Hubbell Wiring Device.pdf - Eversave Technology

Technical Information Kellems ® Wire Management ProductsKellems ® Wire Management ProductsTechnical InformationStrain Relief for Liquidtight ConduitStrain Relief for UL Type A, Flexible, Liquidtight ConduitKellems Grips for UL Type A, non-metallic, flexible, liquidtight conduit are available in straight and 90° male and featurea high quality Hubbell plated steel or malleable iron fitting, complete with a sealing O-ring, lock nut and stainless steelmesh. These grips increase the retention of the conduit in the fitting, control its arc-of-bend and provide a liquidtight seal.ApplicationThese grips are used on UL Type A non-metallic conduit connections at limit switches, motor boxes, panel boards,control stations and on all types of machinery and machine tools.Benefits• Provides a liquidtight seal.• Helps prevent conduit pull-out.• Reduces conduit cutting, kinking, fraying and splitting at the fitting.• Easily installed.Steel Locknut has tangs that diginto box for excellent continuity ofground. Locknut will not slip or spin.Insulated throat protectsinsulation on wires duringpulling. Yellow color easilyseen by inspectors.Neoprene O-ring is factoryassembled into the body toseal out liquids.Yellow nylon ferrule fits inside nonmetallicconduit to hold the shape.Barb in designed to assure liquidtightseal even with non-square cut.Ferrule is keyed to fit into body toprevent conduit twisting.Body is virtually unbreakable. Straight connectors through1" are screw machine steel; other sizes are malleable iron.Threads are tapered to insure liquidtight seal when used inthreaded hub. Octagonal shape inside holds the ferrule toprevent conduit from twisting during installation.Wire mesh gripprevents pullout.Hexagonal compression nut is machinesteel through 1" malleable iron on largersizes. Tapered interior compressessleeve over conduit sealing out liquidsand preventing pullout.Yellow nylon sleeve installs overconduit. Six slits in sleeve permittight compression onto conduitas compression nut is tightened.T-78 www.hubbell-wiring.comDimensions in Inches (mm)