12.07.2015 Views

Apricus Solar Water Heating System Installation and Operation ...

Apricus Solar Water Heating System Installation and Operation ...

Apricus Solar Water Heating System Installation and Operation ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Apricus</strong> <strong>Solar</strong> Collector <strong>Installation</strong> & <strong>Operation</strong> Manual - USAProblem Cause Solution<strong>System</strong> operation isnoisyAir in system pipingSteam forming in collectorSediment buildup in bottom of tankor on electric element· Release air from air vent· Purge system of air by following Fill <strong>and</strong> Pressurizeprocedure described in section 3.7· Check system pressure, collector pressure must be atleast 20 psi / 1.37 bar· Use <strong>Solar</strong> Hi-temp heat transfer fluidFlush tank clean of sediment. If tank is more than 7-10years old, replace. If in area with hard water should flushevery 6-12 months <strong>and</strong>/or install water softeningequipment.Copyright 2011 – <strong>Apricus</strong> Inc Doc: A7-05.4.1.4-PB-1.9 Page 86 of 126

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!