VCI07 - Duncan Rogers

3.3 Menus and changeable features3.3.1 Status menuThe status menu can be considered as the default menu. It is shown at start-up of the controller and the VCI07will revert to this menu after one minute when the keyboard activity stops while displaying a different menu. Thefollowing messages are displayed :• Machine status (e.g. standby, blowing down, onload, offload, etc.)• Time and day• Errors - active faults are blinking (e.g. air. Temp ----, Oil filt P warn, etc.)3.3.2 Error log menuThe VCI07 saves the 10 most recent occurred faults. By using the up and down arrow-button all the messagescan de displayed. Below an example is given:Display messageFault log nr. 1High pressure faultFault log nr. 2Emergency stopFault log nr. 3Air filter P warningFault log nr. 4Temperature probe faultEtc.MeaningOccurred fault number 1 is being displayedOccurred fault number 2 is being displayedOccurred fault number 3 is being displayedOccurred fault number 4 is being displayed(See Table 1 on page 3)Table 4After a fault has been selected and the enter-button is pushed continuously, the date and time is displayed whenthe fault occurred.3.3.3 Maintenance interval menuIn the timer menu the following timers can be checked:ParameterMeaningRunning hoursTotal running hours is being displayedLoaded hoursTotal loaded hours is being displayedAir filter timeRemaining hours to air filter service is being displayedOil filter timeRemaining hours to oil filter service is being displayedOil separator time Remaining hours to oil separator service is being displayedOil change timeRemaining hours to oil change is being displayedLubricationMotor lubricationNote: Setting and resetting the displayed values can be done in the service setting menu.Table 5Worthington-Creyssensac 09/0462 205 930 11 Page 7