2. installation procedure for optional equipment - toshiba tec europe
2. installation procedure for optional equipment - toshiba tec europe
2. installation procedure for optional equipment - toshiba tec europe
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>2.</strong> INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-12010<strong>2.</strong>3 Installing the Line Display, Pole Unit, and VFD Stand7) Hook the VFD Frame as shown in the figure, then secure it with the four screws.T-3x8 ScrewHookT-3x8 Screw8) Secure the VFD Base Frame onto the POS terminal with the four screws.DSM-4x12 ScrewVFD Base FrameDSM-4x12 Screw9) Lead the VFD Cable as shown in the figure, then secure the Rear Cover onto the POS terminal with the twoscrews.10) Hook the VFD Base Frame onto the VFD Frame at the three portions.HookVFD FrameVFD Base FrameRear CoverVFD Cable11) Secure the VFD Stand with the two screws.2-12
Change language