WARNING - Amazon S3

3A• Place Control Panel Assembly onto Smoker Chamber by placing tabs under the front edge of the Smoker Chamber. TheControl valve must engage the burner venturi tube as shown A.• From the inside of the Smoker Chamber, Install 2 #10-24x3/8” screws through the smoker chamber and through theControl panel Tabs as shown. Thread 1 #10-24 Keps Nut onto each screw and tighten As shown B. Install 2 #10-24x3/8”screws through the control panel tabs and into the burner assembly housing. Thread 1 #10-24 Keps Nut onto each screwand tighten securely. Shown BControlValveBControlPanel Tabs#10-24x3/8" ScrewsQty: 4Qty: 4#10-24x3/8" Screw #10-24 Keps NutNOTE: Hose not shownfor clarityInstall 1 #10-24x3/8"Screw per sideControl PanelShown InstalledControl PanelScrew HoleBurner AssemblyHousing4• Be sure the electrode wire exits the hole UNDER the venturi tube hole. DO NOT route the wire through the same hole asthe burner venturi tube.• Install Ignitor Wire by pushing the round connector onto the Ignitor as shown.Rotary ignitorPush theRound endof ignitor wireonto theRotary IgnitorRoute wirethroughhole under theVenturi TubeHole14 • 11701705