Hubbell Wiring Device.pdf - Eversave Technology

Metal RacewayHBL500 and HBL750 SeriesFittings HBL500 and HBL750 Series ColorInternal Elbow - Bend RadiusFor inside surface at rightangles requiring a 1.5 in.(38.10) bend radius.Suitable for Category 5,5e, 6 and 6a applications.External Elbow - Bend RadiusFor outside surfaces at rightangles requiring a 1.5 in.(38.10) bend radius.Suitable for Category 5,5e, 6 and 6a applications.Flat Elbow - Bend RadiusFor right angle turnsrequiring a 1.5 in.(38.10) bend radius.Suitable for Category 5,5e, 6 and 6a applications.Tee Fitting - Bend RadiusFor branches at rightangles requiring a 1.5 in.(38.10) bend radius.Suitable for Category 5,5e, 6 and 6a applications.Tee FittingFor branches at right angles.Internal Twisted ElbowsFor 90° twist with 90° turn.For double turn at right anglesfrom one to another. From aflat run on a side wall to a flatrun on a ceiling, edge of dooror window trim.Corner BoxFor connecting HBL500 orHBL750 Raceway from ceilingor corner. Each leg of base has½ in. trade size KO.CouplingFor joining and supporting lengthsof HBL500 or HBL750 Raceway.Dimensions in Inches (mm)www.hubbell-wiring.comHBL5717BRIVA: 3.33" (84.51)B: .91" (23.11)C: 3.33" (84.51)HBL5718BRIVA: 4.86" (123.43)B: .78" (19.80)C: 1.35" (34.28)HBL5711BRIVA: 3.16" (80.34)B: .91" (23.11)C: 3.16" (80.34)HBL5715BRIVA: 5.55" (140.88)B: .90" (22.86)C: 3.16" (80.34)HBL5715IVHBL5715WA: 3.06" (77.67)B: 1.14" (28.86)C: 3.03" (76.96)Right ElbowHBL5711RHIVHBL5711RHWA: 2.98" (75.72)B: .94" (23.75)C: 3.00" (76.20)HBL5719IVHBL5719WA: 2.50" (63.50)B: 2.50" (63.50)C: 2.40" (60.96)HBL5701CA: 2.00" (50.80)Left ElbowHBL5711LHIVHBL5711LHWA: 2.98" (75.72)B: .94" (23.75)C: 3.00" (76.20)IvoryIvoryIvoryIvoryIvoryWhiteIvoryWhiteIvoryWhiteGalvanizedSteelO-11Metal Raceway HBL500 and HBL750 Series