Hubbell Wiring Device.pdf - Eversave Technology

Security Wallplates WallplatesWallplatesSecurity WallplatesSWP1SWP82SWP28SWPBITSWP8SWP181-Gang, WhiteDescriptionToggle switch.Duplex receptacle.GFCI/Style Line ® device.Telephone or TV opening (.64 inch).Single blank.2-Gang, WhiteDescriptionTwo toggle switches.Two duplex receptacles.One switch, one duplex receptacle.Two rectangular openings.One duplex receptacle, one telephone or TV.One duplex receptacle, one blank.Double blank.3-Gang, WhiteDescriptionTwo switches, one duplex receptacle.AccessoriesDescriptionTamperproof screwdriver for security wallplates.Note: * Not listed by Underwriter’s Laboratories Inc.DimensionsSpecificationsBA B C D E F G H1-Gang 3.77" 5.52" .55" 3.37" 5.13" 1.00" 4.63" 2.88"(mm) (95.8) (140.2) (14.0) (85.6) (130.3) (25.4) (117.6) (73.2)2-Gang 5.52" 5.52" .55" 5.13" 5.13" 1.00" 4.63" 4.63"(mm) (140.2) (140.2) (14.0) (130.3) (130.3) (25.4) (117.6) (117.6)3-Gang 7.39" 5.52" .55" 7.00" 5.13" 1.00" 4.63" 6.50"(mm) (187.71) (140.21) (14.0) (177.8) (130.3) (25.4) (117.6) (165.1)Tamper resistant wallplate 1-gang duplex receptacle shall be of the following construction:Cover plate: One piece #14 cold rolled zincplated steel. Plate shall have a five stage bakedwhite polyester powder enamel finish. Gloss:85%; reflectance: 93%; hardness minimum:2H and pass 600 hour salt spray test.ANEC ® is a registered trademark of the The National Electrical Code.TORX ® is a registered trademark of Textron Inc.CEFDHGCatalog NumbersSWP1SWP8SWP26SWP12SWP13Catalog NumbersSWP2SWP82SWP18SWP262SWP812SWP813SWP23Catalog NumberSWP28Catalog NumberSWPBIT*Back plate: #10 cold rolled galvanized steel.Plate assembly shall use four (4) #8-32 X½ inch stainless steel T-15 TORX ® head screwswith center pin reject. Plate must be UL listedto UL 514D and comply with the NEC ® .K-22 www.hubbell-wiring.comDimensions in Inches (mm)