CANNULATED SCREW SYSTEM

Rationale, Features & BenefitsThe Stryker TraumaCannulated Screw Systems are designedto optimise surgical outcomes while simplifying procedures. The systemsincorporate several unique features intended to enhance screw placement,insertion and removal as follows:Low Profile Screw HeadReduced potential for soft-tissue irritationImproved external aestheticsMaterial ChoiceTitanium Alloy (TAV)Increased CT, MRI and Bio-compatibilityAnodizing Type II hardens Implant surface to minimise frettingStainless Steel (316LVM)Compatibility with current steel systemsPackaging ChoiceImplants available both sterile and non-sterileReverse Cutting FluteTo facilitate removalThread ChoiceImplants available with both partial and full thread optionsSelf-drilling / Tapping designFast efficient cutting for reduced operative time.Flat tip to minimise the potential for soft-tissue irritationLarge diameter Guide WiresLarge diameter reduces risk of deflection.Threaded tip engages bone for optimal purchase

Operative Technique - 6.5/8.0mmIndications 6.5/8.0mm6.5/8.0mm Indicators are as follows:• Intracapsular fractures of the femoral neck• Intertrochanteric fractures of the femur• Tibial plateau fractures• Fractures of the dorsal pelvic ring• Pelvic sacroiliac joint disruptions• Ankle arthrodesisStep oneInsert Guide WireGuide Wire insertionUsing an appropriate Power Tool, the 3.2x300mmGuide Wire is inserted to the appropriate depth througha tissue guide assembly. Use Image Intensification tocontrol reduction and Guide Wire placement.Multiple Guide Wire insertionConnect the Parallel or Multiple Drill Guide to theElastosil ® Hammer Handle. Using an appropriatePower Tool the 3.2x300mm Guide Wire is insertedto the appropriate depth. Use Image Intensificationto control reduction and place further parallelGuide Wires as necessary.Note:If washers are required ensure correct screw spacing is chosen.Technical TipAvoid Inferior Screw placement below the levelof the Lesser Trochanter to avoid PostoperativeSubtrochanteric Fractures. In the A/P view the initialGuide Wire should be placed at the level of the LesserTrochanter and inserted along the Inferior portion ofthe Femoral Neck. The Lateral view should show theGuide Wire centrally located in the Femoral Neckand Head. Anteversion may be checked by placinga Guide Wire over the Anterior Neck.

Step twoNote:Measure for Screw LengthRemove the Guide Wire Insertion Sleeve then slide theDirect Measuring Gauge over the Guide Wire.The Direct Measuring Gauge measures directly to the tipof the Guide Wire. This ensures the final Screw positioncorresponds with the initial tip position of the Guide Wire.Select appropriate screw length, always ensuring to selectthe lesser of the two sizes, if the measurement is betweensizes. It is recommended to subtract between 5-10mmfrom the measurement on the Direct Measuring Gaugeto avoid the potential penetration of the Femoral Head*.The Screw Insertion Sleeve is designed to allow theDirect Measuring Gauge to pass through it. This reduces potential softtissue damage and larger insertions.* This may not be necessary in other indications where it is desirableto insert a screw which matches exactly the position of the Guide Wire.Thus maximum thread purchase in the cortex is achieved.Step threeInsert ScrewUsing the Cannulated Screwdriver with Elastosil ®Handle and the Screw Holding Sleeve insert theselected screw over the Guide Wire. Release the screwHolding Sleeve prior to final tightening. Each Screw isinserted through the Soft Tissue Protection Sleeve.Note:Always verify the Guide Wire and screw position with periodicImage Intensification.Step fourVerify Final reductionVerify the final position of the screw.Remove and discard all Guide Wires.Repeat as necessary for additional screws.

Product Information4.0MM INSTRUMENTSRECOMMENDED MINIMUMREF NO DESCRIPTION SET QUANTITYCASE 901576 ASNIS III 4.0mm Plastic Lid – ( 3 ⁄ 4 Length ) 1901577 ASNIS III 4.0mm System Tray Insert without Screw Rack 1901578 ASNIS III 4.0mm System Screw Rack with Lid 1901557 ASNIS III Plastic Base – ( 3 ⁄ 4 Length) Optional901591 ASNIS III Metal Base – ( 3 ⁄ 4 Length) OptionalINSTRUMENTS702425 ASNIS III 4.0mm, Elastosil ® Handle with AO Quick Coupling 1702465 ASNIS III 4.0mm, Double Drill Guide Ø 1.4/2.7mm 1702449 ASNIS III 4.0mm, Cannulated Drill Ø 2.7mm with AO Coupling 1702448 ASNIS III 4.0mm, Drill Bit Ø 1.4 x 150mm Optional702454 ASNIS III 4.0mm, Cannulated Tap Ø 4.0mm with AO Coupling 1702473 ASNIS III 4.0mm, Cannulated Countersink for Ø 4.0mm Screws 1with AO Coupling702477 ASNIS III 4.0mm, Direct Measuring Gauge for Wires 1Ø 1.4/2.0 x 150mm702478 ASNIS III 4.0mm, Cannulated Screwdriver with Elastosil ® 1Handle – Hex 2.5mm702482 ASNIS III 4.0mm, Cannulated Screwdriver with AO Coupling Optional– Hex 2.5mm702485 ASNIS III 4.0mm, Solid Screwdriver with AO Coupling Optional– Hex 2.5mm702489 ASNIS III 4.0mm, Holding Sleeve for Screwdrivers 1– use with Screwheads Ø 5.0mm702492 ASNIS III 4.0mm, Cleaning Stylet Ø 1.4mm 1702496 ASNIS III 4.0mm, Extractor for Ø 4.0mm Screws Optional900105 Screw Forceps Optional702446 Cannulated Drill Ø 4.0mm with AO Coupling Optional702443 Parallel Guide for Ø 1.4mm Wires Optional4.0MM IMPLANTS – GUIDE WIRE AND WASHERS702459 ASNIS III 4.0mm, Threaded Guide Wire Ø 1.4 x 150mm 10STEELTITANIUM326040 390018 ASNIS III Washer for 4.0mm Screws 619905

4.0MM IMPLANTS –PARTIALLY THREADED SCREWSSTEELTITANIUM325014S ASNIS III Cannulated Screw 4.0 x 14mm 604614S325016S ASNIS III Cannulated Screw 4.0 x 16mm 604616S325018S ASNIS III Cannulated Screw 4.0 x 18mm 604618S325020S ASNIS III Cannulated Screw 4.0 x 20mm 604620S325022S ASNIS III Cannulated Screw 4.0 x 22mm 604622S325024S ASNIS III Cannulated Screw 4.0 x 24mm 604624S325026S ASNIS III Cannulated Screw 4.0 x 26mm 604626S325028S ASNIS III Cannulated Screw 4.0 x 28mm 604628S325030S ASNIS III Cannulated Screw 4.0 x 30mm 604630S325032S ASNIS III Cannulated Screw 4.0 x 32mm 604632S325034S ASNIS III Cannulated Screw 4.0 x 34mm 604634S325036S ASNIS III Cannulated Screw 4.0 x 36mm 604636S325038S ASNIS III Cannulated Screw 4.0 x 38mm 604638S325040S ASNIS III Cannulated Screw 4.0 x 40mm 604640S325042S ASNIS III Cannulated Screw 4.0 x 42mm 604642S325044S ASNIS III Cannulated Screw 4.0 x 44mm 604644S325046S ASNIS III Cannulated Screw 4.0 x 46mm 604646S325048S ASNIS III Cannulated Screw 4.0 x 48mm 604648S325050S ASNIS III Cannulated Screw 4.0 x 50mm 604650S325055S ASNIS III Cannulated Screw 4.0 x 55mm 604655S325060S ASNIS III Cannulated Screw 4.0 x 60mm 604660S325065S ASNIS III Cannulated Screw 4.0 x 65mm 604665S325070S ASNIS III Cannulated Screw 4.0 x 70mm 604670SFOR UNSTERILE SCREWS REMOVE THE ‘S’ AFTER THE REF. NUMBER4.0MM IMPLANTS –FULL THREAD SCREWSSTEELTITANIUM325210S ASNIS III Cannulated Screw 4.0 x 10mm 604710S325212S ASNIS III Cannulated Screw 4.0 x 12mm 604712S325214S ASNIS III Cannulated Screw 4.0 x 14mm 604714S325216S ASNIS III Cannulated Screw 4.0 x 16mm 604716S325218S ASNIS III Cannulated Screw 4.0 x 18mm 604718S325220S ASNIS III Cannulated Screw 4.0 x 20mm 604720S325222S ASNIS III Cannulated Screw 4.0 x 22mm 604722S325224S ASNIS III Cannulated Screw 4.0 x 24mm 604724S325226S ASNIS III Cannulated Screw 4.0 x 26mm 604726S325228S ASNIS III Cannulated Screw 4.0 x 28mm 604728S325230S ASNIS III Cannulated Screw 4.0 x 30mm 604730S325232S ASNIS III Cannulated Screw 4.0 x 32mm 604732S325234S ASNIS III Cannulated Screw 4.0 x 34mm 604734S325236S ASNIS III Cannulated Screw 4.0 x 36mm 604736S325238S ASNIS III Cannulated Screw 4.0 x 38mm 604738S325240S ASNIS III Cannulated Screw 4.0 x 40mm 604740S325242S ASNIS III Cannulated Screw 4.0 x 42mm 604742S325244S ASNIS III Cannulated Screw 4.0 x 44mm 604744S325246S ASNIS III Cannulated Screw 4.0 x 46mm 604746S325248S ASNIS III Cannulated Screw 4.0 x 48mm 604748S325250S ASNIS III Cannulated Screw 4.0 x 50mm 604750SPLEASE NOTE: FULL THREAD SCREWS ARE ONLY AVAILABLE ‘STERILE’

5.0MM IMPLANTS –PARTIALLY THREADED SCREWSSTEELTITANIUM325420S ASNIS III Cannulated Screw 5.0 x 20mm 601620S325422S ASNIS III Cannulated Screw 5.0 x 22mm 601622S325424S ASNIS III Cannulated Screw 5.0 x 24mm 601624S325426S ASNIS III Cannulated Screw 5.0 x 26mm 601626S325428S ASNIS III Cannulated Screw 5.0 x 28mm 601628S325430S ASNIS III Cannulated Screw 5.0 x 30mm 601630S325432S ASNIS III Cannulated Screw 5.0 x 32mm 601632S325434S ASNIS III Cannulated Screw 5.0 x 34mm 601634S325436S ASNIS III Cannulated Screw 5.0 x 36mm 601636S325438S ASNIS III Cannulated Screw 5.0 x 38mm 601638S325440S ASNIS III Cannulated Screw 5.0 x 40mm 601640S325442S ASNIS III Cannulated Screw 5.0 x 42mm 601642S325444S ASNIS III Cannulated Screw 5.0 x 44mm 601644S325446S ASNIS III Cannulated Screw 5.0 x 46mm 601646S325448S ASNIS III Cannulated Screw 5.0 x 48mm 601648S325450S ASNIS III Cannulated Screw 5.0 x 50mm 601650S325455S ASNIS III Cannulated Screw 5.0 x 55mm 601655S325460S ASNIS III Cannulated Screw 5.0 x 60mm 601660S325465S ASNIS III Cannulated Screw 5.0 x 65mm 601665S325470S ASNIS III Cannulated Screw 5.0 x 70mm 601670S325475S ASNIS III Cannulated Screw 5.0 x 75mm 601675S325480S ASNIS III Cannulated Screw 5.0 x 80mm 601680SFOR UNSTERILE SCREWS REMOVE THE ‘S’ AFTER THE REF. NUMBER5.0MM IMPLANTS –FULL THREAD SCREWSSTEELTITANIUM325620S ASNIS III Cannulated Screw 5.0 x 20mm 601720S325622S ASNIS III Cannulated Screw 5.0 x 22mm 601722S325624S ASNIS III Cannulated Screw 5.0 x 24mm 601724S325626S ASNIS III Cannulated Screw 5.0 x 26mm 601726S325628S ASNIS III Cannulated Screw 5.0 x 28mm 601728S325630S ASNIS III Cannulated Screw 5.0 x 30mm 601730S325632S ASNIS III Cannulated Screw 5.0 x 32mm 601732S325634S ASNIS III Cannulated Screw 5.0 x 34mm 601734S325636S ASNIS III Cannulated Screw 5.0 x 36mm 601736S325638S ASNIS III Cannulated Screw 5.0 x 38mm 601738S325640S ASNIS III Cannulated Screw 5.0 x 40mm 601740S325642S ASNIS III Cannulated Screw 5.0 x 42mm 601742S325644S ASNIS III Cannulated Screw 5.0 x 44mm 601744S325646S ASNIS III Cannulated Screw 5.0 x 46mm 601746S325648S ASNIS III Cannulated Screw 5.0 x 48mm 601748S325650S ASNIS III Cannulated Screw 5.0 x 50mm 601750S325655S ASNIS III Cannulated Screw 5.0 x 55mm 601755S325660S ASNIS III Cannulated Screw 5.0 x 60mm 601760S325665S ASNIS III Cannulated Screw 5.0 x 65mm 601765S325670S ASNIS III Cannulated Screw 5.0 x 70mm 601770SPLEASE NOTE: FULL THREAD SCREWS ARE ONLY AVAILABLE ‘STERILE’

Product Information6.5/8.0MM INSTRUMENTSRECOMMENDED MINIMUMREF NO DESCRIPTION SET QUANTITYCASE 901584 ASNIS III 6.5/8.0mm Plastic Lid (Full Length) 1901587 ASNIS III 6.5/8.0mm System Tray Insert without Screw Rack 1901588 ASNIS III 6.5/8.0mm System Screw Rack with Lid 1901585 ASNIS III 6.5/8.0mm Plastic Base (Full Length) 1901586 ASNIS III 6.5/8.0mm Metal Base (Full Length) Optional901589 ASNIS III 6.5/8.0mm Plastic Lid ( 3 ⁄ 4 Length) Optional901557 ASNIS III 6.5/8.0mm Plastic Base ( 3 ⁄ 4 Length) Optional901591 ASNIS III 6.5/8.0mm Metal Base( 3 ⁄ 4 Length) OptionalINSTRUMENTS6.5MM SYSTEM (cont.)RECOMMENDED MINIMUMREF NO DESCRIPTION SET QUANTITY702601 ASNIS III 6.5/8.0mm, Cannulated Drill Ø4.9mm with Large AO Fitting 1702602 ASNIS III 6.5/8.0mm, Cannulated Tap Ø6.5mm with Large AO Fitting 1702604 ASNIS III 6.5/8.0mm, Holding Sleeve for Screwdrivers 1– use with Screwheads Ø8.0mm702621 ASNIS III 6.5/8.0mm, Cannulated Countersink for 6.5/8.0mm OptionalScrews with AO Fitting702623 ASNIS III 6.5/8.0mm, Solid Screwdriver with Large AO Fitting Optional– Hex 5.0mm702625 ASNIS III 6.5/8.0mm, Cleaning Stylet Ø3.2mm 1702628 ASNIS III 6.5/8.0mm, Elastosil ® T-Handle with Large AO Coupling 1702629 ASNIS III 6.5/8.0mm, Cannulated Screwdriver with Elastosil ® Handle 1– Hex 5.0mm702630 ASNIS III 6.5/8.0mm, Elastosil ® Hammer-Handle with Large AO Coupling 1702638 ASNIS III 6.5/8.0mm, Protection Sleeve with Large AO Fitting 1702639 ASNIS III 6.5/8.0mm, Screw Insertion Sleeve 1702640 ASNIS III 6.5/8.0mm, Guide Wire Insertion Sleeve for Ø3.2mm 1Guide Wires702476 ASNIS III 6.5/8.0mm, Direct Measuring Gauge for Ø3.2mm 1Guide Wires702634 ASNIS III 6.5/8.0mm, Large AO Coupling - Hall Fitting Optional

ADDITIONAL FOR 8.0MM SYSTEMRECOMMENDED MINIMUMREF NO DESCRIPTION SET QUANTITY702611 ASNIS III 6.5/8.0mm, Cannulated Drill Ø5.6mm with Large AO Fitting 1702612 ASNIS III 6.5/8.0mm, Cannulated Tap Ø8.0mm with Large AO Fitting 1702614 ASNIS III 6.5/8.0mm, Holding Sleeve for Screwdrivers 1– use with Screwheads Ø9.0mmRequired only if 8.0mm Screws are includedOTHER INSTRUMENTSRECOMMENDED MINIMUMREF NO DESCRIPTION SET QUANTITY702603 ASNIS III 6.5/8.0mm, Cannulated Drill Ø6.5mm with Large AO Fitting* Optional702613 ASNIS III 6.5/8.0mm, Cannulated Drill Ø8.0mm with Large AO Fitting* Optional702622 ASNIS III 6.5/8.0mm, Cannulated Screwdriver with Large AO Fitting Optional– Hex 5.0mm702624 ASNIS III 6.5/8.0mm, Extractor for Ø6.5/8.0mm Screws Optional702626 ASNIS III 6.5/8.0mm, Drill Bit Ø3.2 x 300mm Optional702632 ASNIS III 6.5/8.0mm, Multiple Drill Guide with Elastosil ® OptionalHammer-Handle702633 ASNIS III 6.5/8.0mm, Multiple Drill Guide with Large AO Fitting Optional7 702635 ASNIS III 6.5/8.0mm, Parallel Drill Guide with Elastosil ® OptionalHammer-Handle702636 ASNIS III 6.5/8.0mm, Parallel Drill Guide with Large AO Fitting Optional702637 ASNIS III 6.5/8.0mm, Protection Sleeve with Elastosil ® OptionalHammer-Handle702641 ASNIS III 6.5/8.0mm, Quick Release Driver with Hall Fitting Optional900105 ASNIS III 6.5/8.0mm, Screw Forceps Optional* PLEASE NOTE THESE DRILLS ARE USED ONLY WITH FULL THREAD IMPLANTS

6.5MM SYSTEM (cont.)RECOMMENDED MINIMUMREF NO DESCRIPTION SET QUANTITY702462 ASNIS III Threaded Guide Wire Ø 3.2 x 300mm 10702463 ASNIS III Guide Wire without Thread Ø 3.2 x 300mm Optional702627 ASNIS III Guide Wire with Calibrations and fitting Ø 3.2 x 300mm OptionalSTEELTITANIUM32 390016 ASNIS III Washer for 6.5/8.0mm Screws 6199046.5MM IMPLANTS –20MM THREAD SCREWSSTEELTITANIUM326040S ASNIS III Cannulated Screw 6.5 x 40mm 602640S326045S ASNIS III Cannulated Screw 6.5 x 45mm 602645S326050S ASNIS III Cannulated Screw 6.5 x 50mm 602650S326055S ASNIS III Cannulated Screw 6.5 x 55mm 602655S326060S ASNIS III Cannulated Screw 6.5 x 60mm 602660S326065S ASNIS III Cannulated Screw 6.5 x 65mm 602665S326070S ASNIS III Cannulated Screw 6.5 x 70mm 602670S326075S ASNIS III Cannulated Screw 6.5 x 75mm 602675S326080S ASNIS III Cannulated Screw 6.5 x 80mm 602680S326085S ASNIS III Cannulated Screw 6.5 x 85mm 602685S326090S ASNIS III Cannulated Screw 6.5 x 90mm 602690S326095S ASNIS III Cannulated Screw 6.5 x 95mm 602695S326100S ASNIS III Cannulated Screw 6.5 x 100mm 602700S326105S ASNIS III Cannulated Screw 6.5 x 105mm 602705S326110S ASNIS III Cannulated Screw 6.5 x 110mm 602710S326115S ASNIS III Cannulated Screw 6.5 x 115mm 602715S326120S ASNIS III Cannulated Screw 6.5 x 120mm 602720SFOR UNSTERILE SCREWS REMOVE THE ‘S’ AFTER THE REF. NUMBER

6.5MM IMPLANTS –40MM THREAD SCREWSSTEELTITANIUM326255S ASNIS III Cannulated Screw 6.5 x 55mm 602855S326260S ASNIS III Cannulated Screw 6.5 x 60mm 602860S326265S ASNIS III Cannulated Screw 6.5 x 65mm 602865S326270S ASNIS III Cannulated Screw 6.5 x 70mm 602870S326275S ASNIS III Cannulated Screw 6.5 x 75mm 602875S326280S ASNIS III Cannulated Screw 6.5 x 80mm 602880S326285S ASNIS III Cannulated Screw 6.5 x 85mm 602885S326290S ASNIS III Cannulated Screw 6.5 x 90mm 602890S326295S ASNIS III Cannulated Screw 6.5 x 95mm 602895S326300S ASNIS III Cannulated Screw 6.5 x 100mm 602900S326305S ASNIS III Cannulated Screw 6.5 x 105mm 602905S326310S ASNIS III Cannulated Screw 6.5 x 110mm 602910S326315S ASNIS III Cannulated Screw 6.5 x 115mm 602915S326320S ASNIS III Cannulated Screw 6.5 x 120mm 602920SFOR UNSTERILE SCREWS REMOVE THE ‘S’ AFTER THE REF. NUMBER6.5MM IMPLANTS –FULL THREAD SCREWSSTEELTITANIUM326430S ASNIS III Cannulated Screw 6.5 x 30mm 606030S326435S ASNIS III Cannulated Screw 6.5 x 35mm 606035S326440S ASNIS III Cannulated Screw 6.5 x 40mm 606040S326445S ASNIS III Cannulated Screw 6.5 x 45mm 606045S326450S ASNIS III Cannulated Screw 6.5 x 50mm 606050S326455S ASNIS III Cannulated Screw 6.5 x 55mm 606055S326460S ASNIS III Cannulated Screw 6.5 x 60mm 606060S326465S ASNIS III Cannulated Screw 6.5 x 65mm 606065S326470S ASNIS III Cannulated Screw 6.5 x 70mm 606070S326475S ASNIS III Cannulated Screw 6.5 x 75mm 606075S326480S ASNIS III Cannulated Screw 6.5 x 80mm 606080S326485S ASNIS III Cannulated Screw 6.5 x 85mm 606085S326490S ASNIS III Cannulated Screw 6.5 x 90mm 606090S326495S ASNIS III Cannulated Screw 6.5 x 95mm 606095S326500S ASNIS III Cannulated Screw 6.5 x 100mm 606100S326505S ASNIS III Cannulated Screw 6.5 x 105mm 606105S326510S ASNIS III Cannulated Screw 6.5 x 110mm 606110S326515S ASNIS III Cannulated Screw 6.5 x 115mm 606115S326520S ASNIS III Cannulated Screw 6.5 x 120mm 606120SPLEASE NOTE: FULL THREAD SCREWS ARE ONLY AVAILABLE ‘STERILE’

8.0MM IMPLANTS –PARTIAL THREAD SCREWSSTEELTITANIUM326640S ASNIS III Cannulated Screw 8.0 x 40mm 611040S326645S ASNIS III Cannulated Screw 8.0 x 45mm 611045S326650S ASNIS III Cannulated Screw 8.0 x 50mm 611050S326655S ASNIS III Cannulated Screw 8.0 x 55mm 611055S326660S ASNIS III Cannulated Screw 8.0 x 60mm 611060S326665S ASNIS III Cannulated Screw 8.0 x 65mm 611065S326670S ASNIS III Cannulated Screw 8.0 x 70mm 611070S326675S ASNIS III Cannulated Screw 8.0 x 75mm 611075S326680S ASNIS III Cannulated Screw 8.0 x 80mm 611080S326685S ASNIS III Cannulated Screw 8.0 x 85mm 611085S326690S ASNIS III Cannulated Screw 8.0 x 90mm 611090S326695S ASNIS III Cannulated Screw 8.0 x 95mm 611095S326700S ASNIS III Cannulated Screw 8.0 x 100mm 611100S326705S ASNIS III Cannulated Screw 8.0 x 105mm 611105S326710S ASNIS III Cannulated Screw 8.0 x 110mm 611110S326715S ASNIS III Cannulated Screw 8.0 x 115mm 611115S326720S ASNIS III Cannulated Screw 8.0 x 120mm 611120SFOR UNSTERILE SCREWS REMOVE THE ‘S’ AFTER THE REF. NUMBER8.0MM IMPLANTS –FULL THREAD SCREWSSTEELTITANIUM326840S ASNIS III Cannulated Screw 8.0 x 40mm 611240S326845S ASNIS III Cannulated Screw 8.0 x 45mm 611245S326850S ASNIS III Cannulated Screw 8.0 x 50mm 611250S326855S ASNIS III Cannulated Screw 8.0 x 55mm 611255S326860S ASNIS III Cannulated Screw 8.0 x 60mm 611260S326865S ASNIS III Cannulated Screw 8.0 x 65mm 611265S326870S ASNIS III Cannulated Screw 8.0 x 70mm 611270S326875S ASNIS III Cannulated Screw 8.0 x 75mm 611275S326880S ASNIS III Cannulated Screw 8.0 x 80mm 611280S326885S ASNIS III Cannulated Screw 8.0 x 85mm 611285S326890S ASNIS III Cannulated Screw 8.0 x 90mm 611290S326895S ASNIS III Cannulated Screw 8.0 x 95mm 611295S326900S ASNIS III Cannulated Screw 8.0 x 100mm 611300S326905S ASNIS III Cannulated Screw 8.0 x 105mm 611305S326910S ASNIS III Cannulated Screw 8.0 x 110mm 611310S326915S ASNIS III Cannulated Screw 8.0 x 115mm 611315S326920S ASNIS III Cannulated Screw 8.0 x 120mm 611320SPLEASE NOTE: FULL THREAD SCREWS ARE ONLY AVAILABLE ‘STERILE’

Surgical TipsOptions:Tap / Drill - In hard or sclerotic bone, pre-drilling and pre-tappingmay be necessary.Cannulated Screwdriver with AO fitting - This can be used witheither the Elastosil ® Handle with AO Coupling or a Power Tool.If a Power Tool is selected final tightening must be carried outby hand to prevent stripping.Cleaning:Removal:Single Use Items:Care should be taken to utilise the Cleaning Stylet for Inter andPost-Operative cleaning of cannulations. Correct inter-operativeuse of this instrument prevents accumulation of debris.It is recommended that the Solid Screwdriver be used for Screwremoval. This can apply greater torque and will reduce the potentialfor damaging the hex tip on the Screwdriver.Discard all single-use implants and instruments utilised duringthe procedure.NotesWarning: Bone Screws referenced in this materialare not approved for screw attachment or fixationto the posterior elements (pedicles) of the cervical,thoracic or lumbar spine.

This new generation of Cannulated Screws has been designed to optimisesurgical outcomes while simplifying procedures. The ASNIS III System offersthe surgeon a complete choice of implants, material and packaging combinedwith a new user-friendly instrumentation.LOGO #2The OMEGA + Compression Hip Screw System integrates innovative featuressuch as sideplate made of superstrong alloy material and improvedinstrumentation. OMEGA + Plates and Lag Screws are available in Sterileor Non-Sterile packaging for customer preference and convenience.LOGO #3The TGN is the latest development in the continuing evolution of the GammaLocking Nail family designed for rapid and secure fixation of intertrochantericand pertrochanteric fractures. Combining strength and biomechanicaladvantages of the existing Gamma family it is the Golden standard forproximal femoral fractures.LOGO #4The Long Gamma Nail is a specialized development of the original GammaLocking Nail allowing surgeons to extend the benefits of the highly successfulstandard implant for trochanteric fractures. It has been designed to treatsubtrochanteric, ipsilateral neck and shaft fractures as well as for prophylactic use.MANUFACTURER:Stryker TraumaSelzach AGBohnackerweg 12545 SelzachSwitzerlandREF NO: 982187VER. TASN0105/02750E© 2002 Stryker Corporation. All rights reserved.