Hubbell Wiring Device.pdf - Eversave Technology

Kellems ® Wire Management ProductsTechnical InformationCord Connectors4 ConductorsSJ, SJO,SJT,Cord Type SJTO S, SO, ST, STOCord Size #6 #4 #3 #2 #1 #1/0 #2/0 #3/0 #4/0Approx. .94" 1.08" 1.17" 1.27" 1.44" 1.52" 1.65" 1.77" 1.92"Diameter (23.8) (27.4) (29.7) (33.3) (36.6) (38.6) (41.9) (45.0) (48.8)N.P.T. Form Catalog Numbers*¼ 1 • • • • • • • • • 1 • • • • • • • • •½ 1 • • • • • • • • •½ 2 • • • • • • • • •½ 3 • • • • • • • • •¾ 2 • • • • • • • • •¾ 3 • • • • • • • • •1 4 HC1044 • • • • • • • •1 5 HC1047 HC1049 HC1049 • • • • • •1¼ 5 HC1052 HC1054 HC1054 • • • • • •1½ 5 HC1057 HC1059 HC1059 • • • • • •1½ 6 • HC1060 HC1060 HC1061 HC1063 HC1064 • • •2 6 • HC1064 HC1065 HC1066 HC1068 HC1069 • • •2 7 • • • • • HC1070 HC1071 HC1073 HC10742½ 7 • • • • • HC1076 HC1077 HC1079 HC10803 7 • • • • • HC1086 HC1087 HC1089 HC1090Color Pink‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡* Must add prefix, see Note 1; suffix, see Note 2, below.‡ F5 and larger will not be color coded.Notes:1. Add the proper prefix to the HC number to identifythe type of connector desired:SHC = Straight Hubbell ConnectorNHC = 90° Hubbell ConnectorFHC = Female Hubbell ConnectorVHC = 45° Hubbell Connector2. Add the proper suffix to identify material desired:Aluminum = No suffixZinc-Plated Steel = ZPCorrosion Resistant Nylon = CRStainless Steel = SS3. This chart is a general guide to assist in the selection ofHubbell Cord Connectors for various cord sizes. TheHubbell Cord Connector catalog numbers selected,have been inserted into spaces which in our judgmentrepresent the best cord connector which will fit thelisted cord size.The diameters of the cords are approximate and mayvary depending on the manufacturer. It is suggestedthat the appropriate cord manufacturer’s dimensionchart be consulted for exact dimensions.4. Cable jacket may have to be stripped to allowconductors to pass through connector body.Kellems ® Wire Management Products Technical InformationDimensions in Inches (mm)www.hubbell-wiring.comT-101