43 ea *$3.58eaNine Pilot Multi-Pack -Includes 9 of the most popularpilots: 22, 24, 27, 28/7mm, 30,9mm, 35 (38/357), 44 and 45A.Order No.015-7822202 $11.92Trimmer Pilot Chart Use this chartto find Trimmer PilotsRifle Calibers17 Remington 17 015-7821985204 Ruger 20 015-782198122 Hornet 22 015-7821987221 Fireball 22 015-782198722-250 22 015-7821987220 Swift 22 015-7821987222 Remington 22 015-7821987222 Remington Mag 22 015-7821987223 Remington 22 015-78219875.6 x 50R Mag 22 015-7821987243 Winchester 24 015-7821988244, 6mm Remington 24 015-782198825 WSSM 25 015-782198625-20 25 015-782198625-06 Remington 25 015-7821986250-3000 Savage 25 015-7821986257 Roberts 25 015-78219866.5 x 55 Swedish 26 015-7822013260 Remington 26 015-78220136.5 x 57 Mauser 26 015-78220136.5 x 57R Mauser 26 015-7822013270 Winchester 27 015-7821989270 WSM 27 015-78219897mm/08 Remington 28 015-78219997-30 Waters 28 015-78219997mm Rem Mag 28 015-78219997mm Rem Ultra Mag 28 015-78219997mm Weatherby Mag 28 015-78219997mm STW 28 015-78219997 x 57 Mauser 28 015-78219997 x 64 Brenneke 28 015-78219997 x 65R Brenneke 28 015-7821999280 Rem (7mm Exp) 28 015-782199930M1 Carbine 30 015-782199130-30 30 015-7821991300 Savage 30 015-7821991307 Winchester 30 015-7821991308 Winchester 30 015-782199130-06 30 015-7821991300 Winchester Mag 30 015-7821991300 Rem Ultra Mag 30 015-7821991300 RemUltraMag SA 30 015-7821991300 Weatherby Mag 30 015-7821991300 WSM 30 015-78219917.62 x 39 30 015-782199132-20 31 015-78219927.65 Arg Mauser 31 015-78219927.62 x 54 Russian 31 015-7821992303 British 31 015-782199232 Win Special 32 015-78219948 x 57 Mauser 8mm 015-78219958 x 57 JS 8mm 015-78219957.9 x 57 8mm 015-78219958 x 57JRS 8mm 015-78219958mm Rem Mag 8mm 015-7821995338 WinMag 33 015-7821996338 Rem Ultra Mag 33 015-782199635 Remington 35 015-7822001356 Winchester 35 015-7822001358 Winchester 35 015-782200135 Whelen 35 015-78220019.3mm x 62 36 015-7822009375 Winchester 37 015-782200238-55 37 015-7822002375 H&H Magnum 37 015-7822002375 Rem. Ultra Mag. 37 015-782200240-65 41 015-782200440-70 Sharps Straight 41 015-7822004416 Rigby 416 015-782201444-40 Winchester 44A 015-7822005444 Marlin 44 015-7822006450 Marlin 45 015-782200845-70 & .45-90 45 015-782200845-100 45 015-7822008Pistol Calibers25 A.C.P. 25A 015-78219937mm TCU 28 015-782199930 Luger 30 015-782199130 Mauser 30 015-782199132 ACP 31 015-782199232 S&W Long 31 015-782199232 H&R Mag 31 015-782199238 Super Auto 9mm 015-78219979mm Luger 9mm 015-78219979 x 23mm 9mm 015-7821997380 Auto 9mm 015-782199738 S&W 35 015-782200138/.357 Mag 35 015-7822001357 Rem Maximum 35 015-78220019mm Makarov 36 015-782200940 &W & 10mm 39 015-782200341 Mag 41 015-782200441 Action Express 41 015-782200444 Mag/ Spl/.44 Russ 44 015-782200644-40 Winchester 44A 015-782200545 ACP/.45 Win Mag 45A 015-782200745 Schofield 45A 015-782200745 Colt 45A 015-7822007454 Casull 45A 015-7822007475 Wildey 47 015-782201050 Action Express 50A 015-782198376

Lyman Case PreparationBCADEA- Chamfer/Reamer -Lyman's new VLD (very low drag) Chamfer/Reamer eliminatesdamage to bullets caused by the sharp edges of the cartridge case neck. The longboattail on Sierra VLD Match bullets are cut by the case mouth when chamfered witha standard 45 degree reamer. The sharp 22 degrees on the VLD reamer allows all bulletsto slip easily into the case ensuring the best accuracy. Ideal For Sierra MatchBoattail Bullets! Order No. 015-7777789 Price $9.03B- LYMAN CASE PREPARATION KIT -Kit contains all tools needed for proper casepreparation. Includes L&S Primer pocket reamer, L&S primer pocket cleaner, deburringtool, 3 neck brushes and 2 threaded handles. A truly nice kit!Order No. 015-7777796 Price $25.06C- The Case Care Kit -Kit includes the new pedestal crank, chamfer/deburring tooland a ream clean accessory kit. Order No. 015-7777793 Price $32.47D- Flash Hole Uniformer -Removes internal flash hole burrs. Consists of a tool steelcutter, shaft, shoulder stop and handle. Improves accuracy on reloads. Works with calibers.22 through .45 Order No. 015-7777760 Price $11.37E- Case lube Kit -Everything you need to clean and lube cases inside and out in onepackage. Large cloth lubricating pad dispenses lube evenly. Includes 2 oz. of Lymancase lube, interchangeable neck brushes, and wooden handle.Order No. 015-7631300 Price $14.81HKLOFMJGINPQF- Cordless Power Case Prep Tool - High torque rechargeable power driver turns atthe perfect speed for performing inside and outside deburring operations in seconds.Set includes all the essential case prep accessories, including large and small primerpocket reamers and cleaners, case neck brushes, and inside/outside deburring tools.With the hex adapters (included), accessories simply pop in and out of the driver, (nothreading or chucking required). Set also includes standard and Phillips driver bits.Order No. 015-7777758 Price $43.43G- Power Accessories Kit Only -The kit includes all the essential case prep accessories,including large and small primer pocket reamers and cleaners, case neckbrushes, inside and outside deburring tools. Order No. 015-7999050 Price $27.63H- In/Out Deburring Tool -Cuts deburring time in half. Simultaneously chamfers anddeburrs trimmed cases. Adjustable cutting blade adapts to any rifle or pistol case from.22 thru .45 with hex adjustment wrench. Order No. 015-7810210 Price $12.10I- Primer Pocket Uniformers -This precision tool features factory pre-set stop collarto uniform primer pocket depth to SAAMI specs. Improves accuracy. Designed for riflecases only. LARGE- Order No. 015-7810215 Price $14.81SMALL- Order No. 015-7810218 Price $14.81J- E-Zee Case Gauge -A quick and accurate gauge to measure case length for bothfired and resized cases. Measure over 50 of the most popular rifle and pistol cases.Great for sorting large quantities of mixed brass.Order No. 015-7832215 Price $14.41New“SureGrip Handle”Outside Chamfer Tool -Removes excess brass fromtrimmed cases. Deburrs the outside case mouth toleave a smooth even finish. For 17 cal- 45cal.Complements VLDTool.Order No. 015-7810222 Price $9.17“Universal” Case Prep Accessory Tool Set - All theitems necessary for quality case preparation in one deluxeset. Includes both large and small primer pocket reamers,primer pocket cleaners, outside deburring tool, inside(VLD) chamfer and large and small uniform tools.Order No. 015-7810212 Price $51.30K- Case Spray Lube -5.5 ounce spray can. Lubricates cases in seconds. Won't harmpowder or primers! Good for many other uses! Order No. 015-7631296 Price $6.14L- Lyman Loading Block -Holds 50 Rifle or Pistol cases. .22 through .45 cal. Moldedof heavy duty plastic. Order No. 015-7728054 Price $4.88M-Lyman Magnum Inertia Bullet Puller - Safely strips loaded ammo in seconds withoutdamage to bullet or case. Use on tiny 5.7 X 28FN to the largest Magnums.Order No. 015-7810216 Price $15.77N-Case Neck Dipper -Help prolong cartridge case life. The three brush set rids ofcombustion residue in cases from .17 to .45 caliber. Dip in the furnished dry lube. Helpsreduce friction! Now available: Mica Replacement Refill (1 oz.) NO MICA PRODUCTSCAN BE SHIPPED TO CALIFORNIA RESIDENTS!Case Neck Dipper- Order No. 015-7631360 Price $7.91Mica Refill- Order No. 015-7991415 Price $3.25O- Deburring Tools - Standard(.17-45cal)-Order No. 015-7810199 Price $13.39Extra Lg(.17-60 Cal)-Order No. 015-7810206 Price $17.20P- Pocket Cleaners - Large -Order No. 015-7777790 Price $7.19Small -Order No. 015-7777791 Price $7.19Q- Pocket Reamers - Large -Order No. 015-7777785 Price $7.19Small -Order No. 015-7777784 Price $7.19Checks bothoverall caselength and caseheadspace forboth loadedrounds andempty cases.Lyman PrecisionCartidge/CaseGauges9mm45 ACP44 Mag40 S&W.30-06.308.22/250.270.243.223Order No. Price015-7832330 $11.52015-7832331 11.52015-7832336 11.52015-7832332 11.52015-7832320 15.53015-7832321 15.53015-7832324 15.53015-7832325 15.53015-7832322 15.53015-7832323 15.5377

Lyman Precision Scales and Powder MeasurersNew! 1200DPS 3 Digital Powder System - Lyman's Revolutionary 1200DPS Digital Powder System combines a precision electronicPowder Scale and an automatic Powder Dispenser into one easy to use design. The new DPS 3 is more than twice as fast as theoriginal DPS. Features a new Auto-Repeat Setting enabling you to throw a precise charge automatically each time the pan is put inplace. This scale has the capacity to store up to 100 of your favorite loads. Best of all, you can easily recall any of them by Cartridge,Specific Powder and Weight. No Powder Calibration (Flow Rate) is required, just select the load you want and start dispensing powder.It dispenses powder quickly and is accurate to + or - 1/10 grain. It can be used as a complete Dispensing System, just a scaleor as a Scale and a Powder Trickler. The 1200DPS 3 is faster, accurate and affordable. Note: not for use with black powder.110v Order No. 015-7752400 $264.01220v Order No. 015-7752411 $284.89DPS Speed Upgrade Kit - Upgrade Any DPS I or DPS II to equal theNEW DPS3 High Speed Performance! This inexpensive replacementsystem installs in seconds and requires no tools. In fact, it's easier thanchanging powders. Best of all, it speeds up any earlier DPS to the latest,state of the art performance. Order No. 015-7752428 $27.761200DPSII PC Interface- Tranfer memory from yourcomputer right to your 1200 DPSII. Includes aseparate reloaders log. Stores thousands of loads!Order No. 015-7752455 $28.86XP1500 Electronic Scale- It's the first scale that comes with a removable powder tricklerthat works in right or left hand mode. The 1500 is accurate to 1/10 grain over its fullweighing capacity. Features a fold back dust cover and handy "pop out" storage traywhich stows accessories. Includes calibration weight, AC adapter and cleaning brush.Also works with 9V battery.110v Order No. 015-7751500 $156.74XP1000 Electronic Scale- Ideal for the range ortable top. The new 1000 XP is accurate to 1/10 grainfor the full range of its 1000 grain capacity. Slick newuser friendly design has clear "snap lock" platformcover which rotates to full lay down position ormay be removed. Scale works on 9V battery orwith AC adapter. Calibration weight, powderpan and AC adapter included. 110vOrder No. 015-7750750 $104.48Lyman Micrometers and CalipersBE-Zee Flo Universal Powder Trickler -Thefirst trickler that works with anyreloading scale. Adjusts in bothheight and reach distance.Order No. 015-7752477 $15.04Deluxe Scale Check Set -Includes:.5gr, 1gr, 2gr(qty 2), 5gr, 10gr, 20gr(qty2), 50gr, 100gr and tweezer)Order No. 015-7752313 $31.03Shooters Scale Check Set -Includes:.5gr, 1gr, 2gr(qty 2), 5gr, 10gr, 20gr(qty2), and tweezer)Order No. 015-7752314 $23.08ACDEA & B- Reloaders & Shooters 1” Micrometers -Lyman's 1" standard and digitalmicrometers allow the reloader to accurately measure the diameter of bullets and cartridges.Both feature spindle locks and friction thimbles. Reloaders Micrometer counterreads to .0001". Digital counter reads to .001" and by Vernier scale to .0001". Bothinclude a wooden storage case.1" Digital Micrometer Order No. 015-7832234 Price $34.841" Reloaders Micrometer Order No. 015-7832230 Price $20.17C- New! Case Neck Ball Micrometer -The New Lyman Case Neck Ball Micrometeroffers state of the art precision at an affordable price. Compare this micrometer to otherscosting over $100. This Ball Micrometer measures the neck wall thickness to.0001" for sorting brass cartridge cases. It is a must for those shooters who want to getthe best accuracy possible. It features a ratchet stop and spindle lock. Comes completewith a padded wooden storage box. Order No. 015-7832252 Price $38.91D- Stainless Electronic Micrometer -High tech digital readout switches back andfourth from inches to millimeters with the touch of a button. Accurate to .001”/0.1mm.Comes in a handy plastic storage case. Order No. 015-7832218 Price $37.52E- Stainless Dial Caliper -Plastic Case Order No. 015-7832212 Price $22.24Pro 500 ScalePro 1000 ScaleOrder No.015-7752222015-7752218Price$48.6159.03Powder Pal Funnel Pan -New! It is no longer necessary to puta separate funnel in the cartridge case to pour the powder in.Just pour directly from the Funnel Pan into the case. (Do notuse with beam scales)Order No. 015-7752433 $5.10Pro Series Scales -Lyman's Pro 1000 andPro 500 Scales provide top of the lineaccuracy at about 1/2 the cost of othermodels - features include high tech basedesign, x-large leveling wheel, improvedplatform and pan system. All the hardwareand features of standard Lyman 500 and1000. Accurate to 1/10th grain.Powder Dribbler- Use the full measure of accuracy built into a powderscale. Features a large powder reservior and tip-free base.Order No. 015-7832201 $10.11E-Zee Funnel - Redesigned with all of the latest cartridges in mind,Handles everything from .22 up to .50 calOrder No. 015-7752431 $3.6778

Lyman TumblersGABDEFA- Turbo Twin -OUR BEST VALUE! - Features interchangeable 2 bowl system forlarge or small loads. Comes with 1200 bowl (with a built in sifter) and the 600 bowl andlid. Interchangeable in seconds. Order media separately. Motor-Ball Bearings.110v Order No. 015-7631327 Price $63.09220v Order No. 015-7631328 Price $66.63B- 1200 Pro Turbo -Lyman's 1200 Pro Turbo features the same capacity and highendurance as our classic 1200 Turbo. The Pro Turbo has a working capacity of 350cases per cycle. The new base design has a beefed up suspension with upgradedmotor, guaranteed to outperform all other tumblers in its class. Order MediaSeparately. Motor-Ball Bearings. Order No. 015-7631318 Sale Price $45.291200 Pro Turbo Extra Bowl Order No. 015-7631323 Sale Price $15.13C- Auto Flo Conversion Kit - Allows conversion of standard tumblers to Auto-Flo tumblers.The 1200 Conversion Kit works for the 1200 and 600 models plus cost competitivemodels. Conversion systems include bowl, lid, auto flo drain base, media drainpan and appropriate stemware.(1200-600 Model also works with RCBS Vibratory casecleaner, and Vibrashine VS-15) Order No. 015-7631636 Price $23.62Lyman Super Moly ProductsCTUMBLER Media Charge #38 Spl cases600 1lbs 1751200 Pro&Auto 2lbs 3502200 5lbs 7502500 Pro Mag 4.5lbs 900D, E, F- Auto Flo Tumblers - The patented Lyman Auto Flo system allows for the automaticseparation of media from brass cases. When cases are clean, simply pull theAuto Flo drain plug and the media drains into the drain pan, leaving the bowl full ofclean, polished cases. Lyman offers a full range of Auto Flo models from 1200 size upto the giant Super Mag. Media drain pan included with all models. Motor Ball Bearings.1200 Auto Flo 110V 015-7631630 $74.082200 Auto Flo 110V 015-7631601 Sale! 112.912200 Auto Flo 220V 015-7631611 117.57Pro Mag 2500 Auto Flo 110V 015-7631697 100.33G- 2500 Pro Magnum Turbo Tumbler -To meet the special needs of the high volumereloaders Lyman offers a Large Capacity 2500 Pro Magnum model. The 2500 ProMagnum has a capacity of 900 .38 special cases per cycle.Order No. 015-7631692 Price $71.65Turbo Tumbler MediaProductsAB C D EA- Super Moly Tumble Kit -This kit contains everythingyou need to moly coat thousands of bullets! MolyCoating bullets reduces bore fouling and increases barrellife. This kit contains a Lyman 1200 tumbler, an extraheavy-duty moly coating bowl, 6 ounces of SuperfineGrade Moly, 2 pounds of finishing media and coatingmedia. This kit is ideal for casual or high volume shooterswho require maximum performance from theirfirearms. Complete step by step moly coating instructionsincluded. Order No. 015-7631343 Price $86.03B- Super Moly Bore Cream -Brushed directly into thebarrel, Super Moly bore cream moly coats your barrel inseconds! Designed to minimize barrel wear, and reducefouling.. Order No. 015-7631419 Price $12.62C,D- Super Moly Spray -Designed to spray directly onjacketed and cast bullets. Also works as a spray-onmould release. Ideal for moly coating without a tumbler.13oz Order No. 015-7631415 Price $20.294oz Order No. 015-7631417 Price $12.62Finishing Kit Replacement Medias(Not Shown)015-7631381 Replacement Ceramic Media $12.24015-7631392 6lb Easy Pour Untreated $12.46E- Super Moly Extra Fine Powder-For use in molycoatingtumbler. Super Grade Moly is extra fine and givesa superior finish. Coating instructions included. 6oz box.Order No. 015-7631412 Price $16.80F- Super Moly Acc KIt-Everything you need to SuperMoly Coat bullets! All you add is the tumbler! The twoheavy-duty bowls will fit the Lyman 600 and 1200Tumblers and most other brand tumblers of similar size.The kit contains two heavy-duty, long lasting bowls, 6ounces of Superfine Moly Grade powder, 2 pounds ofmedia and coating media. This kit will coat thousands ofbullets! Only a small amount of Superfine Grade Moly isneeded for a durable, high gloss , moly coated finish.Coating instructions included.Order No. 015-7631384 Price $40.66BIRCHWOOD CASEY MOLY LUBE DRYFILM LUBEDry film lube designed to lubricate and penetrateforming a smooth extremely slippery surfaceon metal. Easy to use! Uses an almostinstant drying solvent degreaser as the carrierin a convenient, 6oz aerosol can.Order No. 012-40131 $6.36F2 lbs. Corncob10 lb. box Corncob6 lb. Easy Pour Corncob12 lb. box TufNut(Pecan)7 lb. Easy Pour TufNut(Pecan)Turbo Media SifterTurbo Case Cleaner 16 oz.Turbo Charge (reactivator) 4 oz.Turbo Brite 5 oz.Turbo Brite 20 oz.Brass Baggies, 12 per packLead Free Polishing ClothOrder No.015-7631307015-7631320015-7631394015-7631333015-7631396Order No.015-7631321015-7631340015-7631322015-7631358015-7631361015-7631391015-7631350Price$6.6814.9211.7014.9211.70Price$7.597.194.705.1713.594.703.58Flitz Liquid Tumbler Media AdditiveOrder No8.5oz Bottle 194-TA04885Price$11.9179

Lee Breech Lock Challenger Press - Change dies instantly with atwist of the wrist, and you never have to re-adjust your die. IntroducingThe Breech Lock Quick Change Die System. A larger than average “O”frame opening allows for maximum hand clearance. The spent Primercatcher is positive and allows you to route the spent primers directly tothe trash can. Priming is a dream with the Lee Lever Prime System.Best of all, it includes the Breech Lock Quick Change die system. Pressincludes (3) Breech Lock quick change die inserts.Order No. 006-90588 $57.33Spare Breech Lock Inserts 2pk4 Die Breech Lock BoxOrder No.006-90600006-90422Price$7.043.13Lee Breech Lock Challenger Kit - Includes the new Breech Lock Challenger Press andthree Breech Lock quick-change bushings. Kit also includes Perfect Powder Measure, TheLee Safety Scale, Powder Funnel. Case Preparation Tools include a cutter and lock stud totrim cases, Lee chamfer tool, a tube of premium sizing lube, a small and large primer pocket-cleaningtool. But that’s not all! You also get the Auto-Prime and a set of Auto-Prime shellholders. Order No. 006-90030 $110.57Lee 50th Anniversary Breech Lock Challenger Kit - All of the items in the Breech kit butthe Auto prpime has been replaced with the Safety Prime. Order No. 006-90050 $97.60Lee Turret Press - A strong andpowerful tool. Compound linkagefull length sizes the largest magnumcases with ease.For left or right hand use! Built in primer catcher. Snap outturret. Primer arm lifts out to reverse for large or small size.Why fool around with screwing dies in and out when theconvenience of a Lee Turret Press actually costs less?Extra turrets are available in this section. This is a pressonly. Order Dies separately!!Turret PressUpdating Kit(includesfree 4 hole Turret)Order No.006-90496006-90933Price$67.5714.104 hole Turret Press w/ Auto Index - Lee now makes the TurretPress with a 4 station turret! This allows you to install yourFactory Crimp Die and Taper Crimp Die in the press. Updatingkit will convert your 3 station to a 4 in a matter of minutes!4 hole Turret Press with Auto-IndexUpdating Kit(includes free 4 hole Turret)Extra 4 hole TurretClassic Turret Press - The Classic Turret features the solidsteel linkage of the Lee Classic Cast. Your first stroke of thehardwood gripped lever will convince you this is one, solidsmooth press! The sturdy iron base shows its Classic Castroots. The long stroke allows rifle cases over three incheslong to be loaded using the automatic index. Deactivate theAuto-Index and cases as long as the monster 50BMG can beloaded. The rigid cast iron frame supports the ram with over12 square inches of area. Order No. 006-90064 $99.65Order No.006-90932006-90933006-90269Update KitPrice$74.3914.109.15Lee Safety Prime- Never touch the primers from box to shell.Primer flip tray features a CAD designed flipping surface thatinstantly rights the primers. Change primer size in seconds.Primers are dispensed with a satisfying click of the primer feedtrigger.Update Kit for pre·2006 presses -Order No. PriceEverything required to add primerLarge & Small 006-90997 $21.16feed. Includes both large and smallSafety Primer FeedOrder No. 006-90042 $28.21Deluxe Turret Reloading Kit w/AutoIndex (4 Hole Turret) - The rugged turretpress, along with the Auto Disk PowderMeasure, produce high quality pistol ammunitionwith the utmost in convenience. A finishedround with three strokes of the lever.When it is time to change calibers, simplysnap in a new turret and begin loading withinseconds. In addition the Deluxe TurretReloading Kit comes complete with: the LeeSafety Scale, a primer pocket cleaner, cutterand lockstud, and a chamfer tool. All youneed to start loading is a set of dies.Order No. 006-90928 $111.23Classic Cast PressLee’s Classic Cast Single Stage Press - Rigid castiron frame, cast and machined in the USA. Baked powderfinish and all steel linkage make this one of themost attractive and sturdy presses made. FeaturesLarge Opening, Classic “O” design for max strength,large flat base with 3 holes for mounting, Adj Handle,Auto Primer with large and small primer arms, LargeHollow Ram catches every primer. Threaded DieAdapter accepts 7/8-14” dies, remove and pressaccepts 1 1/4-12” Large series dies!Order No.006-90998Order No.223 Remington006-9023222/250006-90233243 Winchester006-90235270 Winchester006-902407mm Remington Magnum 006-9024230/30 Win (30 Rem) 006-90244308 Winchester006-9024530/06 Springfield006-9024845/70 Government 006-902649mm Luger006-9025438 Special006-90257357 Magnum006-90258*44 Magnum006-90260*45 ACP006-90262*45 Colt006-90263**These calibers require considerable force for sizingPrice$98.28Reloader Press - An outstanding value. Exclusive balancedlever that can't drop down to pinch your fingers. Unlimitedhand clearance that only "C" frame can offer. Works equallywell with the right or left hand. Even if you already own apress, an extra press is always useful for decapping, bulletseating or bullet sizing. Order No. 006-90045 $26.78Reloader Press & Manual - Get started with a Reloader Press. A fullsize reloading press that accepts all standard dies, plus a copy of"Lee’s Modern Reloading Manual 2nd edition"Order No. 006-90700 $38.65Hand Press- This press is more powerful thansome bench mounted tools. Even large magnumcases such as 375 H&H can be full length sizedand loaded. Uses standard 7/8”x14 dies.Order No. 006-90685 $28.65The Classic Lee Loader - The perfect tool for those who wish to simply try reloadingbecause it will pay for itself in just an hour or two. Everything you need to begin loadingone caliber. *These Calibers require considerable force for sizing $24.56 per set80

Lee Progressive Presses and AccessoriesLee Pro 1000 - The Progressive 1000 Press is shipped completewith carrier and shellplate, four tube case feeder, pro autodisk powder measure, and a set of Lee carbide dies. Casesusing the same shell holder require only a new die set to convertthe press. Order the optional Case Collator and case feedersseparately below. Each Lee Pro 1000 Press Kit is $165.8538 Special (can use for 357 Mag.)45 ACP9mm Luger40 S&W44 Special (can use for 44 Mag.)44 Magnum (cannot use for 44 Spec.)223 Remington45 ColtOrder No.006-90636006-90638006-90640006-90682006-90634006-90635006-90633006-90643Lee Case Collator for Proo 1000 andLoadmaster (Use with case feeders below) -For the ultimate in convenience, an extra CaseFeeder can be mounted on each shell plate carrier.This eliminates the need for readjustingwhen changing calibers. Fills all four tubes withcases in just 10 seconds!Order No. 006-90667 $10.56Small Case Feeder (9mm Luger)Large Case Feeder (45 ACP & longer)Rifle Case Feeder (222, 223, 30 M1)Extra Case Feeder Tubes (7 pack)Order No.006-90659006-90658006-90663006-90661Price$17.6317.6317.635.63Lee Loadmaster Kits - A big press with advanced features.The ram is 1 1/4" in diameter. Stroke clearance is enough for thelargest magnum calibers. The press has 5 stations and comeswith turret, carrier, indexer, primer catcher, case inserter, caseejector and chute.Grease and oil fittings insure a lifetime of service (even for commercialreloaders. Turrets are easily removed so calibers can bechanged in seconds not minutes. Uses any brand of dies. Orderthe optional Case Collator and case feeders separately above.Pro 1000 Shell Plate Carriers -To change calibers, the entireshell plate carrier can bereplaced, each unit comes completewith shell plate, autoprime, case ejector, auto index,tools and spare parts. Orderaccording to regular shell holdersize. Fits Pro 1000 Only!Lee Pro 1000 AccessoriesCaliber38 Spl, 357 Mag45 ACP222, 22332/30, 25/2030 M1 Carbine41 Mag44 Spl, 44 Mag, 45 Colt7.62x3938/40, 44/40, 45 Colt32 Auto40 S&W, 10mm, 9mm,38 Super, 38 Auto, 41 AE45 Win Mag45 Auto RimLee Progressive 1000 Priming Attachment Kit - The Pro 1000 Priming Attachment Kitis required if you are converting a carrier to another primer size. It is also nice to haveon hand for its extra primer tray. The kit contains large and small primer troughs, pins,springs, punches and a tray with cover. Order No. 006-90660 $8.463 Hole Turret - For Pro1000 Turret PressOrder No.006-90497 $7.74Lee Plate ##1#2#4#6#7A#9#11#12#14#7B#19#19(L) For 10mm Carrier#2A#13Shell PlateCarrier$38.77006-90644006-90645006-90646-006-90648006-90649006-90650---006-90683006-90662--Shell PlateOnly$14.10006-90651006-90652006-90653006-90976006-90655006-90656006-90657006-90666006-90065006-90668006-90669-006-90664006-90665Rifle kit includes: Press, dies, perfect powder measure, universalcharge die and case inserter.Pistol kits include: Press, carbide dies, pro-auto disk powdermeasure and case feeder.9mm Luger.38 Spec. (will load .357).44 Spec. (will load .44 Mag).45 ACP.45 Colt(will load 454 Casull).30/06Loadmaster Shell Plates - Loadmaster shell plate number fitthe same cartridges as numbers on shell holders, except number7A, it is for 30 M1 Carbine only! $21.14 eachOrder No.#1 38 Spec. 357 mag 006-90907#2 243,270,308,45A006-90908#3 22 Sav, 7.5mm, 375 Win 006-90909#4 222, 232, 380 Auto 006-90910#4A 32 S&W Long/32 H&R Mg 006-90059#5 257 Wby. 7mm R, 303B 006-90911#5A 303 Brit, 30/40 Krag 006-90085#6 32/20, 218 Bee, 25/20 006-90912#7A 30 M1 Carbine006-90913#7S 22 Hornet#8 348 Win, 45/70 Gov't#9 41 Magnum#10 220 Swift, 6.5 Jap#11 44 Spec/Mag, 45 Colt#12 7.62x39, PPC#14 44/40#19 9mm, 41 AE, 38 ACP#19L 10mm only5 Hole Turret For Loadmaster - Precision5-Hole Turret with 20 locking lugs takes justseconds to change out.Order No. 006-90079 $10.56Chain Pull Back (Fits Pro 1000 also)Order No. 006-90479 $2.10Order No.006-90936006-90938006-90943006-90945006-90946006-90931Price$238.88238.88238.88238.88238.88238.88Order No.006-90884006-90914006-90915006-90916006-90917006-90918006-90919006-90920006-90068Pro1000 and Load-Master Bullet Feed Kits - Thebullet feeder designed to directly fit the Pro1000 andLoad-Master. Automatically feeds bullets into themouth of the seating die. Aligns bullets more accuratelythan possible by hand. Increases the cyclic rate50 to 100%.Feed Kit 30 & 32 Cal. up to .60 longFeed Kit 9mm - .365 Dia. up to .46 longFeed Kit 9mm - .365 Dia., .46 - .60 longFeed Kit 9mm - .365 Dia., .60 - .75 longFeed Kit 40 - .44 Cal. up to .65 longFeed Kit 40 - .44 Cal., .65 - .80 longFeed Kit 45 Cal. up to .67 longFeed Die and fingers 9mm/365

Limited Deluxe ColletProduction Collet Rifle Neck Factory CaseRGB Pacesetter Pacesetter Die Die Sizing Crimp LengthCaliber Dies Dies & Dies & Set & Set & Die Die Gaugeshellholder shellholder shellholder shellholder$16.91 $25.37 $27.49 $26.78 $31.01 $18.32 $10.56 $3.88$26.60* $26.78*$27.49**17 Remington — — 006-90770 006-90804 — — — —204 Ruger — — 006-90417* 006-90734 — — — —22 Hornet — — 006-90500 006-90705 006-90599 — 006-90829 006-90111218 Bee — — 006-90753 — — — 006-90830 —22 PPC — — — 006-90803 — — — —221 Fireball — — — — — — — 006-90112222 Remington 006-90870 006-90501 — 006-90706 — — 006-90816 006-90113223 Remington 006-90871 006-90502 — 006-90707 006-90604 006-90954 006-90817 006-90114223 WSSM — — 006-90446 — — — — —22/250 006-90872 006-90503 — 006-90708 006-90606 006-90955 006-90818 006-90116220 Swift — — 006-90542 006-90702 006-90609 — 006-90831 006-90118243 Winchester 006-90873 006-90504 — 006-90709 006-90610 006-90956 006-90819 006-90119243 WSSM — — 006-90990 — — — 006-90187 —6mm PPC — — 006-90796 006-90802 — — — —6mm Remington — — 006-90540 006-90710 — — 006-90832 006-9012025/20 — — 006-90750 — — — 006-90833 006-9012125/35 — — 006-90778 — — — — —250 Savage — — 006-90550 — — — 006-90834 006-90122257 Roberts — — 006-90551 006-90703 — — 006-90835 006-90123260 Remington — — 006-90298 006-90974 — — 006-90977 —25/06 Remington — — 006-90536 006-90711 006-90605 006-90957 006-90836 006-90124264 Win Mag — — 006-90774 — — — — —6.5 Carcano — — 006-90749 — — — — —6.5 Japanese — — 006-90730 — — — — —6.5 Rem Mag — — 006-90773 — — — — —6.5x55 Mauser 006-90874 006-90627 — 006-90712 006-90611 — 006-90837 006-90126270 Win Short Mag — — 006-90572 — — — — —270 Weatherby — — — — — — — —270 Winchester 006-90875 006-90505 — 006-90713 006-90612 006-90958 006-90820 006-901287mm BR — — — — — — — —7mm TCU — — — — — — — —7/30 Waters — — 006-90748 — — — 006-90838 —7x57 Mauser — — 006-90541 006-90714 — — 006-90839 006-901307x64 Brenneke — — 006-90771 — — — — 006-902367mm/08 — — 006-90537 006-90723 — — 006-90840 006-901677mm Exp/280 Rem — — 006-90552 006-90724 — — 006-90841 006-901667mm Win Short Mag — — 006-90573 — — — — —7mm Rem Mag 006-90876 006-90538 — — 006-90613 — 006-90821 006-901317mm STW — — 006-90678** — — — 006-90869 —7mm Ultra Mag — — 006-90979 — — — — —284 Winchester — — 006-90777 — — — — 006-901297mm Weatherby — — — — — — — —7.5x55 Swiss — — 006-90767 — — 006-90186* 006-90184* 006-901327.62x39 Russian 006-90877 006-90565 — 006-90701 — — 006-90827 006-901337.62x54 Russian — — 006-90731 — — — 006-90842 006-9014730 Herret — — — — — — — —30/40 Krag — — 006-90555 — — — 006-90843 006-9013730/30 Winchester 006-90878 006-90506 — 006-90716 006-90631 — 006-90822 006-90136303 Savage — — 006-90756 — — — — —308 Winchester 006-90879 006-90507 — 006-90718 006-90614 006-90959 006-90823 006-90139300 Win Short Mag — — 006-90942 006-90185 — — 006-90331 —300 Savage — — 006-90545 — — — 006-90844 006-9013830/06 006-90880 006-90508 — 006-90715 006-90615 006-90960 006-90824 006-90140300 Win Mag 006-90881 006-90539 — 006-90722 006-90616 006-90961 006-90825 006-90142300 H&H — — 006-90560 006-90726 — — — 006-90141300 Weatherby Mag — — 006-90558 006-90727 — — 006-90845 006-90143300 Ultra Mag — — 006-90698 — — — 006-90970 —7.65 Arg Mauser — — 006-90732 — — — 006-90846 006-901347.7 Jap — — 006-90733 — — — 006-90847 006-90115303 British 006-90882 006-90547 — — — — — 006-9014432-40 — — 006-90758 — — — — —32 Winchester — — 006-90757 — — — — —33 Winchester — — 006-90759 — — — — —8x57 Mauser 006-90883 006-90544 — 006-90719 — — 006-90848 006-901488mm Lebel — — 006-90768 — — — — —338 Winchester — — 006-90546 006-90721 — — 006-90849 006-90149338 Ultra Mag — — 006-90927 — — — — —348 Winchester — — 006-90760 — — — — —350 Rem Mag — — 006-90776 — — — — —356 Winchester — — — — — — 006-90904 —35 Remington — — 006-90543 006-90728 — — 006-90828 006-9015035 Whelen — — 006-90752 — — — — 006-90972375 H&H — — 006-90559 006-90729 — — 006-90850 006-90164416 Remington — — 006-90805 — — — 006-90906 —32-20 — — — — — 006-90851 006-9014638-40 006-90761 — — — — 006-90852 —3 Die38-55 006-90762 — — — — 006-90853 —Sets With375 Winchester 006-90563 — — — — 006-90905 006-90165Powder40/65 006-90986* — — — — — —Through44/40 006-90564 — — — — 006-90854 006-90168444 MarlinExpanding006-90562 — — — — 006-90855 006-9015145/70 Government Die 006-90561 — — — — 006-90856 006-90152458 Win Mag 006-90800 — — — — 006-90969 006-9097182Lee Rifle DiesMore Dies Listed Online!!RGB (Really Great Buy) Series dies in the GREEN BOXare exactly the same dies as Lee's standard red box.These sets DO NOT have the factory crimp die, shellholder, powder dipper or load data. You get the 2 die setonly!!Pacesetter die sets include a conventional bullet seaterand roll crimper. You can choose the type of crimp youdesire. These dies are your best buy. Also includes ashell holder, powder dipper, load data and are packed ina great storage box.Deluxe Rifle 3 Die SetNo case lubrication reqired on neck sizer die! Reducesor eliminates case trimming, an increased case life up toten times! Unmatched speed! Truly Deluxe! Includesneck sizing die, dead length bullet seater, full length sizingdieIncludes Free Shell Holder.RGB DiesPacesetter DiesLimited ProductionPacesetter DiesThe same features and quality of the standard dies, Theprice is slightly higher because production quantities arelower. These include Shellholder, Powder Dipper & LoadData. (*Notes that Lee Factory Crimp Die is NOT included.)Collet Die SetThese dies size only the case neck to hold the bullet andare only suitable for bolt action guns that the case hasalready been fired in or for neck sizing new brass. Thedie set includes its own instructions with load data, powderdipper and shell holder.Very Limited Production2 Die Sets22/250 Ackley Improved223 Ackley Improved6mm/284 Winchester325 Win Short MagLee Die Boxes - The perfect storage for dies assembledin a turret. Made of tough, durable plastic. NEW! 4 DieBreech Lock Box!Lee Round Die Box OnlyFlat 2-Die BoxFlat 4-Die BoxOrder No.006-90980006-90981006-90984006-90923Order No.006-90535006-90078006-90422Price$30.3130.3130.3127.49Price$3.172.813.13Lock Rings (3 per pack) - No toolsneeded to lock in place and oncelocked, they stay put. Yet, they readjustvery easily without tools.Order No. 006-90534 $2.81

LEE Pistol DiesDeluxe Powder Carbide BulletPistol Carbide Steel Carbide Through Taper Factory SeatCaliber Die Set & 3 Die Set & 3 Die Set & Sizing Expanding Crimp Crimp & Feedshellholder shellholder shellholder Die Die Die Die Die$39.48 $28.19 $25.37 $19.73 $9.86 $9.15 $10.56* $8.45$37.36* $16.21Lee Pistol Dies25 ACP — 006-90568 — — — — — —30 M1 Carbine — 006-90626* — — — — 006-90421* —30 Luger — — 006-90754 — — — — —30 Mauser — — 006-90755 — — — — —7.62 Tokarev — — 006-90769 — — — — —32 ACP — 006-90622 — 006-90621 — — — —32 S&W — 006-90696 — — — — — —32 S&W Long — 006-90624 — 006-90621 — 006-90779 — —32 H&R Mag — 006-90809 — 006-90621 — — — —32/20 — — 006-90751 — — — — —9mm Mak — 006-90176 — — — — — —9mm Luger 006-90963 006-90509 — 006-90548 006-90580 006-90780 006-90860 —357 Sig — — 006-90270 — — — — —38 Short/Long Colt — 006-90276 — — — — — —38 Colt New Police — — — 006-90619 — — — —38 Super/38 ACP — 006-90623 — 006-90619 — — 006-90866 —380 Auto — 006-90625 — 006-90618 — — — —38 S&W — — — 006-90619 — — — —38 Special 006-90964 006-90510 — 006-90530 006-90581 006-90781 006-90861 —357 Magnum — 006-90511 — 006-90530 006-90582 — 006-90861 ---40 S&W 006-90965 006-90799 — — 006-90620 006-90782 006-90862 —10mm — 006-90566 — — — 006-90782 006-90862 —41 Act Express — — — 006-90629 — — — —41 Mag — 006-90628 — — — — 006-90416 —44 Special 006-90966 006-90516 — 006-90531 006-90583 006-90784 006-90863 —44 Mag — 006-90512 — 006-90531 006-90584 006-90784 006-90863 ---44 Russian — 006-90293 — 006-90531 — — 006-90863 —45 Colt 006-90967 006-90514 — — 006-90586 — 006-90865 ---45 ACP 006-90968 006-90513 — 006-90532 006-90585 006-90785 006-90864 —45 Auto Rim — 006-90808 — 006-90532 006-90585 006-90785 006-90864 —45 Schofield — 006-90323 — 006-90532 — 006-90785 006-90864 —400 Cor Bon — — 006-90430 — — — — —455 Web Mark II — 006-90764 — — — 006-90785 006-90865 —45 Win Mag — 006-90810 — 006-90532 006-90585 006-90785 006-90864 —454 Casull — 006-90795 — — — 006-90786 006-90865 —45 HP Italian — — — 006-90532 — 006-90785 006-90864 —460 S&W — 006-90344 — — — — — —480 Ruger — 006-90499 — — — — — —50 Action Express — — 006-90329 — — — — —500 S&W — 006-90288 — — — — — —Lock RingsUniversal Charging DieUniversal CaseExpanding DieLEE Breech Lock ClassicCast Press - Based on theproven design of the ClassicCast, the new Breech Lockseries adds the quickchangedie bushing.Includes [1] Breech LockQuick Change die insertOrder No.006-90999 $98.28Miscellaneous Dies and AccessoriesDie BoxesUniversal Case Expanding DieUniversal Charging DiesRifle Charging Die (ChargesThru Top of Die)Decapping DieLock Rings (3 per pack)Lee Round Die Box OnlyFlat 2-Die BoxFlat 4-Die Box (Fits dies with Breech Lock)Lee Bench Plate -Includes 3 base blocks;one drilled to fit all currentLee presses. Bolt hardwareincluded. Quicklyand securely mounts toany bench or tabletop.Order No.006-90251 $20.46Order No.006-90798006-90273006-90194006-90292006-90534006-90535006-90078006-90422Lock-RingEliminator -(2ea) Breechlock quickchange bushingswith integral lockcollar.Order No.006-90063 $10.58Lee Bulge Buster Kit -Assure your mixed brass isbulge free! With the LeeFactory Crimp Die, theBulge Buster will repair allthese rimless cases:Price$11.2718.329.159.152.813.172.813.13380 ACP, 40 S&W, 45 ACP, 45 WinMag, 10 mm, 41 AE, 45 GAPOrder No. 006-90487 $14.09Deluxe Pistol Die SetThe Lee Deluxe Pistol Die set Combines the world’smost popular carbide three-die set with the Lee FactoryCrimp die at a spectacular price. Includes Shell Holder.Carbide 3 Die SetsIncludes powder through expanding die, seating die, sizingdie, load data, powder dipper and shell holder. Withcarbide dies, no case lube required.Steel 3 Die SetsLee Steel 3-Die Sets have the same features as the carbidesets, except the case must be lubricated.Powder Through Expanding DieWhile expanding the case with a perfect flare, you cancharge the case through the hollow expanding plug.Includes a powder funnel adapter. This die is also usedwith the Auto Disk Powder Measure for automatic casecharging.Bullet Seat and Feed DiesFour tube magazines keeps Lee Bullet Feeders fed witha continuous supply of bullets. Listed on the chart.Sharp Shoot R Royal Case &Die Lube - Specific for lubrication, resizing and case forming.This new product is ananswer to easy and clean applicationof a case lubricants. Thisexciting new product is easier touse with no messy clean-up.. Ithas no complicated method ofapplication. Leaves behind aprotective coating that preventscorrosion. This coating will notattract grit, grime, or dust.Order No.4oz Jar 216-RLJ004 $6.32LeeReloading StandPerfect for the reloader with limitedworking space, an overwhelmedworkbench, or someone looking forsolution to portable reloadingneeds. The sturdy powder coatedsteel stand places your press at theperfect counter stool or standingheight. The 10 inch triangular steeltop plate uses the Patented quickchange Lee Bench Plate system.Order No.006-90688More information andaccessories on page 229Notes: Comes with one storage binand bracket, top plate, intermediateshelf, drilled wood bench block, completefastener set and two steel concreteblock hangers.83

These hardened steel shell holders fit Lee, RCBS, Lyman and most other brands ofpresses. They will not fit Lee Hand Auto-PrimersHOLDER4773263104444210222222224226232552231052525222Order No.006-90518006-90519006-90520006-90521006-90522006-90523006-90524006-90525RIFLE17 Rem.22 Hornet22K Hornet22 Savage22 BR218 Bee219 Zipper220 Swift221 Fireball222 Rem.222 Rem. Mag.223 (5.56mm)224 Clark (22/257)225 Win.22/250240 Weatherby243 Win.6mm Rem.224 Rem.6mm Int'l6mm/2846mm/066x47 (6mm/222M)25/28425/0625/20 Win.250 Savage25/35257 Roberts257 Weatherby303/256.5mm066.5mmx576.5x55 Mauser6.5 Jap6.5 Rem. Mag.6.5 Carcano264 Win. Mag.270 Win.270 Weatherby280 Rem.7mm/087x57mm MauserLee Standard Shell HoldersSize #R1R2R3R4R5R6R7R8Lee Standard Shell Holders - NOTE: THESE SINGLESHELL HOLDERS LISTED HERE ARE STANDARD PRESSSHELL HOLDERS. Standard press shell holders will not workwith Lee Auto-Prime. You must order shell holders for both ifyou plan to use both!!HOLDER555237312163322525555523363222517855825252535514Order No.006-90526006-90527006-90528006-90529006-90199006-90001006-90002006-90003006-90004Standard Shell Holder SetRIFLE7x61 Sharpe & Hart7mm Rem. Magnum7mm Weatherby284 Win.7.5mm Schmidt-Rubin30 M1 Carbine7.62x53 Arg. Mauser7.62mmx397.62mmx54 Russian30 Herrett30/30 Win. (30 W.C.F)300 Savage308 Win. (7.62 NATO)30/40 Krag (30 U.S.)30/06 Springfield300 H&H300 Weatherby300 Win. Mag.308 Norma Mag.303 British7.7 Jap.32 Win. Spc'l.32 Win. S.L.32/20 (32 W.C.F)32/40 Win.8x57 Mauser8mm 068mm Man. Schoe.8mm Rem. Mag.8mm Lebel33 Win.338 Win. Mag.340 Weatherby348 Win.35 Rem.35 Win.35 Whelen350 Rem. Mag.358 Win.358 Norma Mag.375 Win.375 H&H375 Weatherby38/40 WinSize #R9R10R11R12R13R14R15R16R19Price$2.81A set of 11 shell holders, packed in a sturdy plasticbox, fits over 120 different cartridges. (Shell holders1,2,3,4,5,7,8,9,10,11,19)Shell Holder Set for Std. presses (in green box)Order No.006-90197 $25.03Red plastic box without shell holdersOrder No.006-90196 $2.81HOLDER38318141185HOLDER1119&619&6111121919119&69111111221151213115119&619&644447B74419&6RIFLE38/55 Win.40/82 Win.408 Win.43 Mauser44/40444 Marlin45/70 Gov't458 Win. Mag.PISTOL38 S&W38 Colt N.P.38 Super Auto38 ACP38 Short Colt38 Long Colt38 Special357 Magnum357 Auto Mag.40 S&W10mm Auto41 Long Colt41 Action Express41 Magnum44 S&W Spc'l44 S&W Russian44 Magnum44 Auto Mag.45 Auto45 Colt455 WebleyPPC45 Auto Rim22 Rem. Jet25ACP256 Win. Mag.30 Luger30 Mauser32 Short Colt32 Long Colt32 S&W32 S&W Long32 ACP (Universal)32 ACP (Auto-Prime)32 Colt N.P.380 Auto9mm LugerSHELL HOLDERR13fits 45 Auto Rimonly!!WARNING: Users have reported that the primers in the tray of an auto prime can explode for variousreasons, some of which include: a cocked primer, or an attempt to prime a case which has aprimer already in place, or more than one primer on the punch, or priming a military case with thecrimp not completely removed. Should an explosion occur, tests have demonstrated that safetyglasses will normally prevent serious injury to the user if CCI or Winchester primers are used,because the explosion is minimal. Other primers, however can explode with sufficient force to seriouslyinjure the user, or persons nearby. Lee Precision does not take any position with respect tothe quality or performance of primers available on the market. However, only those primers manufacturedby CCI and Winchester are recommended for use in the Lee Auto Prime, and whenloading those primers, safety glasses should always be used. No other primers should be usedwith the Lee Auto Prime.IncludesLg and SmPrimer TraysLee Auto Prime and Improved Priming Tool Shell Holders - THESE SHELLHOLDERS FIT LEE PRIMING TOOLS # 006-90230, AND 006-90231 ONLY. THEYDO NOT FIT LEE, RCBS, LYMAN, OR ANY OTHER PRESSES!!!!HOLDER477326310444421022222222422623255223105221525222555Order No.006-90201006-90202006-90203006-90204006-90205006-90206006-90207RIFLE17 Rem.22 Hornet22K Hornet22 Savage22 BR218 Bee219 Zipper220 Swift221 Fireball222 Rem.222 Rem. Magnum223 (5.56mm)224 Clark (22/257)225 Win.22/250240 Weatherby243 Win.6mm Rem.244 Rem.6mm Int'l6mm/2846mm/066x47 (6mm/222M)25/28425/0625/20 Win.250 Savage25/35257 Roberts257 Weatherby303/256.5mm 066.5mm x 576.5 x 55 Mauser6.5 Jap6.5 Rem. Magnum6.5 Carcano6.8 SPC264 Win. Magnum270 Win.270 Weatherby380 Rem.7mm/087 x57mm Mauser7x61 Sharpe & Hart7mm Re. Magnum7mm WeatherbySize #12345672373121633225255555233632225178558252525355143831814118Order No.006-90208006-90209006-90210006-90211006-90212006-90213006-90272284 Win.7.5mm Schmidt-Rubin30 M1 Carbine7.62x53 Arg. Mauser7.62mm x 397.62x54 Russian30 Herrett30/30 Win. (20 W.C.F)300 Savage308 Win. (7.62 NATO)30/40 Krag (30 U.S.)30/06 Springfield300 H&H300 Weatherby300 Win. Mag.308 Norma Mag.303 British7.7 Jap.32 Win. Spc'l32 Win. S.L.32/20 (32 W.C.F)32/40 Win.8x57 Mauser8mm068mm Man. Schoe8m Rem. Mag.8mm Lebel33 Win.338 Win. Mag.340 Weatherby348 Win.35 Rem.35 Win.35 Whelan350 Rem. Mag.358 Win.358 Norma Mag375 Win.375 H&H375 Weatherby38/40 Win.38/55 Win.40/82 Win.408 Win.43 Mauser44/40444 Marlin45/750 Gov't.Size #891011121314Auto Prime Shell Holder SetShell Holder Set for Lee Auto-Prime(in red box)Red plastic box without shell holdersLee Auto Primeand Shell HoldersLee Auto-Prime XR -- Square primer trays accept all brands ofprimer boxes.- New Elevator pin safely separates a singleprimer and presents it for priming- Unbreakable comfort curve leverOrder No. 006-90230 $17.05HOLDER5115119&619&644447b74419&61119&619&6111121919119&69111111221151213Order No.006-90017006-90200006-90023006-90020006-90031PISTOL458 Win. Mag.22 Rem. Jet25 ACP256 Win. Mag.30 Luger30 Mauser32 Short Colt32 Long colt32 S&W32 S&W Long32 ACP (Universal)32 ACP (Auto-Prime)32 Colt N.P.380 Auto9mm LUGER38 S&W38 Colt N.P.38 Super Auto38 ACP38 Short Colt38 Long Colt38 Special357 Magnum357 Auto Mag.40 S&W10mm Auto41 Long Colt41 Action Express41 Magnum44 S&W Spc'l44 S&W Russian44 Magnum44 Auto Mag.45 Auto45 Colt455 WebleyPPC45 Auto RimSize #1516192021AUTO PRIME SHELL HOLDERSPrice $2.10Auto Prime Shell Holder Set- A set of 11 shell holders, packedin a sturdy plastic box, fits over 120 different cartridges.(Shellholders1,2,3,4,5,7,8,9,10,11,19)Order No.006-90198006-90196Price$14.092.81Lee Ram Prime - Ram Prime primes on the press upstroke fora more sensitive feel. Includes easy to change punches forboth large and small primers. Fits all brands of presses. USESSTANDARD PRESS SHELL HOLDERS.Order No. 006-90106 $9.8684

Order Cutter, Holders, Gauges andchamfer separately below.Lee ZipTrim Power HeadSpinner Stud(for use with the 3-jaw chuck/ convertselectric drill into high speed polisher/latheThe Lee Case Trimmer - The simplest way tocheck the case and trim to the correct safelength. The Cutter and Lock Stud works for allcalibers. You only need one. The Case LengthGauge (Pilot) and Shell Holder must beordered for each caliber. Use with an elecrtricdrill to trim, chamfer and polish cases fast.Order No.006-90111006-90225006-90112006-90113006-90114006-90673006-90115006-90116006-90118006-90119006-90389006-90120006-90121006-90122006-90123006-90124006-90221006-90993006-90219006-90126006-90043006-90223006-90189006-90128006-90117006-90129006-90130Caliber22 Hornet218 Bee221 Fireball222 Remington223 Remington223 WSSM7.7 Japanese22/250220 Swift243 Winchester243 WSSM6mm/224Rem25/20 W.C.F.250 Savage257 Roberts25/06 Rem25 WSSM260 Rem5.7x28FN6.5x55 Mauser6.5 Carcano6.5/2846.8 Rem SPC270 Win270 WSM284 Win7x57 MauserDecapper and Base - Easily removes crimped in primers from military cases.Guaranteed unbreakable. Should it fail, simply return to the factory for a free replacement.Available for .22 and .30 cal only! $4.22ea.22 Cal. Decap/Base.30 Cal. Decap/BaseLee Case ConditioningOrder No.006-90103006-90102Lee ZipTrim - The ZipTrim rotates your case like alathe. While your case is mounted you can quicklytrim, chamfer and polish your case. The ZipTrimpower head features a steel spindle that rotates in ahousing made of tough nylon.Order No.006-90167006-90166006-90131006-90314006-90132006-90051006-90133006-90147006-90236006-90134006-90135006-90136006-90137006-90138006-90139006-90140006-90141006-90142006-90034006-90143006-90144006-90218006-90146006-90222006-90148006-90149006-90150The spindle is rotated by a recoil mechanismthat puts over a 1/4 horsepower and1,700 rpm at your fingertips!Use the Zip Trim with your Lee Caselength gauge and cutter. Also works greatwith the chamfer tool (order separatelybelow)Order No.006-90899006-90607The 3-Jaw Chuck - Also available to use with your Zip Trim.Versatile chuck will hold the tiny 25 ACP case to the giant 460 WbyMag and everything in between! Order No. 006-90608 $11.27Order No006-90972006-90165006-90164006-90151006-90152006-90169006-90153006-90684006-90155006-90156006-90157006-90217006-90158006-90127006-90154006-90159006-90160006-90161006-90168006-90162006-90163006-90224006-90992006-90971006-90220006-90018006-90010006-90019Price$17.622.81Cutter & Lock Stud- Cutter and Lock Stud fits allcalibers, you only need to order one of these. Thecase length gauge (pilot) and shell holder comes asa set. Order these from the list below. Fits only thecalibers listed! Order No. 006-90110 $4.92Case Length Gauge (Pilot) and Shell Holder - Must be ordered asCase Length Gauge and shell holder for each caliber. See below forproduct numbers. $3.88 eaCaliber7mm/087mm Exp280 Rem7mm Rem Mag7mm WSM7.5 Swiss (S-R)7.5 MAS7.62x39 Russian7.62x54 Russian7.62 Brenneke7.65 Mauser30 M1 Carbine30/30 Winchester30/40 Krag300 Savage308 Win30/06 Spgfd300 H&H300 Win. Mag.300 WSM300 Wby Mag.303 British338 Federal32/20 W.C.F325 WSSM8x57 Mauser338 Win Mag35 RemingtonLee Chamfer Tool- Must be used after case trimming. Unique design cutsfast without chatter. One turn does the job. Chamfers and deburrs insideand outside of case neck. Can also be used to remove the crimp fromprimer pockets of G.I. brass. Order No. 006-90109 $2.10Caliber35 Whelen375 Win375 H&H444 Marlin45/70 Govt32 S&WLong9mm Luger9mm Mak380 Auto38 S&W38 Special38 Super357 Mag10mm Auto40 S&W41 Magnum44 Special44 Magnum44/4045 ACP45 Colt45 GAP454 Casull458 Win Mag460 S&W Mag480 Ruger50 BMG $14.10500 S&WPrimer Pocket Cleaner - Double Ended design cleans both largeand small primer pockets. Primers can be fully seated for betteraccuracy and safety. Costs so little and works so well, no reloadercan afford to be without one! Order No. 006-90101 $1.40Lee Safety Scale - This is the onlyscale that can never get out of adjustment.The beam is made from a verytough phenolic. Even if dropped youcan feel confident that if it did notbreak it is still accurate. Sensitive andreadable to 1/20 grain.Order No. 006-90681 $22.51Lee Powder Handling ToolsPerfect Powder Measure - Almost as good as a scale! ThePerfect Powder Measure has a micrometer adjuster that readsdirectly in cubic centimeters. Works for charges from two grains toover 100 grains. Changing powder is fast and easy. Free sturdysteel stand included with each measure. The valve is also a powderbaffle, so accuracy is virtually guaranteed!Order No. 006-90058 $21.85Lee Powder Measure Kit - Fifteen uniformlygraduated and proportioned powder dippers.Slide card shows the grains of powder eachmeasure will dispense of every type of powder.Powder measures are inherently safe as theycannot get out of adjustment. Perfect forreloaders who load in small quantities.Order No. 006-90100 $9.15Lee Powder Funnel - A large, unbreakable funnel that fits all casesfrom .22 to .45 caliber. Hole in flange permits mounting to the LeeTurret Press, shelf or bench. Order No. 006-90190 $2.47Lee Auto-Disk Powder Measure - Use the Auto Disc PowderMeasure in conjunction with your Lee Powder Through ExpandingDie! Each Auto Disk measure comes complete with four chargesdisks containing six cavities each. A total of 24 cavities! Charges from2 to 24 grains. Disks are changed in seconds. They slide rightthrough when the measure is raised. Order No. 006-90578 $23.19Double Disk Kit - This kit raises the hopper so you can stack twodisks. This not only doubles the capacity of the disks but it makesvery fine adjustments possible. Most powders can be adjusted up ordown .1 grain with different combinations of disks. Complete listingof combinations, 4 extra disks, screws and risers are included.Order No. 006-90195 $10.56Micro Disk - Accurately measures small charges below the rangeof the standard Auto-Disk Powder Measure. Six cavities range from1.1 to 2.5 grains of Bullseye. This is an ideal kit for small calibercases and light target loads. Order No. 006-90302 $6.94Pro Auto-Disk Powder Measure - Automatically charges your casewhile expanding the case mouth. Elastomer wiper and the teflon coatedmetal casing make this the smoothest operating measure ever.The large hopper with shut off valve is attached with brass thumb nutsfor the ultimate in disk changing convenience. Includes a swiveladapter which screws into your die without rotating the measure. Alsocomes with pull back lever. A set of 4 disks with 24 cavities included.Order No. 006-90429 $35.49Pro Auto-Disk Update Kit - Update any Lee Auto-DiskPowder Measure with all the PRO features. Includes oversizehopper and valve assembly with elastomer wiper, swiveladapter assembly for fast and easy transfer between diesets, pullback lever, chain and attachments and adjustableCharge Bar. Order No. 006-90377 $16.21Pull Back Lever & Chain - For progressive reloading.Eliminates the possibility of powder binding and reducesmissed or double charges from operator error.Order No. 006-90479 $2.10Swivel Adapter - Fast and easy transfer between die sets.Screws into your die without rotating the measure.Order No. 006-90477 $4.22Adjustable Charge Bar - Infinitely adjustable between .28and 1.6 cc. Lifetime nylon with solid brass, zero backlashmicrometer. Easy to set. Order No. 006-90792 $7.0485

Rock Chucker Supreme Master Kit - Our Top Selling Kit! The Rock Chucker SupremeMaster Reloading Kit comes with everything a beginner or expert needs to start reloadingexcept dies, brass, bullets, primers and powder!New!Order No. PriceAuto Prime!RockChucker Supreme Reloading KitRockChucker Supreme Press OnlyAutomatic Primer Feed ComboPrimer Catcher AssemblyPrimer Plug & Sleeve (large)Primer Plug & Sleeve (small)Universal Primer ArmNew! Rockchucker Supreme Auto PrimeRCBS Presses and Accessories044-9357 320.94044-9356 143.59044-9580 24.85044-9114 7.43044-9552 3.48044-9553 3.48044-9550 12.41044-9358 38.68100 PrimerCapacityEach Master Kit includes a Rock ChuckerPress, 505 Reloading Scale, Speer ReloadingManual, Uniflow Powder Measure, Hex KeySet, Case Lube Kit, Powder Funnel, DeburringTool, Case Loading Block, Primer Tray-2 Youmust order dies and shell holders separately!Piggyback IV Conversion Unit - Moves you from single-stage reloadingto 5-station, manual indexing, progressive reloading in one step.Increases your output from 50 rounds an hour to well over 400. Reloadsall pistol (except 25 Auto) and rifle calibers up to 30-06 (3.340" OAL) .Five stations allow use of lube die, lock-out die, powder checker, or separatecrimp die. Interchangeable die plate for fast and simple caliber conversion.Utilizes APS(r) Priming System, the most reliable, convenientand safest available. Self-cleaning Shell Plate Holder. Includes bullettray, loaded cartridge box and empty case box.Order No. 044-87811 $391.76Ammomaster/Piggyback Die Plate - Switchtop plates quickly and eliminate the need toremove and readjust dies when making a caliberchangeover for your Ammo-Master or PiggyBack. Includes afive-station top plate, clutch bearing with bushing, cam wire clipwith lock nut, and set screw. Order No. 044-88799 $33.91Reloader Special-5 - One of the trulyremarkable values in reloading. It haseverything you need to get started reloadingrifle and pistol (except dies and shellholders.)The Reloader Special-5 Kit contains:Reloader Special-5 press, 5-0-5 Scale,Case Loading Block, Case Lube Kit, PrimerTray-2, Powder Funnel, Deburring Tool, andSpeer Reloading Manual.Reloader Special-5 KitReloader Special-5 Press OnlyNew! RCBS Precision Handloading DVD - Comprehensive reviewof RCBS equipment and accessories. Tips and tricks on how to safelyand efficiently load a high volume of rounds. Clear, step-by-stepdirections for shotgun, rifle and pistol reloading. Narration by JimScoutten of Shooting USA® Order No. 044-99910 $8.43Partner Press - RCBS's Smallestpress, size and price wise. Perfect forbeginners or experienced handloaderswho want a separate press to handle differentfunctions or calibers. The PartnerPress Kit includes: the Partner Press,Case Loading Block, Case Lube Kit,Primer Tray, Deburring Tool, PowderFunnel, Speer Reloading Manual andthe RC-130 Scale. The easiest way toget started reloading!Partner Press OnlyPartner Press Reloading KitDust CoverOrder No.044-9045044-9285Price$280.61123.58Order No. Price044-87460 $72.12044-87466 182.11044-86881 9.73RCBS® Pro 2000 Progressive Press - Easy-to-use progressive press.It offers simple to use five station manual indexing. It’s like having anammo factory right on your bench! Each pull of the handle produces aperfectly loaded round. All you have to do is insert the bullet and caseand rotate the shell plate by hand. Great for short pistol and long riflecases. Cast iron frame & removable die plate.The Pro 2000 is built tolast and carries a Full Lifetime Warranty!Pro 2000 Progressive PressPro 2000 Die PlatePro 2000 Star WheelTube Priming Conversion KitDust CoverOrder No.044-88875044-88877044-88878044-88876044-86767RCBS® Turret Press - Simple operation – nocomplex or automated processes. You havecomplete control over every reloading step.May be operated in progressive or singlestagemode. In the progressive mode,output can be increased from 50 to200 rounds per hour. Rugged, castiron frame, toggle block and 6 stationturret head.Order No. 044-88901 $219.39Turret Deluxe Reloading Kit -Turret Press includes: RCBS® Turret Press,Uniflow Powder Measure, Model 5-0-2Reloading Scale, Speer Manual #14, Case LubeKit, Deburring Tool, Case Loading Block. FoldupHex Key Wrench Set, Primer Tray-2, PowderFunnel. Order No. 044-88906 $431.06Price$518.9217.336.47105.6416.09RCBS® Pro 2000 Deluxe Kit - Pro 2000 ProgressivePress, Trim Pro Manual Case Trimmer Kit, SpeerReloading Manual, Deburring Tool, Fold-up Hex KeyWrench, Stainless Steel Dial Caliper, Micro Pro ElectronicScale, Case Lube Kit. Order No. 044-88880 $934.03Spare Turret Head - Makes changing calibers quick and simple.Leave the dies set up in the Turret Head and change the Head – onebolt does the trick! Six stations with standard 7/8" - 14 threads.Order No. 044-88902 $44.50AmmoMaster®-2 Single Stage Press - In single stage mode, you haveall the clearance and leverage to handle any rifle or pistol round from 25Auto to 50 BMG. The Ammomaster is designed for use with standard7/-14 thread loading dies and accessories. It easily converts for use of.50 BMG dies with the optional .50 BMG Pack.AmmoMaster®-2 PressAmmomaster Die Plate50 BMG Kit for 1 1/2” diesDust Cover50 BMG Shell HolderOrder No.044-88703044-88799044-88709044-86767044-88746Price$270.8933.91127.4816.0919.73AmmoMaster® .50 BMG Pack - The AmmoMaster® .50 BMGPack makes reloading for the .50 Browning Machine Gun cartridgea simple task. Manufactured to accept RCBS® 1 1/2” .50BMG dies, along with the massive 1” solid steel ram,provides more than enough strength to handle the.50 and will provide a lifetime of service.This kit includes the press, Full-Length sizer,Seater die, Shell Holder, Ram Priming Unitand Trim die. Order No. 044-88700 $589.29Increase from 50 to200 rounds per hourin progressive mode!86

GROUP A Full Length Full Length Neck Neck Small Base Small Base Seater Exp-Decap TrimCaliber Die Set Size Die Die Set Sizer Die Die Set Sizer Die Die Unit Die$28.55 $28.32 $34.84 $28.56 $34.84 $28.56 $24.04 $6.52 $33.15$52.79* $25.80* $37.24* $37.03* $37.24* $51.83* $7.07* $31.02*$42.77** $53.27** $30.53** $53.27** $37.03**$34.84+ $34.65+ $67.14+ $37.24+$37.24^$30.53^17 Remington 044-17201 044-17229 044-17202 044-17230 — — 044-17238 044-9882* 044-17265204 Ruger 044-10301 — 044-10302 044-10330 — — — 044-9801* —218 Bee 044-10001 044-10029 044-10002* 044-10030* — — 044-10038 044-9802 044-1006522 Hornet 044-10201 044-10229 044-10202* 044-10230 — — 044-10238 044-9802 044-1026522-250 (22 Varminter) 044-10601 044-10629 044-10602 044-10630 044-10603** 044-10631** 044-10638 044-9802 044-10665220 Swift 044-10701 044-10729 044-10702* 044-10730 — — 044-10738 044-9802 044-10765221 Remington Fire Ball 044-10801 044-10829 044-10802* 044-10830** — — 044-10838 044-9802 044-10865222 Remington Magnum 044-11001 044-11029 044-11002* 044-11030** — — 044-11038 044-9802 044-11065222 Remington 044-10901 044-10929* 044-10902* 044-10930** — — 044-10938 044-9802 044-10965223 Remington (5.56mm) 044-11101 044-11129 044-11102 044-11130 044-11103 044-11131 044-11138 044-9802 044-11165223 WSSM 044-10501 — 044-10502* 044-10530** — — — 044-9802 —5.7mm x 28 (FN) 044-11701* 044-11729** — 044-11703+ 044-11731* 044-11738 044-9802 —240 Weatherby Magnum 044-33201 044-33229 044-33202* 044-33230** — — 044-33238 044-9805 044-332656mm PPC 044-22601 044-22629 044-22602* 044-22630** — — 044-22638 044-9837* 044-22665243 Winchester 044-11401 044-11429 044-11402 044-11430 044-11403 044-11431 044-11438 044-9805 044-11465243 WSSM 044-11601 — 044-11602* 044-11630** — — — 044-9805 —6mm Remington (244 Remington) 044-11501 044-11529 044-11502* 044-11530** 044-11503** 044-11531** 044-11538 044-9805 044-1156525-06 044-12001 044-12029 044-12002* 044-12030 — — 044-12038 044-9806 044-1206525 WSSM 044-12401 044-12429 044-12402 044-12430 — — 044-12438 044-9806 —25-20 Winchester 044-11801 044-11829 044-11802* 044-11830** — — 044-11838 044-9806 044-1186525-35 Winchester 044-12101 044-12129 044-12102* 044-12130** — — 044-12138 044-9806 044-12165250 Savage (250-3000 Savage) 044-12201 044-12229 — — — — 044-12238 044-9806 044-12265257 Roberts 044-12501 044-12529 044-12502** 044-12530* — — 044-12538 044-9806 044-12565257 Weatherby Magnum 044-12601 044-12629* 044-12602** 044-12630+ — — 044-12638 044-9806 044-12665260 Remington 044-12801 044-12829 044-12802* 044-12830 — — 044-12838 044-9807* 044-12865264 Winchester Magnum 044-12701 044-12729 044-12702** 044-12730* — — 044-12738 044-9807* 044-127656.5 x 55mm Swedish Mauser 044-13201 044-13229 044-13202* 044-13230 — — 044-13238 044-9807* 044-132656.8mm Remington Special 044-13301 044-13329 — — — — 044-13338 044-9808 —270 Weatherby Magnum 044-13401 044-13429 044-13402** 044-13430* — — 044-13438 044-9808 044-13465270 Winchester 044-13501 044-13529 044-13502* 044-13530 044-13503* 044-13531^ 044-13538 044-9808 044-13565270 Winchester Short Mag 044-31301 044-31329 044-31302** 044-31330* — — 044-31338 044-9808 044-31365280 Remington (7mm Exp. Rem.) 044-14001 044-14029 044-14002** 044-14030+ 044-14003** 044-14031** 044-14038 044-9809 044-14065284 Winchester** 044-14101 044-14129 044-14102* 044-14130** — — 044-14138 044-9809 044-141657mm Remington Magnum 044-13601 044-13629 044-13602+ 044-13630 044-13603 044-13631^ 044-13638 044-9809 044-136657mm Remington Short Ultra Magnum 044-31101 044-31129 044-31102** 044-31130* — — 044-31138 044-9809 044-311657mm Remington Ultra Magnum 044-17801 044-17829 044-17802* 044-17830** — — 044-17838 044-9809 044-178657mm Shooting Times Westerner 044-26601 044-26629 044-26602^ 044-26630** — — 044-26638 044-9809 044-266657mm Thompson/Center Ugalde 044-34201 044-34229 044-34202* 044-34230** — — 044-34238 044-9811* 044-342657mm Weatherby Magnum 044-13701 044-13729 044-13702^ 044-13730** — — 044-13738 044-9809 044-137657mm Winchester Short Mag 044-31401 044-31429 044-31402** 044-31430+ — 044-31403+ 044-31438 044-9809 044-314657mm-08 Remington 044-13901 044-13929 044-13902 044-13930 — — 044-13938 044-9809 044-139657 x 57mm Mauser (7mm Mauser) 044-13801 044-13829 044-13802* 044-13830 — — 044-13838 044-9809 044-138657 x 64mm Brenneke 044-34001 044-34029 044-34002** 044-34030* — — 044-34038 044-9809 044-340657-30 Waters 044-34801 044-34829 044-34802** 044-34830+ — — 044-34838 044-9809 044-348657.5 x 55mm Schmidt-Rubin (1911) 044-33501 044-33529 044-33502* 044-33530** — — 044-33538 044-9812 044-335657.62 x 54Rmm Russian 044-29001 044-29029 044-29002** 044-29030+ — — 044-29038 044-9812 044-290657.62 x 39mm-308/.311 044-35001 044-35029 — — — — 044-35038 044-9814 044-350657.65 x 53 Mauser (Belgian) 044-14301 044-14329 044-14302* 044-14330** — — 044-14338 044-9814 044-143657.7 x 58mm Japanese-Arisaka 044-14401 — 044-14402* 044-14430** — — 044-14438 044-9814 044-1446530 Luger (7.65mm Luger) 044-25001 044-25029 044-25002* 044-25030** — — 044-25038 044-9813* 044-2506530-06 Springfield 044-14801 044-14829 044-14802* 044-14830 044-14803 044-14831 044-14838 044-9812 044-1486530-30 Winchester 044-14601 044-14629 044-14602** 044-14630+ — — 044-14638 044-9812 044-1466530-378 Weatherby Magnum 044-29501 044-29529 044-29502* 044-29530** — — 044-29538 044-9812 044-2956530-40 Krag 044-14701 044-14729 — — — — 044-14738 044-9812 044-14765300 Remington Short Action Ultra Mag 044-31201 044-31229 044-31202** 044-31230* — — 044-31238 044-9812 044-31265300 Remington Ultra Mag 044-17601 044-17629 044-17602 044-17630** — — 044-17638 044-9812 044-17665300 Savage 044-15101 044-15129 — — 044-15103** 044-15131** 044-15138 044-9812 044-15165300 Weatherby Magnum 044-15201 044-15229 044-15202 044-15230 — — 044-15238 044-9812 044-15265300 Winchester Magnum 044-15301 044-15329 044-15302 044-15330 044-15303* 044-15331^ 044-15338 044-9812 044-15365300 Winchester Short Magnum 044-30801 044-30829 044-30802** 044-30830+ — — 044-30838 044-9812 044-30865*303 British 044-15401 044-15429 044-15402 044-15430 — — 044-15438 044-9814 044-15465308 Winchester/307 Winchester 044-15501 044-15529* 044-15502 044-15530 044-15503 044-15531 044-15538 044-9812 044-1556532 Winchester Special 044-15701 044-15729 — — — — 044-15738 044-9816* 044-15765325 Winchester Short Mag 044-31601 044-31629 044-31602* 044-31630** 044-31603** 044-31631** 044-31638 044-9817* 044-166658mm Remington Magnum 044-16001 044-16029 044-16002* 044-16030** — — 044-16038 044-9817* 044-160658 x 57mm Mauser (8mm Mauser) 044-15901 044-15929 044-15902* 044-15930 — — 044-15938 044-9817* 044-15965338-378 Weatherby Magnum 044-16801 044-16829 044-16802* 044-16830** — — 044-16838 044-9818* 044-16865338 Winchester Magnum 044-16301 044-16329 044-16302* 044-16330** 044-16303** 044-16331** 044-16338 044-9818* 044-16365338 Remington Ultra Mag 044-17701 044-17729 044-17702** 044-17730* — — 044-17738 044-9818* 044-17765338 Lapua (.416 Rigby case) 044-16601 044-16629 044-16602* — — — 044-16638 044-9818* 044-16665340 Weatherby Magnum 044-30601 044-30629 044-30602* 044-30630** — — 044-30638 044-9818* 044-3066535 Remington 044-16501 044-16529 — — — — 044-16538 044-9820* 044-1656535 Whelen 044-30701 044-30729 — — — — 044-30738 044-9823* 044-30765357 SIG 044-23101 044-23129 — — — — 044-23138 044-9834* 044-23165358 Winchester/.356 Winchester 044-32701 044-32729 — — — — 044-32738 044-9823* 044-327659.3 x 62mm Mauser 044-34501 044-34529* 044-34502* 044-34530** — — 044-34538 044-9821* 044-34565375 Holland & Holland Magnum 044-16901 044-16929 044-16902** 044-16930* — — 044-16938 044-9822* 044-16965375 Remington Ultra Mag 044-30901 044-30929 044-30902** 044-30930* — — 044-30938 044-9822* 044-30965RCBS 2-Die Sets Groups A & D2-Die Sets are for bottleneck type rifleand pistol cases, and consist of a Full-Length Sizer Die with Expander-Decapping Unit, and a Seater Die withBullet Seater Plug.Neck Die Sets Groups A & DNeck Sizer Dies size only the neck ofcase (not the shoulder or body) justenough to snugly hold the bullet. NeckDie Sets consist of a Neck Sizer Diewith Expander-Decapping Unit and aregular Seater Die with Seater Plug.Neck Sizer Dies are also availableindividually.Small Base Die Sets Group ASmall Base Sizer Dies are usuallyrequired for reloading ammunition tobe used in automatic, semi-automatic,pump, slide and some lever-actionrifles. These dies size the body ofcases somewhat smaller in diameterand also set the shoulder back slightlymore than a Full-Length Sizer Die toensure proper functioning in theactions of these rifles. Not recommendedfor ammunition used in boltactionrifles. Small Base Set containsSmall Base Sizer with Expander-Decapping Unit and Regular SeaterDie with Seater Plug. Small Base SizerDies also available individually.Tungsten Carbide Die Sets GroupsB, C, & E - The Carbide Sizer Die eliminatesthe need for case lubrication andcases do not need to be cleaned beforesizing. Carbide Die Sets consist of aCarbide Sizer Die with Decapping Unit,Expander Die for expanding and bellingthe case mouth, plus a Seater Die withRoll or Taper Crimp and Bullet SeaterPlug. Carbide Sizer Dies are also availableseparately.Trim Dies - Doubles as a visual caselength gauge. Run a case into the TrimDie and if the case sticks out above thetop of the die, it’s too long. File thecase down until it is flush with the topof the die. Then, deburr the casemouth with a Deburring Tool. Precisionmachined Sizer Die chamber withslightly larger neck to ensure accuracyin gauging case lengths. Headspace isheld to minimum tolerances to avoidchanging the length of the case. Heattreated to withstand a file bearingagainst the top surface without damageto die. Cases with an overalllength of 1.700” and shorter requiresthe use of an Extended Shell Holder.Standard 7/8”-14 thread. Packed in aconvenient plastic storage box.COMPETITION DIES Competition Competition Competition Competition Competition CompetitionFull Length Full Length Seater Extended Decapping Seater Plug BulletCaliber Die Set Sizer Die Die Shell Holder Pin Assembly Guide$104.88 $40.35 $68.08 $11.30 $2.11 $10.42 $6.61$98.13* $37.76* $63.70*204 Ruger 044-39401* 044-39429 044-39438* 044-38260 044-9608 — —22 Hornet 044-38301* 044-38329 044-38338 044-38262 044-9608 044-38151 044-38202222 Remington 044-37001 044-37029 044-37038 044-38260 044-9608 044-38151 044-38202223 Remington 044-37201* 044-37229* 044-37238* 044-38260 044-9608 044-38151 044-3820222-250 (22 Varminter) 044-37101* 044-37129 044-37138* 044-38253 044-9608 044-38151 044-38202243 Winchester 044-37301* 044-37329 044-37338 044-38253 044-9608 044-38152 044-382056.5 x 55mm Swedish Mauser 044-38401* 044-38429 044-38438 044-38252 044-9609 044-38154 044-38207270 Winchester 044-37501* 044-37529 044-37538 — 044-9609 044-38155 044-382087mm-08 Remington 044-37401 044-37429 044-37438 044-38253 044-9609 044-38156 044-382097mm Remington Magnum 044-37601* 044-37629 044-37638 — 044-9609 044-38156 044-382097.5mm x 55mm Schmidt-Rubin 044-38601* 044-38629 044-38638 — 044-9609 044-38157 044-3821230-06 Springfield 044-37701* 044-37729 044-37738 — 044-9609 044-38157 044-38212308 Winchester 044-37801* 044-37829 044-37838 044-38253 044-9609 044-38157 044-382128 x 57mm Mauser 044-38701* 044-38729 044-38738 — 044-9609 044-38159 044-38214+ Notes that The Competition Extended Shell Holder is IncludedCompetition Rifle Dies - These dies aren’t for everybody.They go above and beyond our Precision Dies. Ifyou’re a competitive marksman measuring success infractions of a millimeter, RCBS® Competition Dies are foryou. NOTE: Competition dies do not require neck bushings.•Full-length sizer with a raised expander ballallowing extra leverage for smooth, effortlessneck expansion•Maximum concentricity between die neckand body•Seater die with micrometer for super accuratebullet seating depth in increments of 0.001”•Bullet inserts through a side window insteadof bottom of die•Special bullet-seating guide ensures correctbullet alignment before and after seating.•Extended shell holder for shorter cartridges•Black oxide finish•Not for use with progressive reloading presses87

GROUP B 3-Die 3-Die Roll TaperCarbide Carbide 3-Die 3-Die Carbide Expander Crimp CrimpSet Set Set Set Sizer Die Seater SeaterRoll Taper Roll Taper Die Sizer $14.80 Die Die Decap TrimCaliber Crimp Crimp Crimp Crimp $36.29 Die $23.41* $18.24 $18.24 Unit Die$46.48 $46.48 $34.75 $34.75 $52.07* $20.61 $13.85+ $30.84* $30.84* $6.52 $33.81$74.28* $79.38* $33.96+ $19.50+ $18.24+ $31.63+$19.50^32 Automatic (RN)1 — 044-20015 — 044-20037 — 044-20053 044-20062^ 044-9622 044-2006532 S&W Long/32 H&R Mag (RN-SWC)2 044-21412* 044-21415* — — 044-21437** — 044-21453* 044-21442* 044-21462* 044-9622357 Magnum/38 Special/.357 Rem Maxi (RN-WC) 044-18212 044-18215 — — 044-18237+ — 044-18353 044-18342 044-18262 044-9622 18265/183659mm Luger (RN-TMJ) — 044-20515 — — 044-20537 — 044-20552 — 044-20562^ 044-9622 044-20565380 Automatic Pistol (RN) — 044-20415 — — 044-20437 — 044-20449 — 044-20462^ 044-9622 044-2046540 S&W/10mm Auto (SWC) — 044-22115 — — 044-22137 — 044-22153 — 044-22162 044-9622 044-22165+41 Magnum (RN-SWC) 044-18512 — — — 044-18537 — 044-18553 044-18542+ — 044-9622 044-1856544 Magnum/44 Special (RN-SWC) 044-18612 — 044-18608 — 044-18637+ 044-18732 044-18753+ 044-18742 044-18662+ 044-9622 18665/1876544-40 Winchester (44 Win) (RN) — — 044-18805 — — 044-18832 044-18853 044-18839+ — 044-9622 044-1886544-40 Winchester (RN) Jacketed 4 — — 044-18806 — — 044-18832 044-18853 044-18840+ — 044-9622 044-1886545 Automatic (45 ACP) (RN-SWC) — 044-18915 — — 044-18937+ 044-18953 044-18942 044-18962+ 044-9622 044-1896545 Colt (RN-SWC) 044-19112 — 044-19108 — 044-19137 044-19132 044-19153 044-19142 — 044-9622 044-19165454 Casull (SWC) 044-23212 — — — 044-23237 — 044-23253 044-23242+ — 044-9622 044-23265480 Ruger 044-35212 — 044-35208 — 044-35237 044-35232 — 044-35238+ — 044-9622 044-3526550 Action Express (SWC) — — — 044-22210 — 044-22232 044-22253 — 044-22262^ 044-9622 044-22265500 Smith & Wesson (Shell Plate/Holder #44) 044-23812 044-23808 — 044-23837 044-23832 044-23853 044-23838 — 044-9622 —GROUP C3-Die 3-Die RollCarbide Carbide 3-Die 3-Die Crimp TaperSet Set Set Set Carbide Seater CrimpRoll Taper Roll Taper Sizer Sizer Expander Die Seater Decap TrimCaliber Crimp Crimp Crimp Crimp Die Die Die $22.06 Die Unit Die$63.71 $41.62 $40.41 $51.79 $24.24 $17.10 $20.64* $22.06 $6.52 $33.1530 M1 Carbine (RN) — 044-18015 — 044-18010 044-18037 044-18032 044-18053 — 044-18062 044-9622 044-18065444 Marlin — — 044-20704 — — 044-20733 044-20758 044-20738 — 044-9619 044-2076545-70 U.S. Government — — 044-20904 — — 044-20933 044-20955 044-20938* — 044-9619 044-20965450 Marlin — — 044-35504 — — 044-35533 044-35558 044-35538 — 044-9619 044-35565458 Winchester Magnum — — 044-20804 — — 044-20833 044-20858 044-20838 — 044-9619 044-20865458 Lott — — 044-24104 — — 044-24133 044-20858 044-24138 — — 044-24165GROUP DFull Length Full Length Neck Neck Seater Exp-Decap TrimCaliber Die Set Sizer Die Die Set Sizer Die Die Unit Die$52.79 $42.77 $71.76 $51.83 $33.64 $6.52 $46.02$7.07*22 K-Hornet 044-26201 044-26229 044-26202 044-26230 044-26238 044-9802 044-2626522 Remington Jet 044-10401 044-10429 044-10402 044-10430 044-10438 044-9800* 044-1046522 Savage High-Power 044-33801 044-33829 044-33802 044-33830 044-33838 044-9803* 044-338655.6 x 50mm Rimmed 044-26301 044-26329 044-26302 044-26330 044-26338 044-9802 044-26365257 Roberts Improved (40º) 044-32201 044-32229 044-32202 044-32230 044-32238 044-9806 044-322656.5mm-06 044-27801 044-27829 044-27802 044-27830 044-27838 044-9807* 044-278656.5 Remington Magnum 044-33401 044-33429 — — 044-33438 044-9807* —6.5mm 284 Winchester 044-28701 044-28729 — — 044-28738 — —6.5 x 57mm 044-32801 044-32829 044-32802 044-32830 044-32838 044-9807* 044-328656.5 x 68Smm 044-27901 044-27929 044-27902 044-27930 044-27938 044-9807* 044-279657mm Bench Rest Remington 044-34101 044-34129 044-34102 044-34130 044-34138 044-9809 044-341657 x 65mm Rimmed 044-26701 044-26729 044-26702 044-26730 — 044-9809 044-267657.5x 54mm French MAS 044-29101 044-29129 044-29102 044-29130 044-29138 044-9832* 044-2916530 Mauser (7.63mm Mauser) 044-25101 044-25129 044-25102 044-25130 044-25138 044-9813* 044-2516530 Remington 044-29201 044-29229 044-29202 044-29230 044-29238 044-9812 044-2926530-338 Winchester Magnum 044-29401 044-29429 044-29402 044-29430 044-29438 044-9812 044-29465300 H&H Magnum 044-15001 044-15029 044-15002 044-15030 044-15038 044-9812 044-15065308 Norma Magnum 044-15601 044-15629 044-15602 044-15630 044-15638 044-9812 044-1566532-40 Winchester 044-32501 044-32529 044-32502 044-32530 044-32538 044-9816* 044-325658mm-06 044-32601 044-32629 044-32602 044-32630 044-32638 044-9817* 044-326658 x 68Smm Magnum 044-34401 044-34429 044-34402 044-34430 044-34438 044-9817* 044-34465.338-06 044-16701 044-16729 044-16702 044-16730 044-16738 044-9828* 044-16765348 Winchester 044-33601 044-33629 — — 044-33638 044-9819* 044-33665350 Remington Magnum 044-33701 044-33729 044-33702 044-33730 044-33738 044-9820* 044-337659.3 x 74mm Rimmed 044-34601 044-34629 044-34602 044-34630 044-34638 044-9821* 044-34665378 Weatherby Magnum 044-33001 044-33029 044-33002 044-33030 044-33038 044-9822* 044-33065400 CorBon 044-17501 044-17529 — — 044-17538 044-9835* 044-17565416 Remington Magnum 044-22701 044-22729 044-22702 044-22730 044-22738 044-9827* 044-22765416 Rigby 044-22801 044-22829 044-22802 044-22830 044-22838 044-9825* 044-22865460 Weatherby Magnum 044-33101 044-33129 044-33102 044-33130 044-33138 044-9826* 044-33165376 Steyr 044-17901 044-17929 044-17902 044-17930 044-17938 044-9822* 044-17965GROUP E3-DieCarbideTaper Carbide Sizer TaperCrimp 3-Die Sizer Die Expander Seater Crimp Decap TrimCaliber Set Set Die Die Die Seater Unit Die$74.28 $61.87 $52.07 $38.84* $23.41 $30.84 $30.84 $6.52 $46.02$79.38* $14.80*25 Automatic (25 ACP) (RN) 044-21015 — 044-21037 — 044-21049 — 044-21062 044-9621 044-210659mm Makarov (RN-SWC) 044-23015* — 044-23037 — 044-23053 — 044-23062 044-9622 044-2306532-20 Winchester (RN) — 044-18105 — 044-18132* 044-18153 044-18139 — 044-9622 044-1816538 Colt Super Automatic (RN) 044-20215 — 044-20237 044-20252 — 044-20262 044-9622 044-2026538-40 Winchester (RN)1 044-35605 — 044-35632* 044-35653 044-35639 — 044-9622 044-35665475 Linebaugh (1.400”) — — — 044-23553* — — 044-9622 —GROUP F (Legacy Series Die Sets)3-Die Sizer Expander Seater Decap TrimCaliber Set Die Die Die Unit Die$41.62 $24.24 $18.51* $22.06 $6.52 $33.15$46.85* $35.03* $17.10 $22.51+ $44.69*Miscellaneous Die AccessoriesEight heat-treated hex keys fit most hexhead screws on RCBS equipment.Key sizes: .050,1/16”, 5/64”, 3/32”,7/64”, 1/8”, 9/64” and 5/32”.The RCBS Die Lock-RingWrench simply slips onto thedie lock ring for quick and easy adjustment. A pivotinghandle allows leverage from any angle and theheat-treated steel stands up to all the brute force youcan muster.Hex Key Fold-Up WrenchDie Lock Ring WrenchDie Lock RingsDie Lock Ring 7/8-14 thread(1 per)Die Lock Ring 7/8-14 thread(5 pack)Shell Holder Rack - Holds12 to 24 standard shellholders, up to 6 Trim ProShell Holders. Can be wallmounted or used on thebench. Clear see throughremovable cover. Stickersincluded to number theshell holder postsOrder No.044-98975044-9634Order No.044-87501044-87507Price$7.785.70Price$2.729.54Order No.044-9461 $11.57375 Winchester 044-20604 044-20633 044-20658 044-20638 044-9619 044-2066538-55 Winchester & Ballard 044-36504* 044-36533* 044-36555* 044-36538+ 044-9619 044-36565*40-65 Shiloh-Sharps .408” Bore 044-23304* 044-23333* 044-23358* 044-23338+ 044-9619 044-23365*405 Winchester 044-23608* 044-23633* 044-23658* 044-23638+ 044-9619 044-23665*Die Box (Green)Die Box (Gray)Order No.044-9889044-9890Price$4.394.3988

COWBOY DIESFull Length 3-Die3-DIE Roll 3-Die Cowboy Cowboy CowboyRoll Crimp Carbide Steel Carbide Cowboy Cowboy Roll Crimp Cowboy CowboyCrimp Set Set Roll Sizer Die Sizer Expander Expander Seater Seater DecapCaliber $51.78 $51.78 Crimp $35.23 Die Die Assembly $23.64 Plug Unit$55.33* $55.33* $54.42 $32.97* $47.43 $23.39 $5.87 $22.12* $5.96 $6.65.25-20 WIN 044-11850 — — 044-11856 — 044-11857 044-9901 044-11858 044-90081 044-9628.30-30 WIN 044-14650* — — 044-14656 — 044-14657 044-9902 044-14658 044-90082 044-9628.32 S&W LONG/32 S&W — — 044-21451 — 044-21456 044-21457 9903/9917 044-21458 044-90083 044-9628.32 WIN SPL 044-15750* — — 044-15756 — 044-15757 044-9904 044-15758* 044-90084 044-9628.32 -20 WIN — 044-18151 — 044-18156 — 044-18157 044-9905 044-18158 044-90092 044-9628.32 -40 WIN 044-32550* — — 044-32556 — 044-32557 044-9904 044-32558 044-90084 044-9628.357 MAG/.38 SPL — — 044-18251 — 044-18256 044-18257 044-9906 044-18258 044-90085 044-9628.38 S&W — 044-20351 — 044-20356 — 044-20357 9906/9916 044-20358 044-90086 044-9628.38 -40 WIN — 044-35651 — 044-35656 — 044-35657 044-9907 044-35658 044-90087 044-9628.38 -55 WIN — 044-36551 — 044-36556 — 044-36557 9908/9915 044-36558 044-90088 044-9628.40-65 WIN.410” Bore — 044-36651* — 044-36656 — 044-36657 044-9909 044-36658 044-90087 044-9628.44 S&W RUSSIAN/44 SPL — — 044-18651 — 044-18656 044-18657 044-9910 044-18658 044-90089 044-9628.44-40 WIN — 044-18851 — 044-18856* — 044-18857 044-9911 044-18858 044-90089 044-9628.45 S&W SCHOFIELD/ .45 COLT — — 044-19151 — 044-19156 044-19157 9912/9913 044-19158* 044-90090 044-9628.45-70 US COLT — 044-20951 — 044-20956 — 044-20957 044-9914 044-20958 044-90091 044-9628Caliber204 Ruger22 Hornet22-250 Varminter220 Swift222 Rem223 Rem223 Rem SB223 WSSM243 Winchester243 WSSM25 WSSM25-06260 Rem6.5x55 Sw.Maus270 Win270 WinShortMag280 Rem7mm Rem Mag.7mm STW7mm-08 Rem7mmWinShortMag7mmR SA UltMag7mmRemUltraMag30-06 Spfd.30-06 Spfd SB30-30 Win300 WinShortMag300RemSA UltMag300 Wby Mag300 Win Mag300 RemUltraMag303 British308 Win308 Win SB8x57 Mauser338 Win Mag338RemUltraMag375RemUltraMagNow X-Sizers are sold Separately or inFull Length Die sets! Limits growth ofthe overall length of a cartridge case.Eliminates the need to trim rifle cases.Excellent for both progressive and singlestage reloaders. Sizes, decapsand expands the same as all fulllengthsizer dies.X-FLSizer Die$41.53$38.86*044-10309*044-38309044-37009044-38809044-37209*044-37109*044-38859044-10509044-37309*044-11609044-12409044-38959044-39009*044-38409*044-37509044-31309044-39059044-37609044-39109044-37409044-31409044-31109044-17809044-37709*044-39159*044-37909*044-30809044-31209044-39209044-38909044-17609044-39359044-37809*044-39259*044-38709044-39309044-17709044-30909X-FLDie Set$45.60$48.73*044-10312044-38312*044-37112044-38812*044-37012*044-37212044-38862044-10512*044-37312044-11612044-12412044-38962*044-39012*044-38412*044-37512*044-31312044-39062*044-37612*044-39112*044-37412044-31412*044-31112*044-17812*044-37712044-39162044-37912044-30812044-31212*044-39212*044-38912*044-17612044-39362*044-37812044-39262044-38712044-39312*044-17712*044-30912*See the RCBS Die Reference Table for adetailed listing of what shell holder fitswhat caliber. NOW AVAILABLE: Adapterfor Herters Press.Herters AdapterShell Holder #1Shell Holder #2Shell Holder #3Shell Holder #4Shell Holder #5Shell Holder #6Shell Holder #7Shell Holder #8Shell Holder #9Shell Holder #10Shell Holder #11X-Sizer DiesOrder No. Price044-99200 $17.73044-9201 6.18044-9202 6.18044-9203 6.18044-9204 6.18044-9205 6.18044-9206 6.18044-9207 6.18044-9208 6.18044-9209 6.18044-9210 6.18044-9211 6.18X-MandrelAssembly$9.23$8.64*044-10314*044-38314044-37114044-38814044-37014044-37214044-37214044-10514044-37314044-11614044-12414044-38964044-39014044-38414*044-37514044-31314044-39064044-37614044-39114044-37414044-31414044-31114044-17814044-37714044-37714044-37914044-30814044-31214044-39214044-38914044-17614044-39364044-37814044-37814044-38714044-39314044-17714044-30914Shell Holder #12Shell Holder #13Shell Holder #14Shell Holder #15Shell Holder #16Shell Holder #17Shell Holder #18Shell Holder #19Shell Holder #20Shell Holder #21Shell Holder #22Shell Holder #23Shell Holder #24Shell Holder #25Shell Holder #26Shell Holder #27Shell Holder #2850 BMG Full Length Die Set50 BMG Neck Sizer Die50 BMG Trim Die50 BMG Lock RingOrder No.044-87601 #1044-87602 #2044-87603 #3044-87604 #4044-87606 #6044-87607 #7044-87609 #9044-87610 #10044-88801 #1044-88802 #2044-88803 #3044-88804 #4044-88805 #5044-88806 #6044-88807 #7044-88808 #8044-88809 #9044-88810 #10044-88811 #11044-88812 #12044-88813 #13044-88814 #14044-88815 #15044-9212 $6.18044-9213 6.18044-9214 6.18044-9215 6.18044-9216 6.18044-9217 6.18044-9218 6.18044-9219 6.18044-9220 6.18044-9221 6.18044-9222 6.18044-9223 6.18044-9224 6.18044-9225 6.18044-9226 6.18044-9227 6.18044-9228 6.1850 BMG DiesThese massive dies are designed foruse with the AmmoMaster SingleStage Press with the 50 BMG conversionkit installed. All dies are manufacturedwith 1-1/2” -12 thread. FullLength Die set includes Full lengthSizer Die with Expander-DecappingUnit and Seater Die with BulletSeater Plug. Trim Die is case hardenedto prevent damage to the diewhen filing cases to length. NeckSizer Die sizes only the neck not theshoulder and body.Order No.044-30001044-30030044-30065044-9629Auto 4x4 Shell Plates044-87611 #11044-87612 #12044-87615 #15044-87616 #16044-87617 #17044-87618 #18044-87619 #19044-87620 #20044-87621 #21044-88816 #16044-88817 #17044-88818 #18044-88819 #19044-88820 #20044-88821 #21044-88822 #22044-88823 #23044-88824 #24044-88825 #25044-88826 #26044-88827 #27044-88828 #28044-88830 #30044-88831 #31Shell Holder #29Shell Holder #30Shell Holder #31Shell Holder #32Shell Holder #33Shell Holder #34Shell Holder #35Shell Holder #36Shell Holder #37Shell Holder #38Shell Holder #39Shell Holder #40Shell Holder #41Shell Holder #42Shell Holder #43Shell Holder #4450 BMG Shell HldrPrice$289.75177.92142.337.59044-87623 #23044-87624 #24044-87625 #25044-87626 #26044-87627 #27044-87628 #28044-87630 #30044-87632 #32$34.42 eaAmmomaster/PiggybackII& Pro 2000 Shell PlatesShell Holders044-88832 #32044-88833 #33044-88834 #34044-88835 #35044-88836 #36044-88837 #37044-88838 #38044-88839 #39044-88840 #40044-88841 #41044-88842 #42044-88843 #43044-88844 #44044-88845* #45$31.43$29.41*Replacement PartsDecappingCaliber Pin Number Price.22 PPC 044-96086mm PPC 044-96087mm Thompson/Center Ugalde 044-9609.35 Whelen 044-9609.358 Winchester/.356 Winchester 044-9609.416 Remington Magnum 044-9609Replacement PinsNew Style Headed Decapping Pins25 Cal. 35 gr. Gold Dot 044-9007132 Cal. Wadcutter 044-9001432 Cal. 60 gr. Gold Dot 044-90072357 SIG 125 gr. Gold Dot 044-90073357 180 gr. SIL 044-9001938 Cal. 125 gr. Gold Dot 044-9006538 Cal. 158 gr. Gold Dot 044-900669mm Cal. 90 gr. Gold Dot 044-900609mm Cal. 115 gr. Gold Dot 044-900619mm Cal. 124 gr. Gold Dot 044-900629mm Cal. 147 gr. Gold Dot 044-900639mm Makarov 95 gr. Conical 044-900169mm Makarov 90 gr. Gold Dot 044-9006440/10mm 155 gr. Gold Dot 044-9006740/10mm 165 gr. Gold Dot 044-9007440/10mm 180 gr. Gold Dot 044-9006810mm Round Nose 044-9003944 Cal. 240 gr. Silhouette 044-9003144 Cal. 270 gr. Gold Dot 044-9007545 Cal. 185 gr. Gold Dot 044-9006945 Cal. 230 gr. Gold Dot 044-9007045 Cal 500 gr. Black Powder Sil 044-90080044-9229 $6.18044-9230 6.18044-9231 6.18044-9232 6.18044-9233 6.18044-9234 6.18044-99235 6.18044-99236 6.18044-99237 6.18044-99238 6.18044-99239 6.18044-99240 6.18044-99241 6.18044-99242 6.18044-99243 6.18044-99244 6.18044-88746 19.73SH #2 ExtendedSH #3 ExtendedSH #6 ExtendedSH #10 ExtendedSH #18 ExtendedSH #45 ExtendedSH Ram CSH Ram HOrder No.044-8952044-8953044-8956044-8960044-8968044-8995Order No.044-9109044-9180$2.112.112.112.112.112.11DecappingCaliber Pin Number Price.22 thru .25 044-9608 $2.116.5mm thru .45 044-9609 2.1150 BMG 044-9602 4.93Headed Decapping Pin - Universallfits 22-45 (5 per )Order No044-90164Price$2.17Alternate Seater PlugsCaliber Part # Price$5.465.465.465.465.035.465.465.465.465.465.465.465.465.465.465.465.465.465.465.465.465.03Extended Shell HoldersPrice$10.3410.3410.3410.3410.3410.34Price$25.3116.7589

Reference ChartIMPORTANT: Dies listed under Groups A, B, C, D, E and F are Standard Dies. If the caliber of dies you require is not listed, please call for availability. RCBS® Shell Holder numbersdo not correspond to those of other manufacturers. When two Shell Holder numbers are listed, the most popular is shown first. It may be necessary to use the alternate,depending on the manufacturer and/or lot of cases being used. The numbers in ( ) in the table indicates the following: (1) Order Shell Holder by caliber. (2) Cases may be Berdanprimed. Depriming and priming must be done by hand. If cases were formed from cases having boxer-type primer, use the appropriate Shell Holder for the caliber. (4) Not available.(5) Auto 4x4 Shell Plate not available. (6) Auto 4x4 and Five-Station Shell Plates not available. (7) Use #14 for Lapua brass, #37 for Norma brass. The letter codes in thePlastic Ammo Box Size column indicate the following: SR = Small Rifle, MR = Medium Rifle, LR = Large Rifle, MP = Medium Pistol, LP = Large Pistol. * Used only with RotaryCase Trimmer and Rotary Case Trimmer-2.90