Hubbell Wiring Device.pdf - Eversave Technology
Share Embed Flag
Download ePaper

Hubbell Wiring Device.pdf - Eversave Technology

Hubbell Wiring Device.pdf - Eversave Technology Hubbell Wiring Device.pdf - Eversave Technology

eversavetech.net
from eversavetech.net More from this publisher
12.07.2015 Views

DIN Rail Surge Products SpikeShield ® Power Quality ProductsSpikeShield ® Power Quality ProductsDIN Rail Surge Products65,000 and 40,000 Peak Amperage CapacityOEM/Specialty Surge ProtectionThe SpikeShield offering includes a selection of hard-wired surge suppressors that can be internally mounted insideequipment cabinets. The DR series are DIN Rail mounted, provide 65,000 peak amp capacity and are parallel wired.The TDR series features an integral DIN Rail mounting system and a set of attachable mounting feet that allows thedevice to be flange mounted. The TDR models provide 40,000 peak amp capacity, up to -75dB of noise filtration and areseries wired. Load ratings of 5, 15, and 20 amps are available in the 120-volt model and may be ordered with or withouta set of dry contacts for remote signaling capability. Both products are ideal for panel builders, manufacturers andintegrators of control or instrumentation cabinets for industrial, medical or commercial applications.HBL1DR65Electrical SpecificationsHBL1TDR755Electrical SpecificationsDIN Rail Mounted, Parallel-Wired (DR Series)Service Voltage V AC Configuration Catalog Numbers120 (Single Phase) 1Ph. 2-wire +G HBL1DR65240 (Single Phase) 1Ph. 2-wire +G HBL2DR65**Note: ** For international applications.Voltage Protection Rating (VPR)Catalog Number MCOV † L-N L-G N-G L-LHBL1DR65 150 400 400 400 N/AHBL2DR65 320 800 800 800 N/AMax. Surge Current per Phase: 65kAMax. Surge Current per Mode: 32kAMax. Operating Temperature: -10°F to 60°F (14°C to 140°C)Diagnostics:Green Status LED’s, Audible Alarm, Diagnostic ContactsDimensions:2.28"D x 2.82"W x 3.5"HWeight:0.512 lbs.Terminal Accommodation: Up to #12 AWGFrequency:50/60/400 HzEMI/RFI:Up tp -40dBNEMA:1, Non-MetallicWarranty:10 yearNote: † MCOV - Maximum Continuous Operating Voltage.DIN Rail/Flange Mounted, Series Wired (TDR Series)Catalog Numbers Catalog NumbersService Voltage Configuration with Dry Contacts without Dry Contacts120 (Single Phase) 1Ph. 2-wire +G HBL1TDR755DC HBL1TDR755120 (Single Phase) 1Ph. 2-wire +G HBL1TDR7515DC HBL1TDR7515120 (Single Phase) 1Ph. 2-wire +G HBL1TDR7520DC HBL1TDR7520240 (Single Phase) 1 Phase 2 wire HBL2TDR7520DC**Note: ** For international applications.Voltage Protection Rating (VPR)Catalog Numbers SCCR* Mounting MCOV † L-N L-G N-G L-LHBL1TDR755DC HBL1TDR755 5 Back Nipple 150 330 330 330 N/AHBL1TDR7515DC HBL1TDR7515 15 Back Nipple 150 330 330 330 N/AHBL1TDR7520DC HBL1TDR7520 20 Side Nipple 150 330 330 330 N/AHBL2TDR7520DC – 20 Side Nipple 320 800 800 700 N/AMax. Surge Current per Phase: 40kAMax. Surge Current per Mode: 20kAMax. Operating Temperature: -10°F to 60° F (14°C to 140°C)Diagnostics:Green Status LED’s, Dry ContactsDimensions:5.26"D x 4.00"W x 2.23"HWeight:1 lbs.Terminal Accommodation: Up to #12AWGFrequency:60 HzNEMA:1, Non-MetallicWarranty:10 yearNotes: * SCCR - Short Circuit Current Rating† MCOV - Maximum Continuous Operating Voltage.CJ-12 www.hubbell-wiring.comDimensions in Inches (mm)

SpikeShield ® Power Quality ProductsUtility Meter Surge Protection120,000 Peak Amperage CapacityHomeGuard Meter-Mounted Residential Surge ProtectionHubbell’s SpikeShield SPD offering also includes a product designed to provide“Whole House Protection” at the utility meter socket. The HomeGuard surgesuppression system provides service entrance protection against lightning or otherexternally generated transients. This products has a 120,000 peak amp capacity forsingle phase 200 amp meter sockets. HomeGuard is designed to isolate your homefrom external events that affect power quality.Utility Meter Surge ProtectionService Voltage V AC Configuration Catalog Numbers120/240 (Single Phase) 1PH 120/240 V AC HBL80MPCElectrical SpecificationsCatalog Number SCCR* MCOV † Voltage Protection Rating (VPR)HBL80MPC 10kA 150/per phase 700Max. Surge Current per Phase: 60kAMax. Total Surge Current: 120kAMax. Operating Temperature: -10°F to 60°F (14°C to 140°C)Diagnostics:Audible AlarmDimensions:3.63"H x 8.73"WEMI/RFI:Up tp -20dBFrequency:60 HzNEMA:3R, 2 Meter Base, Non-MetallicWarranty:10 yearNotes: * SCCR - Short Circuit Current Rating.† MCOV - Maximum Continuous Operating Voltage.FeaturesThermal fusing.Meter socket adapter design.Audible alarm.BenefitsThermal fuse prevents the MOV from overheating whenexposed to high current levels, a patented Hubbell exclusive.Mounts quickly and easily to the meter socket at the entrance.Audible alarm for module failure.Note: HomeGuard is UL (cUL) Listed as a secondary surge arrester and tested toANSI/IEEE C62.11 Standard.HBL80MPCHubbell HomeGuard meter-mountsurge protector is pictured above,connected to local utility service.HomeGuard meter-mounted surgeprotection should be installed byyour local utility service.SpikeShield ® Power Quality Products Utility Meter Surge ProtectionDimensions in Inches (mm)www.hubbell-wiring.comJ-13

SpikeShield ® Power Quality ProductsUtility Meter Surge Protection120,000 Peak Amperage CapacityHomeGuard Meter-Mounted Residential Surge Protection<strong>Hubbell</strong>’s SpikeShield SPD offering also includes a product designed to provide“Whole House Protection” at the utility meter socket. The HomeGuard surgesuppression system provides service entrance protection against lightning or otherexternally generated transients. This products has a 120,000 peak amp capacity forsingle phase 200 amp meter sockets. HomeGuard is designed to isolate your homefrom external events that affect power quality.Utility Meter Surge ProtectionService Voltage V AC Configuration Catalog Numbers120/240 (Single Phase) 1PH 120/240 V AC HBL80MPCElectrical SpecificationsCatalog Number SCCR* MCOV † Voltage Protection Rating (VPR)HBL80MPC 10kA 150/per phase 700Max. Surge Current per Phase: 60kAMax. Total Surge Current: 120kAMax. Operating Temperature: -10°F to 60°F (14°C to 140°C)Diagnostics:Audible AlarmDimensions:3.63"H x 8.73"WEMI/RFI:Up tp -20dBFrequency:60 HzNEMA:3R, 2 Meter Base, Non-MetallicWarranty:10 yearNotes: * SCCR - Short Circuit Current Rating.† MCOV - Maximum Continuous Operating Voltage.FeaturesThermal fusing.Meter socket adapter design.Audible alarm.BenefitsThermal fuse prevents the MOV from overheating whenexposed to high current levels, a patented <strong>Hubbell</strong> exclusive.Mounts quickly and easily to the meter socket at the entrance.Audible alarm for module failure.Note: HomeGuard is UL (cUL) Listed as a secondary surge arrester and tested toANSI/IEEE C62.11 Standard.HBL80MPC<strong>Hubbell</strong> HomeGuard meter-mountsurge protector is pictured above,connected to local utility service.HomeGuard meter-mounted surgeprotection should be installed byyour local utility service.SpikeShield ® Power Quality Products Utility Meter Surge ProtectionDimensions in Inches (mm)www.hubbell-wiring.comJ-13

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!