Hubbell Wiring Device.pdf - Eversave Technology

Kellems ® Wire Management ProductsTechnical InformationFiber Optic Support GripsSupport Grips for Fiber Optic CableKellems Support Grips for fiber optic cable are specially designed to hold the cable weight as it hangs in avertical or horizontal position. Fiber optic cable must be supported and Kellems Grips provide the supporteasily and economically.These grips are made of high grade, non-magnetic tin-coated bronze strand. They are offered in universalbale or single eye configurations and are available in either closed mesh (for use where the cable end isavailable) or in split mesh, rod closing (for installation on existing cable runs or at specific locations).Split Support Grip Rod Closing InstructionsThe stainless steel rod is a precise built-in feature which makes threading easy and fast. The strands of themesh pass around the rod and match up with the strands from the opposite direction. The rod does nottouch the cable at any point and therefore cannot cut the cable. Rod Closing Grips are reusable. They maybe removed and reused as many times as desired.Fast to InstallStep 1. Wrap the grip around the cable and thread the rod through the preformed loops with a corkscrewmotion, using the curved end of the rod to engage the loops.Step 2. The action required is a steady push and twist simultaneously. The fingers of the left hand are usedto bring the loops together just ahead of the hook on the end of the rod.Step 3. To remove, simply pull the rod out.Kellems ® Wire Management Products Technical InformationDimensions in Inches (mm)www.hubbell-wiring.comT-57