Hydraulic Filter Division Europe - Ditech AS
Hydraulic Filter Division Europe - Ditech AS
Hydraulic Filter Division Europe - Ditech AS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Hydraulic</strong> and Heavy Duty Filtration andContamination Control
Parker Hannifin CorporationThe ParkerBrand PromiseParker is the global leader in motionand control technologies, partneringwith its customers to increase theirproductivity and profitability.A global Fortune 300 companywith customers in 48 countries,Parker Hannifin is the world’sleading supplier of hydraulic,pneumatic, and electromechanicalsystems andcomponents. Customers relyon Parker for engineeringexcellence, world-class manufacturingand outstandingcustomer service to providecomprehensive applicationsolutions that are second to none.• More than USD 10.3 billionin sales• 298 plants worldwide• 12,000 distributors• 449,000 customers• Serving 1,200 distinct markets• Listed as PH on the New YorkStock ExchangeLet Parker become part of yourdesign team. Whether you need todevelop new products, redesignexisting applications, or designcompletely new systems, Parkeroffers unparalleled engineeringexpertise.Parker Filtration’s global reputation as a reliablesupplier of superior filtration products is the resultof a focused and integrated development andmanufacturing system.Parker Filtration consolidates quality filtrationproducts, manufactured by process filtration, airand gas filtration and separation, fuel conditioningand filtration, hydraulic and lubrication filtration,fluid power products and fluid condition monitoringequipment into one broad-based range that coversmany markets and most applications, as detailedhere.As the leader in the motionand control industry, Parkerstrivestobeourcustomers’trusted partner. These relationshipsare cultivated by listeningclosely to our customers andrepeatedly providing them withvalue measured in any currency:saved time, reduced waste,gained efficiency, expandedoutput and increasedprofitability.Together for the first time in one catalogue areParker Filtration’s hydraulic and heavy duty filtrationproducts and the proven range of fluid contaminationmonitoring products.
ContentsFiltration and Reservoir Products1. Low pressure filtersETF Series – Tanktop mounted filters (Previously 1200) 15TTF 1. Series Low pressure – Tanktop filters mounted filters 21STF Series – Return Line filters 33BGT Series – Tanktop mounted filters 39IN-AGB Series – In-tank mounted filters 51Tanktopper Series I, II & III – Tanktop mountedwith integrated air breather 61SR Series – Suction and return filters 69PT Tank Top Mounted filters 77Maxiflow Series – Spin-on filters 85ATZ Series – Suction filters 912. Medium pressure filters12<strong>AS</strong> Series 9715/40/80CN Series 10345M/45M Eco Series (Previously 1145) 1113. High pressure filters15P/30P Series 117100P Series (Previously H600 and H1000) 123EPF iprotect ® Series 129EADPF and EMDPF Series 13118/28/38P Series 13370/70 Eco Series (Previously 7000) 14122PD/32PD Series 1494. <strong>Filter</strong> IndicatorsFMU Indicators and Pressure Indicators 1555. Heavy Duty filtration productsGS Series - Medium pressure in-line filters 162GA Series - Medium pressure in-line filters 166BGAH Series - Medium pressure in-line filters 172BGLS Series - Low pressure in-line filters 178SF1040 Series - Low pressure in-line filters 182Eco 130 Series - Medium pressure filters 186DF2145 Series - Duplex filters 194DFBO Series - Duplex in-line filters 198DF40 Series - Duplex in-line filters 202DF2089 Series - Duplex filters 206DF2110 Series - Duplex filters 210DF2050 Series - Duplex filters 214DF2035 Series - Duplex filters 218DFH2060 Series - Duplex filters 222DF2070 Series - Duplex filters 2266. Par-TestPar-Gel Water Removal Elements 2317. Portable filtration systemsGuardian ® 235Filtration Unit 23910MFP Series 245PVS Series – Models 185, 600, 1200, 1800 and 2700 2538. PAR FITInterchange replacement element range 2639. Marine PAR FITInterchange replacement element range 27810. Par-GelPar-Gel Water Removal Elements 28111. Reservoir equipmentReservoirsCo-polymer and steel reservoir solutions 287Environmental Air <strong>Filter</strong>s and Disposable BreathersEAB Series 294ABL Series 297Triceptor 300Glass-Filled Nylon Air BreathersIP65 Rated Filler Breathers 304Filler Breathers 306Screw-On Type Air Breathers 307Metal Filler BreathersFiller Breathers (Metal) 310Lockable Filler Breathers 312Air <strong>Filter</strong>sSpin-On Air Breathers 313Fluid Level IndicationFluid Level Temperature Gauges 316Reservoir Float & Level Switches 319Fluid Power ProductsSuction Elements 322Diffusers 324Inline <strong>Filter</strong>s 325Drive Couplings 326Multiclamp 328Inline Check Valves 333Single Station Gauge Isolator Valves 33463mm Dia. Pressure Gauges 335100mm Dia. Pressure Gauges 336Fluid Condition Monitoring andFlowmeters12. Fluid condition monitoringicountLCM20 Contamination Monitor 337Universal Bottle Sampler 344icountBS Bottle Sampler 349Single Point Sampler 357System 20 Sensors and Monitors 360MCM20 Autoremote Monitor 365icountPD Particle Detector 369icount Monitoring System 379H2Oil – Water in Oil Monitor 381Moisture Sensor Range 385Oilcheck Monitor 39213. Fuel Hydrocarbon MonitoringicountACM20 Lab Unit 395icountPD Z2 Particle Detector (ATEX Approved) 399icountACM20 Z2 Particle Counter (ATEX Approved) 40114. Transducers & transmittersAsic ‘Performer’ 40715. Flowmeters & monitorsLoFlow – Oil and Water Flowmeters 411Easiflow – Meters and Flowswitches 413Dataflow –4to20mA and Pulse Output Flow Transmitters 414Dataflow Compact – Inline Flow Transmitter 415Flowline – Oil and Water Calibrated Flowmeters(Brass and Aluminium) 416Flowline – Oil and Water Calibrated Flowmeters(Stainless Steel) 417Flowline – Flowswitches 418<strong>Hydraulic</strong> Test Equipment 419Flow Products – For Compressed Air Applications 420316. Guide to contamination controlGuide to Contamination Control 421Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Low Pressure <strong>Filter</strong>sGlobal products as identified are offeredworldwide through all Parker locationsand utilize a common ordering code.ETF Series – Tanktop mounted return line filters - Page 15• ETF utilizes a re-inforced co-polymer head equipped with 2 return ports.• Quick-release cover design.• Flow from inside to out.• Maximum pressure 6 bar. Maximum flow 175 l/min.TTF Series – Tanktop mounted return line filters - Page 21• TTF features pre-filtration by means of a magnet column.• Full flow bypass with low hysteresis.• Maximum pressure 10 bar. Maximum flow 500 l/min.• Options include a filling port in the filter cover and second return port.• Patented LEIF ® elements safeguard filtration quality.STF Series – Return line filters - Page 33• ‘In-to-out’ filtration design means contaminated oil cannot leak back into the system• magnetic pre-filtration• Cast iron filter head assembly• multiple port configuration• flows up to 500 L/min• 10 bar maximum working pressure• optional airtight diffusers• LEIF ® low enviromental impact filter elements as standardBGT Series – Tanktop mounted return line filters - Page 39• BGT features pre-filtration by means of a magnet column.• <strong>Filter</strong> heads with multiple ports available.• Full flow bypass with low hysteresis.• Maximum pressure 10 bar. Maximum flow 2400 l/min.• Patented LEIF ® elements safeguard filtration quality.IN-AGB Series – In–tank mounted return line filters - Page 51• IN-AGB features a bypass construction with low hysteresis.• Magnetic pre-filtration and a high dirt-holding capacity.• Wide range of diffusers including airtight options.• Flow rates from 30 l/min to 2400 l/min.• Patented LEIF ® elements safeguard filtration quality.Tanktopper Series l, ll & lll – Tanktop mounted with integrated air breather - Page 61• Tanktopper offers a total filtration solution with integrated air breather.• In-to-Out filtration plus gauge and switch options.• Maximum pressure 10 bar. Maximum flow 650 l/min.• Patented LEIF ® elements safeguard filtration quality.SR Series – Tanktop mounted suction and return filters - Page 69• SR capable of feeding filtered oil under positive pressure to the suction side of the boost pump.• <strong>Filter</strong>s both open and closed loop oil systems through one filter.• Maximum pressure 10 bar. Maximum flow 250 l/min.• SR uses patented LEIF ® elements to safeguard filtration quality.PT Tank Top Mounted filters - Page 77• Return line filter for direct mounting in copolymer reservoirs.• Patented designs safeguard filtration quality.• In to out flow avoids re-contamination of the system.• Flow capability up to 400 l/min.Maxiflow Series – Spin-on filters - Page 85• Maxiflow full flow filters for suction or return applications.• Available with a variety of integrated and add-on indicators.• Maximum pressure 10 bar. Maximum flow 360 l/min.• High quality filter medium.4Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Low Pressure <strong>Filter</strong>s continuedATZ Series – Submersible suction filters - Page 91• ATZ submersible suction filters locate below tank oil level.• Pre-filtration takes place by means of a magnetic column.• Maximum flow 300 l/min.• In-to-Out filter stops contaminated oil leaking back into the system.Medium Pressure <strong>Filter</strong>s12<strong>AS</strong> Series – Coreless Spin-on filters - Page 97• 12S features a patented, re-usable coreless Ecoglass lll element.• Replaceable bowl design for easy element removal.• Maximum pressure 35 bar.• An eco filter solution for hydraulic systems15/40/80CN Series – Medium pressure filters - Page 103• CN utilizes a cast aluminium head and bowl.• Excellent fatigue pressure ratings.• Maximum pressure 70 bar. Maximum flow 600 l/min.• An economic ‘multi-purpose’ filter solution.45M/45M Eco Series – Medium pressure filters - Page 111• 45M utilizes a cast iron head and steel bowl.• Solves the problem of protecting system components at lower pressures.• Maximum pressure 40 bar. Maximum flow 260 l/min.• An ideal filter series for harsh environments.High Pressure <strong>Filter</strong>s15P/30P Series – High pressure filters - Page 117• 15P/30P utilizes a compact aluminium housing with 2 head sizes and 2 bowl lengths.• Microglass lll filter media.• Maximum pressure 207 bar. Maximum flow 200 l/min.• A quality filter for better control and long component life.100P Series – High pressure filters - Page 123• 100P design, only the bowl end-cap is removed on element change.• Microglass lll glassfibre media is standard.• Maximum pressure 414 bar. Maximum flow 1000 l/min.• An ideal solution where space is at a premium.EPF, EADPF and EMDPF Series - Page 129• A new generation of high pressure filters.• Manifold heads contribute to cost-effective integration of filters in a system.• Rated at 450 bar for flows up to 700 l/min.• Multiple bypass settings up to 7 bar.18/28/38P Series – High pressure filters - Page 133• Multiple bypass settings up to 7 bar.• 18/28/38P features a range of head and bowl sizes and connection options.• Microglass lll glassfibre media is standard.• Maximum pressure 414 bar. Maximum flow 700 l/min.5Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
High Pressure <strong>Filter</strong>s continued70/70 Eco Series – High pressure filters - Page 141• 70/70 Eco features a range of head and bowl sizes and connection options.• Microglass lll glassfibre and Ecoglass lll media is available.• Maximum pressure 420 bar. Maximum flow 450 l/min.• A proven filter offering high levels of system protection.Global products as identified are offeredworldwide through all Parker locationsand utilize a common ordering code.22PD/32PD Series – High pressure duplex filters - Page 149• 22PD/32PD utilizes a duplex design with integrated balancing valve and vent ports.• Microglass lll glassfibre media is standard.• Maximum pressure 210 bar. Maximum flow 260 l/min.• Designed to offer continuous operation during element change.<strong>Filter</strong> IndicatorsFMU Δp – Hndicators and pressure indicators - Page 155• The FMU range of filter condition indicators, designed for use on a wide range of Parker filters• Accurate visual, electronic or electrical filter condition feedback.• Maximum pressure 420 bar.• Mobile, industrial and marine applications.Heavy Duty Filtration ProductsGS Series – Medium pressure in-line filters - Page 162• GS utilizes a cast iron housing design making it suitable for marine engine rooms and industrialgearbox installations.• Microglass III or a cleanable metal mesh option.• 3 different housing sizes can be specified.• Maximum pressure 40 bar. Maximum flow 350 l/min.GA Series – Medium pressure in-line filters - Page 166• GA utilizes an ‘in to out’ design which eliminates contamination returning into the system.• Microglass lll, Ecoglass lll media or a cleanable metal mesh option.• Maximum pressure 30 bar. Maximum flow 230 l/min.• An ideal solution for metal cutting equipment.BGAH Series – Medium pressure in-line filters - Page 172• BGAH is an ideal in-line solution for straight pipelines.• Microglass lll, Ecoglass lll media or a cleanable metal mesh option.• Patented LEIF ® elements safeguard filtration quality.• Maximum pressure 25 bar. Maximum flow 500 l/min.• Highly customizable for differing applications.BGLS Series – Low pressure in-line filters - Page 178• BGLS utilizes an aluminium upper housing and steel lower housing.• Low weight with high capacity solution.• Maximum pressure 10 bar. Maximum flow 2000 l/min.• Ideal for lube systems, wind turbines and hydraulic presses• Patented LEIF ® elements safeguard filtration quality.• Microglass III, Ecoglass III media or a cleanable metal mesh option.SF1040 Series – Low pressure in-line filters - Page 182• SF1040 features a strong welded steel housing with DN80 or DN100 connections.• Microglass lll glassfibre media or a cleanable metal mesh option.• Maximum pressure 10 bar. Maximum flow 1400 l/min.• Ideal for gas and high flow systems.6Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Heavy Duty Filtration Products continuedEco 130 Series – Medium pressure filters - Page 186• Eco 130 is a versatile, modular filter system.• Ability to bank multiple filters together in a ‘duplex’ format.• Maximum pressure 30 bar. Maximum flow 1000 l/min.• Microglass lll, Ecoglass lll media or a cleanable metal mesh option.DF2145 Series – Duplex filters - Page 194• DF2145 duplex utilizes a robust cast iron housing for secure, continuous filtration.• Microglass lll, Ecoglass lll media or a cleanable metal mesh option.• Maximum pressure 30 bar. Maximum flow 80 l/min.• A high specification filter for fuel, lube and hydraulic systems.DFBO Series – Duplex in-line filters - Page 198• DFBO duplex brings Parker Racor FBO filters to the marine engine room.• Ensuring efficient water separation at all times.• Maximum pressure 10 bar. Maximum flow 115 l/min.• 2 bowl lengths, easy service and no special tools required.DF40 Series – Duplex in-line filters - Page 202• DF40 duplex utilizes a cast iron and steel design ideal for marine applications such as engine roominstallations.• Microglass lll, Ecoglass lll media or a cleanable metal mesh option.• Maximum pressure 40 bar. Maximum flow 200 l/min.• Ideal for fuel, lube and hydraulic fluid systems.DF2089 Series – Duplex filters - Page 206• DF2089 duplex utilizes a cast iron housing with ‘in to out’ flow to hold back contamination evenduring element change.• Microglass lll or a cleanable metal mesh option.• Maximum pressure 40 bar. Maximum flow 350 l/min.• A high specification filter for fuel, lube and hydraulic systems.DF2110 Series – Duplex filters - Page 210• DF2110 duplex is a ‘heavy-duty’ performer with high in to out flow to hold back contamination evenduring element change.• Microglass lll or a cleanable metal mesh option.• Maximum pressure 20 bar. Maximum flow 1200 l/min.• DN80 PN25 connections.DF2050 Series – Duplex filters - Page 214• DF2050 duplex features a cast iron housing with high dirt holding capacity yet low pressure drop.• Microglass lll or a cleanable metal mesh option.• Maximum pressure 20 bar. Maximum flow =>1000 l/min.• DN80 PN25 connections.DF2035 Series – Duplex filters - Page 218• DF2035 duplex utilizes an aluminium housing providing a lightweight, high capacity filter solution.• Microglass lll or a cleanable metal mesh option.• Maximum pressure 8 bar. Maximum flow 600 l/min.• Ideal for industrial gear and diesel engine lube systems.7Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Heavy Duty Filtration Products continuedDFH2060 Series – Duplex filters - Page 222• DFH2060 duplex slim design provides maximum performance with minimum installation height.• Microglass lll or a cleanable metal mesh option.• Maximum pressure 10 bar. Maximum flow 2200 l/min.• Ideal for industrial and heavy duty diesel engine lube systems.DF2070 Series – Duplex filters - Page 226• DF2070 duplex design provides a welded housing with cast iron change over valve.• Microglass lll or a cleanable metal mesh option.• Maximum pressure 10 bar. Maximum flow 1800 l/min.• Ideal for diesel engine and high flow industrial lube systems.Par-Test• The Par-Test service is a complete laboratory analysis service.• Analysis is performed on a small quantity of fluid supplied by the customer.• Parker Filtration has 3 <strong>Europe</strong>an laboratory locations.• The resulting Par-Test report is comprehensive in its detail.Global products as identified are offeredworldwide through all Parker locationsand utilize a common ordering code.Portable Filtration SystemsGuardian ® Portable filtration system - Page 235Filtration Unit - Page 239• Guardian ® is designed to ‘clean’ new oil and deliver it to a system.• Carries out a clean up of used fluid to its original condition.• Maximum pressure 3.4 bar. Maximum flow 15 l/min.• <strong>Filter</strong>s petroleum based oils, water emulsions and diesel fuels.• Filtration unit offers both permanent and offline fluid cleaning where higher levels ofcontamination are expected.• Lightweight design. Spin-on 10 micron Abs. element.• Maximum pressure 6 bar. Maximum flow 15 l/min.• Robust construction.10MFP <strong>Hydraulic</strong> trolley - Page 245• 10MFP hydraulic trolley is the ideal way to pre-filter and transfer fluids into reservoirs or toclean up a system.• Heavy-duty frame but still lightweight and portable.• Maximum flow 38 l/min.• Par-Gel water removal elements available.PVS Series-Models 185, 600, 1200, 1800 and 2700 - Page 253• PVS draws water contaminated fluid out of a system.• Removes water content and returns the ‘clean’ fluid to the reservoir.• Maximum flow 170 l/min (PVS2700).• Reduce the catastrophic results of water contamination.PAR FITInterchange replacement element range - Page 263• PAR FIT elements are manufactured to the same exacting standards as Parker original elementsusing Microglass III and Ecoglass III media.• Interchange elements for Pall, Hydac, Mahle, Internormen, MP Filtri, Donaldson and over 140 moremanufacturers.• Cross reference information available for over 30,000 part numbers.• Marine PAR FIT options available.8Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Water removal filter elements - Page 281• Par-Gel elements control water related problems in hydraulic power and lubrication systems.• Helps reduce component wear and system downtime.• Increases system efficiency and machine productivity.• Reduces the chance of catastrophic system failure.Reservoir EquipmentEnvironmental air filters and disposable breather - Page 294• EAB Series – air flows up to 1500 l/min. Visual gauge option.• ABL Series – 3 micron Abs. LEIF ® element. 2 sizes.• Triceptor – easy to fit, disposable when the silica gel turns to pink.Glass-filled nylon air breathers - Page 304• Moulded in non-corrodible, glass-filled nylon – strong and light.• Single hole, 6 hole and 3 hole installation.• Screw-on breather range – G1/2 and G3/4 options.• Compact range – G1/4, G3/8, R1/2 and R3/4 options.Metal filler breathers - Page 310• Metal filler breathers – pressurized threaded type.• Metal filler breathers – unpressurized threaded type.• <strong>Filter</strong> flange type.• Lockable range for reservoir security and oil protection.Par-Gel Air filters - Page 313Fluid level indication - Page 316Fluid Condition Monitoring• 2-minute test procedure• High capacity air breathers to remove airborne contamination.• Disposable, 5 micron nominal quality elements.• Models – 700, 1500, 1700 and 3000 l/min.• Ideal for high flow heavy contamination systems.• 3 sizes of fluid level/temperature gauge. 2 hole mounting.• 76mm, 127mm and 254mm mounting centres.• Adjustable float switches – 3 lengths available.• Capacitive level switch designed to give a low level alarm.icountLCM20 portable particle counter - Page 337• Multi-standard ISO, N<strong>AS</strong> and <strong>AS</strong>4059 cleanliness reporting.• Data entry, data graphing and integral printer.• Single Point Samplers (SPS’s) are fingertip operated control valves that connect icountLCM20and H2Oil into a system.Universal Bottle Sampler - Page 344• The UBS advances LCM20’s flexibility into Lab environments.• Simple operation. Efficient test procedure.• Clean and contamination free sampling.9Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Fluid Condition Monitoring continuedicountBS bottle sampler - Page 349• icountBS provides quick sample bottle analysis with variable test time options from 15seconds and volume capacities from 10ml.• Repeatable and re-producible results performance, calibration carried out to ISO11171 viaISO11943 principles.• Design concept allows for portability with DC and rechargeable battery power options built-in.• Sample tube self-cleaning sleeve minimizing contamination crossover.• No specific bottle required:– Maximum size = 75mm dia. x 150mm high.– Maximum volume = 250ml.icount Mini-Lab - Page 355• icount Mini-Lab is the portable solution to fluid contamination bottle sampling, using theicountBS bottle sampler.• Cleanliness awareness and monitoring control is only an oil sample away with the easy,3-step/2 minute fluid analysis process.• On-screen, full 256 colour, backlit STN transmissive.• A cost-effective alternative to external laboratory service.• Interactive software provides templates for printing 2-page analysis reports including ISOcompliant results, raw data for full-sweep, particle size counts and graphs.System 20 sensors and monitors - Page 360• 3 sizes of inline System20 sensor for pressures up to 420 bar.• Analogue monitor utilizes 3 day-glow gauges with protective cover.• EM20 electronic monitor with full digital display and 300 test memory.• For use with all mineral oils, water and water/oil emulsions.Global products as identified are offeredworldwide through all Parker locationsand utilize a common ordering code.MCM20 autoremote monitor - Page 365• MCM20 online continuous particle counting ensures constant system monitoring withindefined parameters.• Calibration carried out to ISO1171 via ISO11943 principles. Multi-standard ISO and N<strong>AS</strong>reporting including full count/100 ml. detection at size ranges.• Interactive handset options available for direct test sequencing, change test parameters andlast test results.• PC/PLC controlled.• Can be pre-set to carry out tests at specific intervals.• Connects permanently to a System20 sensor via 2 metre hose assembly.icountPD particle detector - Page 369• icountPD provides online and independent monitoring of system contamination trends.• Laser diode light obscuration technology for repeatable results.• Calibration to approved, on-line methods.• Early warning LED or digital display indicators for low, medium and high contamination levels.• Moisture RH% indicator option for real time water ingress awareness before saturationdamage occurs.• Fully PC/PLC integration technology such as:– RS232/485, 0-5V, 4-20mA, CANBUS (J1939).H2Oil – water in oil monitor - Page 381• H2Oil is a two-channel, non-dispersive absorption spectrometer, designed to measure thelevel of water content polluting oil.• Totally portable unit without the need for mains power.• 90 second test time and 500 test memory.• Data entry and on-board printer.10Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Fluid Condition Monitoring continuedMS moisture sensor range - Page 385• MS moisture sensors provide fast, reliable and accurate inline detection of moisture in fluids• Technology developed for preventative maintenance programmes.• MS150 ‘low pressure’ suction line/reservoir applications. Temperature outputs. 10 bar maximumoperating pressure.• MS200 ‘Programmable’ sensor monitoring and reporting relative humidity (RH), moisture content in oils.• MS300 ‘Intrinsically safe’ sensor ATEX certified for use in hazardous Zone environments.Fuel Condition MonitoringicountACM20 contamination monitor - Page 395• icountACM20 monitors aviation fuel contamination to DEFSTAN 91-91 Jet A-1 fuel specification.• A proven product that adopts Energy Institute Test Method IP 564.• 2-minute test procedure. Multi-standard ISO cleanliness reporting.• On-board, case-mounted pump means direct monitoring at a fuel storage tank for example is possible.icountPD Z2 – Fuel particle detector - Page 399• Independent monitoring of system contamination trends.• Assembled in an approved and certified Stainless Steel enclosure to comply withATEX Directive 94/9/EC.• Can be used in explosive and hazardous areas.• Mineral oil versions available.icountACM20 Z2 - Page 401• icountACM20 Z2 is assembled in an approved and certified Stainless Steel enclosure.• Complies with ATEX Directive 94/9/EC and EN50 021 requirements.• Designed for use in explosive and hazardous areas including offshore and mining applications.• Has all the features of an icountLCM20 and an icountACM20.Transducers and TransmittersAsic ‘Performer’ - Page 407• A quality range of transducers and transmitters with pressure ratings - 25, 60, 100, 250, 400 and 600bar.• One-piece body and diaphragm machining ensures long-term stability.• All Stainless Steel construction.• Cost-effective solution in many industry applications.Flowmeters and MonitorsFlowmeters, Flowswitches and Flow Monitors - Page 411• LoFlow oil and water flowmeters. 10 bar max. working pressure.• Easiflow meters and Flowswitches. Work in any plane. Flows from 1 to 150 l/min.• Dataflow 4-20mA and pulse output flow transmitters and Dataflow Compact inline flow transmitter.• Flowline oil, water and air calibrated flowmeters and flowswitches available in brass or Stainless Steel.• <strong>Hydraulic</strong> Test Units for the speedy diagnosis of hydraulic circuit faults with flow ranges from 2 to 360l/min.11Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Important changes to our productordering informationStandard Product Tables and a Product ConfiguratorParker Filtration undertook a reviewof its part numbering with a view tostandardising on a common part numberstyle for all Filtration products. As a resultof the many acquisitions we have madeover the past 10 years, it became clear tous that there was a need to standardiseThe examples below using theBGT Series Ordering Information,are included to explain how theStandard products are presented inthe Ordering Information section ofthe catalogue and also how the newProduct Configurator works.ExplanationExample 1. The Standard ProductsTableWe have created a new catalogueordering code and included in this tableare details of these new part numbers.Alongside this we have put the partnumber that has been superceded fromprevious catalogues. It is our intentionthat all items printed in the StandardExample 1. The Standard Products Tableon a clear format for our part numbers.Accordingly, in this catalogue, you willfind the new part number system withboth a configurator and a supersedescross reference relating to previous partnumbers, issued in earlier editions of ourProducts Table will be available from ourcentral warehouse for ex-stock delivery.Example 2. The Product Configurator2a. As part of our new catalogue orderingcode we have introduced an 8-box partnumber configurator. This configuratorfeatures items, which are marked in boldand are on a shortened delivery time.With this in mind we would ask that whenmaking a selection using the configuratoryou select those items in bold to ensurethe shortest lead-time.2b. The configurator has been designed tocover not only the various models we offerbut also different micron ratings, indicatoroptions and port connections.generic catalogues. In the event that theprevious reference you use is not shown inthis catalogue, could we ask you to pleasecontact our <strong>Europe</strong>an Product InformationCentre. Contact details are on the back ofthis catalogue.2c. Should you find that what youhave selected is not available in theconfigurator, please feel free to call our<strong>Europe</strong>an Product Information Centre(EPIC) to see if that option can be madeavailable. Contact details are availableon the back of this catalogue.Green shaded graphs and orderinginformationWhere pressure drop graphs andordering information are shown witha green tint, these options are ‘Eco’options and environmentally friendly.Part numberSupersedes Flow Model Element Media Seals Indicator Bypass Ports Included Replacement(l/min) number length rating (μ)settingsoptions elementsBGT1210QLBPER323 BGTS500-S2 TXWL8C-10 T B15 M 500 BGT500 Length 12 10 Nitrile Plugged 1.5 Bar (22 Psi) 2"SAE-3000 PSI Diffuser type T 937859QBGT1220QLBPER323 BGTS500-S2 TXWL8C-20 T B15 M 500 BGT500 Length 12 20 Nitrile Plugged 1.5 Bar (22 Psi) 2"SAE-3000 PSI Diffuser type T 937868QBGT1510QLBPER483 BGTS1000-S3 TXWL12-10 T B15 M 1000 BGT1000 Length 15 10 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937862QBGT1520QLBPER483 BGTS1000-S3 TXWL12-20 T B15 M 1000 BGT1000 Length 15 20 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937865QBGT1710QBPER483 BGTS2000-S3 TXW14-10 T B15 M 2000 BGT2000 Length 17 10 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937772QBGT1720QBPER483 BGTS2000-S3 TXW14-20 T B15 M 2000 BGT2000 Length 17 20 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937805QNote: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.SupersedesTXWL8L-10TXWL8L-20TXWL12-10TXWL12-20TXW14-10BTXW14-20BExample 2. The Product ConfiguratorConfigurator examples filter including LEIF ® elementBox 1 Box 2 Box 3 Box 4BGT 15 05QL BBox 5S1Box 6EBox 7R48Box 8CConfigurator examples filter including conventional elementBox 1BGTBox 218Box 302QBox 4BBox 5S4Box 6EBox 73R20Box 84Box 1CodeBGTBox 2<strong>Filter</strong> typeHousingCode3-390 l/min113-500 l/min124-600 l/min134-800 l/min144-1000 l/min154-1500 l/min164-2000 l/min174-2400 l/min18Box 3ElementDisposable elementLEIF ® elementDegree of filtrationGlass fibreMicroglass III (for disposable elements)Cellulose Ecoglass III (for Leif ® elements)Nom. rating10C02Q05Q10Q02QL 05QL 10QL20Q20QLWire meshAbs. rating040WBox 4Box 5Seal typeIndicatorSeal materialCodeCodeNitrileB Pressure gauge, setting 1.2 bar, M10x1G1FluorelastomerV Pressure gauge, setting 1.2 bar, G 1 /8 for dual port headG2NeopreneN Pressure switch 42V, 1.2 bar setting, NO/NC, M10x1S1Pressure switch 42V, 1.2 bar setting, NO with G 1 /8 BSPS2Pressure switch 42V, 1.2 bar setting, NC with G 1 /8 BSPS3Pressure switch 250V, NO/NC with G 1 /8S4Pressure switch 220V, NO/NC with M10S5No indicator, indicator ports not machinedNNo indicator, indicator port R pluggedPNo indicator, indicator ports L + R pluggedP2Other settings for indicators / gauges on requeston requestNote: For all dual head ports for BGTS apply G 1 /8 connection for indicatorsBox 7Box 8<strong>Filter</strong> connectionOptionsPortsCode Options2" SAE BGT-3R32 No diffuser required3" SAE BGT-4R48 Diffuser type T with perforated plate area1x2" SAE flanged + 2x1 1 /4" SAE flanged for BGT-3R32M Diffuser type P without perforated plate area3x1 1 /4" SAE flanges + 1x 1 /2" SAE for BGT-43R20 Diffuser with integrated hose connectionNo magnetsDipstickPlugged filling portDiffuser type T and no magnetsDiffuser type P and no magnetsDiffuser type T, no magnets, plugged filling portDiffuser type P, no magnets, plugged filling portOther combinationsBox 6Bypass valveBypass valveCode0.8 barB1.5 barE2.0 bar for BGT-3 seriesHBlocked bypassXOther bypass settingson requestCode134on request568ABCDon request12Highlights Key (Denotes part number availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available within four weeksParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Parker’s Value PropositionParker’s ValuePropositionParker is the leading filtrationsupplier worldwide. We have apowerful reputation, unparalleledbreadth of products, and worldclasscustomer service. However,Parker’s greatest distinguishingbenefits can be found in its ValueProposition. Parker believes thatit takes more than our greatproducts, competitive prices, andon-time delivery to satisfy customerdemands. It takes a commitment toprovide exceptional value.At Parker, value is not acommodity. It is the result ofpersonal relationships built aroundthe customer’s use of Parker’sextensive resources. Our customerservices include:• Design-Engineering Support• System Design• Components Selection• New Product Development• Custom-ComponentManufacturing• Assemblies and Kits• Sub-System Configuration• Global Support and Service• ISO CertificationInstalling Parker Filtration patented filter assemblies such as theSuction and Return Series and LEIF ® (Low Environmental Impact<strong>Filter</strong>) elements can provide the end user and OEM with somepositive benefits:• LEIF ® can provide increased OEM spares business.• Guaranteed Parker quality with every replacementfilter element.• Supports OEM end user loyalty to Parker elements.• Support aftermarket sales and machineryperformance.• Parker patented elements promote quality andreliability to end users.13Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Providing the products and serviceour customers expectA Global Product RangeWith this catalogue we offer our customers an easy way tofind technical specification and ordering information aboutParker hydraulic filtration, fluid contamination monitoring andfluid power products.Products shown in this catalogue have a broad range ofapplications. Our filter products are particularly designedfor hydraulic and lubrication systems and transmissions.The fluid power products are also used in many industriesand applications.Typical applications can vary from road sweepers, forklift trucks, agriculture harvesting machines, grass cuttingequipment, lorry mounted cranes, forestry equipment, pressbrakes, industrial power units, waste management trucks,drilling equipment, marine, military equipment, paper mills,water treatment and filtration systems.For more information about our products send your inquiryto your nearest sales location, see contact information at theback of this catalogue.Important information on product ordering andpart numbersParker Filtration has recently undertaken a review of its partnumbering with a view to standardising on a common partnumber style for all Filtration products. As a result of the manyacquisitions we have made over the past 10 years, it becameclear to us that there was a need to standardise on a clearformat for our part numbers.Accordingly, in this new catalogue you will find the new partnumber system with a ‘product configurator’ and a supersedesreference relating to previous part numbers issued in earliereditions of our generic catalogues. In the event that theprevious reference you have is not shown in this catalogue,could we ask you to please contact our Epic Centre, details ofwhich are on the back cover of this catalogue.For additional information and an example explained, turn topage 12.BSP ports offered in this catalogue conform to ISO228.Supply chain management, service and supportParker is addressing operation efficiency by expanding thesystematic approach called ‘Lean Manufacturing. Value streamanalysis, flow manufacturing, reduced set-ups, manufacturingcell flexibility and fool-proofing systems are all contributing tothe continuous improvement in our manufacturing sites. ‘Lean’is also expressed in our premier customer service and secondto-nonecustomer partnerships in supply chain management.Engineering and manufacturing excellenceParker Filtration’s Filtration Group <strong>Europe</strong> (FGE) manufacturingfocus is driven by a number of key elements that affectall areas of the business. People productivity, customersatisfaction, production throughput, quality and leanachievements are the drivers that help the FGE achieveISO9001, QS9000, ISO9001 and ISO14001.Significant investment by our parent Parker HannifinCorporation continues to give FGE flexible manufacturingsystems, automated test equipment and excellent laboratorytest facilities.New product development programmes and on-going productimprovement initiatives are vital elements in maintaining aproduct range that meets customer demands for quality,reliability and engineering excellence.R & D resources at the Parker Filtration locations in the UK,Finland and the Netherlands are both complimentary andcomprehensive. Including, as examples, Multipass TestInstallations, fatigue test unit, cleanliness service (waterdetection, special analysis, particle counting and analysis), 3Dworkstations, Thermal Cycle Test Chamber, Salt Spray andHumidity chambers.Parker Hannifin Corporation herewith declares that Parker<strong>Hydraulic</strong> Filtration products are intended to be incorporatedinto machinery covered by Directive 89/392/EEC, as amendedand that the following harmonised standards have beenapplied; EN982, EN292-1, EN292-2We furthermore declare that, machinery incorporating Parker<strong>Hydraulic</strong> Filtration products, is not allowed to be put intoservice until the machinery has been found and declared to bein conformity with the provisions of Directive 89/392/EEC andwith national implementing legislation.In line with our policy of continuous product improvement,Parker Hannifin (UK) Ltd reserve the right to alter product dataand specification without notice. This does not affect yourstatutory rights.Notes:1. Within this catalogue, each product has been allocated an operating temperature andpressure range.2. The range listed for each filter is dedicated by the materials of construction and thecapability of the seals specified.3. Consideration should also be given to the characteristics of the system fluid whenspecifying filters for extreme temperature and/or pressure applications.4. The use of non-Parker replacement elements and spares may invalidate your warranty.14Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ETF SeriesTanktop Mounted Return Line <strong>Filter</strong>smax. 175 I/min -6barAn economic returnline filterImproved system protectionThe ETF Series utilizes a re-inforcedco-polymer head equipped with 2return ports and quick-release cover.Maximum pressure 6 bar. Maximumflow 175 l/min. An economic returnline filter that has been used andproven in many hydraulic filtrationapplications.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• ETF utilizes a re-inforced co-polymer head equipped with 2return ports.• Quick-release cover design.• Flow from inside to out.• Maximum pressure 6 bar. Maximum flow 175 l/min.• An economic return line filter for hydraulic systems.www.parkerhfde.com15Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ETF SeriesTanktop Mounted Return Line <strong>Filter</strong>sFeatures & BenefitsFeaturesCo-polymer headMultiple return line portsQuick release coverOptional magnetic pre-filtrationIn-to-Out filtrationQuick response bypass with lowhysteresisOptional funnelAdvantagesCompact profile, lightweight and durableFlexibility related to return line hose(s)arrangementNo tools required to release the filter coverRemoves ferro particles, even during bypassconditionsAll captured contamination retains inside theelementReduction of bypass period due to lowhysteresisOnly a small part of the total flow isbypassing the elementEnsures that oil enters the tank under theoil levelBenefitsLess weight, smaller envelope andcleaner appearanceMore compact solutions can berealisedEasy change of filter elementImproved fluid cleanliness levelsNo recontamination of system duringchange of elementsImproved protection of systemSignificant reduction of oil foamingTypical ApplicationsLorry mounted cranesAgricultural equipmentContainer hook loadersThe Parker Filtration ETF SeriesLow Pressure <strong>Filter</strong>sFor tank top mounting installation. The ETF Seriesutilises a reinforced co-polymer head equippedwith two return ports and quick release cover. Thisfilter represents an economic solution for hydraulicsystems with nominal flows up to 175 l/min.16Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Max. 6 bar.Assembly:Tank top mounted.Connections:Threads G1” + G1” (ISO 228), port Bsupplied as plugged connection.<strong>Filter</strong> housing:Glass reinforced co-polymer.Funnel made from steel.Seal material:Nitrile.Operating temperature range:-20° to +80°C.Bypass valve:Opening pressure 1.6 bar.<strong>Filter</strong> element:Conventional style element with steel end caps.Degree of filtration:Determined by multipass test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimum fatigue life is achieved.Filtration media:Microglass III.Element collapse rating:8 bar (ISO 2941).Indicator options:Setting 1.0 bar.Fluid compatibility:Suitable for use with mineral and vegetable oils, and somesynthetic oils. For other fluids, please consult Parker Filtration.Installation DetailsETF LengthDimensionsmm (inches)AB12344A4BETF45ETF60ETF90ETF120ETF140ETF17582(3.22)106(4.17)150(5.90)200(7.87)260(10.24)350(13.78)100(3.94)125(4.92)177(6.97)225(8.86)300(11.81)375(14.76)mm(inches)78.5(3.09)30(1.18)BG1AØ87(3.42)70(2.75)Hole cut out Ø=90(3.54)Ø9(0.35)Port DR=63 (7,48)62(2.44)Port CPort A89(3.50)107(4.21)70(2.75)17Port B89 (3.50)107 (4.21)Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ETF SeriesTanktop Mounted Return Line <strong>Filter</strong>sIndicator DetailsVisual pressure indicatorCode G2mm (inches)48 Vdc electrical indicator 1.2 barCode S2/S3mm (inches)250 VAC electrical indicator 1.2 barCode S4mm (inches)G 1 /831(1.22)Rotatingpart 360°38(1.49)30 (1.18) x30 (1.18)40(1.57)67(2.64)HEX 2456(2.20)44 (1.73)C32NO1NC74(2.91)32(1.26)10(0.39)1/8 BSPT10 (0.39)HEX 27(1.06)1/8 BSPTFixed partOption Description Connection/Voltage Wiring Part numberG2Visual indicator1.0 barN/AN/AFMUG2FBMG02LS2/S3Electrical indicator1.0 bar42 VdcmaxSelect either normally open (NO)or normally closed (NC)FMUS2FBMG02LorFMUS3FBMG02LNormally open contactsS4Electrical indicator1.0 bar250 VACmax1 NC2 NO3 CFMUS4FBMG02LNormally closed contacts18Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop CurvesThe recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:Δp =(Dp32 x viscosity of medium used) / 32cSt.ETF45 (Element length code 1) ETF60 (Element length code 2)Flow (US GPM)Flow (US GPM)Δp (bar)0 13 26 39 53 66 791.014.50.90.80.70.60.50.40.30.20.10.002Q05Q10Q20Q00 25 50 75 100 125 150 175 200 225 250 275 300Flow (l/min)13.111.610.28.77.35.84.42.91.5Δp (PSID)Δp (bar)0 13 26 39 53 66 791.014.50.90.80.70.60.50.40.30.20.10.002Q05Q10Q20Q0 25 50 75 100 125 150 175 200 225 250 275 300Flow (l/min)13.111.610.28.77.35.84.42.91.50Δp (PSID)ETF90 (Element length code 3) ETF120 (Element length code 4)Flow (US GPM)Flow (US GPM)Δp (bar)01.013 26 39 53 66 7914.50.913.102Q 05Q10Q0.811.60.710.20.68.70.50.40.30.20.10.020Q00 25 50 75 100 125 150 175 200 225 250 275 300Flow (l/min)7.35.84.42.91.5Δp (PSID)Δp (bar)0 13 26 39 53 66 791.014.50.90.80.70.60.50.40.30.20.10.002Q05Q20Q10Q00 25 50 75 100 125 150 175 200 225 250 275 300Flow (l/min)13.111.610.28.77.35.84.42.91.5Δp (PSID)ETF140 (Element length code 4A)ETF175 (Element length code 4B)Flow (US GPM)Flow (US GPM)Δp (bar)0 13 26 39 53 66 791.014.50.90.80.70.60.50.40.30.20.10.002Q05Q10Q20Q00 25 50 75 100 125 150 175 200 225 250 275 300Flow (l/min)13.111.610.28.77.35.84.42.91.5Δp (PSID)Δp (bar)0 13 26 39 53 66 791.014.50.90.80.70.60.50.40.30.20.10.002Q10Q05Q20Q00 25 50 75 100 125 150 175 200 225 250 275 300Flow (l/min)13.111.610.28.77.35.84.42.91.5Δp (PSID)Note: All pressure drop curves above show total pressure drop. i.e. they are combined housing and element curves.19Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ETF SeriesTanktop Mounted Return Line <strong>Filter</strong>sOrdering InformationStandard products tablePart numberSupersedesFlow(l/min)ModelnumberElementlengthMediarating (μ)Seals IndicatorBypasssettingsIncludedoptionsReplacementelementsETF210QBP2FG164 FK1230.Q010.BK16.GX16 60 ETF60 Length 2 10 Nitrile Plugged 1.6 Bar (23 Psi) 2xG1 (one port plugged) Diffuser type P 937950QETF220QBP2FG164 FK1230.Q020.BK16.GX16 60 ETF60 Length 2 20 Nitrile Plugged 1.6 Bar (23 Psi) 2xG1 (one port plugged) Diffuser type P 937951QETF310QBP2FG164 FK1240.Q010.BK16.GX16 90 ETF90 Length 3 10 Nitrile Plugged 1.6 Bar (23 Psi) 2xG1 (one port plugged) Diffuser type P 937952QETF320QBP2FG164 FK1240.Q020.BK16.GX16 90 ETF90 Length 3 20 Nitrile Plugged 1.6 Bar (23 Psi) 2xG1 (one port plugged) Diffuser type P 937953QNote: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.PortsSupersedesFC1230.Q010.XSFC1230.Q020.XSFC1240.Q010.XSFC1240.Q020.XSProduct configuratorConfigurator example of an ETF Series filterBox 1 Box 2 Box 3 Box 4ETF310QBBox 5S2Box 6FBox 7G16Box 81Box 1CodeETFBox 4Seal materialNitrileBox 2HousingETF 1-45ETF 1-60ETF 1-90ETF 1-120ETF 1-140ETF 1-175Seal type<strong>Filter</strong> typeCodeBBox 5Code12344A4BBox 3Disposable elementIndicatorPressure gauge, setting 1.2 bar, G 1 /8Pressure switch 42V, 1.2 bar setting, NO with G 1 /8 BSPPressure switch 42V, 1.2 bar setting, NC with G 1 /8 BSPPressure switch 250V, 1.2 bar setting NO/NC with G 1 /8No indicator, indicator ports L+RpluggedOther settings for indicators / gauges on requestDegree of filtrationGlassfibre mediaMicroglass III (for disposable elements)02Q05QCodeG2S2S3S4P2on requestBox 610Q20QBypass valveBypass valve1.6 barOther bypass settingsCodeFon requestBox 7<strong>Filter</strong> connectionPortsG1"(BSP) (2 ports, one supplied asplugged connection)ßx(c)=250.0%N/AN/AN/A6CodeG16Box 8OptionsOptionsNo diffuser requiredDiffuser type P without perforated plate areaDiffuser with integrated hose connectionMagnetsDiffuser type P and magnetsOther combinationsCode14on requeston requeston requeston requestNote: ETF filters are standard supplied without magnets andincluding diffuser type PDegree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222Mediacode02Q05Q10Q20QSpare elements table02Q 05Q 10Q 20QETF1-45 937969Q 937970Q 937948Q 937949QETF1-60 937971Q 937972Q 937950Q 937951QETF1-90 937973Q 937974Q 937952Q 937953QETF1-120 937975Q 937976Q 937954Q 937955QETF1-140 937977Q 937978Q 937956Q 937957QETF1-175 937979Q 937980Q 937981Q 937982QETF Series Seal KitPart Number Description918045037 NITRILE SEAL KIT ETF 0 -4BHighlights Key (Denotes part number availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available within four weeksNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.20Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TTF SeriesTanktop Mounted Return Line <strong>Filter</strong>sMax 500 I/min - 10 barFeaturing prefiltrationby meansof a magneticcolumnExtended element life timeAN INNOVATIVE GREENFILTER FEATURINGLEIF LEIF ®The TTF Series features pre-filtrationby means of a magnet column anda quick response bypass with lowhysteresis. Maximum pressure 10 bar.Maximum flow 500 l/min. A secondreturn port is an available option as isa filling port in the filter cover.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• TTF features pre-filtration by means of a magnet column.• Quick response bypass with low hysteresis.• Maximum pressure 10 bar. Maximum flow 500 l/min.• Options include a filling port in the filter cover and secondreturn port.• Patented LEIF ® elements safeguard filtration quality.• Flow from inside to out.www.parkerhfde.com21Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TTF SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 500 I/min - 10 barFeatures & BenefitsFeatures10 bar rated filterCast aluminium headLEIF ® elementsMagnetic pre-filtrationIn-to-Out filtrationHigh level of customisationQuick response bypass with lowhysteresisStandard or customised funnelAdvantagesCan be utilised for severe return line applicationsCompact profile, lightweight and durablePatented element safeguards the use ofgenuine partsRemoves ferrous particles, even during bypassconditionsAll captured contamination retains inside theelementDedicated system-matched solutions can beeasily made availableReduction of bypass period due to low hysteresisOnly a small part of the total flow is bypassingthe elementEnsures that oil enters the tank under the oil levelBenefitsReduced downtime due to prematurefilter failuresLess weight, smaller envelop andcleaner appearanceGuaranteed quality of filtrationContributes to ISO 14001 certificationImproved fluid cleanliness levelsExtended element life timeNo recontamination of system duringchange of elementsImproved integration of filter in systemcombined with lower initial system costsImproved protection of systemSignificant reduction of oil foamingTypical ApplicationsWaste management trucksMobile cranesPower packsWheeled loadersDrilling equipmentThe Parker Filtration TTF SeriesReturn Line <strong>Filter</strong>sTTF tank top mounted return line filters feature pre-filtration bymeans of a magnet column and a quick response bypass with lowhysteresis. Thanks to the “In-to-Out” filter principle, contaminated oilcannot leak back into the system. TTF filters are available in versionscapable of handling flow rates up to 500 l/min. They can operate upto a maximum working pressure of 10 bar. Optional filling port in filtercover, second return port and customised diffusers can be specified.22Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationOperation pressure:Max. 10 bar.Assembly:Tank top mounted.Connections:Threaded BSP ports.Flanged ports on request.<strong>Filter</strong> housing:Aluminium head and cover.Seal material:Nitrile, fluoroelastomer, neoprene.Operation temperature range:Seal material Nitrile: -40 to +100°C.Seal material Fluoroelastomer: -20 to+120°C.Bypass settingOpening pressure 0.8 / 1.5 or 2 bar.Other settings on request.Degree of filtration:Determined by multipass test according toISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that theoptimum fatigue life is achieved.Filtration media:Microglass III and Ecoglass III for LEIF ® elements.Also available 10μm cellulose and 40μm stainless steel mesh.Element collapse rating:10 bar (ISO 2941)Pressure indicator options:Setting 0.7 or 1.2 bar.Other settings on request.Visual pressure gauge.Electrical pressure switch.Options:Diffuser type P (straight pipe, no perforated plate area)Diffuser type T (with closed diffuser end cap and with perforated platearea, recommended when oil entry in reservoir is close to the reservoirbottom or to ensure oil entry under the reservoir oil level)Magnetic pack:Standard. TTF400 and 500 are standard supplied without magnetsFilling port in cover: (optional)Plugged.<strong>Filter</strong> element:LEIF ® element with reusable metal element sleeve.Optional conventional style element with steel end caps.The LEIF ® element is patented and safeguards the use of genuine parts.Note: LEIF ® element can be used with mineral and HEES type oils.For other fluids consult Parker Filtration.LEIF ® contributes to ISO 14001 quality standards.TTF9a9b134567810111213TTF sealkit: No. 4+7+12Ref. No. Description1 4 Flange nut3 1 Cover4 1 Cover-seal5 1 Top-spring6 1 Insert7 1 Insert-seal8 1 Element9a 0-1 Indicator9b 0-3 Plug M10x110 0-3 Unit-ring11 1 Housing12 1 Gasket13 1 Sleeve14 1 Funnel/diffuser15 1 O-ring16 1 Bypass set14151623Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TTF SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 500 I/min - 10 barTTF Lengths 2-5 Single portTTF length Type2 TTF 1-603 TTF 1-904 TTF 1-1205 TTF 1-150Dimensions in mmPort option h h1 ØD ØD1 H1 H2 H3 b R R1 R2 K FP131 190 190175 190 190G 3 /4, G1 28 73 Ø90 Ø9368 60 63 10 4xØ9225 330 330325 330 330G 1 /2TTF Lengths 6-10 Single portTTF length Type6 TTF 2-1707 TTF 2-2308 TTF 2-3009 TTF 2-40010 TTF 2-500Dimensions in mmPort option h h1 ØD ØD1 H1 H2 H3 b R R1 R2 K FP223 318303 318G1 1 /4,G1 1 /2 36 92 Ø132 Ø136 508 538523 538563 578318318538 90 83 87.5 12 4xØ11 G153857824Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TTF Lengths 2-5 Dual portH2H1TTF length2344A54BTypeTTF 1-60TTF 1-90TTF 1-120TTF 1-140TTF 1-150TTF 1-175Port option A-B h h1 ØD ØD1 H1 H2 b R R1 R2 K FP131 190175 170G1-G1 30 74 Ø88 Ø91225 220285 280325 320376 37090 83 87.5 12 4xØ11 G1Dimensions in mmTTF Lengths 6-10 Dual portTTF length Type6 TTF 2-1707 TTF 2-2308 TTF 2-3009** TTF 2-40010** TTF 2-500Dimensions in mmDual Port option A-B h h1 ØD ØD1 H1 H2 H3 R R1 R2 K FP223 318G1 1 /2 -G1 1 /2G2 - G1 1 /2SAE 1 1 /2 -G1 1 /246 107 Ø132 Ø136303508523318538538563 578318318538 83 87.5 12 4xØ11 G153857825Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TTF SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 500 I/min - 10 barPressure Drop CurvesThe recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp32 x viscosity of medium used) / 32cSt.TTF60 (Element length code 2)Flow (US GPM)TTF90 (Element length code 3)Flow (US GPM)0 5 11 16 21 2622902Q1.521.81.41.210 8 162402Q313920.317.414.5Δp (bar)114.505Q10Q0.57.320Q000 20 40 60 80 100Flow (l/min)Δp (PSID)Δp (bar)0.80.60.405Q10Q0.220Q2.9000 30 60 90 120 150Flow (l/min)11.68.75.8Δp (PSID)TTF120 (Element length code 4)Flow (US GPM)TTF150 (Element length code 5)Flow (US GPM)0 8 16 24 31 39 471.420.302Q1.217.401.416 311.24720.302Q17.4114.5114.5Δp (bar)0.80.60.40.205Q10Q20Q000 30 60 90 120 150 180Flow (l/min)11.68.75.82.9Δp (PSID)Δp (bar)0.811.60.605Q8.70.45.810Q0.220Q2.900 60 1200180Flow (l/min)Δp (PSID)26Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop Curves (cont.)The recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp32 x viscosity of medium used) / 32cSt.TTF170 (Element length code 6)Flow (US GPM)TTF230 (Element length code 7)Flow (US GPM)Δp (bar)02.513 26 39 53 66 79 9336.321.5102Q2921.814.505Q0.510Q7.320Q0 0 50 100 150 200 250 3000350Flow (l/min)TTF300 (Element length code 8)Flow (US GPM)Δp (PSID)Δp (bar)0 13 26 39 53 66 79 92 106 119114.50.902Q13.105Q0.811.60.710.20.68.70.57.310Q0.45.80.34.40.22.920Q0.11.500 50 100 150 200 250 300 350 4000450Flow (l/min)TTF400 (Element length code 9)Flow (US GPM)Δp (PSID)Δp (bar)01.61.413 26 39 53 66 79 92 10602Q119 13223.220.31.2117.414.50.811.605Q0.60.40.220Q8.710Q5.82.90 0 50 100 150 200 250 300 350 400 4500500Flow (l/min)TTF500 (Element length code 10)Flow (US GPM)Δp (PSID)Δp (bar)01.81.613 26 39 53 66 79 92 106 119 132 14526.123.21.402Q20.31.2117.414.50.80.605Q 11.68.70.40.210Q5.820Q2.900 50 100 150 200 250 300 350 400 450 5000550Flow (l/min)Δp (PSID)0 13 26 39 53 66 79 92 106 119 132 145 1591.623.202Q1.420.31.217.4Δp (bar)10.80.60.40.205Q20Q14.511.68.710Q5.82.9Δp (PSID)0 0 500100 150 200 250 300 350 400 450 500 550 600Flow (l/min)27Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TTF SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 500 I/min - 10 barPressure Drop Curves (cont.)TTF60 (Element length code 2)Cellulose & stainless steel mediaFlow (US GPM)0 4 8 12 16 20 240.121.74TTF90 (Element length code 3)Cellulose & stainless steel mediaFlow (US GPM)0 8 16 24 310.121.74Δp (bar)0.10.080.060.040.0210C040W1.451.160.870.580.29Δp (PSID)Δp (bar)0.10.080.060.040.0210C040W1.451.160.870.580.29Δp (PSID)0 0 15 30 45 60 75090Flow (l/min)TTF120 (Element length code 4)Cellulose & stainless steel mediaFlow (US GPM)0 0030 60 90 120Flow (l/min)TTF150 (Element length code 5)Cellulose & stainless steel mediaFlow (US GPM)0 8 16 24 31 39 47 560.142.0310C0.121.7400.128 16 24 31391.740.11.45Δp (bar)0.10.080.060.040.02040W1.451.160.870.580.29Δp (PSID)Δp (bar)0.080.060.040.0210C040W1.160.870.580.29Δp (PSID)0 0030 60 90 120 150 180 210Flow (l/min)0 0030 60 90 120150Flow (l/min)TTF170 (Element length code 6)Cellulose & stainless steel mediaFlow (US GPM)TTF230 (Element length code 7)Cellulose & stainless steel mediaFlow (US GPM)0 8 16 24 31 39 47 560.121.740 13 26 39 53 66 790.142.03Δp (bar)0.10.080.060.0410C040W1.451.160.870.58Δp (PSID)Δp (bar)0.120.10.080.060.0410C040W1.741.451.160.870.58Δp (PSID)0.020.290.020.290 0030 60 90 120 150 180 210Flow (l/min)0 0050 100 150 200 250 300Flow (l/min)TTF300 (Element length code 8)Cellulose & stainless steel mediaFlow (US GPM)0 13 26 39 53 66 79 92 1060.142.030.120.110C1.741.45Δp (bar)0.080.060.041.160.87040W0.58Δp (PSID)0.020.290 0050 100 150 200 250 300 350 400Flow (l/min)28Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TTF SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 500 I/min - 10 barIndicator OptionsIndicator PS pressure switchProtective capwith dual cable ductfor 1, 7-2, 3mm diameter cableIndicator PS NO/NC pressure switchProtective coverNormally open contacts2 375Amp 6.3x8terminals1Switch74Normally closed contacts5827 A/F1 = COM.2 = N.C.3 = N.O.5524 A/F99M10x1G 1 /8 (BSP)Ø30.5Ø28Elec.ratingThread connectionElec.connectionProtectionCodeTTFSpecifications42V/4AM10x1AMP 6.3x0.8 terminals + protective capIP65 (with cap) terminals IP00FMUS1EBMM10L (Switch)Indicator Connection / <strong>Filter</strong> Head MatrixPort(s) <strong>Filter</strong> headISO 228-G 3 /4" (BSP) (TTF length 2,3,4 and 5)ISO 228-G1" (BSP)ISO 228-G1 1 /4" (BSP) (TTF length 6 and larger)2xISO 228-G1 1 /4" (BSP) (TTF length 6 and larger)ISO 228-G1 1 /2"(BSP) (TTF length 6 and larger)2xISO 228-G1 1 /2"(BSP) (TTF length 6 and larger)1 1 /2" SAE-3000 PSI (TTF length 6 and larger)1 1 /2" SAE-3000 PSI (2nd port) + G1 1 /2" (TTF length 6 and larger)G2" (TTF length 6 and larger)G2"+G1 1 /2" (TTF length 6 and larger)Indicator ThreadM10M10M10G1/8"M10G1/8"G1/8"G1/8"G1/8"G1/8"SpecificationsElec.rating42V/2AThread connection G 1 /8Elec.connection AMP terminal 6.3x0.8ProtectionIP65 (terminal IP00)Switch typeNO or NCCodeFMUS2EBMG02L (NO switch)FMUS3EBMG02L (NC switch)Visual indicator 1.2 barM10: code FMUG1EBPM10LG 1 /8: codeFMUG2EBPG02LOrdering InformationStandard products tablePart numberSupersedesTTF310QLBP2EG121 TTF90-G 3 /4 TXWL3-10 B15 MMTTF320QLBP2EG121 TTF90-G 3 /4 TXWL3-20 B15 MMTTF510QLBP2EG161 TTF125-G1 TXWL3E-10 B15 MMTTF520QLBP2EG161 TTF125-G1 TXWL3E-20 B15 MMTTF610QLBP2EG203 TTF170-G1 1 /4 TXWL4-10 T B15 MMTTF620QLBP2EG203 TTF170-G1 1 /4 TXWL4-20 T B15 MMTTF810QLBP2EG243 TTF300-G1 1 /2 TXWL5A-10 T B15 MMTTF820QLBP2EG243 TTF300-G1 1 /2 TXWL5A-20 T B15 MMTTF1010QLBP2HG24A TTF500-G1 1 /2 TXWL5C-10 T B20 MM NMGTTF1010QLBP2HG24A TTF500-G1 1 /2 TXWL5C-20 T B20 MM NMGFlow(l/min)9090125125170170300300500500ModelnumberElementlengthTTF90 Length 3TTF90 Length 3TTF125 Length 5TTF125 Length 5TTF170 Length 6TTF170 Length 6TTF300 Length 8TTF300 Length 8TTF500 Length 10TTF500 Length 10Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above.10201020102010201020Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrilePluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedBypasssettings1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)2.0 Bar (29 Psi)2.0 Bar (29 Psi)PortsG 3 /4G 3 /4G1G1G1 1 /4G1 1 /4G1 1 /2G1 1 /2G1 1 /2G1 1 /2IncludedoptionsNoneNoneNoneNoneDiffuser type TDiffuser type TDiffuser type TDiffuser type TDiffuser type TDiffuser type TReplacementelements937878Q937877Q937852Q937875Q937853Q937874Q937855Q937872Q937857Q937870QSupersedesTXWL3-10TXWL3-20TXWL3E-10TXWL3E-20TXWL4-10TXWL4-20TXWL5A-10TXWL5A-20TXWL5C-10TXWL5C-2029Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TTF SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 500 I/min - 10 barOrdering Information (cont.)Product configuratorConfigurator example of a TTF Series filterBox 1TTFBox 29Box 305QLBox 4VBox 5S3Box 6HBox 7L24Box 81Box 1CodeTTFBox 2<strong>Filter</strong> typeHousingTTF 1-60TTF 1-90TTF 1-120TTF 1-120TTF 1-120TTF 1-150TTF 2-170TTF 2-230TTF 2-300TTF 2-400TTF 2-500Code2344A4B5678910Box 3Element mediaDisposable elementLEIF ® elementCelluloseNom. rating10CDegree of filtrationGlass fibreMicroglass III (for disposable elements)Ecoglass III (for Leif ® elements)02Q02QL05Q05QL10Q10QL20Q20QLWire meshAbs. rating040WBox 4Seal materialNitrileFluorelastomerNeopreneSeal typeCodeBVOn requestBox 5IndicatorPressure gauge, setting 1.2 bar, M10x1*Pressure gauge, setting 1.2 bar, G 1 /8 for dual head portsPressure switch 42V, 1.2 bar setting, NO/NC, M10x1*Pressure switch 42V, 1.2 bar setting, NO with G 1 /8 BSP*Pressure switch 42V, 1.2 bar setting, NC with G 1 /8 BSP*Pressure switch 250V, NO/NC with G 1 /8*Pressure switch 220V, NO/NC with M10*No indicator, indicator ports not machinedNo indicator, indicator ports L+RpluggedOther settings for indicators / gauges on requestCodeG1G2S1S2S3S4S5On requestP2on requestBox 6Bypass valveBypass valve0.8 bar1.5 bar2.0 bar for TTF seriesBlocked bypassOther bypass settingsCodeBEHXon requestNote: * HEAD H<strong>AS</strong> PLUGGED INDICATOR CONNECTIONS L+RNote: Also see the table indicator Connection/<strong>Filter</strong> Head Matrix on page 29Box 7<strong>Filter</strong> connectionPortsISO 228-G 3 /4" (BSP) (TTF length 2,3,4 and 5)ISO 228-G1" (BSP) (TTF length 2,3,4 and 5)ISO 228-G1 1 /4" (BSP) (TTF length 6 and larger)2xISO 228-G1 1 /4" (BSP) (TTF length 6 and larger)ISO 228-G1 1 /2" (BSP) (TTF length 6 and larger)2xISO 228-G1 1 /2" (BSP) (TTF length 6 and larger)1 1 /2" SAE-3000 PSI (TTF length 6 and larger)1 1 /2" SAE-3000 PSI (2nd port) + G1 1 /2" (TTF length 6 and larger)G2" (TTF length 6 and larger)G2"+G1 1 /2" (TTF length 6 and larger)CodeG12G16G202G20G242G24On requestLD24On requestGM32Box 8OptionsOptionsNo diffuser requiredDiffuser type T with perforated plate areaDiffuser type P without perforated plate areaDiffuser with integrated hose connection for TTFlengths 2, 3 and 4No magnetsPlugged filling portDiffuser type T and no magnetsDiffuser type P and no magnetsDiffuser type T, no magnets, plugged filling portDiffuser type P, no magnets, plugged filling portAir tight diffuser type TAir tight diffuser type POther combinationsCode134On request58ABCDGHon requestßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222Mediacode02Q/02QL05Q/05QL10Q/10QL20Q/20QLHighlights Key (Denotes part number availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available withinfour weeks30Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering Information (cont.)Supersedes Spare Element table (TXWL & PXWL replaced by 900000 number)TTF60Part number spare elementTTF90Part number spare elementTTF120Part number spare elementTTF125Part number spare elementTTF170Part number spare elementTTF230Part number spare elementTTF300Part number spare elementTTF400Part number spare elementTTF500Part number spare elementTXWL2-2937823QTXWL3-2937824QTXWL3D-2937825QTXWL3E-2937826QTXWL4-2937827QTXWL5-2937828QTXWL5A-2937829QTXWL5B-2937830QTXWL5C-2937831QTXWL2-5937880QTXWL3-5937879QTXWL3D-5937825QTXWL3E-5937849QTXWL4-5937848QTXWL5-5937847QTXWL5A-5937846QTXWL5B-5937845QTXWL5C-5937844QTXWL2-10937881QTXWL3-10937878QTXWL3D-10937851QTXWL3E-10937852QTXWL4-10937853QTXWL5-10937854QTXWL5A-10937855QTXWL5B-10937856QTXWL5C-10937857QTXWL2-20937882QTXWL3-20937877QTXWL3D-20937876QTXWL3E-20937875QTXWL4-20937874QTXWL5-20937873QTXWL5A-20937872QTXWL5B-20937871QTXWL5C-20937870QSupersedes Spare Element table (TXW & TXX replaced by 900000 number)TTF60Part number spare elementTTF90Part number spare elementTTF120Part number spare elementTTF125Part number spare elementTTF170Part number spare elementTTF230Part number spare elementTTF300Part number spare elementTXX2-10-B937721TXX3-10-B937722TXX3D-10-B937723TXX3E-10-B937724TXX4-10-B937725TXX5-10-B937726TXX5A-10-B937727TXW2-2-B937751QTXW3-2-B937750QTXW3D-2-B937749QTXW3E-2-B937748QTXW4-2-B937747QTXW5-2-B937746QTXW5A-2-B937745QTXW2-5-B937754QTXW3-5-B937755QTXW3D-5-B937756QTXW3E-5-B937757QTXW4-5-B937758QTXW5-5-B937759QTXW5A-5-B937760QTXW2-10-B937787QTXW3-10-B937786QTXW3D-10-B937785QTXW3E-10-B937784QTXW4-10-B937783QTXW5-10-B937782QTXW5A-10-B937781QTXW2-20-B937790QTXW3-20-B937791QTXW3D-20-B937792QTXW3E-20-B937793QTXW4-20-B937794QTXW5-20-B937795QTXW5A-20-B937796QST2-40-B937820ST3-40-B937819ST3D-40-B937818ST3E-40-B937817ST4-40-B937816ST5-40-B937815ST5A-40-B937814TTF Series Seal KitTTF <strong>Filter</strong> connectionsNitrile Seal KitPortsPart NumberISO 228-G 3 /4” (BSP) (TTF length 2,3,4 and 5) 2049010012ISO 228-G1” (BSP) (TTF length 2,3,4 and 5) 2049010012ISO 228-G1 1 /4” (BSP) (TTF length 6 and larger) 20490100122xISO 228-G1 1 /4” (BSP) (TTF length 6 and larger) 918045035ISO 228-G1 1 /2” (BSP) (TTF length 6 and larger) 20490100132xISO 228-G1 1 /2” (BSP) (TTF length 6 and larger) 9180450351 1 /2” SAE-3000 PSI (TTF length 6 and larger) 9180450351 1 /2” SAE-3000 PSI (2nd port) + G1 1 /2” (TTF length 6 and larger) 918045035G2” (TTF length 6 and larger) 918045035G2”+G1 1 /2” (TTF length 6 and larger) 91804503531Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Notes32Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
STF SeriesReturn Line <strong>Filter</strong>sMax. 500 l/min - 10 barWhen safety is amustWhere the use of aluminium isrestricted in applications such asmarine and industrial, the STF returnline filter series provides an idealsolution to hydraulic system designersand specifiers.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• ‘In-to-out’ filtration design means contaminated oil cannot leakback into the system• magnetic pre-filtration• Cast iron filter head assembly• multiple port configuration• flows up to 500 L/min• 10 bar maximum working pressure• optional airtight diffusers• LEIF ® low enviromental impact filter elements asstandard33Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
STF SeriesReturn Line <strong>Filter</strong>sMAX 500 I/min - 10 barFeatures & BenefitsFeatures10 bar rated filterCast iron headLEIF ® elementsMagnetic pre-filtrationIn-to-Out filtrationHigh level of customisationQuick response bypass with lowhysteresisStandard or customised funnelAdvantagesCan be utilised for severe return line applicationsRobust designPatented element safeguards the use ofgenuine partsRemoves ferrous particles, even during bypassconditionsAll captured contamination retains inside theelementDedicated system-matched solutions can beeasily made availableReduction of bypass period due to low hysteresisOnly a small part of the total flow is bypassingthe elementEnsures that oil enters the tank under the oil levelBenefitsReduced downtime due to prematurefilter failuresConvenient and effective solution forapplications where aluminium is notallowedGuaranteed quality of filtrationContributes to ISO 14001 certificationImproved fluid cleanliness levelsExtended element life timeNo recontamination of system duringchange of elementsImproved integration of filter in systemcombined with lower initial system costsImproved protection of systemSignificant reduction of oil foamingTypical ApplicationsMarine power packSteel millsMining equipmentDrilling equipmentThe Parker Filtration STF SeriesReturn Line <strong>Filter</strong>sSTF Tank top mounted return filters feature pre-filtration bymeans of a magnet column and a bypass with low hysteresis.Thanks to the “In-to-Out” filtration principle, contaminated oil cannotleak back into the system. The STF filter has a casted iron filter headassembly, making it ideal for marine and industrial applications werethe use of aluminium is restricted. The filter head with multiple ports,capable of handling flow up to 500 l/min at 10 bar working pressure,represents an easy and effective way of integrating return line filtrationwith power packs. Optional airtight diffusers are standard to avoid airingress in the return line.34Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationOperation pressure:Max. 10 barAssemblyTank top mountedConnectionsSAE flangeThreaded BSP ports<strong>Filter</strong> housing and coverCast Iron (GGG40)Seal material:Nitrile, FluorelastomerOperating temperature:Seal material Nitrile: -40°C to +100°CSeal material Fluoroelastomer: -20°C to+120°CBypass settingOpening pressure 0,8 / 1,5 / 2,0 barDegree of filtrationDetermined by multipass test in accordanceto ISO16889Flow fatigue characteristics<strong>Filter</strong> media is supported so that theoptimum fatigue life is achievedFiltration mediaMicroglass III and Ecoglass III for LEIF® elementsAlso available 10 μm cellulose and 40 μm stainless steel meshElement collapse pressure10 bar (ISO 2941)Pressure indicator optionsSetting 0,7 and 1,2 barVisual pressure gaugeElectrical pressure switchOptionsDiffuser type P (straight pipe, no perforated plate area)Diffuser type T (with closed diffuser end cap and with perforated plate area,recommended when oil entry in the reservoir is close to the bottom or to ensure oilenters the reservoir under the oil levelMagnetic packStandard, only not included for STF 400 and 500<strong>Filter</strong> elementLEIF® element with reusable metal element sleeveOptional conventional style element with steel end capsThe LEIF® element is patented and safeguards the use of genuine parts.Note:LEIF® element can be used with mineral and HEES type oilsFor other fluids consult Parker FiltrationLEIF® element contributes to ISO14001 quality standards STF Without DiffuserSTF Length Type H16 STF170 2237 STF230 3038 STF300 5089 STF400 52310 STF500 563STF With DiffuserSTF Length Type H16 STF170 3057 STF230 3058 STF300 5109 STF400 52510 STF500 575 35Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
STF SeriesReturn Line <strong>Filter</strong>sMAX 500 I/min - 10 barPressure Drop CurvesThe recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp32 x viscosity of medium used) / 32cSt.STF170 (Element length code 6)Flow (US GPM)STF230 (Element length code 7)Flow (US GPM)Δp (bar)02.513 26 39 53 66 79 9336.321.5102Q2921.814.505Q0.510Q7.320Q0 0 50 100 150 200 250 3000350Flow (l/min)STF300 (Element length code 8)Flow (US GPM)Δp (PSID)Δp (bar)0 13 26 39 53 66 79 92 106 119114.50.902Q13.105Q0.811.60.710.20.68.70.57.310Q0.45.80.34.40.22.920Q0.11.500 50 100 150 200 250 300 350 4000450Flow (l/min)STF400 (Element length code 9)Flow (US GPM)Δp (PSID)Δp (bar)01.61.413 26 39 53 66 79 92 10602Q119 13223.220.31.2117.414.50.811.605Q0.60.40.220Q8.710Q5.82.90 0 50 100 150 200 250 300 350 400 4500500Flow (l/min)STF500 (Element length code 10)Flow (US GPM)0 13 26 39 53 66 79 92 106 119 132 145 1591.623.202Q1.420.3Δp (PSID)Δp (bar)01.81.613 26 39 53 66 79 92 106 119 132 14526.123.21.402Q20.31.2117.414.50.80.605Q 11.68.70.40.210Q5.820Q2.900 50 100 150 200 250 300 350 400 450 5000550Flow (l/min)STF170 (Element length code 6)Cellulose & stainless steel mediaFlow (US GPM)0 8 16 24 31 39 47 560.121.74Δp (PSID)Δp (bar)1.210.80.60.40.20 0 5017.414.511.605Q8.710Q5.820Q 2.90100 150 200 250 300 350 400 450 500 550 600Flow (l/min)STF230 (Element length code 7)Cellulose & stainless steel mediaFlow (US GPM)Δp (PSID)Δp (bar)0.10.080.060.040.020 010C040W030 60 90 120 150 180 210Flow (l/min)STF300 (Element length code 8)Cellulose & stainless steel mediaFlow (US GPM)1.451.160.870.580.29Δp (PSID)0 13 26 39 53 66 790.142.030 13 26 39 53 66 79 92 1060.142.030.120.110C1.741.450.120.110C1.741.45Δp (bar)0.080.060.04040W1.160.870.58Δp (PSID)Δp (bar)0.080.060.041.160.87040W0.58Δp (PSID)0.020.290.020.290 0050 100 150 200 250 300Flow (l/min)0 0050 100 150 200 250 300 350 400Flow (l/min)36Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
STF SeriesReturn Line <strong>Filter</strong>sMAX 500 I/min - 10 barIndicator PS NO/NC pressure switchProtective coverNormally open contacts74Normally closed contacts5524 A/F9G 1 /8 (BSP)Ø28SpecificationsElectrical rating 42V/2AThread connection G1/8”Electrical connection AMP terminal 6.3x0.8ProtectionIP65 (terminal IP00)Switch typeNO or NCIndicator setting 1.2 bar (0.7 bar on request)CodeFMUS2EBMG02L (NO type switch)FMUS3EBMG02L (NC type switch)Visual indicator Code1.2 bar FMUG2EBPG02LLEIF Spare Element table2 micron 5 micron 10 micron 20 micronSTF170 Part number spare element 937827Q 937848Q 937853Q 937874QSTF230 Part number spare element 937828Q 937847Q 937854Q 937873QSTF300 Part number spare element 937829Q 937846Q 937855Q 937872QSTF400 Part number spare element 937830Q 937845Q 937856Q 937871QSTF500 Part number spare element 937831Q 937844Q 937857Q 937870QConventional Spare Element table Microglass III Media10 micron cellulose 2μ Microglass III 5μ Microglass III 10μ Microglass III 20μ Microglass III 40 micron stainless steel meshTTF170 Part number spare element 937725 937747Q 937758Q 937783Q 937794Q 937816TTF230 Part number spare element 937726 937746Q 937759Q 937782Q 937795Q 937815TTF300 Part number spare element 937727 937745Q 937760Q 937781Q 937796Q 93781437Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard products tablePartNumberFlow(I/min)ModelNumberElementLengthMediaRating (u)SealsIndicatorBypassSettingPortsIncludedOptionsReplacementElementsSTF810QLBP2ELC24GSTF820QLBP2ELC24GSTF1010QLBP2ELC24GSTF1020QLBP2ELC24G300300500500STF300STF300STF500STF50088101010201020NitrileNitrileNitrileNitrilePluggedPluggedPluggedPlugged1.5 Bar1.5 Bar1.5 Bar1.5 Bar11/2”SAE-flange11/2”SAE-flange11/2”SAE-flange11/2”SAE-flangeAirtight funnel typeTAirtight funnel typeTAirtight funnel typeTAirtight funnel typeT937855Q937872Q937857Q937870QProduct configuratorConfigurator example of a STF Series filterBox 1STFBox 28Box 305QLBox 4BBox 5S2Box 6EBox 7LC24Box 8GBox 1CodeSTFBox 2<strong>Filter</strong> typeHousingSTF 2-170STF 2-230STF 2-300STF 2-400STF 2-500Code678910Box 3Element mediaDisposable elementLEIF ® elementNominalCellulose10μm10CDegree of filtrationFiltration fineness absoluteLEIF ®Q3 glassfibre ßx(c) >200Q02 (2micron) Q05 (5micron)02Q05Q02QL 05QLQ010 (10micron)10Q10QLQ020 (20micron)20Q20QLStainless steel mesh40μm040WBox 4Seal materialNitrileFluorelastomerSeal typeCodeBVBox 5IndicatorPressure gauge , setting 1.2 bar, G1/8Pressure switch 42V, 1.2 bar setting, NO with G1/8 BSPPressure switch 42V, 1.2 bar setting, NC with G1/8 BSPPressure switch 250V, NO/NC with G1/8No indicator, indicator ports L+RpluggedOther settings for indicators / gauges on requestCodeG2S2S3S4P2on requestBox 6Bypass valveBypass valve0.8 bar1.5 bar2.0 bar for STF seriesBlocked bypassOther bypass settingsCodeBEHXon requestBox 7<strong>Filter</strong> connectionPorts1 1 /2” SAE-3000 PSI + G1” (2nd port)G1 1 /4” + G1” (2nd port)CodeLC24GL24Box 8OptionsOptionsNo diffuser requiredDiffuser type T with perforated plate areaDiffuser type P without perforated plate areaAirtight diffuser type T with perforatedplate areaAirtight diffuser type P without perforatedplate areaOther combinationsCode134GHon requestNote: STFsize 2-400 and 2-500 are standard supplied without magnetsßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222Mediacode02Q/02QL05Q/05QL10Q/10QL20Q/20QLHighlights Key (Denotes part number availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available withinfour weeks38Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGT SeriesTanktop Mounted Return Line <strong>Filter</strong>sMax. 2400 I/min - 10 barPatented LEIF ®elements safeguardfiltration qualityWhen high flow performanceis neededAN INNOVATIVE GREENFILTER FEATURINGLEIF LEIF ®The BGT Series features pre-filtrationby means of a magnet column and afull flow bypass with low hysteresis.Maximum pressure 10 bar. Maximumflow 2400 l/min. LEIF® elementsavailable up to 1500 l/min. Designedfor a wide range of mobile andindustrial applicationsContact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• BGT features pre-filtration by means of a magnet column.• <strong>Filter</strong> heads with multiple ports available.• Flow from inside to out.• Full flow bypass with low hysteresis.• Maximum pressure 10 bar. Maximum flow 2400 l/min.• Patented LEIF ® elements safeguard filtration quality.www.parkerhfde.com39Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGT SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 2400 I/min - 10 barFeatures & BenefitsFeatures10 bar rated filterCast aluminium headLEIF ® elementsMagnetic pre-filtrationIn-to-Out filtrationHigh level of customisationQuick response bypass with lowhysteresisStandard or customised funnelAdvantagesCan be utilised for severe return line applicationsCompact profile, lightweight and durablePatented element safeguards the use ofgenuine partsRemoves ferrous particles, even during bypassconditionsAll captured contamination retains inside theelementDedicated system-matched solutions can beeasily made availableReduction of bypass period due to low hysteresisOnly a small part of the total flow is bypassingthe elementEnsures that oil enters the tank under the oil levelBenefitsReduced downtime due to prematurefilter failuresLess weight, smaller envelop andcleaner appearanceGuaranteed quality of filtrationContributes to ISO 14001 certificationImproved fluid cleanliness levelsExtended element life timeNo recontamination of system duringchange of elementsImproved integration of filter in systemcombined with lower initial system costsImproved protection of systemSignificant reduction of oil foamingTypical ApplicationsMobile cranesExcavatorsDeck cranesFire fighting equipment<strong>Hydraulic</strong> pressesWaste balersIndustrial power unitsFork lift trucksThe Parker Filtration BGT Series Tank MountedReturn Line <strong>Filter</strong>s.BGT tanktop mounted return line filters feature pre-filtration bymeans of a magnet column and a quick response bypass with lowhysteresis. Thanks to the ‘In-to-Out’ filter principle, contaminated oilcannot leak back into the system. BGT <strong>Filter</strong>s are available in versionscapable of handling flow rates up to 2400 l/min. They can operatewith a maximum working pressure of 10 bar. LEIF ® elements areavailable for environment-friendly filtration for versions up to 1500 l/min.40Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationOperating pressure:Max. 10 bar.Assembly:Tank top mounted.Connections:Flanges SAE2”, 3”.Threaded ports and multiple ports available.<strong>Filter</strong> housing:Aluminium head and cover.Seal material:Nitrile, fluoroelastomer, neoprene.Operating temperature range:Seal material Nitrile: -40° to +100°C.Seal material Fluoroelastomer: -20° to +120°C.Bypass settingOpening pressure 0.8 / 1.5 or 2 bar.Other settings on request.Degree of filtration:Determined by multipass test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimum fatigue life is achieved.Filtration media:Microglass III and Ecoglass III for LEIF ® elements.Also available 10μm Cellulose and 40μm stainless steel mesh.Element collapse rating:10 bar (ISO 2941).Pressure indicator options:Setting 0.7 or 1.2 bar.Other settings on request.Visual pressure gauge.Electrical pressure switch.Options:Diffuser type P (straight pipe, no perforated plate area)Diffuser type T (with closed diffuser end cap and with perforated platearea, recommended when oil entry in reservoir is close to the reservoirbottom or to ensure oil entry under the reservoir oil level)Magnetic pack:Standard.Filling port in cover (optional):BGT 3 = Plugged G1 1 /4. BGT 4 = Plugged G1 1 /2.<strong>Filter</strong> element:LEIF ® element with reusable metal element sleeve.Conventional style element with steel end caps.The LEIF ® element is patented and safeguards the use ofgenuine parts.Note:LEIF ® element can be used with mineral and HEES type oils.For other fluids consult Parker Filtration.LEIF ® contributes to ISO 14001 quality standards.BGT-3 Length 11 and 12 (LEIF ® version)Ref. No. Description1 1 Nut2 1 Washer3 1 Cover4 1 Cover-seal5 1 Top-spring6 1 Housing7 1 Insert-seal8 1 Plug M10x19 1 Bonded seal10 1 Insert11 1 LEIF ® element12 1 Element sleeve13 1 Gasket14 1 O-ring15 1 Bypass set16 1 DiffuserBGT-4 Length 13 and larger (conventional element)Ref. No. Description1 1 Nut2 1 Washer3 1 Cover4 1 Cover-seal5 1 Top-spring6 1 Housing7 1 Insert-seal8 1 Plug M10x19 1 Bonded seal10 1 Insert11 1 Element seal12 1 Element13 1 O-ring14 1 O-ring15 1 Bypass set16 1 Diffuser12345678910111213141516BGT-3 (LEIF ® version)BGT-4 (conventional element)1234567891011121314151641Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGT SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 2400 I/min - 10 barSpecification (cont.)BGT-3 with diffuserCover - housetorque-load 30 Nm<strong>Filter</strong> - tanktorque-load 45 NmBM12Plug M10x1N (Pd)AFPSBGTlength B C D E F G H K L M N(Pd) P Q R S U11 BGT390 139 59 50 3 59 35 350 78 43 105 R107.5 14 13 16 3 165.512 BGT500540Multipleport connection (131) (55)(55)(110) (15)+0.5(166 )V W Kg.165 120 7.28.6Cover - housetorque-load 30 Nm<strong>Filter</strong> - tanktorque-load 45 NmBM12N (Pd)MMLØGØDBAECØQØRKBAAView A-AFlange SAE 2”Used for BGT 3S with:- 2” SAE flanged single port connectionØU100±0.5 100±0.5HM12N (Pd)MLWØVKView B-BdiffuserPØQCUsed for BGT 3S with:- Multiple port connection1x2” SAE flange + 2x1 1 /4” SAE flangesCView C-CFlange SAE 2”0+0.50Dimensions in mmBGT-3 without diffuserPlug M10x1AØGLFØDBAECKBØQAAView A-APFlange SAE 2”Used for BGT 3S with:ØR - 2” SAE flanged single port connectionSØAH1100±0.5 100±0.5M12N (Pd)LView B-Bwithout diffuserDimensions in mmPMØQCCView C-CUsed for BGT 3S with:Flange SAE 2”- Dual port connection1x2” SAE flange + 2x1 1 /4” SAE flangesKBGTlength A B C D E F G H1 K L M N(Pd) P Q R S Kg.11+0.5BGT390 165.5 0 139 59 50 3 59 35 325 78 43 105 R107.5 14 13 16 3 7.212 BGT5005158.6+0.5Multiple port connection (166.5 )(131)(55)(55)(110) (15)420Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGT-4 with diffuserPlug M10x1ØFAØDBM16Cover - housetorque-load 30 Nm<strong>Filter</strong> - tanktorque-load 45 NmBEACN (Pd)ØUHBWØVView B-Bwith diffuserBGTlength B C ØD E ØF H K L M N(Pd) P ØQ ØR S ØU ØV W Kg.13 BGT60042520.514 BGT80053523.015 BGT1000 178 67 80 37 40 640 106.4 62 170 R147.5 20 14 20 4+0.5240.5 0 240 170 25.516 BGT150092030.017 BGT2000120037.018 BGT2400120037.0Note: dimensions of BGT-2400 identical to BGT-2000. Dimensions in mmBGT-4 without diffuserPlug M10x1AØFBØDAØAH1MFlange SAE 3”View A-AØQA<strong>AS</strong>PØRCover - housetorque-load 30 Nm<strong>Filter</strong> - tanktorque-load 45 NmBN (Pd)ECMØQAB<strong>AS</strong>PLKM16LKFlange SAE 3”View A-AØRView B-Bwithout diffuserBGTlength ØA B C ØD E ØF H1 K L M N(Pd) P ØQ ØR S Kg.1314BGT600BGT80038549520.523.0+0.515 BGT1000 239.5 0 178 67 80 37 40 598 106.4 62 170 R147.5 20 14 20 4 25.5161718BGT1500BGT2000BGT24008781143114330.037.037.0Note: dimensions of BGT-2400 identical to BGT-2000. Dimensions in mm43Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGT SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 2400 I/min - 10 barSpecification (cont.)BGT F1 1 /4 manifold type - with diffuserBGTlength1314151617HBGT600L 420BGT800L 530BGT1000L 636BGT1500L 915BGT2000L118018 BGT2400L1180Dimensions in mmBGT F1 1 /4 manifold type - without diffuserBGTlength131415161718Dimensions in mmHBGT600L 385BGT800L 495BGT1000L 598BGT1500L 878BGT2000L1143BGT2400L114344Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Indicator OptionsIndicator PS pressure switchProtective capwith dual cable ductfor 1, 7-2, 3mm diameter cableIndicator PS NO/NC pressure switchProtective coverNormally open contacts75Amp 6.3x8terminals2 31Switch74Normally closed contacts5827 A/F1 = COM.2 = N.C.3 = N.O.5524 A/F99Ø30.5M10x1G 1 /8 (BSP)Ø28Elec.ratingThread connectionElec.connectionProtectionCodePressure Drop CurvesSpecifications42V/4AM10x1AMP 6.3x0.8 terminals + protective capIP65 (with cap) terminals IP00FMUS1EBMM10L (Switch)Indicator Connection / <strong>Filter</strong> Head MatrixPort(s) <strong>Filter</strong> head2" SAE BGT length 11 and 123" SAE BGT Length 13 and larger1x2"SAE Flanged +2x1 1 /4" SAE Flanged for BGT Length 11 and 123x1 1 /4" SAE Flanges + 1x 1 /2" SAE for BGT Length 13 and largerThe recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp32 x viscosity of medium used) / 32cSt.<strong>Filter</strong> housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.BGT Empty Housing 2”SAE (Length code 11 and 12)Flow (US GPM)Indicator ThreadM10M10G 1 /8"M10SpecificationsElec.rating42V/2AThread connection G 1 /8Elec.connection AMP terminal 6.3x0.8ProtectionIP65 (terminal IP00)Switch typeNO or NCCodeFMUS2EBMG02L (NO switch)FMUS3EBMG02L (NC switch)Visual indicatorM10 codeG 1 /8 code1.2 barFMUG1EBPM10LFMUG2EBPG02LBGT390 (Element length code 11)Flow (US GPM)Δp (bar)0 13 26 39 53 66 79 92 106 119 132 1450.040.580.030.020.290.01000 50 100 150 200 250 300 350 400 450 500 550Flow (l/min)BGT500 (Element length code 12)Flow (US GPM)Δp (PSID)Δp (bar)0 26 53 79 106 132 159 1851.217.402Q10.80.60.40.214.511.68.705Q5.810Q2.920Q000 100 200 300 400 500 600 700Flow (l/min)Δp (PSID)Δp (bar)0 26 53 79 106 132 159 1851.217.4102Q0.814.511.60.68.705Q0.45.810Q0.22.920Q000 100 200 300 400 500 600 700Flow (l/min)Δp (PSID)45Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGT SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 2400 I/min - 10 barPressure Drop Curves (cont.)BGT Empty Housing 3”SAE (Length 13 and larger)Flow (US GPM)BGT600 (Element length code 13)Flow (US GPM)Δp (bar)0 53 106 159 211 264 317 370 423 476 5290.040.030.020.0100 200 400 600 800 1000 1200 1400 1600 1800 2000Flow (l/min)0.580.290Δp (PSID)Δp (bar)0 26 53 79 106 132 159 185 211 2381.217.402Q10.80.605Q0.410Q14.511.68.75.80.22.920Q000 100 200 300 400 500 600 700 800 900Flow (l/min)Δp (PSID)BGT800 (Element length code 14)Flow (US GPM)BGT1000 (Element length code 15)Flow (US GPM)Δp (bar)0 53 106 159 211 264 3171.217.4102Q0.80.605Q0.410Q0.220Q00 200 400 600 800 100001200Flow (l/min)BGT1500 (Element length code 16)Flow (US GPM)14.511.68.75.82.9Δp (PSID)Δp (bar)01.253 106 159 211 264 317 37017.402Q10.80.605Q14.511.68.70.45.80.210Q2.920Q00 200 400 600 800 1000 120001400Flow (l/min)BGT2000 (Element length code 17)Flow (US GPM)Δp (PSID)0 53 106 159 211 264 317 370 4231.217.402Q114.501.2106 211 317 423 529 63517.4102Q14.5Δp (bar)0.80.605Q0.410Q11.68.75.80.22.920Q00 200 400 600 800 1000 1200 140001600Flow (l/min)Δp (PSID)Δp (bar)0.80.60.411.68.705Q5.810Q0.22.920Q000 400 800 1200 1600 2000 2400Flow (l/min)Δp (PSID)BGT2400 (Element length code 18)Flow (US GPM)01.2106 211 317 423 529 63517.402Q114.5Δp (bar)0.811.60.68.705Q0.45.810Q0.22.920Q000 400 800 1200 1600 2000 2400Flow (l/min)Δp (PSID)46Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop Curves (cellulose and stainless steel media)BGT390 (Element length code 11)Cellulose & Stainless steel mediaFlow (US GPM)BGT390 (Element length code 11)Cellulose & Stainless steel mediaFlow (US GPM)0 26 53790.071061321.020 26 53790.051061320.73Δp (bar)0.060.050.040.030.020.0110C040W0.870.730.580.440.290.15Δp (PSID)Δp (bar)0.040.030.020.0110C040W0.580.440.290.15Δp (PSID)000 100 200 300 400500Flow (l/min)000 100 200 300 400 500Flow (l/min)BGT600 (Element length code 13)Cellulose & Stainless steel mediaFlow (US GPM)BGT800 (Element length code 14)Cellulose & Stainless steel mediaFlow (US GPM)0 26 53 79 106 132 159 1850.071.020 26 53 79 106 132 159 185 2110.060.87Δp (bar)0.060.050.040.030.0210C040W0.870.730.580.440.29Δp (PSID)Δp (bar)0.050.040.030.0210C040W0.730.580.440.29Δp (PSID)0.010.150.010.1500 100 200 300 400 500 600Flow (l/min)0700000 100 200 300 400 500 600 700 800Flow (l/min)BGT1000 (Element length code 15)Cellulose & Stainless steel mediaFlow (US GPM)BGT1500 (Element length code 16)Cellulose & Stainless steel mediaFlow (US GPM)0 26 53 79 106 132 159 185 211 238 2640.060.870 53 106 159 211 264 317 370 4230.071.02Δp (bar)0.050.040.030.0210C040W0.730.580.440.29Δp (PSID)Δp (bar)0.060.050.040.030.0210C040W0.870.730.580.440.29Δp (PSID)0.01000 100 200 300 400 500 600 700 800 900 1000Flow (l/min)BGT2000 (Element length code 17)Cellulose & Stainless steel mediaFlow (US GPM)0.150.0100 200 400 600 800 1000 1200 1400Flow (l/min)0.1501600Δp (bar)0 53 106 159 211 264 317 370 423 475 528 5810.071.020.060.0510C0.04040W0.030.020.870.730.580.440.29Δp (PSID)0.010.15000 200 400 600 800 1000 1200 1400 1600 1800 2000 2200Flow (l/min)Cellulose and stainless steel mediaExample: BGT2000 <strong>Filter</strong> Element Length 17 - cellulose and stainless steel media47Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGT SeriesTanktop Mounted Return Line <strong>Filter</strong>sMAX 2400 I/min - 10 barOrdering InformationStandard products tablePart numberBGT1210QLBPER323BGT1220QLBPER323BGT1510QLBPER483BGT1520QLBPER483BGT1710QBPER483BGT1720QBPER483SupersedesBGTS500-S2 TXWL8C-10 T B15 MBGTS500-S2 TXWL8C-20 T B15 MBGTS1000-S3 TXWL12-10 T B15 MBGTS1000-S3 TXWL12-20 T B15 MBGTS2000-S3 TXW14-10 T B15 MBGTS2000-S3 TXW14-20 T B15 MFlow(l/min)5005001000100020002000ModelnumberBGT500BGT500BGT1000BGT1000BGT2000BGT2000ElementlengthLength 12Length 12Length 15Length 15Length 17Length 17Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.102010201020Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrilePluggedPluggedPluggedPluggedPluggedPluggedBypasssettings1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)Ports2"SAE-3000 PSI2"SAE-3000 PSI3"SAE-3000 PSI3"SAE-3000 PSI3"SAE-3000 PSI3"SAE-3000 PSIIncludedoptionsDiffuser type TDiffuser type TDiffuser type TDiffuser type TDiffuser type TDiffuser type TReplacementelements937859Q937868Q937862Q937865Q937772Q937805QSupersedesTXWL8L-10TXWL8L-20TXWL12-10TXWL12-20TXW14-10BTXW14-20BProduct configuratorConfigurator examples filter including LEIF ® elementBox 1BGTBox 215Box 305QLBox 4BBox 5S1Box 6EBox 7R48Box 8CConfigurator examples filter including conventional elementBox 1BGTBox 218Box 302QBox 4BBox 5S4Box 6EBox 73R20Box 84Box 1CodeBGTBox 2<strong>Filter</strong> typeHousingBGT390BGT500BGT600BGT800BGT1000BGT1500BGT2000BGT2400Code1112131415161718Box 3Element mediaDisposable elementLEIF ® elementCelluloseNom. rating10CDegree of filtrationGlass fibreMicroglass III (for disposable elements)Ecoglass III (for Leif ® elements)02Q02QL05Q05QL10Q10QL20Q20QLWire meshAbs. rating040WBox 4Seal materialNitrileFluorelastomerNeopreneSeal typeCodeBVon requestBox 5IndicatorPressure gauge, setting 1.2 bar, M10x1Pressure gauge, setting 1.2 bar, G 1 /8 for dual port headPressure switch 42V, 1.2 bar setting, NO/NC, M10x1Pressure switch 42V, 1.2 bar setting, NO with G 1 /8 BSPPressure switch 42V, 1.2 bar setting, NC with G 1 /8 BSPPressure switch 250V, NO/NC with G 1 /8Pressure switch 220V, NO/NC with M10No indicator, indicator ports not machinedNo indicator, indicator port B pluggedOther settings for indicators / gauges on requestNote: For all dual head ports for BGTS apply G 1 /8 connection for indicatorsCodeG1G2S1S2S3S4S5On requestPon requestBox 6Bypass valveBypass valve0.8 bar1.5 bar2.0 bar for BGT-3 series(length 11 and 12)Blocked bypassOther bypass settingsCodeBEHXon requestBox 7<strong>Filter</strong> connectionPorts2" SAE BGT length 11 and 123" SAE BGT Length 13 and larger1x2" SAE Flanged +2x1 1 /4" SAE Flanged for BGT Length 11 and 123x1 1 /4" SAE Flanges + 1x 1 /2" SAE for BGT Length 13 and largerHighlights Key (Denotes part number availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’product selection.Note 2: Alternate displayed part number selection will require you to contact ParkerFiltration for availability.CodeR32R48R32M3R20Note: Standard items are in stock, semi standard items are available within four weeksBox 8OptionsOptionsNo diffuser requiredDiffuser type T with perforated plate areaDiffuser type P without perforated plate areaDiffuser with integrated hose connectionNo magnetsDipstickPlugged filling portDiffuser type T and no magnetsDiffuser type P and no magnetsDiffuser type T, no magnets, plugged filling portDiffuser type P, no magnets, plugged filling portDiffuser type T, magnets and filling portDiffuser type P, magnets and filling portAir tight diffuser type TAir tight diffuser type POther combinations48Code134on request568ABCDEFGHon requestParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering Information (cont.)ßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222Mediacode02Q/02QL05Q/05QL10Q/10QL20Q/20QLBGT390Part number spare elementBGT500Part number spare elementBGT600Part number spare elementBGT800Part number spare elementBGT1000Part number spare elementBGT1500Part number spare elementSupersedes spare element tableTXWL8A-2937832QTXWL8C-2937833QTXWL10-2937834QTXWL11-2937835QTXWL12-2937836QTXWL13-2937837QTXWL8A-5937843QTXWL8C-5937842QTXWL10-5937841QTXWL11-5937840QTXWL12-5937839QTXWL13-5937838QTXWL8A-10937858QTXWL8C-10937859QTXWL10-10937860QTXWL11-10937861QTXWL12-10937862QTXWL13-10937863QTXWL8A-20937869QTXWL8C-20937868QTXWL10-20937867QTXWL11-20937866QTXWL12-20937865QTXWL13-20937864QBGT390Part number spare elementBGT500Part number spare elementBGT600Part number spare elementBGT800Part number spare elementBGT1000Part number spare elementBGT1500Part number spare elementBGT2000Part number spare elementBGT2400Part number spare elementSupersedes spare element tableTXX8A-10-B937728TXX8C-10-B937729TXX10-10-B937730TXX11-10-B937731TXX12-10-B937732TXX13-R-10-B937733TXX14-10-B937734-TXW8A-2-B937742QTXW8C-2-B937741QTXW10-2-B937740QTXW11-2-B937739QTXW12-2-B937738QTXW13-R-2-B937737QTXW14-2-B937736QTXWH14-2-B937735QTXW8A-5-B937763QTXW8C-5-B937764QTXW10-5-B937765QTXW11-5-B937766QTXW12-5-B937767QTXW13-R-5-B937768QTXW14-5-B937769QTXWH14-5-B937770QTXW8A-10-B937778QTXW8C-10-B937777QTXW10-10-B937776QTXW11-10-B937775QTXW12-10-B937774QTXW13-R-10-B937773QTXW14-10-B937772QTXWH14-10-B937771QTXW8A-20-B937799QTXW8C-20-B937800QTXW10-20-B937801QTXW11-20-B937802QTXW12-20-B937803QTXW13-R-20-B937804QTXW14-20-B937805QTXWH14-20-B937806QST8A-40-B937813ST8C-40-B937812ST10-40-B937811ST11-40-B937810ST12-40-B937809ST13-40-B937808ST14-40-B937807-BGT Series Seal KitsBGT <strong>Filter</strong> connectionPort(s) <strong>Filter</strong> head2" SAE BGT length 11 and 123" SAE BGT Length 13 and larger1x2" SAE Flanged +2x1 1 /4" SAE Flanged for BGT Length 11 and 123x1 1 /4" SAE Flanges + 1x 1 /2" SAE for BGT Length 13 and largerNitrile Seal kitPart Number20490100172049010023918045048204901002049Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
50Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
IN-AGB SeriesIn-Tank Mounted Return Line <strong>Filter</strong>sMax. 2400 I/minFlow from inside tooutDesigned for in-builtfiltrationThe IN-AGB Series features a quickresponse bypass construction withlow hysteresis, magnetic pre-filtrationand a high dirt-holding capacity. Flowrates from 30 l/min to 2400 l/min.LEIF® elements available up to 1500l/min. A low cost, high performancefilter.AN INNOVATIVE GREENFILTER FEATURINGLEIF LEIF ®Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• IN-AGB features a bypass construction with low hysteresis.• Magnetic pre-filtration and a high dirt-holding capacity.• Wide range of diffusers including airtight options.• Flow from inside to out.• Flow rates from 30 l/min to 2400 l/min.• Patented LEIF ® elements safeguard filtration quality.www.parkerhfde.com51Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
IN-AGB SeriesIn-Tank Mounted Return Line <strong>Filter</strong>sMAX 2400 I/minFeatures & BenefitsFeatures<strong>Filter</strong> integrated in tankLEIF ® elementsMagnetic pre-filtrationIn-to-Out filtrationHigh level of customisationQuick response bypass with lowhysteresisStandard or customised funnelAdvantagesCompact low cost solution<strong>Filter</strong> protected by reservoirPatented element safeguards the use of genuinepartsRemoves ferrous particles, even during bypassconditionsAll captured contamination retains inside theelementDedicated system-matched solutions can beeasily made availableReduction of bypass period due to low hysteresisOnly a small part of the total flow is bypassingthe elementEnsures that oil enters the tank under the oil levelBenefitsSuitable for extreme heavy dutyapplications or hazardous environmentsNo tank top parts contributes toimproved esthetical designGuaranteed quality of filtrationContributes to ISO 14001 certificationImproved fluid cleanliness levelsExtended element life timeNo recontamination of system duringchange of elementsImproved integration of filter in systemcombined with lower initial system costsImproved protection of systemSignificant reduction of oil foamingTypical ApplicationsAgricultural machinesArticulated dump trucksForestry equipmentWheeled loadersLubrication systemsExcavatorsThe Parker Filtration IN-AGBIn-Tank Mounted Return Line <strong>Filter</strong>s.The low-cost, high-performance return line IN-AGB filterfeatures Q3 filter media, a bypass construction with lowhysteresis, magnetic pre-filtration and a high dirt-holdingcapacity. The range is capable of handling flow rates from30 l/min up to 2400 l/min. LEIF ® elements are available for flowrates up to 1500 l/min, meeting the most stringent demandsfor environmentally-friendly filtration and offering protectionagainst poor quality pirate elements.52Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationAssembly:Inside tank.Seal material:Nitrile, fluoroelastomer, neoprene.Operating temperature range:Seal material Nitrile: -40° to +100°C.Seal material Fluoroelastomer: -20° to+100°C.Bypass setting:0.8/1.5 and 2.0 bar.Other settings on request.Degree of filtration:Determined by multipass test according toISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimalfatigue life is achieved.Filtration media:Microglass III, Ecoglass III for LEIF ® elementsAlso available 10μm Cellulose and 40μm stainless steel mesh.Element collapse rating:10 bar (ISO 2941).Options:Diffuser type P (straight pipe, no perforated plate area)Diffuser type T (with closed diffuser end cap and with perforated plate area,recommended when oil entry in reservoir is close to the reservoir bottom orto ensure oil entry under the reservoir oil level)Magnetic pack:Standard.Note: IN-AGB 2-400 and 2-500 are standard supplied without magnets.<strong>Filter</strong> element:LEIF ® element with reusable metal element sleeve.Optional conventional style element with steel end caps.The LEIF ® element is patented and safeguards the use of genuine parts.Note: LEIF ® element can be used with mineral and HEES type oils.For other fluids consult Parker Filtration.LEIF ® contributes to ISO 14001 quality standards.Insert-AGB LEIF ® 3 seriesRef. No. Description1 1 Top-spring2 1 Insert3 1 Insert-seal4 1 LEIF ® Element5 1 Sleeve6 1 Gasket7 1 O-ring8 1 Bypass set9 1 Diffuser12341-3 Series 4 Series12345Insert-AGB LEIF ® 4 seriesRef. No. Description1 1 Top-spring2 1 Insert3 1 Insert-seal4 1 Inner sleeve5 1 LEIF ® -element6 1 Outer sleeve7 1 O-ring8 1 O-ring9 1 Bypass set10 1 Diffuser5678678910953Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
IN-AGB SeriesIn-Tank Mounted Return Line <strong>Filter</strong>sMAX 2400 I/minSpecification (cont.)ABdpCDy45°hEMounting arrangementHxFGs0.81 SeriesINAGBLength02345TypeIN30IN60IN90IN120IN125A B H h d x y s p C D E F G8787878787797979797912217321726738135353535352020202020444446666645454545452020202020888888888885858585858080808080444441212121212without diffuserØ230Ø231±0.22 Series678910IN170IN230IN300IN400IN50012512512512512511611611611611628436055957959948484848482525252525555558888877777777774242424242126126126126126122122122122122117117117117117555551515151515Ø216Ø20Ø227±0.23.212.53 Series11A1112IN270IN390IN5001501501501381381383254075996262623030307771212121001001005555551511511511491491491391391395551818181466060.845°Dimensions in mmØ217±0.212.5HIN-AGB 3 IN-AGB 4Ø193Ø26015°uv3.20.8R±0.1Ø203without diffuserØMØQ+1.0-1.5ØMØQ 0-0.53.2INAGBLengthTypeK L M U V Q RINAGBLength131415161718TypeIN600IN800IN1000IN1500IN2000IN2400H543653758103813031303Lwithdiffuser11A1112131415161718IN270IN390IN500(3)IN600IN800IN1000IN1500IN2000IN240032436455444555566094012201220110110125183183183183183183175175175239239239239239239106106106145145145145145145555555606060606060178178178250.5250.5250.5250.5250.5250.52.52.52.52.52.52.554Kmin.12Dimensions in mm3 Series4 SeriesDimensions in mmParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop CurvesThe recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp32 x viscosity of medium used) / 32cSt.<strong>Filter</strong> housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.IN30 (Element length code 0)IN60 (Element length code 2)Flow (US GPM)Flow (US GPM)0 3 5 8 11 13 16 182.536.30 5 11 16 21 26 31 372.536.3Δp (bar)21.502Q114.505Q10Q0.57.320Q000 10 20 30 40 50 60 70Flow (l/min)2921.8Δp (PSID)Δp (bar)21.510.502Q05Q10Q20Q000 20 40 60 80 100 120 140Flow (l/min)2921.814.57.3Δp (PSID)IN90 (Element length code 3)Flow (US GPM)IN120 (Element length code 4)Flow (US GPM)0 13 26 39 532.536.30 13 26 39 53 662.536.3202Q29202Q29Δp (bar)1.510.505Q10Q20Q000 50 100 150 200Flow (l/min)21.814.57.3Δp (PSID)Δp (bar)1.5114.505Q0.510Q7.320Q000 50 100 150 200 250Flow (l/min)21.8Δp (PSID)IN125 (Element length code 5)Flow (US GPM)IN170 (Element length code 6)Flow (US GPM)0 13 26 39 53 661.623.20 13 26 39 53 66 79 92343.5Δp (bar)1.41.210.80.60.40.202Q05Q10Q20Q000 50 100 150 200 250Flow (l/min)20.317.414.511.68.75.82.9Δp (PSID)Δp (bar)2.521.502Q114.505Q0.510Q 7.320Q000 50 100 150 200 250 300 350Flow (l/min)36.32921.8Δp (PSID)IN230 (Element length code 7) IN300 (Element length code 8)Flow (US GPM)Flow (US GPM)0 13 26 39 53 66 79 92 106 119 1321.420.30 26 53 79 106 132 1591.623.2Δp (bar)1.217.4102Q14.50.80.605Q11.68.70.40.210Q20Q5.82.9000 50 100 150 200 250 300 350 400 450 500Flow (l/min)Δp (PSID)Δp (bar)1.402Q1.210.80.60.40.220.317.414.511.605Q8.710Q5.820Q2.900 100 200 300 400 5000600Flow (l/min)Δp (PSID)55Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
IN-AGB SeriesIn-Tank Mounted Return Line <strong>Filter</strong>sMAX 2400 I/minPressure Drop Curves (cont.)Δp (bar)Δp (bar)Δp (bar)Δp (bar)Δp (bar)IN400 (Element length code 9)Flow (US GPM)01.81.626 53 79 106 132 15926.123.21.420.302Q1.217.410.814.511.605Q0.68.710Q0.45.820Q0.22.9000 100 200 300 400 500 600Flow (l/min)IN390 (3)(Element length code 11)Flow (US GPM)01.226 53 79 106 132 159 18517.4102Q14.50.811.60.68.705Q0.45.810Q0.220Q2.9000 100 200 300 400 500 600 700Flow (l/min)01.226 53 79 106 132 159 185 211 23817.402Q114.50.811.60.60.4IN600 (Element length code 13)Flow (US GPM)05Q10Q0.22.920Q000 100 200 300 400 500 600 700 800 900Flow (l/min)0 53 106 159 211 264 317 3701.217.402Q10.814.511.60.60.40.210Q2.920Q00 200 400 600 800 1000 1200014000.60.4IN1000 (Element length code 15)Flow (US GPM)Flow (l/min)05QIN2000 (Element length code 17)Flow (US GPM)01.2106 211 317 423 529 63517.402Q10.814.511.605Q10Q0.22.920Q000 400 800 1200 1600 2000 2400Flow (l/min)8.75.88.75.88.75.8Δp (PSID)Δp (PSID)Δp (PSID)Δp (PSID)Δp (PSID)56Δp (bar)Δp (bar)Δp (bar)Δp (bar)Δp (bar)IN500 (Element length code 10)Flow (US GPM)01.61.426 53 79 106 132 15923.220.31.210.802Q17.414.511.60.605Q8.710Q0.45.80.2020Q2.900 100 200 300 400 500 600Flow (l/min)IN500 (3) (Element length code 12)Flow (US GPM)01.226 53 79 106 132 159 18517.4102Q14.50.811.60.68.705Q0.45.810Q0.22.920Q000 100 200 300 400 500 600 700Flow (l/min)0 53 106 159 211 264 3171.217.4114.502Q0.811.60.60.40.2IN800 (Element length code 14)Flow (US GPM)05Q10Q20Q000 200 400 600 800 1000 1200Flow (l/min)IN1500 (Element length code 16)Flow (US GPM)01.253 106 159 211 264 317 370 42317.410.80.602Q14.511.68.705Q0.410Q5.80.22.920Q00 200 400 600 800 1000 1200 140001600Flow (l/min)IN2400 (Element length code 18)Flow (US GPM)01.2106 211 317 423 529 63517.4102Q14.50.811.60.68.705Q0.45.810Q0.22.920Q000 400 800 1200 1600 2000 2400Flow (l/min)Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.8.75.82.9Δp (PSID)Δp (PSID)Δp (PSID)Δp (PSID)Δp (PSID)
Pressure Drop Curves (cellulose and stainless steel media)Δp (bar)IN30 (Element length code 0)Cellulose & Stainless steel mediaFlow (US GPM)00.091.3 3 4.3 5 6.3 8 9.3 111.310.081.160.071.020.060.870.0510C0.730.040.58040W0.030.440.020.290.010.15000 5 10 15 20 25 30 35 40Flow (l/min)IN90 (Element length code 3)Cellulose & Stainless steel mediaFlow (US GPM)Δp (PSID)Δp (bar)0 4.3 8 12.3 160.120.10.080.060.040.02IN60 (Element length code 2)Cellulose & Stainless steel media00Flow (US GPM)Flow (l/min)10C040W20.3241.74015 30 45 60 75 90Flow (US GPM)1.451.160.870.580.29IN120 (Element length code 4)Cellulose & Stainless steel mediaΔp (PSID)Δp (bar)0 8 16240.120.10.080.060.040.0200Flow (l/min)10C040W311.74030 60 90 120Flow (US GPM)1.451.160.870.580.29IN150 (Element length code 5)Cellulose & Stainless steel mediaΔp (PSID)Δp (bar)00.140.120.18 162431392.031.741.450.0810C1.160.060.870.04040W0.580.020.2900030 60 90 120 150Flow (l/min)IN170 (Element length code 6)Cellulose & Stainless steel mediaFlow (US GPM)Δp (PSID)0 8 16240.1231391.740 8 16 24 31 39 47 550.121.740.11.450.11.45Δp (bar)0.080.060.040.0210C040W1.160.870.580.29Δp (PSID)Δp (bar)0.080.060.040.0210C040W1.160.870.580.29Δp (PSID)00030 60 90 120 150Flow (l/min)00030 60 90 120 150 180 210Flow (l/min)Δp (bar)0 13 26 39 53 66 790.121.740.10.080.060.040.02IN230 (Element length code 7)Cellulose & Stainless steel media00Flow (US GPM)050 100 150 200 250 300Flow (l/min)10C040WCellulose and stainless steel mediaExample: IN300 <strong>Filter</strong> Element Length 8 - Cellulose and stainless steel media1.451.160.870.580.29Δp (PSID)Δp (bar)IN300 (Element length code 8)Cellulose & Stainless steel mediaFlow (US GPM)00.140.1213 26 39 53 66 79 92 1062.031.740.110C1.450.081.160.060.870.040.58040W0.020.29000 50 100 150 200 250 300 350 400Flow (l/min)Δp (PSID)57Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
IN-AGB SeriesIn-Tank Mounted Return Line <strong>Filter</strong>sMAX 2400 I/minPressure Drop Curves (cellulose and stainless steel media)Δp (bar)00.0726 53790.060.050.040.030.020.01IN390 (Element length code 11)Cellulose & Stainless steel mediaFlow (US GPM)10C040W1321.020.870.73000 100 200 300 400500Flow (l/min)Flow (US GPM)1060.580.440.290.15IN600 (Element length code 13)Cellulose & Stainless steel mediaΔp (PSID)Δp (bar)0 26 53790.050.040.030.020.01IN500 (Element length code 12)Cellulose & Stainless steel mediaFlow (US GPM)10C040W1320.73000 100 200 300 400 500Flow (l/min)Flow (US GPM)1060.580.440.290.15IN800 (Element length code 14)Cellulose & Stainless steel mediaΔp (PSID)0 26 53 79 106 132 159 1850.071.020 26 53 79 106 132 159 185 2110.060.87Δp (bar)0.060.050.040.030.0210C040W0.870.730.580.440.29Δp (PSID)Δp (bar)0.050.040.030.0210C040W0.730.580.440.29Δp (PSID)0.010.150.010.1500 100 200 300 400 500 600Flow (l/min)0700000 100 200 300 400 500 600 700 800Flow (l/min)IN1000 (Element length code 15)Cellulose & Stainless steel mediaFlow (US GPM)IN1500 (Element length code 16)Cellulose & Stainless steel mediaFlow (US GPM)0 26 53 79 106 132 159 185 211 238 2640.060.870 53 106 159 211 264 317 370 4230.071.02Δp (bar)0.050.040.030.0210C040W0.730.580.440.29Δp (PSID)Δp (bar)0.060.050.040.030.0210C040W0.870.730.580.440.29Δp (PSID)0.010.150.010.15000 100 200 300 400 500 600 700 800 900 1000Flow (l/min)IN2000 (Element length code 17)Cellulose & Stainless steel mediaFlow (US GPM)00 200 400 600 800 1000 1200 1400Flow (l/min)01600Δp (bar)0 53 106 159 211 264 317 370 423 475 528 5810.071.020.060.0510C0.04040W0.030.020.870.730.580.440.29Δp (PSID)0.010.15000 200 400 600 800 1000 1200 1400 1600 1800 2000 2200Flow (l/min)Cellulose and stainless steel mediaExample: IN300 <strong>Filter</strong> Element Length 8 - Cellulose and stainless steel media58Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard products tablePart numberIN310QLBNEXXX1IN320QLBNEXXX1IN510QLBNEXXX1IN520QLBNEXXX1IN610QLBNEXXX1IN620QLBNEXXX1IN810QLBNEXXX1IN820QLBNEXXX1IN1210QLBNEXXX3IN1220QLBNEXXX3IN1510QLBNEXXX3IN1520QLBNEXXX3IN1710QBNEXXX3IN1720QBNEXXX3SupersedesIN90-TXWL3-10B15IN90-TXWL3-20 B15IN125-TXWL3E-10 B15IN125-TXWL3E-20 B15IN170-TXWL4-10 B15IN170-TXWL4-20 B15IN300-TXWL5A-10 B15IN300-TXWL5A-20 B15IN500-TXWL8C-10 T B15IN500-TXWL8C-20 T B15IN1000-TXWL12-10 T B15IN1000-TXWL12-20 T B15IN2000-TXW14-10-B T B15IN2000-TXW14-20-B T B15Flow(l/min)90901251251701703003005005001000100020002000ModelnumberIN90IN90IN125IN125IN170IN170IN300IN300IN500IN500IN1000IN1000IN2000IN2000ElementlengthLength 3Length 3Length 5Length 5Length 6Length 6Length 8Length 8Length 12Length 12Length 15Length 15Length 17Length 17Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.Product configuratorConfigurator example filter including LEIF ® elementBox 1INBox 210Box 305QLBox 4VBox 5NConfigurator example filter including conventional elementBox 1INBox 218Box 320QBox 4BBox 5N1020102010201020102010201020Box 6HBox 6HSeals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNANANANANANANANANANANANANANABypasssettings1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)Box 7XXXBox 7XXXPortsNANANANANANANANANANANANANANABox 81Box 83IncludedoptionsNoneNoneNoneNoneNoneNoneNoneNoneDiffuser type TDiffuser type TDiffuser type TDiffuser type TDiffuser type TDiffuser type TReplacementelements937878Q937877Q937852Q937875Q937853Q937874Q937855Q937872Q937859Q937868Q937862Q937865Q937772Q937805QSupersedesTXWL3-10TXWL3-20TXWL3E-10TXWL3E-20TXWL4-10TXWL4-20TXWL5A-10TXWL5A-20TXWL8C-10TXWL8C-20TXWL12-10TXWL12-20TXW14-10BTXW14-20BBox 1CodeINBox 6Box 2Insert IN-AGBIN30IN60IN90IN120IN150IN170IN230IN300IN400IN500IN390(3)IN270(3)IN500(3)IN600IN800IN1000IN1500IN2000IN2400Bypass valveBypass valve0.8 bar1.5 bar2.0 bar for IN-AGB (up to length 12)Blocked bypassOther bypass settings<strong>Filter</strong> RatingCodeBEHXon requestCode023456789101111A12131415161718Box 3Element mediaDisposable elementLEIF ® elementBox 4Seal typeSeal materialNitrileFluoroelastomerNeopreneBox 7<strong>Filter</strong> connectionPortsNo ports applicableCelluloseNom. rating10CCodeBVOn requestCodeXXXDegree of filtrationGlass fibreMicroglass III (for disposable elements)Ecoglass III (for Leif ® elements)Box 502Q02QLNo indicator05Q05QLIndicator10Q10QLCodeNBox 8OptionsOptionsNo diffuser requiredDiffuser type T with perforated plate areaDiffuser type P without perforated plate areaNo magnetsDiffuser type T and no magnetsDiffuser type P and no magnetsAir tight diffuser type T and no magnetsAir tight diffuser type P and no magnets20Q20QLCode1345ABGHNote: IN-AGB size 2-400 and 2-500 are standard suppliedwithout magnetsNote: Option code 3 only available for series 3 and 4 (Length11 to 18)Wire meshAbs. rating040Wßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A59185999.5%N/A6102099.9%4.571222Mediacode02Q/02QL05Q/05QL10Q/10QL20Q/20QLParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
IN-AGB SeriesIn-Tank Mounted Return Line <strong>Filter</strong>sMAX 2400 I/minOrdering Information (cont.)IN30Part number spare elementIN60Part number spare elementIN90Part number spare elementIN120Part number spare elementIN125Part number spare elementIN170Part number spare elementIN230Part number spare elementIN300Part number spare elementIN400Part number spare elementIN500Part number spare elementIN390Part number spare elementIN500Part number spare elementIN600Part number spare elementIN800Part number spare elementIN1000Part number spare elementIN1500Part number spare elementSupersedes spare element tableTXWL-2937822QTXWL2-2937823QTXWL3-2937824QTXWL3D-2937825QTXWL3E-2937826QTXWL4-2937827QTXWL5-2937828QTXWL5A-2937829QTXWL5B-2937830QTXWL5C-2937831QTXWL8A-2937832QTXWL8C-2937833QTXWL10-2937834QTXWL11-2937835QTXWL12-2937836QTXWL13-2937837QTXWL-5937885QTXWL2-5937880QTXWL3-5937879QTXWL3D-5937850QTXWL3E-5937849QTXWL4-5937848QTXWL5-5937847QTXWL5A-5937846QTXWL5B-5937845QTXWL5C-5937844QTXWL8A-5937843QTXWL8C-5937842QTXWL10-5937841QTXWL11-5937840QTXWL12-5937839QTXWL13-5937838QTXWL-10937884QTXWL2-10937881QTXWL3-10937878QTXWL3D-10937851QTXWL3E-10937852QTXWL4-10937853QTXWL5-10937854QTXWL5A-10937855QTXWL5B-10937856QTWXL5C-10937857QTXWL8A-10937858QTXWL8C-10937859QTXWL10-10937860QTXWL11-10937861QTXWL12-10937862QTXWL13-10937863QTXWL-20937883QTXWL2-20937882QTXWL3-20937877QTXWL3D-20937876QTXWL3E-20937875QTXWL4-20937874QTXWL5-20937873QTXWL5A-20937872QTXWL5B-20937871QTXWL5C-20937870QTXWL8A-20937869QTXWL8C-20937868QTXWL10-20937867QTXWL11-20937866QTXWL12-20937865QTXWL13-20937864QIN-AGB Series Seal KitsPart Number Description2049010003 NITRILE SEAL KIT IN 0-52049010045 FLUOROEL<strong>AS</strong>TOMER SEAL KIT IN 0-52049010004 NITRILE SEAL KIT IN 6-102049010028 FLUOROEL<strong>AS</strong>TOMER SEAL KIT IN 6-102049010005 NITRILE SEAL KIT IN 11 and 122049010021 NITRILE SEAL KIT (FUNNEL) IN 11 and 122049010059 FLUOROEL<strong>AS</strong>TOMER SEAL KIT IN 11 and 122049010029 FLUOROEL<strong>AS</strong>TOMER SEAL (FUNNEL) KIT IN 11 and 122049010006 NITRILE SEAL KIT IN 13 - 182049010022 NITRILE SEAL KIT (FUNNEL) IN 13 - 182049010030 FLUOROEL<strong>AS</strong>TOMER SEAL KIT IN 13 - 18IN30Part number spare elementIN60Part number spare elementIN90Part number spare elementIN120Part number spare elementIN125Part number spare elementIN170Part number spare elementIN230Part number spare elementIN300Part number spare elementIN390Part number spare elementIN500 (3 series)Part number spare elementIN600Part number spare elementIN800Part number spare elementIN1000Part number spare elementIN1500Part number spare elementIN2000Part number spare elementIN2400Part number spare elementSupersedes spare element tableTXX-10-B937720TXX2-10-B937721TXX3-10-B937722TXX3D-10-B937723TXX3E-10-B937724TXX4-10-B937725TXX5-10-B937726TXX5A-10-B937727TXX8A-10-B937728TXX8C-10-B937729TXX10-10-B937730TXX11-10-B937731TXX12-10-B937732TXX13-R-10-B937733TXX14-10-B937734-TXW-2-B937752QTXW2-2-B937751QTXW3-2-B937750QTXW3D-2-B937749QTXW3E-2-B937748QTXW4-2-B937747QTXW5-2-B937746QTXW5A-2-B937745QTXW8A-2-B937742QTXW8C-2-B937741QTXW10-2-B937740QTXW11-2-B937739QTXW12-2-B937738QTXW13-R-2-B937737QTXW14-2-B937736QTXWH14-2-B937735QTXW-5-B937753QTXW2-5-B937754QTXW3-5-B937755QTXW3D-5-B937756QTXW3E-5-B937757QTXW4-5-B937758QTXW5-5-B937759QTXW5A-5-B937760QTXW8A-5-B937763QTXW8C-5-B937764QTXW10-5-B937765QTXW11-5-B937766QTXW12-5-B937767QTXW13-R-5-B937768QTXW14-5-B937769QTXWH14-5-B937770QTXW-10-B937788QTXW2-10-B937787QTXW3-10-B937786QTXW3D-10-B937785QTXW3E-10-B937784QTXW4-10-B937783QTXW5-10-B937782QTXW5A-10-B937781QTXW8A-10-B937778QTXW8C-10-B937777QTXW10-10-B937776QTXW11-10-B937775QTXW12-10-B937774QTXW13-R-10-B937773QTXW14-10-B937772QTXWH14-10-B937771QTXW-20-B937789QTXW2-20-B937790QTXW3-20-B937791QTXW3D-20-B937792QTXW3E-20-B937793QTXW4-20-B937794QTXW5-20-B937795QTXW5A-20-B937796QTXW8A-20-B937799QTXW8C-20-B937800QTXW10-20-B937801QTXW11-20-B937802QTXW12-20-B937803QTXW13-R-20-B937804QTXW14-20-B937805QTXWH14-20-B937806QST-40-B937821ST2-40-B937820ST3-40-B937819ST3D-40-B937818ST3E-40-B937817ST4-40-B937816ST5-40-B937815ST5A-40-B937814ST8A-40-B937813ST8C-40-B937812ST10-40-B937811ST11-40-B937810ST12-40-B937809ST13-40-B937808ST14-20937807-60Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Tanktopper Series I,II&IIITanktop Mounted Return Line <strong>Filter</strong>swith Integrated Air BreatherMax. 650 I/min - 10 barWhen an all-in-onesolution mattersReduction of reservoiraccessoriesThe Tanktopper Series featuresan integrated, 10 micron Abs. airbreather. Maximum pressure 10 bar.Maximum flow 650 l/min. LEIF®elements available. An all-in-one,easy-to-mount filter range for morecompact tank design.AN INNOVATIVE GREENFILTER FEATURINGLEIF LEIF ®Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Tanktopper offers a total filtration solution with integrated airbreather.• In-to-Out filtration plus gauge and switch options.• Maximum pressure 10 bar. Maximum flow 650 l/min.• Patented LEIF ® elements safeguard filtration quality.www.parkerhfde.com61Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Tanktopper Series I,II&IIITanktop Mounted Return Line <strong>Filter</strong>swith Integrated Air BreatherFeatures & BenefitsFeaturesReturn line filter with IntegratedairbreatherAirbreather equipped with highquality labyrinthSecond port and dipstick availableAirbreather element always suppliedwith spare return line filter elementsLEIF ® elementsMagnetic pre-filtrationIn-to-Out filtrationFull flow bypass with low hysteresisStandard or customised funnelAdvantagesAll in one filterNo oil leakage through the airbreatherFiller port and level indicator function can beintegrated in filterBoth filter elements can be replaced during theservice eventPatented element safeguards the use of genuinepartsRemoves ferrous particles, even during bypassconditionsAll captured contamination retains inside theelementReduction of bypass period due to low hysteresisOnly a small part of the total flow is bypassingthe elementEnsures that oil enters the tank under the oil levelBenefitsMore compact design, cost reductiondue to elimination of loose airbreatherImproved efficiency of airbreatherNo oil leakage on the tank / in theenvironmentSignificant reduction of reservoiraccessoriesImproved protection of system due tochange of airbreather elementGuaranteed quality of filtrationContributes to ISO 14001 certificationImproved fluid cleanliness levelsExtended element life timeNo recontamination of system duringchange of elementsImproved protection of systemSignificant reduction of oil foamingTypical ApplicationsTPR IFork lift trucksPower packsMini excavatorTPR IIGully-suckerPower packsDredging shipsTPR IIIMobile cranesRefuse vehiclesThe Parker Filtration Tanktopper Series I, II & IIITanktop Mounted Return Line <strong>Filter</strong>s.The TPR Series I, II & III offer a total filtration solution.A 10-micron Abs. air breather that is integrated into thefilter housing, a magnet column for pre-filtration, ‘In-to-Out’filtration, a full-flow bypass with low hysteresis, and thehigh performance Q3 filter element materials are all provensuccess factors in efficient return-line filtration for flow ratesup to 650 l/min. Several pressure gauges and switches canbe applied, combined or not with a dipstick. The all-in-one,easy-to-mount cost-saving TPR solution allows for a morecompact tank design.62Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationOperation pressure:Max. 10 bar.Assembly:Tank top mounted.Connections:Threaded BSP or SAE ports.Second return port available for Tanktopper II and Tanktopper III.<strong>Filter</strong> housing:Aluminium head and co-polymer cover.Seal material:Nitrile, Fluoroelastomer.Operation temperature range:-40 to +80°C.Bypass setting:Opening pressure 0.8, 1.5 or 2.5 bar for Tanktopper I.Opening pressure 1.5 bar for Tanktopper II and III.Degree of filtration:Determined by multipass test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimum fatigue life is achieved.Filtration media:Microglass III, Ecoglass III for LEIF ® element. Air breather 10 micron Abs.Also available 10μm Cellulose and 40μm stainless steel mesh. (TPR1)Element collapse rating:10 bar (ISO 2941).Pressure indicator options:Setting 0.7 or 1.2 bar.Other settings on request.Visual pressure gauge.Electrical pressure switch.Options:DipstickSecond port (only for TPR II and III)Magnetic pack:Optional for Tanktopper I.Standard for Tanktopper II and III.<strong>Filter</strong> element:LEIF ® element with reusable metal element sleeve.Conventional style element with steel end caps only optional forTanktopper I. The LEIF ® element is patented and safeguards theuse of genuine parts.Note:LEIF ® element can be used with mineral and HEES typeoils. For other fluids consult Parker Filtration.LEIF ® contributes to ISO 14001 quality standardsTanktopper I (length 1 and 2)FFree element clearance27(1.06)123H 77 (3.03)D33 (1.3)15(0.59)74±0.5 (2.91±0.02)Mounting hole15(0.59)M8Ø72.9(2.87)Ø61(2.40)0.23.2R61Min.80mm(3.15)Max oil-levelMin.80mm(3.15)0°-max.45°1345678111274 (2.91)61 (2.40)NOM.Ø25(0.98)Indicator*For filter with air breather:In order to keep the minimum requireddistance under all circumstances, it isrecommended to position the filter in themiddle of the reservoir54°54°55 (2.16)G 1 /8ISO 228(BSP)G 1 /8ISO 228(BSP)R1161 (2.40)Ø9 (0.35)Max. torque-loadfilter-tank 8 NmPitch 9063LengthH F D169 160 G 3 /41 TPR1-40 (6.65) (6.30) (BSP)269 2602 TPR1-80 (10.60) (10.23) SAE 12Dimensions in mm910Tanktopper IRef. No. Description1 1 Cover2 1 Magnet-set3 1 Cover-seal4 1 Bridge (blue)5 1 LEIF ® Element6 1 Sleeve7 1 Funnel-assembly8 1 <strong>Filter</strong>-housing9 1 Housing-seal10 1 Airguide11 1 Cover airbreather12 1 Breather-element13 1 Dipstick assemblyParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Tanktopper Series I,II&IIITanktop Mounted Return Line <strong>Filter</strong>swith Integrated Air BreatherSpecification (cont.)Tanktopper II (length 5, 6 and 7)100(3.94)40(1.59)(D)(D)44(1.73)4xM10F4xM8(Min. 100mm)(3.94)Max oil level82(3.23)105(4.13)Oil levelFree element clearanceFree element clearance111+0.50Mounting hole4x9 on pitch circle Ø145Torque-load max. 8 Nm (5.70)ISO 228 G 1 /8 (BSP)Ø40(1.57)171 (6.73)Top view135(5.31)22(H)Top4x11 on pitch circle 185ISO 228-G1/8 (BSP) Torque-load max. 15 Nm110 (4.33) 110 (4.33)Second port optional3.2Tanktopper III (length 10 and 11)(H)Second port optional3.20.3Max oil level0.3+1Mounting hole Ø140 0(5.51)17(0.67)Length1011Length567(Port)G1 1 /4G1 1 /2SAE 20SAE 24(Min. 100mm)(3.94)(0°-max.30°)For filter with* air breather:In order to keep theminimum requireddistance under allcircumstances, it isrecommended toposition the filter inthe middle of thereservoirD(BSP)(BSP)H F181 170TPR2-120 (7.12) (6.70)267 255TPR2-200 (10.51) (10.03)400 380TPR 2-250 (15.75) (14.96)Dimensions in mmFor filter with air breather:* In order to keep the minimum requireddistance under all circumstances, it isrecommended to position the filter in themiddle of the reservoirD H FTPR3-450TPR3-650-G1 1 /2 415 345(BSP) (16.34) (13.58)-G1 1 /2 600 530(BSP) (23.62) (20.87)Dimensions in mm1234567891011121312345768910111414Tanktopper II & IIIRef. No. Description1 1 Hexagon socket bolt M82 1 Air breather cap3 1 Air breather filter medium4 1 Cover (assembly)5 1 Cover seal6 1 Bridge7 1 Magnet set8 1 Element9 1 Sleeve10 1 <strong>Filter</strong> house11 1 Airguide12 1 Tank gasket13 1 Funnel14 1 Dipstick assembly105(4.13)Oil level(Min. 100mm)(3.94)0°-max.40°1213130(5.12)Ø40 (1.57)view64Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Tanktopper Series I&IITanktop Mounted Return Line <strong>Filter</strong>swith Integrated Air BreatherPressure Drop Curves - Tanktopper I<strong>Filter</strong> housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.TPR40 Empty Housing (Length code 1)Flow (US GPM)0 1 3 4 5 6 8 9 11 12 130.22.9TPR80 Empty Housing (Length code 2)Flow (US GPM)0 3 5 8 11 13 16 18 21 240.22.90.150.15Δp (bar)0.11.5Δp (PSID)Δp (bar)0.11.5Δp (PSID)0.050.0500 5 10 15 20 25 30 35 40 45 50Flow (l/min)0TPR40 (Element length code 1)Flow (US GPM)000 10 20 30 40 50 60 70 80 90Flow (l/min)TPR80 (Element length code 2)Flow (US GPM)0 1 3 4 5 6 8 9 11 12 131.420.30 3 5 8 11 13 16 18 21 241.420.31.2102Q17.514.51.2102Q17.514.5Δp (bar)0.80.60.40.205Q10Q20Q11.68.75.82.9Δp (PSID)Δp (bar)0.80.60.40.205Q10Q20Q11.68.75.82.9Δp (PSID)000 5 10 15 20 25 30 35 40 45 50Flow (l/min)000 10 20 30 40 50 60 70 80 90Flow (l/min)TPR40 (Element length code 1)(cellulose and stainless steel)Flow (US GPM)TPR80 (Element length code 2)(cellulose and stainless steel)Flow (US GPM)0 1 3 4 5 6 8 9 11 12 130.11.50 3 5 8 11 13 16 18 21 240.11.50.081.160.081.16Δp (bar)0.060.040.0210C040W0.870.580.29Δp (PSID)Δp (bar)0.060.040.0210C040W0.870.580.29Δp (PSID)000 5 10 15 20 25 30 35 40 45 50Flow (l/min)Pressure Drop Curves - Tanktopper II000 10 20 30 40 50 60 70 80 90Flow (l/min)<strong>Filter</strong> housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.TPR II Empty Housing with G1 1 /4” portsTPR II Empty Housing with G1 1 /2” ports(Length code 5, 6 and 7) (Length code 5, 6 and 7)Flow (US GPM)Flow (US GPM)0 5 11 16 21 26 31 37 420.22.90 5 11 16 21 26 31 37 42 47 53 58 64 690.22.90.150.15Δp (bar)0.11.5Δp (PSID)Δp (bar)0.11.5Δp (PSID)0.050.05000 20 40 60 80 100 120 140 160Flow (l/min)65000 20 40 60 80 100 120 140 160 180 200 220 240 260Flow (l/min)Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Tanktopper Series II&IIITanktop Mounted Return Line <strong>Filter</strong>swith Integrated Air BreatherPressure Drop Curves - Tanktopper II (cont.)<strong>Filter</strong> housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.TPR120 (Element length code 5)Flow (US GPM)TPR200 (Element length code 6)Flow (US GPM)Δp (bar)0 5 11 16 21 26 31 370.811.60.702Q0.605Q0.50.410Q0.30.220Q0.1000 20 40 60 80 100 120 140Flow (l/min)10.28.77.35.84.42.91.5Δp (PSID)Δp (bar)0 13 26 39 53 66 790.913.10.802Q0.70.605Q0.50.410Q0.30.220Q0.100 50 100 150 200 2500300Flow (l/min)11.610.28.77.35.84.42.91.5Δp (PSID)TPR250 (Element length code 7)Flow (US GPM)0 13 26 39 53 66 790.811.60.710.20.68.7Δp (bar)0.50.40.30.20.102Q20Q05Q10Q7.35.84.42.91.5Δp (PSID)Pressure Drop Curves - Tanktopper III00 50 100 150 200 2500300Flow (l/min)<strong>Filter</strong> housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.TPR III Empty Housing with G1 1 /2” ports(Length code 10 and 11)Flow (US GPM)Δp (bar)0113 26 39 53 66 79 92 106 119 132 145 159 172 185 198 211 22514.50.90.80.70.60.50.40.30.20.1000 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850Flow (l/min)11.68.75.82.9Δp (PSID)TPR450 (Element length code 10) TPR650 (Element length code 11)Flow (US GPM)Flow (US GPM)01.226 53 79 106 132 159 18517.402Q114.501.2126 53 79 106 132 159 185 211 23817.402Q14.5Δp (bar)0.80.60.40.205Q10Q20Q11.68.75.82.9Δp (PSID)Δp (bar)0.80.60.40.205Q10Q20Q11.68.75.82.9Δp (PSID)000 100 200 300 400 500 600 700Flow (l/min)000 100 200 300 400 500 600 700 800 900Flow (l/min)66Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Tanktopper Series I,II&IIITanktop Mounted Return Line <strong>Filter</strong>swith Integrated Air BreatherOrdering InformationStandard products tablePart numberSupersedesTPR110QLBP2EG12E TPR40-G 3 /4 PXWL1-10 B15 MM MATPR120QLBP2EG12E TPR40-G 3 /4 PXWL1-20 B15 MM MATPR210QLBP2EG12L TPR80-G 3 /4 PXWL2-10 AB15 MM MATPR220QLBP2EG12L TPR80-G 3 /4 PXWL2-20 AB15 MM MATPR510QLBP2E2G201 TPR120-2G1 1 /4 PXWL3-10 B15 MMTPR520QLBP2E2G201 TPR120-2G1 1 /4 PXWL3-20 B15 MMTPR710QLBP2E2G241 TPR250-2G1 1 /2 PXWL4A-10 B15 MMTPR720QLBP2E2G241 TPR250-2G1 1 /2 PXWL4A-20 B15 MMTPR1110QLBP2E2G241 TPR650-2G1 1 /2 PXWL8-10 B15 MMTPR1120QLBP2E2G241 TPR650-2G1 1 /2 PXWL8-20 B15 MMFlow(l/min)40408080120120250250650650ModelnumberElementlengthTPR40 Length 1TPR40 Length 1TPR80 Length 2TPR80 Length 2TPR120 Length 5TPR120 Length 5TPR250 Length 7TPR250 Length 7TPR650 Length 11TPR650 Length 11Mediarating (μ)10201020102010201020Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrilePluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedBypasssettings1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)PortsG 3 /4G 3 /4G 3 /4G 3 /4IncludedoptionsMagnetsMagnetsAluminium funnel, magnetsAluminium funnel, magnetsNoneNoneNoneNoneNoneNone2xG1 1 /42xG1 1 /42xG1 1 /22xG1 1 /22xG1 1 /22xG1 1 /2Note: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.Replacementelements937902Q937904Q937903Q937905Q937892Q937895Q937894Q937897Q937914Q937917QSupersedesPXWL1-10PXWL1-20PXWL2-10PXWL2-20PXWL3-10PXWL3-20PXWL4A-10PXWL4A-20PXWL8-10PXWL8-20Visual indicatorThread connection G 1 /8CodeFMUG2EBPG02LSpecificationsElec.rating42V/2AThread connection G 1 /8Elec.connectionAMP terminal 6.3x0.8ProtectionIP65 (terminal IP00)Switch typeNO or NCCodeFMUS2EBMG02L (NO switch)FMUS3EBMG02L (NC switch)Normally open contactsNormally closed contactsProduct configuratorConfigurator example TPR filterBox 1TPRBox 22Box 305QLBox 4BBox 5S2Box 6IBox 7G12Box 8LBox 1CodeTPRBox 2<strong>Filter</strong> typeHousingTPR 1-40TPR 1-80TPR 2-120TPR 2-200TPR 2-250TPR 3-450TPR 3-650Code125671011Box 3Element mediaDisposable element (TPR I only)LEIF ® element (for all TPR <strong>Filter</strong>s)CelluloseNom. rating10CDegree of filtrationGlass fibreMicroglass III (for disposable elements)Ecoglass III (for Leif ® elements)02Q02QL05Q05QL10Q10QL20Q20QLWire meshAbs. rating040WBox 4Seal typeSeal materialNitrileFluoroelastomerCodeBon requestBox 5IndicatorPressure gauge, setting 1.2 bar, G 1 /8Pressure switch 42V, 1.2 bar setting, NO with G 1 /8Pressure switch 42V, 1.2 bar setting, NC with G 1 /8Pressure switch 250V, NO/NC with G 1 /8No indicator, indicator ports not machinedNo indicator, indicator port R pluggedNo indicator, indicator ports L+RpluggedOther settings for indicators / gauges on requestCodeG2S2S3S4on requeston requestP2on requestBox 6Bypass valveBypass valve0.8 bar1.5 bar2.5 bar (TPR 1 Series only)Other bypass settingsCodeBEon requeston requestNote 1: Part numbers featured with boldhighlighted codes will ensure a ‘standard’product selection.Note 2: Alternate displayed part numberselection will require you to contact ParkerFiltration for availability.Box 7<strong>Filter</strong> connectionPortsG 3 /4 (BSP) (TPR 1 Series)SAE12 (TPR 1 Series)G1 1 /4 (BSP) (TPR 2 Series)2 x ISO 228-G1 1 /4 (BSP) (TPR 2 Series)SAE 20 (TPR 2 Series)2 x SAE 20 (TPR 2 Series)SAE 24 (TPR 2 Series)2 x SAE 24 (TPR 2 Series)G1 1 /2 (BSP) (TPR 2 and 3 Series)2xG1 1 /2 (BSP) (TPR 2 and 3 Series)CodeG12S12G202G20S202S20S242S24G242G24Box 8OptionsOptionsStandardDipstickAluminium funnel for TPR 1-80Magnets for TPR 1 SeriesMagnets + Dipstick for TPR 1 SeriesMagnets + Aluminium Funnel for TPR 80 SeriesMagnets + Aluminium Funnel + Dipstick for TPR 80 SeriesOther combinationsCode16JEKLMon requestNote: Tanktopper I Series are standard supplied with POM type diffuser.Aluminium funnel is recommended for heavy duty applications, sensitivity forelectrostatically charging or high fluid temperatures.Tanktopper II and III Series are always supplied with metal diffuser.Highlights Key (Denotes partnumber availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard itemsare available within four weeks67Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Tanktopper Series I,II&IIITanktop Mounted Return Line <strong>Filter</strong>swith Integrated Air BreatherOrdering Information (cont.)ßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222Mediacode02Q/02QL05Q/05QL10Q/10QL20Q/20QLTPR 1-40Part number spare elementTPR 1-80Part number spare elementTPR 2-120Part number spare elementTPR 2-200Part number spare elementTPR 2-250Part number spare elementTPR 3-250Part number spare elementTPR 3-450Part number spare elementTPR 3-650Part number spare elementSupersedes spare element tablePXWL1-2937898QPXWL2-2937899QPXWL3-2937886QPXWL4-2937887QPXWL4A-2937888QPXWL6-2937906QPXWL7-2937907QPXWL8-2937908QPXWL1-5937900QPXWL2-5937901QPXWL3-5937889QPXWL4-5937890QPXWL4A-5937891QPXWL6-5937909QPXWL7-5937910QPXWL8-5937911QPXWL1-10937902QPXWL2-10937903QPXWL3-10937892QPXWL4-10937893QPXWL4A-10937894QPXWL6-10937912QPXWL7-10937913QPXWL8-10937914QPXWL1-20937904QPXWL2-20937905QPXWL3-20937895QPXWL4-20937896QPXWL4A-20937897QPXWL6-20937915QPXWL7-20937916QPXWL8-20937917QSupersedes spare element tableTPR 1-40Part number spare elementTPR 1-80Part number spare elementTPR 3-160Part number spare elementTPR 3-250Part number spare elementTPR 3-450Part number spare elementPXX1A-10937918PXX2A-10937919PXW1A-2937920QPXW2A-2937921QPXW5-2937922QPXW6-2937923QPXW7-2937924QPXW1A-5937925QPXW2A-5937926QPXW5-5937927QPXW6-5937928QPXW7-5937929QPXW1A-10937930QPXW2A-10937931QPXW5-10937932QPXW6-10937933QPXW7-10937934QPXW1A-20937935QPXW2A-20937936QPXW5-20937937QPXW6-20937938QPXW7-20937939QPS1A-40937940PS2A-40937941Tank Topper Series Seal KitsPart Number Description2049010052 NITRILE SEAL KIT TPR1 AG FUNNEL ALU2049010050 NITRILE SEAL KIT TPR1 AG FUNNEL POM2049010053 NITRILE SEAL KIT TPR1 NO AG FUNNEL ALU2049010051 NITRILE SEAL KIT TPR1 NO AG FUNNEL POM2049010056 NITRILE SEAL KIT TPR2 B2049010027 NITRILE SEAL KIT TPR3 BAG = Air Guide68Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Suction Return SeriesTanktop Mounted Suction & Return Line<strong>Filter</strong>s - Types SR1 & SR2Max. 250 I/min - 10 bar<strong>Filter</strong>s both openand closed loop oilcircuits through onefilterReduced risk of pumpcavitationAN INNOVATIVE GREENFILTER FEATURINGLEIF LEIF ®SR1 and SR2 are capable of feedingfiltered oil under positive pressure tothe suction side of the boost pumpfiltering both open and closed loop oilsystems through one filter. Maximumpressure 10 bar. Maximum flow 250l/min. Use LEIF® environmentallyfriendly elements.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• SR capable of feeding filtered oil under positive pressure tothe suction side of the boost pump.• <strong>Filter</strong>s both open and closed loop oil systems through onefilter.• Maximum pressure 10 bar. Maximum flow 250 l/min.• SR uses patented LEIF ® elements to safeguard filtrationquality.www.parkerhfde.com69Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Suction Return SeriesTanktop Mounted Suction & Return Line<strong>Filter</strong>s - Types SR1 & SR2Features & BenefitsFeaturesCompact designBypass valve mounted in series withback-pressure valveLEIF ® elementsStrainer located in filter headHigh level of customisationQuick response bypass with lowhysteresisStandard or customised funnelMultiple ports availabilityAdvantagesLess space required to apply SR SeriesPressurisation of filtered oil for hydrostatic driveensured during bypassPatented element safeguards the use of genuinepartsStrainer filters all bypass fluid by using a systemmatcheddegree of filtrationDedicated system-matched solutions can beeasily made availableReduction of bypass period due to low hysteresisOnly a small part of the total flow is bypassingthe elementEnsures that oil enters the tank under the oil levelFlexibility related to suction- and return linehose(s) arrangementBenefitsImproved flexibility during system designLower risk of pump cavitionNo direct bypass in the tank reducingthe additional risk of oil foamingGuaranteed quality of filtrationContributes to ISO 14001 certificationImproved protection of systemStrainer can be inspected and cleanedduring service eventsImproved integration of filter in systemcombined with lower initial system costsImproved protection of systemSignificant reduction of oil foamingMore compact solutions can be realisedThe use of manifold blocks can beavoidedEasy to integrate with cooler circuitTypical ApplicationsMobile equipment with both open and closedhydraulic circuits. For example:Road sweepersRoad rollersFork lift trucksLoading shovelsTelescopic handlersDump trucksSkid steersAgricultural harvesting machinesMini excavatorsThe Parker Filtration Tank TopMounted Suction & Return Line <strong>Filter</strong>s.A tank top mounted return filter capable offeeding filtered oil under positive pressure to thesuction side of the boost pump, thereby filteringboth open and closed loop oil systems throughone filter. The Parker SR filters use the patentedLEIF ® element for environmental-friendly filtrationand offers protection against the use of pirateelements. Several options including integratedsuction strainer and dipstick are available.OptionalstrainerSeparator platewith 1.7 barbypass<strong>Filter</strong>ed oil at 0.5bar pressure<strong>Filter</strong>ed oil returnto tank<strong>Filter</strong>ed oil supply tocharge pumpReturn oilGreen LEIF ® filter element,flow direction out to inValve assembly0.5 bar back pressurevalve with integratedanti cavitation valve70Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Max. 10 bar.Assembly:Tank top mounted filters.Connections:Return port G1 (to BS 2779).} SR1Suction port G 3 /4 (to BS 2779).Return port G1 1 /4 (ISO 228) or SAE20:Optional second return port type SR2. } SR2Suction port G1 (ISO 228) or SAE16:Standard two suction ports.Seal material:Type SR1 – Nitrile.Type SR2 – Nitrile, Fluoroelastomer.Other seal material on request.Operating temperature range:-30° to +110°C.Bypass valve system:Main system bypass valve.Type SR1 – 1.7 bar (2.5 bar optional).Type SR2 – 1.7 bar (2.5 bar optional).Degree of filtration:Determined by multipass test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media designed to optimise fatigue life.Filtration media:Type SR1 and SR2 –Ecoglass III for LEIF ® elements. See ‘degree of filtration’ table on theOrdering Information page.- High dirt holding capacity.- Low pressure drop.- Extended service life.Element collapse rating:Type SR1 – 10 bar (ISO2941).Type SR2 – 10 bar (ISO2941).Suction line:Back-pressure valve setting 0.5 bar (nominal).Anti-cavitation:Emergency suction valve fitted as standard.Construction:Type SR1 and Type SR2<strong>Filter</strong>Housing:Cover:Precision pressure die castingGlass reinforced nylon (high impact andtemperature resistant)Weight: 1.4Kg 3.3Kg<strong>Filter</strong> LEIF ® element with reusable metal element sleeve.element: The patented LEIF ® concept contributes to ISO14001and can be applied with mineral and HEES type fluids.For other fluid types consult Parker Filtration.} SR1& SR2Circuit Application ExampleSuction Return <strong>Filter</strong>: <strong>Hydraulic</strong> CircuitROpen circuitoperatinghydraulics1.7 barBypass valve<strong>Filter</strong> elementSuctionreturn filterassemblyPower takeoffClosed loopcircuit exampleAnticavitationvalveOptional strainer0.5 bar (Nominal)Back pressure valveSTankNote: Suction return filter without optional strainer.Note: Suction return filter with optional strainer.71Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Suction Return SeriesTanktop Mounted Suction & Return Line<strong>Filter</strong>s - Types SR1 & SR2SR1ABDElement removaldistance – C0.23.2EFH maxØGOptionalTank hole out-out ØJ dipstick2 holes Ø7.0on a 115 PCDmax.220I maxAlternative positionfor indicatorsK squareOptionalindicator2 holes Ø11.0on a 115 PCDMinimum oil levelLOutlet Port4.25°Inlet PortSR2Optional secondreturn portABCEH maxF3.2ØGTank hole cutout ØJmax. 250I maxDAlternative position forindicators4 holes Ø11.0on a 165 PCDK squareMinimum oil levelLOptional pressure switch127Dimensionsmm(inches)A B C D E F G H I J K LType SRL1 106 55 280 29.75 26 28 70 96 361 71 to 73(4.17) (2.17) (11.0) (1.17) (1.02) (1.10) (2.76) (3.78) (14.21) (2.8 to 2.87)105(4.13)Type SRL2142 64 380 81 45 36 100 137 440 101 to 103(5.59) (2.52) (14.96) (3.19) (1.77) (1.42) (3.94) (5.39) (17.32) (3.98 to 4.06)145(5.71)Element removal distance for dimension C.72(2.83)81(3.19)72Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Indicator DetailsProtective coverNormally open contactsVisual indicatorThread connectionCode2 barG 1 /8FMUG5HBMG02L74559G 1 /8 (BSP)Ø2824 A/FNormally closed contactsElec.ratingThread connectionElec.connectionProtectionSettingSwitch typeCodePressure switch42V/2AG 1 /8AMP terminal 6.3 x 0.8IP65 (terminal IP00)2 barNO or NCFMUS6HBMG02L (NO switch)FMUS7HBMG02L (NC switch)Note: Vacuum indicators visual or electrical are available onrequest for filter type SR2 only.Principles of OperationSuction Return Series filterThis one filter assembly is designed to carry out two specific functions:(1) <strong>Filter</strong> system return line oil.(2) Supply filtered oil under positive pressure to the closed loophydrostatic circuits.Principles of operation(1) Return oil from both the open and closed circuits* is fed into theSuction Return Series <strong>Filter</strong> at port ‘R’.(2) The filtered oil is maintained at a nominal 0.5 bar by the uniqueback pressure valve assembly and fed into the closed loophydrostatic circuit via port ‘S’.(3) Surplus filtered oil is fed back to the tank via the back pressurevalve assembly.(4) Emergency suction (anti-cavitation) valve: This valve is fitted asstandard to ensure oil is always available to the closed loop system,even on emergency occasions when the return flows do not meetthe flow demands of the closed loop circuit.Additional installation guidance notes(1) Return oil flow should always be greater than the oil flow ratedemanded by the closed loop charge pump.(2) Oil level at all times should not fall below valve assembly at thebase of the filter bowl.Benefits(1) Only one filter is required to supply filtered oil to both open andclosed loop circuits.(2) Feeding the closed loop circuit with filtered oil at a nominalpressure of 0.5 bar ensures excellent cold start characteristics,thus reducing the risk of cavitation.(3) Four hole mounting with gasket seal.(4) Microglass III filter element materials ensure; low pressure drop,high dirt holding capacity and extended service life.(5) Type Parker SR filters with patented LEIF ® element, unique drainconstruction, quick element replacement concept.* CAUTION:Back pressure in pump and motor drain lines should always be keptat a minimum thus protecting shaft seals etc.If case drain oils are to be fed through the return line filter pleaseconsult the pump/motor manufactures for details on maximumallowable back pressure.Ensure filter elements are replaced when element condition indicatorsshow that the bypass setting has been reached.Failure to observe the above operation and guidance notes, or use ofnon genuine Parker specified filter elements could cause damage tothe system. System designers should always ensure that adequatecooling capacity is available.73Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Suction Return SeriesTanktop Mounted Suction & Return Line<strong>Filter</strong>s - Types SR1 & SR2Pressure Drop Curves (Type SR1)The recommended level of the initial pressure drop is approximately 1 bar.If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:The total Δp = Housing Δph + (Element Δpe x working viscosity/32).SRL1 Empty Housing (Length Code 2) SRL1 (Element Length Code 2)Flow (US GPM)Flow (US GPM)Δp (bar)010.9133953 6614.513.10.80.711.610.20.68.70.57.30.45.80.34.40.22.90.11.500 50100 1500200Flow (l/min)Δp (PSID)Δp (bar)0 7 13 20 26 33 390.34.3510Q0.253.6320Q0.22.900.152.180.11.450.050.7300 25 50 75 100 1250150Flow (l/min)Δp (PSID)Curves are based on 32cSt fluid viscosity and 0.87 Kg/l density.Line represents the Δp of the housing including the back pressure valve.Pressure Drop Curves (Type SR2)Curves are based on 32cSt fluid viscosity and 0.87 Kg/l density.SRL2 Empty <strong>Filter</strong> Housing SRL2 <strong>Filter</strong> Element Length 2Flow (US GPM)0 13 26 39 53 661.014.5Flow (US GPM)0 13 26 39 53 660.350.8 11.6Empty Housing0.30.2510Q4.4Δp (bar)0.60.48.75.8Δp (PSID)Δp (bar)0.20.1520Q2.9Δp (PSID)0.22.90.10.051.5000 50 100 150 200 250Flow (l/min)000 50 100 150 200 250Flow (l/min)Line represents the Δp of the housing including the back pressure valve.74Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard products tablePart numberSRL1210QLBPGG161SRL1220QLBPGG161SRL2210QLBPGG201SRL2220QLBPGG201SupersedesSRL22Q10NP1B10SRL22Q20NP1B10Flow(l/min)130130250250ModelnumberSRL1SRL1SRL2SRL2ElementlengthLength 2Length 2Length 2Length 2Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.10201020Seals IndicatorNitrileNitrileNitrileNitrilePluggedPluggedPluggedPluggedBypasssettings1.7 Bar (25 Psi)1.7 Bar (25 Psi)1.7 Bar (25 Psi)1.7 Bar (25 Psi)PortsreturnG1G1G1 1 /4G1 1 /4PortssuctionG 3 /4G 3 /42xG12xG1IncludedoptionsNoneNoneNoneNoneReplacementelements937984Q937985Q937946Q937947QSupersedesSRE12Q10SRE12Q20SRE22Q10SRE22Q20Product configuratorConfigurator example SR filterBox 1SRL2Box 22Box 305QLBox 4BBox 5S6Box 6GBox 72G20Box 8IBox 1CodeModelSR1 Series with LEIF ® elementSR2 Series with LEIF ® elementBox 2<strong>Filter</strong> typeHousingCodeReduced length on requestStandard length2Extended length on requestBox 3ElementLEIF ®CodeSRL1SRL2Degree of filtrationLEIF ®Q3 glassfibre ßx(c) >200Code02QLHighlights Key (Denotes part number availability)Code05QL123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available within four weeksCode10QLCode20QLBox 4Seal typeSeal materialNitrileFluoroelastomerCodeBVBox 5IndicatorPressure gauge, setting 2.0 bar, G 1 /8Pressure switch 42V, 2.0 bar setting, NO with G 1 /8 BSPPressure switch 42V, 2.0 bar setting, NC with G 1 /8 BSPPressure switch 250V, NO/NC with G 1 /8No indicator, indicator port L+RpluggedVacuum switch / vacuum gaugeOther settings for indicators / gauges on requestCodeG5S6S7on requestPon requeston requestBox 6Bypass valveBypass valve1.7 bar2.5 barBlocked bypassOther bypass settingsCodeGIon requeston requestBox 7<strong>Filter</strong> connectionPortsReturn port 1xG1(ISO228) + Suction port 1xG 3 /4 (ISO228)Return port 1xG1 1 /4 (ISO228) + Suction port 2xG1(ISO228)Return port 2xG1 1 /4 (ISO228) + Suction port 2xG1(ISO228)Return port 1 x SAE20 + Suction port 2 x SAE16Return port 2 x SAE20 + Suction port 2 x SAE16CodeG16G202G20S202S20NoteSRL1SRL2SRL2SRL2SRL2Box 8OptionsOptionsNoneStrainer 120 micronDipstickPlugged vent port in cover (on request)Strainer 120 micron, dipstick and plugged vent portCustomized optionsCode1G6on requestIon requestßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222Mediacode02Q/02QL05Q/05QL10Q/10QL20Q/20QLNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Replacementelements937942Q937943Q937944Q937945Q937946Q937947Q937983Q937984Q937985QSpare elementsSupersedesSRR12Q05NSRR12Q10NSRR12Q20NSRE22Q05SRE22Q10SRE22Q20SRE12Q05SRE12Q10SRE12Q20Semi standardStandardStandardSemi standardStandardStandardSemi standardStandardStandardSuction Return - Series Seal KitsPart Number Description2049010065 NITRILE SEAL KIT SRL12049010061 NITRILE SEAL KIT SRL275Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
76Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PT Tank Top MountedfiltersMax. 400 l/min - 10 barAn economicalalternative forquality tank topmounted filtrationIn to out flow design avoidsre-contamination of thehydraulic systemThe PT tank top mounted filterfeatures an aluminium filter headand screw-in style filter elements.This offers the opportunity to usethe filter element as screw-in stylefor co-polymer reservoirs. With apatented design that protects thequality of filtration, the PT offers amodularity and value for money.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Compact tank top mounted return line filter.• <strong>Filter</strong> element can be used for direct screw-in mounting withco-polymer reservoirs.• Patented filter element.• In to Out flow avoids re-contamination of the system.• Flow capability up to 400 l/min at 10 bar working pressure.• Full options available July 2010.www.parkerhfde.com77Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PT Tank Top Mounted filtersMax. 400 l/min - 10 barFeatures & BenefitsFeaturesAluminium filter headIn-to-Out filtrationDisposable filter cartridgeMicroglass III mediaAdvantagesLow profile, lightweight and durableAll captured contamination retains insidethe elementEasy to change cartridgeMulti-layered design produces highcapacity and efficiencyBenefitsLess weight, smaller envelope and cleaner appearance.No recontamination of the system during change ofelementNew housing cover and seals provided witheach element changeReliable performance. Reduced downtimeTypical ApplicationsLorry mounted cranesAgricultural equipmentGrass cutting equipmentContainer hook loadersThe Parker Filtration PT tank topmounted seriesThe PT Series filter is available in various sizescovering a flow rate up to 400 l/min. Using theMicroglass III media in 2, 5, 10 and 20 microns itprovides premium particle removal efficiency.This unique design simply threads into a portedtank ring, which can be bolted to a metal reservoir.The disposable filter cartridge is a single-piececonstruction, which incorporates the nylon coverand integral 2 bar bypass valve. The flow path isinside-out and requires no special tools for service.This concept assures minimal installation costswith the least space requirements for return lineapplications.78Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Max. 10 bar.ConnectionsPT2: G¾” and G1”PT4: G1”or G1¼”<strong>Filter</strong> housing:Aluminium<strong>Filter</strong> element:Patented design including cover for filter housing (one disposableunit)Seal material:Nitrile, FluoroelastomerOperation temperature:-20°C to + 100°CBypass:1.7 barDegree of filtration:Determined by multipass test in accordance to ISO16889Flow fatigue:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved(ISO3724)<strong>Filter</strong> Media:Microglass IIIIndicator options:Visual and electrical switch (NO/NC) typeFluid compatibility:Mineral and HEES type fluidsPrinciple of FiltrationThe PT applies In-to-Out Filtration, this ensures that captured contamination is retained in the element duringservicing the filter.Bypass valve is integrated in the filter bottom element end cap. The filter element is completely disposable.Safety FirstEach spare filter element is including seals for the sealing between tank top mounted filter housing and filter element.Because all seals are pre-mounting, no risk that (incorrect) seals are not replaced.PT Reservoir ‘screw-in’ solution to reduce costs and spaceThe PT applies In-to-Out Filtration, this ensures that captured contaminationis retained. The PT element can be integrated directly into a co-polymer reservoir.Parker Filtration can provide cavity details to co-polymer reservoirmanufacturers to support this innovative solution.This cavity includes the integrated return line port and optional connectionfor the pressure switch.Thanks to the complete screw-in style solution, typically over 30% of the firstfit cost can be reduced, the reservoir surface remains flat and hence cansupport more compact solutions, in particular for mobile applications.Compared to the traditional tank top mounted filter, improved sealingbetween the reservoir and the filter can be achieved, eliminating potentialleakage areas by 50% typically.Please consult Parker Filtration for engineered reservoir solutionsImportant information when applying airtightfunnelsRecommended opening in the tank top plate for the PTsupplied with air tight funnel:PT2 : 63.5 mm +/- 0.2 mmPT4 : 98.5 mm +/- 0.2 mmInstallation InformationPT2 Length 1PT2 Length 2PT2 Length 3PT4 Length 1PT4 Length 1PT4 Length 1Build in length in tank (mm)951852809818931079Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PT Tank Top Mounted filtersMax. 400 l/min - 10 barSpecification (cont)PT2 Assembly without funnel16mm HEXTORQUE LOAD13 - 16 NmKbH3ELEMENT REMOVAL CLEARANCEØD2Ødhh1AAØD145°R1R1/8 BSP (2x)H190°PT2 Screw-in <strong>Filter</strong>ØDH2MINIMUM CLEARANCEFROM TANK BOTTOMType Connection Options H1 H2 H3 h h1 ØD ØD1 ØD2 b R R1 KPT2-1 G3/4, G1 78 6,5 190 25.4 56 Ø46 Ø51 Ø64 53 48 12 4x8,8PT2-2 G3/4, G1 181 6.5 293 25,4 56 Ø46 Ø51 Ø64 53 48 12 4x8,8PT2-3 G3/4, G1 277 6,5 389 25,4 56 Ø46 Ø51 Ø64 53 48 12 4x8,8PT2 Assembly with funnelK16mm HEXTORQUE LOAD 13-16 NmbH3ELEMENT REMOVAL CLEARANCEØD2Ødhc 0,23,2h1ØD1CCR145°H1R1/8 BSP (2x)90°ØDH2MINIMUM CLEARANCEFROM TANK BOTTOMPT2 Screw-in <strong>Filter</strong>Type Connection Options H1 H2 H3 h h1 ØD ØD1 +/–0,5 ØD2 b R R1 KPT2-1 G3/4, G1 78 6,5 190 25.4 56 Ø62 Ø64 Ø64 53 48 12 4x8,8PT2-2 G3/4, G1 181 6.5 293 25,4 56 Ø62 Ø64 Ø64 53 48 12 4x8,8PT2-3 G3/4, G1 277 6,5 389 25,4 56 Ø62 Ø64 Ø64 53 48 12 4x8,880Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
RRhhSpecification (cont)PT4 Assembly without funnelKb24mm HEXTORQUE LOAD23 - 27 NmH3ELEMENT REMOVAL CLEARANCEØD2Ødh1AA36°ØD1R11/8" BSP (2x)H172°PT4 Screw-in <strong>Filter</strong>Type Connection Options H1 H2 H3 h h1 ØD ØD1 ØD2 b R R1 KPT4-1 G1, G1-1/4 94 10 222 28.2 64 Ø78.5 Ø85 Ø103 69 70 12 5xØ8,8PT4-2 G1, G1-1/4 185 10 313 28.2 64 Ø78.5 Ø85 Ø103 69 70 12 4xØ8,8PT4-3 G1, G1-1/4 306 10 434 28.2 64 Ø78.5 Ø85 Ø103 69 70 12 4xØ8,8ØDH2MINIMUM CLEARANCEFROM TANK BOTTOMPT4 Assembly with funnelKbØD224mm HEXTORQUE LOAD23 - 27 NmH3ELEMENT REMOVAL CLEARANCEØdc 0,2h13,2AAØD136°H1R11/8" BSP (2x)72°PT4 Screw-in <strong>Filter</strong>Type Connection Options H1 H2 H3 h h1 ØD ØD1 +/–0,5 ØD2 b R R1 KPT4-1 G1, G1-1/4 94 10 222 28.2 64 Ø97 Ø99 Ø103 69 70 12 5xØ8,8PT4-2 G1, G1-1/4 185 10 313 28.2 64 Ø97 Ø99 Ø103 69 70 12 5xØ8,8PT4-3 G1, G1-1/4 306 10 434 28.2 64 Ø97 Ø99 Ø103 69 70 12 5xØ8,8ØDH2MINIMUM CLEARANCEFROM TANK BOTTOM81Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PT Tank Top Mounted filtersMax. 400 l/min - 10 barPressure Drop Curves (Type SR1)Flow Performance Charts - PT2 SeriesΔp (bar)PT2 Length 11.81.602Q26.123.21.420.305Q1.217.4114.50.810Q11.60.68.720Q0.45.80.22.900 20 40060Flow (l/min)Δp (PSID)Δp (bar)All delta-p values are based on 30 cSt fluid and 0,87 kg/l densityPT2 Length 21.826.11.623.202Q1.420.31.2105Q17.414.50.80.60.40.210Q20Q11.68.75.82.900 30 60090Flow (l/min)Δp (PSID)Flow Performance Charts - PT4 SeriesΔp (bar)PT4 Length 11.81.602Q26.123.21.420.31.217.4105Q14.50.811.60.60.40.210Q20Q8.75.82.900 50 100 1500200Flow (l/min)Δp (PSID)Δp (bar)PT4 Length 21.81.602Q26.123.21.420.31.2105Q17.414.50.80.60.40.210Q20Q11.68.75.82.900 50 100 150 200 2500300Flow (l/min)Δp (PSID)82Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Flow Performance Charts - PT4 SeriesΔp (bar)PT4 Length 31.81.602Q26.123.21.420.31.217.4105Q14.50.80.60.40.210Q20Q11.68.75.82.900 50 100 150 200 250 300 3500400Flow (l/min)Indicator InformationIndicator PS NO/NC pressure switchProtective coverΔp (PSID)Normally open contacts74Normally closed contacts5524 A/F9G 1 /8 (BSP)Ø28Elec. ratingThread connectionElec. connectionProtectionSwitch typeCodeSpecifications42V/2AG 1 /8AMP terminal 6.3 x 0.8IP65 (terminal IP00)NO or NCFMUS2EBMG02L (NO switch)FMUS3EBMG02L (NC switch)83Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationProduct configuratorConfigurator example PT filterBox 1PT2Box 21Box 310QBox 4BBox 5PBox 6GBox 7G12Box 8IBox 1HousingPT2PT4Box 2Element LengthLength 1Length 2Length 3 (PT4 only)CodePT2PT4Code123Highlights Key (Denotes part number availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available within four weeksBox 3Box 4<strong>Filter</strong> media (Microglass III)CodeSeal MaterialCode2 micron5 micron10 micron20 micron02Q05Q10Q20QNitrileVitonBVBox 5Box 6IndicatorCodeBypass ValveCodePlugged portPressure Switch 24V, 1.2 bar setting, NOPressure Switch 24V, 1.2 bar setting, NCPS2S31.7 barGBox 7Box 8PortsCodeOptionsCodeG 3 /4 (PT2 only)G1G1 1 /4 (PT4 only)G12G16G20No diffuser requiredAirtight diffuser14Spare <strong>Filter</strong> ElementsMedia PT2-1 PT2-2 PT4-1 PT4-2 PT4-320Q 936753Q 936757Q 936745Q 936749Q 936879Q10Q 936752Q 936756Q 936744Q 936748Q 936878Q05Q 936751Q 936755Q 936743Q 936747Q 936877Q02Q 936750Q 936754Q 936742Q 936746Q 936876Q<strong>Filter</strong> Media Efficiencyßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222Mediacode02Q/02QL05Q/05QL10Q/10QL20Q/20QLNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.84Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Maxiflow SeriesSpin-on <strong>Filter</strong>sMax. 360 I/min - 10 barDesigned for bothsuction and returnapplicationSpin-on filters withintegrated indicatorThe Maxiflow Series full flow filtersfor suction or return feature twointegrated red/green indicators.Maximum pressure 10 bar. Maximumflow 360 l/min. A proven filter in manymobile and industrial applications fromrefuse vehicles to industrial powerunitsContact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Maxiflow full flow filters for suction or return applications.• Available with a variety of integrated and add-on indicators.• Maximum pressure 10 bar. Maximum flow 360 l/min.• High quality filter medium.www.parkerhfde.com85Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Maxiflow SeriesSpin-on <strong>Filter</strong>sMax. 360 I/min - 10 barFeatures & BenefitsFeaturesIntegrated indicatorHigh quality paint for canistersSpin-on filters available for suctionand return line filtrationHigh quality filter mediumAdvantagesCompact and robust durable constructionLong term protection against corrosionFlexible product offering<strong>Filter</strong> medium suitable for fatigue load due tohigh frequent flow fluctuationBenefitsEasy identification of element statusImproved protection of filter mediumStandardisation of componentsExtended element life timeTypical ApplicationsTelescopic handlersRefuse vehiclesRoad sweepersCompactorsIndustrial power unitsGrass cuttersPress brakesThe Parker Filtration Maxiflow Full Flow<strong>Filter</strong>s for Suction or Return.Maxiflow type MXA8 and MXA9 feature twointegral red/green indicators incorporated into thehead. Fitted as standard, they ensure maximumindicator visibility and early warning of filtercondition.Maxiflow type MXA7 features one integral indicator.86Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPreferred Series MXAPS SeriesMaximum working pressure: 10 bar 10 bar<strong>Filter</strong> head material: Aluminium LM24 Aluminium alloy<strong>Filter</strong> bowl material: Steel SteelSeal material: Nitrile Buna (nitrile)Operating temperature range: -30°C to +90°C -30°C to +110°CBypass: Return line 1.05 bar Return line 1.5 barSuction line 0.17 barSuction line 0.10 barNo bypass optionNo bypass optionFluids: Mineral oils Mineral oilsElement media: Microglass III media Microglass III mediaCellulose mediaCellulose mediaInstallation DetailsMXA.8/MXA.9*** 12PS/22PS MXA.7***D BACFGHDBCAFInlet702 mounting holes‘L’FØ129HJ123 (4.84) 70102 (4.01) (2.75)Minimum forelement removalMinimum for elementremoval20ØJ2 mounting holes‘L’12PS-1522PS-20Element removalclearanceKHKC20(0.79)D20(0.79)Minimum forelement removalL<strong>Filter</strong> selectionTo select the correct filter use the appropriatepressure drop graphs. For details and an exampleof how to select the correct filter, see next page.MBØ54 (2.12)A2 ports 1 /8” BSPT foroptional indicatorsCircuit symbolTypeA B C D F G H J K L MMXA.812PSMXA.922PSMXA.7G 3 /4G1 1 /4G1 1 /219(0.75)22(0.86)30(1.18)28(1.10)430(16.93)147(5.79)165(6.49)179(7.04)208(8.19)179(7.05)173(6.81)187(7.36)213(8.38)236(9.29)214(8.42)95(3.74)95(3.74)133(5.24)133(5.23)140(5.51)97(3.82)N/A129(5.08)N/AN/A38(1.49)38(1.49)50(1.97)50(1.97)65(2.56)94(3.7)93(3.66)127(5.0)130(5.12)127(5.0)88(3.46)107(4.21)130(5.12)N/AM8 x1.25 x 16full depthM10 x 1.572(2.83)N/A72(2.83)N/A87Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Spin-on <strong>Filter</strong>sMaxiflow SeriesPressure Drop CurvesThe recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.If the medium used has a viscosity different from 30cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp30 x viscosity of medium used) / 30cSt.Maxiflow (MXA.8*** Series) and 12PS Series<strong>Filter</strong> HousingFlow (US GPM)<strong>Filter</strong> ElementFlow (US GPM)0 3 5 8 11 13 16 18 21 24 26 291.03114.50 3 5 8 11 13 16 18 21 24 26 29 310.57.30.811.60.45.8Δp (bar)0.60.48.75.8Δp (PSID)Δp (bar)0.30.210μ Abs10μ Nom4.42.9Δp (PSID)0.22.90.11.5000 10 20 30 40 50 60 70 80 90 100 110 120Flow (l/min)000 10 20 30 40 50 60 70 80 90 100 110 120Flow (l/min)Maxiflow (MXA.9*** Series) and 22PS Series<strong>Filter</strong> Housing<strong>Filter</strong> ElementFlow (US GPM)0 5 11 16 21 26 31 37 42 47 53 580.4615.810.8<strong>Filter</strong> Element10μ Abs.0.34.43μ Abs.Δp (bar)0.22.9Δp (PSID)delta p (bar)0.60.410μ Nom.3 Abs.10 Abs.10 Nom.0.11.50.2000 20 40 60 80 100 120 140 160 180 200 220 240Flow (l/min)00 20 40 60 80 100 120 140 160 180 200 220 240Flow (l/min) @32 cStMaxiflow (MXA.7*** Series)<strong>Filter</strong> Housing<strong>Filter</strong> ElementFlow (US GPM)Flow (US GPM)Δp (bar)00.713 26 39 53 66 79 920.60.50.40.30.20.110610.28.77.35.84.42.91.5Δp (PSID)Δp (bar)00.80.70.613 26 39 53 66 79 920.510μ Abs0.410μ Nom0.30.20.110611.610.28.77.35.84.42.91.5Δp (PSID)000 50 100 150 200 250 300 350 400Flow (l/min)00 50 100 150 200 250 300 3500400Flow (l/min)Note: All above data is calculated at 30cSt Rel density 0.856.88Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationType Part number DescriptionMXA.8*** & 12PS Return Line <strong>Filter</strong>sMXAPSMXA855142412PS10BTV1R2BAssembly with bypass & dual visual indicatorsAssembly with bypass & gauge type visual indicatorsMAOP Flow MediaReplacementPorts(bar) (l/min) rating element107010 micronabs.G 3 /4MXR8550MXAPSMXA851142412PS10CTV1R2B12PS10CTE2R2B12PS10CTPR2BAssembly with bypass & dual visual indicatorsAssembly with bypass & gauge type visual indicatorsAssembly with bypass & electrical pressure indicatorAssembly with bypass & no indicator107010 micronnom.G 3 /4MX1518410(x4*)MXA.8*** & 12PS Suction Line <strong>Filter</strong>sMXAPSMXAPSMXA851122312PS10CTV1S4BMXA851022312PS10CTV1SX4BAssembly with bypass & dual visual indicatorsAssembly with bypass & gauge type visual indicatorAssembly without bypass, with dual visual indicatorsAssembly without bypass, with gauge type visual indicator102010 micronnom.G 3 /4MX1518410(x4*)MXA.9*** & 22PS Return Line <strong>Filter</strong>s3 micronMXA MXA9561424 Assembly with bypass & dual visual indicators 10 30G1 1 /4 MXR9560abs.3 Micron abs. filtration for Off-Line and Bypass System Clean UpMaxiflow 3 micron elements are ideal for off-line or bypass clean up applications. These can be specified for the 9*** and 7*** series return line filtersMXAPSPSPSMXA955142422PS10BTV1R2D22PS10BTE2R2D22PS10BTPR2DAssembly with bypass & dual visual indicatorsAssembly with bypass & gauge type visual indicatorsAssembly with bypass & electrical pressure indicatorAssembly with bypass & no indicator1018010micronabs.G1 1 /4MXR9550MXAPSPSPSMXA951142422PS10CTV1R2D22PS10CTE2R2D22PS10CTPR2DAssembly with bypass & dual visual indicatorsAssembly with bypass & gauge type visual indicatorAssembly with bypass & electrical pressure indicatorAssembly with bypass & no indicator1018010micronnom.G1 1 /4MX1591410(x4*)MXA.9*** & 22PS Suction Line <strong>Filter</strong>sMXAPSMXAPSMXA951122322PS10CTV2S4DMXA951102322PS10CTPSX4DAssembly with bypass & dual visual indicatorsAssembly with bypass & gauge type visual indicatorAssembly without bypass, with visual indicatorsAssembly without bypass, no indicator104810micronnom.G1 1 /4MX1591410(x4*)MXA.7*** Return Line <strong>Filter</strong>s10 micronMXA MXA7551424 Assembly with bypass & visual indicator 10 300G1 1 /2 MXR9550abs.MXA MXA7511424 Assembly with bypass & visual indicator1035010 micronnom.G1 1 /2MX1591410(x4*)MXA.7*** Suction Line <strong>Filter</strong>sMXAMXA7551223MXA7551023Assembly with bypass & visual indicatorAssembly without bypass with visual indicator108010 micronabs.G1 1 /2MXR9550MXAMXA7511223MXA7511023Assembly with bypass & visual indicatorAssembly without bypass with visual indicatorThe Maxiflow Series 7*** can be specified with additional visual or electrical indicators. Please consult Parker Filtration for details108010 micronnom.G1 1 /2MX1591410(x4*)Note: Elements marked with (x4*) are only available in packs of 489Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
When it comes to replacement hydraulic filter elements there is only one solution:The ParFit interchange element range.With over 30,000 standard, off-the-shelf variations, there is a ParFit element tofit most sizes and makes of OEM filters on mobile, construction, agricultural andindustrial plant.Every ParFit filter element is manufactured in <strong>Europe</strong> to the highest standards andis backed by our unrivalled technical support and money-back guarantees.That means that you can reduce stockholdings, cut costs and be sure of theultimate performance, with long, trouble-free operating life.ParFit filters are available from ParkerStores and authorised distributorsthroughout the UK. To find your nearest ParkerStore Email filtrationinfo@parker.comor find the ParFit you need using our element selector at www.parkerhfde.com.90Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ATZ SeriesSuction <strong>Filter</strong>sMax. 300 I/minWhen the ultimateprotection is criticalCompact and robust castaluminium filter designThe ATZ Series locate below tankoil level offering maximum protectionfor the hydraulic system pump. Prefiltrationtakes place by means of amagnetic column. Maximum flow 300l/min. Suitable for heavy duty industrialapplications and recommended forreservoirs with high contaminationingress.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• ATZ submersible suction filters locate below tank oil level.• Pre-filtration takes place by means of a magnetic column.• Maximum flow 300 l/min.• In-to-Out filter stops contaminated oil leaking back into thesystem.www.parkerhfde.com91Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ATZ SeriesSuction <strong>Filter</strong>sFeatures & BenefitsFeaturesCast aluminium constructionIntegrated check valveMagnetic pre-filtrationIn-to-Out filtrationWide range of vacuummeasurement devicesAdvantagesCompact and robust durable construction<strong>Filter</strong> element can be changed when the filterhousing is submerged under the oil in the tankRemoves ferrous particles, even during bypassconditionsAll captured contamination retains inside theelementContinuous filter condition monitoringBenefitsSuitable for heavy duty industrialapplicationsImproved protection of sophisticatedpumpsImproved fluid cleanliness levelsExtended element life timeNo recontamination of system duringchange of elementsContributes to just-in-time serviceImproved protection of pumpwhen pressure measurementdevice connected with pump drivemanagementTypical ApplicationsWool untangling machine<strong>Hydraulic</strong> winchPower packs withsophisticated pumpsDrilling blocksThe Parker Filtration ATZ Series SubmersibleSuction <strong>Filter</strong>s.ATZ <strong>Filter</strong>s are located below the tank’s oil level, offeringmaximum protection for the hydraulic system pump. Whenremoving the element, the check valve closes automatically,eliminating any chance of oil leakage. Pre-filtration takesplace by means of a magnet column. Thanks to the ‘In-to-Out’ filter principle, contaminated oil cannot leak back intothe system. ATZ <strong>Filter</strong>s are capable of handling nominal flowrates up to 300 l/min.92Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationOperating pressure:Vacuum.Assembly:Suction line filter, mounted horizontallyagainst tank side.Connections:Threads G1 1 /2 (ISO 228) or flanges 2”SAE-300PSI.<strong>Filter</strong> housing:Aluminium.Seal material:Nitrile, neoprene, fluoroelastomer.Operating temperature range:Seal material Nitrile: -40˚ to +100˚C.Seal material Fluoroelastomer: -20˚ to+130˚C.Bypass valve:Blocked.Degree of filtration:Determined by multipass test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved.Filtration media:Microglass III.10μ cellulose and 40μ Stainless Steel.Element collapse rating:10 bar (ISO 2941).Pressure indicator options:0.15 bar or 0.30 bar (vacuum gauge).125-250VAC (LI-0, 5A, Lr-2, 0A) (electrical vacuum switch).12-28Vdc (Li-1, 0A, Lr-3, 0A) (electrical vacuum switch).Features:Unique check valve, enabling element change below oil level.<strong>Filter</strong> element:Element with steel end caps.123ATZ-120123ATZ-300Protective cover4474561718561755924 A/F18M10x1Ø287891011121314151678910111213141516ATZ-120 & ATZ-300Ref. No. Description Ref. No. Description1 1 Bolt10 1 Valve support2 1 Seal ring 11 1 Nut3 1 Insert 12 1 O-ring4 1 O-ring 13 1 Valve5 1 Element 14 1 Ring6 1 O-ring 15 1 Spring7 1 <strong>Filter</strong>-housing 16 1 Valve-housing8 1 Gasket 17 1 Bonded seal9 1 O-ring 18 1 Indicator93Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ATZ SeriesSuction <strong>Filter</strong>sSpecification (cont.)ATZ-120Min element clearance300Ø160140Ø8.5Indicator55ISO 228 G1 (BSP)PCD 14032Visual 100Elect 135ISO 228 G1 (BSP)76519+1Ø125Tankhole403ISO 228 G1 1 /2 (BSP)0224270277Max torque-loadfilter-tank 18NmThe Parker suction filters, type ATZ, are designed forsubmerged operation. The filters contain a unique check valvewhich automatically closes when the filter insert is removedfrom the housing, thus enabling element change below oil level.Construction is based on the field proven Parker <strong>Filter</strong> System.Ø110ATZ-300Min element clearance300IndicatorISO 228 G1 1 /2 (BSP)PCD 19555Ø11Visual 130Elect 155ISO 228 G1 1 /2 (BSP)70198111Ø170 Tankhole +10398Ø218236AA2 1 /2” SAE (3000psi)Max torque-loadfilter-tank 45NmM128950.8Ø63View A-A94Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop CurvesThe recommended level of the initial pressure drop for suction filters is 0.03 bar.If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp32 x viscosity of medium used) / 32cSt.<strong>Filter</strong> housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.ATZ 1-120 (G1 1 /2) Empty HousingFlow (US GPM)0 3 5 8 11 13 16 18 21 24 26 29 31 340.050.73ATZ 300 (2 1 /2 SAE FLANGE) Empty HousingFlow (US GPM)0 13 26 39 53 66 79 920.050.730.040.580.040.58Δp (bar)0.030.020.440.29Δp (PSID)Δp (bar)0.030.020.440.29Δp (PSID)0.010.150.010.1500 10 20 30 40 50 60 70 80 90 100 110 120 130Flow (l/min)0000 50 100 150 200 250 300 350Flow (l/min)ATZ120 <strong>Filter</strong> Element Length 1ATZ300 <strong>Filter</strong> Element Length 2Flow (US GPM)Flow (US GPM)Δp (bar)0 5 11 16 21 26 31 370.811.60.702Q0.605Q0.50.410Q0.320Q0.20.1000 20 40 60 80 100 120 140Flow (l/min)10.28.77.35.84.42.91.5Δp (PSID)Δp (bar)0 5 11 16 21 26 31 3711.602Q10.20.80.70.60.50.40.30.20.10005Q10Q20Q50 100 150 200 250 300Flow (l/min)8.77.35.84.42.91.50Δp (PSID)Δp (bar)0 5 11 16 21 26 31 370.22.90.150.1ATZ120 <strong>Filter</strong> Element Length 1(cellulose and stainless steel)Flow (US GPM)10C0.05040W0.73120W00 20 40 60 80 100 1200140Flow (l/min)2.181.5Δp (PSID)Δp (bar)00.0813 26 39 53 66 79 921.160.071.020.060.050.040.030.020.01ATZ300 <strong>Filter</strong> Element Length 2(cellulose and stainless steel)Flow (US GPM)10C120W0.58040W0.44000 50 100 150 200 250 300 350Flow (l/min)0.870.730.290.15Δp (PSID)95Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ATZ SeriesSuction <strong>Filter</strong>sOrdering InformationStandard products tablePart numberATZ110CBPXG241ATZ110QBPXG241ATZ210CBPXR481ATZ210QBPXR481SupersedesATZ120-G1 1 /2 FXX1-R-10 B MATZ120-G1 1 /2 FXW1-R-10 B MATZ300-S2 1 /2-C FXX3-10 B MATZ300-S2 1 /2-C FXW3-10 B MFlow(l/min)120120300300ModelnumberATZ120ATZ120ATZ300ATZ300ElementlengthLength 1Length 1Length 2Length 2Mediarating (μ)10 NOM10 ABS10 NOM10 ABSSeals IndicatorNote: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.Product configuratorConfigurator example ATZ filterBox 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8ATZ210CBU2XR481NitrileNitrileNitrileNitrilePluggedPluggedPluggedPluggedBypasssettingsBlockedBlockedBlockedBlockedPortsG1 1 /2"G1 1 /2"2 1 /2" SAE-3000 PSI2 1 /2" SAE-3000 PSIIncludedoptionsNoneNoneNoneNoneReplacementelements937958937964Q937959937965QSupersedesFXX1-R-10FXW1-R-10FXX3-10FXW3-10Box 1CodeATZBox 2<strong>Filter</strong> typeHousingATZ 1-120ATZ 2-300Code12Box 3Element mediaDisposable elementCelluloseNom. rating10CDegree of filtrationGlass fibreMicroglass III (for disposable elements)02Q05Q10Q20QWire meshAbs. rating040WBox 4Seal typeSeal materialNitrileFluoroelastomerNeopreneCodeBVNBox 5IndicatorVacuum gauge, setting -0.15 bar, M10x1Vacuum gauge, setting -0.3 bar, M10x1Vacuum switch 42V, -0.15 bar setting, NO/NC, M10 x 1Vacuum switch 42V, -0.30 bar setting, NO/NC, M10 x 1Vacuum switch 250 VAC, -0.15 bar setting, NO/NC, M10 x 1Vacuum switch 250 VAC, -0.30 bar setting, NO/NC, M10 x 1No indicator, indicator ports not machinedNo indicator, indicator port pluggedOther settings for indicators / gauges on requestCodeU1U2V1V2V3V4NPon requestBox 6Bypass valveBypass valveBlocked bypassCodeXBox 7<strong>Filter</strong> connectionPortsG1 1 /2" +2xG1"(For ATZ 1-120 only)2 1 /2" SAE-3000 PSI +2 x G1 1 /2" (For ATZ 2-300 only)ATZ 1-120Part number spare elementATZ 2-300Part number spare elementFXX1-R-10937958FXX3-10937959CodeG24R48Highlights Key (Denotes part number availability)123123123123ßx(c)=250.0%N/AN/AN/A6Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items areavailable within four weeksSpare element tableFXW1-R-2937960QFXW3-2937961QBox 8OptionsOptions for ATZ 1-1201xG1 1 /2" +1xG1"pluggedNot plugged1 x G1" right plugged2 x G1" left & right pluggedSpecialFXW1-R-5937962QFXW3-5937963QOptions for ATZ 2-3002 1 /2 SAE with blind counterflangeNo counterflangeSpecialDegree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222FXW1-R-10937964QFXW3-10937965QATZ Series Seal KitsPart Number Description2049010001 NITRILE SEAL KIT ATZ12049010060 FLUOROEL<strong>AS</strong>TOMER SEAL KIT ATZ12049010002 NITRILE SEAL KIT ATZ296Mediacode02Q05Q10Q20QFXW1-R-20937966QFXW3-20937966QSF1-R-40937967SF3-40937968Code1QRPon request1Qon requestVisual indicatorSetting-0.3 barThread connection M10x1CodeFMUU2VBMM10LElectrical switchSetting-0.3 barThread connection M10x1Switch type NO or NCElec.connection AMP terminal 6.3x0.8ProtectionIP54 (terminal IP00)Performance 125-250 VAC (Li 0,5A, Lr 2,0A max)12-28 Vdc (Li 1,0A, Lr3,0A max)CodeFMUV2VBMM10LNote 1: Part numbers featured with bold highlighted codeswill ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection willrequire you to contact Parker Filtration for availability.Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
12<strong>AS</strong> SeriesCoreless Spin-on <strong>Filter</strong>Max. 75 l/min -35barEnvironmentallyfriendly alternativefor spin-in filtrationLightweight, non-metallicelement that can beincineratedThe 12S Series features apatented,re-usable coreless Ecoglass lllelement in areplaceable bowl foreasy used element removal anddisposal. Maximum pressure 35 barand the Ecoglass element offers alowenvironmental impact in landfills.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:•12S features apatented, re-usable coreless Ecoglass lllelement.•Replaceable bowl design for easy element removal.•Maximum pressure 35 bar.•Aneco filter solution for hydraulic systems.•Full options available July 2010.www.parkerhfde.com97Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Coreless Spin-on <strong>Filter</strong>s12<strong>AS</strong> SeriesThe Smart Alternativeto Spin-on Cans!Features:Parker engineershavedeveloped an innovativealternativetothe age old spin-on stylecan. Thisnewdesign provides all of the benefits of highefficiency,long lifeEcoglassIII filtration, withoutthe environmental impact.The newenvironmentally-friendly12<strong>AS</strong> hydraulicfiltersfeatureareuseablebowland apatentedfilter element constructed primarilyofnylonand fiberglass. The element core is permanentlyattached as part of the filter bowl. When replaced,the element reduces costs, eliminates hot drainrequirements, canbeeasilyincinerated, and isbetter-suited formostlandfills.The 35 bar filter is ratedupto220 l/min, withpremium EcoglassIII elements as standardofferings. The patented element design alsoprevents filter operation if the proper element isnot in place.Applications:MobileAgMobileConstructionMaterial HandlersAerial LiftsPilot linesCharge pump hydrostatic drivesIndustrial powerunitsMachine toolsFeature Advantage Benefit• 35 bar operating pressure • Withstands pressuresurges, allows • Broader applications comparedapplication versatility.tolowerrated spin-on cans.• Patented element • Provides head-to-bowl seal. • Provides optimum leak-free• Mustbeinstalled foroperation. performance.• Ensures original element• Meets systemcleanlinessmustbeused.requirements.• CorelessEcoglasselements • Lightweight, non-metallic. • Reduces disposal costs.• Ease of serviceand disposal. • Can be incinerated.• Lowenvironmental impactin landfills.• Spin-on filter assembly • Improved, cost-effectivedesign. • Easy to maintain.w/re-usablebowl98Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationsPressure Ratings:Maximum AllowableOperating Pressure (MAOP):35 bar (500 psi)Fatigue: 27.6 bar (400 psi)1,000,000 cycles: 27.6 barDesign Safety Factor: 2.5:1Operating Temperatures:Buna: -40ºC to 107ºCElement Collapse Rating:10.3 bar (150 psid)Element Condition Indicators:Gauge: 0-4.15 bar color coded(For use in low pressureapplications only.)Pressure Switch: normally open,1.45±2bar,5A@24VDC(For use in low pressureapplications only.)Materials:Head: die cast aluminiumBypass valve: nylon with steel spring<strong>Filter</strong> element: fibreglass and polyesterwith nylon endcapsBowl: steelPermanent core: steelWeights (approximate):12<strong>AS</strong>-2................. 1.4 kg (3lbs.)12<strong>AS</strong>-2TYP.27.5mmTYP.1/8-27NPTGAGE PORT4 PLACES1/4-20 UNC-2B, .38 MINFULL THREAD DEPTH2 PLC'SSECTION A-ATorque TORQUE:40 30--47.5 35 FT.-LBS. Nm296mm ± 15 (12<strong>AS</strong>-2)INLETOUTLETPORTS AVAILABLESAE 12G 3/43/4" NPTBOTH SIDES25mmMINIMUMELEMENTREMOVALCLEARANCEA38mmA32mmHEX.83mm Ø27.5mmTYP.27.5mmTYP.1/4-20 UNC-2B, .38 MINFULL THREAD DEPTH2 PLC'S95mm99Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Coreless Spin-on <strong>Filter</strong>s12<strong>AS</strong> Series12<strong>AS</strong>-2 PerformanceBeta RatingEfficiencyEfficiency %PSIDCapacityBAR100005010002Q5Q10Q99.9402Q5Q10Q20Q320099.530210099.020Q202095.01102 50.00 4 8 12 16 2000 10 20 30 40 500Micron Size (c)Capacity gramsResults typical from Multi-pass tests run per test standard ISO 16889 @ 15 gpm to 50 psid terminal - 10 mg/L BUGLRefer to Appendix for relationship to test standard ISO 4572.LPMFlow vs Pressure LossLPM015 30 45 60 75 90 105 015 30 45 60 75 90 105252030cSt1.52520150SUS 30cStEmpty Housing1.5PSID151052Q5Q10Q20Q1.00.5PSIDBAR151053/4” Nominal Port Size1.00.5BAR00 5 10 15 20 25 300.000 5 10 15 20 25 300.0GPMGPM100Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Coreless Spin-on <strong>Filter</strong>s12<strong>AS</strong> SeriesService Instructions 12<strong>AS</strong><strong>Filter</strong> Service<strong>Filter</strong> element should be replaced as indicated by filter indicatorgauge,or at specified service intervals recommended by the OEM.Replacement element procedureA. Shut down system and release pressure in the filter line.B. Loosen bowl and remove rotating counter clockwise.C. Remove dirty element from filter head and discard.D. Lubricate element seals on clean element and installon filter head element locator.E. Install reuseable bowl onto element and filter head.Tighten to specified torque.123Parts ListIndex12<strong>AS</strong>1 HeadSAE-12 9376003/4" NPT 937612G3/4" BSPP 940898SAE-20N/A1 1/4" NPT N/AG1 1/4" BSPP N/A2 Bypass1.72 bar assembly 9289793.4 bar assembly 9289813 ElementSingle02QEN/A05QEN/A10QEN/A20QEN/ADouble02QE940765Q05QE940764Q10QE940763Q20QE940762Q4 BowlSingleN/ADouble 9375995 Gauge3.4 bar bypass 9366281.72 bar bypass 9369126 Pressure Switch3.4 bar bypass 9346171.72 bar bypass 92692345 6.369.11.5138.41/8 NPTTHREADIndicator Gauge (1.72 bar)1.5840.1Linear Measure = inchesmmPressure Switch101Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Coreless Spin-on <strong>Filter</strong>s12<strong>AS</strong> SeriesHow To OrderSelect the desired symbol (in the correct position) to construct a model code.Example:BOX1 BOX2 BOX3 BOX4 BOX5 BOX6 BOX7 BOX812<strong>AS</strong> 2 10QE B P G S12 1BOX 1: Basic AssemblySymbolDescription12<strong>AS</strong>Coreless Spin-On, 75 l/min nominalBOX 6: BypassSymbolGKDescription1.7 bar (25 PSID)3.5 bar (50 PSID)BOX 2: LengthSymbolDescription2 DoubleBOX 3: Element MediaSymbolDescription02QEEcoglass III,2µm05QEEcoglass III,5µm10QEEcoglass III,10µm20QEEcoglass III,20µmBOX 4: SealsSymbolDescriptionBNitrile (NBR)Consult Factory for additional seal optionsBOX 5: IndicatorSymbolDescriptionPGauge Ports (4) PluggedReplacement Elements (Ecoglass)BOX 7: PortsSymbolDescriptionS12SAE-12 integral threads*N123/4" NPT integral threadsG12G¾" BSPP (ISO 220) integral threads*Porting recommended for best delivery.BOX 8: OptionSymbolDescription1 No optionsAccessories<strong>Filter</strong> Model - Nitrile seals Part Number DescriptionMedia 12<strong>AS</strong>-2 50<strong>AS</strong>-1936912 Pressure gauge, 2" 0-4.7 bar (1.7 bar bypass)02QE 940765Q 940616Q936628 Pressure gauge, 0-6.9 bar (3.5 bar bypass)05QE 940764Q 940617Q926923 Pressure switch, 1.3 ± 0.1 bar 5A @ 2410QE 940763Q 940618QVDC (1.7 bar bypass)20QE 940762Q 940619Q 934617 Pressure switch, 3 ± 0.2 bar (3.5 bar bypass)Accessories for use in low pressure application only.102Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15/40/80CN SeriesMedium Pressure <strong>Filter</strong>sMax. 600 I/min - 70 barPremiumperformance formedium pressureapplicationsFEATURINGAn economical ‘multipurpose’filter solutionThe CN Series utilizes a castaluminium head and spin-on bowl andcan be specified with Microglass lllor Ecoglass lll filter media. Maximumpressure 70 bar. Maximum flow 600 l/min. Excellent performance value froma globally proven, reliable mediumpressure filter.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• CN utilizes a cast aluminium head and bowl.• Excellent fatigue pressure ratings.• Maximum pressure 70 bar. Maximum flow 600 l/min.• An economic ‘multi-purpose’ filter solution.www.parkerhfde.com103Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15/40/80CN SeriesMedium Pressure <strong>Filter</strong>sFeatures & BenefitsFeatures56 bar fatigue rating(eight times that of a spin-on)Diametral (side) seal between headand bowlDust seal40CN-2 meets automotive HF3 standard15CN meets automotive HF2 standardCast aluminium headReinforced Microglass III replacementelementsComplete performance data disclosureVisual, electrical or electronic indicatorsavailableCoreless Ecoglass III replacementelementsTypical ApplicationsAdvantagesAbility to provide reliable service under tough cyclicoperating conditionsCan be utilised in applications where high pressurefilters may have been only optionProven reliability in cyclic applicationsReduced importance of bowl torquePrevents contamination from building up on bowl/head threadsAutomotive industry acceptanceLow profile, lightweight and durableMulti-layered design produced high capacityand efficiencyWire support reduces pleat bunching, keepsperformance consistentAll pertinent information is provided in an easy-tocompareformatCheck element condition at a glanceRight style for the applicationNo metal content in elementReduced overall weight of 50%Easy compaction of used elementsConversion kits available: new bowl with permanent coreBenefitsReduced downtime due to prematurefilter failuresReduced costs, better “fit” for the applicationNo downtime, no leaksPerforms with “real world” serviceEasier service, eliminates thread gallingSatisfies specifications without need forfurther testing and/or approvalLess weight, smaller envelop and cleanerappearanceGreat performance valueReliable performance throughout element lifeReduces downtime, maximises element lifeNo hidden deficienciesEasy selection of proper filtrationOptimise element life, prevent bypassingMatches your system electrical connectionsEnvironmentally friendly disposal by incinerationLower element replacement costsLower disposal costRetrofit coreless design to housings already installedCompressor lube oilOff-line filter loopsMachine tools (Automotive standard)Hydrostatic drive charge pumpsMobile equipmentPilot lines for servo controlsOil patch drilling equipmentInjection mouldingThe Parker Filtration 15/40/80CN SeriesMedium Pressure <strong>Filter</strong>s.This partial list of applications for Parker “CN” Series <strong>Filter</strong>shas a common factor, the need for an economical, mediumpressure range filter with excellent fatigue pressure ratings.Prior to the availability of the “CN” filter, applications such asthose listed were restricted by limitations of a spin-on can,or forced into the higher-cost range of high pressure filters.The “CN” Series fills this gap and is now available withenvironmentally friendly Ecoglass III elements.104Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Maximum allowable operating pressure:Rated fatigue pressure:70 bar56 barConnections:Several threaded port options available, flange faced ports availableon 80CN.Connection styleModel15CN 40CN 80CNBSPF(G) 1”, 3 /4” 1 1 /4”, 1 1 /2” 1 1 /2”, 2”SAE 12, 16 16, 24 24, 32ISO 6149 M27 M33 M42, M48Metric 3000-M 2”<strong>Filter</strong> housing:Head material aluminium.Bowl material hard anodized aluminium.Seal material:Nitrile or fluoroelastomer.Operating temperature range:Seal material Nitrile: -40°C to +100°C.Seal material Fluoroelastomer: -20°C to +120°C.Bypass valve & indicator settings:Table following gives bypass valve and corresponding indicator setting.BypassIndicator1.7 bar 1.2 bar3.5 bar 2.5 bar<strong>Filter</strong> element:Degree of filtration:Determined by Multipass-test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved(ISO 3724).Microglass III (available by request)Supported with epoxy coated metal wire mesh, end cap materialreinforced composite and metal inner core. Collapse rating 20 bar(ISO 2941).Ecoglass IIISupported with plastic net, end cap material reinforced composite.No metal parts. Collapse rating 10 bar (ISO 2941).<strong>Filter</strong> element can only be used together with bowl including Eco-adaptor.Note: Ecoglass III contributes to ISO 14001 quality.Par-Gel:Water removal media absorbent copolymer laminate media with abilityto remove free water from mineral based and synthetic fluids availablefor 40CN and 80CN.Indicator options:- visual M3. - electrical T1.- electronic F1(PNP). - electronic F2(NPN).For indicator details see catalogue section 6.Weights (kg):Model Length 1 Length 215CN 1.1 1.640CN 2.0 2.580CN 5.6 6.9Fluid compatibility:Suitable for use with mineral and vegetable oils, and some syntheticoils. For other fluids, please consult Parker Filtration.15CNHIN40CNHJN80CNHJNFGLKFGLKGLKFJIIMDMDMDCCCLength 1ALength 2BPLength 1ALength 2BPLength 1ALength 2BPElement removalclearance65mm (2.50”)25.4 (1.00)Nominal HexESAE-4Drain plugElement removalclearance65mm (2.50”)25.4 (1.00)Nominal HexESAE-4Drain plugElement removalclearance65mm (2.50”)25.4 (1.00)Nominal HexESAE-4Drain plugDimensions in mm (inch)Model A B C D E F G H I J K L M* N P15CN40CN80CN156.6(6.17)170.8(6.73)280.9(11.06)250.7(9.87)262.4(10.33)401.6(15.81)46.5(1.83)62.0(2.44)77.7(3.06)25.4(1.09)32.6(1.28)49.5(1.95)71.1(2.80)107.2(4.22)124.8(4.91)85.9(3.38)127.0(5.00)158.7(6.25)73.2(2.88)111.0(4.37)82.6(3.25)82.6(3.25)121.9(4.80)151.4(5.96)38.1(1.50)62.0(2.44)101.6(4.00)22.9(0.90)31.8(1.25)41.1(1.62)42.9(1.69)58.8(2.32)79.4(3.12)36.6(1.44)60.2(2.37)41.3(1.63)5353694xM6-1.0x7.9 deep4xM8-1.25x13 deep4xM8-1.25x16 deep20-27 Nm57-68 Nm80-95 NmNote: add 45mm for T and F indicators105Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15/40/80CN SeriesMedium Pressure <strong>Filter</strong>s80CN Flange Face Details (SAE 2” 3000-M)Flange facemounting holesM12-1.75 x 22 deep21.442.838.977.8Pressure Drop CurvesWith 1.7 bar bypass the recommended initial pressure drop is max 0.5 bar.With 3.5 bar bypass the recommended initial pressure drop is max 1.0 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:The total Δp = housing Δph + (element Δpe x working viscosity/30).15CN-1 ElementsFlow (US GPM)15CN Empty HousingFlow (US GPM)0510 15 20 25250 5 10 15 20 25251.505QE201.520Δp (bar)1.00.50.0002QE10QE20 40 60Flow (l/min)151020QE5080 100Δp (PSID)Δp (bar)1.00.50.003/4” Nominal Port Size20 40 60Flow (l/min)1” Nominal Port Size80151050Δp (PSID)15CN-2 ElementsFlow (US GPM)0510 15 20 25251.502QE20Δp (bar)1.00.505QE10QE20QE15105Δp (PSID)0.0020 40 60Flow (l/min)080 100106Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop Curves40CN-1 ElementsFlow (US GPM)40CN Empty HousingFlow (US GPM)Δp (bar)0 10 20 30 40 50 60 701.502QE05QE1.010QE0.520QE252015105Δp (PSID)Δp (bar)0 20 40 60 801001.525201” Nominal Port Size1.01 1 /4” Nominal Port Size 15100.511/2” Nominal Port Size5Δp (PSID)0.00050 100 150 200 250 300Flow (l/min)40CN-2 ElementsFlow (US GPM)0.0050 100 150 200 250 300 350Flow (l/min)00 10 20 30 40 50 60 70251.502QE20Δp (bar)1.005QE1510Δp (PSID)0.510QE50.0020QE050 100 150 200 250 300Flow (l/min)80CN-1 ElementsFlow (US GPM)80CN Empty HousingFlow (US GPM)0 26 53 79 106 132 159250306090120150159251.502QE05QE201.520Δp (bar)1.010QE0.520QE0.00 100 200 300 400 5000600Flow (l/min)15105Δp (PSID)Δp (bar)1.00.50.0011/2” Nominal Port Size1052” Nominal Port Size0100 200 300 400 500 600Flow (l/min)15Δp (PSID)80CN-2 ElementsFlow (US GPM)0 26 53 79 106 132 159251.520Δp (bar)1.01502QE05QE100.510QE520QE0.00 100 200 300 400 5000600Flow (l/min)Δp (PSID)107Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15/40/80CN SeriesMedium Pressure <strong>Filter</strong>sElement ServiceA. Stop the system’s power unit.B. Relieve any system pressure in the filter line.C. Drain the filter bowl if drain port option is provided.D. Loosen and remove bowl.E. Remove element by pulling downward with a slighttwisting motion and discard.F. Check bowl o-ring and anti-extrusion ring fordamage and replace if necessary.G. Lubricate element o-ring with system fluid and placeon post in filter head.H. Install bowl by rotating counter clockwise and tightento specified torque.15CN – 20-27 Nm (15-20ft. lbs)40CN – 57-68 Nm (42-50ft. lbs)80CN – 80-95 Nm (60-70ft. lbs)I. Confirm there are no leaks after powering the system.32CN <strong>Filter</strong>s Parts ListIndex Description1 Head2 IndicatorsM3-visual auto reset: 1.2 barM3-visual auto reset: 2.5 bar3 T1-electrical: 1.2 bar c/w DIN 43650 connectorT1-electrical: 2.5 bar c/w DIN 43650 connectorF1-electronic PNP with 4 LEDs: 1.2 barF1-electronic PNP with 4 LEDs: 2.5 barF2-electronic NPN with 4 LEDs: 1.2 barF2-electronic NPN with 4 LEDs: 2.5 bar4 Bypass valve1.7 bar assembly3.5 bar assembly5 Element (see replacement element part numbers)6 BowlSingle length with drainSingle length with reusable core and drainSingle length without drainDouble length with drainDouble length with reusable core and drainDouble length without drain7 Bowl and dust sealNitrileFluoroelastomer8 Drain plug: SAE-4NitrileFluoroelastomer415768108Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard products tablePart numbersSupersedesFlow(l/min)ModelnumberElementlengthMediarating (μ)SealsIndicatorBypasssettings3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 barPortsReplacement elements15CN110QEVT1KG16415CN110QEVM3KG16415CN120QEVT1KG16415CN120QEVM3KG16415CN210QEVT1KG16415CN210QEVM3KG16415CN220QEVT1KG16415CN220QEVM3KG16440CN105QEVT1KG24440CN105QEVM3KG24440CN110QEVT1KG24440CN110QEVM3KG24440CN120QEVT1KG24440CN120QEVM3KG24440CN205QEVT1KG24440CN205QEVM3KG24440CN210QEVT1KG24440CN210QEVM3KG24440CN220QEVT1KG24440CN220QEVM3KG24480CN110QEVT1KG32480CN110QEVM3KG32480CN120QEVT1KG32480CN120QEVM3KG32480CN210QEVT1KG32480CN210QEVM3KG32480CN220QEVT1KG32480CN220QEVM3KG324F315CN1R10QETW350C2C219F315CN1R10QEM250C2C219F315CN1R20QETW350C2C219F315CN1R20QEM250C2C219F315CN2R10QETW350C2C219F315CN2R10QEM250C2C219F315CN2R20QETW350C2C219F315CN2R20QEM250C2C219F340CN1R05QETW350E2E219F340CN1R05QEM250E2E219F340CN1R10QETW350E2E219F340CN1R10QEM250E2E219F340CN1R20QETW350E2E219F340CN1R20QEM250E2E219F340CN2R05QETW350E2E219F340CN2R05QEM250E2E219F340CN2R10QETW350E2E219F340CN2R10QEM250E2E219F340CN2R20QETW350E2E219F340CN2R20QEM250E2E219F380CN1R10QETW350F2F219F380CN1R10QEM250F2F219F380CN1R20QETW350F2F219F380CN1R20QEM250F2F219F380CN2R10QETW350F2F219F380CN2R10QEM250F2F219F380CN2R20QETW350F2F219F380CN2R20QEM250F2F21950508080808010010012012018018026026020020028028032032037037042042053053060060015CN15CN15CN15CN15CN15CN15CN15CN40CN40CN40CN40CN40CN40CN40CN40CN40CN40CN40CN40CN80CN80CN80CN80CN80CN80CN80CN80CNLength 1Length 1Length 1Length 1Length 2Length 2Length 2Length 2Length 1Length 1Length 1Length 1Length 1Length 1Length 2Length 2Length 2Length 2Length 2Length 2Length 1Length 1Length 1Length 1Length 2Length 2Length 2Length 21010202010102020551010202055101020201010202010102020FluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerFluoroelastomerElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualG1"G1"G1"G1"G1"G1"G1"G1"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G2"G2"G2"G2"G2"G2"G2"G2"936700Q936700Q936701Q936701Q936704Q936704Q936705Q936705Q936707Q936707Q936708Q936708Q936709Q936709Q936711Q936711Q936601Q936601Q936712Q936712Q936602Q936602Q936715Q936715Q936718Q936718Q936719Q936719QNote: <strong>Filter</strong> assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above.Part NumberS04449S04450S04447S04448S04458S04459CN Series Seal KitsDescriptionNITRILE SEAL KIT 15CNFLUOROEL<strong>AS</strong>TOMER SEAL KIT 15CNNITRILE SEAL KIT 40CNFLUOROEL<strong>AS</strong>TOMER SEAL KIT 40CNNITRILE SEAL KIT 80CNFLUOROEL<strong>AS</strong>TOMER SEAL KIT 80CN109Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15/40/80CN SeriesMedium Pressure <strong>Filter</strong>sOrdering Information (cont.)Product ConfiguratorBox 1 Box 240CN 2Box 310QEBox 4VBox 5M3Box 6KBox 7G24Box 84Box 1CodeModelSmall size MP filter, T-portMedium size MP filter, T-portLarge size MP filter, T-portCode15CN40CN80CNBox 2LengthLength 1Length 2<strong>Filter</strong> typeCode12Highlights Key (Denotes part number availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available within four weeksBox 3Degree of filtrationElement mediaGlass fibreMedia codeEcoglass III element02QE 05QE 10QENote: When using Ecoglass III elements a bowl with reusable Eco-adaptor is required.<strong>Filter</strong> assemblies with Microglass III elements are available by request.WR: Water removal media.Box 5Box 6IndicatorNo indicator portVisual indicatorElectrical indicatorPlugged with steel plugElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.Box 8OptionsOptionsStandard drain port on bowlCode4CodeNM3T1PF1F2F3F4Ecoglass III elements (Fluoroelastomer seals)Model15CN-115CN-240CN-140CN-280CN-180CN-202QE936698Q936702Q936706Q936710Q936713Q936716Q05QE936699Q936703Q936707Q936711Q936714Q936717Q10QE936700Q936704Q936708Q936601Q936602Q936718QBypass valve1.7 bar3.5 bar20QE936701Q936705Q936709Q936712Q936715Q936719Q20QEBypass valveIndicator1.2 bar2.5 barModel15CN40CN80CNWater RemovalWRCodeGKWhen filter includes a bypass valve but not an indicator,code denotes bypass setting.Seal kitsNitrileS04449S04447S04458Box 4Seal typeSeal materialFluoroelastomerNitrileCodeVBBox 7<strong>Filter</strong> connectionPorts15CN:Thread G 3 /4Thread G1Thread SAE 12Thread SAE 16Thread M27, ISO614940CN:Thread G1 1 /4Thread G1 1 /2Thread SAE 16Thread SAE 24Thread M33, ISO614980CN:Thread G1 1 /2Thread G2Thread SAE 24Thread SAE 32Thread M42, ISO6149Thread M48, ISO6149SAE flange 2" 3000-MFluoroelastomer*S04450S04448S04459CodeG12G16S12S16M27G20G24S16S24M33G24G32S24S32M42M48R32Conversion bowl assembly(to retrofit existing CN filter housings to use coreless elements)936758 15CN-1 coreless element bowl assembly936759 15CN-2 coreless element bowl assembly936760 40CN-1 coreless element bowl assembly936761 40CN-2 coreless element bowl assembly936763 80CN-1 coreless element bowl assembly936764 80CN-2 coreless element bowl assemblyReplacement element part numbers for conventional assembliesElements with nitrile sealsElements with Fluoroelastomer sealsModel15CN-115CN-240CN-140CN-280CN-180CN-202Q928935Q928953Q926696Q926697Q932656Q932662Q05QG04041QG04169QG04048QG04167Q932657Q932663Q10Q928934Q928952Q926835Q926837Q932658Q932664Q20Q930367Q930368Q930099Q930118Q929899Q929923QModel15CN-115CN-240CN-140CN-280CN-180CN-202Q932610Q932616Q926716Q926717Q932659Q932665Q05QG04189QG04190QG04191QG04192Q932660Q932666Q10Q932612Q932618Q926836Q926838Q832661Q932667Q20Q930369Q930370Q930100Q930119Q929903Q929927QWR--931412931414931416931418ßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A61020Please note the bolded options reflect standard options with a reduced lead-timeof (4) weeks or less. Consult Parker Filtration on all other lead-time options.99.9%4.571222CodeMetal freeEcoglass III02QE05QE10QE20QENominal flow (l/min) for filter assembly at viscosity 30cStHousing, port size15CN-1, G115CN-2, G140CN-1, G1 1 /240CN-2, G1 1 /280CN-1, G280CN-2, G202QE1030608015018005QE307012020030042010QE508018028037053020QE80100260320420600* Fluoroelastomers are available under various registered trademarks,including Viton (a registered trademark of DuPont) and Fluorel (a registeredtrademark of 3M)110Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
45M/45 Eco SeriesMedium Pressure <strong>Filter</strong>sMax 260 l/min - 40 barIdeal for harshand demandingenvironmentsFEATURINGApproved for engine roomsand minesThe 45M Series utilizes a cast ironhead and steel bowl design and canbe specified with Microglass lll orEcoglass lll filter media. Maximumpressure 40 bar. Maximum flow 260l/min. Lower element replacementcosts and lower disposal costsContact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• 45M utilizes a cast iron head and steel bowl.• Solves the problem of protecting system compoments atlower pressures.• Maximum pressure 40 bar. Maximum flow 260 l/min.• An ideal filter series for harsh environments.www.parkerhfde.com111Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
45M/45 Eco SeriesMedium Pressure <strong>Filter</strong>sFeatures & BenefitsFeaturesCast iron head, steel bowlReinforced Microglass IIIreplacement elementsVisual, electrical or electronicindicators availableTest points in the filter headCoreless Ecoglass III replacementelementsAdvantagesCan be used in applications where aluminium isnot allowedRugged constructionMulti-layered design produced high capacityand efficiencyWire support reduces pleat bunching, keepsperformance consistentCheck element condition at glanceRight style for the applicationPressure measurement and Δp possibleNo metal content in elementReduced overall weight of 50%Easy compaction of used elementsEco adaptors availableBenefitsApproved for engine rooms and minesReliable filtration in all conditionsGreat performance valueReliable performance throughoutelement lifeReduces downtime, maximiseselement lifeOptimise element life, prevent bypassingMatches your system electricalconnectionsQuick testing and maintenanceEnvironmentally friendly disposal byincinerationLower element replacement costsLower disposal costsRetrofit coreless design to housingsalready installedTypical ApplicationsIndustrial power unitsMobile constructionequipmentForestry equipmentThe Parker Filtration 45M/45 Eco SeriesMedium Pressure <strong>Filter</strong>s.The 45M/45 Eco Series of medium pressure filtersoffer an ideal solution to the problem of protectingsystem components at lower pressures.The robust filter housing of the 45M allows theproduct to be applied in harsh environments. <strong>Filter</strong>bowl is designed for rapid element replacement.ECO Series elements reduces the waste over 50%due to the reusable element core.112Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Maximum allowable operating pressure 40 bar.<strong>Filter</strong> housing pressure pulse fatigue tested: 10 6 pulses 0-40 bar.Connections:Threads G1, G1 1 /4 (ISO 228/1) or flange SAE 1 1 /2” 3000-M.<strong>Filter</strong> housing:Head material cast iron (GSI).Bowl material steel.Seal material:Nitrile or Fluoroelastomer.Operating temperature range:Seal material Nitrile: -40° to +100°C.Seal material Fluoroelastomer: -20° to +120°C.Bypass valve:Opening pressure 3.5 bar.<strong>Filter</strong> element:Degree of filtration:Determined by Multipass-test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved(ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap materialreinforced composite and metal inner core.Collapse rating 20 bar (ISO 2941).Ecoglass III:Supported with plastic net, end cap material reinforced composite.No metal parts. Collapse rating 10 bar (ISO 2941).<strong>Filter</strong> element can only be used together with reusable FEA Eco-adapter.Note: Ecoglass III contributes to ISO 14001 quality.Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.Fluid compatibility:Suitable for use with mineral and vegetable oils, and some syntheticoils. For other fluids, please consult Parker Filtration.Installation DetailsPlug M12x1.5TypeA B C Weight (kg) DLength 1116 (4.57)237 (9.33)192 (7.56)5.9Length 2208 (8.20)330 (13.00) 285 (11.22)6.2G1, G1 1 /4, G1 1 /2,DOUTINDLength 3329 (13.00)450 (17.72) 405 (15.94)6.6Flange SAE 1 1 /2” 3000-MLength 4428 (16.85)550 (21.65) 505 (19.90)7.069.8(2.75)4 pcs M12 depth 18only model SAEA35.7 (1.40)38 (1.50)M10 depth 12CBmm(inches)132(5.20)70(2.75)66(2.60)50 min(2.00)39(1.53)11358(2.28)Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
45M/45 Eco SeriesMedium Pressure <strong>Filter</strong>sPressure Drop CurvesThe recommended level of the initial pressure drop is max 1.0 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:The total Δp = housing Δph + (element Δpe x working viscosity/30).45M Series Empty HousingFlow (US GPM)Δp (bar)01.66.3 13 19.3 26 32.3 39 45.3 53 59.3 6623.21.420.31.210.80.60.40.2000 25 50 75 100 125 150 175 200 225 250Flow (l/min)G16G20G24R2417.414.511.68.75.82.9Δp (PSID)45M-1 Element with Microglass III45M-2 Element with Microglass IIIFlow (US GPM)Flow (US GPM)Δp (bar)01.413 26 39 53 66 79 92 106 119 13220.302Q1.205Q 10Q 20Q17.4114.50.80.60.411.68.75.8Δp (PSID)Δp (bar)0 13 26 39 53 66 79 92 106 119 1321.420.31.210.80.60.402Q05Q10Q20Q17.414.511.68.75.8Δp (PSID)0.22.90.22.9000 50 100 150 200 250 300 350 400 450 500Flow (l/min)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)45M-3 Element with Microglass III45M-4 Element with Microglass IIIFlow (US GPM)Flow (US GPM)Δp (bar)0 13 26 39 53 66 79 92 106 119 1321.420.31.210.80.60.402Q05Q20Q10Q17.414.511.68.75.8Δp (PSID)Δp (bar)01.413 26 39 53 66 79 92 106 119 13220.31.202Q17.410.80.60.405Q10Q20Q14.511.68.75.8Δp (PSID)0.22.90.22.9000 50 100 150 200 250 300 350 400 450 500Flow (l/min)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)114Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
45M-1 Element with Ecoglass III45M-2 Element with Ecoglass IIIFlow (US GPM)Flow (US GPM)0 13 26 39 53 66 79 92 106 119 1321.420.305QE1.217.420QE02QE10QE114.50 13 26 39 53 66 79 92 106 119 1321.420.31.2102QE05QE10QE17.414.5Δp (bar)0.80.611.68.7Δp (PSID)Δp (bar)0.80.620QE11.68.7Δp (PSID)0.45.80.45.80.22.90.22.900 50 100 150 200 250 300 350 400 450 500Flow (l/min)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)045M-3 Element with Ecoglass III 45M-4 Elements with Ecoglass IIIFlow (US GPM)Flow (US GPM)Δp (bar)0 13 26 39 53 66 79 92 106 119 1321.420.302QE1.217.410.80.605QE10QE14.511.68.7Δp (PSID)Δp (bar)0 13 26 39 53 66 79 92 106 119 1321.420.31.210.80.602QE05QE10QE17.414.511.68.7Δp (PSID)0.40.220QE5.82.90.40.220QE5.82.9000 50 100 150 200 250 300 350 400 450 500Flow (l/min)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)Ordering InformationStandard products tableProduct numbers45M110QBPKG16145M120QBPKG16145M110QEBPKG16145M120QEBPKG16145M210QBPKG20145M220QBPKG20145M210QEBPKG20145M220QEBPKG20145M310QBPKG24145M320QBPKG24145M310QEBPKG24145M320QEBPKG241SupersedesFF1145.Q010.BS35.GT16FF1145.Q020.BS35.GT16FF1145.QE10.BS35.GT16FF1145.QE20.BS35.GT16FF1146.Q010.BS35.GT20FF1146.Q020.BS35.GT20FF1146.QE10.BS35.GT20FF1146.QE20.BS35.GT20FF1147.Q010.BS35.GT24FF1147.Q020.BS35.GT24FF1147.QE10.BS35.GT24FF1147.QE20.BS35.GT24Flow(l/min)140160140160200220200220230250230250Modelnumber45M45M45M45M45M45M45M45M45M45M45M45MElementlengthLength 1Length 1Length 1Length 1Length 2Length 2Length 2Length 2Length 3Length 3Length 3Length 3Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.102010201020102010201020Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrilePluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedBypasssettings3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 barPortsG1"G1"G1"G1"G1 1 /4"G1 1 /4"G1 1 /4"G1 1 /4"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"Replacementelements938962Q938963Q938978Q938979Q938966Q938967Q938982Q938983Q938970Q938971Q938986Q938987QSupersedesFC7005.Q010.BKFC7005.Q020.BKFC7005.QE10.BKFC7005.QE20.BKFC7006.Q010.BKFC7006.Q020.BKFC7006.QE10.BKFC7006.QE20.BKFC7007.Q010.BKFC7007.Q020.BKFC7007.QE10.BKFC7007.QE20.BK45M Series Seal KitsPart Number Description918045049 NITRILE SEAL KIT 45M918045050 NITRILE SEAL KIT 45M Eco918045054 FLUOROEL<strong>AS</strong>TOMER SEAL KIT 45M918045055 FLUOROEL<strong>AS</strong>TOMER SEAL KIT 45M Eco115Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
45M/45 Eco SeriesMedium Pressure <strong>Filter</strong>sOrdering Information (cont.)Product configuratorBox 1 Box 245M2Box 310QBox 4BBox 5M3Box 6KBox 7G20Box 81Box 1CodeModelMedium pressure filter, T-portBox 2LengthLength 1Length 2Length 3Length 4<strong>Filter</strong> typeCode1234Box 3Code45MElement mediaMicroglass III elementEcoglass III element123123123123Degree of filtrationGlass fibreMedia code02Q02QEHighlights Key (Denotes part number availability)Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available within four weeks05Q05QE10Q10QENote: When using Ecoglass III elements a bowl with reusable Eco-adaptor is required.20Q20QEBox 4Seal typeSeal materialNitrileFluoroelastomerCodeBVBox 5Plugged with steel plugVisual indicatorElectrical indicatorElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.IndicatorCodePM3T1F1F2F3F4Box 6Bypass valve3.5 barNo bypassNo bypassBypass valveIndicator2.5 bar7.0 barNo indicator (P)CodeKNXWhen filter includes a bypass valve but not an indicator,code denotes bypass setting.+ Box 8: code 2+ Box 8: code 2Box 7ConnectionsThread G 1Thread G 1 1 /4Thread G 1 1 /2SAE flange 1 1 /2" 3000-MCodeG16G20G24R24Availability: S = standard optionx = non-standard, ask for availability<strong>Filter</strong> connectionLength 1SSxxLength 2SSSxLength 3SSSxLength 4xSSxBox 8OptionsStandardNo bypassOptionsCode12Media02Q05Q10Q20Q02QE05QE10QE20QEReplacement elements with nitrile sealsLength 1938960Q938961Q938962Q938963Q938976Q938977Q938978Q938979QLength 2938964Q938965Q938966Q938967Q938980Q938981Q938982Q938983QLength 3938968Q938969Q938970Q938971Q938984Q938985Q938986Q938987QLength 4938972Q938973Q938974Q938975Q938988Q938989Q938990Q938991QNominal flow (I/min) at viscosity 30 cSt - connection size<strong>Filter</strong> lengthLength 1Length 2Length 3Length 4Media02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QEG1680120140160130150170190150170190200170180190200G2080120150180150170200220170190210230190210220230G24 & R2480120150200170190230250190210230250210230240260ßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222DisposableMicroglass III02Q05Q10Q20QCodeMetal freeEcoglass III02QE05QE10QE20QE116Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15P/30P SeriesHigh Pressure <strong>Filter</strong>sMax 200 l/min - 207 barWhen it comes tolightweight filtersolutionsCompact aluminium housingand lightweight designThe 15P/30P Series utilizes acompact aluminium housing with 2head sizes and 2 bowl lengths, largeports and wide flow paths. Maximumpressure 207 bar. Maximum flow 200l/min. Efficient filtration and maximizedelement life.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• 15P/30P utilizes a compact aluminium housing with 2 headsizes and 2 bowl lengths.• Microglass III filter media.• Maximum pressure 207 bar. Maximum flow 200 l/min.• A quality filter for better control and long component life.www.parkerhfde.com117Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15P/30P SeriesHigh Pressure <strong>Filter</strong>sFeatures & BenefitsFeaturesCompact aluminium housingTwo head sizes and two bowllengthsLarge ports and wide flow pathsMicroglass III replacement elementsVisual, electrical and electronicindicators availableAdvantagesLight weight but still robust designOptimised sizingLow differential pressure across housingand elementMulti-layered design produced high capacityand efficiencyWire support reduces pleat bunching, keepsperformance consistentCheck element condition at a glanceRight style for the applicationBenefitsReliable and continuous operation bothin mobile and industrial applicationsEfficient filtrationRight filter for each applicationHigher flow rates possibleLess lost energyGreat performance valueReliable performance throughoutelement lifeReduces downtime, maximiseselement lifeOptimise element life, prevent bypassingMatches your system electricalconnectionsTypical ApplicationsSaw millsAircraft ground support equipmentAsphalt pavers<strong>Hydraulic</strong> fan drivesPower steering circuitsDomestic refuse vehiclesCement trucksServo control protectionLogging equipmentThe Parker Filtration 15P/30P SeriesHigh Pressure <strong>Filter</strong>s.These application examples have one thing incommon...the need for clean hydraulic fluid.Modern high pressure hydraulic systems aredemanding. Better controls and long componentlife are expected. To deliver the high standards ofperformance, hydraulic components are built withtighter tolerances which increases their sensitivityto contamination.That’s where Parker pressure filters come intoplay. They filter out ingressed contamination beforeit jams a valve or scores a cylinder. They blockpump generated debris before it gets to servoor proportional valves. Parker pressure filtersare a key ingredient in meeting today’s systemdemands.Put your hydraulic systems in the care of ParkerFiltration. We are committed to designing andbuilding the best filters available to industry.118Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Maximum allowable operating pressure 207 bar.<strong>Filter</strong> housing pressure pulse fatigue tested: 138 bar.Connections:Inlet and outlet connections are threaded.Connection style Model15P 30PBSPF(G) 3 /4” 1”ISO 6149 M27 M33<strong>Filter</strong> housing:Head material extruded aluminium (anodised 6061-T6).Bowl material impacted aluminium (anodised 6061-T6).Seal material:Nitrile or Fluoroelastomer.Operating temperature range:Seal material Nitrile: -40°C to +100°C.Seal material Fluoroelastomer: -20°C to +120°C.Bypass valve:Opening pressure 3.5 bar.<strong>Filter</strong> element:Degree of filtration:Determined by multipass-test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved(ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap materialreinforced composite and metal inner core. Collapse rating 24 bar(ISO 2941).High collapse elements:High collapse elements available. For details please contactParker Filtration.Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.Weights (kg):Model Length 1 Length 215P 1.6 2.130P 2.9 3.9Fluid compatibility:Suitable for use with mineral and vegetable oils, and somesynthetic oils. For other fluids, please consult Parker Filtration.Installation Details15P Series23.0.91101.64.00Torque 74-95 Nm(55-70 Ft lbs)46.01.8121.8.8650.51.9979.4–.133.125–.0056.22.2579.431.3 Dia.6.8–.13.266–.00549.01.9325.41.000250.49.8615P-2268.7–.2.310.58–.0915P-262.52.46Torque 40-48 Nm50.82.00Minimumcartridge removalclearance155.36.1115P-1173.5-2.36.83-0.915P-1Optional 5/16 SAE-5drain porttorque 20-27 Nm(15-20 ft lbs)Bottom View64.32.5323.9.94119Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15P/30P SeriesHigh Pressure <strong>Filter</strong>sInstallation Details (cont.)30P SeriesTorque 74-95 Nm (55-70 Ft lbs)90.13.5566.72.633.0.12mm(inches)51.42.0224.4.96Side view210.0 229.68.27 9.0430P-1 30P-175.22.96Torque 88-95 Nm(65-70 Ft lbs)338.813.3430P-2319.312.5730P-2101.64.00Minimumcartridgeremovalclearance104.84.13 diaBottom viewOptional str thd drain port5/16 SAE-5 (1 1 /2-20 UNF-2B)Torque 20-27 Nm (15-20 Ft lbs)92.13.63 dia69.92.75034.91.375 10.3dia thru 2 total.40652.32.0628.81.12 Hex101.64.000Port to port19.1.75Optional mounting bracket (925563)31.81.2511711013456Index Description 15P 30P1 Head2 Bypass assembly3 Element See chart in product configurator4 Bowl O-ring – Nitrile OR04074 OR06037Bowl O-ring – fluoroelastomer V92138 V921515 Bowl6 Drain plug – c/w buna sealDrain plug – c/wFluoroelastomer seal7 Nameplate10 Blank indicator kit11 IndicatorsM3 – Visual auto reset indicator FMUM3KVAU14MT1 – Electrical indicatorFMUT1KVAU14MF1 – Electronic indicatorPNP with 4 LEDFMUF1KVAU14MF2 – Electronic indicatorNPN with 4 LEDFMUF2KVAU14M23456120Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop CurvesThe recommended level of the initial pressure drop is max. 1.2 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp30 x viscosity of medium used) / 30 cSt.15P Empty HousingFlow (US GPM)0 5 10 15 20 25 2530P Empty HousingFlow (US GPM)0 10 20 30 40 50 60 251.5201.520Δp (bar)1.00.515P-115P-215105Δp (PSID)Δp (bar)1.00.530P-130P-215105Δp (PSID)0.00 20 40 60 80Flow (l/min)00.00 50 100 150 200Flow (l/min)015P-1 Elements30P-1 ElementsFlow (US GPM)Flow (US GPM)0510 15 20 25250 13 26 39 53 66 7925Δp (bar)1.51.00.502Q10Q05Q20Q2015105Δp (PSID)Δp (bar)1.51.00.502Q05Q10Q20Q2015105Δp (PSID)0.0020 40 60Flow (l/min)080 1000.00050 100 150 200 250 300Flow (l/min)15P-2 Elements30P-2 ElementsFlow (US GPM)Flow (US GPM)0510 15 20 25250 13 26 39 53 66 79251.502Q201.502Q20Δp (bar)1.00.505Q10Q20Q15105Δp (PSID)Δp (bar)1.00.505Q20Q10Q15105Δp (PSID)0.0020 40 60Flow (l/min)080 1000.00050 100 150 200 250 300Flow (l/min)121Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
15P/30P SeriesHigh Pressure <strong>Filter</strong>sOrdering InformationStandard products tablePart number15P110QBM3KG12115P110QBT1KG12115P210QBM3KG12115P210QBT1KG12130P110QBM3KG16130P110QBT1KG16130P210QBM3KG16130P210QBT1KG161Supersedes15P-1-10Q-M2-50-B2B2-115P-1-10Q-TW3-50-B2B2-115P-2-10Q-M2-50-B2B2-115P-2-10Q-TW3-50-B2B2-130P-1-10Q-M2-50-C2C2-130P-1-10Q-TW3-50-C2C2-130P-2-10Q-M2-50-C2C2-130P-2-10Q-TW3-50-C2C2-1Flow(l/min)45457070120120170170Modelnumber15P15P15P15P30P30P30P30PElementlengthLength 1Length 1Length 2Length 2Length 1Length 1Length 2Length 2Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.1010101010101010Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileVisualElectricalVisualElectricalVisualElectricalVisualElectricalBypasssettings3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 barPortsG 3 /4"G 3 /4"G 3 /4"G 3 /4"G1"G1"G1"G1"Replacementelements939102Q939102Q939106Q939106Q939110Q939110Q939114Q939114QProduct configuratorBox 1 Box 215P1Box 310QBox 4BBox 5M3Box 6KBox 7G12Box 81Box 1CodeModelHigh pressure filter, T-portHigh pressure filter, T-portBox 2LengthLength 1Length 2<strong>Filter</strong> typeCode12Box 3Code15P30PElement mediaMicroglass III element123123123123Degree of filtrationGlass fibreMedia code02Q05Q10QHighlights Key (Denotes part number availability)Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available within four weeks20QBox 4Seal typeSeal materialNitrileFluoroelastomerCodeBVBox 5Plugged with steel plugVisual indicatorElectrical indicatorNo indicator portElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.IndicatorCodePM3T1NF1F2F3F4Box 6Bypass and indicator settingsBypass valve3.5 barIndicator2.5 barCodeKWhen filter includes a bypass valve but not an indicator,code denotes bypass setting.Box 7<strong>Filter</strong> connectionConnections15P: Thread G 3 /4Thread M27, ISO 614930P: Thread G 1Thread M33, ISO 6149CodeG12M27G16M33Box 8OptionsOptionsStandardDrain port on bowlCode14Media02Q05Q10Q20QReplacement elements with nitrile seals15P-1939100Q939101Q939102Q939103Q15P-2939104Q939105Q939106Q939107Q30P-1939108Q939109Q939110Q939111Q30P-2939112Q939113Q939114Q939115Q<strong>Filter</strong> model15P-115P-230P-130P-2Nominal flow (I/min) at viscosity 30 cSt02Q25407012005Q30609015010Q457012017020Q7090170200ßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222CodeDisposableMicroglass III02Q05Q10Q20Q122Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
100P SeriesHigh Pressure <strong>Filter</strong>sMax 1000 l/min - 414 barWhen it comes tohigh flow capacityfor high pressuresystemsA high flow rate filtersolutionThe 100P Series design means onelement change only the bowl endcaphas to be removed. Microglasslll glassfibre media is standard.Maximum pressure 414 bar. Maximumflow 1000 l/min. An ideal solutionwhere space is at a premium.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• 100P design, only the bowl end-cap is removed on elementchange.• Microglass III glassfibre media is standard.• Maximum pressure 414 bar. Maximum flow 1000 l/min.• An ideal solution where space is at a premium.www.parkerhfde.com123Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
100P SeriesHigh Pressure <strong>Filter</strong>sFeatures & BenefitsFeaturesHigh 414 bar pressure ratingFlow rates up to 1000 l/minOptional reverse flow valveBottom access bowlMicroglass III replacement elementsVisual and electrical indicatorsavailableAdvantagesStrong and robust housing for heavy dutyapplicationsPressure filtration possible for high flow ratesAllows reverse flow and prevents back washof elementOnly bottom of the bowl must be opened forelement changeMulti-layered design produced high capacityand efficiencyWire support reduces pleat bunching, keepsperformance consistentCheck element condition at a glanceRight style for the applicationBenefitsReliable and continuous operation foropen and closed loop applicationsExcellent protection of highperformance machineryIdeal for applications where back flowis expectedEasy serviceGreat performance valueReliable performance throughoutelement lifeReduces downtime, maximiseselement lifeOptimises element life, preventsbypassingMatches your system electricalconnectionsTypical ApplicationsDrilling rigsPower packsOil/gas industryFlight simulatorsTest rigsThe Parker Filtration Model 100PHigh Pressure <strong>Filter</strong>s.The 100P Series is designed to meet the growingdemand for high-pressure filters with a flow rate capacityof up to 1000 l/min at 414 bar working pressure.For systems where reverse flow can be expected, anoptional integrated reverse flow valve avoids back washof contamination. When changing the element, onlythe end cap of the bowl has to be removed. The filteris ideal for applications where space is at a premium.The filter media used in the elements is high qualityMicroglass III glass fibre.124Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Maximum allowable operating pressure 414 bar.<strong>Filter</strong> housing pressure pulse fatigue tested: 3*10 6 pulses 0 - 276 bar.Connections:Inlet and outlet connections are threaded internally or flange faced.Threads G1 1 /2", G2" (ISO 228/1), SAE 24, SAE 32.or flanges 1 1 /2" SAE 6000, 2" SAE 6000, 1 1 /2" SAE 6000-M,2" SAE 6000-M.*6000-M is a SAE style with appropriate metric fixing threads.<strong>Filter</strong> housing:Head material cast iron (GSI).Bowl material extruded steel, max torque 200 Nm.Seal material:Nitrile or Fluoroelastomer.Operating temperature range:Seal material Nitrile: - 40°C to +100°C.Seal material Fluoroelastomer: - 20°C to +120°C.Bypass valve:Opening pressure 7.0 bar.Options:Reverse flow valve, which directs back flow from port to port.<strong>Filter</strong> element:Degree of filtration:Determined by Multipass-test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue lifeis achieved (ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end capmaterial reinforced composite and metal inner core.Collapse rating 20 bar (ISO 2941).Indicator options:Indicating differential pressure: 5.0 bar.- visual indicator.- electrical indicator.Weights (kg):100P-1: 37 kg.100P-2: 47 kg.Fluid compatibility:Suitable for use with mineral and vegetable oils, and somesynthetic oils. For other fluids, please consult Parker Filtration.Installation Details107.5 105 88 3555A/F100781013961Mounting Clamp Item 16Steel (Zinc plated)EPDM188100138Ø1252.533M12x75(2x)(81.21.022.20)8307023513SAE 6Ø169Ø125Ø145Ø14546 A/F15Minimum elementclearanceL1=563L2=813330/5801114123/3A43/3A2515Type H model 10001 <strong>Filter</strong> head2 <strong>Filter</strong> element3 Bowl seal3A Bowl back-up ring4 Housing5 Cover6 Indicator seal7 Bypass set8 Visual indicator9 Electrical indicator10 Bypass seal11 Reverse flow set12 Adaptor13 Adaptor/reverse flow seal14 Cover seal15 Drain plug16 Mounting clampNote: For installation drawings of the SAE 1½” and 2” flanges, contact Parker.125Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
100P SeriesHigh Pressure <strong>Filter</strong>sAdditional Information<strong>Filter</strong> withReverse Flow ValveNormal Flow ConditionValve housingValve housingSleeveCentral stemCircuit symbolReverse Flow ConditionPressure Drop CurvesThe recommended level of the initial pressure drop is max. 2.3 bar.If the medium used has a viscosity different from 30 cSt, pressure drop can be estimated as follows:The total Δp = housing Δph + (element Δpe x working viscosity/30).100P-1 Empty Housing (G1 1 /2”, SAE 24, SAE 1 1 /2”)Flow (US GPM)100P-2 Empty Housing (G2”, SAE 32, SAE 2”)Flow (US GPM)Δp (bar)0226 53 79 106 132 159 185 211291.826.11.623.2RFV1.420.31.217.41Normal14.5housing0.811.60.68.70.45.80.22.9000 100 200 300 400 500 600 700 800Flow (l/min)Δp (PSID)Δp (bar)0226 531.81.61.41.210.80.60.40.279 106132 159 185 211 238 26429RFVNormalhousing00 100 200 300 400 500 600 700 800 900 1000Flow (l/min)26.123.220.317.414.511.68.75.82.90Δp (PSID)100P-1 ElementsFlow (US GPM)100P-2 ElementsFlow (US GPM)Δp (bar)0226 53 79 106 132 159 185 211291.826.11.623.202Q1.420.31.217.405Q114.510Q0.811.60.68.70.45.820Q0.22.9000 100 200 300 400 500 600 700 800Flow (l/min)Δp (PSID)Δp (bar)0226 53 79 106 132 159 185 211 238 264291.826.102Q1.623.21.420.305Q1.217.4114.510Q0.811.60.68.720Q0.45.80.22.9000 100 200 300 400 500 600 700 800 900 1000Flow (l/min)Δp (PSID)126Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard products tablePart number100P105QBM4MF241100P110QBM4MF241100P120QBM4MF241100P205QBM4MF321100P210QBM4MF321100P220QBM4MF321Supersedes1074A.2HN70.FZ12101074A.2HN70.FZ12201074A.2HN70.FZ12301074A.2HN70.TZ22101074A.2HN70.TZ22201074A.2HN70.TZ2230Flow(l/min)6007008008409201000Modelnumber100P100P100P100P100P100PElementlengthLength 1Length 1Length 1Length 2Length 2Length 2Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.5102051020Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileVisualVisualVisualVisualVisualVisualBypasssettings7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 barPortsSAE flange 1 1 /2" 6000SAE flange 1 1 /2" 6000SAE flange 1 1 /2" 6000SAE flange 2" 6000SAE flange 2" 6000SAE flange 2" 6000Replacementelements939061Q939062Q939063Q939065Q939066Q939067QSupersedes1070Z121A1070Z122A1070Z123A1070Z221A1070Z222A1070Z223AProduct configuratorBox 1 Box 2100P 2Box 310QBox 4BBox 5M4Box 6MBox 7F32Box 81Box 1ModelLarge HP filter, L-portCodeCode100PBox 2LengthLength 1Length 2<strong>Filter</strong> typeCode12Box 3Element mediaMicroglass III elementDegree of filtrationGlass fibreMedia code02Q05Q10Q20QBox 4Seal typeSeal materialNitrileFluoroelastomerCodeBVBox 5IndicatorIndicator port pluggedVisual indicatorElectrical indicatorElectrical indicator with red lamp 28 Vdc, N.O.Electrical indicator with red lamp 110 VAC, N.O.Electrical indicator with red lamp 250 VAC, N.O.CodePM4T2T3T4T5Box 6Bypass and indicator settingsBypass valve7.0 barIndicator5.0 barCodeMWhen filter includes a bypass valve but not an indicator,code denotes bypass setting.Box 7<strong>Filter</strong> connectionConnectionsCodeThread G 1 1 /2G24Thread G 2G32Thread SAE 24S24Thread SAE 32S32SAE flange 1 1 /2" 6000F24SAE flange 1 1 /2" 6000-M on requestSAE flange 2" 6000F32SAE flange 2" 6000-Mon requestSeal Kit and Mounting ClampOptionsSeal kit (nitrile)Seal kit (fluoroelastomer)Mounting Clamp123123123123Code8069000070806900001384.47.265.01Item is standardItem is standard green optionItem is semi standardItem is non standardBox 8OptionsOptionsStandardReverse flow valvePart Number8060050033806007000280600700078060070006Highlights Key (Denotes part number availability)Note: Standard items are in stock, semi standard items are availablewithin four weeksIndicator Optionsßx(c)=250.0%N/AN/AN/A6Code13OptionM4T2T3T5Note: Refer to Box 5 for options explanation.Replacement elements with nitrile sealsMedia02Q05Q10Q20Q<strong>Filter</strong> port size100P-1, 1 1 /2"100P-2, 2"Length 1939060Q939061Q939062Q939063QLength 2939064Q939065Q939066Q939067QNominal flow (I/min) at viscosity 30 cSt02Q54070005Q60084010Q700920Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.57122220Q8001000CodeDisposableMicroglass III02Q05Q10Q20QNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.127Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
128Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
EPF iprotect ® SeriesHigh Pressure <strong>Filter</strong>sMax. 700 l/min - 450 barAn ecological filterdesign solutionWhen Ecology meetsEconomyThe EPF Series utilizes the uniquepatented iprotect ® element design.The ecological design reducesenvironmental impact by over 50%typically and covers flow rates upto 700 l/min at 450 bar. The ‘smart’element in the bowl design ensuresthat minimum space is needed toservice the filter. The patented designprotects the quality of filtration andthe aftermarket, offering improvedaftermarket revenues.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• A new generation of high pressure filters.• Rated at 450 bar for flows up to 700 l/min.• The quality of filtration is protected.• The element remains in the filter bowl for a more compactsolution.www.parkerhfde.com129Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
EPF iprotect ® SeriesHigh Pressure <strong>Filter</strong>sSpecificationPressure Rating: 414 barFlow Capacity:• Size 1: 40 l/min• Size 2: 100 l/min• Size 3: 160 l/min• Size 4: 320 l/min• Size 5: up to 700 l/min<strong>Filter</strong> housing:• In-line with threaded andflanged ports• Manifold type filter heads<strong>Filter</strong> Element:Patented filter elementtechnology based on ecologicaldesign.Bypass settings:• 3.5, 5and 7bar and blockedBenefitsApplicationsIndicators:Visual, electrical andelectronical• ATEX certified filters• Service-friendly design(minimizes space neededfor servicing filter, elementremains in filter bowl)• Automatic elementpositioning prevents misakesduring filter service events• New iprotect ® filterfilter element includesreplacement bypass valveseals• Ecological design minimizeswaste over 50%Modular product architecture allows easy and compactintegration of the iprotect ® element in systems andmanifold blocks.New product design reduces energy consumption acrossfilter due to optimized flow path.Patented filter technology protects system performanceand optimal protection of components.Patented filter technology protects filter element aftermarket and usage of genuine OEM parts.Element Options:EPF iprotect inline filter5standard sizes with multiplebowl lengths for optimal filterperformanceEPF iprotect ® manifold filter4standard sizes with ability toprovide custom specific interfacefor flangeREDUCING COSTS BY INNOVATIONIntroducing the NEW EPF ‘Ecological HighPressure <strong>Filter</strong>’ designed to support ParkerFiltration’s drive towards reducing costs byinnovation.<strong>Hydraulic</strong> filter solutions for the future require aradically different approach and Parker Filtration’sobjective underlines an ability to support ourcustomers with the design and realization of ‘newgeneration’ filters such as the EPF.Parker Filtration offers hydraulic system designersthe possibility to integrate various system functionsinto single components. This can result in costreductions for the application in manufacturingand end-user maintenance and can realize morecompact solutions and lower environmental impactby reducing leak points for example. Integratinghigh pressure filters such as the EPF withunique, quality media and patented elements willguarantee filter performance and maximize systemcomponent protection.At 450 bar maximum working pressure and flowoptions up to 700 l/min, the EPF Series offersanew ecological style filter element namediprotect ® ,typically reducing disposal waste andcost by over 50%. Designed with high quality filtermedia, the EPF range will provide benefits for OEMand End Users alike maximizing the productivityand Profitability from their equipment.• <strong>Hydraulic</strong> system protection – EPF iprotect ®Series help safeguard system fluid cleanlinessby using patented elements in the assembly.• System performance – EPF iprotect ®guaranteed filter quality improves systemcontrollability, productivity and reliability.• Saving time saves cost – EPF iprotect ® uniqueelement design reduces time to change andeliminates oil spillage during change-over asthe element remains in the bowl when it’sremoved from the filter head.• Space saving installation – bowl removalrequires no tools, is fast and best of all requiresthe minimum of space keeping the filterenvelope to aminimum130Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
EADPF iprotect ® SeriesHigh Pressure Duplex <strong>Filter</strong>sMax. 320 l/min - 350 barAutomatic duplexfilters increasesafetyNew patented duplex filtertechnology offers continuousautomated protectionThe EADPF Series utilizes a uniquepatented element design namediprotect ® . The ecological designreduces environmental impact over50% typically and covers flow ratesup to 320 l/min at 350 bar. This‘smart’ element is integrated into aduplex head featuring a fully automaticchange over. One or two differentialpressure indicators are used to controlthe duplex filter. A unique aspectis that the system pressure is usedfor the pilot lines operating the flowcontrol valves, isolating or putting thefilter bowl with the clean element intoservice.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• The quality of filtration is protected.• Rated at 350 bar for flows up to 320 l/min.• Multiple bypass settings up to 7 bar or blocked with 210 barrated high collapse element.• EADPF duplex filters feature fully automatic element changeover.www.parkerhfde.com131Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
EMDPF iprotect ® SeriesHigh Pressure Duplex <strong>Filter</strong>sMax. 320 l/min - 350 barManually operatedduplex filterswith the iprotect ®element familyNew patented iprotect ®element family providessystem-matched duplex filtersolutionsThe EMDPF Series utilizes the uniquepatented iprotect ® element design.The ecological design reducesenvironmental impact by over 50%typically and covers flow rates up to320 l/min at 350 bar. This ‘smart’element is integrated into a manuallyoperated duplex head. One or twodifferential pressure indicators areused to control the duplex filter. Aunique aspect is that the systempressure is used for the pilot linesoperating the flow control valves,isolating or putting the filter bowl withthe clean element into service.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• The quality of filtration is protected.• Rated at 350 bar for flows up to 320 l/min.• Multiple bypass settings up to 7 bar or blocked with 210 barrated high collapse element.• EMDPF duplex filters feature leakage-free valve technology.www.parkerhfde.com132Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
18/28/38P SeriesHigh Pressure <strong>Filter</strong>sMax 700 l/min - 414 barThe all-round highpressure filtersolutionRobust housing for heavyduty applicationsThe 18/28/38P Series features arange of head and bowl sizes andconnection options. Microglasslll glassfibre media is standard.Maximum pressure 414 bar. Maximumflow 700 l/min. A globally proven filterwith optimized sizing for a wide rangeof industrial applications.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Multiple bypass settings up to 7 bar.• 18/28/38P features a range of head and bowl sizes andconnection options.• Microglass III glassfibre media is standard.• Maximum pressure 414 bar. Maximum flow 700 l/min.• A proven filter solution for ‘heavy duty’ hydraulic systems.www.parkerhfde.com133Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
18/28/38P SeriesHigh Pressure <strong>Filter</strong>sFeatures & BenefitsFeaturesFatigue tested to full pressure ratingSeveral head sizesSeveral connection optionsMicroglass III replacement elementsVisual, electrical and electronicindicators availableAdvantagesStrong and robust housing for heavy dutyapplicationsOptimised sizingEasy mountingMulti-layered design produced high capacity andefficiencyWire support reduces pleat bunching, keepsperformance consistentCheck element condition at a glanceRight style for the applicationBenefitsReliable and continuous operation bothin mobile and industrial applicationsEfficient filtrationCovers wide flow rangeGlobal design, global acceptanceRight filter for each applicationGreat performance valueReliable performance throughoutelement lifeReduces downtime, maximiseselement lifeOptimises element life, preventsbypassingMatches your system electricalconnectionsTypical ApplicationsInjection mouldingDie castingServo controlsMachine toolsMobile equipmentThe Parker Filtration 18/28/38P SeriesHigh Pressure <strong>Filter</strong>sParker Filtration engineered the 18/28/38P series of high pressure filtersto satisfy demanding applications in the mobile and industrial marketsthroughout the world. With metric mounting and optional ISO 6149ports, this new series is truly a global design.Installed downstream of the pump, this new series with their wide rangeof high capacity Microglass III elements, offer excellent protection tosystem components.Standard filters come complete with industry proven spool type bypassvalve. For more critical applications such as servo or proportionalcontrols, a no bypass high strength element combination ensuresmaximum protection.The modular low hysteresis differential pressure indicator fitted to thisseries is unrivaled in its performance. Tests prove its accuracy andfoolproof design to be a major advance in indicator technology.134Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Maximum allowable operating pressure 414 bar.<strong>Filter</strong> housing pressure pulse fatigue tested: 10 6 pulses 0 - 414 bar.Connections:Inlet and outlet connections are threaded internally or flange faced.Connection styleModel18P 28P 38PBSPF(G) 3 /4” 1” 1 1 /4”, 1 1 /2”SAE 12 16 20, 24ISO 6149 M27 M33 M42, M48Flange SAE 6000 3 /4” 1” 1 1 /4”Flange SAE 6000-M* 3/4” 1” 1 1 /4”*6000-M is a SAE style with appropriate metric fixing threads.<strong>Filter</strong> housing:Head material cast iron (GSI).Bowl material steel.Seal material:Nitrile or Fluoroelastomer.Operating temperature range:Seal material Nitrile: -40°C to +100°C.Seal material Fluoroelastomer: -20°C to +120°C.Bypass valve & indicator settings:Table below gives bypass valve and corresponding indicator setting.BypassIndicator3.5 bar 2.5 bar7.0 bar 5.0 bar<strong>Filter</strong> element:Degree of filtration:Determined by multipass-test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved (ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap material reinforcedcomposite and metal inner core. Collapse rating 20 bar (ISO 2941).High collapse elements:(To be used when no bypass function in filter housing).Microglass III media supported with epoxy coated metal wire mesh onupstream and stainless steel on downstream, end cap material steel.Strong metal inner core. Collapse rating 210 bar (ISO 2941).Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar or 5.0 ± 0.5 bar.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.Weights (kg):Model Length 1 Length 218P 4.2 5.728P 6.7 9.238P 15.8 20.3Fluid compatibility:Suitable for use with mineral and vegetable oils, and some synthetic oils.For other fluids, please consult Parker Filtration.Model18P-118P-228P-128P-238P-138P-2A B C D E F G H J K L M N P(A/F)198(7.79)293(11.53)228(8.97)337(13.26)329(12.95)448(17.64)32(1.26)40(1.57)44(1.73)26(1.02)29(1.14)35(1.38)75(2.95)93(3.66)128(5.04)24(0.94)24(0.94)36(1.42)100(3.94)98(3.86)120(4.72)160(6.30)40(1.57)55(2.16)50(1.97)20(0.79)27.5(1.07)25(0.98)80(3.15)90(3.54)120(4.72)40(1.57)45(1.77)60(2.36)55(2.16)62(2.44)81(3.19)110(4.33)124(4.88)162(6.38)M8 x 1.25x12deepM10 x 1.5x11deepM10 x 1.5x12deep18P 28P 38PBCBCBCA Length 1A Length 2Bowl removalFDGHJTorque22-27Nm(15-20 ft/lbs)Hex. EA Length 1A Length 2Bowl removalFGHJDTorque35-40 Nm(25-30 ft/lbs)Hex. EA Length 1A Length 2Bowl removalFGHJDTorque80-95 Nm(60-70 ft/lbs)Hex. Emm(inches)KLR3015°MNKLR35M15°NKLR4815°MN4 mounting holes (P)4 mounting holes (P)4 mounting holes (P)135Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
18/28/38P SeriesHigh Pressure <strong>Filter</strong>sFlange Face DetailsØGThreadE metricF SAEABCDModelmm (inches)18P ( 3 /4”)28P (1”)38P (1 1 /4”)A B C D E F G11.9 23.8 25.4 50.819.0M10 x 1.5-6H x 18 Deep3 /8-16 UNC-2B x 18 deep(0.47) (0.94) (1.00) (2.0)(0.75)14 27.8 28.0 57.125.4M12 x 1.75-6H x 20 Deep7 /16-14 UNC-2B x 20 deep(0.55) (1.09) (1.10) (2.25)(1.0)15.7 31.7 33.0 66.731.8M14 x 2-6H x 20 Deep 1 /2-13 UNC-2B x 20 deep(0.62) (1.25) (1.30) (2.62)(1.25)136Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop CurvesWith 3.5 bar bypass the recommended initial pressure drop is max 1.2 bar.With 7.0 bar bypass the recommended initial pressure drop is max 2.3 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:The total Δp = housing Δph + (element Δpe x working viscosity/30).18P-1 Elements18P-2 ElementsFlow (US GPM)Flow (US GPM)Δp (bar)0 5 11 16 21 26 32 37 423.53.02.52.01.51.00.50.0018P-1 Empty Housing and High CollapseFlow (US GPM)43.502Q29.005Q10Q14.520Q20 40 60 80 100 120 140Flow (l/min)0160Δp (PSID)Δp (bar)0 5 11 16 213.53.02.52.01.51.00.50.0020 40 60 80 100 120 140Flow (l/min)18P-2 High Collapse ElementsFlow (US GPM)26 32 37 4202Q05Q10Q20Q43.529.014.50160Δp (PSID)0 5 11 16 213.526 32 37 420 5 11 16 213.526 32 37 42Δp (bar)3.02.52.01.51.00.50.0043.502QH05QH10QH29.020QH14.5Empty Housing020 40 60 80 100 120 140 160Flow (l/min)Δp (PSID)Δp (bar)3.02.52.01.51.00.50.0043.502QH29.005QH10QH14.520QH020 40 60 80 100 120 140 160Flow (l/min)Δp (PSID)28P-1 Elements28P-2 ElementsFlow (US GPM)Flow (US GPM)0 13 26 39 53 66 790 13 26 39 53 66 793.002Q43.53.043.5Δp (bar)2.505Q2.029.010Q1.520Q1.014.50.50.00 50 100 150 200 2500300Flow (l/min)Δp (PSID)Δp (bar)2.52.01.502Q29.005Q1.010Q14.50.520Q0.00 50 100 150 200 2500300Flow (l/min)28P-1 Empty Housing and High Collapse 28P-2 High Collapse ElementsFlow (US GPM)Flow (US GPM)Δp (PSID)0 13 26 39 53 66 790 13 26 39 53 66 79Δp (bar)3.02.52.01.51.00.502QH05QH10QH 20QHEmpty Housing43.529.014.5Δp (PSID)Δp (bar)3.02.52.01.51.00.502QH05QH10QH20QH43.529.014.5Δp (PSID)0.00050 100 150 200 250 300Flow (l/min)0.00050 100 150 200 250 300Flow (l/min)137Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
18/28/38P SeriesHigh Pressure <strong>Filter</strong>sPressure Drop Curves (cont.)38P-1 Elements38P-2 ElementsFlow (US GPM)Flow (US GPM)0 26 53 79 106 132 159 1853.50 26 53 79 106 132 159 1853.5Δp (bar)3.02.52.01.51.00.50.0002Q05Q10Q20Q100 200 300 400 500 600Flow (l/min)43.529.014.50700Δp (PSID)Δp (bar)3.02.52.01.51.00.50.0043.502Q29.005Q14.510Q20Q0100 200 300 400 500 600 700Flow (l/min)Δp (PSID)38P-1 Empty Housing and High CollapseFlow (US GPM)38P-2 High Collapse ElementsFlow (US GPM)Δp (bar)0 26 53 79 106 132 159 1853.53.005QH10QH43.502QH2.520QH2.029.01.51.014.5Empty Housing0.5Δp (PSID)Δp (bar)0 26 53 79 106 132 159 1853.505QH3.010QH43.52.502QH20QH2.029.01.51.014.50.5Δp (PSID)0.00100 200 300 400 500Flow (l/min)60007000.00100 200 300 400 500Flow (l/min)6000700Element ServiceA. Stop the system’s power unit.B. Relieve any system pressure in the filter line.C. Drain the filter bowl if drain port option is provided.D. Rotate the bowl clockwise (left) and remove.E. Remove element by pulling downward with aslight twisting motion and discard.F. Check bowl o-ring and anti-extrusion ring fordamage and replace if necessary.G. Lubricate element o-ring with system fluid andlocate element in filter head.H. Install bowl by rotating counter-clockwise (right)and tighten to specified torque.18P - 22-27 Nm (16-20 ft. lbs.)28P - 35-40 Nm (25-30 ft. lbs.)38P - 80-95 Nm (60-70 ft. lbs.)I. Confirm there are no leaks after poweringthe system.Parts ListIndex Description Part number1234567Head AssemblyElementBowlIndicatorsM3 – Visual auto reset; 2.5 barM3 – Visual auto reset; 5.0 barT1 – Electrical; 2.5 bar withDIN 43650 ConnectorT1 – Electrical; 5.0 bar withDIN 43650 ConnectorF1 – Electronic PNP; 2.5 bar with 4 LEDF2 – Electronic NPN; 2.5 bar with 4 LEDF1 – Electronic PNP; 5.0 bar with 4 LEDF2 – Electronic NPN; 5.0 bar with 4 LEDBowl SealBowl Anti-extrusion RingSeal KitsSeal kit 18P (std) – NitrileSeal kit 18P (F3) – FluoroelastomerSeal kit 28P (std) – NitrileSeal kit 28P (F3) – FluoroelastomerSeal kit 38P (std) – NitrileSeal Kit 38P (F3) – Fluoroelastomersee table onnext pageS04350S04351S04352S04353S04354S04355138Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Element Service (cont.)5 4Replacement element part numbersElements with Nitrile sealsModel02Q05Q10Q20Q02QH05QH10QH20QH18P-1G04242G04243G04244G04245G04290G04291G04292G0429318P-2G04250G04251G04252G04253G04298G04299G04300G0430128P-1G04258G04259G04260G04261G04306G04307G04308G0430928P-2G04266G04267G04268G04269G04314G04315G04316G0431738P-1G04274G04275G04276G04277G04322G04323G04324G0432538P-2G04282G04283G04284G04285G04330G04331G04332G04333Elements with Fluoroelastomer seals1Model02Q05Q10Q20Q02QH05QH10QH20QH18P-1G04246G04247G04248G04249G04294G04295G04296G0429718P-2G04254G04255G04256G04257G04302G04303G04304G0430528P-1G04262G04263G04264G04265G04310G04311G04312G0431328P-2G04270G04271G04272G04273G04318G04319G04320G0432138P-1G04278G04279G04280G04281G04326G04327G04328G0432938P-2G04286G04287G04288G04289G04334G04335G04336G04337267Ordering InformationStandard products tablePart number18P110QBT1MG12118P110QBM3MG12118P120QBT1MG12118P120QBM3MG12118P210QBT1MG12118P210QBM3MG12118P220QBT1MG12118P220QBM3MG12128P110QBT1MG16128P110QBM3MG16128P120QBT1MG16128P120QBM3MG16128P210QBT1MG16128P210QBM3MG16138P110QBT1MG20138P110QBM3MG20138P120QBT1MG20138P120QBM3MG20138P210QBT1MG20138P210QBM3MG20138P220QBT1MG20138P220QBM3MG201Supersedes18P-1-10Q-TW6-98-B2B2-118P-1-10Q-M2-98-B2B2-118P-1-20Q-TW6-98-B2B2-118P-1-20Q-M2-98-B2B2-118P-2-10Q-TW6-98-B2B2-118P-2-10Q-M2-98-B2B2-118P-2-20Q-TW6-98-B2B2-118P-2-20Q-M2-98-B2B2-128P-1-10Q-TW6-98-C2C2-128P-1-10Q-M2-98-C2C2-128P-1-20Q-TW6-98-C2C2-128P-1-20Q-M2-98-C2C2-128P-2-10Q-TW6-98-C2C2-128P-2-10Q-M2-98-C2C2-138P-1-10Q-TW6-98-D2D2-138P-1-10Q-M2-98-D2D2-138P-1-20Q-TW6-98-D2D2-138P-1-20Q-M2-98-D2D2-138P-2-10Q-TW6-98-D2D2-138P-2-10Q-M2-98-D2D2-138P-2-20Q-TW6-98-D2D2-138P-2-20Q-M2-98-D2D2-1Flow(l/min)8080100100130130150150120120150150250250340340420420560560700700Modelnumber18P18P18P18P18P18P18P18P28P28P28P28P28P28P38P38P38P38P38P38P38P38PElementlengthLength 1Length 1Length 1Length 1Length 2Length 2Length 2Length 2Length 1Length 1Length 1Length 1Length 2Length 2Length 1Length 1Length 1Length 1Length 2Length 2Length 2Length 2Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above.10102020101020201010202010101010202010102020Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualElectricalVisualBypasssettings7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 barPortsG 3 /4"G 3 /4"G 3 /4"G 3 /4"G 3 /4"G 3 /4"G 3 /4"G 3 /4"G1"G1"G1"G1"G1"G1"G1 1 /4"G1 1 /4"G1 1 /4"G1 1 /4"G1 1 /4"G1 1 /4"G1 1 /4"G1 1 /4"ReplacementelementsG04244G04244G04245G04245G04252G04252G04253G04253G04260G04260G04261G04261G04268G04268G04276G04276G04277G04277G04284G04284G04285G04285139Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
18/28/38P SeriesHigh Pressure <strong>Filter</strong>sOrdering Information (cont.)Product configuratorBox 1 Box 238P1Box 310QBox 4BBox 5M3Box 6MBox 7G20Box 81Box 1CodeModelSmall size high pressure filter, T-portMedium size high pressure filter, T-portLarge size high pressure filter, T-portCode18P28P38PHighlights Key (Denotes part number availability)123123123123Item is standardItem is standard green optionItem is semi standardItem is non standardNote: Standard items are in stock, semi standard items are available within four weeksBox 2LengthLength 1Length 2<strong>Filter</strong> typeCode12Box 3Element mediaMicroglass III elementHigh collapse elementDegree of filtrationGlass fibreMedia code02Q02QH05Q05QH10Q10QH20Q20QHBox 4Seal typeSeal materialNitrileFluoroelastomerCodeBVBox 5No indicator portVisual indicatorElectrical indicatorPlugged with steel plugElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.IndicatorCodeNM3T1PF1F2F3F4Box 6Bypass and indicator settingsBypass valve3.5 bar7.0 barNo bypassNo bypassIndicator2.5 bar5.0 bar5.0 barNo indicatorCodeKMMXWhen filter includes a bypass valve but not an indicator,code denotes bypass setting.+ Box 8: code 2+ Box 8: code 2Box 7<strong>Filter</strong> connectionPorts18P: Thread G 3 /4Thread SAE 12Thread M27, ISO 6149SAE flange 3 /4" 6000-MSAE flange 3 /4" 600028P: Thread G 1Thread SAE 16Thread M33, ISO 6149SAE flange 1" 6000-MSAE flange 1" 600038P: Thread G 1 1 /4Thread G 1 1 /2Thread SAE 20Thread SAE 24Thread M42, ISO 6149Thread M48, ISO 6149SAE flange 1 1 /4" 6000-MSAE flange 1 1 /4" 6000CodeG12S12M27H12F12G16S16M33H16F16G20G24S20S24M42M48H20F20Box 8OptionsStandardNo bypassOptionsCode12<strong>Filter</strong> model18P-118P-228P-128P-238P-138P-2Part NumberS04350S04351S04352S04353S04354S04355Nominal flow (I/min) at viscosity 30 cSt02Q35708014014032005Q6011010020022044010Q8013012025034056018/28/38P Series Seal KitsDescriptionNITRILE SEAL KIT 18PFLUOROEL<strong>AS</strong>TOMER SEAL KIT 18PNITRILE SEAL KIT 28PFLUOROEL<strong>AS</strong>TOMER SEAL KIT 28PNITRILE SEAL KIT 38PFLUOROEL<strong>AS</strong>TOMER SEAL KIT 38P20Q100150150300420700ßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222DisposableMicroglass III02Q05Q10Q20QCodeHigh collapseelement02QH05QH10QH20QHNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.140Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
70/70 Eco SeriesHigh Pressure <strong>Filter</strong>sMax 450 l/min - 420 barWhen flexibilitymeets reducingenvironmentalimpactFEATURINGA proven filter offeringreduced space and pipingThe 70/70 Eco Series features arange of head and bowl sizes andconnection options. Microglass lllglassfibre and Ecoglass lll media isavailable. Maximum pressure 420 bar.Maximum flow 450 l/min. A proven,strong and robust filter for heavy dutyapplications.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• 70/70 Eco features a range of head and bowl sizes andconnection options.• Microglass III glassfibre and Ecoglass III media is available.• Maximum pressure 420 bar. Maximum flow 450 l/min.• A proven filter offering high levels of system protection.www.parkerhfde.com141Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
70/70 Eco SeriesHigh Pressure <strong>Filter</strong>sFeatures & BenefitsFeaturesFatigue tested to full pressure ratingSeveral head options andconnection sizesSeveral bowl lengthsMicroglass III replacement elementsCoreless Ecoglass III replacementelementsVisual, electrical and electronicindicators availableAdvantagesStrong and robust housing for heavy dutyapplicationsEasy mountingOptimised sizingMulti-layered design produced high capacity andefficiencyWire support reduces pleat bunching, keepsperformance consistentNo metal content in elementReduced overall weight of 50%Easy compaction of used elementsEco adaptors availableCheck element condition at a glanceRight style for the applicationBenefitsReliable and continuous operation bothin mobile and industrial applicationsReduced space and pipingRight filter for each applicationEfficient filtrationGreat performance valueReliable performance throughoutelement lifeReduces downtime, maximiseselement lifeEnvironmentally friendly disposal byincinerationLower element replacement costsLower disposal costsRetrofit coreless design to housingsalready installedOptimise element life, prevent bypassingMatches your system electricalconnectionsTypical ApplicationsForestry equipmentIndustrial power unitsPulp and paperPort handling equipmentMining and quarryingequipmentThe Parker Filtration 70/70 Eco SeriesHigh Pressure <strong>Filter</strong>s.High quality 420 bar in-line pressure filters designed tooffer high levels of protection at flows up to 450 l/min.Dirt sensitive systems can be protected withconfidence using the 70 Series high pressure filters.The 70 Series also available with environmentallyfriendly Ecoglass III elements.142Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Maximum allowable operating pressure 420 bar.<strong>Filter</strong> housing pressure pulse fatigue tested: 10 6 pulses 0 - 414 bar.Connections:Threads G1, G1 1 /4, G1 1 /2 (ISO 228/1).or flanges 1 1 /4" SAE 3000-M, 1 1 /2" SAE 3000-M, 1 1 /4" SAE 6000-M,1 1 /2" SAE 6000-M.<strong>Filter</strong> housing:Head material cast iron (GSI).Bowl material steel. Max torque 40 Nm.Seal material:Nitrile or Fluoroelastomer.Operating temperature range:Seal material Nitrile: -40°C to +100°C.Seal material Fluoroelastomer: -20°C to +120°C.Bypass valve:Opening pressure 3.5 bar.<strong>Filter</strong> element:Degree of filtration:Determined by Multipass-test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved(ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap materialreinforced composite and metal inner core.Collapse rating 20 bar (ISO 2941).Ecoglass III:Supported with plastic net, end cap material reinforced composite.No metal parts.Collapse rating 10 bar (ISO 2941).<strong>Filter</strong> element can only be used together with reusableFEA Eco-adapter.Note: Ecoglass III contributes to ISO 14001 quality.High collapse elements:(To be used when no bypass function in filter housing).Microglass III media supported with epoxy coated metal wire meshon upstream and stainless steel on downstream, end cap materialsteel. Strong metal inner core. Collapse rating 210 bar (ISO 2941).Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar or 7.0 ± 0.5 bar.2.5 bar indicators to be used with 3.5 bar bypass valve and7.0 bar indicators with no bypass function.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.Fluid compatibility:Suitable for use with mineral and vegetable oils, and somesynthetic oils. For other fluids, please consult Parker Filtration.Type1.1/4 SAE 3000 psi1.1/2 SAE 3000 psi1.1/4 SAE 6000 psi1.1/4 SAE 6000 psiSAE Flange DimensionsK58,769,966,779,4H30,235,731,736,5DLØ36G1.1/4Ø 30,3G1.1/4DT31,838,131,838,1GM10-15M12-18M14-19M16-21Spare Eco adaptors that are needed for use with or changing toEco elements are as follows<strong>Filter</strong> Type70-170-270-370-4Eco AdaptorFEA7005.BFEA7006.BFEA7007.BFEA7008.BPart Number911042090911042087911042091911042092143Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
70/70 Eco SeriesHigh Pressure <strong>Filter</strong>sSpecification70B70T70LΔp indicatorVent port32(1.25)DOutInD70(2.75)80(3.15)DOut75(2.95)70InDA72140Optionplug G 1 /4Optionplug G1 /4Internal dia. 31/external dia. 41O-ring size 220134 4 mounting holes 21 dia.(5.27)Outlet95(3.74)28(1.10)52(2.04)190(7.48)OptionPlug M12x1.522(0.86)58(2.28)Inlet108(4.25)B142(5.60)135(5.31)43(1.69)8(0.31)Optional indicator portNo. SAE-flange version70(2.75)129(5.08)B130(5.11)Ø103(4.05)62(2.44)B60(2.36)41 HEX60(2.36)41 HEXMax torque 40Nm60(2.36)Weights (kg)41 HEX(1.61)Type 70T 70L 70BLength 1 14 10.5 11.5Length 2 16.5 13 14Length 3 19 15.5 16.5Length 4 22 18.5 19.5mm(inches)144 (5.67)100 (3.94)M10 depth 1056(2.20)137(5.39)Optionplug M12x1.552(2.04)155 43(6.10) (1.69)89(3.50)M10 depth 20 (0.78)Housing for SAE flangemounting doesn’t havethese holesType A B B B Max working Port70T70B70L pressureDLength 1 116 (4.57) 249 (9.80) 295 (11.61) 235 (9.25)G1, G1 1 /4 or G1 1 /2420 barLength 2 208 (8.19) 342 (13.46) 390 (15.35) 330 (13.00)Flange 1 1 /2 SAE 3000-MLength 3Length 4329 (12.95)428 (16.85)462 (18.19)562 (22.12)510 (20.08)610 (24.01)450 (17.72)550 (21.65) 350 barFlange 1 1 /4 SAE 3000-MFlange 1 1 /2 SAE 6000-MFlange 1 1 /4 SAE 6000-M144Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Drop CurvesWith 3.5 bar bypass the recommended initial pressure drop is max 1.2 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:The total Δp = housing Δph + (element Δpe x working viscosity/30).70 Series Empty HousingFlow (US GPM)Δp (bar)01.413 26 39 53 66 79 92 106 119 13220.31.217.4B C114.5DA0.811.60.68.7E0.45.80.22.9Δp (PSID)A: 70T with G16 connectionsB: 70T with G20 connections and70L with G16 connectionsC: 70L with G20 connections and70BD: 70T with G24 connectionsE: 70L with G24 connections000 50 100 150 200 250 300 350 400 450 500Flow (l/min)70-1 Elements with Microglass III70-2 Elements with Microglass IIIFlow (US GPM)Flow (US GPM)Δp (bar)01.413 26 39 53 66 79 92 106 119 13220.302Q1.205Q 10Q 20Q17.4114.50.80.60.411.68.75.8Δp (PSID)Δp (bar)0 13 26 39 53 66 79 92 106 119 1321.420.31.210.80.60.402Q05Q10Q20Q17.414.511.68.75.8Δp (PSID)0.22.90.22.9000 50 100 150 200 250 300 350 400 450 500Flow (l/min)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)70-3 Elements with Microglass III70-4 Elements with Microglass IIIFlow (US GPM)Flow (US GPM)Δp (bar)0 13 26 39 53 66 79 92 106 119 1321.420.31.210.80.60.402Q05Q20Q10Q17.414.511.68.75.8Δp (PSID)Δp (bar)01.413 26 39 53 66 79 92 106 119 13220.31.202Q17.410.80.60.405Q10Q20Q14.511.68.75.8Δp (PSID)0.22.90.22.9000 50 100 150 200 250 300 350 400 450 500Flow (l/min)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)145Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
70/70 Eco SeriesHigh Pressure <strong>Filter</strong>sPressure Drop Curves (cont.)70-1 Elements with Ecoglass IIIFlow (US GPM)70-2 Elements with Ecoglass IIIFlow (US GPM)0 13 26 39 53 66 79 92 106 119 1321.420.305QE1.217.420QE02QE10QE114.50 13 26 39 53 66 79 92 106 119 1321.420.31.2102QE05QE10QE17.414.5Δp (bar)0.80.611.68.7Δp (PSID)Δp (bar)0.80.620QE11.68.7Δp (PSID)0.45.80.45.80.22.90.22.900 50 100 150 200 250 300 350 400 450 500Flow (l/min)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)070-3 Elements with Ecoglass III 70-4 Elements with Ecoglass IIIFlow (US GPM)Flow (US GPM)Δp (bar)0 13 26 39 53 66 79 92 106 119 1321.420.302QE1.217.410.80.605QE10QE14.511.68.7Δp (PSID)Δp (bar)0 13 26 39 53 66 79 92 106 119 1321.420.31.210.80.602QE05QE10QE17.414.511.68.7Δp (PSID)0.40.220QE5.82.90.40.220QE5.82.9000 50 100 150 200 250 300 350 400 450 500Flow (l/min)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)70-1 PRESSURE DROP CURVEHigh Collapse FC70050 13 26 39 53 66 79 92 106 1193.50QH023.002.22.01.8PRESSURE DROP CURVE70-2 High Collapse FC700602QH05QHΔp (bar)2.502.001.501.000.50QH10QH05QH20Δp (bar)1.61.41.210.80.610QH20QH002.502.2525 50 75 100 125 150 175 200Flow (l/min)70-3 PRESSURE DROP CURVEHigh Collapse FC70072.22.00.40.2000 25 50 75 100 125 150 175 200 225 250 275 300Flow (l/min)70-4 PRESSURE DROP CURVEHigh Collapse FC70082.001.75QH021.81.6QH02Δp (bar)1.501.251.000.750.500.250.00QH050 50 100 150 200 250 300 350 400 450Flow (l/min)QH10QH200146Δp (bar)1.41.210.80.60.40.2QH05QH10QH20000 50 100 150 200 250 300 350 400 450 500Flow (l/min)Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard products tablePart number70L110QBPKG16170L120QBPKG16170L210QBPKG20170L220QBPKG20170L310QBPKG24170L320QBPKG24170L410QBPKG24170L420QBPKG24170L110QEBPKG16170L120QEBPKG16170L210QEBPKG20170L220QEBPKG20170L310QEBPKG24170L320QEBPKG24170L410QEBPKG24170L420QEBPKG24170T110QBPKG16170T120QBPKG16170T210QBPKG20170T220QBPKG20170T310QBPKG24170T320QBPKG24170T410QBPKG24170T420QBPKG24170T110QEBPKG16170T120QEBPKG16170T210QEBPKG20170T220QEBPKG20170T310QEBPKG24170T320QEBPKG24170T410QEBPKG24170T420QEBPKG241SupersedesFF7005.Q010.BS35.GL16FF7005.Q020.BS35.GL16FF7006.Q010.BS35.GL20FF7006.Q020.BS35.GL20FF7007.Q010.BS35.GL24FF7007.Q020.BS35.GL24FF7008.Q010.BS35.GL24FF7008.Q020.BS35.GL24FF7005.QE10.BS35.GL16FF7005.QE20.BS35.GL16FF7006.QE10.BS35.GL20FF7006.QE20.BS35.GL20FF7007.QE10.BS35.GL24FF7007.QE20.BS35.GL24FF7008.QE10.BS35.GL24FF7008.QE20.BS35.GL24FF7005.Q010.BS35.GT16FF7005.Q020.BS35.GT16FF7006.Q010.BS35.GT20FF7006.Q020.BS35.GT20FF7007.Q010.BS35.GT24FF7007.Q020.BS35.GT24FF7008.Q010.BS35.GT24FF7008.Q020.BS35.GT24FF7005.QE10.BS35.GT16FF7005.QE20.BS35.GT16FF7006.QE10.BS35.GT20FF7006.QE20.BS35.GT20FF7007.QE10.BS35.GT24FF7007.QE20.BS35.GT24FF7008.QE10.BS35.GT24FF7008.QE20.BS35.GT24Flow(l/min)150230280300400430430450150230280300400430430450150200260280360380360380150200260280360380360380Modelnumber70L70L70L70L70L70L70L70L70L70L70L70L70L70L70L70L70T70T70T70T70T70T70T70T70T70T70T70T70T70T70T70TElementlengthNote: <strong>Filter</strong> assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above.11223344112233441122334411223344Mediarating (μ)1020102010201020102010201020102010201020102010201020102010201020Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrilePluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedBypasssettings3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 barPortsG1"G1"G1 1 /4"G1 1 /4"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1"G1"G1 1 /4"G1 1 /4"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1"G1"G1 1 /4"G1 1 /4"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"G1"G1"G1 1 /4"G1 1 /4"G1 1 /2"G1 1 /2"G1 1 /2"G1 1 /2"Replacementelements938773Q938774Q938777Q938778Q938781Q938782Q938785Q938786Q938789Q938790Q938793Q938794Q938797Q938798Q938801Q938802Q938773Q938774Q938777Q938778Q938781Q938782Q938785Q938786Q938789Q938790Q938793Q938794Q938797Q938798Q938801Q938802QSupersedesFC7005.Q010.BKFC7005.Q020.BKFC7006.Q010.BKFC7006.Q020.BKFC7007.Q010.BKFC7007.Q020.BKFC7008.Q010.BKFC7008.Q020.BKFC7005.QE10.BKFC7005.QE20.BKFC7006.QE10.BKFC7006.QE20.BKFC7007.QE10.BKFC7007.QE20.BKFC7008.QE10.BKFC7008.QE20.BKFC7005.Q010.BKFC7005.Q020.BKFC7006.Q010.BKFC7006.Q020.BKFC7007.Q010.BKFC7007.Q020.BKFC7008.Q010.BKFC7008.Q020.BKFC7005.QE10.BKFC7005.QE20.BKFC7006.QE10.BKFC7006.QE20.BKFC7007.QE10.BKFC7007.QE20.BKFC7008.QE10.BKFC7008.QE20.BKCN Series Seal KitsPart Number Description911045021 NITRILE SEAL KIT 70/70 Eco911045051 FLUOROEL<strong>AS</strong>TOMER SEAL KIT 70/70 Eco147Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
70/70 Eco SeriesHigh Pressure <strong>Filter</strong>sOrdering Information (cont.)Product configuratorBox 1 Box 270L3Box 310QBox 4BBox 5M3Box 6KBox 7G24Box 81Box 1CodeModelHigh pressure filter with L-portHigh pressure filter with T-portHigh pressure filter with side manifold mountingBox 4Seal typeSeal materialNitrileFluoroelastomerBox 7ConnectionsThread G 1Thread G 1 1 /4Thread G 1 1 /2SAE flange 1 1 /4" 3000-MSAE flange 1 1 /2" 3000-MSAE flange 1 1 /4" 6000-MSAE flange 1 1 /2" 6000-MSide manifold (70B only)CodeBVCodeG16G20G24R20R24H20H24X32Availability: S = standard productx = non-standard, ask for availabilityCode70L70T70BBox 5Box 2LengthLength 1Length 2Length 3Length 4<strong>Filter</strong> typePlugged with steel plugVisual indicatorElectrical indicatorElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.<strong>Filter</strong> connectionLength 1SSxxxxxxLength 2SSSxxxxxIndicatorLength 3xSSxxxxxCode1234Box 3Element mediaMicroglass III elementEcoglass III elementHigh collapse elementNote: When using Ecoglass III elements reusable Eco-adaptor is requiredLength 4xSSxxxxxCodePM3T1F1F2F3F4Box 6Bypass and indicator settingsBypass valve3.5 barNo bypassNo bypassBox 8OptionsOptionsStandardNo bypassDrain port70T: side indicator ports70T: options 2+6Degree of filtrationGlass fibreMedia code02Q02QE02QH05Q05QE05QHIndicator2.5 bar7.0 barNo indicator (P)Code12468CodeKNX10Q10QE10QHWhen filter includes a bypass valve but not an indicator,code denotes bypass setting.Options 6 and 8: in 70T model there is an option for 2 x indicatorports on filter outlet flange (standard indicator port not machined)P: both side indicator ports plugged with steel plugM3 or other indicator chosen: right side (in flow direction) portplugged with a plastic plug, left with a steel plug20Q20QE20QH+ Box 8: code 2+ Box 8: code 2<strong>Filter</strong> lengthLength 1Length 2Length 3Length 4Media02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QENominal flow (I/min) at viscosity 30 cStG16 T-port80120150200160180220240200220240250220230250260G16 L-port &G20 T-port80120150230160200260280220250280300250260280300G20 L-port &Side manifold80120150230160200280300220280300320270300330350G24 T-port80120150230160200300330220280350380270330360380G24 L-port80120150230160200320350220280400430270330430450Media02Q05Q10Q20Q02QE05QE10QE20QE02QH05QH10QH20QH123123123123Replacement elements with nitrile sealsLength 1938771Q938772Q938773Q938774Q938787Q938788Q938789Q938790Q938803Q938804Q938805Q938806QLength 2938775Q938776Q938777Q938778Q938791Q938792Q938793Q938794Q938807Q938808Q938809Q938810QItem is standardItem is standard green optionItem is semi standardItem is non standardLength 3938779Q938780Q938781Q938782Q938795Q938796Q938797Q938798Q938811Q938812Q938813Q938814QHighlights Key (Denotes part number availability)Length 4938783Q938784Q938785Q938786Q938799Q938800Q938801Q938802Q938815Q938816Q938817Q938818QNote: Standard items are in stock, semi standard items are available withinfour weeksßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222DisposableMicroglass III02Q05Q10Q20QCodeMetal freeEcoglass III02QE05QE10QE20QEHigh collapseelement02QH05QH10QH20QHNote 1: Part numbers featured with boldhighlighted codes will ensure a ‘standard’product selection.Note 2: Alternate displayed part numberselection will require you to contact ParkerFiltration for availability.148Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
22PD/32PD SeriesHigh Pressure Duplex <strong>Filter</strong>sMax 260 l/min - 210 barA duplex design witha wide applicationcapabilityDesigned to offer continuousoperation during elementchangeThe 22PD/32PD Series utilizesa duplex design with integratedbalancing valve and vent ports.Microglass lll glassfibre media isstandard. Maximum pressure 210bar. Maximum flow 260 l/min. Achangeover valve operates on theupstream side of the filter, ensuring acontamination free system.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• 22PD/32PD utilizes a duplex design with integratedbalancing valve and vent ports.• Microglass III glassfibre media is standard.• Maximum pressure 210 bar. Maximum flow 260 l/min.• Designed to offer continuous operation during elementchange.www.parkerhfde.com149Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
22PD/32PD SeriesHigh Pressure Duplex <strong>Filter</strong>sFeatures & BenefitsFeaturesDuplex designIntegrated balancing valveVent portsMicroglass III replacement elementsVisual, electrical and electronicindicators availableAdvantagesElement service possible during operationNo external piping requiredPurges all trapped air in filterMulti-layered design produced high capacityand efficiencyWire support reduces pleat bunching, keepsperformance consistentCheck element condition at a glanceRight style for the applicationBenefitsAllows to keep machine running withfull contamination protectionSafety and reliabilityGet the maximum performance fromthe elementsPrevents a "flabby" systemGreat performance valueReliable performance throughoutelement lifeReduces downtime, maximiseselement lifeOptimises element life, preventsbypassingMatches your system electricalconnectionsTypical ApplicationsShip steering systemsContinuous operationindustrial systemsHigh flow flushing systemsThe Parker Filtration 22PD/32PD SeriesHigh Pressure Duplex <strong>Filter</strong>s.Specially designed to offer continuous operation,even during element change.A changeover valve operates on the upstream sideof the filter, ensuring a contamination free system.150Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ratings:Maximum allowable operating pressure 210 bar.<strong>Filter</strong> housing pressure pulse fatigue tested: 10 6 cycles 210 bar.Connections:Inlet and outlet connections are threaded.Connection style Model22PD 32PDBSPF(G) 1” 1 1 /4”Flange SAE 3000-M 1 1 /4” 1 1 /2”*3000-M is a SAE style with appropriate metric fixing threads.<strong>Filter</strong> housing:Head material cast iron (GSI).Bowl material steel.Seal material:Nitrile or Fluoroelastomer.Operating temperature range:Seal material Nitrile: -40°C to +100°C.Seal material Fluoroelastomer: -20°C to +120°C.Bypass valve:Opening pressure 3.5 bar<strong>Filter</strong> element:Degree of filtration:Determined by multipass-test according to ISO 16889.Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved(ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap materialreinforced composite and metal inner core. Collapse rating 20 bar(ISO 2941).High collapse elements:(to be used when no bypass function in filter housing).Microglass III media supported with epoxy coated metal wire mesh onupstream and stainless steel on downstream, end cap material steel.Strong metal inner core. Collapse rating 210 bar (ISO 2941).Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.Weights (kg):Model Length 1 Length 222PD 22 2732PD 44 50Fluid compatibility:Suitable for use with mineral and vegetable oils, and some synthetic oils.For other fluids, please consult Parker Filtration.Dimensions mm (inches)Model A B C D E F G H I J K L M N22PD-122-PD-232PD-132PD-2240(9.45)306(12.05)35(1.38)42(1.65)92(3.62)130(5.12)18(0.71)20(0.79)55(2.16)78(3.07)150(5.91)170(6.69)150(5.90)165(6.49)96(3.70)120(4.72)192(7.56)240(9.45)60(2.36)75(2.95)30(1.18)36(1.42)59(2.32)70(2.75)30.75Ø38Ø236 (9.29)345 (13.58)317 (12.48)437 (17.20)ADIndicator locationInOutBmm(inches)JIGEN40 mounting holes22PD: M8x1.2 pitchx12 deep32PD: M10x1.5 pitchx15 deepH2 bleedholesG 1 /8FChangeoverhandleBalance valveBleed valveHexagon22PD24 A/F32PD36 A/FCBowlremoval100mm(3.93)Flange face detailLBoth 22PD & 32PDM12x1.72 pitchx20 deepMK151Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
22PD/32PD SeriesHigh Pressure Duplex <strong>Filter</strong>sPressure Drop CurvesThe recommended level of initial pressure drop is max. 1.2 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:Δp =(Δp30 x viscosity of medium used) / 30 cSt.The total Δp = housing Δph + (element Δpe x working viscosity/30).22PD/32PD Bypass ValveFlow (US GPM)0 13 26 39 53 66 79 92 1063.043.522PD/32PD Empty HousingFlow (US GPM)0 13 26 39 53 66 79 92 1062.029.0Δp (bar)2.52.01.51.00.5CrackingPressure36.329.021.814.57.3Δp (PSID)Δp (bar)1.51.00.522PD32PD21.814.57.3Δp (PSID)0.00 50 100 150 200 250 300 3500400Flow (l/min)0.00 50 100 150 200 250 300 3500400Flow (l/min)22PD-1 ElementsFlow (US GPM)03.013 26 39 53 66 7943.522PD-2 ElementsFlow (US GPM)03.013 26 39 53 66 7943.5Δp (bar)2.52.01.51.00.502Q05Q10Q20Q36.329.021.814.57.3Δp (PSID)Δp (bar)2.52.01.51.00.502Q20Q05Q10Q36.329.021.814.57.3Δp (PSID)0.00050 100 150 200 250 300Flow (l/min)0.00050 100 150 200 250 300Flow (l/min)32PD-1 Elements32PD-2 ElementsFlow (US GPM)Flow (US GPM)0 13 26 39 53 66 793.043.53.00 13 26 39 53 66 7943.52.536.32.536.3Δp (bar)2.01.51.00.50.0029.002Q21.805Q14.510Q7.320Q050 100 150 200 250 300Flow (l/min)Δp (PSID)Δp (bar)2.01.51.00.50.0029.021.802Q14.505Q10Q7.320Q050 100 150 200 250 300Flow (l/min)Δp (PSID)152Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
22PD-1 High Collapse ElementsFlow (US GPM)3.00 13 26 39 53 66 7943.522PD-2 High Collapse ElementsFlow (US GPM)03.013 26 39 53 66 7943.5Δp (bar)2.52.01.51.002QH05QH10QH20QH36.329.021.814.5Δp (PSID)Δp (bar)2.52.01.51.002QH05QH10QH20QH36.329.021.814.5Δp (PSID)0.57.30.57.30.00050 100 150 200 250 300Flow (l/min)0.00050 100 150 200 250 300Flow (l/min)32PD-1 High Collapse Elements32PD-2 High Collapse ElementsFlow (US GPM)Flow (US GPM)0 13 26 39 53 66 793.043.50 13 26 39 53 66 793.043.5Δp (bar)2.52.01.51.00.502QH05QH20QH10QH36.329.021.814.57.3Δp (PSID)Δp (bar)2.52.01.51.00.502QH05QH10QH20QH36.329.021.814.57.3Δp (PSID)0.00050 100 150 200 250 300Flow (l/min)0.00050 100 150 200 250 300Flow (l/min)Ordering InformationStandard products tablePart number22PD210QBM3KG16122PD210QBT1KG16122PD220QBM3KG16122PD220QBT1KG16132PD210QBM3KG20132PD210QBT1KG20132PD220QBM3KG20132PD220QBT1KG201Supersedes0-22-PD-2-10Q-V-50-C-10-22-PD-2-10Q-TW3-50-C-10-22-PD-2-20Q-V-50-C-10-22-PD-2-20Q-TW3-50-C-10-32-PD-2-10Q-V-50-D-10-32-PD-2-10Q-TW3-50-D-10-32-PD-2-20Q-V-50-D-10-32-PD-2-20Q-TW3-50-D-1Flow(l/min)120120140140240240260260Modelnumber22PD22PD22PD22PD32PD32PD32PD32PDElementlengthLength 2Length 2Length 2Length 2Length 2Length 2Length 2Length 2Mediarating (μ)Note: <strong>Filter</strong> assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above.1010202010102020Seals IndicatorNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileVisualElectricalVisualElectricalVisualElectricalVisualElectricalBypasssettings3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 barPortsG1"G1"G1"G1"G1 1 /4"G1 1 /4"G1 1 /4"G1 1 /4"ReplacementelementsG01315QG01315QG01938QG01938QG01098QG01098QG01954QG01954QPart NumberS04233S04234S04234S0423422PD/32PD Series Seal KitsDescriptionNITRILE SEAL KIT 22PDFLUOROEL<strong>AS</strong>TOMER SEAL KIT 22PDNITRILE SEAL KIT 32PDFLUOROEL<strong>AS</strong>TOMER SEAL KIT 32PD153Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
22PD/32PD SeriesHigh Pressure Duplex <strong>Filter</strong>sOrdering Information (cont.)Product configuratorBox 1 Box 222PD 2Box 310QBox 4BBox 5M3Box 6KBox 7G16Box 81Box 1CodeModelSmall high pressure duplex filterLarge high pressure duplex filterCode22PD32PDBox 2LengthLength 1Length 2<strong>Filter</strong> typeCode12Box 3Element mediaMicroglass III elementHigh collapse elementDegree of filtrationGlass fibreMedia code02Q02QH05Q05QH10Q10QH20Q20QHBox 4Seal typeSeal materialNitrileFluoroelastomerCodeBVBox 5Visual indicatorElectrical indicatorPlugged with steel plugNo indicator portElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.IndicatorCodeM3T1PNF1F2F3F4Box 6Bypass and indicator settingsBypass valve3.5 barNo bypassNo bypassIndicator2.5 bar5.0 barNo indicatorCodeKMXWhen filter includes a bypass valve but not an indicator,code denotes bypass setting.+ Box 8: code 2+ Box 8: code 2Box 7<strong>Filter</strong> connectionPorts22PD: Thread G 1SAE flange 1 1 /4" 3000-M32PD: Thread G 1 1 /4SAE flange 1 1 /2" 3000-MCodeG16R20G20R24Box 8OptionsStandardNo bypassOptionsCode12Media02Q05Q10Q20Q02QH05QH10QH20QHMedia02Q05Q10Q20Q02QH05QH10QH20QHReplacement elements with nitrile seals22PD-1G01282QG02721QG01281QG01930QG01442QG03737QG01441QG01932Q22PD-2G01316QG02724QG01315QG01938QG01448QG03738QG01447QG01940Q32PD-1G01069QG02567QG01068QG01946QG01454QG03739QG01453QG01948Q32PD-2G01099QG02727QG01098QG01954QG01460QG03740QG01459QG01956QReplacement elements with fluoroelastomer seals22PD-1G01302QG02723QG01301QG01934QG01446QG04235QG01445QG01935Q22PD-2G01336QG02726QG01335QG01942QG01452QG04236QG01451QG01943Q32PD-1G01089QG02569QG01088QG01950QG01458QG04237QG01457QG01951Q32PD-2G01119QG02729QG01118QG01958QG01464QG04238QG01463QG01959Q<strong>Filter</strong> model22PD-122PD-232PD-132PD-2<strong>Filter</strong> model22PD32PDNominal flow (I/min) at viscosity 30 cSt02Q70100100180Seal kitsNitrileS04233S0352012312312312305Q80110150210FluoroelastomerS04234S0352210Q100120210240Item is standardItem is standard green optionItem is semi standardItem is non standard20Q120140230260Highlights Key (Denotes part number availability)Note: Standard items are in stock, semi standard items are available within four weeksßx(c)=250.0%N/AN/AN/A6Degree of filtrationAverage filtration beta ratio ß (ISO 16889) / particle size μm [c]ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000% efficiency, based on the above beta ratio (ßx)90.0%N/AN/A61198.7%N/A4.58.51799.0%N/A591899.5%N/A6102099.9%4.571222DisposableMicroglass III02Q05Q10Q20QCodeHigh collapseelement02QH05QH10QH20QHNote 1: Part numbers featured with bold highlighted codeswill ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection willrequire you to contact Parker Filtration for availability.154Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Indicators SeriesFMU Δp-Indicators and Pressure IndicatorsMax 420 barMeasuring criticalsystem parametersis essentialReliable and continuouscontrol of the filter in allapplicationsThe FMU range of filter conditionindicators are designed for use ona wide range of Parker filters andcompetitive interchange filters.Maximum pressure 420 bar. Acomprehensive range of high qualityindicators for mobile, industrial andmarine applications.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• The FMU range of filter condition indicators, designed for useon a wide range of Parker filters.• Accurate visual, electronic or electrical filter conditionfeedback.• Maximum pressure 420 bar.• Mobile, industrial and marine applications.www.parkerhfde.com155Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Indicators SeriesFMU Δp-Indicators and Pressure IndicatorsFeatures & BenefitsFeaturesIndicators fatigue tested to fullpressure ratingCartridge screw-in type indicatorsVisual, electrical and electronicindicators availableSeveral indication settingsVisual indicatorsElectrical indicator withchange-over switchElectrical indicator with 4 LEDsProgrammable and ATEX certifiedindicators availableAdvantagesReliable indicators for heavy duty applicationsEasy mountingCheck element condition at a glanceRight style for the applicationOptimized for each bypass settingLocal monitoring of the element conditionOption of Normally Open (N.0.) and NormallyClosed (N.C.) functionThermal lock-outVisual early warning with yellow LEDPre-alarm with yellow LED and wired outputAlarm with red LED and wired outputRight indicators for special applicationsBenefitsReliable and continuous control of thefilter in all applicationsReliable sealing, no leakageOptimises element life, prevents bypassingMatch your system’s electrical connectionsRight indicator for applicationReliable low cost indicatorApproved for low voltage and highvoltage use including machine controlsystems and PLC’sNo false alarm because of lowtemperature oilAllows time to schedule element changeIndicates upcoming element changeClear indication for element changeImproved machine surveillanceTypical ApplicationsIndustrial equipmentMobile equipmentMarine/offshore applicationsThe Parker FMU SeriesDifferential Pressure IndicatorsThe FMU range of filter condition indicators, aredesigned for use on a wide range of Parker filtersand suitable for competitive interchange (consultParker Filtration for details).Ideal for giving accurate visual, electronic or electricalfeedback of filter element condition, in order tofacilitate effective maintenance and ensuringhydraulic systems, marine/mobile or industrial areprotected from particulate contamination.156Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationMaximum operating pressure:420 bar (250 bar for aluminium).Maximum differential pressure:210 bar.Working temperature range:-20˚C to +85˚C with fluoroelastomer seals, -40°C to+85°C with nitrileand EPDM seals.Material of housing:Brass, aluminium or stainless steel.Seals:Fluoroelastomer, Nitrile or EPDM.Mounting torque:max. 75 Nm(max. 50 Nm for aluminium indicator body & filter housing)The differential pressure values ofstandard indicator models:1.2 bar ± 0.21.5 bar ± 0.22.5 bar ± 0.35.0 bar ± 0.57.0 bar ± 0.58.5 bar ± 0.5(Indicators for other differential pressure values are optional).FMU Δp – Indicators are typically used with the following filters:Heavy duty filters: GS, SF1040, DF2035, DF2050, DFH2060, DF2070, DF2089, DF2110Note: FMU-Block is required to connect indicator to filter.Medium pressure filters series: 45M.High pressure filters series: 70L, 70T, 70B, 5000, 7100 and 7200.Heavy duty filter series: 130M, DF2145.High pressure filters without bypass valve: 70L, 70T, 70B, 7100 and 7200.Medium and low pressure filter series;Note for PD Range only 2.5 bar indicators are available: 15CN, 40CN, 80CN, 22PD, 32PD, 15P,30P, 40RF, 50RF, IL8, 12M, 22M, 16P, 26P, 36P. Also heavy duty filter DF40.High pressure filters 18P, 28P, 38P, FDA, FDBU12HU12HU12HU14MU14H1.0 and 1.5 bar2.5 bar7.0 bar1.2 and 2.5 bar2.5 and 5.0 bar157Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Indicators SeriesFMU Δp-Indicators and Pressure IndicatorsFMUT ElectricalRatedvoltageNon-inductive load (A) Inductive load (A)InrushResistive load Lamp load Inductive load Motor load current (A)N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O.125VAC 5 1.5 0.7 3 2.5 1.3250VAC 3 1.0 0.5 2 1.5 0.88VDC 5 2 5 4 314VDC 5 2 4 4 330VDC 4 2 3 3 3125VDC 0.4 0.05 0.4 0.4 0.05250VDC 0.2 0.03 0.2 0.2 0.0320max.10max.Enclosure class IP65Electrical connector DIN 43650Overvoltage category II (EN61010-1)Contact configurationP1-P2Rotating part 360°COMIndication (N.O)Normally closed (N.C)NoconnectP1 high pressureP2 low pressureFMUM3 Visual Auto Reset/FMUM1 Visual Manual ResetOperationFixed part27.5 75¾-16 UNF-2ARed colourvisible whenindicator onU12H modelø24M1-type pushhere for resetOperationU14M modelRed colourvisible whenindicator onU14H model60High pressureLow pressure27.555.53/4-16 UNF-2A32Low pressureHigh pressure7/8 - 14UNF - 2A7/8 - 14UNF - 2A+ø19.78 - 0.06+ø18.83 - 0.06Note: Only FPUM3visual auto reset availablefor models U14M andU14H. FMUM1 notavailable.158Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
FMUF ElectronicContact configurationU12H modelNPNFMU F3+VNPN1Load+10...36 Vdc Rotating part 360°2Load40Vmax 300 mAGreen LEDYellow LED’sPNPRed LEDFixed partAU12H U14M U14HA 98 105 105B 27.5 32 32C Ø16.2 Ø19.78 Ø18.83±0.05 ± 0.06 ± 0.06D 3 /4-16 7 /8-14 7 /8-14UNF-2A UNF-2A UNF-2AFMU FPNP31Load+V+10...36 VdcHigh pressureB42Loadmax 300 mAThermal lock-out (standard setting +20°C)Indicator operates only when temperature is above setting.Green LED is blinking if temperature is lower. (not in U12H)Ind. press. LED status OutputsettingG Y1 Y2 R
Indicators SeriesFMU Δp-Indicators and Pressure IndicatorsOrdering InformationProduct configuratorBox 1 Box 2FMU M3Box 3KBox 4VBox 5MBox 6U14Box 7HBox 8Indicator series<strong>Filter</strong> monitoring unitCodeCodeFMUBox 2<strong>Filter</strong> typeDifferential pressure indicatorVisual manual resetVisual autoresetElectricalElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.Programmable with memory logsEx versionCodeM1*M3T1F1F2F3F4L1X1Box 3Indicator settingStandard settings:a: U14M, former -W3b: U14H, former -W6c: U12H, former -F6Indicator settingStandardcaca, b, cbcCodeFGHKMNPBox 4Seal materialNitrileFluorelastomerEPDMNeoprenSeal typeCodeBVENBox 5Indicator bodyIndicator bodyAluminium (Box 7, code M)Brass (Box 7, code M and H)Stainless steelCodeAMRBox 6Thread connectionThread connection3/4" - 16UNF-2A7/8" - 14UNF-2ACodeU12U14Box 7 A - class productsMax PressureMax pressureCN, 15/30P & 22/32 PP Series45M, 130M, 70P & 18/28/38PCodeMHBox 8OptionsStandardOther optionsOptionsCodeomitfactory suppliedNote: F and L type indicators. Non-standard thermallockout settings shown here.FMUX ATEX Approved ElectronicCable 10 meterØ3257Specification:•Equipmentcategory 2 (forzone 1): Ex II 2GD Eex m II T6• Max temperature 85°C• Supply Voltage: 10 – 36 Vdc•Current 300 mA (max)•I kmax :1A• HalogenfreecableIndicator type X1: ATEX Δp-indicatorElectronic indicator accordant with ATEX 94/9/EC directive: (Ex) II 2 GDEex mII T6.Degree of protection IP66. X1 refers to NPN, N.O. (see electronic FType). Other output options are available by request.Connection cable + software for programmable indicator L1Connection cable for PC serial connection and software for indicatorsettings and utilising memory logs.Ordering Code: 905075030Seal kits (fluoroelastomer)Ordering codeIndicators with thread connection U12H (former -F6) 911045078Indicators with thread connection U14M (former -W3) 911045086Indicators with thread connection U14H (former -W6) 911045087HEX 24 (Ø 26.5 mm)3/4-16UNF-2AU12H(F6) shapeNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.160Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Pressure Indicators for Low Pressure <strong>Filter</strong>sETF <strong>Filter</strong>Visual pressure indicatorCode G2mm (inches)G 1 /848 Vdc electrical indicator 1.0 barCode S2/S3mm (inches)31(1.22)250 VAC electrical indicator 1.0 barCode S4mm (inches)Rotatingpart 360°30 (1.18) x30 (1.18)38(1.49)40(1.57)67(2.64)HEX 24(0.94)56(2.20)44 (1.73)C32NO1NC74(2.91)32(1.26)10(0.39)HEX 27(1.06)Option Description Connection/Voltage Wiring Part numberG 1 /8KG 1 /8K10 (0.39)Fixed partG2Visual indicator1.0 barN/AN/AFMUG2FBMG02LS2/S3Electrical indicator1.0 bar42 VdcmaxSelect either normally open (NO)or normally closed (NC)FMUS2FBMG02L(NO switch)orFMUS3FBMG02L(NC switch)Normally open contactsS4Electrical indicator1.0 bar250 Vacmax1 NC2 NO3 CFMUS4FBMG02LNormally closed contactsTTF, BGT and TPRIndicator PS pressure switchProtective capwith dual cable ductfor 1, 7-2, 3mm diameter cableIndicator PS NO/NC pressure switchProtective coverNormally open contacts75Amp 6.3x8terminals2 31Switch74Normally closed contacts5827 A/F1 = COM.2 = N.C.3 = N.O.5524 A/F99M10x1G 1 /8 (BSP)Ø30.5Ø28Elec.ratingThread connectionElec.connectionProtectionCodeSpecifications42V/4AG118AMP 6.3x0.8 terminals + protective capIP65 (with cap) terminals IP00FMUS14EBME02 L (Switch)SpecificationsElec.rating42V/2AThread connection G 1 /8Elec.connection AMP terminal 6.3x0.8ProtectionIP65 (terminal IP00)Switch typeNO or NCCodeFMUS2EBMG02L (NO switch)FMUS3EBMG02L (NC switch)Visual indicatorG 1 /8: code1.2 barFMUG2EBPG02L161Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
GS SeriesMedium Pressure <strong>Filter</strong>sMax. 350 l/min. - 40 barIn-line peace ofmindThree different housing sizes andseveral media options allow a widerange of applications. Cast ironhousings are operable up to 40 bars.Pre-filtration with magnets is availableas well as several connection options.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comTypical application examples.At the top of each productsection, a ‘typical application’photo example has beenincluded.Applications:• Industrial gear boxes• Heavy fuel oil filter for diesel engines• Suction filter for fuel systems• Medium pressure hydraulic filterProviding heavy duty filtration solutionsParker can provide correct filtration solutions for a multitude offuel, gas, hydraulic oil and lubrication systems. A wide selectionof low and medium pressure multi-purpose filters that offerseveral different filter elements – environmentally sound choicestoo – allowing highly customized solutions. Duplex filters andthe ability to bank multiple filters together enables continuousfiltration during element changes. Parker’s heavy duty solutionsfor clean fluids and peace of mind.162Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationAssembly:In-line filterMaximum operating pressure:40 bar. For DN80 flanges 16 bar.Nominal flow rate (30cSt):350 l/min (21 m 3 /h)Connections:Threads G1 for GS2 and G1½ for GS6 and GS7. GS7 isavailable also with flanges DN80/PN16.Seal material:Fluoroelastomer or optionally nitrileOperating temperature:-40°C...+100°C with Nitrile seals, -20°C...+120°C withFluoroelastomer seals, -20°C...+160°C with metal meshelements and Fluoroelastomer seals.Housing material:Cast ironWeight:See dimensions tableMagnet pack:Available as optionBypass valve:Standard opening pressure 1.6 bar, optionally withblocked bypassIndicator options:Visual, electrical or electronic indicator requires anindicator block. For details see indicator options tableon product description page and catalogue section 4.Filtration materials:• Glassfibre Microglass III• Cleanable metal meshFluid compatibility:Suitable for use with regular hydraulic and lubricationoils and fuel oils. For other fluids consult ParkerFiltration.Flange DN80/PN16 for GS7-D80 versionType Weight A D F G H J K L M N P R S T UGS2 5.5 kg 150 G1 170 27 83 125 45 275 11 108 71 118 159 32 200GS6 12 kg 190 G1½ 230 38 112 170 64 350 13 148 106 139 180 55 210GS7 15 kg 260 G1½ 230 38 112 170 64 420 13 148 106 139 180 55 240GS7-D80 24 kg 260 80 310 - 112 - 200 420 - 148 106 139 180 55 240163Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
GS SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStGS Series housingsFlow [m 3 /h]0 3 6 9 12 15 18 21 24 27 30Elements for GS2Flow [m 3 /h]0 1 2 3 4 5 6 7 8 9Elements for GS6Flow [m 3 /h]0 3 6 9 12 15 18Elements for GS7Flow [m 3 /h]0 3 6 9 12 15 18 21 24 27 30REPLACEMENT ELEMENTS (with Fluoroelastomer or Nitrile seal)Media code Order code for GS2 Order code for GS6 Order code for GS7Glassfibre Standard (no seal) Fluoroelastomer Nitrile Fluoroelastomer Nitrile02Q 937973Q 938208Q 937747Q 938209Q 937746Q05Q 937974Q 938361Q 937758Q 938364Q 937759Q10Q 937952Q 938362Q 937783Q 938075Q 937782Q20Q 937953Q 938363Q 937794Q 938005Q 937795QCleanable metal mesh035W 939180 939182 NA 939184 NA060W 939181 939183 NA 939185 NA164Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for GSComplete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8Table 1FILTER TYPEModelCODEMedium pressure filter, cast ironGSTable 2FILTER SIZEHousing size - element lengthCODE1-60 (former 1087) 22-170 (former 1088) 62-230 (former 1089) 7Table 3DEGREE OF FILTRATIONElement typeCODEMicroglass IIIGlassfibre 2 μm02QGlassfibre 5 μm05QGlassfibre 10 μm10QGlassfibre 20 μm20QOther mediasCleanable metal mesh 35 μm035WCleanable metal mesh 60 μm060WTable 5INDICATORSOptionsCODENo indicator blockNIndicator port pluggedPVisual indicatorM3Electrical indicatorT1Electronic indicator (PNP/N.O.)F1Electronic indicator (NPN/N.O.)F2Table 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE1.6 bar/1.0 bar FNo/NoXTable 7FILTER CONNECTIONSPort sizeCODEG1 (length 2)G16G1½ (length 6 and 7)G24Flange DN80 (length 7)D80Table 4SEAL TYPESeal materialNitrileFluoroelastomerCODEBVTable 8OPTIONSOptionsCODEWith bypass and magnets 1No bypass, with magnets 2With bypass, no magnets 5No bypass, no magnets 6Safety guard, no bypass, no magnets 7SPARE PARTSSeal kitCODESeal material GS2 GS6-7Fluoroelastomer 918045044 918045038Nitrile 918045034 918045023Please note the bolded options reflect standard options with reduced lead-time.165Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
GA SeriesMedium Pressure <strong>Filter</strong>sMax. 230 l/min. 30 barContamination-proofand customizablefilter solutionDesigned for various applications.In-out filter principle means there isno possibility for contaminated leakback into the system. Supplied withmagnetic pre-filtration. Customizablefor filter coolants thus ideal for metalcutting equipment. Visual or electronicdifferential pressure indicators andenvironmentally friendly filtrationelements available.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Gearboxes• Bypass filtration• Stone crushers• Lube oil systems• Metal cutting equipmentwww.parkerhfde.com166Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationAssembly:In-line filterMaximum operating pressure:30 barNominal flow rate (30 cSt):230 l/min (13.8 m 3 /h)Connections:Threaded BSP ports. SAE ports available by request.Seal material:Nitrile, optionally Fluoroelastomer or NeopreneOperating temperature:-40°C...+100°C with Nitrile seals, -20°C...+120°C withFluoroelastomer seals. For other temperatures consultParker Filtration.Housing material:AluminiumWeight:See dimensions tableBypass setting:Opening pressure standard 1.5 bar, optionally 0.8 bar,2.0 bar or blocked bypassFiltration materials:• Ecoglass for LEIF® element with reusable metalelement sleeve. LEIF® contributes to ISO14001.• Glassfibre Microglass III• Resin impregnated cellulose paper 10 μm nominal• Cleanable metal meshMagnetic pack:StandardDifferential pressure indicators:Visual or Visual-electrical indicatorSetting 1.2 bar (for 2.0 bar and 1.5 bar bypass)or 0.7 bar (for 0.8 bar bypass)Fluid compatibility:Suitable for use with regular hydraulic and lubricationoils. For other fluids consult Parker Filtration.Type A B C D E F G H K L M N P S T U V KgBSP ISO228 SAEGA1-30 150 106 32 G¾ 12 70 180 3 50 24 95 9 44 20 28 143 86 63 2.1GA1-60 160 106 32 G1 16 70 235 18 50 24 95 9 54 20 29 194 86 63 2.6GA1-90 160 106 32 G1 16 70 275 29 50 24 95 9 54 20 29 238 86 63 3.2GA1-120 160 106 32 G1¼ 20 70 325 46 50 24 95 9 64 20 29 288 86 63 4.0GA2-170 230 150 55 G1½ 24 105 390 35 75 37 140 12 72 25 43 338 110 88 7.9GA2-230 230 150 55 G1½ 24 105 460 58 75 37 140 12 72 25 43 408 110 88 9.0167Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Visual Indicator - Manifold connected to filter housingCode (0.7 bar setting)FMUD5BBAXXXLCode (1.2 bar setting)FMUD5EBAXXXLElectrical Indicator - Manifold connected to filter housingCode (0.7 bar setting and NO type switch)FMUE5BBAXXXLCode (1.2 bar setting and NO type switch)FMUE5EBAXXXLElectric rating120Vac/12VA or 100Vdc/10WElectrical connectionAMP terminal 6.3. x 0.8 with plugged cable glandProtectionIP65Switch typeNO (NC request)Pressure Drop Curves for HousingΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStGA1 housingsFlow [m 3 /h]0 1 2 3 4 5 6 7 8 9GA2-170/230 housingsFlow [m 3 /h]0 3 6 9 12 15 18168Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
GA SeriesPressure Drop Curves for ElementsGA1-30 elements (Length 0)Flow [m 3 /h]0 1 2 3GA1-60 elements (Length 2)Flow [m 3 /h]0 1 2 3 4 5 6GA1-90 elements (Length 3)Flow [m 3 /h]0 3 6 9GA1-120 elements (Length 4)Flow [m 3 /h]0 3 6 9 12GA2-170 elements (Length 6)Flow [m 3 /h]0 3 6 9 12 15GA2-230 elements (Length 7)Flow [m 3 /h]0 3 6 9 12 15 18169Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
GA SeriesMedium Pressure <strong>Filter</strong>sProduct Description for GAComplete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8Table 1FILTER TYPEModelCODEMedium pressure filter, aluminiumGATable 2FILTER SIZEHousing size - element lengthCODE1-30 01-60 21-90 31-120 42-170 62-230 7Table 3DEGREE OF FILTRATIONElement typeCODEMicroglass IIIGlassfibre 2 μm02QGlassfibre 5 μm05QGlassfibre 10 μm10QGlassfibre 20 μm20QLEIF ® elementsGlassfibre 2 μm02QLGlassfibre 5 μm05QLGlassfibre 10 μm10QLGlassfibre 20 μm20QLOther mediasCellulose 10 μm (nom)10CCleanable metal mesh 40 μm040WTable 4SEAL TYPESeal materialCODENitrileBFluoroelastomerVNeopreneNTable 5INDICATORSOptionsCODEVisual indicator on right*D3Visual indicator on left*D4Visual-electrical indicator on right*E3Visual-electrical indicator on left*E4Both indicator ports pluggedP2* Indicator ports on other side machined and plugged.Table 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE0.8 bar/0.7 bar B1.5 bar/1.2 bar E2.0 bar/1.2 bar HNo/NoXTable 7FILTER CONNECTIONSPort sizeCODEG¾ (length 0)G12G1 (length 2 and 3)G16G1¼ (length 4)G20G1½ (length 6 and 7)G24Table 8OPTIONSOptionsCODEWith bypass and magnets 1No bypass, with magnets 2With bypass, no magnets 5No bypass, no magnets 6170Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
CONVENTIONAL TYPE REPLACEMENT ELEMENTS WITH NITRILE SEALSElementlengthHousingsizeMicroglass III02Q 05Q 10Q 20QCellulose10 μm (nom)Cleanablemetal mesh40 μm0 1 - 30 937752Q 937753Q 937788Q 937789Q 937720 9378212 1-60 937751Q 937754Q 937787Q 937790Q 937721 9378203 1 - 90 937750Q 937755Q 937786Q 937791Q 937722 9378194 1 - 120 937749Q 937756Q 937785Q 937792Q 937723 9378186 2 - 170 937747Q 937758Q 937783Q 937794Q 937725 9378167 2 - 230 937746Q 937759Q 937782Q 937795Q 937726 937815LEIF ® REPLACEMENT ELEMENTSElement HousingEcoglass IIIlength size 02QL 05QL 10QL 20QL0 1 - 30 937822Q 937885Q 937884Q 937883Q2 1-60 937823Q 937880Q 937881Q 937882Q3 1 - 90 937824Q 937879Q 937878Q 937877Q4 1 - 120 937825Q 937850Q 937851Q 937876Q6 2 - 170 937827Q 937848Q 937853Q 937874Q7 2 - 230 937828Q 937847Q 937854Q 937873QSPARE PARTSSeal kitCODESeal material GA0-4 GA6-7Nitrile 2049010009 2049010010Fluoroelastomer 2049010031 2049010032Neoprene 2049010038 2049010039Please note the bolded options reflect standard options with reduced lead-time.171Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGAH SeriesMedium Pressure <strong>Filter</strong>sMax. 500 l/min. 25 barIn-line solution for astraight pipelinePre-filtration by magnet column anda full-flow bypass with low hysteresis.Contamination-proof in-out filterprinciple. In- and outlet configurationallows integration in a straight pipeline.Nominal flow rate up to 500 l/min.Highly customizable for differentapplications.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Industrial gearboxes• Wind turbines• Stone crushers• Bypass and off-line filtration• Designed for hydraulic andlube applicationswww.parkerhfde.com172Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationAssembly:In-line filterMaximum operating pressure:25 barNominal flow rate (30 cSt):500 l/min (30 m 3 /h)Connections:Flanges SAE 3” 3000-MSeal material:Nitrile, optionally Fluoroelastomer or NeopreneOperating temperature:-40°C...+100°C with Nitrile seals, -20°C...+120°C withFluoroelastomer seals. For other temperatures consultParker Filtration.Housing material:AluminiumWeight:BGAH 3-400: 21 kgBGAH 3-500: 28 kgBypass setting:Opening pressure standard 1.5 bar, optionally 0.8 bar,2.0 bar or blocked bypassFiltration materials:• Ecoglass for LEIF® element with reusable metalelement sleeve. LEIF® contributes to ISO14001.• Glassfibre Microglass III• Resin impregnated cellulose paper 10μm nominal• Cleanable metal meshMagnetic pack:StandardDifferential pressure indicators:Visual or Visual-electrical indicatorSetting 1.2 bar (for 2.0 bar and 1.5 bar bypass)or 0.7 bar (for 0.8 bar bypass)Fluid compatibility:Suitable for use with regular hydraulic and lubricationoils. For other fluids consult Parker Filtration.Type A BBGAH 3-400 550 400BGAH 3-500 740 590173Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Visual Indicator - Mounted with couplings to filter housingCode (0.7 bar setting)FMUDABBAXXXLCode (1.2 bar setting)FMUDAEBAXXXLElectrical Indicator - Mounted with couplings to filter housingCode (0.7 bar setting and NO type switch)FMUEBBBAXXXLCode (1.2 bar setting and NO type switch)FMUEBEBAXXXLElectric rating120Vac/12VA or 100Vdc/10WElectrical connectionAMP terminal 6.3. x 0.8 with plugged cable glandProtectionIP65Switch typeNO (NC on request)174Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGAH SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStBGAH housingFlow [m 3 /h]0 3 6 9 12 15 18 21 24 27 30 33 36BGAH 3-400 elements (Length 11)BGAH 3-500 elements (Length 12)Flow [m 3 /h]0 3 6 9 12 15 18 21 24 27 30 33 36Flow [m 3 /h]0 3 6 9 12 15 18 21 24 27 30 33 36175Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGAH SeriesMedium Pressure <strong>Filter</strong>sProduct Description for BGAHComplete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8Table 1FILTER TYPEModelCODEMedium pressure filter, aluminiumBGAHTable 2FILTER SIZEHousing size - element lengthCODE3-400 113-500 12Table 3DEGREE OF FILTRATIONElement typeCODEMicroglass IIIGlassfibre 2 μm02QGlassfibre 5 μm05QGlassfibre 10 μm10QGlassfibre 20 μm20QLEIF ® elementsGlassfibre 2 μm02QLGlassfibre 5 μm05QLGlassfibre 10 μm10QLGlassfibre 20 μm20QLOther mediasCellulose 10 μm (nom)10CCleanable metal mesh 40 μm040WTable 4SEAL TYPESeal materialCODENitrileBFluoroelastomerVNeopreneNTable 5INDICATORSOptionsCODEVisual indicator on right*D8Visual indicator on left*D9Visual-electrical indicator on right*E9Visual-electrical indicator on left*EABoth indicator ports pluggedP2* Indicator ports on other side machined and plugged.Table 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE0.8 bar/0.7 bar B1.5 bar/1.2 bar E2.0 bar/1.2 bar HNo/NoXTable 7FILTER CONNECTIONSPort sizeCODESAE flange 3”-3000MR48Table 8OPTIONSOptionsCODEWith bypass and magnets 1No bypass, with magnets 2With bypass, no magnets 5No bypass, no magnets 6176Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
CONVENTIONAL TYPE REPLACEMENT ELEMENTS WITH NITRILE SEALSElementlengthHousingsizeMicroglass III02Q 05Q 10Q 20QCellulose10 μm (nom)Cleanablemetal mesh40 μm11 3-400 937742Q 937763Q 937778Q 937799Q 937728 93781312 3-500 937741Q 937764Q 937777Q 937800Q 937729 937812LEIF ® REPLACEMENT ELEMENTSElement HousingEcoglass IIIlength size 02QL 05QL 10QL 20QL11 3-400 937832Q 937843Q 937858Q 937869Q12 3-500 937833Q 937842Q 937859Q 937868QSPARE PARTSSeal kitCODESeal materialNitrile 2049010000Fluoroelastomer 2049010055Neoprene 2049010034Please note the bolded options reflect standard options with reduced lead-time.177Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGLS SeriesLow Pressure <strong>Filter</strong>sMax. 2000 l/min. 10 barHeavy duty in-linefilter solutionUpper housing aluminium and lowerhousing steel allows low weightcombined to high capacity. Magneticpre-filtration and nominal flow up to2000 l/min.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Lubrication systems• Wind turbines• <strong>Hydraulic</strong> presses• Large industrial gearboxeswww.parkerhfde.com178Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationAssembly:In-line filterMaximum operating pressure:10 barNominal flow rate (30 cSt):2000 l/min (120 m 3 /h)Connections:Flanges SAE 3” 3000-MSeal material:Nitrile, optionally FluoroelastomerOperating temperature:-40°C...+100°C with Nitrile seals, -20°C...+120°C withFluoroelastomer seals. For other temperatures consultParker Filtration.Housing material:Upper housing aluminium, lower housing steelWeight:BGLS 4-1000: 56 kgBGLS 4-1500: 65 kgBGLS 4-2000: 75 kgBypass setting:Opening pressure standard 1.5 bar, optionally 0.8 bar,2.0 bar or blocked bypassFiltration materials:• Ecoglass for LEIF® element with reusable metalelement sleeve. LEIF® contributes to ISO14001.• Glassfibre Microglass III• Resin impregnated cellulose paper 10μm nominal• Cleanable metal meshMagnetic pack:StandardDifferential pressure indicators:Visual or Visual-electrical indicator, see page 16.Setting 1.2 bar (for 2.0 bar and 1.5 bar bypass) or 0.7 bar(for 0.8 bar bypass).Fluid compatibility:Suitable for use with regular hydraulic and lubricationoils. For other fluids consult Parker Filtration.Indicator details, see page 16.Type H L F1000 975 635 7351500 1255 915 10152000 1520 1180 1280179Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
BGLS SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStBGLS housingBGLS 4-1000 elements (Length 15)Flow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120Flow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60BGLS 4-1500 elements (Length 16)BGLS 4-2000 elements (Length 17)Flow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60 72 78 78 84 90Flow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120CONVENTIONAL TYPE REPLACEMENT ELEMENTS WITH NITRILE SEALSElementlengthHousingsizeMicroglass III02Q 05Q 10Q 20QCellulose10 μm (nom)Cleanablemetal mesh40 μm15 4-1000 937738Q 937767Q 937774Q 937803Q 937732 93780916 4-1500 937737Q 937768Q 937773Q 937804Q 937733 93780817 4-2000 937736Q 937769Q 937772Q 937805Q 937734 937807180Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for BGLSComplete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7Table 8Table 1FILTER TYPEModelMedium pressure filter, upper housingaluminium, lower housing steelTable 2Table 4SEAL TYPESeal materialNitrileFluoroelastomerCODEBGLSFILTER SIZEHousing size - element lengthCODE4-1000 154-1500 164-2000 17Table 3DEGREE OF FILTRATIONElement typeCODEMicroglass IIIGlassfibre 2 μm02QGlassfibre 5 μm05QGlassfibre 10 μm10QGlassfibre 20 μm20QLEIF ® elements (not available for length 17)Glassfibre 2 μm02QLGlassfibre 5 μm05QLGlassfibre 10 μm10QLGlassfibre 20 μm20QLOther mediasCellulose 10 μm (nom)10CCleanable metal mesh 40 μm040WCODEBVTable 5INDICATORSOptionsCODEVisual indicator on rightD6Visual indicator on leftD7Visual-electrical indicator on rightE7Visual-electrical indicator on leftE8Plugged indicator ports on rightPTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE0.8 bar/0.7 bar B1.5 bar/1.2 bar E2.0 bar/1.2 bar HNo/NoXTable 7FILTER CONNECTIONSPort size/outlet directionCODESAE flange 3”-3000M/front (0°)R48FSAE flange 3”-3000M/right (90°)R48RSAE flange 3”-3000M/back (180°)R48BSAE flange 3”-3000M/left (270°)R48LTable 8OPTIONSOptionsCODEWith bypass and magnets 1No bypass, with magnets 2With bypass, no magnets 5No bypass, no magnets 6LEIF ® REPLACEMENT ELEMENTSElement HousingEcoglass IIIlength size 02QL 05QL 10QL 20QL15 4-1000 937836Q 937839Q 937862Q 937865Q16 4-1500 937837Q 937838Q 937863Q 937864Q17 4-2000 NA NA NA N<strong>AS</strong>PARE PARTSSeal kitCODESeal materialNitrile 2049010023Please note the bolded options reflect standard options with reduced lead-time.181Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SF1040 SeriesLow Pressure <strong>Filter</strong>sMax. 1400 l/min. 10 barMulti-purpose filterfor gas and high flowfluid systemsStrong welded steel constructionhousing features DN80 or DN100connections. Several media optionsincluding PED 3 classified versions forgas applications. As options availablesafety filter to secure filtration evenin by pass situations, and differentialpressure indicator for accurateoperation control.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Lubricating oil filter for industrialsystems• Gas fine filter for combustionengines• Fuel oil filter for high flow systems• Large on line low-pressure filter forhydraulic systemswww.parkerhfde.com182Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationAssembly:In-line filter, vertical installation or optionallyhorizontal installation. Includes 2 elements.Maximum operating pressure:10 barNominal flow rate (30 cSt):1400 l/min (84 m 3 /h)Connections:Flanges DN80/PN16 or DN100/PN16Seal material:FluoroelastomerOperating temperature:-20°C...+120°C, with Fluoroelastomer seals,-20°C...+160°C with metal mesh elements andFluoroelastomer seals.Housing material:Steel or stainless steelWeight:100 kgBypass valve:Standard without bypass. Optionally opening pressure2.0 bar.Filtration materials:• Glassfibre Microglass III• Resin impregnated cellulose paper 15 μm nominal• Cleanable metal meshIndicator options:Visual, electrical or electronic indicator requires anindicator block. For details see indicator options tablein product description page and catalogue section 4.Fluid compatibility:Suitable for use with regular hydraulic and lubricationoils and fuel oils. For heavy fuel oil applications, pleasespecify option P2 (see table 8 in product description)which ensures that filters are delivered withdocumentation according PED 97/23/EC category II.Respectively for combustible gas applications, specifyoption P3 for PED category III. For other fluids consultParkerFiltration.Type A B C D E FDN80/PN16 753 160 153 932 868 440DN100/PN16 786 186 140 978 914 460183Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SF1040 SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStSF1040 DN80/PN16 housingSF1040 element pack (2 pcs)Flow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120Flow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120184Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for SF1040Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7Table 8Table 1FILTER TYPEModelCODESingle filterSF1040Stainless steel housingSFR1040Horizontal installationSFH1040Table 2FILTER SIZELength/elementsCODE2 elements housing 2Table 5INDICATORSOptionsNo indicator blockIndicator port pluggedVisual indicatorElectrical indicatorElectronic indicator (PNP/N.O.)Electronic indicator (NPN/N.O.)ATEX indicator PNP/N.O.CODENPM3T1F1F2X1Table 3DEGREE OF FILTRATIONElement typeMicroglass IIIGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmOther mediasCellulose 15 μm (nom)Cleanable metal mesh 35 μmCleanable metal mesh 60 μmCODE05Q10Q20Q015N035W060WTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE2.0 bar/1.5 bar HNo/NoXTable 7FILTER CONNECTIONSPort sizeCODEDN80 T-portD80TDN80 C-port (both ports to same direction) D80CDN100 T-portD100TTable 4SEAL TYPESeal materialCODEFluoroelastomerVREPLACEMENT ELEMENTSMedia codeOrder codeGlassfibreMicroglass III05Q939381Q10Q939382Q20Q939383QCellulose 15 μm (nom)015N 939384Cleanable metal mesh035W 939385060W 939386Table 8OPTIONSOptionsCODEWith bypass 1No bypass 2PED category 2P2PED category 3P3No mounting bracketsNBSecondary element 60 μmFIf several options are selected, please add the codes in order listed above.SPARE PARTSSeal kitCODESeal materialFluoroelastomer 916045044Secondary elementCODEWire mesh 60 μm 939377Please note the bolded options reflect standard options with reduced lead-time.185Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Eco130 SeriesMedium Pressure <strong>Filter</strong>sMax. 1400 l/min. 30 barModular systemfor industrialapplicationsHigh flow return filters for industrial useon hydraulic or lubrication systems.High flow and pressure up to 30 barin single units. Ability to bank multiplefilters together enables continuousfiltration during element changes.Coreless Ecoglass III elements.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Paper production plants• Steel mills• Aluminium mills• Industrial power packs• Lubrication systems• Power generationwww.parkerhfde.com186Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationAssembly:In-line filter as a single filter, a dual unit, a parallel unitor a filter system with L-bore selecting valve assembly(only one side in use). Vertical installation.Maximum operating pressure:Single filter: 30 barDual and parallel units and filter systems: 16 barNominal flow rate (30 cSt):Single filter: 1000 l/min (60 m 3 /h)Dual and parallel units and filter systems: 1400 l/min(84 m3/h)Connections:Single filter: Flanges SAE 2” 3000-M, SAE 2½” 3000-Mor with adaptor threads G1½ or G2.Dual units: Flanges SAE 3” 3000-M or with adaptorthreads G2.Parallel units and filter systems: DN80/PN16 orDN100/PN16.Seal material:Nitrile or optionally fluoroelastomerOperating temperature:-40°C...+100°C with Nitrile seals, -20°C...+120°C withFluoroelastomer seals. For other temperatures consultParker Filtration.Housing material:AluminiumWeight:See a table in dimension drawingBypass valve:Opening pressure 3.5 barFiltration materials:• Glassfibre Microglass III• Environmentally friendly Ecoglass III. No metalparts.• Cleanable metal meshIndicator options:For details see indicator options table on productdescription page and catalogue section 4.Differential pressure indicators:Visual indicator always included to each column,setting 2.5 bar. Optional electrical or electronicindicators to be mounted on lower indicator port.Fluid compatibility:Suitable for use with regular hydraulic and lubricationoils. For other fluids consult Parker Filtration.Single Assemblies 130MConnection optionsBody flange SAE 2” 3000-MSAE 2½” 3000-MAdaptor flangeG1½G2SAE 3” 3000-M (90° elbow)Weights (kg) Length 2 Length 3Single 25 33Dual D2 70 86Parallel P2 75 90System S2 110 130System S4 205 235System S6 260 310System S8 340 705Type ALength 2 650Length 3 1210187Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Eco130 SeriesMedium Pressure <strong>Filter</strong>sDual System 130DConnection optionsBody flange SAE 3” 3000-MAdaptor flange threadG2Type ALength 2 780Length 3 1340Parallel System 130NType ALength 2 780Length 3 1340188Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Indicator M3130S System 1+1unitsT-modelType ALength 2 780Length 3 134090°Indicator M3130S System 2+2unitsT-modelType ALength 2 780Length 3 134090°189Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Indicator M3130S System 3+3unitsT-modelType ALength 2 780Length 3 134090°Indicator M3130S System 4+4unitsT-modelType ALength 2 780Length 3 134090°190Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Indicator M3130S SystemL-modelType ALength 2 780Length 3 134090°Indicator M3130S SystemC-modelType ALength 2 780Length 3 134090°191Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Eco130 SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.8 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cSt130M single unit housings130S3 system housings with DN100Flow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60Flow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96Length 2 elementsLength 3 elementsFlow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60Flow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60REPLACEMENT ECO-ELEMENTS WITH NITRILESEALSMedia Length 2 Length 302QE 938721Q 938725Q05QE 938722Q 938726Q10QE 938723Q 938727Q20QE 938724Q 938728QElements with fluoroelastomer seals: ask order codes from Parker Filtration.REPLACEMENT ELEMENTS WITH NITRILE SEALSMicroglass III Length 2 Length 302Q 938733Q 938737Q05Q 938734Q 938738Q10Q 938735Q 938739Q20Q 938736Q 938740QWire mesh035W 938760 938765060W 938761 938766192Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for Eco130Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8Table 1Table 5FILTER TYPEINDICATORSModelCODEOptionsCODESingle unit130 MVisual indicatorM3Dual unit130 DElectrical indicatorT1Parallel unit130 NElectronic indicator (PNP/N.O.)F1System130 SElectronic indicator (NPN/N.O.)F2Table 2FILTER TYPEElement lengthCODELength 2 2Length 3 3Table 3DEGREE OF FILTRATIONElement typeCODEEcoglass IIIGlassfibre 2 μm02QEGlassfibre 5 μm05QEGlassfibre 10 μm10QEGlassfibre 20 μm20QE<strong>Filter</strong>s with Microglass III and wire mesh elements available by request.Table 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE3.5 bar/2.5 bar KTable 7FILTER CONNECTIONSPort size <strong>Filter</strong> type CODEG1½ 130M G24G2 130M, 130D G32SAE flange 2”-3000M 130M R32SAE flange 2½”-3000M 130M R40SAE flange 3”-3000M 130D R48DN80/PN16 130N, 130S D80DN100/PN16 130N, 130S D100Table 4SEAL TYPESeal materialNitrileFluoroelastomerSPARE PARTSSeal kitCODESeal materialNitrile 918045059Fluoroelastomer 918045076ECO adapter130M2 918042078130M3 918042077CODEBVTable 8OPTIONSOptionsCODEStandard single 1Dual 2 units 21Dual 3 units 31Parallel 1+1 units 21Parallel 2+2 units 41T-system 1+1 units 21T-system 2+2 units 41T-system 3+3 units 61T-system 4+4 units 81L-system 1+1 units 27L-system 2+2 units 47L-system 3+3 units 67L-system 4+4 units 87Please note the bolded options reflect standard options with reduced lead-time.130S Valve Seal KitPart Number Description918045062 NITRILE SEAL KIT 130S VALVE193Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2145Duplex <strong>Filter</strong>sMax. 80 l/min. 30 barDuplex safety forfuel, lube andhydraulic systemsDuplex operation for security andcontinuous flow. Several filtrationmedia options include environmentallyfriendly Ecoglass III elements andallows wide selection of applications.Integrated differential pressure switchconnection with shut off valve. Sturdycast iron housing with pressure ratingup to 30 bar. Block mounting available.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Diesel engine fuel systems• Industrial lube oil systems• Industrial medium pressurehydraulic systemswww.parkerhfde.com194Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:Change-over valve with open center position. Handlelocking device for both end positions. Vent valves withsecured outlets on both sides. Integrated indicator portwith test connections.Maximum operating pressure:30 barConnections:Two sets of threads G¾ or M26 x 1.5. Connections onflange are plugged with steel plug.Seal material:FluoroelastomerOperating temperature:-20°C...+120°C with Fluoroelastomer seals,-20°C...+160°C with metal meash elements andFluoroelastomer seals.Housing material:Cast iron (GJS)Weight:15 kgNominal flow rate (30 cSt):80 l/min (4,8 m 3 /h)Bypass valve:Standard without bypass, optional opening pressure3.5 barFiltration materials:• Glassfibre Microglass III• Environmentally friendly Ecoglass III. No metalparts. Ecoglass III contributes to ISO14001.• Cleanable metall mesh• Resin impregnated fine cellulose paper 10 μmnominalDifferential pressure indicators:Integrated indicator port. <strong>Filter</strong> can be equipped withvisual, electrical or electronic differential pressureindicator. Setting 2.5 bar, other settings available. Fordetails see indicator options table on productdescription page and catalogue section 4.Fluid compatibility:Suitable for use with regular hydraulic and lubricationoils & light fuel oils (diesel). For heavy fuel oilapplications, please specify option P2 (see table 8 inproduct description) which ensures that filters aredelivered with documentation according PED 97/23/EC category II. For other fluids consult ParkerFiltration.195Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2145Pressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStDF2145 housingDF2145 length 2 elementsFlow [m 3 /h]0 1 2 3 4 5 6 7 8Flow [m 3 /h]0 1 2 3 4 5 6 7 8REPLACEMENT ELEMENTS WITH FLUOROEL<strong>AS</strong>TOMER SEALSMedia codeOrder codeGlassfibre Microglass III Ecoglass III05Q/05QE 939011Q 939014Q10Q/10QE 939012Q 939015Q20Q/20QE 939013Q 939016QCellulose (Eco)NE10 939017Cleanable metal mesh035W 939018060W 939019196Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DF2145Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filterDF2145Table 2FILTER SIZEElement lengthCODELength 2 2Table 5INDICATORSOptionsIndicator port pluggedVisual indicatorElectrical indicatorElectronic indicator (PNP/N.O.)Electronic indicator (NPN/N.O.)CODEPM3T1F1F2Table 3DEGREE OF FILTRATIONElement typeMicroglass IIIGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmEcoglass IIIGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmOther mediasCellulose 10 μm (nom) ECOCleanable metal mesh 35 μmCleanable metal mesh 60 μmTable 4SEAL TYPESeal materialFluoroelastomerCODE05Q10Q20Q05QE10QE20QE10NE035W060WCODEVTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE3.5 bar/2.5 bar KNo/NoXTable 7FILTER CONNECTIONSPort sizeCODEG¾G12M26x1.5M26Table 8OPTIONSOptionsCODEWith bypass 1No bypass 2PED category 2P2If several options are selected, please add the codes in order listed above.SPARE PARTSSeal kits (fluoroelastomer)CODEComplete seal kit916045088(includes also valve spool seals)Service seal kit (includes seals for bowl, 916045093drain and Eco-adapter)ECO adapterFor Ecoglass III and 10NE elements 911042096Please note the bolded options reflect standard options with reduced lead-time.197Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DFBO SeriesDuplex Fuel <strong>Filter</strong>sMax. 90 l/min. 10 barContinuous dieselfiltration in Marineapplications withDFBO duplex filter:The new DFBO duplex filter bringsRacor ® FBO filters to engine roomenvironment. The new duplex designensures that fuel is efficiently filtered allthe time. The cast iron head and steelbowls mean that it can be used inMarine applications.The DFBO comes with two bowllengths allowing diesel flows up to90 l/min. Depending on the elementsinside the unit can be used as aprefilter, a water separator/particlefilter or a water absorptive filter. Easyservice, no special tools are required.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Fuel systems on dieselengines• Marine fuel docks• Diesel fuel dispensingsystemwww.parkerhfde.com198Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:Change-over valve with open center position. Lockingdevice for both end positions and centre position.Manual vent valves and drain valves.Maximum operating pressure:10 barConnections:Threaded ports M30 x 1,5 or optionally G1” facingdownwards.Seal material:FluoroelastomerOperating temperature:0°C...+80°C, for other temperatures consult ParkerFiltration.Housing material:Head material cast iron, bowl material steel.Weight:40 kgNominal flow rate (3 cSt):DFBO-10: 70 l/min (4.2 m 3 /h)DFBO-14: 90 l/min (5.4 m 3 /h)Bypass valve:No bypass<strong>Filter</strong> elements:<strong>Filter</strong> separator elements with micron ratings 10 μmand 25 μm remove water and contaminants from fuelstreams. Other types of FBO elements and other ratingsare available, see replacement element table on thefollowing page.Fluid compatibility:Suitable for use with diesel fuel, jet fuel, gasoline,kerosene, JP4, JP5 and JP8199Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DFBOComplete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filterDFBOTable 2FILTER SIZEElement lengthCODELength 10” 10Length 14” 14Table 3MICRON RATING<strong>Filter</strong> separator elementCODERating 10 μm10FSRating 25 μm25FSWithout elementsXXXTable 5INDICATORSOptionsCODEIndicator port pluggedPVacum gauge in outlet sideATable 6INDICATOR SETTINGOptionsCODENo indicatorX1,0 bar (15 psi) FTable 7FILTER CONNECTIONSPort sizeCODEM30 x 1,5 connections downMD30G1” - connections down GD16Table 4SEAL TYPESeal materialFluoroelastomerCODEVTable 8OPTIONSOptionsCODEStandard 1Sight level glass in bowlSGWater level probe in bowlWPMarine assemblyMAMax flow rate [l/min] withOne side in useBoth sides in usemarine diesel oil at 3 cSt10 micron 25 micron 10 micron 25 micronDFBO-10 10FS 25FS 10FS 25FSVacuum sidePressure side4570DFBO-14 10FS 25FS 10FS 25FSVacuum sidePressure side60904570609060100801306010080130All FBO elements can be used in DFBO filter. Select your replacement elements from the table below.Element Micron <strong>Filter</strong> Separator Pre-<strong>Filter</strong> Water Absorber1 FBO 60327 FBO 60330 FBO 603335 FBO 60328 FBO 60331 FBO 60334FBO-1010 FBO 60353 FBO 60354 FBO 6035525 FBO 60329 FBO 60332 FBO 603351 FBO 60336 FBO 60339 FBO 603425 FBO 60337 FBO 60340 FBO 60343FBO-1410 FBO 60356 FBO 60357 FBO 6035825 FBO 60338 FBO 60341 FBO 60344200Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF40Duplex <strong>Filter</strong>sMax. 200 l/min. 40 barCast iron duplexfilter for Marineapplications:The new DF40 duplex filter gives youextra flexibility in installation becauseit can be serviced from the top or thebottom. The durable cast iron housingmakes it an especially good fit forengine room applications.The DF40 with flow up to 200 l/minand pressure up to 40 bar containsEco elements which help to savethe environment and reduce thecustomer’s disposal costs as nometal parts are included. This filteralso disposes of a double indicatorport and test connections which canbe isolated with shut-off valves forpossible assembly and maintenance.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Fuel filter for diesel engines upto 10 MW• Lubrication filter for gearboxesand propulsion systems• Medium pressure duplex filterin hydraulic systems• In-line return duplex filter inhydraulic systemswww.parkerhfde.com202Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:Change-over valve with open center position. Lockingdevice for both end positions. Element change ispossible by opening either the top cover or the bowlin the bottom. Safety guards ensure that pressure isreleased prior opening the filter.Maximum operating pressure:40 barConnections:Flanges SAE 1½” 3000-M as standard. Optionalthread connections G1½ and G1¼ available with flangeadapters.Seal material:FluoroelastomerOperating temperature:-20°C...+120°C with Fluoroelastomer seals,-20°C...+160°C with metal mesh elements andFluoroelastomer seals.Housing material:Cast iron (GJS)Weight:52 kgNominal flow rate (30 cSt):200 l/min (12 m 3 /h)Bypass valve:Standard without bypass, optional opening pressure3.5 barIndicators:Integrated indicator port. <strong>Filter</strong> can be equipped withvisual, electrical or electronic differential pressureindicator. Setting 2.5 bar, other settings available.Additional indicator port and isolation valves whichalso enable indicator testing are available by request.For details see indicator options table on productdescription page and catalogue section 4.<strong>Filter</strong> elements:• Environmentally friendly Ecoglass III elements,micron ratings(abs): 2 μm, 5 μm, 10 μm and 20 μm.Ecoglass III elements contribute to ISO14001 becausethey do not include metal parts.• Glassfibre Microglass III elements, micronratings(abs): 2 μm, 5 μm, 10 μm and 20 μm.• Cleanable metal mesh elements, micron ratings(abs):35 μm and 60 μmFluid compatibility:Suitable for use with regular hydraulic and lubricationoils & light fuel oils. For heavy fuel oils and other fluidsconsult Parker Filtration.203Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF40Pressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStDF40 housingDF40 elementsFlow [m 3 /h]0 3 6 9 12 15 18Flow [m 3 /h]0 3 6 9 12 15 18REPLACEMENT ELEMENTS WITH FLUOROEL<strong>AS</strong>TOMER SEALSMedia codeOrder codeGlassfibre Microglass III Ecoglass III02Q/02QE 939200Q 939204Q05Q/05QE 939201Q 939205Q10Q/10QE 939202Q 939206Q20Q/20QE 939203Q 939207QCleanable metal mesh035W 939208060W 939209SPARE PARTSSeal kit (fluoroelastomer) CODEFor spool valve 939215Seals needed in element service are included in Parker originalreplacement element package.204Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DF40Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filterDF40Table 2FILTER SIZEElement lengthCODELength 1 1Table 5INDICATORSOptionsIndicator port pluggedVisual indicatorElectrical indicatorElectronic indicator (PNP/N.O.)Electronic indicator (NPN/N.O.)CODEPM3T1F1F2Table 3DEGREE OF FILTRATIONElement typeMicroglass IIIGlassfibre 2 μmGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmEcoglass IIIGlassfibre 2 μmGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmOther mediasCleanable metal mesh 35 μmCleanable metal mesh 60 μmTable 4SEAL TYPESeal materialFluoroelastomerCODE02Q05Q10Q20Q02QE05QE10QE20QE035W060WCODEVTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE3.5 bar/2.5 bar KNo/NoXTable 7FILTER CONNECTIONSPort sizeCODESAE flange 1½” 3000-MR24G 1¼ with adaptorG20G 1½ with adaptorG24Table 8OPTIONSOptionsCODEWith bypass 1No bypass 2No safety covers, with bypassN1No safety covers, no bypassN2HFO use, no bypass, max. pressure 30 bar H2Please note the bolded options reflect standard options with reduced lead-time.205Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2089Duplex <strong>Filter</strong>sMax. 350 l/min. 40 barHeavy duty duplexoperationCast iron housing with pressure ratingup to 40 bar features in-to out flow tokeep the particles away even duringthe filter change. Differential pressureswitch mounted on the filter for easyaccess. Several media options allowlube, fuel and hydraulic use – prefiltrationwith magnets as option.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Propulsion system lube oilfilter• Heavy fuel oil safety filter• Medium pressure hydraulicsystemswww.parkerhfde.com206Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:One reservoir can be closed for service, verticalinstallation.Connections:Square flanges with port size 60 mm. Standard deliveryincludes blind counter flanges. Optionally availablewith SAE 2”-3000M flange adapters.Maximum operating pressure:40 barSeal material:FluoroelastomerOperating temperature:-20°C...+120°C with Fluoroelastomer seals,-20°C...+160°C with metal mesh elements andFluoroelastomer seals.Housing material:Cast iron (GJS)Weight:65 kgNominal flow rate (30 cSt):350 l/min (21 m 3 /h)Bypass valve:Standard bypass opening pressure 2.0 bar, optionalopening pressure 1.6 bar or blocked bypassIndicator options:Visual, electrical or electronic indicator requires anindicator block. For details see indicator options tablein product description page and catalogue section 4.Filtration materials:• Glassfibre Microglass III• Cleanable metal meshFluid compatibility:Suitable for use with regular hydraulic and lubricationoils and fuel oils. <strong>Filter</strong>s are delivered withdocumentation according PED 97/23/EC category II(required for heavy fuel oils). For other fluids consultParker Filtration.M12, depth 27mmTypeAW/O flange/adapter 215With X60 flange 232With R32 adapter 245207Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2089Pressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStDF2089 housingFlow [m 3 /h]0 3 6 9 12 15 18 21 24 27 30DF2089 elements/one sideDF2089 elements/both sidesFlow [m 3 /h]0 3 6 9 12 15 18 21 24 27 30Flow [m 3 /h]0 3 6 9 12 15 18 21 24 27 30208Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DF2089Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filterDF2089Table 2FILTER SIZEElement lengthCODELength 1 1Table 5INDICATORSOptionsNo indicator blockIndicator port pluggedVisual indicatorElectrical indicatorElectronic indicator (PNP/N.O.)Electronic indicator (NPN/N.O.)CODENPM3T1F1F2Table 3DEGREE OF FILTRATIONElement typeMicroglass IIIGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmOther mediasCleanable metal mesh 35 μmCleanable metal mesh 60 μmTable 4SEAL TYPESeal materialFluoroelastomerCODE05Q10Q20Q035W060WCODEVTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE1.6 bar/1.0 bar F2.0 bar/1.5 bar HNo/NoXTable 7FILTER CONNECTIONSPort sizeCODESquare flange 60 mmX60Flange adapter SAE 2”-3000MR32Table 8OPTIONSOptionsCODEWith bypass, no magnets 1No bypass, no magnets 2With bypass and magnets 3No bypass, with magnets 4REPLACEMENT ELEMENTS WITH FLUOROEL<strong>AS</strong>TOMER SEALSMedia codeOrder codeGlassfibreMicroglass III05Q938364Q10Q938075Q20Q938005QCleanable metal mesh035W 939184060W 939185SPARE PARTSSeal kitCODESeal materialFluoroelastomer 916045077Please note the bolded options reflect standard options with reduced lead-time.209Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2110 SeriesDuplex <strong>Filter</strong>sMax. 1200 l/min. 20 barHeavy dutyperformanceHigh dirt holding capacity yet lowpressure drop. Heavy duty cast ironhousing and several media optionsmeans a multitude of suitableapplications. Maximum flow rate upto 1200 l/min and extended housingavailable for high viscocity oils andlonger service intervals. DN80 PN 25connection.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Marine gear lubricatingsystems• Propulsion systems• Diesel engine lubricatingsystems• Heavy fuel oil safety filterwww.parkerhfde.com210Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:One reservoir can be closed for service, verticalinstallation.Connections:Standard flange size DN80/PN25. Delivered withoutcounter flanges.Maximum operating pressure:20 barSeal material:FluoroelastomerOperating temperature:-20°C...+120°C with Fluoroelastomer seals,-20°C...+160°C with metal mesh elements andFluoroelastomer seals.Housing material:Cast iron (GJS)Weight:Length 1: 200 kgLength 2: 240 kgNominal flow rate (30 cSt):Length 1: 1000 l/min (60 m 3 /h)Length 2: 1200 l/min (72 m 3 /h)Bypass valve:Standard bypass opening pressure 2.0 bar, optionalopening pressure 3.0 bar or blocked bypassIndicator options:Visual, electrical or electronic indicator requires anindicator block. For details see indicator options tablein product description page and catalogue section 4.Filtration materials:• Glassfibre Microglass III• Cleanable metal meshFluid compatibility:Suitable for use with regular hydraulic and lubricationoils and fuel oils. For heavy fuel oil applications, pleasespecify option P2 (see table 8 in product description)which ensures that filters are delivered withdocumentation according PED 97/23/EC category II.For other fluids consult Parker Filtration.Type A B C DLength 1 126 256 620 500Length 2 386 516 880 700211Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2110 SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStDF2110 housingFlow [m 3 /h]0 12 24 36 48 60 72 84 96Length 1 elements/one sideLength 1 elements/both sidesFlow [m 3 /h]0 12 24 36 48 60 72 84 96Flow [m 3 /h]0 12 24 36 48 60 72 84 96Length 2 elements/one sideLength 2 elements/both sidesFlow [m 3 /h]0 12 24 36 48 60 72 84 96Flow [m 3 /h]0 12 24 36 48 60 72 84 96212Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DF2110Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filterDF2110Table 2FILTER SIZEElement lengthCODELength 1 1Length 2 2Table 5INDICATORSOptionsNo indicator blockIndicator port pluggedVisual indicatorElectrical indicatorElectronic indicator (PNP/N.O.)Electronic indicator (NPN/N.O.)CODENPM3T1F1F2Table 3DEGREE OF FILTRATIONElement typeMicroglass IIIGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmOther mediasCleanable metal mesh 35 μmCleanable metal mesh 60 μmTable 4SEAL TYPESeal materialFluoroelastomerCODE05Q10Q20Q035W060WCODEVTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE2.0 bar/1.5 bar H3.0 bar/2.5 bar JNo/NoXTable 7FILTER CONNECTIONSPort sizeCODEFlange DN80D80Table 8OPTIONSOptionsCODEWith bypass 1No bypass 2PED category 2P2If several options are selected, please add the codes in order listed above.REPLACEMENT ELEMENTS WITH FLUOROEL<strong>AS</strong>TOMER SEALSMedia code Order code for Length1 Order code for Length2Glassfibre Microglass III Microglass III05Q 938365Q 938367Q10Q 938373Q 938093Q20Q 938366Q 938368QCleanable metal mesh035W 939186 939188060W 939187 939189SPARE PARTSSeal kitCODESeal materialFluoroelastomer 916045078Please note the bolded options reflect standard options with reduced lead-time.213Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2050 SeriesDuplex <strong>Filter</strong>sMax. 1000 l/min. 20 barHeavy dutyperformanceHigh dirt holding capacity yet lowpressure drop. Heavy duty cast ironhousing and same elements as inDF2035 means safety and continuityin your applications. Maximum flowrate up to 1000 l/min. DN80 PN 25connection.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Marine gear lubricatingsystems• Propulsion systems• Diesel engine lubricatingsystems• Heavy fuel oil safety filterwww.parkerhfde.com214Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:One reservoir can be closed for service, verticalinstallation. Length 2 includes 2 elements/side andlength 3 includes 3 elements/side.Connections:Standard flange size DN80/PN25. Delivered withoutcounter flanges.Maximum operating pressure:20 barSeal material:FluoroelastomerOperating temperature:-20°C...+120°C with Fluoroelastomer seals,-20°C...+160°C with metal mesh elements andFluoroelastomer seals.Housing material:Cast iron (GJS)Weight:Length 2: 200 kgLength 3: 240 kgNominal flow rate (30 cSt):Length 2: 900 l/min (54 m 3 /h)Length 3: 10000 l/min (60 m 3 /h)Bypass valve:Standard with blocked bypass. Optional openingpressure 2.0 barIndicator options:Visual, electrical or electronic indicator requires anindicator block. For details see indicator options tablein product description page and catalogue section 4.Filtration materials:• Resin impregnated heavy duty cellulose paper15 μm nominal• Glassfibre Microglass III• Cleanable metal meshSecondary filter:• Filtration material cleanable wire mesh• Filtration degree 60 μmFluid compatibility:Suitable for use with regular hydraulic and lubricationoils and fuel oils. For heavy fuel oil applications, pleasespecify option P2 (see table 8 in product description)which ensures that filters are delivered withdocumentation according PED 97/23/EC category II.For other fluids consult Parker Filtration.Type A B C DLength 2 126 256 620 500Length 3 386 516 880 700215Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2050 SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStDF2050 housingFlow [m 3 /h]0 12 24 36 48 60 72 84 96Length 2 element pack/one sideLength 2 element pack/both sidesFlow [m 3 /h]0 12 24 36 48 60 72 84 96Flow [m 3 /h]0 12 24 36 48 60 72 84 96Length 3 element pack/one sideLength 3 element pack/both sidesFlow [m 3 /h]0 12 24 36 48 60 72 84 96Flow [m 3 /h]0 12 24 36 48 60 72 84 96216Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DF2050Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filterDF2050Table 2FILTER SIZELength/elementsCODE2 elements/side 23 elements/side 3Table 5INDICATORSOptionsNo indicator blockIndicator port pluggedVisual indicatorElectrical indicatorElectronic indicator (PNP/N.O.)Electronic indicator (NPN/N.O.)CODENPM3T1F1F2Table 3DEGREE OF FILTRATIONElement typeMicroglass IIIGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmOther mediasCellulose 15 μm (nom)Cleanable metal mesh 35 μmCleanable metal mesh 60 μmTable 4SEAL TYPESeal materialFluoroelastomerCODE05Q10Q20Q015N035W060WCODEVTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE2.0 bar/1.5 bar HNo/NoXTable 7FILTER CONNECTIONSPort sizeCODEFlange DN80D80Table 8OPTIONSOptionsCODEWith bypass 1No bypass 2PED category 2P2If several options are selected, please add the codes in order listed above.REPLACEMENT ELEMENTS WITH FLUOROEL<strong>AS</strong>TOMER SEALSMedia codeOrder codeGlassfibreMicroglass III05Q939401Q10Q939402Q20Q939403QCellulose 15 μm (nom)015N 939404Cleanable metal mesh035W 939405060W 939406SPARE PARTSSecondary filter element (60 μm) CODELength 2 939416Length 3 939417Seal kitCODESeal materialFluoroelastomer 916045076Please note the bolded options reflect standard options with reduced lead-time.217Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2035 SeriesDuplex <strong>Filter</strong>sMax. 600 l/min. 8 barLight weight,high capacitySeveral media options and high dirtholding capacity – up to three filterelements per reservoir. Aluminiumhousing offers light weight combinedto considerably high capacity. Twodifferent housing options.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Industrial gear systems• Diesel engine lubricatingsystemswww.parkerhfde.com218Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:One reservoir can be closed for service, verticalinstallation. Length 2 includes 2 elements/side andlength 3 includes 3 elements/side.Connections:Square flanges with DN65/PN16 dimensioning.Standard delivery includes blind counter flangesaccording DIN 2527.Maximum operating pressure:8barSeal material:FluoroelastomerOperating temperature:-20°C...+120°C with Fluoroelastomer seals. For othertemperatures consult Parker Filtratio.Housing material:AluminiumWeight:Length 2: 49.0 kgLength 3: 62.5 kgMaximum flow rate:600 l/min (36 m 3 /h)Indicator options:Visual, electrical or electronic indicator requires anindicator block. For details see indicator options tablein product description page and catalogue section 4.Primary filter:- Length 2: two filter elements per reservoir- Length 3: three filter elements per reservoir- Filtration materials• Resin impregnated heavy duty cellulose paper15μm nominal• Glassfibre Microglass III• Cleanable metal meshSecondary filter:- Filtration material cleanable metal mesh- Filtration degree 60μmFluid compatibility:Suitable for use with regular hydraulic and lubricationoils. For other fluids consult Parker Filtration.Type ALength 2 590Length 3 775219Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2035 SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStDF2035 housingFlow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60Length 2 element pack (2 pcs)/one side in useLength 2 element pack (2 + 2 pcs)/both sides in useFlow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60Flow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60Length 3 element pack (3 pcs)/one side in useLength 3 element pack (3 + 3 pcs)/both sides in useFlow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60Flow [m 3 /h]0 6 12 18 24 30 36 42 48 54 60220Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DF2035Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filterDF2035Table 2FILTER SIZELength/elementsCODE2 elements/side 23 elements/side 3Table 5INDICATORSOptionsNo indicator blockIndicator port pluggedVisual indicatorElectrical indicatorElectronic indicator (PNP/N.O.)Electronic indicator (NPN/N.O.)CODENPM3T1F1F2Table 3DEGREE OF FILTRATIONElement typeMicroglass IIIGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmOther mediasCellulose 15 μm (nom)Cleanable metal mesh 35 μmCleanable metal mesh 60 μmTable 4SEAL TYPESeal materialFluoroelastomerCODE05Q10Q20Q015N035W060WCODEVTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE2.0 bar/1.5 bar HTable 7FILTER CONNECTIONSPort sizeCODESquare flange ref. DN65D65Table 8OPTIONSOptionsCODEWith bypass 1REPLACEMENT ELEMENTS WITH FLUOROEL<strong>AS</strong>TOMER SEALSMedia codeOrder codeGlassfibreMicroglass III05Q939401Q10Q939402Q20Q939403QCellulose 15 μm (nom)015N 939404Cleanable metal mesh035W 939405060W 939406SPARE PARTSSecondary filter element (60 μm) CODELength 2 939414Length 3 extension element* 939415Seal kitCODESeal materialFluoroelastomer 916045027* Fully length 3 requires both 939414 + 939415.Please note the bolded options reflect standard options with reduced lead-time.221Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DFH2060 SeriesDuplex <strong>Filter</strong>sMax. 2200 l/min. 10 barMaximumperformance –minimum heightSlim welded housing construction withcast iron change over valve section.Horizontal mounting makes assemblyeasier in cranked positions. High dirtholding capacity and low pressuredrop. Several media options. Onereservoir can be closed for service.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Heavy duty diesel enginelubricating systems• High flow industrial lubricatingsystemswww.parkerhfde.com222Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:One reservoir can be closed for service, horizontalinstallation. 1300 mm (1.3 m) free space must bereserved in front of the filter for filter elementremoval. <strong>Filter</strong> includes 3 elements/side.Connections:Square flanges with port size Ø160 mm. Standarddelivery includes blind counter flanges.Maximum operating pressure:10 barSeal material:FluoroelastomerOperating temperature:-20°C...+120°C with Fluoroelastomer seals,-20°C...+160°C with metal mesh elements andFluoroelastomer seals.Housing material:Steel/cast iron (GJS)Weight:390 kgNominal flow rate (30 cSt):2200 l/min (132 m 3 /h)Bypass valve:For the primary filter only, opening pressure 2.0 barIndicator options:Visual, electrical or electronic indicator requires anindicator block. For details see indicator options tablein product description page and catalogue section 4.Primary filter:- Three filter elements per reservoir- Filtration materials• Resin impregnated heavy duty cellulose paper15 μm nominal• Glassfibre Microglass III• Cleanable metal meshSecondary filter:- One filter element per reservoir- Filtration material cleanable wire mesh- Filtration degree 60μmFluid compatibility:Suitable for use with regular hydraulic and lubricationoils. For other fluids consult Parker Filtration.223Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DFH2060 SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStDFH2060 housingFlow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180DFH2060 element pack (3 pcs)/one side in useDFH2060 element pack (3 + 3 pcs)/both sides in useFlow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180Flow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180224Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DFH2060Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filter, horizontal installation DFH2060Table 2FILTER SIZELength/elementsCODE3 elements/side 3Table 3DEGREE OF FILTRATIONElement typeCODEMicroglass IIIGlassfibre 5 μm05QGlassfibre 10 μm10QGlassfibre 20 μm20QOther mediasCellulose 15 μm (nom)015NCleanable metal mesh 35 μm035WCleanable metal mesh 60 μm060WTable 4SEAL TYPESeal materialCODEFluoroelastomerVTable 5INDICATORSOptionsCODENo indicator blockNIndicator port pluggedPVisual indicatorM3Electrical indicatorT1Electronic indicator (PNP/N.O.)F1Electronic indicator (NPN/N.O.)F2Table 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE2.0 bar/1.5 bar HTable 7FILTER CONNECTIONSPort sizeCODESquare flange 160 mmX160Table 8OPTIONSOptionsCODEWith bypass 1REPLACEMENT ELEMENTS WITH FLUOROEL<strong>AS</strong>TOMER SEALSMedia codeOrder codeGlassfibreMicroglass III05Q939381Q10Q939382Q20Q939383QCellulose 15 μm (nom)015N 939384Cleanable metal mesh035W 939385060W 939386SPARE PARTSSecondary filter elementCODEWire mesh 60 μm 939394Seal kitsCODEFor valve assembly 916045064For vessel (two kits required for 916045066complete filter)Please note the bolded options reflect standard options with reduced lead-time.225Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2070 SeriesDuplex <strong>Filter</strong>sMax. 1800 l/min. 10 barBig and tall forhigh flowWelded housing constructionwith cast iron change over valvesection. Compact, low-depth duplexconstruction for vertical mounting.High flow and good dirt holdingcapacity combined to low pressuredrop. Several media options for heavyfuel oil and lube systems.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comApplications:• Diesel engine lubricatingsystems• High flow industrial lubricatingsystems• High flow heavy fuel oilsystems as safety filterwww.parkerhfde.com226Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDuplex filter:One reservoir can be closed for service, verticalinstallation. Length 2 includes 2 elements/side andlength 3 includes 3 elements/side.Connections:Square flanges with port size Ø160 mm. Standarddelivery includes blind counter flanges.Maximum operating pressure:10 barSeal material:FluoroelastomerOperating temperature:-20°C...+120°C with Fluoroelastomer seals,-20°C...+160°C with metal mesh elements andFluoroelastomer seals.Housing material:Steel/cast iron (GJS)Weight:Length 2: 310 kgLength 3: 400 kgNominal flow rate (30 cSt):Length 2: 1500 l/min (90 m 3 /h)Length 3: 1800 l/min (132 m 3 /h)Bypass valve:For the primary filter only, opening pressure 2.0 barIndicator options:Visual, electrical or electronic indicator requires anindicator block. For details see indicator options tablein product description page and catalogue section 4.Primary filter:- Two filter elements per reservoir- Filtration materials• Resin impregnated heavy duty cellulose paper15 μm nominal• Glassfibre Microglass III• Cleanable metal meshSecondary filter:- One filter element per reservoir- Filtration material cleanable wire mesh- Filtration degree 60 μmFluid compatibility:Suitable for use with regular hydraulic and lubricationoils and fuel oils. For heavy fuel oil applications, pleasespecify option P2 (see table 8 in product description)which ensures that filters are delivered withdocumentation according PED 97/23/EC category II.For other fluids consult Parker Filtration.Type A B C D ELength 2 440 960 845 478 500Length 3 706 1227 1112 745 560227Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DF2070 SeriesPressure Drop CurvesΔp total=Δp housing+Δp elementThe recommended level of the initial pressure drop forthis filter is maximum 0.5 bar.Δ p-curves are measured at 30 cSt.If the medium used has a viscosity different from 30 cSt,pressure drop over the element can be estimated asfollows:Δp total=Δp housing+Δp elementxworking viscosity30 cStDF2070 housingFlow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180Length 2 element pack (2 pcs)/one side in useLength 2 element pack (2 + 2 pcs)/both sides in useFlow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180Flow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180Length 3 element pack (3 pcs)/one side in useLength 3 element pack (3 + 3 pcs)/both sides in useFlow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180Flow [m 3 /h]0 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180228Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Product Description for DF2070Complete <strong>Filter</strong>:Table 1 Table 2 Table 3 Table 4 Table 5Table 6Table 7Table 8Table 1FILTER TYPEModelCODEDuplex filterDF2070Table 2FILTER SIZELength/elementsCODE2 elements/side 23 elements/side 3Table 5INDICATORSOptionsNo indicator blockIndicator port pluggedVisual indicatorElectrical indicatorElectronic indicator (PNP/N.O.)Electronic indicator (NPN/N.O.)CODENPM3T1F1F2Table 3DEGREE OF FILTRATIONElement typeMicroglass IIIGlassfibre 5 μmGlassfibre 10 μmGlassfibre 20 μmOther mediasCellulose 15 μm (nom)Cleanable metal mesh 35 μmCleanable metal mesh 60 μmTable 4SEAL TYPESeal materialFluoroelastomerCODE05Q10Q20Q015N035W060WCODEVTable 6BYP<strong>AS</strong>S VALVEBypass/indicator settingCODE2.0 bar/1.5 bar HTable 7FILTER CONNECTIONSPort sizeCODESquare flange 160 mmX160Table 8OPTIONSOptionsCODEWith bypass 1PED category 2P2If several options are selected, please add the codes in order listed above.REPLACEMENT ELEMENTS WITH FLUOROEL<strong>AS</strong>TOMER SEALSMedia codeOrder codeGlassfibreMicroglass III05Q939361Q10Q939362Q20Q939363QCellulose 15 μm (nom)015N 939364Cleanable metal mesh035W 939365060W 939366SPARE PARTSSecondary filter element (60 μm) CODELength 2 939374Length 3 939375Seal kitsCODEFor valve assembly 916045064For vessel (two kits required for 916045067complete filter)Please note the bolded options reflect standard options with reduced lead-time.229Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DIVICOTogether, we can change the course of hydraulic and lube maintenancehistory aboard ship and in dock.DF40 Duplex <strong>Filter</strong>s EPF “iprotect” high pressure filter iCountPDParker is the first name for filtration aboard ship, offshore and on the dock with a unique blend ofmarine fuel and lube filtration products and innovative customer solutions. Everything from ondeckwinches and cranes, power generators to the engine room and steering hydraulics requireParker quality filtration. For predictive maintenance needs there’s the Parker Fluid ContaminationMonitoring programme with particle analysers, detectors and bottle sampling models for maximumportability.For details please visit our website.230Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Par-Test Laboratory Analysis ServiceSystemperformance doesnot rely on luck.Best practice forreducing cost ofownershipOil Analysis serviceThe Par-Test service is a completeand comprehensive laboratoryanalysis performed on a smallquantity of fluid supplied by thecustomer. Contamination monitoringand reporting of fluids has neverbeen more important as part of thepredictive maintenance and systemmonitoring programme.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• The Par-Test service is a complete laboratory analysis service.• Analysis is performed on a small quantity of fluid supplied by thecustomer.• Parker Filtration has 3 <strong>Europe</strong>an laboratory locations.• The resulting Par-Test report is comprehensive in its detail.www.parkerhfde.com231Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Par-Test Laboratory Analysis ServiceChanges to ISO StandardsThe impact on filter performance reporting andthe contamination code.The changes to ISO contamination and filtration standardswere brought about to solve accuracy, tracability, andavailability issues. It is important to remember that both realworld hydraulic system cleanliness levels and actual systemfilter performance remain unchanged.However, the reporting of cleanliness levels and filterperformance has changed due to the new particle countercalibration and multi-pass test procedures.The actual calibration method.ISO 11171 is the new particle counter calibration method andutilises calibration fluid made from ISO Medium Test Dust(ISO MTD) suspended in MIL-H-5606. The calibration fluidis traceable to the National Institute of Standards andTechnology (NIST) and is designated by NIST as StandardReference Material (SRM) 2806. ISO 11171 is replacing ISO4402 which is based on obsolete AC Fine Test Dust (ACFTD)It is important to note that the ISO 11171 calibration methodis based on a distribution of particles measured by theirequivalent area diameter, whereas ISO 4402 is based ondistribution of particles measured by their longest chord.Also, the NIST work utilised scanning electron microscopy forparticles below 10μm in size, whereas sizing distribution onACFTD utilised optical microscopy.The charts to the right show the approximate particle sizerelationship between the calibration methods.Chart 1 - ISO ComparisonFormer two-digit ISO 4406:19875μm / 15μm14 / 11Former three-digit ISO 4406:19872μm / 5μm / 15μm17 / 14 / 11New three-digit ISO 4406:19994μm (c) / 6μm (c) / 14μm (c)18 / 14 / 11Chart 2 - Particle Size ComparisonACTFD size(per ISO 4402:1991)μm12357101520253040NIST size(per ISO 11171:1999)μm (c)4.24.65.16.47.79.813.617.521.224.931.7232Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Laboratory Analysis ServiceThe Par-Test service is a complete laboratoryanalysis performed on a small quantity of fluidsupplied by the customer.Provision of a sampling bottle of known cleanlinessand a pre-addressed bottle container, both ofwhich are designed to be suitable for mailing, ispart of the service.Most contaminant in hydraulic or lube oil systemsare invisibleDamage causing particles range from 5 to 40 micrometers insize, but the limit of human visibility is only 40 micrometers.Harmful particulate matter is often invisible, even in very highconcentration. Also, acids, water and other fluid oxidationby-products cannot be easily detected by human senses.Some other means must be used to monitor fluid conditions.Fluid analysis is the only method to check fluid conditionsFluid analysis services may be as simple as a sample batchcomparison. Or, a full laboratory treatment may be used toindicate the sources and quantity of contamination. In eithercase, important test results are achieved. Parker offers bothtypes of services to fit your specific needs.Ordering InformationPar-Test: laboratory fluid analysisThe purchase price for the Par-Test sample kit includes thepre-cleaned and sealed sample bottle, mailing tube with apre-addressed label, sample information data sheet to becompletely filled out by the end user and the completelaboratory analysis.Par-Test: complete laboratory analysisPar-Test is a complete laboratory analysis, performed on asmall quantity of fluid. The test results are very comprehensive,and can include the following critical analysis:• Spectrochemical analysis of over 20 wear metals andadditives.• Particle count reported over five size ranges. The particlecount is expressed as an ISO cleanliness code. It is alsoplotted on a graph for better comparisons.• Viscosity at 40°C, 100°C, Viscosity Index and TAN arereported.• Water content is expressed as a%ofvolume. Manyhydraulic systems may tolerate up to 300 ppm (.03%) ofwater contamination. Some bearing or lube oil systemsmust strictly limit water content.• Analysis recommendations summarises Par-Test resultsand indicates what action should be taken to prevent anypotential problems.• Fast turnaround—test results are mailed back to youwithin 24-48 hours after receiving your fluid sample. Testsincluding Spectro-chemical analysis allow 7 days.Par-Test: concise and completeThe Par-Test report you receive is neatly organised. Youmay quickly analyse the test results — or compare them toa previous sample. Using the same “unit number” on yoursample information form will allow up to four test results listedon a single Par-Test report form. Par-Test belongs in yourregular maintenance program. Comprehensive and accuratefluid analysis will help you prevent major hydraulic or lube oilsystem problems. Order Par-Test today (see below details)and see how easy and complete—fluid analysis can be.IMPORTANTParker Filtration has three <strong>Europe</strong>an laboratory locationsable to receive and process fluid samples. One locationin the UK, one location in The Netherlands taking care ofCentral <strong>Europe</strong>an analysis and a location in Finland to provideScandinavian analysis. Decide on the Option required andcontact the relevant Parker location.Par-Test laboratory analysis service- UK (Email: filtrationinfo@parker.com) (option 2 only)- Holland (Email: filtration.netherlands@parker.com) (all options)- Finland (Email: filtration.finland@parker.com) (option 2 only)OptionOption 1Option 2Option 3Option 4DescriptionSample bottle plus particle/membrane/water/microscopic photo analysis (Holland only)Sample bottle plus particle/water/spectro-chemical analysis (Finland and UK only)Sample bottle plus membrane/water/microscopic photo analysis (Holland only)Sample bottle plus particle/membrane/water/spectro-chemical/microscopic photo analysis (Holland only)Note: Please allow 24-48 hours of laboratory time plus mailing/shipping time to receive your test results.233Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Par-Test ChartsLaboratory Analysis ServicePAR :TESTFluid AnalysisSAMPLE DATADATE DATELAB# TAKEN/ FILTERTESTEN SERVICE9261 30JUN8902JUL899262 28JUL8930JUL899263 20AUG8922AUG89PARKER NO. CLIENT NO. UNIT NO.1000. 27 4714SPECTROCHEMICAL ANALYSISVALUES EXPRESSED IN PARTS PERMILLION (PPM) BY WEIGHTIRONCHROMIUMLEADCOPPERTINALUMINIUMNICKELSILVERMANGANESEOTHERSILICON295BORONLOCATIONFILTERMANUF PARKERMICRON RATINGSODIUMMAGNESIUMCALCIUMRETURNBARIUM10NOMPHOSPHORUSPUMPMODELZINCMOLYBOENUMLINE TRUCK3 0 0 2 0 0 0 0 0 9 0 0 2 29 291339 233 0 0 0 02 0 0 2 0 0 0 0 0 9 0 0 4 24 25 156 244 0 0 0 01 1 0 1 0 0 0 0 0 7 0 0 1 29 24 133 207 0 0 0 0TITANIUMVANADIUMCADMIUMFLUID MANUFFLUID TYPEPHYSICAL PROPERTY DATAVIS 40ºC(VIS 104 ºF)VIS 100ºC(VIS 212 ºF)NUMBER COPIES 2TYPE NUMBER 2WATER32.7 N/A 032.8 N/A 032.3 N/A 0ANALYSIS RECOMMENDATIONSLAB# ISO RATING9261 20/ 179262 19/ 149263 16/ 12PARTICLES PER 100 MILLILITER GREATER THAN INDICATED SIZE>5 >15 >25 >50 >100667,488 67,608 15,440 872 88315,466 12,052 2,496 296 841,758 2,280 664 112 16LAB# ANALYSIS RECOMMENDATIONS9261 EXTREME LEVELS OF CONTAMINATION INDICATE POSSIBLE WEAR PROBLEMS.HIGHER PRESSURE SYSTEMS(.1500 PSI) SHOULD RECEIVE IMMEDIATEFILTRATION ATTENTION. SAMPLE AGAIN WITHIN 30 DAYS9262 EXTREME LEVEL OF CONTAMINATION INDICATE POSSIBLE WEAR PROBLEMS.Since remedial advice is based on test results provided by others, and since corrective action, if any is performed by others,remedial advice is rendered without warranty or liability of any kind.NUMBER OF PARTICLES PER MILLILITRE GREATER THAN INDICATED SIZE235510 -2 10 -244332222PARTICLES211020IN FLUID10 455443 19 SIZE / NUMBER3221810 31710 3554 164332 152101410 25 135443312221110101055443 93228171554 64332 5210 -1 410 -15 35443232215 10 15 20 25 30 40 50 60 70 80 90 100PARTICLE SIZE, micrometersNUMBER OF PARTICLES PER MILLILITRE GREATER THAN INDICATED SIZELAB# ANALYSIS RECOMMENDATIONSHIGHER PRESSURE SYSTEMS ( >1500 PSI) SHOULD RECEIVE IMMEDIATEFILTRATION ATTENTION. SAMPLE AGAIN WITHIN 30 DAYS9263 CLEANLINESS LEVEL SUITABLE FOR MOST SYSTEMS. SERVO CONTROLSREQUIRE CLEANER FLUID. CONTINUE REGULAR PREVENTIVEMAINTENANCE. SAMPLE AGAIN IN 2-3MONTHS.Viscosity Conversion ChartcSt (centistrokes) SUS (Saybolt Universal Seconds)10 4620 9325 11630 13932.4 15040 18550 23270 32490 417Comparisons are made at 100ºF (38ºC).for other Viscosity Conversion Approximations, use the formula: cSt = SUS4.635Cleanliness Level Correlation TableACFTD N<strong>AS</strong> DisavowedISO Particles/Millilitre Gravimetric 1638 “SAE” LevelCode ≥ 5 Micrometers ≥ 15 Micrometers Level, mg/L (1964) (1963)26/23 640,000 80,000 100025/23 320,000 80,00023/20 80,000 10,000 10021/18 20,000 2,500 1220/18 10,000 2,50020/17 10,000 1,300 1120/16 10,000 640 1019/16 5,000 640 1018/15 2,500 320 9 617/14 1,300 160 8 516/13 640 80 1 7 415/12 320 40 6 314/12 160 20 5 214/11 160 20 5 213/10 80 10 0.1 4 112/9 40 5 3 011/8 20 2.5 210/8 10 2.510/7 10 1.3 110/6 10 .64 0.01For more information: Contact Parker Filtration’s Condition Monitoring Centre: Tel: +44 (0) 1842 763299.Fax: +44 (0) 1842 756300. Email: conmoninfo@parker.comParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>234FDHB500UK.
Guardian ®Portable <strong>Hydraulic</strong> Filtration SystemsMax. 15 l/min - 3.4 barMaking portablesystem cleanlinessavailable all thetimeA ‘use anywhere’ fluidtransfer solutionThe Guardian® portable filtrationsystem is designed to ‘clean’ newoil and deliver it to a system or carryout a clean up of used fluid to itsoriginal condition. Maximum pressure3.4 bar. Maximum flow 15 l/min. Awater removal element option is alsoavailable.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Guardian ® is designed to ‘clean’ new oil and deliver it to asystem.• Carries out a clean up of existing fluid to its original condition.• Maximum pressure 3.4 bar. Maximum flow 15 l/min.• <strong>Filter</strong>s petroleum based oils, water emulsions and dieselfuels.www.parkerhfde.com235Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Guardian ®Portable <strong>Hydraulic</strong> Filtration SystemsFeatures & BenefitsFeaturesPortable and robustdesignLightweight designQuick disconnecthose connectionsVisual indicator110VAC or220/240VAC optionsA range of clean-upelementsWater removal elementoptionAdvantagesNote: 15 l/min / Fluid transfer at a controlled rateGuardian is designed to be used anywhere.Take it to the system or transfer new oilfrom the drum.Only 10.6 kgStorage is simple. Guardian’s compactdesign means it is easily stowed.Operational condition is constantly monitoredGuardian’s power flexibility means it canbe used anywhere.A user can specify the media that will bestachieve his clean up/filtering requirements.Water removal from the system is animportant requirement for fluid efficiency.Application ExampleA hydraulic system reservoir had become heavilycontaminated and the hydraulic system was in danger of acatastrophic failure from particulate and water contamination.These contaminants were introduced from various points– airborne, wear and introduction of new ‘dirty’ fluids. TheGuardian filtration system was installed into the hydraulicsystems reservoir and run completely off-line for a period oftime until acceptable contamination levels were achieved.This off-line attachment allowed the hydraulic system tocontinue operating without costly downtimes. Additionally aWater Removal (WR) Element was also fitted to the Guardian,which radically reduced the water contamination within theentire system.This customer will ‘only now’ introduce new fluids into hishydraulic application by using the Guardian filtration systemand in addition utilises the Guardian off-line option to maintainand protect his system.Contamination levels are monitored by an LCM202022 whichcontrols the Guardians operation.Result: reliability and complete confidence restored.• Fluid transfer• Offline reservoir clean-up• Injection moulding machines• Royal navy surface fleet systems• Paper mills• Industrial equipment• Mobile equipment• Marine system supportThe Parker Filtration Guardian ®portable filtration systems.Guardian is a portable filtration system with twomain functions: to ensure that new ‘dirty’ fluidoften contaminated during handling, is deliveredto the system at a specific cleanliness; and topermit periodic clean up of existing fluid tooriginal condition.Recommended fluids: Petroleum based oils,water emulsions and diesel fuels.236Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationQuick access zero leakage 3 /4” -11.5 NH hose connectionsNon conductivecarrying handle1.7 bar differentialvisual indicator140 minimum elementremoval clearanceRemovable element208mm3 /4” wire reinforced flexible outlethose, 1.6m (63 inches) lengthinlet hose, 1.6m(63 inches) length3 /4” wire reinforcedflexible outlet hose,1.6m (63 inches) length3 /4” – 11.5 NH hose thread (outlet)Motor is UL recognised & CSA listedVibration isolating rubber feet 4-plsOn/off switchInlet195mm (7.68”)51mm (2.00”)Outlet152mm(5.98”)Alternative customer selectable inlet and outlet ports (plugged)Visible & easily cleanable inlet strainer394mm(15.57”)237Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Guardian ®Portable <strong>Hydraulic</strong> Filtration SystemsOrdering Information and Product ConfiguratorStandard products tablePart numberSupersedesModel (fluorocarbon)MotoroptionElement(μ)OptionsPlug typeReplacementelementGT4E110Q1UKGT4E110Q1EURGT4E210Q1INDF3-GT4E-1-10Q-1-UKF3-GT4E-1-10Q-1-EURF3-GT4E-2-10Q-1-INDGT4EGT4EGT4E11210Q10Q10Q111UKEURINDG04396QG04396QG04396QNote 1: Motor Options*Option 1 = 220/240 VACOption 2 = 110 VAC.Note 2: Plug Type**IND = Industrial 110VAC UK Option.Replacement elementsGuardian replacement elements to ISO16889Part numberG04396QG04394QG04395QG04397QG04400G04401G04402932019Media code10Q02Q05Q20Q254074WRMedia typeMicroglass IIIMicroglass IIIMicroglass IIIMicroglass IIIWire meshWire meshWire meshWater removalNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require youto contact Parker Filtration for availability.238Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Filtration Unit<strong>Hydraulic</strong> Service EquipmentMax. 15 l/min -6barPermanent andoffline fluid cleaningReliable fluid transfer fromdrum to systemThe Filtration unit offers bothpermanent and offline fluid cleaningwhere higher levels of contaminationare expected. Maximum pressure 6bar. Maximum flow 15 l/min. Designedto take the unit to the application formaximum efficiency in use.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Filtration unit offers both permanent and offline fluid cleaningwhere higher levels of contamination are expected.• Lightweight design. Spin-on 10 micron Abs. element.• Maximum pressure 6 bar. Maximum flow 15 l/min.• Robust construction.www.parkerhfde.com239Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Filtration Unit<strong>Hydraulic</strong> Service EquipmentFeatures & BenefitsFeaturesSingle phase and three phasemotor options15 l/min flowRed/green visual indicatorRobust constructionSpin-on elementLightweight designAdvantagesFlexibility of power outputFluid transfer at a controlled rateClear indication of condition during operationReliability designed inEasy change elementEasy to locate when and where requiredBenefitsEnd user choice dependent onapplicationReliable fluid transfer from drum tosystemHigh visibility during operationDesigned to be used even in the mostdemanding conditions10 micron Abs. elementsTake the unit to the application.It’s that easyTypical ApplicationsFluid transferSmall lubrication systemsConstant flushing loopsMaintenance flushingOffline filtration in circuitswhere pressure and flowpulses are expectedThe Parker Filtration Service Equipment.Designed to offer both permanent and offlinecleaning where higher levels of contaminationare expected and portable additional clean-upcapability as part of your preventative maintenancepackage.240Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationElectric motorFrame Size: IEC Frame 63. Foot and flange ‘D’(Flange IEC.F115). Totally enclosedfan cooled.Windings: 380/420 volt 3 ph/50 Hz, 220 Volt 1ph/50 Hz 110 Volt 1 ph/50 Hz.Power: 0.18 kW ( 1 /4 hp).Speed: 1400 rev/min.It is recommended that the Unit is wiredindependently from the main system whenpermanently installed, to facilitate the simplechanging of the filter element without interruptingthe main system.Filtration unit descriptionThe Parker ‘Filtration Unit’ consists of an electricmotor directly coupled to a hydraulic pump,which has a built in bypass fitted and spin on filterelement. Fluid drawn in at pump inlet is circulatedthrough the filter element and is thus cleanedbefore being delivered from the outlet port. A builtin bypass valve safeguards the element in the eventof blockage and returns oil to the pump inlet, thisensures that all fluid output from the unit is filtered,whatever the operating conditions. A visual elementcondition indicator is fitted to the pump. A unit isavailable without electric motor for customers whoprefer to supply their own. See installation notesand part numbers for ordering.Pump and bypass valvePump: Lobe type for quiet running.Flow: 15 l/min.Connections: Inlet G 1 /2 ( 1 /2” BSP).Outlet G 3 /8 ( 3 /8” BSP).Bypass Valve: Cracks at 1.5 bar approximately. Bypassed oil is recirculated withinthe pump. Bypassed oil is reintroduced into the inlet port and doesnot pass the filter. Bypass operates when the element iscontaminatedand needs replacing. This condition will be made clear by the visualindicator. The Bypass Valve could also open when being used withhigh viscosity fluids, thus effectively reducing the unit output.<strong>Filter</strong> and condition indicator<strong>Filter</strong> Type: Rapid replacement spin-on can with 10μ cellulose element.Ensure that end clearance (20mm) is available topermit element withdrawal.10μ absolute. MXR8550Visual indicatorHas green and red zones on the dial. Needle in the green zone indicates normaloperation. When the needle enters the red zone, the bypass valve will permit a flowof oil to return to the pump inlet – The element will then need to be replaced. Thebypass is fully open when the needle is at the extreme of the red sector.Sound levelThe Filtration Unit under normal conditions will operate at a sound pressure level ofapproximately 65 dBA.Installation Detailsmm(inches)100 (3.94)155 (6.1)A432(17.0)66(2.60)105 (4.13)71(2.80)177(6.97)75(2.95)80 CTRS(3.15)4xØ74 x (0.27)45(1.77)8(0.31)147(5.78)3/8” BSP (G 3 /8)100 CTRS (3.94)131 (5.16)Ø140 (5.51)Ø140 (5.51)Ø125 (4.92)1/2” BSP (G 1 /2)20(0.79)Ø94(3.70)Single Threephase phaseDimension A 221 184(8.70) (7.24)Dimension B 45 25(1.77) (0.98)241Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Filtration Unit<strong>Hydraulic</strong> Service EquipmentSectioned DetailOutletPump delivery of oil900 L (235 USG)/HR10μ ‘Multipass’tested elementMInletOutCircuit symbolEnlargement ofbypass valveInVarious electronicmotor optionsIntegral bypassInstallation and Operational NotesThe Filtration Unit is suitable for mineral based oils. Maximumviscosity at start up condition 850 centistokes-minimumviscosity 8 centistokes. Note that at 850 centistokes outputwill be reduced due to opening of bypass. Maximum operatingtemperature +90°C (194°F).The inlet pipe should be as large and as short as convenientto reduce inlet depression to a minimum. It should not be lessthan 12mm (0.47”) internal diameter.Suction element SE75111110 is supplied with all assembliesand must be installed. Ensure that a minimum 75mm (2.95”)head of oil is maintained above the suction element.The outlet pipe should be as large as possible to reducethe possibility of delivery pressure exceeding the bypassvalve setting. It should not be less than 10mm (0.39”) internaldiameter. The discharge end of this pipe should alwaysbe below the oil surface to minimise aeration. It is equallyimportant, to ensure the ends of the inlet and outlet pipesare as far apart as possible. It is recommended that a bafflebe positioned between the suction and return pipes, to givemaximum circulation of oil.Installation details – 2742The Filtration Unit is available without an electrical motor,any type motor may be used of identical frame, flange andshaft size to that stated in the specification. Remove the key,fitted to electric motor shaft. There are four nuts and boltsM8-1.25mm thread supplied loose, the pump housing iscomplete with a shaft adaptor with internal drive pin.To fit pump to electric motor simply insert drive shaft of motorinto the pump drive adaptor ensuring the drive pin engagesin shaft keyway and that the locating spigot are correctlyengaged. Complete the assembly by fitting the four nuts,bolts and washers.242Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ideal ApplicationElement withdrawalclearance minimum20(0.78)Inlet G 1 /2 ( 1 /2 BSP)Suction flangeOutletG 3 /8 ( 3 /8 BSP)Return bush90 CTRS(3.54)4-off holes Ø7 (motor fleet)tap M6 for installationElement condition indicatorGreen area – bypass closedEntering red area – bypass crackedExtreme of red area – bypassfully open.70(2.75)75 (2.95)minimum12(0.47)12 boreminimum112 CTRS(4.41)SE75111110Suction element250 minimum(9.84)Oil level10 bore minimum(0.39)Baffle recommendedOrdering InformationStandard products tablePart numberDescription10μ abs. filtration pump complete with 3 phase electric motor2741(380/420/50 Hz H.E.F.C class F) visual indicator10μ abs. filtration pump without electric motor (supplied with27424 x nuts,bolts and washers) visual indicator10μ abs. filtration pump complete with single phase electric2743motor (220/50 Hz T.E.F.C class F) visual indicator10μ abs. filtration pump complete with single phase electric2744motor (110/50 Hz T.E.F.C class F) visual indicatorNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selectionNote 2: Alternate displayed part number selection will require you to contact Parker Filtration for AvailabilityWeight5.92 Kg(13.02 lbs)1.50 Kg(3.3 lbs)6.20 Kg(13.64 lbs)6.20 Kg(13.64 lbs)Replacement elementsMXR8550(10μ abs.)243Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Notes244Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
10MFP Serieswith Moduflow TM plusPortable Filtration TrolleyThe ideal wayto pre-filter andtransfer fluidTransfer fluid from drums orstorage tanksUsing a Parker portable filter trolleyis the most economic way to protectyour system from the harm that canbe caused by contamination.Option. Consider specifying anicountPD particle detector to allowaccurate detection of particulate whentransferring oil.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• 10MFP hydraulic trolley is the ideal way to pre-filter andtransfer fluids into reservoirs or to clean up a system.• Heavy-duty frame but still lightweight and portable.• Maximum flow 38 l/min.• Par-Gel water removal elements available.• icountPD particle detector option.• MS Moisture Sensor option.www.parkerhfde.com245Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
10MFP SeriesPortable Filtration TrolleyApplications for Portable <strong>Filter</strong> Carts• <strong>Filter</strong>ing new fluid beforeputting into service• Transferring fluid fromdrums or storage tanks tosystem reservoirs• Conditioning fluid that isalready in use• Complimenting existingsystem filtration• Removing free water from asystem• For use with fluids such ashydraulic, gear and lubeoilsParker portable filter carts are theideal way to prefilter and transferfluids into reservoirs or to cleanup existing systems.Fluid should always be filteredbefore being put into use. Newfluid is not necessarily clean fluid.Most new fluids (right out of thedrum) are unfit for use due tohigh initial contamination levels.Contamination, both particulateand water, may be added toa new fluid during processing,mixing, handling and storage.Water is removed by installingPar-Gel elements in the outletfilter. Par-Gel elements aremade from a polymer which has avery high affinity for free water.Once water comes into contactwith this material, it is removedfrom the system.The Parker portable filtercart uses two high capacityModuFlow Plus filters for longelement life and better systemprotection. The first stage (inlet)filter captures larger particles,while the second stage (outlet)filter controls finer particlesor removes water. A ruggedindustrial quality gear pump getsthe job done fast.Using a Parker portable filter cartis the most economical way toprotect your system from theharm that can be caused bycontamination.Features Advantages Benefits• Two filters instead of one • Pump protection and long • Element cost savings andw/ 2.5 times increased DHC element life trouble-free service• Wide variety of particulate • Capable of getting a fluid to • Extends fluid life and systemelements available a desired cleanliness level performance• Par-Gel water removal • Removes “free water” from • Gets dirt and water out ofelements available a system system with one process• Heavy duty frame • Rugged and durable • Built to last for many yearsof use• Lightweight and portable • Easy to move from • One person operationplace-to-place• 3.35 m hose and • Additional hardware • Ready to use as receivedwand assemblies included not necessary246Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
FeaturesHose & wandassembly• Ready to use; noadditional hardwareneeded• Flexible hoses fortight spots• Kink-resistant hoseprevents pumpcavitationVisual indicator• Tells you when tochange elementIcount PD (SmartCart option)• Early warning LED ordigital display indicatorsfor Low,Medium and Highcontamination levels• Self diagnostic softwareService cover• Top-accessible foreasy changing ofelementsHeavy Duty frame• Rugged and builtto lastElectrical Cord Reel OptionConsult Parker FiltrationDual filters• Two stage, doublelength filtrationfor long elementlife and pumpprotectionElements (not shown)• Available for both particulateand Water Removal (WR)in double length w/ 2.5times increased dirt holdingcapacityGear pump• Industrial quality• Quiet operation• Dependable, long life110V/220V AC motor• Industrial brandnameDrip tray• Helps keep the workarea safe and clean247Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
10MFP SeriesPortable Filtration TrolleySpecifications:Maximum Recommended FluidViscosity:10MFP – (108 cSt) 500 SUS0.85 specific gravityVisual Indicator (outlet filter):Visual differential type3-band (clean, change, bypass)<strong>Filter</strong> Bypass Valve Settings(Integral to Element):Inlet – 0.2 bar (3 psi)Outlet – 2.4 bar (35 psi)Flow Rate:38 L/min (8.3 Gal/min)Operating Temperature:-40°C to +66°C (-40°F to +150°F)Electrical Service Required:10MFP – 110/220 volts, 60/50Hz, single phase, 10/5 ampsElectrical Motor:10MFP–¾hp@3450 rpm, O.D.P.Thermal overload protectionConstruction:Cart frame – Steel<strong>Filter</strong> head – Aluminum<strong>Filter</strong> bowl – SteelHoses – PVC (Std.)EPDM (high temp option)Wands – PVC (Std.)Steel tube (high temp option)Weight:45.4kg (110 lbs.)Dimensions:A = Height: 1034mm (40.7 in.)B = Width: 648mm (25.5 in.)C = Depth: 503mm (19.8 in.)New feature!C<strong>AS</strong>martCartParker is pleased to announce itsR&D effort to offer a diagnostic filtertrolley - the SmartCart. The icountPDparticle detector, the most up-to-datetechnology in solid particle detection,can be mounted to the standardframe of the filter cart for enhancedmonitoring of your hydraulic system.The icountPD, coupled with the filtercart is a cost effective solution tofluid management and contaminationcontrol.Note: Electrical Cord Reel is anoption. Consult Parker FiltrationB248Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Typical Fluid Cleanliness LevelRequirementsMany manufacturers of hydraulic components haveestablished fluid cleanliness levels for their components.Using a portable filter cart can be a very effective wayto reach and maintain these cleanliness levels.ComponentISO Cleanliness LevelServo control valves 16/14/11Proportional valves 17/15/12Vane and pistonpumps/motors 18/16/13Directional and pressurecontrol valves 18/16/13Gear pumps/motors 19/17/14Flow control valvescylinders 20/18/15New fluid 20/18/15<strong>Filter</strong> Cart Element PerformanceMedia <strong>Filter</strong> CapacityCode Media (Grams)40W Woven Wire *40SA Synthetic *20Q Microglass III 14010Q Microglass III 13505Q Microglass III 13002Q Microglass III 110Beta Rating10000EfficiencyEfficiency %<strong>Filter</strong> Cart PerformanceFluid cleanliness levels are a function of initialcontamination levels, contamination ingression rates,reservoir size and filter element efficiency. The chartbelow lists approximate time requirements to achievecertain cleanliness levels based on the assumptionsnoted.Reservoir Time ProjectedCapacity Required Cleanliness(Litres) (Hours) Level (ISO)190 0.5 20/18/15190 1.0 17/15/12190 2.5 16/14/11378 1.5 18/16/13378 2.5 17/15/12378 4.0 16/14/11757 2.5 19/17/14757 3.5 18/16/13757 5.0 17/15/12Notes:The results in the chart are based on the following assumption:1. Initial contamination level is 500,000 particles greater than10 micrometers per 100 ml of fluid (10MFP cart).2. Inlet filter fitted with 40SA element; outlet with 20Q element.3. System ingression rate equal to1X10 6 particles greaterthan 10 micrometers entering the system per minute.Par-Gel Media WaterCapacityModel Fluid Viscosity Capacity10MFP 14cSt 500 ml43cSt300 ml2Q5Q100020010010Q20Q99.999.599.0Notes:1. Par-Gel elements are designed to remove “freewater”, which is defined as water that is above aparticular fluid’s saturation level.2. Capacity is very dependent on flow rate and viscosity.Not recommended with fluids in excess of 500 SUS.2095.02 50.00 4 8 12 16 20Micron Size (c)Notes:Multipass test run @ 80 l/pm to 3.5 bar terminal - 5 mg/l BUGL.249Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Assembly1. Install hoses to inlet and outletfilters by threading the hoseend with the straight threado-ring seal fitting into the filterflange.2. Connect the PVC tube wandsto the swivel fitting on the hoseend. When servicing the PVCtube wand, do not over-torquethe metal fittings going into thePVC coupling. Over-torquewill result in cracking thecoupling. Generally, 1/4 turnbeyond hand-tight is sufficient.Operating Instructions1. Insert the inlet wand assemblyinto the supply fluid receptacle(drum/reservoir). The RFPfilter is the inlet filter.2. Insert the outlet wand assemblyinto the clean fluid receptacle(drum/reservoir). The ILPfIlter is the outlet filter.Caution: Do not kink the hoseassemblies, this may result inexcessive vacuum or pressure atthe pump.3. Verify that the ON/OFF switchis OFF and plug the cord intothe proper grounded powersource (3 wire).4. Turn switch to ON position andcheck outlet wand for oil flow.Allow 30 to 60 seconds forfilters to fill with oil. If repeatedattempts to obtain oil flow fail,check pump inlet fittings fortightness, remove inlet filteraccess cover and verify thecover sealing o-ring is in place.For very viscous fluids it maybe necessary to pour 1 or 2quarts of fluid into the RFP inletfilter housing to prime pumpinitially.5. The condition of the filterelement should be monitoredby observing the cleanlinessindicator on the outlet filter.When the indicator is in theCHANGE position, both inletand outlet filter elementsMUST be replaced to preventfluid from going through thebypass in the filters.6. The inlet filter element is providedwith a 0.2 bar bypassspring, and prevents the pumpfrom cavitating if the element isnot changed. The outlet filterelement is provided with a 2.4bar bypass spring to preventexcessive pressure which maybe harmful to personnel or tothe filter cart.Warning: The filter bypassspring acts as a relief valve forthe pump. Do not restrict theoutlet hose with a shut-off valvewhich will defeat the functionof the bypass valve, causingexcessive pressure, which maybe harmful to personnel or to thefilter cart.7. The cleanliness indicator workson differential pressure and willindicate the condition of theelement (CLEAN, CHANGE, orBYP<strong>AS</strong>S).NOTE: The filter cart must bein operation for the indicator toread properly.Maintenance Instructions1. Turn switch to OFF positionand unplug cord from electricaloutlet.2. Remove tube wands from oilto prevent siphoning.3. Loosen hex head screws onfilter cover. Turn cover to clearscrews, remove cover.Trouble Shooting4. Pull filter element from the filterhead.a) Replace the syntheticor Microglass III elements.Verify replacement.b) Wire mesh elementscan be cleaned. Ultrasoniccleaners provide bestresults.5. Make sure element o-ringsseat properly into the head,making sure that the notch onthe element lines up with thenotch in the head.6. Inspect the cover o-ring andreplace if necessary.7. Relocate the cover and tightenhex head screws until theyare snug. Do not over-torquethese screws (Max torque isshown in maintenance leaflet).Do not interchange the inletfilter cover with the outlet filtercover. (The inlet filter has a“RFP” prefix, the outlet filterhas a “ILP” prefix).8. Contact the HFD servicedepartment at 419-644-0259regarding IPD calibration.9. IPD removal: remove oil linesfrom the IPD at the two fittingsclosest to the IPD. Disconnectthe two cables from the IPD.Remove IPD from cart via twoscrews. The cart can be usedwithout the IPD as long as thesample hoses are removedfrom the System 20. Protectsampling connectors fromcontamination.Problem Cause SolutionDoes not start ON/OFF Switch Turn switch ON, replace switch if defectiveNo electrical powerPlug in cartDefective motorContact service departmentNo oil flow or erratic <strong>Filter</strong> housing not filled with oil Allow pump to run 30 to 60 secondspump noise Suction leak Check tightness of inlet fittingsCheck o-ring in inlet filter cover for nicksKink or restriction in inlet hoseAdd 1 or 2 quarts of oil to inlet filterDefective pumpContact service departmentIndicator reads Element dirty Replace or clean elements (both filters)CHANGE or BYP<strong>AS</strong>S Oil extremely cold or viscous Change element to coarser micron ratingIndicator does not No outlet element Install elementseem to move 40 micron element installed in Check cart model number to verify correctoutlet filterelement. The inlet filter has a rating RFPprefix; the outlet filter has an ILP prefix250Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
<strong>Filter</strong> Trolley Parts181921**17151620**1413111012912Note: Item 14 - the CordReel is an option. ConsultParker Filtration87 36 45Item No. Description Qty1 Frame 11 Frame (SmartCart) 12 Pipe Reducer Fitting 13 Tube Fitting 14 Suction Tube Assy. 15 Adapter Fitting 16 Pump 17 Adapter Fitting 18 Wheel 29 Axle 110 Motor 10MFP 110 Motor 5MFP 111 Discharge Tube Assy. 112 Discharge Tube Top (SmartCart) 1Discharge Tube Bottom (SmartCart) 1System 20 (SmartCart) 1System 20 Fitting 1 (SmartCart) 21System 20 Fitting 2 (SmartCart) 2Item No. Description Qty13 Tube Fitting 114 Cord Reel 115 Inlet <strong>Filter</strong> – Nitrile 115 Inlet <strong>Filter</strong> – Fluorocarbon 116 Tube Wand Assy. – Seal Option B 217 Outlet <strong>Filter</strong> – Nitrile 117 Outlet <strong>Filter</strong> – Fluorocarbon 118 Hose Assy. – Seal Option B 219 Handle Grip 220 Element, (1) Inlet & (1) Outlet 221 Icount PD (SmartCart) 1Icount Cable (SmartCart) 1Icount Hoses (SmartCart) 2Icount Fitting 1(SmartCart) 2Icount Fitting 2 (SmartCart) 2Note: For information on replacement parts, consult ParkerFiltration251Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard Products TablePart Number Supersedes ModelMotorOptionInletElementOutletElementPlugTypeReplacementElementsInletOutlet10MFP140SA10Q1UK10MFP140SA10Q1EUR10MF140SA10Q1UK10MF140SA10Q1EUR10MFP 1* 40SA 10Q UK 940802 937399Q10MFP 1* 40SA 10Q EUR 940802 937399Q10MFP240SA10Q1IND10MF240SA10Q1INDNote 1: Motor Options* Option 1 = 220/240 VAC. Option 2 = 110 VAC.Note 2: Plug Type** IND = Industrial 110 VAC UK Option10MFP Replacement Elements10MFP 2* 40SA 10Q IND** 940802 937399Q10MFP Replacement Inlet ElementsPart NumberMicron Rating (c)Media TypeSeal TypeIntegral Bypass940971Q20Microglass IIINitrile0.2 Bar94080240SyntheticNitrile0.2 Bar94080340Stainless SteelNitrile0.2 Bar10MFP Replacement Outlet ElementsPart NumberMicron Rating (c)Media TypeSeal TypeIntegral Bypass937397Q4.5Microglass IIINitrile2.4 Bar937398Q6Microglass IIINitrile2.4 Bar937399Q10Microglass IIINitrile2.4 Bar937400Q 20 Microglass III Nitrile 2.4 Bar940734 WR Water Removal Nitrile 2.4 BarNote 1: Part numbers featured with bold highlighted codes will ensure a ‘Standard’ product selectionNote 2: Alternate displayed part number selection will require you to contact Parker Filtration for availabilityNote: the following elements are for the 10MF Filtration Trolley (which the 10MFP is replacing)10MF Replacement Elements10MF Replacement Inlet ElementsPart NumberMicron Rating (c)Media TypeSeal Type92444840SyntheticNitrileG02525Q20Microglass IIINitrileG0096840Stainless SteelNitrileG0096774Stainless SteelNitrile10MF Replacement Inlet ElementsPart NumberMicron Rating (c)Media TypeSeal TypeG00973Q10Microglass IIINitrileG04687Q4.5Microglass IIINitrileG00974Q6Microglass IIINitrileG02525Q20Microglass IIINitrile927584WRWater RemovalNitrileNote 1: Part numbers featured with bold highlighted codes will ensure a ‘Standard’ product selectionNote 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability252Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS Series - Models 185,600, 1200, 1800 and 2700Portable Purification SystemsReduce thecatastrophicresults of watercontaminationEliminate water from thehydraulic systemThe PVS Series Portable PurificationSystems, available in several models,is used to draw water contaminatedfluid out of a system, remove thewater content and return the ‘clean’fluid to the reservoir. Maximumflow 170 l/min (PVS2700). Reducethe catastrophic results of watercontamination.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• PVS draws water contaminated fluid out of a system.• Removes water, air and particulate content and returns the‘clean’ fluid to the reservoir.• Maximum flow 170 l/min (PSV2700).• Reduce the catastrophic results of water contamination.www.parkerhfde.com253Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS SeriesPortable Purification SystemsEffects of Water ContaminationWater is one of the most common and destructivecontaminants in a fluid system. When watercontaminates a system, it can cause seriousproblems such as:Corrosion by etching metalFluid breakdown, reduction of lubricatingproperties, additive precipitation, and oiloxidationReduced dielectric strengthAbrasive wear in hydraulic componentsFluid type<strong>Hydraulic</strong> fluidLubrication fluidTransformer fluidTypical saturation pointsPPM30040050%.03%.04%.005%Free water occurs when oil becomes saturatedand cannot hold any more water. This water isusually seen as cloudy oil or puddles of waterat the bottom of an oil reservoir. Water which isabsorbed into the oil is called dissolved water.At higher temperatures, oil has the ability to holdmore water in the dissolved stage due to theexpansion of oil molecules. As the oil cools, thisability reverses and free water will appear wherenot visible before. In addition to temperature, fluidtype also determines the saturation point for yoursystem (see chart above).Principles of OperationContaminated oil is drawn into the Parker portablepurification system by a vacuum of 25 In/Hg. Theoil passes through the in-line low watt densityheater/s where the oil is heated to an optimumtemperature of 66°C (150°F).The oil then enters the distillation column where it isexposed to the vacuum through the use of dedicateddispersal elements. This increases the exposedsurface area of the oil and converts the water toa vapor form, which is then drawn through thecondenser by the vacuum pump. The vapour returnsto water and drops into the condensate holding tank- this can then be drained off at a later stage.The water-free oil falls to the bottom of the vacuumchamber and is passed through a final particulateremoval filter by a heavy duty lube oil pump.Clean dry oil re-enters the reservoir/system via theoutlet port.250% Bearing Life Remaining200150100500% Water In Oil254Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Applications for PVS Portable Purification SystemsPaper mills- Dryer lubrication- <strong>Hydraulic</strong>- Compressor lubrication- CalendersSteel mills- Bearing lubrication- Continuous casters- Press roll lubricationPower generation- Turbine oil- Transformer oil- EHC systemsIndustrial/aerospace- Test stands- Machine toolsAir CooledCondenserCondensateholding tankVacuum pumpCaster wheelsLow watt densityheaterSelf diagnosingcontrols include:ProgrammablethermostatReverse pole switch/phase fail% RH displayLiquid level sightglassForklift guidesVariable flow circuitMoisture sensorCondensate holding tankCompact sizeForklift guidesLifting eyesProgrammable thermostatAutomatic operationFeatures Advantages BenefitsReverse pole switch/phase failHigh temperature safety circuitCircuit breakers utilised inelectrical panelAvailable with EPR seals andstainless steelSolid state heater contacterAllows oil to heat to requiredtemperature quicklyReal-time water content indicationCaptures removed water/solventsLarge enough to provide long serviceintervalSmallest envelope in the industryEase of portabilityProvides safe and secure method tolift unitMaintains oil within 1°CPrevents overheating oilUnattended useChange motor rotation for different powersource locationsShuts down heater if primarycontacters failOil can never exceed 120°C (250°F)No fuses to replaceSimple diagnosticsPhosphate ester compatibleLonger more reliable service lifeStarts removing water quicklyIndicates when safe water content levelis obtainedEliminate potential hazard of exhaustingto atmosphereReduced maintenance costsFits through doorways and downnarrow aislesIncreased useEmployee safetyEasily transportedUnattended operationIncreases oil lifeReduced labour costsIncreased running timeFlexibility, less maintenancePrevents incorrect rotationPrevents system damageWorker safetyFewer spare parts, increased uptimeReduced maintenanceSpecifically designed for applicationReduced downtime255Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS SeriesPortable Purification SystemsTypical PerformancePotentialcontaminantPVSperformanceTank size227 litres (50 gallons)Solid particulateISO cleanliness code*14/13/10 attainableRun time62 minutesWaterRemoves 100% of free water,80-90% of dissolved water.Parker modelPVS 600 (37.9 l/min)AirGases* When utilising 2Q mediaRemoves 100% of free air,90% of dissolved air.Removes 100% of free gases,90% of dissolved gases.PVS (Vacuum dehydration)compared to other technologiesCentrifuge units – Removes free water only; has difficultybreaking stable emulsions; larger envelope dimensions butlower flows; higher initial and operating costs.Desiccant units – Have limited water removal capability dueto absorbing material; only removes air ingressed particles;expensive compared to the volume of water removed.Coalescer units – Removes free water only; has difficultybreaking stable emulsions; does not work well in viscous fluids(>23cSt); much larger in size compared to PVS.Water content (ppm) Start: 10,000 PPM (1.0%)Stop: 50 PPM(0.005%)Contamination level Start: ISO 21/18/16Stop: ISO 16/14/11StartStopEstimated Water Removal Time5000 ppm (0.5%) to 150 ppm (0.015%)Reservoir Size (Litres)0 5000 10000 15000 20000 25000 3000012035000Total Hours10080604020PVS185PVS600PVS 1200PVS 1800PVS 270000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000Reservoir Size (Gallons)256Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS 185Portable Purification SystemsSpecificationFlow rate:19 lpm (4.2 gpm).Height:1651mm (65”).Width:825.5mm (32.5”).Length:1206.5mm (47.5”).Weight:294.8 kg (650 lbs).Seal material:Fluorocarbon (EPR opt.).Condensate tank:15.5 ltrs (3.4 gals).Dispersal elements:1.Minimum operating capacity:18.9 ltrs (4.2 gals).Vacuum (max):25 In/Hg.Viscosity (max):108 cSt (500sus) – disposable.460 cSt (2150 sus) – packedtower.Outlet pressure (max):4.1 bar (60 psi).Ports:3 /4” JIC (male) inlet.3 /4” JIC (male) outlet.FLA (full load amps):15-41 amps.(Depending on voltage used).Replacement elementsStandard CorelessParticulate 80CN-2PVS 185 flow diagram2QE (2 micron) 936716Q5QE (5 micron) 936717Q10QE (10 micron) 936718Q20QE (20 micron) 936719QOption CorelessParticulate IL8-32QE (2 micron) 933734Q5QE (5 micron) 933612Q10QE (10 micron) 933735Q20QE (20 micron) 933736QCorelessHeaterDisposable 933180(Coalescing)Packed tower 933553(Cleanable)257Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS 600Portable Purification SystemsSpecificationFlow rate:38 lpm (8.3 gpm).Height:1638.3mm (64.5”).Width:1117.6mm (44”).Length:1549.4mm (61”).Weight:408.2 kg (900 lbs).Seal material:Fluorocarbon (EPR opt.).Condensate tank:15.5 ltrs (3.4 gals).Dispersal elements:2.Minimum operating capacity:22.7 ltrs (5.0 gals).Vacuum (max):25 In/Hg.Viscosity (max):108 cSt (500sus) – disposable.460 cSt (2150 sus) – packedtower.Outlet pressure (max):4.1 bar (60 psi).Ports:1” JIC (male) inlet.1” JIC (male) outlet.FLA (full load amps):24-38 amps.(Depending on options& voltages).Replacement elementsStandard CorelessParticulate 80CN-2PVS 600 flow diagram2QE (2 micron) 936716Q5QE (5 micron) 936717Q10QE (10 micron) 936718Q20QE (20 micron) 936719QOption CorelessParticulate IL8-32QE (2 micron) 933734Q5QE (5 micron) 933612Q10QE (10 micron) 933735Q20QE (20 micron) 933736QCorelessDisposable 933180(Coalescing)Packed tower 933553(Cleanable)258Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS 1200Portable Purification SystemsSpecificationFlow rate:76 lpm (16.7 gpm).Height:1651mm (65”).Width:1117.6mm (44”).Length:1549.4mm (61”).Weight:703.1 kg (1550 lbs).Seal material:Fluorocarbon (EPR opt.).Condensate tank:31.4 ltrs (6.9 gals).Dispersal elements:4.Minimum operating capacity:41.6 ltrs (9.1 gals).Vacuum (max):25 In/Hg.Viscosity (max):108 cSt (500sus) – disposable.460 cSt (2150 sus) – packedtower.Outlet pressure (max):4.1 bar (60 psi).Ports:1 1 /2” NPTF inlet.1” JIC (male) outlet.FLA (full load amps):30-48 amps.(Depending on options& voltages).Replacement elementsDispersalDisposable 933180(coalescing)Packed tower 933553(cleanable)02QE05QE10QE20QECoreless IL8-3933734Q933612Q933735Q933736QPVS 1200 flow diagram259Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS 1800Portable Purification SystemsSpecificationFlow rate:114 lpm (25 gpm).Height:1651mm (65”).Width:1066.8mm (42”).Length:1943.1mm (76.5”).Weight:1156.7 kg (2550 lbs).Seal material:Fluorocarbon (EPR opt.).Condensate tank:31.4 ltrs (6.9 gals).Dispersal elements:8.Minimum operating capacity:68.1 ltrs (14.98 gals).Vacuum (max):25 In/Hg.Viscosity (max):108 cSt (500sus) – disposable.460 cSt (2150 sus) – packedtower.Outlet pressure (max):4.1 bar (60 psi).Ports:2” NPTF inlet.1.5” JIC (male) outlet.FLA (full load amps):40-65 amps @ 460 V/60hz.Replacement elementsDispersalDisposable 933180(coalescing)Packed tower 933553(cleanable)02QE05QE10QE20QECoreless IL8-3933734Q933612Q933735Q933736QPVS Specification Worksheet - Section 1Note: The following information will be required before a PVS order can be processed.1. Application..................................................................................................2. Fluid type......................................... Brand...............................................Grade .............................................. Specific Gravity................................3. Viscosity Min ........................... SUS/cSt @........................... °F/°CMax........................... SUS/cSt @........................... °F/°CNormal ...................... SUS/cSt @........................... °F/°C4. Contamination level Current ISO level ___ /___ /___Desired PPM level ___ /___ /___5. Water concentration Current ISO level........................Desired PPM level......................6. Suction Head Positive/Negative ......................... Ft./metres....................7. Operating distance ....................................... Ft./metres .........................8. System fluid operating temperature: ............................................. °F/°CIs there a cooler?..........................................................................9. Operating environment air temperature: (air cooled model)Min ....................................°F/°CMax ...................................°F/°CNormal...............................°F/°C260Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS 2700Portable Purification SystemsSpecificationFlow rate:170 lpm (37.4 gpm).Height:1651mm (65”).Width:1066.8mm (42”).Length:1943.1mm (76.5”).Weight:1156.7 kg (2550 lbs).Seal material:Fluorocarbon (EPR opt.).Condensate tank:31.4 ltrs (6.9 gals).Dispersal elements:8.Minimum operating capacity:68.1 ltrs (14.98 gals).Vacuum (max):25 In/Hg.Viscosity (max):108 cSt (500sus) – disposable.460 cSt (2150 sus) – packedtower.Outlet pressure (max):4.1 bar (60 psi).Ports:3” NPTF inlet.2” NPTF outlet.FLA (full load amps):50-70 amps @ 460 V/60hz.Replacement elementsDispersalDisposable 933180(coalescing)Packed tower 933553(cleanable)02QE05QE10QE20QECoreless IL8-3933734Q933612Q933735Q933736QPVS Specification Worksheet - Section 210. Water supply temperature: (liquid ring model)Min ....................................°F/°CMax ...................................°F/°CNormal...............................°F/°C11. Operating environment above/below sea level: ........................ Ft./metres12. Voltage Options: 230Vac, 3p, 60Hz (185,600)380Vac, 3p, 50Hz (185,600,1200,1800,2700)460Vac,3p,60Hz (185,600,1200,1800,2700)575vac, 3p 60Hz (185,600,1200,1800,2700)13. Available amperage:....................................................................................14. System volume: ..........................................................................................15. Special requirements: .......................................................................................................................................................................................................................................................................................................................16. Any previous filtration problems with application:........................................17. PVS model selected: ..................................................................................Specification sheet must be completed before order can be entered261Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PVS RangePortable Purification SystemsOrdering InformationProduct configuratorSelect the desired symbol (in the correct position) to construct a model code.Box 1-Box 2PVSBox 3600Box 4460Box 5DSBox 6DBox 75QBox 8-Box 912Box 10ACBox 11DFLBox 1Box 2Box 3Box 4SealsBasic assemblyFlow ratePower supplyDescriptionCodeDescriptionCodeDescriptionCodeModelDescriptionCodeFluorocarbonEPRNoneE8Portable Purification SystemPVS19 lpm (4.2 gpm)38 lpm (8.3 gpm)76 lpm (16.7 gpm)185600120018002700185600380VAC, 3P, 50HZ460VAC, 3P, 60HZ575VAC, 3P, 60HZ380VAC, 3P, 50HZ460VAC, 3P, 60HZ550VAC, 3P, 60HZ380460550380460550380VAC, 3P, 50HZ3801200460VAC, 3P, 60HZ460550VAC, 3P, 60HZ550380VAC, 3P, 50HZ3801800460VAC, 3P, 60HZ460550VAC, 3P, 60HZ550380VAC, 3P, 50HZ3802700460VAC, 3P, 60HZ460550VAC, 3P, 60HZ550Box 5Box 6Box 7Vacuum pumpDispersal elementParticulate element μm (c)Pressure settingCodeDescriptionCodeDescriptionCodeDry sealedDSDisposable (coalescing)D4 micron Microglass III2QLiquid ringLRPacked tower (cleanable –for use with viscious orhighly contaminated fluids)P6 micron Microglass III10 micron Microglass III20 micron Microglass III5Q10Q20QNote: Above elements are rated for Beta 200+ (99.5% efficiency)Box 8 Box 9Box 10<strong>Filter</strong> housingHeaterDescription80CN-2IL8 (39”) Ecoglass III upgradeCodeNoneENote: IL8 option is available on 185 and 600models, and is standard on 1200 models andlargerModel185600120018002700Description12 KW (3 phase)12 KW24 KW24 KW36 KW48 KWCode121224243648DescriptionAir cooledLiquid cooledCondenserCodeBox 11OptionsDescriptionCodePneumatic wheelsPWAuto condensate drainACDDirty filter lightDFLResetable hour meterRHMSight flow indicatorSFIInlet control valveICVCE markedCECSA markedCSAExplosion proofEXP(Class I, <strong>Division</strong> II, Zone I and II)Note: For the icountPD option consult ParkerFiltrationNote 1: Contact parker for part number profile availability262Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangeOver 30,000 reasonsto choose PAR FITQuality interchange elementswith a proven recordThe Parfit range offers end users,maintenance engineers andmanufacturers a range of over 30,000Parker Parfit quality interchangeelements using Microglass llland Ecoglass lll media. Reducestockholding, cut costs and ensurereliable and quality filter performance.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• PAR FIT elements are manufactured to the same exactingstandards as Parker original elements using Microglass IIIand Ecoglass III media.• Quality backed by Parker’s unrivalled technical resouces.• Reduce stockholding and costs by sourcing all yourreplacement elements from Parker.• Interchange elements for Pall, Hydac, Mahle, Internormen,MP Filtri, Donaldson and over 300 more manufacturers.• Cross reference information available for over 30,000 partnumbers.263Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangeSpecificationFeatures Advantages BenefitsMicroglass III replacement elementsCoreless Ecoglass III replacementelementsComplete performance data disclosureElements manufactured to exactingstandards of original elementsTypical Applications• Industrial power units• Mobile constructionequipment• Forestry equipment• Marine power plants• Agricultural equipment• Lorry mounted cranes• Waste management trucks• Wheeled loadersMulti-layered design producing high dirtholding capacity and high efficiencyWire support reduces pleat bunching andkeeps performance consistentNo metal content in elementOverall weight reduced by 50%Easy compaction of used elementsEco adapters availableAll pertinent information is provided in aneasy to compare formatPerformance guarantee as good if notbetter than original fitThere’s only one solutionWhen it comes to replacementhydraulic and marine filterelements there is only one solution:The PAR FIT interchangeablerange.With over 20,000 stocked, offthe shelf variations, there’s aPAR FIT element to fit mostsizes and makes of filters on mobile,construction, agricultural andindustrial plant.Great performance valueReliable performance throughoutelement lifeReduces downtime and maximizeselement lifeEnvironmentally friendly disposal byincinerationLower element replacement costsLower disposal costsRetrofit coreless design to housingsalready installedNo hidden deficienciesEasy selection of correct interchangepart numberDurable, rugged and reliableconstruction with high quality standardsEvery PAR FIT element ismanufactured in <strong>Europe</strong> to thehighest standards and is backed byour unrivalled technical supportand money back guarantees.That means that you can reducestockholdings, cut costs and be sureof the ultimate performance, withlong, trouble free operating life.PAR FIT filters are availablefrom ParkerStores and authoriseddistributors throughout <strong>Europe</strong>.• Lift truckswww.parker.com/parfitwww.parkerhfde.com/parfitHydac interchange element range• The latest interchange elements range added are for the latest Hydac “R”type elements.• Replacement sizes available are for Hydac: 0030, 0060, 0075, 0110,0160, 0165, 0240, 0330 0500, 0660, 0850, 0950, 1300, 1700 and 2600.• Featuring Fluroelastomer seals as standard for optimum performance.• Top and bottom end caps manufactured from glass reinforced nylon.• Top end cap includes integrated bypass assembly.• Bottom end cap features a bayonet locking lug for use with the re-useablecontamination retainer (Not supplied).• Elements are suitable for use with the following Hydac housings:RD, RFD, RFM, RFL, RFLD, NF, NFD and oil service units as well as manyOEM applications.264Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberArgo Replaces P2.0620-51 PR4474Argo Replaces P2.0923-01 PR4473Argo Replaces P2.0933-01 PR4461Argo Replaces P2.1217-12 PR4465Argo Replaces P2.1217-21 PR4466Argo Replaces P3.0510-00 PR4469Argo Replaces P3.0510-02 PR4475Argo Replaces P3.0920-11 PR4464Argo Replaces V2.1217-03 938194QArgo Replaces V2.1217-08 PR4467Argo Replaces V2.1217-36 PR4468Argo Replaces V3.0510-03 944074QArgo Replaces V3.0510-06 944075QArgo Replaces V3.0510-08 944076QArgo Replaces V3.0520-08 PR4476Argo Replaces V3.0607-06 PR4471Argo Replaces V3.0607-08 PR4472Argo Replaces V3.0723-08 944097QArgo Replaces V3.0933-08 944098QDonaldson Replaces P163322 944012QDonaldson Replaces P163323 944013QDonaldson Replaces P163324 944014QDonaldson Replaces P163405 944015QDonaldson Replaces P163419 944016QDonaldson Replaces P163496 944017QDonaldson Replaces P164375 944022QDonaldson Replaces P164378 944023QDonaldson Replaces P164381 944024QDonaldson Replaces P164384 944025QDonaldson Replaces P164996 924732Donaldson Replaces P165104 924493Donaldson Replaces P165106 924489Donaldson Replaces P165114 924735Donaldson Replaces P165332 944027QDonaldson Replaces P165335 944028QDonaldson Replaces P165338 944029QDonaldson Replaces P165354 944030QDonaldson Replaces P165569 944035QDonaldson Replaces P165659 944036QDonaldson Replaces P165672 944037QDonaldson Replaces P165675 944038QDonaldson Replaces P165705 944039QDonaldson Replaces P165786-24 922787Donaldson Replaces P165879 926170Donaldson Replaces P166204 908649Donaldson Replaces P169430 926541Donaldson Replaces P169553 924451Donaldson Replaces P169554 924449Donaldson Replaces P169555 924450Donaldson Replaces P169556 924452Donaldson Replaces P169558 924793Donaldson Replaces P169559 924791Donaldson Replaces P169560 924792Donaldson Replaces P170061 924467Donaldson Replaces P170063 908648Donaldson Replaces P170065 922625Donaldson Replaces P170066 922624<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberDonaldson Replaces P170090 926372Donaldson Replaces P170092 926326Donaldson Replaces P170094 926327Donaldson Replaces P170095 907233Donaldson Replaces P170096 907234Donaldson Replaces P170098 924588Donaldson Replaces P170099 932635QDonaldson Replaces P170481 930226Donaldson Replaces P170906 944040QDonaldson Replaces P171273 944042QDonaldson Replaces P171274 944043QDonaldson Replaces P171275 944044QDonaldson Replaces P171276 944045QDonaldson Replaces P173616 909297Donaldson Replaces P176565 944032QDonaldson Replaces P176566 944033QDonaldson Replaces P176567 944047QDonaldson Replaces P550251 927736Donaldson Replaces P551551 921999Donaldson Replaces P551553 925023Donaldson Replaces P556005 934476Donaldson Replaces SP0715 943999QEaton Vickers Replaces 737842 930091Eaton Vickers Replaces 737846 930110Eaton Vickers Replaces V3045B1H10 933576QEaton Vickers Replaces V3045V1H03 933577QEaton Vickers Replaces V3045V2H03 933578QEaton Vickers Replaces V3045V2H05 932620QEaton Vickers Replaces V3045V2H10 933579QEaton Vickers Replaces V30PV1C03 932622QEaton Vickers Replaces V30PV1C05 932623QEaton Vickers Replaces V30PV1C10 932624QEaton Vickers Replaces V30PV1C20 933135QEaton Vickers Replaces V30PV1H03 932625QEaton Vickers Replaces V30PV1H03 933580QEaton Vickers Replaces V30PV1H05 932626QEaton Vickers Replaces V30PV1H10 932627QEaton Vickers Replaces V30PV1H10 933581QEaton Vickers Replaces V30PV2C03 932628QEaton Vickers Replaces V30PV2C05 932629QEaton Vickers Replaces V30PV2C10 932630QEaton Vickers Replaces V30PV2C20 933136QEaton Vickers Replaces V30PV2H03 932631QEaton Vickers Replaces V30PV2H03 933582QEaton Vickers Replaces V30PV2H05 932632QEaton Vickers Replaces V30PV2H10 932633QEaton Vickers Replaces V30PV2H10 933583QEaton Vickers Replaces VCF2B1C05 924452QEaton Vickers Replaces VCF2B1C10 924453QEaton Vickers Replaces VCF2B2C10 934265QEaton Vickers Replaces VCF2V1C05 925039QEaton Vickers Replaces VCF2V1C10 925040QEaton Vickers Replaces VCF2V2C05 935534QEaton Vickers Replaces VCF2V2C10 935535QEaton Vickers Replaces VRF2B1C03 932686QEaton Vickers Replaces VRF2B1C05 932687QEaton Vickers Replaces VRF2B1C10 932688Q265Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberEaton Vickers Replaces VRF2B1C20 933116QEaton Vickers Replaces VRF2B2C03 932692QEaton Vickers Replaces VRF2B2C05 932693QEaton Vickers Replaces VRF2B2C10 932694QEaton Vickers Replaces VRF2B2C20 933117QEaton Vickers Replaces VRF2V1C03 932689QEaton Vickers Replaces VRF2V1C05 932690QEaton Vickers Replaces VRF2V1C10 932691QEaton Vickers Replaces VRF2V1C20 933118QEaton Vickers Replaces VRF2V2C03 932695QEaton Vickers Replaces VRF2V2C05 932696QEaton Vickers Replaces VRF2V2C10 932697QEaton Vickers Replaces VRF2V2C20 933119QEppensteiner Replaces 1.0145 H6SL-A-000-P 936789QEppensteinerReplaces 1.561 H3SL-C-000-P(S) 936736QEppensteiner Replaces 1.561 H6SL-A-000-P 936869QEppensteiner Replaces 1.561 H6SL-C-000-P 936816QEppensteiner Replaces 1-0145 H3SL-A-000-P 936737QEppensteiner Replaces 2.0030 H6SL-A-000-P 938155QEppensteiner Replaces 2.0030 H6SL-B00-0-P 936784QEppensteiner Replaces 2.140H6SL-C-000-P 936787QEppensteiner Replaces 2.22 H6SL-C-000-P 936786QEppensteiner Replaces 2.56G2525-C-000-PS 936785QEppensteiner Replaces 9.05242 P25-S00-0-PX 944090QFiltration Products Corp Replaces FPL1270B05G 935202Filtration Products Corp Replaces FPL1370B05G 935210Filtration Products Corp Replaces FPL2270B05G 935206Filtration Products Corp Replaces FPL2370B05G 935214Fleetguard Replaces HF7808 982131Fleetguard Replaces HF7809 983061Hydac Replaces 0015D010BN4HC 938156QHydac Replaces 0030D003BH4HC PR3035QHydac Replaces 0030D003BN4HC PR3031QHydac Replaces 0030D005BH4HC PR3036QHydac Replaces 0030D005BN4HC PR3032QHydac Replaces 0030D010BH4HC PR3037QHydac Replaces 0030D010BN4HC PR3033QHydac Replaces 0030D020BH4HC PR3038QHydac Replaces 0030D020BN4HC PR3034QHydac Replaces 0030D025W 939159QHydac Replaces 0030R003BN4HC 938253QHydac Replaces 0030R005BN4HC 938254QHydac Replaces 0030R010BN4HC 938255QHydac Replaces 0030R020BN4HC 938256QHydac Replaces 0035D020BN4HC 937058QHydac Replaces 0060D003BH4HC PR3064QHydac Replaces 0060D003BN4HC PR3056QHydac Replaces 0060D005BH4HC PR3065QHydac Replaces 0060D005BN4HC PR3057QHydac Replaces 0060D010BH4HC PR3066QHydac Replaces 0060D010BN4HC PR3058QHydac Replaces 0060D020BH4HC PR3067QHydac Replaces 0060D020BN4HC PR3059QHydac Replaces 0060R003BN4HC 938257QHydac Replaces 0060R005BN4HC 938258QHydac Replaces 0060R010BN4HC 938259QHydac Replaces 0060R020BN4HC 938260Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberHydacReplaces 0075R003BN4HC938261QHydacReplaces 0075R005BN4HC938262QHydacReplaces 0075R010BN4HC938263QHydacReplaces 0075R020BN4HC938264QHydac Replaces 0095D010BN4HC 938154QHydacReplaces 0110D003BH4HCPR3093QHydacReplaces 0110D003BN4HCPR3085QHydacReplaces 0110D005BH4HCPR3094QHydacReplaces 0110D005BN4HCPR3086QHydacReplaces 0110D010BH4HCPR3095QHydacReplaces 0110D010BN4HCPR3087QHydacReplaces 0110D020BH4HCPR3096QHydacReplaces 0110D020BN4HCPR3088QHydacReplaces 0110R003BN4HC938265QHydacReplaces 0110R005BN4HC938266QHydacReplaces 0110R010BN4HC938267QHydacReplaces 0110R020BN4HC938268QHydacReplaces 0140D003BH4HC937059QHydacReplaces 0140D003BN4HC937060QHydacReplaces 0140D005BH4HC937061QHydacReplaces 0140D005BN4HC937062QHydacReplaces 0140D010BH4HC937063QHydacReplaces 0140D010BN4HC937064QHydacReplaces 0140D020BH4HC937065QHydacReplaces 0140D020BN4HC937066QHydacReplaces 0160D003BH4HCPR3122QHydacReplaces 0160D003BN4HCPR3114QHydacReplaces 0160D005BH4HCPR3123QHydacReplaces 0160D005BN4HCPR3115QHydacReplaces 0160D010BH4HCPR3124QHydacReplaces 0160D010BN4HCPR3116QHydacReplaces 0160D020BH4HCPR3125QHydacReplaces 0160D020BN4HCPR3117QHydacReplaces 0160R003BN4HC938269QHydacReplaces 0160R005BN4HC938270QHydacReplaces 0160R010BN4HC938271QHydacReplaces 0160R020BN4HC938272QHydacReplaces 0165R003BN4HC938273QHydacReplaces 0165R005BN4HC938274QHydacReplaces 0165R010BN4HC938275QHydacReplaces 0165R020BN4HC938276QHydacReplaces 0240D003BH4HCPR3151QHydacReplaces 0240D003BN4HCPR3143QHydacReplaces 0240D005BH4HCPR3152QHydacReplaces 0240D005BN4HCPR3144QHydacReplaces 0240D010BH4HCPR3153QHydacReplaces 0240D010BN4HCPR3145QHydacReplaces 0240D020BH4HCPR3154QHydacReplaces 0240D020BN4HCPR3146QHydac Replaces 0240D200WHC 938195QHydacReplaces 0240R003BN4HC938277QHydacReplaces 0240R005BN4HC938278QHydacReplaces 0240R010BN4HC938279QHydacReplaces 0240R020BN4HC938280QHydacReplaces 0330D003BH4HCPR3180QHydacReplaces 0330D003BN4HCPR3172QHydacReplaces0330D005BH4HCPR3181Q266Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberHydac Replaces 0330D005BN4HC PR3173QHydac Replaces 0330D010BH4HC PR3182QHydac Replaces 0330D010BN4HC PR3174QHydac Replaces 0330D020BH4HC PR3183QHydac Replaces 0330D020BN4HC PR3175QHydac Replaces 0330R003BN4HC 938281QHydac Replaces 0330R005BN4HC 938282QHydac Replaces 0330R010BN4HC 938283QHydac Replaces 0330R020BN4HC 938284QHydac Replaces 0480D003BH4HC 937067QHydac Replaces 0480D003BN4HC 937068QHydac Replaces 0480D005BH4HC 937069QHydac Replaces 0480D005BN4HC 937070QHydac Replaces 0480D010BH4HC 937071QHydac Replaces 0480D010BN4HC 937072QHydac Replaces 0480D020BH4HC 937073QHydac Replaces 0480D020BN4HC 937074QHydac Replaces 0480R003BN4HC 944058QHydac Replaces 0480R005BN4HC 944059QHydac Replaces 0480R010BN4HC 944060QHydac Replaces 0480R020BN4HC 944061QHydac Replaces 0500D003BH4HC 937075QHydac Replaces 0500D003BN4HC 937076QHydac Replaces 0500D005BH4HC 937077QHydac Replaces 0500D005BN4HC 937078QHydac Replaces 0500D010BH4HC 937079QHydac Replaces 0500D010BN4HC 937080QHydac Replaces 0500D020BH4HC 937081QHydac Replaces 0500D020BN4HC 937082QHydac Replaces 0500R003BN4HC 938285QHydac Replaces 0500R005BN4HC 938286QHydac Replaces 0500R010BN4HC 938287QHydac Replaces 0500R020BN4HC 938288QHydac Replaces 0660D003BH4HC PR3209QHydac Replaces 0660D003BN4HC PR3201QHydac Replaces 0660D005BH4HC PR3210QHydac Replaces 0660D005BN4HC PR3202QHydac Replaces 0660D010BH4HC PR3211QHydac Replaces 0660D010BN4HC PR3203QHydac Replaces 0660D020BH4HC PR3212QHydac Replaces 0660D020BN4HC PR3204QHydac Replaces 0660R003BN4HC 938289QHydac Replaces 0660R005BN4HC 938290QHydac Replaces 0660R010BN4HC 938291QHydac Replaces 0660R020BN4HC 938292QHydac Replaces 0850R003BN4HC 938293QHydac Replaces 0850R005BN4HC 938294QHydac Replaces 0850R010BN4HC 938295QHydac Replaces 0850R020BN4HC 938296QHydac Replaces 0950R003BN4HC 938297QHydac Replaces 0950R005BN4HC 938298QHydac Replaces 0950R010BN4HC 938299QHydac Replaces 0950R020BN4HC 938300QHydac Replaces 1300R003BN4HC 938301QHydac Replaces 1300R005BN4HC 938302QHydac Replaces 1300R010BN4HC 938303QHydac Replaces 1300R020BN4HC 938304Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberHydac Replaces 1700R003BN4HC 938305QHydac Replaces 1700R005BN4HC 938306QHydac Replaces 1700R010BN4HC 938307QHydac Replaces 1700R020BN4HC 938308QHydac Replaces 2600R003BN4HC 938310QHydac Replaces 2600R005BN4HC 938311QHydac Replaces 2600R010BN4HC 938312QHydac Replaces 2600R020BN4HC 938313QHydac Replaces 0100RK010BN4HC 944091QHydac Replaces 0100RK015BN4HC 944092QHydac Replaces 1320D010BH4HC 941693Internormen Replaces 01.E 170.10VG.30.E.V 938232QInternormen Replaces 01.E 170.10VG.HR.E.V 938172QInternormen Replaces 01.E 170.25VG.30.E.V 938233QInternormen Replaces 01.E 170.25VG.HR.E.V 938173QInternormen Replaces 01.E 170.3VG.30.E.V 938230QInternormen Replaces 01.E 170.3VG.HR.E.V 938170QInternormen Replaces 01.E 170.6VG.30.E.V 938231QInternormen Replaces 01.E 170.6VG.HR.E.V 938171QInternormen Replaces 01.E 210.10VG.16.S.V 938188QInternormen Replaces 01.E 210.25VG.16.S.V 938189QInternormen Replaces 01.E 210.3VG.16.S.V 938186QInternormen Replaces 01.E 210.6VG.16.S.V 938187QInternormen Replaces 01.E 30.10VG.30.E.V 938244QInternormen Replaces 01.E 30.25VG.30.E.V 938245QInternormen Replaces 01.E 30.3VG.30.E.V 938242QInternormen Replaces 01.E 30.6VG.30.E.V 938243QInternormen Replaces 01.E 320.10VG.16.S.V 938168QInternormen Replaces 01.E 320.25VG.16.S.V 938169QInternormen Replaces 01.E 320.3VG.16.S.V 938166QInternormen Replaces 01.E 320.6VG.16.S.V 938167QInternormen Replaces 01.E 360.10VG.30.E.V 938220QInternormen Replaces 01.E 360.10VG.HR.E.V 938176QInternormen Replaces 01.E 360.25VG.30.E.V 938221QInternormen Replaces 01.E 360.25VG.HR.E.V 938177QInternormen Replaces 01.E 360.3VG.30.E.V 938218QInternormen Replaces 01.E 360.3VG.HR.E.V 938174QInternormen Replaces 01.E 360.6VG.30.E.V 938219QInternormen Replaces 01.E 360.6VG.HR.E.V 938175QInternormen Replaces 01.E 425.10VG.16.E.V 938236QInternormen Replaces 01.E 425.10VG.16.S.V 938192QInternormen Replaces 01.E 425.25VG.16.E.V 938237QInternormen Replaces 01.E 425.25VG.16.S.V 938193QInternormen Replaces 01.E 425.3VG.16.E.V 938234QInternormen Replaces 01.E 425.6VG.16.E.V 938235QInternormen Replaces 01.E 450.10VG.30.E.V 938224QInternormen Replaces 01.E 450.10VG.HR.E.V 938216QInternormen Replaces 01.E 450.25VG.30.E.V 938225QInternormen Replaces 01.E 450.25VG.HR.E.V 938217QInternormen Replaces 01.E 450.3VG.30.E.V 938222QInternormen Replaces 01.E 450.3VG.HR.E.V 938214QInternormen Replaces 01.E 450.6VG.30.E.V 938223QInternormen Replaces 01.E 450.6VG.HR.E.V 938215QInternormen Replaces 01.E 631.10VG.16.S.V 938212QInternormen Replaces 01.E 631.25VG.16.S.V 938213QInternormen Replaces 01.E 631.3VG.16.S.V 938210QInternormen Replaces 01.E 631.6VG.16.S.V 938211Q267Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberInternormen Replaces 01.E 90.10VG.HR.E.V 938240QInternormen Replaces 01.E 90.25VG.HR.E.V 938241QInternormen Replaces 01.E 90.3VG.HR.E.V 938238QInternormen Replaces 01.E 90.6VG.HR.E.V 938239QInternormen Replaces 01.E.240.10VG.HR.E.V 938228QInternormen Replaces 01.E.240.25VG.HR.E.V 938229QInternormen Replaces 01.E.240.3VG.HR.E.V 938226QInternormen Replaces 01.E.240.6VG.HR.E.V 938227QInternormen Replaces 01.E.425.3VG.16.S.V 938190QInternormen Replaces 01.E.425.6VG.16.S.V 938191QInternormen Replaces 01.NBF 25-40.3VL.B.P 938251QInternormen Replaces 01.NBF 55-85.3VL.B.P 938252QInternormenReplaces 01.NL 100.10VG.30.E.V 938184QInternormenReplaces 01.NL 100.25VG.30.E.V 938185QInternormen Replaces 01.NL 100.3VG.30.E.V 938182QInternormen Replaces 01.NL 100.6VG.30.E.V 938183QInternormen Replaces 01.NL 63.10VG.30.E.V 938180QInternormen Replaces 01.NL 63.25VG.30.E.V 938181QInternormen Replaces 01.NL 63.3VG.30.E.V 938178QInternormen Replaces 01.NL 63.6VG.30.E.V 938179QInternormenReplaces 01.NL.40.10VG.HR.E.V 938248QInternormenReplaces 01.NL.40.25VG.HR.E.V 938249QInternormen Replaces 01.NL.40.3VG.HR.E.V 938246QInternormen Replaces 01.NL.40.6VG.HR.E.V 938247QInternormen Replaces 01.E 120.25VG.16.S.V 939723QInternormen Replaces 01.E 30.25VG.HR.E.V 939736QInternormen Replaces 01.E 330.10VG.16.S.V 939727QInternormen Replaces 01.E 41.10VG.16.S.V 939728QInternormen Replaces 01.E 90.250G.HR.E.P. 939738QInternormen Replaces 01.E 900.10VG.30.E.V 939734QInternormen Replaces 01.E 950.10VG.10.S.V 939725QInternormen Replaces 01.E 950.25P.10.S.V 939732QInternormen Replaces 01.N 100.80G.16.E.V 939726QInternormen Replaces 01.NL 40.25VG.30.E.V 939730QInternormen Replaces 01.NL.630.25VG.30.S.V 939737QInternormen Replaces 01.TS 210.25VG.B 939729QMahle Replaces 852 126 Mic 10 PR4381QMahle Replaces 852 127 Sm vst 3 937104QMahle Replaces 852 127 SMX 10 937100QMahle Replaces 852 127 SMX 25 937101QMahle Replaces 852 127 SMX 3 937102QMahle Replaces 852 127 SMX VST 10 937103QMahle Replaces 852 127 SMX VST 3 937099QMahle Replaces 852 435 SM 10 PR4375QMahle Replaces 852 435 SM 25 PR4374QMahle Replaces 852 436 SM 10 PR4377QMahle Replaces 852 436 SM 25 PR4376QMahle Replaces 852 439 Sm 10 937105QMahle Replaces 852 519 Mic 10 937106QMahle Replaces 852 519 Sm L 937107QMahle Replaces 852 690 Sm 10 937108QMahle Replaces 852 760 Sm 10 937109QMahle Replaces 852 760 Sm 25 937110QMahle Replaces 852 761 Mic 10 PR4378QMahle Replaces 852 761 SM 10 PR4380QMahle Replaces 852 761 SM 25 PR4379QMahle Replaces Pi1005Mic25 PR2829Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMahle Replaces Pi1008Mic25 PR2837QMahle Replaces Pi1011Mic25 PR2845QMahle Replaces Pi1015Mic25 PR2853QMahle Replaces PI1030MIC25 PR2861QMahle Replaces Pi1045Mic25 PR2869QMahle Replaces Pi1105Mic10 PR2828QMahle Replaces Pi1108Mic10 PR2836QMahle Replaces Pi1111Mic10 PR2844QMahle Replaces Pi1115Mic10 PR2852QMahle Replaces Pi1130Mic10 PR2860QMahle Replaces Pi1145Mic10 PR2868QMahle Replaces Pi21004DNSM-X3 PR4522QMahle Replaces Pi21006DNSM-X3 PR4526QMahle Replaces Pi21010DNSM-X3 PR4530QMahle Replaces Pi21016DNSM-X3 PR4534QMahle Replaces Pi21025DNSM-X3 PR4538QMahle Replaces Pi21040DNSM-X3 PR4542QMahle Replaces Pi21040RNSM-X03 PR4508QMahle Replaces Pi2105 SMX 3 PR2830QMahle Replaces Pi21063RNSM-X03 PR4512QMahle Replaces Pi2108SMX3 PR2838QMahle Replaces Pi21100RNSM-X03 PR4516QMahle Replaces Pi2111SMX3 PR2846QMahle Replaces Pi2115SMX3 PR2854QMahle Replaces Pi2130SMX3 PR2862QMahle Replaces Pi2145SMX3 PR2870QMahle Replaces Pi22010RNSM-X06 PR4499QMahle Replaces Pi22016RNSM-X06 PR4502QMahle Replaces Pi22025RNSM-X06 PR4505QMahle Replaces Pi22040RNSM-X06 PR4509QMahle Replaces Pi2205SMXVST3 PR2833QMahle Replaces Pi22063RNSM-X06 PR4513QMahle Replaces Pi2208SMXVST3 PR2841QMahle Replaces Pi22100RNSM-X06 PR4517QMahle Replaces Pi2211SMXVST3 PR2849QMahle Replaces Pi2215SMXVST3 PR2857QMahle Replaces Pi2230SMXVST3 PR2865QMahle Replaces Pi2245SMXVST3 PR2873QMahle Replaces Pi23004DNSM-X10 PR4523QMahle Replaces Pi23006DNSM-X10 PR4527QMahle Replaces Pi23010DNSM-X10 PR4531QMahle Replaces Pi23010RNSM-X10 PR4500QMahle Replaces Pi23016DNSM-X10 PR4535QMahle Replaces Pi23016RNSM-X10 PR4503QMahle Replaces Pi23025DNSM-X10 PR4539QMahle Replaces Pi23025RNSM-X10 PR4506QMahle Replaces Pi23040DNSM-X10 PR4543QMahle Replaces Pi23040RNSM-X10 PR4510QMahle Replaces Pi23063RNSM-X10 PR4514QMahle Replaces Pi23100RNSM-X10 PR4518QMahle Replaces Pi25010RNSM-X25 PR4501QMahle Replaces Pi25016RNSM-X25 PR4504QMahle Replaces Pi25025RNSM-X25 PR4507QMahle Replaces Pi25040RNSM-X25 PR4511QMahle Replaces Pi25063RNSM-X25 PR4515QMahle Replaces Pi25100RNSM-X25 PR4519QMahle Replaces Pi3105 SMX 10 PR2831Q268Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMahle Replaces Pi3108 SMX 10 PR2839QMahle Replaces Pi3111 SMX 10 PR2847QMahle Replaces Pi3115 SMX10 PR2855QMahle Replaces Pi3130 SMX10 PR2863QMahle Replaces Pi3145 SMX10 PR2871QMahle Replaces Pi3205 SMXVST10 PR2834QMahle Replaces Pi3208 SMXVST10 PR2842QMahle Replaces Pi3211 SMXVST10 PR2850QMahle Replaces Pi3215 SMXVST10 PR2858QMahle Replaces Pi3230 SMXVST10 PR2866QMahle Replaces Pi3245 SMXVST10 PR2874QMahle Replaces Pi4105 SMX25 PR2832QMahle Replaces Pi4108 SMX25 PR2840QMahle Replaces Pi4111 SMX25 PR2848QMahle Replaces Pi4115 SMX25 PR2856QMahle Replaces Pi4130 SMX25 PR2864QMahle Replaces Pi4145 SMX25 PR2872QMahle Replaces Pi4205 SMXVST25 PR2835QMahle Replaces Pi4208 SMXVST25 PR2843QMahle Replaces Pi4211 SMXVST25 PR2851QMahle Replaces Pi4215 SMXVST25 PR2859QMahle Replaces Pi4230 SMXVST25 PR2867QMahle Replaces Pi4245 SMXVST25 PR2875QMahle Replaces Pi71004DN SMXVST3 PR4520QMahle Replaces Pi71006DN SMXVST3 PR4524QMahle Replaces Pi71010DN SMXVST3 PR4528QMahle Replaces Pi71016DN SMXVST3 PR4532QMahle Replaces Pi71025DN SMXVST3 PR4536QMahle Replaces Pi71040DN SMXVST3 PR4540QMahleReplaces Pi73004DN SMXVST10 PR4521QMahleReplaces Pi73006DN SMXVST10 PR4525QMahleReplaces Pi73010DN SMXVST10 PR4529QMahleReplaces Pi73016DN SMXVST10 PR4533QMahleReplaces Pi73025DN SMXVST10 PR4537QMahleReplaces Pi73040DN SMXVST10 PR4541QMahle Replaces 852 125 SMX 10 939735QMP Filtri Replaces CSG-50-A10-A 928763MP Filtri Replaces CSG-50-A25-A 928764MP Filtri Replaces CU025A03VN 943793QMP Filtri Replaces CU025A06VN 943794QMP Filtri Replaces CU025A10VN 943795QMP Filtri Replaces CU025A25VN 943796QMP Filtri Replaces CU025M25VN 943796QMP Filtri Replaces CU025P10VN 943796QMP Filtri Replaces CU025P25VN 943796QMP Filtri Replaces CU040A03VN 943797QMP Filtri Replaces CU040A06VN 943798QMP Filtri Replaces CU040A10VN 943799QMP Filtri Replaces CU040A25VN 943800QMP Filtri Replaces CU040M25VN 943800QMP Filtri Replaces CU040P10VN 943800QMP Filtri Replaces CU040P25VN 943800QMP Filtri Replaces CU100A03VN 943801QMP Filtri Replaces CU100A06VN 943802QMP Filtri Replaces CU100A10VN 943803QMP Filtri Replaces CU100A25VN 943804QMP Filtri Replaces CU100M25VN 943804Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMP Filtri Replaces CU100P10VN 943804QMP Filtri Replaces CU100P25VN 943804QMP Filtri Replaces CU200A03VN 943805QMP Filtri Replaces CU200A06VN 943806QMP Filtri Replaces CU200A10VN 943807QMP Filtri Replaces CU200A25VN 943808QMP Filtri Replaces CU200M25VN 943808QMP Filtri Replaces CU200P10VN 943808QMP Filtri Replaces CU200P25VN 943808QMP Filtri Replaces CU250A03VN 943809QMP Filtri Replaces CU250A06VN 943810QMP Filtri Replaces CU250A10VN 943811QMP Filtri Replaces CU250A25VN 943812QMP Filtri Replaces CU250M25VN 943812QMP Filtri Replaces CU250P10VN 943812QMP Filtri Replaces CU250P25VN 943812QMP Filtri Replaces CU350A03VN 943813QMP Filtri Replaces CU350A06VN 943814QMP Filtri Replaces CU350A10VN 943815QMP Filtri Replaces CU350A25VN 943816QMP Filtri Replaces CU350M25VN 943816QMP Filtri Replaces CU350P10VN 943816QMP Filtri Replaces CU350P25VN 943816QMP Filtri Replaces CU630A03VN 943817QMP Filtri Replaces CU630A06VN 943818QMP Filtri Replaces CU630A10VN 943819QMP Filtri Replaces CU630A25VN 943820QMP Filtri Replaces CU630M25VN 943820QMP Filtri Replaces CU630P10VN 943820QMP Filtri Replaces CU630P25VN 943820QMP Filtri Replaces CU730A03VN 943821QMP Filtri Replaces CU730A06VN 943822QMP Filtri Replaces CU730A10VN 943823QMP Filtri Replaces CU730A25VN 943824QMP Filtri Replaces CU730M25VN 943824QMP Filtri Replaces CU730P10VN 943824QMP Filtri Replaces CU730P25VN 943824QMP Filtri Replaces CU850A03VN 943825QMP Filtri Replaces CU850A06VN 943826QMP Filtri Replaces CU850A10VN 943827QMP Filtri Replaces CU850A25VN 943828QMP Filtri Replaces CU850M25VN 943828QMP Filtri Replaces CU850P10VN 943828QMP Filtri Replaces CU850P25VN 943828QMP Filtri Replaces HP0371A03VN 938321QMP Filtri Replaces HP0371A06VN 938322QMP Filtri Replaces HP0371A10VN 938323QMP Filtri Replaces HP0371A25VN 938324QMP Filtri Replaces HP0371M10VN 938324QMP Filtri Replaces HP0371M25VN 938324QMP Filtri Replaces HP0371P10VN 938324QMP Filtri Replaces HP0371P25VN 938324QMP Filtri Replaces HP0372A03VN 938325QMP Filtri Replaces HP0372A06VN 938326QMP Filtri Replaces HP0372A10VN 938327QMP Filtri Replaces HP0372A25VN 938328QMP Filtri Replaces HP0372M10VN 938328Q269Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMP Filtri Replaces HP0372M25VN 938328QMP Filtri Replaces HP0372P10VN 938328QMP Filtri Replaces HP0372P25VN 938328QMP Filtri Replaces HP0651A03VH 943613QMP Filtri Replaces HP0651A03VN 938329QMP Filtri Replaces HP0651A06VH 943614QMP Filtri Replaces HP0651A06VN 938330QMP Filtri Replaces HP0651A10VH 943615QMP Filtri Replaces HP0651A10VN 938331QMP Filtri Replaces HP0651A25VH 943616QMP Filtri Replaces HP0651A25VN 938332QMP Filtri Replaces HP0651M10VH 943616QMP Filtri Replaces HP0651M10VN 938332QMP Filtri Replaces HP0651M25VH 943616QMP Filtri Replaces HP0651M25VN 938332QMP Filtri Replaces HP0651P10VN 938332QMP Filtri Replaces HP0651P25VN 938332QMP Filtri Replaces HP0652A03VH 943617QMP Filtri Replaces HP0652A03VN 938333QMP Filtri Replaces HP0652A06VH 943618QMP Filtri Replaces HP0652A06VN 938334QMP Filtri Replaces HP0652A10VH 943619QMP Filtri Replaces HP0652A10VN 938335QMP Filtri Replaces HP0652A25VH 943620QMP Filtri Replaces HP0652A25VN 938336QMP Filtri Replaces HP0652M10VH 943620QMP Filtri Replaces HP0652M10VN 938336QMP Filtri Replaces HP0652M25VH 943620QMP Filtri Replaces HP0652M25VN 938336QMP Filtri Replaces HP0652P10VN 938336QMP Filtri Replaces HP0652P25VN 938336QMP Filtri Replaces HP0653A03VH 943621QMP Filtri Replaces HP0653A03VN 938337QMP Filtri Replaces HP0653A06VH 943622QMP Filtri Replaces HP0653A06VN 938338QMP Filtri Replaces HP0653A10VH 943623QMP Filtri Replaces HP0653A10VN 938339QMP Filtri Replaces HP0653A25VH 943624QMP Filtri Replaces HP0653A25VN 938340QMP Filtri Replaces HP0653M10VH 943624QMP Filtri Replaces HP0653M10VN 938340QMP Filtri Replaces HP0653M25VH 943624QMP Filtri Replaces HP0653M25VN 938340QMP Filtri Replaces HP0653P10VN 938340QMP Filtri Replaces HP0653P25VN 938340QMP Filtri Replaces HP1351A03VH 943625QMP Filtri Replaces HP1351A03VN 938341QMP Filtri Replaces HP1351A06VH 943626QMP Filtri Replaces HP1351A06VN 938342QMP Filtri Replaces HP1351A10VH 943627QMP Filtri Replaces HP1351A10VN 938343QMP Filtri Replaces HP1351A25VH 943628QMP Filtri Replaces HP1351A25VN 938344QMP Filtri Replaces HP1351M10VH 943628QMP Filtri Replaces HP1351M10VN 938344QMP Filtri Replaces HP1351M25VH 943628QMP Filtri Replaces HP1351M25VN 938344Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMP Filtri Replaces HP1351P10VN 938344QMP Filtri Replaces HP1351P25VN 938344QMP Filtri Replaces HP1352A03VH 943629QMP Filtri Replaces HP1352A03VN 938345QMP Filtri Replaces HP1352A06VH 943630QMP Filtri Replaces HP1352A06VN 938346QMP Filtri Replaces HP1352A10VH 943631QMP Filtri Replaces HP1352A10VN 938347QMP Filtri Replaces HP1352A25VH 943632QMP Filtri Replaces HP1352A25VN 938348QMP Filtri Replaces HP1352M10VH 943632QMP Filtri Replaces HP1352M10VN 938348QMP Filtri Replaces HP1352M25VH 943632QMP Filtri Replaces HP1352M25VN 938348QMP Filtri Replaces HP1352P10VN 938348QMP Filtri Replaces HP1352P25VN 938348QMP Filtri Replaces HP1353A03VH 943633QMP Filtri Replaces HP1353A03VN 938349QMP Filtri Replaces HP1353A06VH 943634QMP Filtri Replaces HP1353A06VN 938350QMP Filtri Replaces HP1353A10VH 943635QMP Filtri Replaces HP1353A10VN 938351QMP Filtri Replaces HP1353A25VH 943636QMP Filtri Replaces HP1353A25VN 938352QMP Filtri Replaces HP1353M10VH 943636QMP Filtri Replaces HP1353M10VN 938352QMP Filtri Replaces HP1353M25VH 943636QMP Filtri Replaces HP1353M25VN 938352QMP Filtri Replaces HP1353P10VN 938352QMP Filtri Replaces HP1353P25VN 938352QMP Filtri Replaces HP3201A03VH 943637QMP Filtri Replaces HP3201A03VN 938353QMP Filtri Replaces HP3201A06VH 943638QMP Filtri Replaces HP3201A06VN 938354QMP Filtri Replaces HP3201A10VH 943639QMP Filtri Replaces HP3201A10VN 938355QMP Filtri Replaces HP3201A25VH 943640QMP Filtri Replaces HP3201A25VN 938356QMP Filtri Replaces HP3201M10VH 943640QMP Filtri Replaces HP3201M10VN 938356QMP Filtri Replaces HP3201M25VH 943640QMP Filtri Replaces HP3201M25VN 938356QMP Filtri Replaces HP3201P10VN 938356QMP Filtri Replaces HP3201P25VN 938356QMP Filtri Replaces HP3202A03VH 943641QMP Filtri Replaces HP3202A03VN 938357QMP Filtri Replaces HP3202A06VH 943642QMP Filtri Replaces HP3202A06VN 938358QMP Filtri Replaces HP3202A10VH 943643QMP Filtri Replaces HP3202A10VN 938359QMP Filtri Replaces HP3202A25VH 943644QMP Filtri Replaces HP3202A25VN 938360QMP Filtri Replaces HP3202M10VH 943644QMP Filtri Replaces HP3202M10VN 938360QMP Filtri Replaces HP3202M25VH 943644QMP Filtri Replaces HP3202M25VN 938360QMP Filtri Replaces HP3202P10VN 938360Q270Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMP Filtri Replaces HP3202P25VN 938360QMP Filtri Replaces HP3203A03VH 943645QMP Filtri Replaces HP3203A03VN 943500QMP Filtri Replaces HP3203A06VH 943646QMP Filtri Replaces HP3203A06VN 943501QMP Filtri Replaces HP3203A10VH 943647QMP Filtri Replaces HP3203A10VN 943502QMP Filtri Replaces HP3203A25VH 943648QMP Filtri Replaces HP3203A25VN 943503QMP Filtri Replaces HP3203M10VH 943648QMP Filtri Replaces HP3203M10VN 943503QMP Filtri Replaces HP3203M25VH 943648QMP Filtri Replaces HP3203M25VN 943503QMP Filtri Replaces HP3203P10VN 943503QMP Filtri Replaces HP3203P25VN 943503QMP Filtri Replaces HP3204A03VH 943649QMP Filtri Replaces HP3204A03VN 943504QMP Filtri Replaces HP3204A06VH 943650QMP Filtri Replaces HP3204A06VN 943505QMP Filtri Replaces HP3204A10VH 943651QMP Filtri Replaces HP3204A10VN 943506QMP Filtri Replaces HP3204A25VH 943652QMP Filtri Replaces HP3204A25VN 943507QMP Filtri Replaces HP3204M10VH 943652QMP Filtri Replaces HP3204M10VN 943507QMP Filtri Replaces HP3204M25VH 943652QMP Filtri Replaces HP3204M25VN 943507QMP Filtri Replaces HP3204P10VN 943507QMP Filtri Replaces HP3204P25VN 943507QMP Filtri Replaces HP5001A03VH 943653QMP Filtri Replaces HP5001A03VN 943508QMP Filtri Replaces HP5001A06VH 943654QMP Filtri Replaces HP5001A06VN 943509QMP Filtri Replaces HP5001A10VH 943655QMP Filtri Replaces HP5001A10VN 943510QMP Filtri Replaces HP5001A25VH 943656QMP Filtri Replaces HP5001A25VN 943511QMP Filtri Replaces HP5001M10VH 943656QMP Filtri Replaces HP5001M10VN 943511QMP Filtri Replaces HP5001M25VH 943656QMP Filtri Replaces HP5001M25VN 943511QMP Filtri Replaces HP5001P10VN 943511QMP Filtri Replaces HP5001P25VN 943511QMP Filtri Replaces HP5002A03VH 943657QMP Filtri Replaces HP5002A03VN 943512QMP Filtri Replaces HP5002A06VH 943658QMP Filtri Replaces HP5002A06VN 943513QMP Filtri Replaces HP5002A10VH 943659QMP Filtri Replaces HP5002A10VN 943514QMP Filtri Replaces HP5002A25VH 943660QMP Filtri Replaces HP5002A25VN 943515QMP Filtri Replaces HP5002M10VH 943660QMP Filtri Replaces HP5002M10VN 943515QMP Filtri Replaces HP5002M25VH 943660QMP Filtri Replaces HP5002M25VN 943515QMP Filtri Replaces HP5002P10VN 943515QMP Filtri Replaces HP5002P25VN 943515Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMP Filtri Replaces HP5003A03VH 943661QMP Filtri Replaces HP5003A03VN 943516QMP Filtri Replaces HP5003A06VH 943662QMP Filtri Replaces HP5003A06VN 943517QMP Filtri Replaces HP5003A10VH 943663QMP Filtri Replaces HP5003A10VN 943518QMP Filtri Replaces HP5003A25VH 943664QMP Filtri Replaces HP5003A25VN 943519QMP Filtri Replaces HP5003M10VH 943664QMP Filtri Replaces HP5003M10VN 943519QMP Filtri Replaces HP5003M25VH 943664QMP Filtri Replaces HP5003M25VN 943519QMP Filtri Replaces HP5003P10VN 943519QMP Filtri Replaces HP5003P25VN 943519QMP Filtri Replaces HP5004A03VH 943665QMP Filtri Replaces HP5004A03VN 943520QMP Filtri Replaces HP5004A06VH 943666QMP Filtri Replaces HP5004A06VN 943521QMP Filtri Replaces HP5004A10VH 943667QMP Filtri Replaces HP5004A10VN 943522QMP Filtri Replaces HP5004A25VH 943668QMP Filtri Replaces HP5004A25VN 943523QMP Filtri Replaces HP5004M10VH 943668QMP Filtri Replaces HP5004M10VN 943523QMP Filtri Replaces HP5004M25VH 943668QMP Filtri Replaces HP5004M25VN 943523QMP Filtri Replaces HP5004P10VN 943523QMP Filtri Replaces HP5004P25VN 943523QMP Filtri Replaces HP5005A03VH 943669QMP Filtri Replaces HP5005A03VN 943524QMP Filtri Replaces HP5005A06VH 943670QMP Filtri Replaces HP5005A06VN 943525QMP Filtri Replaces HP5005A10VH 943671QMP Filtri Replaces HP5005A10VN 943526QMP Filtri Replaces HP5005A25VH 943672QMP Filtri Replaces HP5005A25VN 943527QMP Filtri Replaces HP5005M10VH 943672QMP Filtri Replaces HP5005M10VN 943527QMP Filtri Replaces HP5005M25VH 943672QMP Filtri Replaces HP5005M25VN 943527QMP Filtri Replaces HP5005P10VN 943527QMP Filtri Replaces HP5005P25VN 943527QMP Filtri Replaces MF0301A03VN 943703QMP Filtri Replaces MF0301A06VN 943704QMP Filtri Replaces MF0301A10VN 943705QMP Filtri Replaces MF0301A25VN 943706QMP Filtri Replaces MF0301M25VN 943706QMP Filtri Replaces MF0301P10VN 943706QMP Filtri Replaces MF0301P25VN 943706QMP Filtri Replaces MF1001A03VN 943707QMP Filtri Replaces MF1001A06VN 943708QMP Filtri Replaces MF1001A10VN 943709QMP Filtri Replaces MF1001A25VN 943710QMP Filtri Replaces MF1001M25VN 943710QMP Filtri Replaces MF1001P10VN 943710QMP Filtri Replaces MF1001P25VN 943710QMP Filtri Replaces MF1002A03VN 943711Q271Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMP Filtri Replaces MF1002A06VN 943712QMP Filtri Replaces MF1002A10VN 943713QMP Filtri Replaces MF1002A25VN 943714QMP Filtri Replaces MF1002M25VN 943714QMP Filtri Replaces MF1002P10VN 943714QMP Filtri Replaces MF1002P25VN 943714QMP Filtri Replaces MF1003A03VN 943715QMP Filtri Replaces MF1003A06VN 943716QMP Filtri Replaces MF1003A10VN 943717QMP Filtri Replaces MF1003A25VN 943718QMP Filtri Replaces MF1003M25VN 943718QMP Filtri Replaces MF1003P10VN 943718QMP Filtri Replaces MF1003P25VN 943718QMP Filtri Replaces MF1801A03VN 943719QMP Filtri Replaces MF1801A06VN 943720QMP Filtri Replaces MF1801A10VN 943721QMP Filtri Replaces MF1801A25VN 943722QMP Filtri Replaces MF1801M25VN 943722QMP Filtri Replaces MF1801P10VN 943722QMP Filtri Replaces MF1801P25VN 943722QMP Filtri Replaces MF1802A03VN 943723QMP Filtri Replaces MF1802A06VN 943724QMP Filtri Replaces MF1802A10VN 943725QMP Filtri Replaces MF1802A25VN 943726QMP Filtri Replaces MF1802M25VN 943726QMP Filtri Replaces MF1802P10VN 943726QMP Filtri Replaces MF1802P25VN 943726QMP Filtri Replaces MF4001A03VN 943727QMP Filtri Replaces MF4001A06VN 943728QMP Filtri Replaces MF4001A10VN 943729QMP Filtri Replaces MF4001A25VN 943730QMP Filtri Replaces MF4001M25VN 943730QMP Filtri Replaces MF4001P10VN 943730QMP Filtri Replaces MF4001P25VN 943730QMP Filtri Replaces MF4002A03VN 943731QMP Filtri Replaces MF4002A06VN 943732QMP Filtri Replaces MF4002A10VN 943733QMP Filtri Replaces MF4002A25VN 943734QMP Filtri Replaces MF4002M25VN 943734QMP Filtri Replaces MF4002P10VN 943734QMP Filtri Replaces MF4002P25VN 943734QMP Filtri Replaces MF4003A03VN 943735QMP Filtri Replaces MF4003A06VN 943736QMP Filtri Replaces MF4003A10VN 943737QMP Filtri Replaces MF4003A25VN 943738QMP Filtri Replaces MF4003M25VN 943738QMP Filtri Replaces MF4003P10VN 943738QMP Filtri Replaces MF4003P25VN 943738QMP Filtri Replaces MF7501A03VN 943739QMP Filtri Replaces MF7501A06VN 943740QMP Filtri Replaces MF7501A10VN 943741QMP Filtri Replaces MF7501A25VN 943742QMP Filtri Replaces MF7501M25VN 943742QMP Filtri Replaces MF7501P10VN 943742QMP Filtri Replaces MF7501P25VN 943742QMP Filtri Replaces MR1001A03V 938318QMP Filtri Replaces MR1001A10V 938319Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMP Filtri Replaces MR1001A25V 938320QMP Filtri Replaces MR1001M25V 938320QMP Filtri Replaces MR1001P10V 938320QMP Filtri Replaces MR1001P25V 938320QMP Filtri Replaces MR1002A03V 943879QMP Filtri Replaces MR1002A10V 943880QMP Filtri Replaces MR1002A25V 943881QMP Filtri Replaces MR1002M25V 943881QMP Filtri Replaces MR1002P10V 943881QMP Filtri Replaces MR1002P25V 943881QMP Filtri Replaces MR1003A03V 943887QMP Filtri Replaces MR1003A10V 943888QMP Filtri Replaces MR1003A25V 943889QMP Filtri Replaces MR1003M25V 943889QMP Filtri Replaces MR1003P10V 943889QMP Filtri Replaces MR1003P25V 943889QMP Filtri Replaces MR1004A03V 943895QMP Filtri Replaces MR1004A10V 943896QMP Filtri Replaces MR1004A25V 943897QMP Filtri Replaces MR1004M25V 943897QMP Filtri Replaces MR1004P10V 943897QMP Filtri Replaces MR1004P25V 943897QMP Filtri Replaces MR2501A03V 943903QMP Filtri Replaces MR2501A10V 943904QMP Filtri Replaces MR2501A25V 943905QMP Filtri Replaces MR2501M25V 943905QMP Filtri Replaces MR2501P10V 943905QMP Filtri Replaces MR2501P25V 943905QMP Filtri Replaces MR2502A03V 943911QMP Filtri Replaces MR2502A10V 943912QMP Filtri Replaces MR2502A25V 943913QMP Filtri Replaces MR2502M25V 943913QMP Filtri Replaces MR2502P10V 943913QMP Filtri Replaces MR2502P25V 943913QMP Filtri Replaces MR2503A03V 943919QMP Filtri Replaces MR2503A10V 943920QMP Filtri Replaces MR2503A25V 943921QMP Filtri Replaces MR2503M25V 943921QMP Filtri Replaces MR2503P10V 943921QMP Filtri Replaces MR2503P25V 943921QMP Filtri Replaces MR2504A03V 943927QMP Filtri Replaces MR2504A10V 943928QMP Filtri Replaces MR2504A25V 943929QMP Filtri Replaces MR2504M25V 943929QMP Filtri Replaces MR2504P10V 943929QMP Filtri Replaces MR2504P25V 943929QMP Filtri Replaces MR6301A03V 943935QMP Filtri Replaces MR6301A10V 943936QMP Filtri Replaces MR6301A25V 943937QMP Filtri Replaces MR6301M25V 943937QMP Filtri Replaces MR6301P10V 943937QMP Filtri Replaces MR6301P25V 943937QMP Filtri Replaces MR6302A03V 943943QMP Filtri Replaces MR6302A10V 943944QMP Filtri Replaces MR6302A25V 943945QMP Filtri Replaces MR6302M25V 943945QMP Filtri Replaces MR6302P10V 943945Q272Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberMP Filtri Replaces MR6302P25V 943945QMP Filtri Replaces MR6303A03V 943951QMP Filtri Replaces MR6303A10V 943952QMP Filtri Replaces MR6303A25V 943953QMP Filtri Replaces MR6303M25V 943953QMP Filtri Replaces MR6303P10V 943953QMP Filtri Replaces MR6303P25V 943953QMP Filtri Replaces MR6304A03V 943959QMP Filtri Replaces MR6304A10V 943960QMP Filtri Replaces MR6304A25V 943961QMP Filtri Replaces MR6304M25V 943961QMP Filtri Replaces MR6304P10V 943961QMP Filtri Replaces MR6304P25V 943961QMP Filtri Replaces MR8501A03V 943967QMP Filtri Replaces MR8501A10V 943968QMP Filtri Replaces MR8501A25V 943969QMP Filtri Replaces MR8501M25V 943969QMP Filtri Replaces MR8501P10V 943969QMP Filtri Replaces MR8501P25V 943969QMP Filtri Replaces MR8502A03V 943975QMP Filtri Replaces MR8502A10V 943976QMP Filtri Replaces MR8502A25V 943977QMP Filtri Replaces MR8502M25V 943977QMP Filtri Replaces MR8502P10V 943977QMP Filtri Replaces MR8502P25V 943977QMP Filtri Replaces MR8503A03V 943983QMP Filtri Replaces MR8503A10V 943984QMP Filtri Replaces MR8503A25V 943985QMP Filtri Replaces MR8503M25V 943985QMP Filtri Replaces MR8503P10V 943985QMP Filtri Replaces MR8503P25V 943985QMP Filtri Replaces MR8504A03V 943991QMP Filtri Replaces MR8504A10V 943992QMP Filtri Replaces MR8504A25V 943993QMP Filtri Replaces MR8504M25V 943993QMP Filtri Replaces MR8504P10V 943993QMP Filtri Replaces MR8504P25V 943993QNorman Ultraporous Replaces U-1005 MX.1518.4.10X4Palfinger Replaces EA1673 939724QPalfinger Replaces EA2169 938309QPall Replaces HC0728FKN26H 938147QPall Replaces HC0728FKN39H 938151QPall Replaces HC0728FKP26H 938146QPall Replaces HC0728FKP39H 938150QPall Replaces HC0728FKS26H 938148QPall Replaces HC0728FKS39H 938152QPall Replaces HC0728FKT26H 938149QPall Replaces HC0728FKT39H 938153QPall Replaces HC2253FKN16H 932641QPall Replaces HC2253FKP16H 932640QPall Replaces HC2253FKS16H 932642QPall Replaces HC2254FKP16H 932643QPall Replaces HC2254FKP8H 932637QPall Replaces HC2254FKT16H 932645QPall Replaces HC2254FKT8H 932639QPall Replaces HC2618FKN18H 933912QPall Replaces HC2618FKN36H 933919Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberPall Replaces HC2618FKP18H 934179QPall Replaces HC2618FKP36H 934180QPall Replaces HC2618FKS18H 933913QPall Replaces HC2618FKS36H 933920QPall Replaces HC2618FKT18H 933914QPall Replaces HC2618FKT36H 933921QPall Replaces HC6200FKN8H 938159QPall Replaces HC6200FKP8H 938158QPall Replaces HC6200FKS8H 938160QPall Replaces HC6200FKT8H 938161QPall Replaces HC6300FKN13H 937112QPall Replaces HC6300FKN16H 937113QPall Replaces HC6300FKN26H 937114QPall Replaces HC6300FKN8H 937115QPall Replaces HC6300FKP13H 937116QPall Replaces HC6300FKP16H 937117QPall Replaces HC6300FKP26H 937118QPall Replaces HC6300FKP8H 937122QPall Replaces HC6300FKS13H 937123QPall Replaces HC6300FKS16H 937124QPall Replaces HC6300FKS26H 937125QPall Replaces HC6300FKS8H 937126QPall Replaces HC6300FKT13H 937127QPall Replaces HC6300FKT16H 937128QPall Replaces HC6300FKT26H 937129QPall Replaces HC6300FKT8H 937130QPall Replaces HC6400FKN13H 935140Pall Replaces HC6400FKN16H 935144Pall Replaces HC6400FKN26H 935148Pall Replaces HC6400FKN8H 937134QPall Replaces HC6400FKP13H 935139Pall Replaces HC6400FKP16H 935143Pall Replaces HC6400FKP26H 935147Pall Replaces HC6400FKP8H 937138QPall Replaces HC6400FKS13H 935141Pall Replaces HC6400FKS16H 935145Pall Replaces HC6400FKS26H 935149Pall Replaces HC6400FKS8H 937142QPall Replaces HC6400FKT13H 935142Pall Replaces HC6400FKT16H 935146Pall Replaces HC6400FKT26H 935150Pall Replaces HC6400FKT8H 937146QPall Replaces HC6500FKN13H 935152Pall Replaces HC6500FKN16H 935156Pall Replaces HC6500FKN26H 935160Pall Replaces HC6500FKN8H PR4346QPall Replaces HC6500FKP13H 935151Pall Replaces HC6500FKP16H 935155Pall Replaces HC6500FKP26H 935159Pall Replaces HC6500FKP8H PR4347QPall Replaces HC6500FKS13H 935153Pall Replaces HC6500FKS16H 935157Pall Replaces HC6500FKS26H 935161Pall Replaces HC6500FKS8H PR4345QPall Replaces HC6500FKT13H 935154Pall Replaces HC6500FKT16H 935158Pall Replaces HC6500FKT26H 935162273Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberPall Replaces HC6500FKT8H PR4344QPall Replaces HC7400SKN4H 935164Pall Replaces HC7400SKN8H 935168Pall Replaces HC7400SKP4H 935163Pall Replaces HC7400SKP8H 935167Pall Replaces HC7400SKS4H 935165Pall Replaces HC7400SKS8H 935169Pall Replaces HC7400SKT4H 935166Pall Replaces HC7400SKT8H 935170Pall Replaces HC7500SKJ4H 937151QPall Replaces HC7500SKN4H 928766Pall Replaces HC7500SKN8H 932073Pall Replaces HC7500SKP4H 934200Pall Replaces HC7500SKS8H 929445Pall Replaces HC7500SKT4H 928767Pall Replaces HC7500SKT8H 929446Pall Replaces HC8200FKN13H 934472QPall Replaces HC8200FKN16H 935549QPall Replaces HC8200FKN8H 932266QPall Replaces HC8200FKP13H 934473QPall Replaces HC8200FKP16H 935548QPall Replaces HC8200FKP8H 933363QPall Replaces HC8200FKS13H 934474QPall Replaces HC8200FKS16H 935550QPall Replaces HC8200FKS8H 933364QPall Replaces HC8200FKT13H 934475QPall Replaces HC8200FKT16H 935551QPall Replaces HC8200FKT8H 933365QPall Replaces HC8300FKN16H PR2798QPall Replaces HC8300FKN21H 937153QPall Replaces HC8300FKN39H 932873QPall Replaces HC8300FKN8H 927861QPall Replaces HC8300FKP16H PR3455QPall Replaces HC8300FKP39H 932872QPall Replaces HC8300FKP8H 927663QPall Replaces HC8300FKS16H PR3456QPall Replaces HC8300FKS21H 937155QPall Replaces HC8300FKS26H 937156QPall Replaces HC8300FKS39H 932874QPall Replaces HC8300FKS8H 927661QPall Replaces HC8300FKT16H 933047QPall Replaces HC8300FKT21H 937157QPall Replaces HC8300FKT26H 937158QPall Replaces HC8300FKT39H 932875QPall Replaces HC8300FKT8H 929099QPall Replaces HC8300FKZ16H 937159QPall Replaces HC8300FKZ39H 937160QPall Replaces HC8300FKZ8H 937161QPall Replaces HC8300FWT16H 937162QPall Replaces HC8300FWT39H 937163QPall Replaces HC8300FWT8H 937164QPall Replaces HC8304FKN16H 937165QPall Replaces HC8304FKN39H 937166QPall Replaces HC8304FKP16H 937167QPall Replaces HC8304FKP39H 937168QPall Replaces HC8304FKS16H 937169QPall Replaces HC8304FKS39H 937170Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberPall Replaces HC8304FKT16H 937171QPall Replaces HC8304FKT39H 937172QPall Replaces HC8314FKN16H 934309QPall Replaces HC8314FKN39H 934122QPall Replaces HC8314FKP16H 934308QPall Replaces HC8314FKP39H 934121QPall Replaces HC8314FKS16H 934310QPall Replaces HC8314FKS39H 934123QPall Replaces HC8314FKT16H 934311QPall Replaces HC8314FKT39H 934124QPall Replaces HC8400FKN16H 933759QPall Replaces HC8400FKN26H 933227QPall Replaces HC8400FKN39H 933090QPall Replaces HC8400FKN8H 933758QPall Replaces HC8400FKP16H 933776QPall Replaces HC8400FKP26H 933226QPall Replaces HC8400FKP39H 933089QPall Replaces HC8400FKP8H 933773QPall Replaces HC8400FKS16H 933777QPall Replaces HC8400FKS26H 933228QPall Replaces HC8400FKS39H 933091QPall Replaces HC8400FKS8H 933774QPall Replaces HC8400FKT16H 933763QPall Replaces HC8400FKT26H 933229QPall Replaces HC8400FKT39H 933092QPall Replaces HC8400FKT8H 933775QPall Replaces HC8500FKN13H 935176Pall Replaces HC8500FKN26H 935180Pall Replaces HC8500FKN8H 935172Pall Replaces HC8500FKP13H 935175Pall Replaces HC8500FKP26H 935179Pall Replaces HC8500FKP8H 935171Pall Replaces HC8500FKS13H 935177Pall Replaces HC8500FKS26H 935181Pall Replaces HC8500FKS8H 935173Pall Replaces HC8500FKT13H 935178Pall Replaces HC8500FKT26H 935182Pall Replaces HC8500FKT8H 935174Pall Replaces HC8700FKN4H PR4454QPall Replaces HC8700FKN8H PR4458QPall Replaces HC8700FKP4H PR4453QPall Replaces HC8700FKP8H PR4457QPall Replaces HC8700FKS4H PR4455QPall Replaces HC8700FKS8H PR4459QPall Replaces HC8700FKT4H PR4456QPall Replaces HC8700FKT8H PR4460QPall Replaces HC8800FKN13H 933378QPall Replaces HC8800FKN16H 933234QPall Replaces HC8800FKN8H 933377QPall Replaces HC8800FKP13H 930222QPall Replaces HC8800FKP16H 930226QPall Replaces HC8800FKP8H 930218QPall Replaces HC8800FKS13H 930223QPall Replaces HC8800FKS16H 930227QPall Replaces HC8800FKS8H 930219QPall Replaces HC8800FKT13H 930224QPall Replaces HC8800FKT16H 930228Q274Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberPall Replaces HC8800FKT8H 930220QPall Replaces HC8900FKN13H 933203QPall Replaces HC8900FKN16H 933211QPall Replaces HC8900FKN26H 933219QPall Replaces HC8900FKN39H 937180QPall Replaces HC8900FKN8H 933194QPall Replaces HC8900FKP13H 933202QPall Replaces HC8900FKP16H 933210QPall Replaces HC8900FKP26H 933218QPall Replaces HC8900FKP39H 937181QPall Replaces HC8900FKP8H 933193QPall Replaces HC8900FKS13H 933204QPall Replaces HC8900FKS16H 933212QPall Replaces HC8900FKS26H 933220QPall Replaces HC8900FKS39H 937182QPall Replaces HC8900FKS8H 933195QPall Replaces HC8900FKT13H 933205QPall Replaces HC8900FKT16H 933213QPall Replaces HC8900FKT26H 933221QPall Replaces HC8900FKT39H 937183QPall Replaces HC8900FKT8H 933196QPall Replaces HC8904FKN13H 944067QPall Replaces HC8904FKN26H 944071QPall Replaces HC8904FKN39H 938315QPall Replaces HC8904FKN8H 944063QPall Replaces HC8904FKP13H 944066QPall Replaces HC8904FKP26H 944070QPall Replaces HC8904FKP39H 938314QPall Replaces HC8904FKP8H 944062QPall Replaces HC8904FKS13H 944068QPall Replaces HC8904FKS26H 944072QPall Replaces HC8904FKS39H 938316QPall Replaces HC8904FKS8H 944064QPall Replaces HC8904FKT13H 944069QPall Replaces HC8904FKT26H 944073QPall Replaces HC8904FKT39H 938317QPall Replaces HC8904FKT8H 944065QPall Replaces HC9020FKN4H 933239QPall Replaces HC9020FKN8H 933246QPall Replaces HC9020FKP4H 925582QPall Replaces HC9020FKP8H 925602QPall Replaces HC9020FKS4H 925580QPall Replaces HC9020FKS8H 925600QPall Replaces HC9020FKT4H PR3444QPall Replaces HC9020FKT8H PR3446QPall Replaces HC9020FKZ4H 937184QPall Replaces HC9021FKP4H 927725QPall Replaces HC9021FKP8H 927723QPall Replaces HC9021FKS4H 927696QPall Replaces HC9021FKT4H 928642QPall Replaces HC9021FKT8H 928643QPall Replaces HC9100FKN8H 938163QPall Replaces HC9100FKP8H 938162QPall Replaces HC9100FKS8H 938164QPall Replaces HC9100FKT8H 938165QPall Replaces HC9300FKN8H 935184Pall Replaces HC9300FKP8H 935183<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberPall Replaces HC9300FKS8H 935185Pall Replaces HC9300FKT8H 935186Pall Replaces HC9400FKN13H 929886QPall Replaces HC9400FKN26H 929892QPall Replaces HC9400FKN39H 933264QPall Replaces HC9400FKP13H 929884QPall Replaces HC9400FKP26H 929890QPall Replaces HC9400FKP39H 933263QPall Replaces HC9400FKS13H 929885QPall Replaces HC9400FKS26H 929891QPall Replaces HC9400FKS39H 933265QPall Replaces HC9400FKT13H 933253QPall Replaces HC9400FKT26H 933258QPall Replaces HC9400FKT39H 933266QPall Replaces HC9600FKN13H 926845QPall Replaces HC9600FKN16H 926890QPall Replaces HC9600FKN4H 926841QPall Replaces HC9600FKN8H 926843QPall Replaces HC9600FKP13H 926698QPall Replaces HC9600FKP16H 926699QPall Replaces HC9600FKP4H PR3435QPall Replaces HC9600FKP8H PR3436QPall Replaces HC9600FKS13H 926839QPall Replaces HC9600FKS16H 926888QPall Replaces HC9600FKS4H PR3437QPall Replaces HC9600FKS8H PR3438QPall Replaces HC9600FKT13H 930162QPall Replaces HC9600FKT16H 930164QPall Replaces HC9600FKT4H PR3440QPall Replaces HC9600FKT8H PR3441QPall Replaces HC9600FWT13H 937186QPall Replaces HC9601FKN8H 934194QPall Replaces HC9601FKP13H 927182QPall Replaces HC9601FKP16H 928143QPall Replaces HC9601FKP4H 927170QPall Replaces HC9601FKP8H 927176QPall Replaces HC9601FKS13H 937187QPall Replaces HC9601FKS16H 937188QPall Replaces HC9601FKS4H 937189QPall Replaces HC9601FKS8H 937190QPall Replaces HC9601FKT13H 927181QPall Replaces HC9601FKT16H 928142QPall Replaces HC9601FKT4H 927169QPall Replaces HC9601FKT8H 927175QPall Replaces HC9604FKN13H 937191QPall Replaces HC9604FKN16H 937192QPall Replaces HC9604FKN4H 937193QPall Replaces HC9604FKN8H 937194QPall Replaces HC9604FKP13H 937197QPall Replaces HC9604FKP16H 937198QPall Replaces HC9604FKP4H 937199QPall Replaces HC9604FKP8H 937200QPall Replaces HC9604FKS13H 937201QPall Replaces HC9604FKS16H 937202QPall Replaces HC9604FKS4H 937203QPall Replaces HC9604FKS8H 937204QPall Replaces HC9604FKT13H 937205Q275Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberPall Replaces HC9604FKT16H 937206QPall Replaces HC9604FKT4H 937207QPall Replaces HC9604FKT8H 937208QPall Replaces HC9650FKN13H 937209QPall Replaces HC9650FKN16H 926994QPall Replaces HC9650FKN4H 937210QPall Replaces HC9650FKN8H 926988QPall Replaces HC9650FKP13H 937211QPall Replaces HC9650FKP16H 926998QPall Replaces HC9650FKP4H 937212QPall Replaces HC9650FKP8H 926992QPall Replaces HC9650FKS13H 937213QPall Replaces HC9650FKS16H 926996QPall Replaces HC9650FKS4H 937214QPall Replaces HC9650FKS8H 926990QPall Replaces HC9650FKT13H 937215QPall Replaces HC9650FKT16H 933302QPall Replaces HC9650FKT4H 937216QPall Replaces HC9650FKT8H 933295QPall Replaces HC9651FKN16H 937217QPall Replaces HC9651FKN8H 937218QPall Replaces HC9651FKP16H 928156QPall Replaces HC9651FKP8H 928152QPall Replaces HC9651FKS16H 937219QPall Replaces HC9651FKS8H 937220QPall Replaces HC9651FKT16H 928154QPall Replaces HC9651FKT8H 928150QPall Replaces HC9700FKN18H 932678QPall Replaces HC9700FKN27H 933487QPall Replaces HC9700FKN9H 932669QPall Replaces HC9700FKN9H HF41L5VQPall Replaces HC9700FKP18H 932677QPall Replaces HC9700FKP27H 933486QPall Replaces HC9700FKP9H 932668QPall Replaces HC9700FKP9H HF41L3VQPall Replaces HC9700FKS18H 932679QPall Replaces HC9700FKS27H 933488QPall Replaces HC9700FKS9H 932670QPall Replaces HC9700FKS9H HF41L10VQPall Replaces HC9700FKT18H 931020QPall Replaces HC9700FKT27H 933489QPall Replaces HC9700FKT9H 931018QPall Replaces HC9700FKT9H HF41L20VQPall Replaces HC9800FKN13H 933784QPall Replaces HC9800FKN4H 930197QPall Replaces HC9800FKN8H 930198QPall Replaces HC9800FKP13H 933782QPall Replaces HC9800FKP4H 930189QPall Replaces HC9800FKP8H 930192QPall Replaces HC9800FKS13H 933786QPall Replaces HC9800FKS4H 930190QPall Replaces HC9800FKS8H 930193QPall Replaces HC9800FKT13H 933788QPall Replaces HC9800FKT4H 930191QPall Replaces HC9800FKT8H 930194QPall Replaces HC9801FKP13H PR2759QPall Replaces HC9801FKP4H 935191Q<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberPall Replaces HC9801FKP8H 935193QPall Replaces HC9801FKP8Z 935193Pall Replaces HC9801FKS13H 937221QPall Replaces HC9801FKS4H 937222QPall Replaces HC9801FKS8H 937223QPall Replaces HC9801FKT13H PR2760QPall Replaces HC9801FKT4H 935192QPall Replaces HC9801FKT8H 935194QPall Replaces HC9801FKT8Z 935194Pall Replaces HC9901FKP13H 935195Pall Replaces HC9901FKP26H 935197Pall Replaces HC9901FKP39H 935199Pall Replaces HC9901FKT13H 935196Pall Replaces HC9901FKT26H 935198Pall Replaces HC9901FKT39H 935200Pall Replaces WR8900FON26H 939300QPall Replaces HC9100FKN13H 944094QPall Replaces HC9100FKP13H 944093QPall Replaces HC9100FKS13H 944095QPall Replaces HC9100FKT13H 944096QPall Replaces HC9101FKN8H 944087QPall Replaces HC9101FKP8H 944086QPall Replaces HC9101FKS8H 944088QPall Replaces HC9101FKT8H 944089QPTI Replaces F4E-030-BC-B 926543PTI Replaces F4E-050-CC-B 926169PTI Replaces F4E-051-CC-B 927147PTI Replaces F4E-051-DC-B 927148PTI Replaces P83-100-EF-B 929103PTI Replaces P83-150-EF-B 929109PTI Replaces P83-250-EF-B 932006PTI Replaces PG-015-GH 935217PTI Replaces PG-015-GU 935220PTI Replaces PG-015-HH 935218PTI Replaces PG-015-HU 935221PTI Replaces PG-015-JH 935219PTI Replaces PG-015-JU 935222PTI Replaces PG-025-GH 935223PTI Replaces PG-025-GU 935226PTI Replaces PG-025-HH 935224PTI Replaces PG-025-HU 935227PTI Replaces PG-025-JH 935225PTI Replaces PG-025-JU 935228PTI Replaces PG-030-GH 935229PTI Replaces PG-030-GU 935232PTI Replaces PG-030-HH 935230PTI Replaces PG-030-HU 935233PTI Replaces PG-030-JH 935231PTI Replaces PG-030-JU 935234PTI Replaces PG-050-GH 935235PTI Replaces PG-050-GU 935238PTI Replaces PG-050-HH 935236PTI Replaces PG-050-HU 935239PTI Replaces PG-050-JH 935237PTI Replaces PG-050-JU 935240PTI Replaces PG-080-GH 935241PTI Replaces PG-080-GU 935244276Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
PAR FIT<strong>Hydraulic</strong> and LubricationInterchangeable Element RangePart NumbersNote: Bold and darker tint panel indicates the item is standard and available to order immediately.<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberPTI Replaces PG-080-HH 935242PTI Replaces PG-080-HU 935245PTI Replaces PG-080-JH 935243PTI Replaces PG-080-JU 935246PTI Replaces PG-120-GH 935247PTI Replaces PG-120-GU 935250PTI Replaces PG-120-HH 935248PTI Replaces PG-120-HU 935251PTI Replaces PG-120-JH 935249PTI Replaces PG-120-JU 935252Schroeder Replaces 7EZX10 936738Schroeder Replaces 8T10 930114Schroeder Replaces A10 926567Schroeder Replaces A25 926568Schroeder Replaces A3 926566Schroeder Replaces A<strong>AS</strong>25 935117Schroeder Replaces A<strong>AS</strong>7 935116Schroeder Replaces AAZ3 935115Schroeder Replaces <strong>AS</strong>25 935114Schroeder Replaces AZ10 935113Schroeder Replaces AZ3 935112Schroeder Replaces BBZ10 935122Schroeder Replaces BBZ25 935123Schroeder Replaces BBZ3/BBZ5 935121Schroeder Replaces CCZ10 935128Schroeder Replaces CCZ25 935129Schroeder Replaces CCZ3 935127Schroeder Replaces CCZX3 934978Schroeder Replaces CZ10 935125Schroeder Replaces CZ25 935126Schroeder Replaces CZ3 935124Schroeder Replaces DDS25 935135Schroeder Replaces DDS7 935134Schroeder Replaces DDZ3 935133Schroeder Replaces DS25 935132Schroeder Replaces DS3 935130Schroeder Replaces DS7 935131Schroeder Replaces J10 926557Schroeder Replaces J25 926558Schroeder Replaces J3 926556Schroeder Replaces JZ10 935137Schroeder Replaces JZ25 935138Schroeder Replaces JZ3 935136Schroeder Replaces K10 925520Schroeder Replaces K25 925773Schroeder Replaces K3 925772Schroeder Replaces KM74 925776Schroeder Replaces KSX3 932674QSchroeder Replaces KW 930156Schroeder Replaces KZX10 932676QSchroeder Replaces N10 936178Schroeder Replaces NNZX3 941461Schroeder Replaces SKB-1 936547Schroeder Replaces SKB-1 1/4 936548Schroeder Replaces SKB-2 936550Schroeder Replaces SKB-3 936551Schroeder Replaces 39QM150V 941697Schroeder Replaces 39QM60V 941698Schroeder Replaces 9V5Z10 941724QSchroeder Replaces KM25 941723Schroeder Replaces NNZX25 941725QSeparation Technologies Replaces ST6504 929323Separation Technologies Replaces ST6505 929324Separation Technologies Replaces ST6728 929310Separation Technologies Replaces ST6729 929322Separation Technologies Replaces ST7040 925582Separation Technologies Replaces ST7043 925385Separation Technologies Replaces ST7047 925394Separation Technologies Replaces ST7338 925792Separation Technologies Replaces ST7339 925793Separation Technologies Replaces ST7708 901106Separation Technologies Replaces ST7709 901473<strong>Filter</strong> Element <strong>Filter</strong> Element Competitor Parker PartCompetitor Part Number NumberSeparation Technologies Replaces ST7710 901493Separation Technologies Replaces ST7711 901494Separation Technologies Replaces ST7712 901535Separation Technologies Replaces ST7713 901536Separation Technologies Replaces ST7714 901619Separation Technologies Replaces ST7715 901620Separation Technologies Replaces ST7717 901826Separation Technologies Replaces ST7718 901856Separation Technologies Replaces ST7719 901857Separation Technologies Replaces ST7720 906460Separation Technologies Replaces ST7721 906461Separation Technologies Replaces ST7722 907088Separation Technologies Replaces ST7723 907090Separation Technologies Replaces ST7726 908642Separation Technologies Replaces ST7727 908643Separation Technologies Replaces ST7730 909293Separation Technologies Replaces ST7732 909299Separation Technologies Replaces ST7733 920022Separation Technologies Replaces ST7734 920523Separation Technologies Replaces ST7735 921085Separation Technologies Replaces ST7737 922623Separation Technologies Replaces ST7740 922627Separation Technologies Replaces ST7741 922661Separation Technologies Replaces ST7742 922671Separation Technologies Replaces ST7743 922785Separation Technologies Replaces ST7745 922789Separation Technologies Replaces ST7746 922793Separation Technologies Replaces ST7747 922932Separation Technologies Replaces ST7748 922933Separation Technologies Replaces ST7749 922938Separation Technologies Replaces ST7750 922955Separation Technologies Replaces ST7751 922972Separation Technologies Replaces ST7752 922973Separation Technologies Replaces ST7753 922978Separation Technologies Replaces ST7754 922991Separation Technologies Replaces ST7755 922993Separation Technologies Replaces ST7756 923007Separation Technologies Replaces ST7757 923008Separation Technologies Replaces ST7758 923009Separation Technologies Replaces ST7759 923012Separation Technologies Replaces ST7760 923013Separation Technologies Replaces ST7761 923035Separation Technologies Replaces ST7762 923041Separation Technologies Replaces ST7763 923047Separation Technologies Replaces ST7765 924448Separation Technologies Replaces ST7770 924455Separation Technologies Replaces ST7771 924456Separation Technologies Replaces ST7772 924500Separation Technologies Replaces ST7773 924730Separation Technologies Replaces ST7775 924734Separation Technologies Replaces ST7777 924738Separation Technologies Replaces ST7778 924739Separation Technologies Replaces ST7779 924790Separation Technologies Replaces ST7785 924797Separation Technologies Replaces ST7786 924798Separation Technologies Replaces ST7787 925036Separation Technologies Replaces ST7788 925037Separation Technologies Replaces ST7790 925052Separation Technologies Replaces ST7791 925572Separation Technologies Replaces ST7792 925576Separation Technologies Replaces ST7794 925771Separation Technologies Replaces ST7795 925835Separation Technologies Replaces ST7799 926856Separation Technologies Replaces ST7800 927092Separation Technologies Replaces ST7801 927093Separation Technologies Replaces ST7802 927267Separation Technologies Replaces ST7803 927268Separation Technologies Replaces ST7804 927269Separation Technologies Replaces ST7805 927584Separation Technologies Replaces ST7807932634QSeparation Technologies Replaces ST7809932636QSeparation Technologies Replaces ST7810 987141277Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MarinePARFITInterchangeable Element RangeThe marinereplacementsolutionNew to the PAR FIT family is arange of Marine Parfit Elements for anumber of the most popular marineelement competitors. Every MarinePAR FIT element is manufactured in<strong>Europe</strong> to the highest standards and isbacked by our unrivalled technicalsupport.You can reduce stockholdings, cutcosts and be sure of the ultimateperformance. Parfit filters are availablefrom ParkerStores and authoriseddistributors throughout <strong>Europe</strong>.www.parker.com/parfitwww.parkerhfde.com/parfitContact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comTypical Applications:• Industrial power units• Central lubrication systems• Diesel engine lubrication• Marine fuel systems• Power plants• Gearboxes• Wind turbineswww.parkerhfde.com278Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
FEATURES ADVANTAGES BENEFITSMicroglass III replacement elements Multi-layered design producinghigh dirt holding capacity and highefficiencyGreat performance valueCoreless Ecoglass III replacementelementsComplete performance datadisclosureElements manufactured to exactingstandards of original elementsWire support reduces pleat bunchingand keeps performance consistentNo metal content in elementReduced overall weight of 50%Easy compaction of used elementsEco adaptors availableAll pertinent information is provided inan easy to compare formatPerformance guarantee as good if notbetter than original fitReliable performance throughoutelement lifeReduces downtime and maximizeselement lifeEnvironmentally friendly disposal byincinerationLower element replacement costsLower disposal costsRetrofit coreless design to housingsalready installedNo hidden deficienciesEasy selection of correct interchangepart numberDurable, rugged and reliableconstruction with high qualitystandards<strong>Filter</strong> Element <strong>Filter</strong> Element ParkerCompetitor Competitor Part Number Part NumberBoll and Kirch 1143103 939319QBoll and Kirch 1174632 (11843 GEW.300/250 h=230, 37um) 939317QBoll and Kirch 1174804 (11843 GEW.300/40) 939312QBoll and Kirch 1179995 (11844 GEW.300/40) 939311QBoll and Kirch 1340006 (660-63 filter candle pleated 10 um) 939307QBoll and Kirch 1340009 (250-40 filter candle 25 um) 939305QBoll and Kirch 1340079 (294-31 filter candle 34 um) 939306QBoll and Kirch 1940971 (11443 GEW.324/34) 939310QBoll and Kirch 1940990 (11513 GEW.275/34) 939309QBoll and Kirch 1942562 (11445 GEW.155/100) 939318QBoll and Kirch 1943048 (11531 GEW.205/34) 939308QBoll and Kirch 1945279 (11531 GEW.205/40) 939314QBoll and Kirch 1946344 (11445 GEW.155/40) 939313QBoll and Kirch 1947342 (Ø=85, h=244, 40um) 939316QBoll and Kirch 1949798 (Ø=85, h=195, 40um) 939315QBoll and Kirch 7605706 (Flushing oil element 6.61.07 GR10-15, h=508+36) 939329QBoll and Kirch 7608089 (Flushing oil element 6.61.07 GR20, h=760+36) 939330QMore part numbers on the next page.279Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MarinePARFIT<strong>Filter</strong> Element <strong>Filter</strong> Element ParkerCompetitor Competitor Part Number Part NumberMann and Hummel BF-1018/1 939332QMann and Hummel H-1081 939321QMann and Hummel H-12178 939323QMann and Hummel H-12225 939324QMann and Hummel H-15111/2 939338QMann and Hummel H-15190 939331QMann and Hummel H-15222/2 939333QMann and Hummel H-18300 939327QMann and Hummel H-20211 939335QMann and Hummel H-25444 939334QMann and Hummel H-25595 939326QMann and Hummel H-25669 939325QMann and Hummel H-28545 939336QMann and Hummel H-601/4 939320QMann and Hummel H-930 939328QMann and Hummel P-19185 939337QPall HC8300FKN16H PR2798QPall HC8300FKN26H 939340QPall HC8300FKN39H 932873QPall HC8300FKP16H PR3455QPall HC8300FKP26H 939339QPall HC8300FKP39H 932872QPall HC8300FKS16H PR3456QPall HC8300FKS26H 937156QPall HC8300FKS39H 932874QPall HC8300FKT16H 933047QPall HC8300FKT26H 937158QPall HC8300FKT39H 932875QPall HC8304FKN16H 937165QPall HC8304FKN39H 937166QPall HC8304FKP16H 937167QPall HC8304FKP39H 937168QPall HC8304FKS16H 937169QPall HC8304FKS39H 937170QPall HC8304FKT16H 937171QPall HC8304FKT39H 937172QVokes B-62982 939303QVokes B-6358174 939301QVokes C-6352910 939322QVokes C-6360352 939304QVokes C-F7 939302Q280Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
The Par-Gel <strong>Filter</strong>Water Removal <strong>Filter</strong> ElementsStopping free watercausing systemdamageIncreases system efficiencyand machine productivityThe Par-Gel TM filter elements are aneffective tool in controlling waterrelated problems in hydraulic powerand lubrication systems. Increasessystem efficiency and machineproductivity and reduces the chanceof catastrophic system failure.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Par-Gel elements control water related problems inhydraulic power and lubrication systems.• Helps reduce component wear and system downtime.• Increases system efficiency and machine productivity.• Reduces the chance of catastrophic system failure.www.parkerhfde.com281Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
The Par-Gel <strong>Filter</strong>Water Removal <strong>Filter</strong> ElementsPar-Gel filter elements are an effective tool in controlling water related problemsin hydraulic power and lubrication systems.There is more to proper fluid maintenancethan just removing particulate matter. Youneed to remove water as well. Parker hasdeveloped Par-Gel water removal elementsto be used in combination with particulatefilters to provide significant benefits.Less component wear, consequentlyless component generatedcontaminants.Significant reduction of costly downtimeand replacement of failed components.Increased efficiency of the system,thereby improving machine productivity.Less frequent replacement and disposalof contaminated fluid.Reduced chance of catastrophic failure..10% Water1000 PPM.03% Water300 PPMWater as a contaminant.Whether you used a mineral-base or synthetic fluid, eachwill have a water saturation point. Above this point, the fluidcannot dissolve or hold any more water. This excessive wateris referred to as ‘free’ or emulsified water. As little as .03%(300 ppm) by volume can saturate an hydraulic fluid.Many mineral-base and synthetic fluids, unless specificallyfiltered or treated in some way, will contain levels of waterabove their saturation point.Water is everywhere!Storage and handling. Fluids are constantly exposed towater and water vapour while being handled and stored. Forinstance, outdoor storage of tanks and drums is common.Water settles on top of tanks and drums and infiltrates thecontainer, or is introduced when the container is opened toadd or remove fluid.In-service. Water can get into the system via worn cylinderand actuator seals, or through reservoir openings. Water cancome into contact with these entry points through water basedcutting fluids or when water and/or steam are used for cleaning.282Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationWater in the system creates oxides, slimes and resins.Corrosion is an obvious by-product and creates furthercontaminants in the system.The effect is compounded, as you now have both particulatecontaminant and water working together.The particulate contamination can be as simple as rust flakingfrom reservoir walls. Anti-wear additives break down in thepresence of water and form acids. The combination of water,heat and dissimilar metals encourages galvanic action. Pittedand corroded metal surfaces and finishes result.Further complications occur as temperature drops and thefluid has less ability to hold water. As the freeze point isreached, ice crystals form, adversely affecting total systemfunction. Operating functions may become slowed or erratic.Electrical conductivity becomes a problem when watercontamination weakens insulating properties of fluid(decreases dielectric kV strength).Testing your fluid for water.Condensation is also a prime water source. As fluid cools ina reservoir, the temperature drop condenses water vapour oninterior surfaces, which in turn causes rust. Rust scale in thereservoir eventually becomes particulate contamination in thesystem.A simple ‘crackle test’ will tell you if there is water in yourfluid. Simply take a metal dish or spoon with a small amountof fluid. Apply a flame under the container with a match. Ifbubbles rise and ‘crackle’ from the point of applied heat, youhave free water.Microbial growth as a contaminant.Once water enters a system, growth of micro-organismsbegins. Since water is one of the end products of thebreakdown of hydrocarbon fluid, once started, the process issomewhat self-sustaining.Slime is evidence of microbial growth, as is the apparentincrease in viscosity of the fluid, obnoxious odour anddiscoloured fluid. The results are: short fluid life, degradedsurface finish and rapid corrosion.Water generated damage and operating problems.CorrosionAccelerated abrasive wearBearing fatigueAdditive breakdownIncreased acid levelVisosity varianceElectrical conductivityForms of water in fluidDissolved water – below saturation pointFree water – emulsified or in droplets*.ParTest fluid analysis. For complete analysis, Parker offersPar-Test fluid analysis. Your Parker representative can supplyyou with a fluid container, mailing carton and appropriateforms to identify your fluid and its use. An independent labperforms complete spectrometric analysis, particle counts,viscosity and water content.Results are sent directly to the requester.* Excessive free water must be removed from the system beforefiltering is attempted. In systems with gross amounts of water (1% to2% by volume), settling or vacuum dehydration should be consideredbefore using Par-Gel filter elements.283Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
The Par-Gel <strong>Filter</strong>Water Removal <strong>Filter</strong> ElementsFeatures & BenefitsRemoving water.Using a Par-Gel water removal elementis an effective way of removingfree water contamination from yourhydraulic system. It is highly effective atremoving free water from mineral-baseand synthetic fluids.The Par-Gel filter media is a highlyabsorbent copolymer laminate with anaffinity for water. However, hydraulic orlubrication fluid passes freely throughit and the water is bonded to the filtermedia.How many filter elements will I need?Suppose you would like to remove water from contaminated oil stored in a 750litre tank. The tank is found to have 1000 ppm of water (very contaminated). Thecirculation rate will be 40 Ipm for the 40cSt fluid.Example: How many single length Modulflow elements will be needed to reducethe water to normal saturation levels. To find the answer, use the conversion chartsand capacity curves for the Modulflow element.1. 1000 ppm start – 300 ppm finish = 700 ppm removed2. 700 ppm water x 0.0001 = .07%.07% x 750 litres = 0.53 litres water total3. Capacity = 80cc at 40cSt & 40 Ipm to pressure drop of 1.7 bar.80cc per element x 0.0001 Iitres per cc = 0.08 Iitres per element4. 0.53 litres total water = 7 elements*0.08 Ipm/element* The replacement value of this fluid may range from €1500.00 to €4500.00 (€0.50 to €1.25 litre).An estimated element cost of €150.00 each, the saving could be as much as €3000.00!Using Par-Gel filter elements saves money in fluid and replacement componentcosts. Also, the frequency of fluid disposal and the problems associated with it aregreatly reduced.Photo above shows ‘dry’ Par-Gel filtermedia and the same media swollen withabsorbed water.Parker technology and expertise atyour disposal.Choosing the correct filters can savemoney and minimise problems causedby particulate and water contaminantsin hydraulic and lubricating fluids.Parker provides hard data and adviceon choosing from a wide range of filterconfigurations, flow patterns and flowpressure capabilities.Capacity (CC)5254503753002251507580CN-1/80CN-216cSt16cSt43cSt43cSt00 38 76 113 150 190Flow l/min<strong>Filter</strong> capacity. There are no accepted and approved water capacity testing orreporting standards. Consequently, there is virtually no way to compare one elementcapacity with another. It is also difficult to simulate a specific application in testing...making it hard to predict field performance.Why the discrepancies? Water removal media capacity is the result of the interplay offour variables: flow rate, viscosity, bypass setting and the media itself.Here’s an example: two identical elements, testing the same fluid, varying only theflow rate.This is a 15% reduction in capacity, due to changing only the flow rate! Now, look atwhat happens when the test flow rate is the same and the viscosity is changed.Element A Element A’Flow rate: 11 Ipm 38 IpmViscosity: 15 cSt 15 cStTest capacity: 425 ml 360 mlTwice the capacity can be achieved just by manipulating the test viscosity!Element B Element B’Flow rate: 76 Ipm 76 IpmViscosity: 40 cSt 15 cStTest capacity: 250 ml 550 mlNaturally, having a lower bypass valve setting limits the capacity. Since the life ofthe element is measured in pressure drop, using higher bypass valve settings willincrease apparent life (all other conditions equal).We recommend 1.7 bar bypass valves to get adequate life from Par-Gel filter elements.Capacity also depends on the media itself. That’s why Parker spent two yearsresearching the media used in Par-Gel filter elements. We tested all known media,and worked closely with our suppliers to achieve maximum water absorbency.284Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationHow we report:Our goal is to give our customers usable data. Why show testresults at a lower viscosity (13cSt for example), if the typicalapplication uses 41cSt fluid? So, we report at 41cSt to givetypical field application capacity, and 15cSt for competitivecomparisons. But keep in mind when comparing, you stillhave to consider flow rate.What it all means:You deserve to know how an element will work for you in yourapplications. So, we test and report our data in such a waythat it helps you predict element performance and life.Be wary of claims that say... “this element holds one litre(or 5 litres) of water”. What was the test flow rate? fluidviscosity? bypass valve setting? Was it run as a ‘single pass’or ‘multipass’ test?Rely on Parker to give you the facts and data you need. Ourgoal is to better protect your systems and components...andwe start up-front by telling you what you need to know.Is there any other way to do business?Add it all up.Broad selection, competitive prices, off-the-shelf availability,on-time delivery, high-efficiency filter media, reduced systemcontaminant and longer component life. When you add it allup, we think you’ll agree...Conversion FactorsIf you have: Multiply by: To get:mg/l 0.00009 %ppm 0.0001 %ml 1.0 ccgallons 4.54 litresTypical Saturation PointsFluid type PPM %<strong>Hydraulic</strong> 300 0.03Lubrication 400 0.04Transformer 50 0.005Parker Par-Gel water removal filter elements are available in these standard Parker filter housings:Fluid model series Length Element part number40CN-1 Single 93141240CN-2 Double 93141480CN-1 Single 93141680CN-2 Double 931418Guardian ® Single 932019Moduflow RFP 2-2 (10MFP) Double 940734Ideal Applications for Par-Gel filter elementsGuardian ® Portable Filtration SystemFiltration Trolley285Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Notes286Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Co-Polymerand Steel Reservoirs<strong>Hydraulic</strong> Reservoir SolutionsTailormadesolutions forreservoirsSupporting hydraulic systemdesigners with reservoirsolutionsAN INNOVATIVE GREENFILTER FEATURINGLEIF LEIF ®Parker hydraulic tank solutions applyto a wide variety of applications.Co-Polymer tanks that provide aunique potential to be ‘designedto fit’ an individual application andcost saving steel reservoir solutionsdeveloped to withstand extremeconditions.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Parker hydraulic tank solutions apply to a wide variety ofapplications.• Co-Polymer tank designs to meet OEM requirements.• Cost-saving and quality steel tanks.• On-board, integrated breathers, filters and level indicators.www.parkerhfde.com287Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Co-Polymer and Steel Reservoirs<strong>Hydraulic</strong> Reservoir SolutionsFeatures & BenefitsParker hydraulic tank solutions are applied toa wide variety of marketsHyd. & lube oil filtration Co-polymer tanks Steel tanksAgriculture X XConstruction equipment X XMarineXMaterial handlingXMiningXRoad building equipment X XTransportation X XWaste management /Environmental control X XAn introduction to Parker <strong>Hydraulic</strong> Reservoir SolutionsParker’s experience in designing fluid power equipmentwill help a system designer to save costs at every stage ofhydraulic system development.Co-polymer tank exampleOriginal EquipmentManufacturers arecontinually looking to reducemanufacturing costs andincrease operating efficiencyand it’s here that ParkerHannifin’s <strong>Europe</strong>an Filtration<strong>Division</strong> offers completesolutions. Beside high qualitysteel tanks supplied byParker and featured in thisbrochure, Parker also designsand supplies revolutionary,lightweight co-polymerreservoirs with tank topmounted or integrated filter andtank air filter options.Both tank types can typically represent a significantcontribution to cost savings. Because of the differing featuresand benefits between the metal and co-polymer tanks, Parkeris able to offer customers the most appropriate tank conceptto meet their specific requirements.Saving costs with complete Parker <strong>Hydraulic</strong> TankSolutions• A partnership in supply chain management reduces costs• An integration of reservoir functions• Reduction of component parts• Integrated hydraulic filter and air filter benefits• Integrated oil level measurement benefits• Standard & customised solutions offered• Flexibility related to shape & dimension of each tank• Leak-proof connections• Patented element for guaranteed quality filtrationSteel tank exampleTypical ApplicationsUnique tank solutions designed to meet customer needsToday Parker steel tank solutions are typically applied tocommercial vehicle applications for example waste managementand the transportation market. Customers manufacturing hookarmsystems, truck manufacturing or vehicle body builders arefurther examples of potential customers for a complete steel tankassembly.A more common use of co-polymer tanks can be seen in materialshandling equipment, agricultural and construction equipmentmarkets. Typical applications are warehouse trucks, smaller sizedwheeled loaders, telescopic handlers, dumpers, mini excavatorsand agricultural machinery.with the courtesyof Grove288Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationsProduct ArchitectureType of tank<strong>Filter</strong>s & accessoriesstandardsteel tankOn requestSteel orco-polymertankcustomisedco-polymertankStandardsteel tankIN-AGB with integrated breatherTPR I and IISR I and II seriesPT Tank Screw-in <strong>Filter</strong>Tank air filterIP65 compact seriesABL series thread mountedEAB series flange mountedETFTTFSR I and IITPR I and IISteel tank withintegrated optionsCo-polymer tank with integratedbreather and IN-AGB filterDesign aspects Co-polymer reservoir Steel reservoirExample of co-polymer tank with top mounted filters and air filtersComplicated shapesXStyling of reservoir meetsoverall styling of vehicleXWeight reductionXLong-term temperatures (depends ofTmin< -30°C or material properties) XTmax> +120°CHigh mechanical load on tank(tank contributes to strength of chassis)XAll-in-one conceptXHigh level of tankPressurisationXSuitable for heavy dutyequipment X XDesign note: All customised tanks are engineered solutions based ondetailed analysis of customer requirements and specifications.Detailed knowledge of co-polymer materials, implies that customisedmaterials can be made available to meet specific demands. Dependingon technical and commercial requirements, Parker is able to adviseeach customer individually, about the most suitable and economicalreservoir solution, made from co-polymer or steel.289Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Co-Polymer Reservoirs<strong>Hydraulic</strong> Reservoir SolutionsFeatures, Benefits & SpecificationsWhere a tailormade tank design is the solutionThe lightweight co-polymer tank is an all-in-one solution thatkeeps in mind a customer’s specific design requirements.Each tank is unique in terms of shape, dimensions andintegrated functions. It is equipped with an integrated tanktop mounted return line filter and tank air filter. All filtersand air filters are supplied as standard with the patented,environmentally friendly LEIF ® element.Reliable connectionsReliable, leak-proof connections have always been a criticalaspect for co-polymer tanks. Parker has developed atechnology using metal attachment components. All metalattachment components are moulded in with the co-polymertank wall, ensuring a reliable, leak-proof connection betweenthe tank and the components that are attached to it.Customised integrated metal attachment“Tank also features integrated level measurement”Level measurementOil level indication can be fully integrated into the tank design.This feature eliminates the need for level glasses, which arefragile and an additional potential source of leakage whenmounted incorrectly.Parker Filtration has designed high tech sealing solutions for tank topmounted filters.These attached connections (e.g. a suction connectionfor pumps, drains, vents, or a filler opening) can easily beachieved, as well as providing indications for minimum andmaximum oil levels. Metal attachment connections can bemade available for hose couplings, a flange attachment orthread attachment.Co-polymer reservoirs are designed to meet the stringentdemands of our customers. All relevant aspects are analysed,from material properties and operational conditions to dynamicload and requirements for equipment servicing.Example of customised co-polymer tank290Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Features, Benefits & SpecificationsIntegrated air breather(with optional water removal media)Air flow through air breather labyrinthReturn line connectionIntegrated return line filter type IN-AGB filter hasIn-to-Out flow directionPressure gauge or switchOil level indicationExample of a customised tank with an integrated return line filter and air filterThe ultimate all-in-one designA more frequent use of co-polymer tanks located onthe outside of mobile equipment often results in specificrequirements relating to styling.Despite the compact design of Parker tank top mounted filtersand air filters, these parts can influence aspects related tostyling or cabin accessibility.This concept is ideal for applications where space is at apremium.Parker Filtration’s unique all-in-one design, where the returnline filter and air filter are both located under one cover is aconcept that offers great possibilities related to tank styling.The high quality of the co-polymer material ensures a longtermstability of the chosen colour.This all-in-one design features the IN-AGB type return lineand integrated air filter with labyrinth. The labyrinth preventsoil leakage through the air filter. The connection(s) for returnline(s) and filler port are integrated in the tank. This avoidshaving to have hydraulic hoses placed on top of the tank.LEIF ® elements:• Environmentally friendly filtration• Re-usable steel element sleeve• Patented elements result in guaranteed quality of filtration• Saves element disposal costs typically by up to 50%• Supports ISO 14001 certificationEnvironmentally friendlyParker considers care for the environment as a socialobligation. The environmentally friendly LEIF ® element (LowEnvironmental Impact <strong>Filter</strong>) is applied to the return line filtersand breathers type ABL and EAB.What makes this element so special is that the metal sleevecan be re-used. As a result, this filter element component nolonger ends up in the waste disposal; only the contaminatedfilter medium is disposed of as chemical waste. With LEIF ®filter elements, the disposal and processing cost may bereduced by as much as 50%.The LEIF ® concept safeguards the use of genuine Parker parts.IN-AGB with LEIF ® elementCost-effectiveThe advantages of this co-polymer concept are obvious:• Lightweight• Flexibility with respect to tank shapes• Characteristics of plastic material can be customised tomeet specific requirements• Integration of several functions limits the use of individualcomponents• The tank can be purchased and supplied as a complete unit291Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Steel Reservoirs<strong>Hydraulic</strong> Reservoir SolutionsFeatures, Benefits & SpecificationsParker steel reservoirs withstand extreme conditionsStandard steel tanks are often specified for commercialvehicle side mounting. Parker steel tanks are built to last inextreme conditions. Extreme weather conditions and heavyduty vehicle movements can be resisted by our tank design.Quality designAs with co-polymer tanks, steel tanks offer leak proofconnections and are vigorously tested against leakage.Additionally, they are painted with primer and topcoat toensure maximum protection against corrosion.Diverse tank size options are availableWith space at a premium in most truck chassis configurationsand the need to deal with toolboxes, compressed airreservoirs and other equipment, tank dimensions are alwaysan issue. To meet the specific environment requirementsParker Filtration offers several tank sizes.Steel tanks are fully equipped. Our customers can choose froma wide choice of filter options. Parker considers care for theenvironment. The environmentally friendly LEIF ® element is alsoapplied to steel tank solutions. Additionally, Parker steel reservoirsare equipped with an efficient air filter, a level gauge, plugs,a suction kit and mounting brackets. The level gauge can bere-located on the other side of the tank if user visibility is an issue.Note: For further information about Parker steel reservoirsolutions, contact your local Parker Sales Company.To help reduce dirt build-up, our steel tanks are designed withsmooth corners and the upper front part of the tank can besloped which offers extra benefits:• Easier service access for the filter and tank air filter• Dirt, water, snow and ice will not adhere to the tank surfacenext to the breather and filterSuction port(s), covered with anti-vortex plate(s), allow low oillevels giving the operator an increased operational capacity.Before delivery the steel tanks are thoroughly washed insideand ready for system assembly.Steel tank with with customised chassis mounting strapsDetailed sectional view of Tanktopper II with integrated air filter292Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Environmental Air <strong>Filter</strong>sReservoir EquipmentWhen it comes to‘green’ breathingEcology and EconomyEAB Series and ABL Seriesenvironmental air filters providehydraulic system designers,OEM’s and end users eco-friendlyadvantages for a wide range ofmobile applications such as forestryequipment and industrial uses such asindustrial power units.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• EAB Series – air flows up to 1500 l/min. Visual gauge option.• ABL Series – 3 micron Abs. LEIF ® element. 2 sizes.• 2 environmental breather options suitable for mostapplications.www.parkerhfde.com293Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
EAB SeriesReservoir EquipmentTypical ApplicationsAgricultural machinesArticulated dump trucksForestry equipmentWheeled loadersLubricating systemsExcavatorsMobile cranesIndustrial power unitsTechnical DataThe filter has been designed to achieve a low pressure drop and highdirt holding capacity with airflows up to 1500 l/min. A compact EAB10with airflows up to 1000 l/min is also available.Construction:Glass reinforced composite housing with Eco-element.<strong>Filter</strong> media options:P020: High quality polyester media. 2μm (abs).C015: Polyester media with water-resistant layer. 1.5μm (abs)Q010: Glass fibre media. 1.0μm (abs)Mounting options:With 6 screws. Includes machine and plate screws, a strainer andgaskets.External threads G 3 /4”, G1”.Internal thread G 3 /4”.Pressure Drop CurvesOptions:Visual gauge type vacuum/pressure indicator.Overpressure valve, pressure setting 0.2 bar.EAB10 cannot be specified with an overpressure valve and vacuum/pressure gauge at the same time.Advantages of the EAB filters:Easy maintenance.Indicator states the need for element change.Quick and easy element change (no tools required).Environmentally friendly:EAB elements contains no metal parts: therefore it can be crushedand burned minimising the volume of waste material.Other features:The optional indicator is located in a safe place inside the housing.Housing includes mounting holes for a padlock, which allows you toincrease the security against theft and vandalism.Suitable for temperatures –20°C to +80°C.Δp total = Δp housing + Δp element. The recommended level of the initial pressure drop for this filter is max 0.02 bar (2.0 kPa).Δp (kPa)Δp (kPa)1098765432GE12GE16HC73100 200 400 600 800 1000 1200 1400 1600 1800 2000Flow (l/min)10987654321EAB10 Housing OnlyEAB20 Housing OnlyGE12GE16HC7300 200 400 600 800 1000 1200 1400 1600 1800 2000Flow (l/min)Δp (kPa)Δp (kPa)432C0151Q010P02000 200 400 600 800 1000 1200 1400 1600 1800 2000Flow (l/min)4EAB10 ElementsEAB20 Elements32C0151Q010P02000 200 400 600 800 1000 1200 1400 1600 1800 2000Flow (l/min)294Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationEAB10EAB20Optional indicatorØ114Optional indicatorØ114Holes for lockingHoles for locking68102Air flowQ = 1000 l/minmax* Optional mounting holes25Air flowQ = 1500 l/minmaxOptional overpressure valve43Ø73Ø90* Optional mounting holesG 3 /4Ø73Ø90* StrainerG 3 /4 or G1* Gasket* StrainerG 3 /4G 3 /4 or G1* Gasket9494* Comes with HC73* Comes with HC73Ø50Ø50NOTICE!Air filters are an essentialpart of the system andthe element needs to bereplaced regularly.6 hole fixing mountingdimensions556 x 60° Ø4 or M573Mounting6 mounting holesG1 externalG 3 /4 externalG 3 /4 internalCodeHC73GE16GE12GS12Note: Optional indicator scale –0.35/–0.2 to+0.2/+0.35 bar.Note: Optional mounting holes act as drainholes (except the HC73) in combination witha CO15 element.295Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
EAB SeriesReservoir EquipmentOrdering InformationStandard products tablePart numberSupersedesModelMediaMountingOverpressurevalveIndicatorReplacementelementsEAB20P020HC73V2EAB10P020HC73EAB20P020HC73EAB20P020GE16EAB20P020HC73AEAB20P020HC73-V2N/AN/AN/AEAB20P020HC73-AEAB20EAB10EAB20EAB20EAB20P020P020P020P020P020HC73HC73HC73GE16HC73V2AEAC20P020EAC10P020EAC20P020EAC20P020EAC20P020Product configuratorProduct numberMedia optionsMounting optionsOverpressure valve optionsIndicator optionsEAB20P0202μ abs polyesterHC736 hole fixingNo overpressure valveNo indicatorEAB10C015Q0101.5μ abs water resistant1.0μ abs glass fibreGE12GE16GS12ME33G 3 /4 externalthreadG1 external threadG 3 /4 internalthreadM33 x 2 externalthreadV20.2 barAVacuum/pressuregaugeReplacement elementsProduct numberMedia optionsEAC20P0202μ abs polyesterEAC10C0151.5μ abs water resistantQ0101.0μ abs glass fibreNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: For alternative part number options, consult Parker Filtration.296Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ABL SeriesReservoir EquipmentTypical ApplicationsThe Parker Filtration ABL-1 and ABL-2 Series Air <strong>Filter</strong>s.Saw millsAgricultural machinesArticulated dump trucksForestry equipmentWheeled loadersLubricating systemsExcavatorsIndustrial power unitsMobile cranesTechnical DataAssembly:Tank top mounted.Connections:Threads G1 1 /4 (ISO 228), 1 1 /2” (UN-16-2B).Seal material:Seals integrated in LEIF ® element.Operating temperature range:-20° to +80°C.Filtration media:3 micron abs (Beta value=ß75 ≥3inair).Flow fatigue characteristics:<strong>Filter</strong> media is supported so that the optimal fatigue life is achieved.Vacuum indicator:ABL-1 on request only, ABL-2 0.04 bar. Visual with latch outmemory.Breather housing:High impact strength composite.<strong>Filter</strong> element:LEIF ® element.Options:• Adaptor with filter connection.• Single adaptor.• Breather with integrated pressure relieve valve for pressurisedtank on request only.LEIF ® elements can be used for hydraulic fluids and HEES type fluidsonly. For other fluids contact Parker Filtration.Pressure Drop CurvesABL1Flow (US GPM)0 79 159 238 31739625.363ABL2Flow (US GPM)0 132 264 396 52866025.36320.2920.29Δp (mbar)1510.218.145Δp (PSID)Δp (mbar)1510.218.145Δp (PSID)5.0735.073000 150 300 450 600 750 900 1050 1200 1350 1500Flow (l/min)0 00 500 1000 1500 2000 2500Flow (l/min)297Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
ABL SeriesReservoir EquipmentSpecificationABL-1ABL-215 (noindicator)4(35.5)32105135.532163NOTICE!Air filters are anessential part ofthe system and theelement needs to bereplaced regularly.25Top view1ISO 228-G1 1 /4Optional: 1 1 /2-16UN-2B46 A/FØ1271 1 /2-16UN-2B(Optional: ISO 228-G1 1 /4)SLW46Ø12725Top viewExtensions and filling mounting adaptorsAdaptor singleAAdaptor with filler connectionA80456xØ7(PCDØ73)6xØ7(PCDØ73)Ø8522400951 /2” BSPØ85298Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard products tablePart numberSupersedesReplacement elementsABL1G114QXWL3ABL2G114QXWL13VABL2U112QXWL13VADAPTORABLG114FPABL1-G1 1 /4-QXWL-3ABL2-G1 1 /4-QXWL-1-3-VABL2-U1 1 /2-QXWL-1-3-VADAPTOR-ABL-G1 1 /4-FPQXWL3QXWL13QXWL13-Product configurator – Air BeatherProduct numberMounting optionsFiltration (3μm)IndicatorsOptionsABL11000 l/minG114ISO 228 - G1 1 /4 (BSP)QXWL3ABL1 OnlyNoneNoneABL22000 l/minU1121 1 /2 UN-16-2BQXWL13ABL2 OnlyVVisualSNGSingle adaptorFPAdaptor With FillerConnectionProduct configurator – AdaptorProduct numberMounting optionsOptionsAdaptor ABLG114ISO 228 - G1 1 /4 (BSP)SNGSingle AdaptorU1121 1 /2 UN-16-2BFPAdaptor With FillerConnectionReplacement elementsPart number SupersedesQXWL3QXWL-3QXWL13QXWL1-3Description3μ3μNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require youto contact Parker Filtration for availability.299Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TriceptorDesiccant Type BreatherKeeping waterand dust out of thereservoirA disposable air breathersolutionTriceptor desiccant type breathersare easy to fit and disposable assoon as the silica gel inside turnsto pink. Triceptor breathers havethree main functions; besides theremoval of small solid contaminationthey absorb water due to the highperformance silica gel desiccant. Thethird function is to reduce oil mistleaving the reservoir and going into theatmosphere.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Triceptor desiccant type breathers remove contamination,absorb water in the fluid and reduce oil mist leaving thereservoir into the atmosphere.• Triceptor breathers are easy to fit and disposable when thesilica gel turns to pink.• Cost effective Triceptor breathers are suitable for a widerange of mobile and industrial applications.www.parkerhfde.com300Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Breathers Desiccant TypeReservoir EquipmentSpecificationMaterials:Casing: Clarified copolymer polypropylene.Cap: Copolymer polypropylene.Stand pipe: PVC.Filtration Element: Polyester, silica gel.Operating Temperatures: -29°C(-20°F) to 121°C (250°F).Seals: None.Maximum Allowable Operating Pressure (MAOP): .34 bar (5 psi).Particle Removal Efficiency:98.7% (beta 75) @ 3 micron99.5% (beta 200) @ 4 micron99.9% (beta 1000) @ 5.3 micronWeight:934330T.57 kg (1.25 lbs.) each.934331T.79 kg (1.75 lbs.) each.934332T1.02 kg (2.25 lbs.) each.FeaturesFoam PadsIsolates the removal materials fromcontact with heavy reservoir mist andsecurely holds materials in place.Silica Gel DesiccantHas the highest removalcapability by volume of anyadsorption method. Indicatescondition by changing color.<strong>Filter</strong> PadsSpecially designed filter padsremove solid particulate on upstreamside and then regenerate by releasingthose particles when air flowreverses direction. Lower padremoves airborne contamination andsecond pad protects against anymigration of desiccant.Air IntakesA total of eight air intakes may beexposed to allow air to freely flow inand out of the Triceptor.Foam padInsures filter pad is properlypositioned and protects itfrom external damage.Molded HousingDurable shock absorbingcasing provides reliable serviceand simple press in mounting.301Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
TriceptorDesiccant Type BreatherInstallationTriceptor breathers are designed for simple installationon most equipment, regardless of mounting connection.Since TriCeptor breathers are disposable, the threadedconnection allows for quick and easy maintenance.Several mounting adapters (shown below) are availableto provide the desired mounting. The installation/replacementprocess consists of four easy steps:Air Flow PerformanceThe curves below show the air flow performance of thethree Triceptor breathers. To insure the longest lifepossible, the initial clean pressure drop should notexceed 0.103 bar.3.5 .2413.0.2071. Remove from protective plastic wrap.2. Remove 25mm blue cap from standpipe.3. Remove foil label to expose the necessaryamount of air intake holes.4. Twist Triceptor into mounting adapter.PSID2.52.01.51.0.5.172.138.103.068.034BARServicing the Triceptor breather is also very easy. Whenthe silica gel changes colour from blue to a pink, thebreather is no longer active and needs to be replaced.Simply remove the unit and discard properly.00 30 60 90 120 150GPM (fluid exchange rate)3.5 .2413.0.207101.64.0Note: Triceptor breathers comply with<strong>Europe</strong>an REACH regulationsPSID2.52.01.5.172.138.103BAR1.0.068.5.034127.05.0178.07.0229.09.000 4 8 12 16 20SCFM0 1.88 3.78 5.66 7.55 9.44Liters/Second41.661.6433.531.3298.553.881“ NPTThreadLinear Measurement= mminField AdapterModel Part Number Quantity127mm Breather 934330T 6 pcs.178mm Breather 934331T 6 pcs.229mm Breather 934332T 6 pcs.Field Adapter Nylon 937546 1 pc.302Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Glass-Filled Nylon andMetal BreathersIP65 Rated, Metal, Screw-on and LockablesReservoir EquipmentCompact andlightweightreservoir solutionsIP65 Co-polymer breathersand metal breathersThe IP65 rated range of moulded,non-corrodible, glass-filled nylon airbreathers combine strength witha lightweight design. Single hole,6-hole, 3-hole and screw-on optionsare available; plus metal air breather,filler breather and lockable optionsare a proven range of quality reservoirsolutions.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• Moulded in non-corrodible, glass-filled nylon – strong andlight.• Single hole, 6 hole and 3 hole installation.• Screw-on breather range – G½ and G¾ options.• Compact range – G¼, G 3 /8, R½ and R¾ options.• Metal filler breathers – pressurized threaded type.• Metal filler breathers – unpressurized threaded type.• <strong>Filter</strong> flange type.• Lockable range for reservoir security and oil protection.303Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
IP65 Rated Filler BreathersReservoir EquipmentSpecification for Single and 6 Hole InstallationOption 1Construction:Moulded in non-corrodibleglass-filled nylon combiningstrength with a lightweightdesign.Options:(1) single (63mm dia) holeFiller breather installation thateliminates drilled and tappedholes using self-lockingclamps.(2) 6 holeFiller Breather Installationthat uses 6xNo10threadforming screws.(3) 3 hole filler breatherutilises 3 x zinc and clearchromate plated steelscrews.Option 1 Filler Breathers (Single Hole Installation)Strainers:Unique design diffuses oilflow into the reservoir.(1) Single length inpolypropylene (95mm length)(2) 2-piece telescopic inpolypropylene (195mm lengthmax.)Filtration element:Expanded polyurethanefoam, 10 micron nominal.Seals:Nitrile.Working temperature:-30°C to +90°C.Pressurised filler breathers:Available in 3 pressureoptions to maintain a positivepressure in a reservoir.Pressurisation options:0.2, 0.35 and 0.7 bar crackpressure.Pressurisation valve:Nylon/Nitrile.Dipstick:Available for use with options1 and 2. Dipsticks areavailable in 2 lengths and inpacks of 10.Dipstick material:ABS.Hi/Lo indicators:Acetal. Adjustable Red/Greenlevel indicators.Dipstick lengths:200mm and 400mm.Breather weight:0.2Kg.Anti-splash feature:The unique design antisplashfeature is standardon all options 1 and 2 andallows for a dipstick to befitted if required.Ø101AB98XXX Pressurised Pressure Drop Curves1.216.91.0 0.7 Valve14.61677010 maxAAØ42Ø7.0bar bar0.80.60.40.20.2 Valve0.35 Valve000 5 10 15Flow I/sec (Air)AB98XXX Non-Pressurised Pressure Drop Curves0.250.200.150.10With Anti-Splash11.67.35.82.92.91.5Δp (PSID)Δp (PSID)Option 1. Single Hole Filler Breathers – PressurisedPart numberAB98212011AB98213011AB98212001AB98212021AB98213001AB98213021AB98217001AB98217011AB98217021SupersedesAB.98212011.UCAB.98213011.UCAB.98212001.UCAB.98212021.UCAB.98213001.UCAB.98213021.UCAB.98217001.UCAB.98217011.UCAB.98217021.UCNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Description 10μ abs.Pressurised 0.2bar with 95mm strainerPressurised 0.35bar with 95mm strainerPressurised 0.2bar without strainerPressurised 0.2bar with telescopic strainerPressurised 0.35bar without strainerPressurised 0.35bar with telescopic strainerPressurised 0.7bar without strainerPressurised 0.7bar with 95mm strainerPressurised 0.7bar with telescopic strainer0.05Without Anti-Splash000 5 10 15Flow I/sec (Air)Option 1. Single Hole Filler Breathers – Non-PressurisedPart numberAB98210011AB98210021AB98210001SupersedesAB.98210011.UCAB.98210021.UCAB.98210001.UCNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Description 10μ abs.Filler breather with 95mm strainerFiller breather with telescopic strainerFiller breather without strainer304Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Filler Breathers (6 Hole Installation)Option 2Note 1. Un-pressurised 6 hole fixing:Form 6 off tank mounting holes between Ø4.0 and 4.4mm (dependent on the material and thickness – see guide below)equispaced on 70-73mm P.C.D. to suit supplied No.10 thread forming screws.Note 2. Pressurised 6-hole fixing:Form 6 off tank mounting holes between Ø4.0 and Ø4.4mm (dependent on the material and thickness – see guide below)equispaced on 73mm P.C.D. to suit supplied No.10 thread forming screws.72Ø101Note 3. Reservoir mounting guideSheet thickness mmHole size mm1.2 4.02.0 4.103.15 4.304.0 4.305.0 4.40271Telescopic StrainerThe telescopic strainer designis ideal, where reservoir depthallows, to increase the surfacearea of the strainer, improvingstill further its straining ability,oil flow-through and allowing forlonger dipstick lengths.Option 2. 6 Hole Filler Breathers – PressurisedPart numberAB98817011AB98812001AB98812011AB98812021AB98813001AB98813011AB98813021AB98817001AB98817021Ø31Ø42SupersedesAB.98817011.UCAB.98812001.UCAB.98812011.UCAB.98812021.UCAB.98813001.UCAB.98813011.UCAB.98813021.UCAB.98817001.UCAB.98817021.UCNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Description 10μ absPressurised 0.7bar with 95mm strainerPressurised 0.2bar without strainerPressurised 0.2bar with 95mm strainerPressurised 0.2bar with telescopic strainerPressurised 0.35bar without strainerPressurised 0.35bar with 95mm strainerPressurised 0.35bar with telescopic strainerPressurised 0.7bar without strainerPressurised 0.7bar with telescopic strainer72Ø101Ø42Ø4495 72Option 2. 6 Hole Filler Breathers – Non-PressurisedPart numberAB98810001AB98810011AB98810021SupersedesAB.98810001.UCAB.98810011.UCAB.98810021.UCNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Description 10μ absFiller breather without strainerFiller breather with 95mm strainerFiller breather with telescopic strainerA73706x Ø 4.44.0305Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Filler BreathersReservoir EquipmentOption 3 Filler Breathers (3 Hole Installation)46Ø50.5Ø53New Options Fully TestedAs part of the design developmentprogramme for the new IP65 FillerBreathers, extensive performance andendurance testing was carried out toensure durability and efficiency.Ø2463.53x Ø 4.44.0A41.33-hole Filler Breathers (6-hole available)Part numberAB68110AB68118Description 10μ absFiller breather without strainerFiller breather with 95mm strainerNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Note 3: Not suitable for use with B.68206/207Note 4: 6-hole AB.68910/AB.68918 option available.Note:Form 3 off tank mounting holes between Ø4.0 and Ø4.4mm (dependent on thematerial and thickness – see chart for guide) equispaced on 41.3 P.C.D. to suit No.10 thread forming screws supplied.Dipstick OptionsDipstick OrderingPart numberB68206B68207SupersedesDIP.206DIP.207Description10 x 200mm Dipsticks10 x 400mm DipsticksNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.DipsticksThe dipstick, available in 2 lengths – 200mm and 400mm,can be cut to the required length or left as it is and the Hi/Lo indicators moved and positioned on the dipstick itself bysqueezing the sides of the indicator and repositioning alongthe dipstick.306Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Screw-On Type Air BreathersReservoir EquipmentStandard Screw-On Breathers - SpecificationOption 1– G 1 /2 and G 3 /4 (Ø101)Pressure Drop Flow CurveConstruction:Moulded in non-corrodible glass-filled nyloncombining strength with a lightweight design.Option 1:2 screw on type air breathers are available –G 1 /2 or G 3 /4 threaded base models.Filtration element:Expanded polyurethane foam, 10 micronabsolute.Seals:Nitrile.Working temperature:-30°C to +90°C.Pressurised air breathers:Available in 3 pressure options to maintain apositive pressure in a reservoir.Pressurisation options:0.2, 0.35 and 0.7 bar crack pressure.Pressurisation valve:Nylon/Nitrile.Dipstick:Available for use with all options. Dipsticksare available in 2 lengths and in packs of 10.Dipstick material:ABS.Hi/Lo indicators:Acetal. Adjustable red/green level indicators.Dipstick lengths:200mm and 400mm.Breather weight:0.2Kg.Anti-splash feature:The unique design anti-splash feature isstandard on option 1 and allows for adipstick to be fitted if required.AB98XXX Screw-on Non-Pressurised Pressure Drop Curves0.304.40.25G 1 /2Ø101Δp (bar)0.200.150.10With Anti-Splash2.91.5Δp (PSID)930.05Without Anti-Splash000 5 10 15Flow I/sec (Air)13 10G 1 /230 A/F HEXNote: For pressure drop information on the Option 1. Pressurised consult Parker Filtration.AOption 1–G 1 /2 or G 3 /4Part numberAB98610101AB98612101AB98613101AB98617101AB98410101AB98412101AB98413101AB98417101SupersedesAB.98610101.UCAB.98612101.UCAB.98613101.UCAB.98617101.UCAB.98410101.UCAB.98412101.UCAB.98413101.UCAB.98417101.UCDescription 10μ nomG 1 /2 Un-pressurisedG 1 /2 pressurised 0.2 barG 1 /2 pressurised 0.35 barG 1 /2 pressurised 0.7 barG 3 /4 Un-pressurisedG 3 /4 pressurised 0.2 barG 3 /4 pressurised 0.35 barG 3 /4 pressurised 0.7 barNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.G 3 /4AØ10116 1096G 3 /430 A/F HEX307Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Screw-On Type Air BreathersReservoir EquipmentCompact Screw-On Breathers - SpecificationOption 2 – G 1 /4, G 3 /8, R 1 /2 and R 3 /4 (Ø40)Construction:G 1 /4, G 3 /8, R 1 /2 and R 3 /4 cap and base plate mouldings in nylon 66.Element:Expanded Polyurethane foam, 10 micron absolute.Dipstick:Available for use with R 1 /2 and R 3 /4.Dipstick material:ABS.Hi/Lo indicators:Acetal adjustable red/green level indicators.Dipstick lengths:200mm and 400mm (packs of 10).Breather weights:0.028KgPressure Drop Flow CurveOrdering InformationΔp (bar)0.200.180.160.140.120.100.080.060.040.0200 0.5219G1/41151.0 1.5 2.0 2.5 3.0 3.5 4.004.5Flow I/sec (Air)Δp (PSID)Option 2–G 1 /4, G 3 /8, R 1 /2 and R 3 /4 (Packs of 10 only)Part numberAB683101AB68X101AB68Y101AB68Z101SupersedesAB.683101.UCAB.68X101.UCAB.68Y101.UCAB.68Z101.UCDescription 10μ absG 1 /4 Un-pressurisedG 3 /8 Un-pressurisedR 1 /2 Un-pressurisedR 3 /4 Un-pressurisedNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Note: For pressure drop information on G 3 /8, R 1 /2 and R 3 /4, consult Parker Filtration.Ø40G 1 /4 Ø40G 3 /820 A/F HEXG 1 /4Ø40614579R 1 /2 Ø40R 3 /46020 A/F HEXG 3 /812.560 5920 A/F HEX13.5 920 A/F HEX914R 1 /2R 3 /4308Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Screw-On Type Air Breathers - SpecificationOption 3–G 3 /8, G 1 /2 and G 3 /4 (Ø70)Construction:Mouldings in glass-filled nylon and glass coupled polypropylene.Element:Expanded Polyurethane foam, 10 micron absolute.Seals:Nitrile.Pressurised air breathers:Available G 3 /8, G 1 /2 and G 3 /4,3 pressure options to maintain a positive pressure in a reservoir.Pressurisation options:0.2, 0.35 and 0.7 bar crack pressure.Pressure Drop Flow CurvePressurisation valve:Nylon.Dipstick:Available for use with G 3 /8, G 1 /2 and G 3 /4.Dipstick material:Mini-series in brass.Hi/Lo indicators:Acetal adjustable red/green level indicators.Dipstick lengths:200mm and 400mm (packs of 10).Breather weights:0.075Kg, Mini-series – 0.019Kg.Ordering InformationΔp (bar)0.140.120.100.080.060.04G3/8G1/2G3/4Option 3–G 3 /8, G 1 /2 and G 3 /4Part numberAB685101AB687101AB686101SupersedesSAB.5101SAB.7101SAB.6101Description 10μ absG 3 /8 Un-pressurisedG 3 /4 Un-pressurisedG 1 /2 Un-pressurisedNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.0.0200 5 10 15 20 25Flow I/sec (Air)Ø70G 3 /8 G 1 /2Ø70The mini-series breatherScrew-on optionPush-fit option6868Ø208.5718.5208.5 12.512.5G 3 /828 A/F HEX G 1 /2 28 A/F HEXG 3 /4Ø70A7.810.5minØ22 SpotfaceØ16.0016.25Ø15.0015.10Ø11.8G 1 /43615°1.6Ø13.55Ø13.3530°15.5Part numberS680003DescriptionGearbox air breatherG 3 /431 A/F HEXA309Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Filler Breathers (Metal)Reservoir EquipmentMetal Airbreather/Filler breather SpecificationØ76.2Locking lugoption (5561)153.558.243.4For addedsecurity, certainParker FiltrationMetal FillerBreather <strong>Filter</strong>scan be specifiedwith a lockinglug option.Ø49.5Ø83Note: Dimensions relate to 1163 and 1730 options.Note: Max. operating temperature = +90°C.Ordering InformationStandard products tablePart number Supersedes Replacement cap Supersedes DisplacementI/minCrackpressureMicronratingAir flowm 3 /minThreadWeightSAB156210SAB156310AB116310AB1380105561PAB1730105PAB17301010SPA1731105SPA17311010SAB.1562.10SAB.1563.10AB.1163.10AB.1380.10N/APAB.1730.10.5PAB.1730.10.10SPA.1731.10.5SPA.1731.10.10N/AN/ACAP.116310CAP.138010N/ACAP.1730105CAP.17301010N/AN/AThreaded airbreather (unpressurised)Filler breather - filter flange type (unpressurised)N/A430N/AFiller breather - filter flange type (pressurised)CAP.1730.10.5 430 0.35 barCAP.1730.10.10 430 0.70 barAir breather - threaded type (pressurised)Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.N/AN/ACAP.1163.10CAP.1380.10N/AN/A430135430135430430N/AN/AN/AN/A0.35 bar0.70 bar10μ abs10μ abs10μ abs10μ abs10μ abs10μ abs10μ abs10μ abs10μ abs0.450.150.450.150.450.450.450.450.45G 3 /4G 1 /4N/AN/AN/AN/AN/AG 3 /4G 3 /40.20kg0.06kg0.24kg0.08kg0.24kg0.27kg0.27kg0.20kg0.20kg310Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
1731 - (Pressurised) - 1562 (Un-pressurised) - Threaded typeDisplacement:430 l/min.Micron rating:10μ absAir flow:0.45m 3 /min.Weight:0.2 Kg.Thread:G 3 /4.Valve crack-pressure 1731:0.35 and0.7 bar.43.46G 3 /4Ø76.21667.535 A/F HEX1563 - Threaded type (Un-pressurised)Ø44.5Displacement:1562 = 430 l/min.1563 = 135 l/min.Micron rating:10μ absAir flow:1562 = 0.45m 3 /min.1563 = 0.15m 3 /min.Weight:1562 = 0.20 Kg.1563 = 0.06 Kg.Thread:1562 = G 3 /4.1563 = G 1 /4.36.57G 1 /4/G 3 /41356.516 A/F HEX1380 - <strong>Filter</strong> flange typeØ44.5Displacement:135 l/min.Micron rating:10μ absAir flow:0.15m 3 /min.Weight:0.08 Kg.1104736.5Ø51Note: Tank hole diameter = 30mm.Note: Funnel diameter = 28mm.Tank installation notes1. Un-pressurised 6 hole fixing(Type 1163)Form off tank mounting holes betweenØ4.0 and Ø4.4 (dependant on the materialand thickness, consult Parker Filtration)equispaced on 70.0-73.0 P.C.D. to suitNo. 10 thread forming screws supplied.2. Pressurised 6 hole fixing(Type 1730)Form 6 off mounting holes betweenØ4.0 and Ø4.4 equispaced on 73.0P.C.D. to suitNo. 10 thread forming screws supplied.3. Un-pressurised 3 hole fixing(Type 1380)Form 3 off tank mounting holesbetween Ø5.25 – 5.35 mm equispacedon 41.3 P.C.D. to suitNo. 10 thread forming screws supplied.Breather UnitsOrdering InformationSmall BreatherSpecificationØ35Part numberH00279001H00279002H00279003SupersedesH00279-001H00279-002H00279-003DescriptionSmall breather 1 /4 BSPT threadSmall breather 3 /8 BSPT threadSmall breather 1 /2 BSPT thread22Three size:1/4” BSPT3/8” BSPT1/2” BSPT5311Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Lockable Filler BreatherReservoir EquipmentInstallation DetailsTank Mounting51.5Ø51Strainer7101503 off equispaced clampsØ 7876Tank mounting holeFlap to protect lockStand Pipe Mounting2 locking screws threaded type at positionsX and Y3 locking screws push on type at positionsX, Y and ZX50.5Z34107BYA1418114968Lockable Filler Breather SelectionTotal assembly pressure drop flow curve – 10μ elementsFlow (US GPM)0 132 264 3945280.06 0.8710μΔp (bar)0.040.020.580.29Δp (PSID)000 500 1000 1500 2000Flow (l/min)Ordering InformationPart numberLFC622142LFC622212LFC622242LFC622432LFC622122LFC622222LFC622411DescriptionNon-breathing (No element) Clamp mounting with strainer10μ nom element, G2 thread with strainer10μ nom element, clamp mounting with strainer10μ nom vented (air in) push on mounting with strainerNon-breathing (No element) 2 1 /2” BSP thread with strainer10μ nom element, G2 1 /2 thread with strainer10μ nom vented (air in) G2 thread without strainerNote 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.312Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Spin-On Air BreathersReservoir EquipmentHigh capacity airbreathersIdeal for high flow heavycontamination systemsSpin-on air filters for tank mountedbreathing solutions offer high capacity,disposable air breathers to removeairborne contamination. 2x5micronmodels are available – 700 l/min and1500 l/min ideal for high flow heavycontamination systems.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• High capacity air breathers to remove airbornecontamination.• Disposable, 5 micron nominal quality elements.• Models – 700, 1500, 1700 and 3000 l/min.• Ideal for high flow heavy contamination systems.www.parkerhfde.com313Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Spin-On Air BreathersReservoir EquipmentSpecificationHigh capacity air breathers designed for the removal of airbornecontamination in hydraulic systems to support environmentalmaintenance.Ideal for high flow systems and heavily contaminatedenvironments.Disposable spin-on elements quickly and easily replaced.5 micron nominal quality filtration elements.2 models available – 700 l/min and 1500 l/min.Available with a pressurised valve in the mounting adaptor.Standard spin-on air breather stemØ94Reservoir cutout Ø25 maximumACircuit symbol(standard)BAØ513 off M6 fixing holesequispaced on 41.3 P.C.D.BPressurised spin-on air breather stemReservoir cutout Ø25 maximum60Ø97Ø63.5Circuit symbol(pressurised)6Ordering Information3 off M6 fixing holesequispaced on 50 P.C.D.Note: Spin-on air breather elements canalso be mounted directly on to any suitablelength of 3 /4” BSP threaded pipe.5μ Spin-on air breathersPart number Supersedes Air flow Valve crackpressureAmmBmm Weight ReplacementelementS340056S340052S340058S340059S340054S340055N/AN/A*S.340058**S.340059*S.340054**S.340055700 l/min1500 l/min700 l/min700 l/min1500 l/min1500 l/minUnpressurisedUnpressurised0.35 Bar0.70 Bar0.35 Bar0.70 BarNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Note 3: Reservoir must be capable of withstanding pressurisation.6014860601481481202081201202082080.6Kg0.75Kg0.69Kg0.69Kg0.8Kg0.8Kg493058841049304930588410588410314Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
High capacity air breathers and filler/breathers designed for theremoval of airborne contamination in hydraulic systems to supportenvironmental maintenance.Ideal for high flow systems and heavily contaminated environments.Disposable spin-on elements quickly and easily replaced.3 micron absolute quality filtration elements.Models available – 1700 l/min and 3000 l/min.ØAØAMounting face for standard and large breather73 PCD Ø57 hole in tankBCBDE BSPTCØ88 boss or spot face(1.6 micron surface finish)6 fitting holesØ5.6 equispacedon 73 PCDStrainer 30 mesh(600 microns)Ø48Large breather filterSpecificationMaximum operating temperature:-20°C to +90°C.Construction materials:Epoxy coated steel components to resist corrosion.resistant paint finish on large breathers.Fluid compatibility:Suitable for use with mineral oils and water oil emulsions.Weights:Large:H00834001 1.0 KgH00834002 1.65 KgH00834003 1.90 KgEach breather filler is supplied with mounting gaskets andself-tapping screws.Ordering InformationLarge breather dimensionsPart number Supersedes Air flowl/minH00834004H00834005H00834-004H00834-00517003000Dimensions (mm) PortsA B C D E97134Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.14719813518030363/41 1 /4Large breather filler dimensionsPartnumberH00834001H00834002H00834003Supersedes Air flowl/minH00834-001H00834-002H00834-003170030003000Dimensions (mm)A B C97134134165204204114114203Replacementelement completewith bayonetH00834006H00834007H00834007SupersedesH00834-006H00834-007H00834-007315Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Fluid Level MeasurementFluid Level/Temperature GaugesReservoir EquipmentA proven solutionfor tank oil levelmeasurementUniversal fixing designed forfront or rear tank mountingFluid level/temperature gauges areavailable in 3 sizes each with 2-holemounting at 76mm, 127mm and254mm mounting centres. The highvisibilityviewing lens is a one-piecedesign for added security, moulded inshatterproof, transparent polyamide.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• 3 sizes of fluid level/temperature gauge. 2 hole mounting.• 76mm, 127mm and 254mm mounting centres.• A one-piece design, high-visibility viewing lens for addedsecurity.• Moulded in shatterproof, transparent polyamide.www.parkerhfde.com316Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationConstruction:Lens Transparent polyamide.Lens base Nylon 66.Shroud High impact polystyrene.No aluminium content.Bolts:Steel.Seals:Nitrile.Maximum working pressure:1 bar.Working temperature:-30°C to +90°C.Fluid compatibility:Mineral and petroleum based oils.Note:A 500mm model with metal shroud finishedin black available.Recommended bolt tightening torque:10 Nm maximum.Thermometer scale range:+30°C to +90°C.Temperature Indicator:Blue alcohol.Note:1. Locate seals in mounting recess beforefitting.2. Select the size required by studying theinstallation details to determine a partnumber.Size 1 Installation DetailsFor ‘through hole’ mounting:–Thread–Hole size M10 M12Preferred 11.0 13.0Maximum 13.0 14.0Torque = 10Nm maxFor tapped holes:Holes to be tapped square to mounting face.Tolerance on hole centres: +0.5-0.2For welded back nuts:The above details should be combined.Driveslot30184341.5BlacklineRedline11076 1717 A/F HEX18.5 24Installation and Application InformationSimple to InstallThe universal fixing is designed for either front or rear fixing.Just two holes in the tank – threaded for front fixing – and thegauge is ready to install. After positioning the gauge the boltsare simply tightened to provide a secure seal. There is no fearof leakage with the square section seals and the two-pointmounting system eliminates problems with tank distortion.M10 and M12 bolt thread options are available.Easy to ReadThe high-visibility lens is one-piece for added security andmoulded in shatterproof, transparent polyamide for anaccurate and clear oil level and temperature indication. Furthergauge protection is provided by a specially designed shroudmoulded in high-impact, black polystyrene.Size 1 Ordering InformationStandard products tablePart number SupersedesFL69121FLT.121FL69123FLT.123FL69111FL.111FL69113FL.113DesciptionFluid level/tempFluid level/tempFluid levelFluid levelCentres76mm76mm76mm76mmThreadM10M12M10M12Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Max temp90°C90°C90°C90°CWeight0.13Kg0.13Kg0.13Kg0.13Kg317Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Fluid Level/Temperature GaugesReservoir EquipmentSize 2 Installation DetailsDrive slot4318.52417Black line1617417127A/F HEXRed line2241.5Size 2 Ordering InformationStandard products tablePart number SupersedesFL69221FL69223FL69211FL69213FLT.221FLT.223FL.211FL.213DesciptionFluid level/tempFluid level/tempFluid levelFluid levelCentres127mm127mm127mm127mmThreadM10M12M10M12Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Max temp90°C90°C90°C90°CWeight0.15Kg0.15Kg0.15Kg0.15KgSize 3 Installation DetailsDrive slot4318.52417Blackline2022228825417A/F HEXRedlineSize 3 Ordering Information41.5Standard products tablePart number SupersedesFL69321FLT.321FL69323FLT.323FL69311FL.311FL69313FL.313DesciptionFluid level/tempFluid level/tempFluid levelFluid levelCentres254mm254mm254mm254mmThreadM10M12M10M12Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Max temp90°C90°C90°C90°CWeight0.23Kg0.23Kg0.23Kg0.23Kg318Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Reservoir Float &Level SwitchesReservoir EquipmentCost effectivereservoir solutionFloat switches designed foron-site adjustmentA range of high quality, adjustable floatswitches. A reliable design using reedswitches and available in 3 lengths– 500mm, 1000mm and 1500mm.additionally a capacitive level switch isavailable designed to detect the lossof fluid below its position in the tank.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Adjustable float switches – 3 lengths available.• Capacitive level switch designed to give a low level alarm.• High quality, adjustable float switches available in 3 lengths –500mm, 1000mm and 1500mm.• Capacitive level switch – rugged construction, simple toinstall and with no moving components.• Cost effective reservoir solutions with many applications.www.parkerhfde.com319Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
FL SeriesAdjustable Float SwitchReservoir EquipmentFeatures & BenefitsFloat Switch Features Include:Float switches can be adjusted on siteReliable design using reed switches3 lengths available, 500mm, 1000mm and1500mmThe FL Series is a range of vertically mounted, single floatlevel switches operating on the proven reed switch andmagnet principle.The FL Series float switch can be tailored by the user fora particular application, by adjusting the length of the floatswitch tube. It is also possible for the user to select theswitching configuration by inverting the float, giving eitheropen on rise or close on rise operation.The unit is supplied part assembled, with detailed instructionsfor the user to complete assembly to the specifications of theapplication and to install the unit.The FL Series is designed to be adjusted by the user to fittheir tank. The unit consists of a stem with the reed switchand float already set in position. The customer can cut thestem to fit their tank, and assemble it to the header. The unitis then ready to be fitted to the tank.The unit has a factory set “Open On Rise” switchingconfiguration, but this can be changed by reversing the float.Note: FL Series switches supplied as loose parts so no IP class applies. If assembledcorrectly by the customer, the IP class is IP67.Typical SpecificationInstallation DrawingInstallationMounting: 1” BSP threaded headerGasket:2.0mm thick sealing washerLength:Adjustable up to 1500mmElectrical specificationSupply voltage: 240 Vac maximum300 Vdc maximumSwitching current: 0.5AMaterial specificationHeader: Brass Stem: BrassFloat: Polypropylene Gasket: Klingersil grade C4324to BS7531 grade YOther parametersFluid types:Any liquids compatible with brass andpolypropyleneHEX 36 A/F35approx46566977Ordering InformationStandard products tablePart numberSupersedesFL050010RFL-0500-1-0RFL100010RFL-1000-1-0RFL150010RFL-1500-1-0RDesciption500mm long float level switch1000mm long float level switch1500mm long float level switchNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Customer Adjustable1” BSPP threadPolypropylene floatØ28.5320Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
CLS46Capacitive Level SwitchReservoir EquipmentFeatures & BenefitsFeatures Include:Rugged constructionSimple to installDelay circuitry prevents false alarmsPurely electronic, no moving componentsIntegrated test featureThe CLS46 Liquid Level Switch is an active device which isdesigned to give an alarm signal if fluid falls below a preset level.It will only give an output signal after a few seconds of low level toeliminate false alarms due to turbulence. The fact that the CLS46Series has no moving parts and incorporates a built in delaymeans that it is ideal in applications where mechanically operatedswitches mis-trigger due to vibration and fluid turbulence.The CLS46 Capacitive Level Switch is designed to detectthe loss of fluid below its position in the tank.The CLS46 Series has no moving parts and it is thereforesuitable for all applications, particularly where space andaccess inside a vessel is at a minimum.The CLS46 Series compliments the existing range of levelmeasurement instrumentation supplied by Parker Hannifin.Technical SpecificationInstallation DetailsDimensions: See drawingElectrical rating:Supply voltage: 7-40 Vdc Supply current: 3.0mAMax. load current: 1.0A Alarm delay time: 10.0 secondsConnections:V+: Positive power supplyGND: Negative power supply or GNDOutput: Transistor switched to GND on alarmTest: Ground to operateBody: Connected to groundFluid types:Mineral oils, typically used in engines or hydraulic actuatorscompatible with brass, PTFE and NBR.Construction:Body: Brass Probe: PTFETerminals: SAE CA210 brass, tin platedSeals:NBRConnector: 30% glass filled nylon 6Environmental ratingsMax. pressure: 5.0 bar (72 PSI)Temp. ranges: Fluid: -40°C to +130°CAmbient: -40°C to +100°CStorage: -50°C to +140°CSealing: IP67Vibration: 6g 10-50Hz (600-3000rpm)Shock: 50g, 6.3mSWeight: 53g3420.115.21/2” BSPT thread1.39” acrosscorners(HEX 1.2” A/F)24.531512.612.756.5Ordering InformationStandard products tablePart numberDesciptionCLS46Capacitive fluid level sensorCLS46Connector Capacitive fluid level sensor connectorNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Note 3: CLS46 does not include the connector.321Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Suction ElementsReservoir EquipmentProven solutionsfor oil reservoirefficiencyA range of quality fluidpower products for reservoirand system applicationA high quality range of productsdesigned to complete a reservoirinstallation including in-tank suctionstrainers and oil diffusers, metaland polyester in-line filters and drivecouplings with nylon sleeve andsintered steel couplings.Inline check valves, singlestation gauge isolator valve and63mm/100mm pressure gauges arealso available.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• In-tank suction strainers and oil diffusers.• Metal and polyester in-line filters and drive couplings.• Inline check valves.• Gauge isolator valves and 63mm/100mm pressure gauges.www.parkerhfde.com322Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Suction ElementsReservoir EquipmentSpecificationInstallation - Suction Elements Without BypassConstruction:Stainless steel media 30% glass filled nylonhead. Zintec centre tube.Epoxy adhesives.Maximum working temperature:90ºC.Maximum clear element0.04pressure drop:0.03 bar.0.03Filtration media:125 micron*.0.02Flow range:15-500 l/min (for 30cst).0.01Bypass rating:0.17 bar.Δp (bar)SE.1319Mounting threads:G 1 /2 up to G3.* Non-standard elements are available toorder. Consult Parker Filtration.0 13 26 39 53 66 79 92 106 119 1320.58SE.1320SE.1457SE.1323Flow (US GPM)000 50 100 150 200 250 300 350 400 450 500Flow (l/min)Installation - Suction Elements with BypassSE.1324SE.1326SE.1219SE.1220SE.12210.440.290.15Δp (PSID)AC A/F HEXAC A/F HEXØBØBMounting threadMounting threadCircuit symbolOrdering Information - Without BypassCircuit symbolStandard products tablePart number Supersedes Flowl/minSE75111110SE75221110SE75231210SE75351210SE75351310SE75361410SE75461210SE75471310SE75481410SE.1319SE.1320SE.1457SE.1323SE.1324SE.1326SE.1219SE.1220SE.122115255095130180225350500PortsBSP1/23/411 1 /21 1 /2222 1 /23Micronrating125125125125125125125125125Dimensions (mm)A B C105.5109.5139.5140200260150212272Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.4664648686861501501503646556565757090100Weight0.080.150.170.280.330.400.640.720.92BypassratingN/AN/AN/AN/AN/AN/AN/AN/AN/AOrdering Information - With BypassStandard products tablePart number Supersedes Flowl/minSE75111111SE75221111SE75231211SE75351211SE75351311SE75361411SE75461211SE75471311SE75481411SE.5100SE.5101SE.5102SE.5103SE.5104SE.5105SE.5106SE.5107SE.510815255095130180225350500PortsBSP1/23/411 1 /21 1 /2222 1 /23Micronrating125125125125125125125125125Dimensions (mm)A B C105.5109.5139.5140200260150212272Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.4664648686861501501503646556565757090100Weight0.080.150.170.280.330.400.640.720.92Bypassrating0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar323Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
DiffusersReservoir EquipmentInstallation Details<strong>AS</strong>pecificationConstruction:Zintec body.30% glass-filled nylon head.Zintec end cap.Epoxy adhesives.Flow range:50 l/min up to 454 l/min (For 30cSt).Mounting threads:G 3 /4 up to G2.Temperature:+ 90°C max.Mounting threadØBC A/F HEX120° plain areaOrdering InformationThe effect of fitting a diffuserNote: When installing a diffuser theplain area on the outside must befacing the pump inlet.Note: For information relating tomaximum differential pressureover the diffuser, consult ParkerFiltration.The benefits of specifying a Parker Filtration DiffuserInstalling a Parker Filtration Diffuser in a hydraulic reservoir isa simple operation that can make a big difference to systemefficiency.With its special concentric tubes designed with dischargeholes 180° opposed fluid aeration, foaming and reservoir noiseare reduced and pump life extended by reducing cavitation tothe pump inlet.Diffusers manufactured to customer specifications and othersizes of diffusers are available.Standard products tablePart numberFlowl/minPortsBSPDimensions (mm)A B CWeight22012202221022031142275045411 1 /23/4212717812024286866286556546750.420.560.270.69Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.324Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Inline <strong>Filter</strong>sReservoir EquipmentMetal Inline <strong>Filter</strong> - SpecificationConstruction:Head – zinc.Bowl – AluminiumBS1470/1050A. 1987.Element:Zintec/Stainless steel.125 micron*.Installation DetailsG1Max. flow:90 l/min.Max working pressure:7 bar.Thread:G1.Working temperature:-30°C to +80°C.Seal:Nitrile.Bowl tightening torque:12 Nm.<strong>Filter</strong> SelectionTotal assembly pressure drop flow curveOil Viscosity 30 cSt Relative density 0.856Flow (US GPM)Flow direction:From outside to inside.Weight:1.5 Kg.*Alternative media can bespecified.2448Circuit symbol0 5 11 16 21 26 31 37 420.5 7.32161011624Δp (bar)0.40.30.25.84.42.9Δp (PSID)990.11.5160Minimum for bowlremovalØ78.55448562 off fixingholes Ø7.2000 20 40 60 80 100 120 140 160Flow (l/min)Ordering InformationStandard products tablePart number Flow l/minThreadBSPMicronratingReplacementelementSupersedesNon-Corrodible Inline <strong>Filter</strong> - SpecificationIL1115 90 G1 125 EIL1115 E.IL.1115Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.G1Ø74630215609Construction:Housing and bowlmoulded in polyester.Element:Stainless steel mesh.125 micron*.Max. flow:120 l/min.Minimum for bowlremovalOrdering InformationStandard products tableInstallation DetailsØ4563Ø90102Inlet22 A/F HEXPart number Supersedes ThreadBSP54.530112ApplianceMax working pressure:7 bar.Thread:G1.*For alternative mediaconsult Parker FiltrationNote: When using withwater, protect from2 off fixingholes Ø7.54957Circuit symbolMicronratingWeightΔp (bar)freezing.Working temperature:-30°C to +80°C.(+60°C water).Seal:Nitrile.Bowl tightening torque:12 Nm.Total assembly pressure drop flow curveOil Viscosity 30 cSt Relative density 0.856Replacementelement0.2000 20 40 60 80 100 120 140 160Flow (l/min)Bowl tightening note:A box or ring spanner isrecommended.Flow direction:From outside to inside.Weight:0.5 Kg.0 5 11 16 21 26 31 37 421.014.50.80.60.4Flow (US GPM)11.68.75.82.9Δp (PSID)IL761151IL761251IL.1151IL.1251Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.11OilWater1251250.50.5325R.76115R.76125Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Drive CouplingsReservoir EquipmentTechnical DataMaterialsCoupling halvesSintered SteelSleeveNylon 66Max temp sleeve83°CTo select coupling model check application to establishrunning load condition.Check chart for factor (F) and apply factor (F) to *Rating ofcoupling formulae. This answer you now apply to *Rating/100rev/min below.It is advisable always to check shaft sizes being used onapplication and check with dimension ‘H’.Installation DetailsFactor (F)Application Electric motor Petrol/diesel engineUniform load 1.00 1.20Medium shock 1.25 1.50Heavy shock 1.75 2.00HP of application x 100 x F*Rating of coupling= rev/min of applicationFGHub withdrawalclearanceA<strong>AS</strong>ectioned detailØJØHØCØBEGrub screw positionDMax *Rating/ –H– Jspeed 100 rev/min Weight A B C D E F G max min pilotPart number prefix rev/min kW hp mm mm mm mm mm mm mm bore bore boreDC28*DC42*DC55*5000 0.75 1.00 0.4 40.0 66.0 44.5 38.0 4.0 104.0 84.0 28.0 10.0 7.05000 1.32 1.75 0.75 42.0 90.0 60.0 42.0 4.0 115.0 88.0 42.0 14.0 10.54000 6.00 8.00 2.05 59.0 125.0 83.0 65.0 4.0 158.0 122.0 55.0 19.0 16.0 min38.1 maxHeight of keyway from base of boreMetricImperialStandard bore BS 4500, (1985) BS 1916, Part 1, (1985)Standard keyway BS 4325, Part 1 (1980) BS 46, Part 1, (1985)Ordering ExamplesParker Filtration drive coupling components are orderedseparately. Here are three examples of complete assembliesordered this way.1. Complete assembly – DC28M14B04KMade up of a DC28M14DC28B04KDC28.S (Sleeve)Complete model DC28 drive coupling: One gear hub has14mm bore with 5mm wide keyway and other hub has a 1 /2”bore with 0.125” wide keyway.Both hubs supplied with locating grub screw.Assembly data1. Maximum angular misalignment is ±2°. Maximum radial misalignment is ±0.4mm.2. Ensure that the Parker Filtration drive coupling gear hubs are an easy fit to their respective shafts.Do not use heavy blows to force the hubs on.3. When in position, the hubs should have a gap of 4mm as denoted by ‘E’ dimension.4. Tighten grub screws to locate both gear hubs on to their respective shafts.2. Complete assembly – DCR42PBPBMade up of 2x DCR42PB’sDC42S (Sleeve)Complete model DC42 drive coupling: Both gear hubs havepilot bore of 10.5mm. Not supplied with grub screws.3. Complete assembly – DCR55PBB12KMade up of a DCR55PBDC55B12KDC55S (Sleeve)Complete model DC55 drive coupling: One gear hub pilotbored 5 /8”, the other hub pilot bored 1 1 /2”. Latter only suppliedwith grub screw.326Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Drive CouplingsReservoir EquipmentOrdering InformationModel DC.28Part number Supersedes Ø BoreKeyway Weight(mm)Width (mm) Height (mm)DC28M16DC28M19DC28M20DC28M22DC28M24DC28M25DC28M28DCR28PBDC28SDC28M10DC28M11DC28M14DC28M18DC28B03KDC28B04KDC28B05KDC28B06KDC28B07KDC28B08KDC28B09KDC.28.M16DC.28.M19DC.28.M20DC.28.M22DC.28.M24DC.28.M25DC.28.M28DCR.28.PBDC.28.SDC.28.M10DC.28.M11DC.28.M14DC.28.M18DC.28.B03KDC.28.B04KDC.28.B05KDC.28.B06KDC.28.B07KDC.28.B08KDC.28.B09K16.0mm19.0mm20.0mm22.0mm24.0mm25.0mm28.0mm8.0mmN/A10.0mm11.0mm14.0mm18.0mm7 /161/25/83/47/811 1 /85.0mm6.0mm6.0mm6.0mm8.0mm8.0mm8.0mmN/AN/A3.0mm4.0mm5.0mm6.0mm0.125 ins0.125 ins0.188 ins0.188 ins0.250 ins0.250 ins0.313 ins18.4mm21.9mm22.9mm24.9mm27.5mm28.5mm31.5mmN/AN/A11.5mm12.9mm16.4mm20.9mm0.50 ins0.57 ins0.72 ins0.84 ins0.99 ins1.12 ins1.24 insRangefrom 0.259Kgto 0.411KgModel DC.42Part number Supersedes Ø BoreKeywayWeight(mm)Width (mm) Height (mm)DC42M25DC42M28DC42M30DC42M35DC42M38DC42M42DCR42PBDC42SDC42M18DC42M19DC42M20DC42M22DC42M24DC42M32DC42B05KDC42B06KDC42B07KDC42B08KDC42B09KDC42B10KDC42B11KDC42B12KDC42B13KModel DC.55DC.42.M25DC.42.M28DC.42.M30DC.42.M35DC.42.M38DC.42.M42DCR.42.PBDC.42.SDC.42.M18DC.42.M19DC.42.M20DC.42.M22DC.42.M24DC.42.M32DC.42.B05KDC.42.B06KDC.42.B07KDC.42.B08KDC.42.B09KDC.42.B10KDC.42.B11KDC.42.B12KDC.42.B13K25.0mm28.0mm30.0mm35.0mm38.0mm42.0mm12.0mmN/A18.0mm19.0mm20.0mm22.0mm24.0mm32.0mm5 /83/47/811 1 /81 1 /41 3 /81 1 /21 5 /88.0mm8.0mm8.0mm10.0mm10.0mm12.0mmN/AN/A6.0mm6.0mm6.0mm6.0mm8.0mm10.0mm0.188 ins0.188 ins0.250 ins0.250 ins0.313 ins0.313 ins0.375 ins0.375 ins0.439 ins28.5mm31.5mm33.5mm38.5mm41.5mm45.5mmN/AN/A20.9mm21.9mm22.9mm24.9mm27.5mm35.5mm0.72 ins0.84 ins0.99 ins1.12 ins1.24 ins1.37 ins1.49 ins1.61 ins1.76 insRangefrom 0.436Kgto 0.753KgPart number Supersedes Ø BoreKeywayWeight(mm)Width (mm) Height (mm)DCR55PBDC55SDC55M25DC55M28DC55M30DC55M32DC55M35DC55M38DC55M42DC55M55DC55B09KDC55B10KDC55B11KDC55B12KDC55B13KDC55B14KDC55B15KDC55B16KDC55B17KDCR.55.PBDC.55.SDC.55.M25DC.55.M28DC.55.M30DC.55.M32DC.55.M35DC.55.M38DC.55.M42DC.55.M55DC.55.B09KDC.55.B10KDC.55.B11KDC.55.B12KDC.55.B13KDC.55.B14KDC.55.B15KDC.55.B16KDC.55.B17K16.0mmN/A25.0mm28.0mm30.0mm32.0mm35.0mm38.0mm42.0mm55.0mm1 1 /81 1 /41 3 /81 1 /21 5 /81 3 /41 7 /822 1 /8N/AN/A8.0mm8.0mm8.0mm10.0mm10.0mm10.0mm12.0mm16.0mm0.313 ins0.313 ins0.375 ins0.375 ins0.439 ins0.439 ins0.501 ins0.501 ins0.626 insN/AN/A28.5mm33.5mm33.5mm35.5mm38.5mm41.5mm45.5mm59.5mm1.24 ins1.37 ins1.49 ins1.61 ins1.76 ins1.89 ins2.01 ins2.13 ins2.31 insRangefrom 1.248 Kg– 2.046 Kg327Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Note 3:* Width and height apply to dimensions of the Keyway.Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MulticlampPipe Clamp SystemA ‘fit for purpose’pipe clampingsystemLeak free, noise free andvibration free pipe clampingMulticlamp is a system ofcomponents, each one engineered toa high standard – that together buildto provide effective, all-purpose pipework clamping. Available as singleclamp, double clamp, 12 or 16 holeMulticlamp, there is a complete rangeof split bushes to accept pipe or hosediameters from 6mm up to 50mmfrom 3 x Series of Multiclamp.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• High quality pipe clamping system in 3 ranges - Series 10,16 or 32.• Pipe or hose diameters from 6mm up to 50mm.• 26 different diameter, high quality split rubber bushes.• Zinc plated steel construction with anti-corrosive, fullpassivate.• Stainless Steel clamp available.www.parkerhfde.com328Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Planning with MulticlampWhen only the best ClampingSystem will do ....specify MulticlampMulticlamp is a system. A system ofcomponents, each one engineered toa high standard – that together build toprovide effective, all-purpose pipeworkclamping. Multiclamp offers creativeand cost-effective environmentalbenefits to the system designer andinstaller. Creating accurate runs ofvarying diameter tubes, pipes, hosesand cables in all industries.Secure Multiclamp installationsensure a leak free, noise free andvibration free system.The neat design of pipe line runs offerseasy maintenance of machinery andplant equipment. Visual planning of lineruns is straightforward with Multiclamp– accurate installations can be achievedwithout skilled labour – keeping costsdown and quality up.These notes have been compiled to assist in planning yourMulticlamp system.Multiclamp offers considerable flexibility. For example, it can fitin with a factory installation that is being built in phases.Should a last minute change in pipe diameter occur duringinstallation, an alternative rubber bush is likely to be all that isrequired. Not a complete and expensive re-think of the installation.Multiclamp metal components can be sprayed to match avehicle livery or plant installation and, if installed properly,should require no maintenance.Installation is simple and requires no experienceAnyone can use Multiclamp and only the basic, everyday toolsare required.From one pipe to almost any number – because each Multiclamp‘position’ can be visually sighted and its position adjusted – analmost guaranteed straight run can be obtained. Equally, changesof plane or direction can be achieved simply and securely.Group pipe sizes together to obtain the most economical useof three basic Multiclamp Series.Some sites will require all pipes mounted in one single plane –either vertical or horizontal.When stacked modules are preferred, the only work to bedone on the Multiclamp is to saw off the desired length.If a large number of pipe lines are to be run, it is recommendedthat the upper clamping unit is simply cut into two lines only,and progressively assembled by securing two pipes at a time.It will be recognised that most odd lengths on site will be used,and one man can easily cope with a large number of pipe linesby this simple progressive build up. This assembly will provideeasy access for servicing and replacing pipes. This methodalso reduces the quantity of Stacking Nuts and Studs by 50%.If a factory installation is being built in phases, it would bewise to leave the first phase with a lower clamping unit andStacking Nuts in position ready to receive pipe runs for thenext building phase.Series 106.0mm-20.0mm( 1 /4”- 3 /4”)Series 166.0mm-28.0mm( 1 /4”-1”)Stacked modules or single moduleSeries 3210.0mm-50.0mm( 3 /8”-2”)Fixing points to suitYour maximum pipe size will determine the series to use. There is adegree of versatility provided by the rubber bushes. You choose fromsingle or multistacked Multiclamp, whichever suits your particularinstallation requirements.Stacking stud andnut not requiredin this position329Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MulticlampPipe Clamp SystemSpecificationDimension details supplied in product configuratorSingle ClampB C CTS ( B )Double ClampØB C C BA<strong>AS</strong>eries 10PAT.1170557EF REFFEDMulticlamp – 12 or 16 holesSplit Bushes1 set of clamping units = 1 pair Split bushes are ordered in sets onlyi.e. 1 set of bushes = 10 bushes of one sizeCABThetfordEnglandSeries 10PAT.1170557ØBPipe sizeH REFGAØDEFMaterial SpecificationsZinc plated steel with anti-corrosive, full passivate. Multiclampcan also be multi-stacked using stacking studs and nuts.Series 10 and 16 clamp is supplied in lengths of 603mm andSeries 32 in lengths of 1206mm. These can be simply cut tothe required lengths for installation.Note: For stainless steel version please consult Parker.Series 10 will accept pipe or hose diameters from 6mm upto 20mm maximum. Series 16 from 6mm up to 28mm andSeries 32 from 10mm up to 50mm. Across the 3 Series, thereare 26 different high-quality split rubber bushes to select fromto cope with any combination and number of different pipeand hose diameters in the same run.Stacking Nuts Stacking Studs Mounting Adaptors Weld PlateABThreadThreadBAØABCDBFE<strong>AS</strong>tacking nuts are ordered in sets only.i.e. 1 set of stacking nuts= 50 stacking nuts of one size.Stacking studs are ordered in setsonly. i.e. 1 set of stacking studs= 50 stacking studs of one size.Mounting adaptors are not orderedin sets. i.e. 1 off mounting adaptors= 1 single piece.Weld plates are ordered in sets only.i.e. 1 set of weld plates= 10 weld plates.330Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering Information - Series 10Product configuratorPart number Supersedes Description PackDimensions (mm) ThreadquantityA B C D E F G H ØMC101MC102MC1016MCN10MCS10MCWP10MCSB10MCB10MOMC.10.1MC.10.2MC.10.16MC.N.10MC.S.10MC.WP.10MC.SB.10MC.B.10.MOSingle clampDouble clamp16 bay clampStacking nutStacking studWeld plateStandard boltMounting adaptor10 pairs10 pairs1 pair50501050125.025.034.011.032.013.327.08.58.538.133.021.025.025.038.138.125.02.610.055.093.015.06.319.019.038.125.038.038.0601.58.519.038.09.09.09.08.7M8 x 1.25M8 x 1.25M8 x 1.25Packweight0.60 Kg1.00 Kg0.80 Kg0.80 Kg0.50 Kg0.35 Kg0.55 Kg0.02 KgPart number Supersedes Description Pack Dimensions (mm) Pipe sizeMCG105MCG106MCG108MCG1010MCG1012MCG104MC.G.10.5MC.G.10.6MC.G.10.8MC.G.10.10MC.G.10.12MC.G.10.4Split bushSplit bushSplit bushSplit bushSplit bushSplit bushquantity101010101010A25.525.525.525.525.525.5B27.027.027.027.027.027.0(mm)81012-1415-1618-206OD5/163/81/25/83/41/4Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Packweight0.13 Kg0.12 Kg0.12 Kg0.10 Kg0.90 Kg0.13 KgOrdering Information -Product configuratorSeries 16Part number Supersedes Description PackDimensions (mm) ThreadquantityA B C D E F G H ØMC161MC162MC1612MCN16MCS10MCWP10MCSB10MCB16MOMC.16.1MC.16.2MC.16.12MC.N.16MC.S.10MC.WP.10MC.SB.10MC.B.16.MOSingle clampDouble clamp12 bay clampStacking nutStacking studWeld plateStandard boltMounting adaptor10 pairs10 pairs1 pair50501050125.025.047.011.032.013.327.07.07.050.844.021.025.036.050.850.825.02.610.065.0116.021.06.323.823.850.825.047.647.6608.88.525.051.09.09.09.08.7M8 x 1.25M8 x 1.25M8 x 1.25Packweight0.80 Kg1.60 Kg1.00 Kg1.06 Kg0.50 Kg0.35 Kg0.55 Kg0.06 KgPart number Supersedes Description Pack Dimensions (mm) Pipe sizeMCG165MCG166MCG168MCG1610MCG1612MCG1614MCG1616MCG1618MCG164MC.G.16.5MC.G.16.6MC.G.16.8MC.G.16.10MC.G.16.12MC.G.16.14MC.G.16.16MC.G.16.18MC.G.16.4Split bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushquantity101010101010101010A35.435.435.435.435.435.435.435.435.4B27.027.027.027.027.027.027.027.027.0(mm)81012-1415-1618-2022.025.028.06OD5/163/81/25/83/47/811/4Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Packweight0.28 Kg0.28 Kg0.26 Kg0.22 Kg0.20 Kg0.18 Kg0.14 Kg0.16 Kg0.28 Kg331Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MulticlampPipe Clamp SystemOrdering Information -Product configuratorSeries 32Part number Supersedes Description PackDimensions (mm) ThreadquantityA B C D E F G H ØMC321MC322MC3216MCN32MCS32MCWP32MCSB32MCB32MOMC.32.1MC.32.2MC.32.16MC.N.32MC.S.32MC.WP.32MC.SB.32MC.B.32.MOSingle clampDouble clamp16 bay clampStacking nutStacking studWeld plateStandard boltMounting adaptor10 pairs10 pairs1 pair50501050140.041.072.013.038.017.540.09.49.476.271.522.032.058.076.276.240.04.012.095.0171.034.08.038.038.076.232.076.276.21211.011.038.577.011.111.111.010.7M10 x 1.5M10 x 1.5M10 x 1.5Packweight2.25 Kg3.82 Kg3.80 Kg1.99 Kg0.90 Kg0.70 Kg1.30 Kg0.26 KgPart number Supersedes Description Pack Dimensions (mm) Pipe sizeMCG3210MCG3212MCG3216MCG3218MCG3220MCG3224MCG3232MCG326MCG328MCG3214MCG3226MC.G.32.10MC.G.32.12MC.G.32.16MC.G.32.18MC.G.32.20MC.G.32.24MC.G.32.32MC.G.32.6MC.G.32.8MC.G.32.14MC.G.32.26Split bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushquantity1010101010101010101010A59.059.059.059.059.059.059.059.059.059.059.0B44.544.544.544.544.544.544.544.544.544.544.5(mm)15-1618-202528-3032-3435-38501012-142242OD5/83/411 1/41 1/423/81/27/8Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Packweight1.10 Kg1.10 Kg1.00 Kg1.00 Kg0.80 Kg0.80 Kg0.40 Kg1.30 Kg1.20 Kg1.00 Kg0.60 KgHow to ‘build’ Multiclamp1 2 34 5 67 8 9332Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Inline Check ValvesReservoir EquipmentSpecificationConstruction:Steel UNI 5105.Ball and spring:Chrome finished steel.Retainer:Nylon.Flow rates:From 20 l/min to 150 l/min.Max. working pressure:350 bar.Valve crack pressures:0.35 and 4.5 bar.Max. operating temp:120°C.Circuit symbolInstallation DetailsAB A/F HEXThreadTechnical DataOrdering InformationΔp (bar)Pressure Drop Flow CurvesFlow (US GPM)0 5 11 16 21 26 31 37 42 47 53 584.05823023.53.02.5230423012305230343.52.0291.51.014.50.500 20 40 60 80 100 120 140 160 180 2000220Flow (l/min)Δp (PSID)Standard products tableCrackingFlow pressure Thread A B WeightPart number l/min bar G mm mm Kg23012302230323042305231123122313231423152030501001502030501001500.350.350.350.350.354.504.504.504.504.501/43/81/23/411/43/81/23/415466778810854657788108192430364619243036460.090.170.320.480.990.090.170.320.480.99333Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Single Station Gauge Isolator ValvesReservoir EquipmentSpecificationConstruction:Single Station: Cast iron and steel. Knurledplastic knob with ‘Twist to lock’ or ‘push toread’ type.Max. working pressure:350 bar.Port size:Single Station: G 1 /4.Weight:Single Station: 0.90 Kg.Single Station Installation Details80.027.0M30 x 1.5HEX nut 38.0 A/F13.0G91.090.057.0G 1 /4 TYP3 positions21.036.029.0 27.7DR PCircuit symbol20.0 SQ28.054.026.0Operation DetailsSingle StationOrdering InformationStandard products tablePart numberGI1486GI1414DescriptionSingle station gauge isolator “twist to lock” typeSingle station gauge isolator “push to read” typeWeight0.90 Kg0.90 Kg334Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
63mm Dia. Pressure GaugesReservoir EquipmentSpecificationMounting Stem Detail2523152Ø5Ø9.5Snubber fittedG 1 /4 ( 1 /4” BSP)14 A/F HEXInstallation DetailsBottom ConnectionhD1GSWabeØD2SymbolConstruction:Case: Natural finish stainlesssteel.Window: Non-splintering clearacrylic glass.Movement: Cu alloy.Dial: White plastic, withpointer stop pin.Pointer: Black plastic.Liquid filling:Glycerine 99.7%.Working pressure:Max 75% of the full scale value.Note: It is recommended that allglycerine gauges should be mountedin the vertical position with gaugecase relief valve uppermost. Pressurerange up to 1000 bar available.Panel Mounting (Centre Back)Ordering InformationBottom ConnectionPart numberPGB0631010PGB0631016PGB0631025PGB0631040PGB0631060PGB0631100PGB0631160PGB0631250PGB0631400PGB0631600PGB0631004Panel MountingPart numberPGC0631010PGC0631016PGC0631025PGC0631040PGC0631060PGC0631100PGC0631160PGC0631250PGC0631400PGC0631004PGC0631600Process temperature range:0°C to 60°C maximum.Accuracy:1.6% FSD.Wetted parts connector:Copper alloy.Bourdon tube:< 60 bar = Cu alloy, C-type,soft soldered.> 60 bar = Cu alloy, helical type,soft soldered.IP Class:IP65.SupersedesPGB.0631.010PGB.0631.016PGB.0631.025PGB.0631.040PGB.0631.060PGB.0631.100PGB.0631.160PGB.0631.250PGB.0631.400PGB.0631.600PGB.0631.004SupersedesPGC.0631.010PGC.0631.016PGC.0631.025PGC.0631.040PGC.0631.060PGC.0631.100PGC.0631.160PGC.0631.250PGC.0631.400PGC.0631.004PGC.0631.600Pressure range0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-600 bar0-4 barPressure range0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-4 bar0-600 barConnector typeG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomG 1 /4 BottomConnector typeG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelG 1 /4 PanelDimensions (mm)Bottom Connectiona b D1 D2 e G h SW Weight±0.5 ±1 Kg13 32 68 62 6.5 G 1 /4 54 14 0.21Dimensions (mm)Panel Mounting (Lower Back)b b2 D1 D2 e G SW Weight±0.5 ±1 Kg32 56 68 62 6.5 G 1 /4 14 0.21Note 1: Panel cut-out 64.5 ±0.5Note 2: 13mm on the outside radius required to allow for fixing clamp.Panel Mounted (3-hole flange)ØD2Note 1: Gauge dimensions as forØD1panel mounting option abovewith flange as shown below.Note 2: Panel cut-out for 3-holemounting 67±0.3.Dimensions (mm)120°120°ØD3D1 D2 D375 85 3.6Panel Mounted (3-hole flange)Part numberPGF0631060PGF0631100PGF0631160PGF0631250PGF0631400PGF0631004PGF0631010PGF0631016PGF0631025PGF0631040PGF0631600SupersedesPGF.0631.060PGF.0631.100PGF.0631.160PGF.0631.250PGF.0631.400PGF.0631.004PGF.0631.010PGF.0631.016PGF.0631.025PGF.0631.040PGF.0631.600Pressure range0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-4 bar0-10 bar0-16 bar0-25 bar0-40 bar0-600 barNote 1: Part numbers featured with bold highlighted codes will ensurea ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you tocontact Parker Filtration for availability.*Note 3: Any subsequent changes to gauge accuracy will be notified.Connector typeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel FlangeG 1 /4 Panel Flange335Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
100mm Dia. Pressure GaugesReservoir EquipmentSpecificationMounting Stem Detail4339255Ø6Ø17.5Snubber fittedG 1 /2 ( 1 /2” BSP)22 A/F HEXInstallation DetailsBottom ConnectionhSymbolConstruction:Case: BS 304 S15 stainlesssteel.Window: Acrylic.Movement: Brass.Dial: White aluminium.Pointer: Black aluminium.Liquid filling:Glycerine 98%.Working pressure:Full scale value.Note: It is recommended that allglycerine gauges should be mountedin the vertical position with gaugecase relief valve uppermost.GDimensions (mm)Bottom Connectiona b D1 D2 e G h SW Weight±0.5 ±1 Kg15.5 48 107 100 8 G 1 /2 87 22 0.80Dimensions (mm)Panel Mounting (Lower Back)b b2 D1 D2 e G SW Weight±0.5 ±1 Kg48 81.5 107 100 8 G 1 /2 22 0.80Note 1: Panel cut-out 102 ±1.0Note 2: 13mm on the outside radius required to allow for fixing clamp.Panel Mounted (3-hole flange)ØD2Note 1: Gauge dimensions as forØD1panel mounting option abovewith flange as shown below.Note 2: Panel cut-out for 3-holemounting 104±0.5.Dimensions (mm)120°D1SW120°ØD3abeØD2Panel Mounting (Lower Back)109±145°D1GD1 D2 D3116 132 4.8b2SWbeØD2Ordering InformationBottom ConnectionPart numberPGB1001250PGB1001400PGB1001010PGB1001016PGB1001025PGB1001040PGB1001060PGB1001100PGB1001160PGB1001600PGB10011000Panel MountingPart numberPGE1001010PGE1001016PGE1001025PGE1001040PGE1001060PGE1001100PGE1001160PGE1001250PGE1001400PGE1001600PGE10011000Panel Mounted (3-hole flange)Part numberPG.1001250PGF1001400PGF1001010PGF1001016PGF1001025PGF1001040PGF1001060PGF1001100PGF1001160PGF1001600PGF10011000Process temperature range:–20°C to +60°C maximum.Accuracy:1.0% FSD.Wetted parts connector:Copper alloy.Bourdon tube:< 100 bar = Cu alloy, c-type,soft soldered.> 100 bar = stainless steel 1.4571,helical type, brazed.IP Class:IP65.SupersedesPGB.1001.250PGB.1001.400PGB.1001.010PGB.1001.016PGB.1001.025PGB.1001.040PGB.1001.060PGB.1001.100PGB.1001.160PGB.1001.600PGB.1001.1000SupersedesPGE.1001.010PGE.1001.016PGE.1001.025PGE.1001.040PGE.1001.060PGE.1001.100PGE.1001.160PGE.1001.250PGE.1001.400PGE.1001.600PGE.1001.1000SupersedesPGF.1001.250PGF.1001.400PGF.1001.010PGF.1001.016PGF.1001.025PGF.1001.040PGF.1001.060PGF.1001.100PGF.1001.160PGF.1001.600PGF.1001.1000Pressure range0-250 bar0-400 bar0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-600 bar0-1000 barPressure range0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-600 bar0-1000 barPressure range0-250 bar0-400 bar0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-600 bar0-1000 barNote 1: Part numbers featured with bold highlighted codes will ensurea ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you tocontact Parker Filtration for availability.*Note 3: Any subsequent changes to gauge accuracy will be notified.Connector typeG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomG 1 /2 BottomConnector typeG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelG 1 /2 PanelConnector typeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel FlangeG 1 /2 Panel Flange336Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountLaserCM20Fluid Condition MonitoringPortable Particle CounterA 2-minutecontamination testprocedure:A portable particle counterdesigned to be used in thefieldicountLCM20 is a proven answerto fluid system contaminationmonitoring offering a 2-minute testprocedure. Multi-standard ISO andN<strong>AS</strong> cleanliness reporting, data entry,data graphing and integral printingare all standard on this world provencontamination monitor.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• icountLCM20 is a proven answer to fluid systemcontamination monitoring.• 2-minute test procedure.• Multi-standard ISO, N<strong>AS</strong> and <strong>AS</strong>4059 cleanliness reporting.• Data entry, data graphing and integral printer.• 420 bar rated maximum pressure.• Supported by the offline UBS and online SPS accessories.www.parkerhfde.com337Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountLaserCM20Portable Particle CounterFeatures &BenefitsTest time:Particle counts:2minutesMTD 4+, 6+, 14+, 21+, 38+ and70+ microns(c)ACFTD 2+, 5+, 15+, 25+, 50+and 100+ micronsInternational codes: ISO 7-22, N<strong>AS</strong> 0-12Data retrieval:Max. working pressure:Max. flow rate:Working conditions:Computer compatibility:Memory access gives test searchfacility420 bar400 I/min when used with system20 Sensors. Higher with singlepoint sampler (see page 357)LaserCM will operate with thesystem working normallyInterface via RS232 connection@9600 baud rate.Special ‘diagnostics’ are incorporated into theicountLaserCM microprocessor control to ensureeffective testing.Routine contamination monitoring of oil systems withicountLaserCM saves time and saves money.Contamination monitoring is now possible duringapplicaton operation -icountLaserCM saves onproduction downtime.Data entry allows individual equipment test log detailsto be recorded.Data retrieval of test results from memory via handset display.Automatic test cycle logging of up to 300 tests canbe selected via hand set display.Totally portable, can be used as easily in the field asin the laboratory.Automatic calibration reminder.Instant, accurate results achieved with a2minutetest cycle.Data entry allows individual equipment footprint record.Data graphing selectable via the integral printer.Auto 300-test cycle logging via LCD handset input.RS232 to USB computer interface.Limit level output to control peripheral equipment suchas off-line filtration via internal relay limit switches.Auto-testing allows for the conducting of automaticsequencing tests on flushing systems for example.Optional bar code swipe wand to allow handsetdata loading.Worldwide service and technical support.Re-calibration -Annual certification by an approvedParker Service Centre.Typical ApplicationsConstruction machineryIndustrial plant<strong>Hydraulic</strong> equipment &systemmanufacturersResearch &testing institutesOffshore &power generationMarineMilitary equipment applicationsParker LaserCM Portable ParticleCounter.With 20 years experience in manufacturingthe world’s best selling ‘white light’ portableparticle counter – CM20, the progression tothe icountLaserCM with its opto-mechanical,continuous wave single point source laser(SPSL) is both anatural and customer drivendevelopment.338Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationAutomatic Particle Counters (APC’s), have been widelyused for many years in condition monitoring of hydraulicfluids. However, it is only recently that APC’s have becomeflexible enough to enable the instruments to be taken out ofthe laboratory and used on-line in order to obtain the mostcredible form of results.Unusually, the move from fixed laboratory use, to portable fielduse has not been at the expense of accuracy or user flexibility,but has actually enabled the instruments to be used over awider range of applications and situations.The most common monitoring technique used in APC’s is thatof light obscuration or light blockage. Here, a focused lightsource is projected through a moving column of oil, (in whichthe contaminants being measured are contained), causing animage of the contaminant to be projected on to a photo diodecell, (changing light intensity to an electrical output).The electrical output of the photo diode cell will vary inaccordance with the size of the particles contained in thecolumn of oil; the larger the particle, the bigger the change inthe photo diode electrical output.On-line APC’s must be able to test the oil sample at whatevercleanliness it is delivered to the machine. Parker therefore hadto develop technology to ensure the on-line APC was able totest a sample without the conventional laboratory techniquewhich requires dilution - a practice that would have beensimply impossible with a portable unit.By careful design and window sizing, gravimetric levels ashigh as 310mg of dirt per litre, (equivalent to up to 4 millionparticles >6 micron per 100 ml), can be achieved withoutmaking the instrument susceptible to counter saturation.These high saturation point on-line APC’s, whilst losing noneof the accuracy of their laboratory counterparts, enableparticle counting to be carried out quickly and accurately.Laser Optical SensingCore technology that proves itself in icountLaserCMThe icountLaserCM portable particle counter featuresmicroprocessor controlled optical scanning for accuratecontaminant measurement with a calibration range from ISO 7to ISO 22 with no counter saturation.How does icountLaserCM work?– The particles are measured by a photo diode that convertslight intensity to a voltage output which is recorded againsttime.– As the particle moves across the window the amount oflight lost is proportional to the size of the particle. Thisreduction in voltage is measured and recorded.– This “voltage” lost relates directly to the area of the particlemeasured, is changed into a “positive” voltage and then inturn changed into a capacitance value.– This value is counted and stored in the icountLaserCMcomputer in one of 6 channels according to particle size.– Readouts are displayed on the hand-held LCD in theaccepted ISO and N<strong>AS</strong> standards ready for hard copyprinting or RS232 computer download.– The on-board computer allows storage of up to 300test results.A focused light source isprojected through a movingcolumn of oil.339Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountLaserCM20Portable Particle CounterSpecificationDescriptionLaserCM LaserCM(LCM20 20 22) (LCM20 20 62)ABS structural foam and injection moulded caseABS handheld displayMechanical composition – Brass,plated steel, stainless steel and aluminiumFluorocarbon sealsPerfluoroelastomer sealsNylon hoses (kevlar braided microbore)Stainless steel armoured hose ends1.2m fluid connection hoseRechargeable battery pack12Vdc power supplyFast blow fuseUnique optical scanning systemBonded glass optical window enclosed in SS plateMicron channels analysis (Six)Analysis range ISO 7 to 22 incl. (N<strong>AS</strong> 0 to 12)32 character dot matrix LCD. Alpha numeric keypadData retrievalCalibration to ISO standards*Viscosity range 2 to 100 cSt. 500 cSt.with SPSOperating temp.+5 to +80°CAmbient temp.+5 to +40°C2 minute test completion timeMemory store – 300 test memoryBattery operated 6 x 1.5 D cellsPhosphate Ester group compatibilityMineral oil & petroleum based fluid compatibilityUp to 420 bar (6000 psi)Integral 16 column printerRS232 to USB computer interfaceAstra board case weight – (Kg)Unit weight – (Kg)ParSmart software and cable link packWeather protector coverCE certifiedAuto logging28 126 32249Commissioning KitPower supplyLimit socket, fuse& jack plug258240ScrewdriverParSmart &cable assy*Note: In compliance with international standards, all Parker portable particle counters canmeet the ISO Medium test dust standards. The icountLaserCM’s, in addition to the completerange of Condition Monitoring products, are capable of achieving certification to ISO4406:1999 and with traceability to ISO 11171 for SRM 2806, via ISO 11943.Re-chargeablebattery packInstructionmanual & barcode softwarePower lead,printer ribbon,bar code pen &weather coverBatteries &printer reel340Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
OperationSwitch OnStart TestOperating the Parker icountLaserCM is as simple as pressingthe start button and turning the dial. The test procedure isautomatic and in the case of the icountLaserCM takes nomore than 2 minutes to complete.icountLCM20 makes the difference in industryFully accredited to BS EN 60825:1992 and IEC 60825-1 (safetyof laser products) Standards, accredited to USA Standardsand achieving full ISO certification. icountLaserCM offers usersadvanced laser technology, a fast, dynamic and on-line 2minute system test cycle. An icountLaserCM Aggressive Fluidsmodel is also available, suitable for monitoring corrosive fluidssuch as phosphate ester based lubricants used in commercialaviation.MTD calibrationicountLaserCM MTD Calibration variants are certified via aprimary ISO 11171 calibrated automatic particle counter. AllMTD Laser CM20’s achieve ISO 4406:1999 criteria, via ISO11943.icountLCM20Using SPSUnderstanding MTDACFTD (Air Cleaner Fine Test Dust) was formatted in the1960’s, but is no longer being produced. The obsolescence ofthis dust has led to the adoption of a new dust MTD.MTD (Medium Test Dust) having a particle size distributionclose to ACFTD was selected as a replacement. However,MTD produced results somewhat different to ACFTD, so theNIST (National Institute of Standards & Technology) undertooka project to certify the particle size distribution of ISO MTD.The result was particle sizes below 10μm were greater thanpreviously measured.Particles sizes reported based on NIST would be representedas μm (c), with “c” referring to “certified”. Therefore theicountLCM20 reported sizes are as follows:ACFTD2μ5μ15μ25μ50μ100μMTD4μ (c)6μ (c)14μ (c)21μ (c)38μ (c)70μ (c)MTD offers true traceability, improved particle size accuracyand better batch to batch reproduction.341Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountLaserCM20Portable Particle CounterWhy On-Site Fluid Contamination Monitoring?Certification of fluid cleanliness levels.Early warning instrument to help preventcatastrophic failure in critical systems.Immediate results with laboratory accuracy.To comply with customer cleanlinessrequirements and specifications.New equipment warranty compliance.New oil cleanliness testing.Data Download ManagementDedicated software, provides the link betweenan icountLaserCM20 and the H2Oil - Water in Oilmonitor and your computer management system.16-column printer for hard copy data. A feature of theicountLaserCM is the on-board printout data graphing optiondeveloped to support predictive maintenance procedures.icountLaserCM TestON LINE TESTTEST NUMBER 022icountLaserCM TestON LINE TESTTEST NUMBER 022D M YDate 04-03-10Time 15-52ISO: 20/15/09Count / 100ml>4μ (c) 820721>6μ (c) 31564>14μ (c) 314>21μ (c) 64>38μ (c) 14>70μ (c) 0NOTESD M YDate 04-03-10Time 15-52N<strong>AS</strong> CL<strong>AS</strong>S: 7Count / 100ml4/6μ (c) 7891576/14μ (c) 31250N<strong>AS</strong> CL<strong>AS</strong>S 714/21μ (c) 250N<strong>AS</strong> CL<strong>AS</strong>S 321/38μ (c) 50N<strong>AS</strong> CL<strong>AS</strong>S 338/70μ (c) 14N<strong>AS</strong> CL<strong>AS</strong>S 4>70μ (c) 0N<strong>AS</strong> CL<strong>AS</strong>S 0NOTESISO 4406 - 1999 Correlation to N<strong>AS</strong> 1638342Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Introducing the new icountLCM ‘Classic’There is a new addition to the proven range – the icountLCM‘Classic’. Only available from Parker, the ‘Classic’ retainsall the technology that made the icountLaserCM one of themost accurate, reliable and popular portable particle countersavailable.Classic icountLCM20Our design engineers have re-configured the icountLaserCMspecification in a way that has reduced our manufacturingcosts. These savings have been passed onto icountLCM‘Classic’ customers.How have we done this?Parker listened to our existing customers and then to the engineersand maintenance operatives to find out the features thatmake the icountLaserCM a unique predictive maintenanceinstrument.Empty battery packCalibrationcertificateThen, we removed peripheral items such as the aluminiumcase and all the accessories, so a customer receives theicountLCM, with a CD user guide, professionally and securelyboxed. One thing that has not altered is the icountLCMaccuracy and icountLCM reliability. Our in-house softwareengineers have re-configured the EPROM, removing Dataprogramming, User ID, Automatic Testing, Data retrieval,Alarm level settings, the barcode pen and Graph printingfunctions to reduce costs still further without in any wayreducing the efficiency of the icountLCM. The icountLCM‘Classic’ remains an instrument to be proud of.CD user guideCarton box suppliedto house kitOrdering Information (icountLaserCM and ‘Classic’ icountLaserCM)Standard products tablePart numberSupersedesDescriptionLCM202022LCM202026ACC6NE015ACC6NE014ACC6NE013ACC6ND002ACC6ND000LCM20.2022LCM20.2026B84702P.843702B84609P849603B84703icountLCM20 (MTD calibrated)icountLCM20 ‘classic’ (MTD calibrated)Printer roll x 5Printer ribbonRe-chargeable battery packWeather protector coverUSB to RS232 Download CableNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Product configuratorModelFluid typeOptionsLCM202026<strong>Hydraulic</strong> mineralSkydrol123456icountLCM20 (ACFTD calibrated)icountLCM20 (MTD calibrated)icountLCM20 (ACFTD calibrated) + bar code penicountLCM20 (MTD calibrated) + bar code penicountLCM20 ‘classic’ (ACFTD calibrated)icountLCM20 ‘classic’ (MTD calibrated)Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.343Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Universal Bottle SamplerSimple and efficient offline oil samplingClean andcontamination freesamplingIdeal for batch oil samplingand laboratory testingThe UBS provides the dynamiclink to portable particle and watercounters. The UBS off-line samplerhas microprocessor technologyto recognise and adjust to theconnecting monitor including theicountLCM20 and H 2 Oil water in oilmonitor.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:Simple operationEfficient testing procedureClean and contamination free samplingAvailable for both mineral based and aggressive fluidsFurther advances the LCM20’s flexibility into laboratory bottlesampling environmentsCan accept various different sized bottlesMinimal working partsInternal auto setting fuse for overload protectionSimple maintenance procedures344Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationDescriptionViscosity range 2 to 250 cStOperating temp +5 to +80°CTest time 2m15s / 4m15s (Flush 2m)12 Vdc power supplyExtruded aluminium constructionUnit weight - (Kg)Mineral oil and petroleum based compatibilityPhosphate Ester group compatibilityCE certifiedMilitary approvedManual operationBottle packDe-gassing chamberManualSample tube packInterface cable to LCM20, H2Oil etc.Installation Details15131914717911120 CTRS80 CTRS165100 CTRS345Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Universal Bottle SamplerSimple and efficient offline oil samplingSystem Flow RateSamples are best taken from a point in the systemwhere the flow is TURBULENT (Reynolds No. greaterthan 4000). The turbulent flow creates a mixing action.Where flow is streamline or LAMINAR, larger particulatemay tend to settle toward the lower pipe surface andnot be sampled.System Condition ChangesChanges in the system operating condition, flow,temperature, pressure or vibration, can result inpreviously sedimented contaminant being retrained intothe flowing oil. It is also possible that these changesmay cause partially contaminated filter elements to shedparticulate into the system. Samples should, therefore,be extracted when the system is in a steady statecondition and the result less likely to be distorted bycontaminant peaks.There are a number of proprietary sampling valvesavailable which adhere to good theoretical principles.However, they do tend to generate a level of precisionand cost which is unnecessary for trend monitoring.Sampling points should enable extraction of a samplewithout changing the system’s condition. Fine controlneedle valves are not desirable, as they have atendency to silt up under some operating conditions,causing the distribution of contaminants in the fluid tobe changed. The sampling port should be protectedto maintain cleanliness and thoroughly flushed beforecollecting the sample for analysis. Allow sufficientairspace in the bottle to enable 80% fill.Bottle CleanlinessIt is preferable that bottles have sealing screw caps andboth parts are cleaned to a suitable level in accordancewith ISO3722.The bottle should not contain more than one tenth thenumber of particles per 100ml than are expected to bemonitored. Standard Parker bottles ae supplied cleanto ISO13/11 (N<strong>AS</strong> Class 4) and should not be used toaccurately count oils cleaner than ISO 15/12 (N<strong>AS</strong> Class6) although they may be used for “trend mlonitoring” atlower levels.The bottle should remain capped until time of samplefilling and re-capped immediately afterwards.Sample MixingSedimentation of contaminant in a sample will occur,the rate of which is dependent upon both fluid andparticle characteristics.Samples should be analysed, without delay, onceagitated and de-glassed.ACC6NW001 x 50 = ACC6NW002ACC6NK001346Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationStandard products tablePart numberUBS9002UBS9003UBS9004UBS9005DescriptionUniversal bottle sampler (includes aluminium case and accessories)Universal bottle samplerAggressive universal bottle samplerAggressive universal bottle sampler (Includes aluminium case and accessories)AccessoriesPart numberACC6NK001ACC6NW001ACC6NW002ACC6NK002ACC6NK003ACC6NK004ACC6NK005SupersedesB89907B89911B89910S840054S890005B89603B89902DescriptionSample bottle pair no capSample bottle pair with extraction hoseSample bottle pack (50 x ACC6NW001)UBS Power supplyUBS De-gassing chamber and pumpUBS De-gassing chamber onlyCable and adaptorNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Typical ApplicationsBatch samplingAircraft rig certificationOil researchLaboratory testingTransfer line monitoringSimple To Use UBSThe oil sample is drawn into the UBS Off-line where itis secured, free from further contamination, in a bottletogether with a clean waste bottle by a peristaltic, selfprimingpump. Simple operation and efficient testing areassured once the UBS Off-line is connected to any ofthe CM monitors, and powered up using it’s own powersource. The oil sample requires agitation and de-gassingbefore carrying out the contamination test. A de-gassing kitoption is available and consists of a vacuum chamber andpump. (Standard with UBS9002)347Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Notes348Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountBSBottle SamplerIn the lab or in thefield monitoringParker Filtration’s icountBS is aunique and complete solutionproviding customers withlaboratory fluid bottle samplingusing proven on-board, laserbased technology. icountBS isa next generation product fromParker’s fluid particle analysisand monitoring programme andprovides an effective alternative toexternal laboratory services.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• Quick sample bottle analysiswith variable test time optionsfrom 15 seconds and volumecapacities from 10ml.• Repeatable and re-producibleresult performance toISO4406:1999 and N<strong>AS</strong>1638particle count distributions.• On-board compressor and‘shop’ air capability.• Environmentally controlledfront-loading bottle chamber.• Design concept allowingfor portability. DC andrechargeable battery packpower option built in.• 6 fixed channel size analysis.• Fluid resistant touch typescreen panel.• On-board thermal printer.• 500 test memory (fullydownloadable).349Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
The complete solution - industrialdesign combined with stateof the art technologyThe icountBS - Bottle Samplerfrom Parker with its innovativeindustrial design has beendeveloped for customerslooking for state ofthe art technology, attentionto detail and the compactnessof a permanent laboratoryparticle analysis model.Combine this with on-board, laserbased, leading edge technologyto bring to all industries a trulyrevolutionary Particle Counter.The icountBS is a product fromthe next generation of Parker’sfluid particle analysis andmonitoring innovations.The IBS features an easy to useinteractive touch screen,environmentally controlledpressurized bottle chamber for airbubble suppression via aninternal compressor pump, withautomated door lockingmechanism, sample tubecleaning sleeve minimizingcontamination cross over, andan internal thermal printer.The icountBS benefits fromParkers knowledge andexperience of providing bottleanalysis equipment to the marketover the last 20 years.This experience comes fromselling market leading innovativesolutions and by having front linecondition monitoring products forall sectors of fluid analysisopportunities. The unit was atevery stage developed with thecustomers voice in mind.350Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountBS - BottleSampler Features& Benefits• Quick sample bottle analysiswith variable test time optionsfrom 15 seconds and volumecapacities from 10ml.• Repeatable and re-producibleresult performance toISO4406:1999 and N<strong>AS</strong>1638particle count distributions. Forother calibration standards consultParker CMC.• On-board compressor and ‘shop’air capability.• Design concept allowing forportability. DC and rechargeablebattery pack power options built in.• Cost-effective and economicalalternative solution to externallaboratory services.• 6 fixed channel size analysis.• Fluid resistant touch typescreen panel.• Sample tube self cleaning sleeveminimizing contaminationcross over.• Internal thermal printer.351Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Analysing the test resultsI have my results what do I donext?Solid contaminants in fluid powersystems vary in size, shape, formand quantity. The most harmfulcontaminants are normally between6 microns and 14 microns. The ISOcode is the preferred method ofreporting quantity of contaminants.The ISO code number correspondsto contamination levels relatingto three sizes.The first scale number representsthe number of particles larger than4μm(c) per 100 milliliters of fluid,the second number for particleslarger than 6 μm(c) per 100 millilitersof fluid and the third number forparticles larger than 14 μm(c) per100 milliliters of fluid.For example: An ISO code 20/18/14indicates that there are between500,000 and 1,000,000 particleslarger than 4μm(c), and between130,000 and 250,000 particles largerthan 6 μm(c), and between 4,000and 8,000 particles larger than14μm(c).icountBS reporting and dataIn addition to the ‘raw data’ printoutof ISO compliant data from theicountBS’s on-board printer, icountMini-lab offers the user theadvantage of a 2-page reportproviding hard copy data on ISO/N<strong>AS</strong> individual counts and averagecontamination results.FACT *Did you know the best human eye can only seeparticles above 40μ(c)?Component Cleanliness GuideSuggested acceptable contamination levels for typical hydraulic systemsTargetcontaminationclass toISO 4406: 1999Suggested maximumparticle levelSensitivity Type of system Typical components4 μm(c) 6 μm(c) 14 μm(c) 4 μm(c) 6 μm(c) 14 μm(c)15 13 9 16,000 4,000 250SupercriticalSilt-sensitive controlsystems with very highreliability. Laboratoryor aerospaceHigh performanceservo valves17 15 11 64,000 16,000 1,000 CriticalHigh performance servoand high pressure long lifesystems, e.g. aircraft,machine tools etc.Industrial servo valves18 16 13 130,000 32,000 4,000VeryimportantHigh quality reliablesystems. General machinerequirementsPiston pumps, proportionalvalves, compensated flowcontrols20 18 14 500,000 130,000 8,000 ImportantGeneral machinery andmobile systems. Mediumpressure, medium capacityVane pumps, spool valves21 19 15 1,000,000 250,000 16,000 AverageLow pressure heavyindustrial systems,or applications where longlife is not criticalGear pumps, manual andpoppet valves, cylinders23 21 17 4,000,000 1,000,000 64,000MainprotectionLow pressure systemswith large clearancesRam pumpsNotes:Tables have been generated by organisations in various industries.Some of the tables are defined in cumulative counts, e.g. ‘>6μm’ and others are represented as differential counts e.g. ‘6-14μm’.All μm(c) refer to MTD distributions. All μm references will refer to ACFTD distributions.All standards are in counts per 100ml and provide easy methods for converting particle counts into limits that are simpleto interpret. By noting the requirements of the standard, particle counts can be accurately converted to contamination levels.352Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountBS Product SpecificationPrinciple of OperationCalibration DustLaser based light obscurationMTD or ACFTDDimensions H=530 x W=190 (210 Door clearance) x D=410 (mm) H=20.9in x W=7.5in x 16.9inWeightMechanical CompositionPlastics CompositionEnvironmental Operating Temperature(Fully Tested)Operating % RH rangeStorage TemperatureStorage RH range18KgStainless steel 316, plated mild steel and aluminiumPrecision polyurethane RIM mouldings and ABS plastic+5°C to + 60°C (41 o F to 140°F)20 – 85% (Tested at 30 o C, no condensation)-40°C to + 90°C (–40°F to 194°F)10 – 90% (Tested at 30 o C (86°F), no condensation)Channel Sizes MTD - ≥4μ(c),≥6μ(c),≥14μ(c),≥21μ(c),≥38μ(c), ≥70μ(c) ACFTD - ≥2μ,≥5μ,≥15μ,≥25μ,≥50μ,≥100μAnalysis Range ISO 7 to 21, N<strong>AS</strong> 0 to 12Contamination StandardsCalibration StandardMTD - ISO 4406:1999 & N<strong>AS</strong> 1638 ACFTD - ISO 4406:1987, ISO 4406:1991 & N<strong>AS</strong> 1638For further contamination standards consult Parker CMCISO MTD and ACFTD calibration to traceable ISO Standards. (Contact Parker CMC for further details).Fluid Management Maximum single sample = 100ml Minimum single sample = 10mlPossible Test ConfigurationsPre-Test Flush VolumeViscosity RangeFluid CompatibilitySample Bottle SizeMemory StorageOutput DisplayOutput Display ResolutionDisplay Active AreaData InputPrinterPrinter PaperTest CertificationPower SupplyBattery PowerBattery Stand-By TimeBattery FuseAir pressure SourceUser selectable from single test up to 5 tests per run (eg.1x100ml up to 5 x50ml per run)Minimum = 10ml, Maximum = 100ml1-400 cStMineral oils, petroleum and hydrocarbon based fluids (consult manufacturer)and some esters (consult manufacturer).Non specific. Max size = Ø75 (2.95in) x (H) 150 mm (5.9in). Max Volume = 250ml500 Tests (capacity warning after 450 tests)Backlight 256 Colour STN Transmissive320 x 3(R.G.B)(H) x 240(W) dots115(H) x 86(W) mm 4.5in (H) x 3.4 in (W)Via icon driven oil resistive touch screenThermal dot-line printingØ50mm – (57mm x 25mm) Ø 1.97in – (2.24in x 0.98in)Fully traceable Calibration & Certificate of Conformity12Vdc@ 6.60Amps, 80 watts max.2 Hours (recommended to be fully charged every 3 months)1 month (then 1 hour of operation)6.3 Amps (anti-surge)3.5 bar (51 PSI) internal Mini-compressor or 7 Bar (101 PSI) shop air353Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountBS – Bottle SamplerOrdering InformationKey Fluid Type Calibration Future OptionFutureOptionFutureOptionFutureOptionFutureOptionPower SupplyRegionIBS 1 Mineral 1 ACFTD 0 Lab Unit 0 0 1 0 0 UK2 MTD 1 Mini-lab Package 1 USA2 <strong>Europe</strong>Key Fluid Type Calibration Future OptionFutureOptionFutureOptionFutureOptionFutureOptionPower SupplyRegionIBS 1 2 0 0 0 1 0 0IBS 1 2 0 0 0 1 0 1IBS 1 2 0 0 0 1 0 2Part NumberAccessoriesACC6NW001 2 x 250ml sample bottle packACC6NW002 100 x 250ml sample bottles (50 packs of 2)ACC6NW003 Vapour / Waste bottleACC6NW005 Printer paper reel (x1)ACC6NW006 UK power supplyACC6NW007 USA power supplyACC6NW008 <strong>Europe</strong>an power supplyACC6NW009 1 meter waste tube (Clear)ACC6NW010 1 meter vapour hose (Blue)ACC6NW011 USB memory stickACC6NW012 IBS CD manualACC6NW020 IBS transit caseSERMISCO49 Verification fluidNew icountABScoming soonA new aviation fuel bottle samplerbased on the icountBS with a methodof operation which complies withIP564 methodology will be availablesoon.Consult Parker for more details.354Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Introducing the icount‘Mini-lab’ – The effective wayof utilising your icountBSHow clean is your hydraulic system?Contamination Control is only an oil sampleaway with our easy, 3-Step fluid analysis service.Step 1Obtain your sampleof hydraulic oil.Step 2Take the 2 minute off-lineoil sample test.Step 3View your results and runa report immediately.Kit comprises: icountBS. Flat-pack trolley. 30 sample bottles. Optional Laptop/software/printer and cables355Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
CMC Service CentresGlobal Support for CMC productsImproving aftermarket support for condition monitoring products.Parker’s fluid Condition Monitoring Service Centres canbe found currently in 10 locations around the globe, onalmost every continent. Our experience and expertise influid condition monitoring and analysis ensure we areTHE authority within our industry.Each location offers first class aftermarket support forCondition Monitoring products, giving:• Direct Contact for End Users.• Quick and confident technical support to assist youin maintaining an efficient and trouble free monitoringprocess.• Faster turn around for annual calibration verification,resulting in the product not having to come back tothe country of manufacture.Parker also offers on the icountACM20 laboratoryunit:• A six monthly field use verification sample forconfident product performance.• An extended two year warranty, giving confidence inproduct readiness.Visit www.parkerhfde.com/condition/service/ to findyour nearest location and contact details.Parker returns policy andcalibration procedureEach product returned to anapproved Parker Service Centre willhave the following:• A visual inspection of all case components.If any components from the support case requirereplacing, please notify the Service Centre at the time ofreturn.Parker holds no responsibility for case contents and willonly replace parts if required or deemed necessary.• An external inspection of the complete assembly.The particle counter will be thoroughly checked for signsof damage or misuse and if necessary an estimate of thecost of repair will be provided.• Replacement of any defective or damaged parts.No corrective work will be carried out on the productreturned without the authorization from the end user.• Recalibration (with a Certificate valid for 12months).Each unit is calibrated to the relevant ISO standards.The recalibration procedure does not include thereplacement of any damaged components that havebeen deemed defective through negligence or misuse.• Full functionality test.This includes visual inspection of internal parts and theiroperation.356Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Single Point SamplerOnline SamplingLightweight andcompact connectionmineral based fluidsThe effective link to ensureaccurate contaminationmonitoringThe SPS (Single Point Sampler) is alightweight, compact and easy to useonline sampling unit that connectsan icountLCM20 or H 2 Oil to a singlepressure test point in a fluid system.Suitable for use with mineral andbiodegradable oils, petroleum basedand phosphate ester fluids, the SPSoffers fingertip operated control evenat high pressures - 420 bar (6000 PSI)rated maximum pressure.aggressive/phosphate Ester fluidsContact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Lightweight, compact and easy to use online sampling unit.• Connects an icountLCM20 or H 2 Oil to a single pressure testpoint in a fluid system.• Suitable for use with mineral and biodegradable oils,petroleum based and phosphate ester fluids.• 420 bar (6000 PSI) rated maximum pressurewww.parkerhfde.com357Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Single Point SamplerOnline SamplingFeatures & BenefitsThe Single Point Sampler provides a means toconnect an icountLCM20 or H2Oil to a singlepressure test point and balance the differentialpressure across the system, to provide acontrolled flow of oil into the icountLCM20 or H 2 Oiland away into a waste oil receptacle.Lightweight, compact and easy to use designFingertip operated control valve even at highpressures420 bar (6,000PSI) ratedFacilitates testing from large diameter pipeworkCapability to test up to 500cSt viscosity oils(pressure permitting)Pressure compensated flow control mechanismPossible to control the valve with the same levelof accuracy whether the device is operating athigh or low pressureCapable of allowing a flow rate in excess of10ml/min when operating at any viscosity withinthe product specificationSuitable for fluid temperatures from +5°C to +80°C(+41°F to +176°F)High quality polished finish. (stainless steel/aircraft grade aluminium)Capable of working with an icountLCM20 orH2Oil connected into a system via the standardone metre extension hose kitSuitable for use with mineral and biodegradableoils, petroleum based and phosphate ester fluidsPhosphate ester version utilises the 5 /8” BSFHSP style fittingDesigned so that it meets the lowest possiblelevel of magnetic permeabilitySupplied with accessories kitIt will maintain the set flow rate between upperand lower limits within a 100 bar inline pressurechangeClear product identification to ensure that it isconnected correctly. (i.e. downstream of theicountLCM20 or H2Oil)Connection Instructions(F)System(E) P1Prs.P2icountLCM20 or H 2 Oil(D)(A)(C)(B)SinglepointsamplerR1. Ensure valve is closed (A).2. Connect P2 on icountLCM20 or H 2 Oil (B) to P2 on Single Point Sampler (SPS) (C).3. Connect drain line on SPS (D).4. Connect P1 of icountLCM20 or H 2 Oil (E) to the system (F).5. The SPS is ready to operate.6. Open valve (A) slowly until the oil flows continuously from the drainline (D) into areservoir or recepticale (R).7. Switch on monitor and begin testing.icountLCM20 OnlyCarry out flow test as shown in the manual. If test is showing below Δt 3.6°C then carryout test as normal. If, however, test is above Δt 3.6°C then increase oil flow by turningvalve (A) anticlockwise and then carry out flow test. Do this until Δt is below 3.6°C andcarry out test as normal once achieved.WARNING! Ensure that SPS valve is closed and icountLCM20 or H 2 Oil isconnected to the SPS BEFORE connection to system.358Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationFluid compatibility:Mineral oil and petroleum based fluids (standard version).Aggressive fluid (dual seal version) for other fluids consultParker Hannifin.Seals:Fluorocarbon or Perfluoroelastomer.Maximum working pressure:420 bar (6000 psi).Weight:500 grams max. (Not including hoses).Packaging standard:Cardboard carton (military usage - plastic carry case).Unit size:45mm dia x 123mm long. (1.77in dia x 4.8in long).System connection:Standard - M16 (G 1 /4” BSP) with cap,Aggressive - 5 /8” BSF HSP.Operating temp range:+5°C to +80°C (+41°F to +176°F).Storage temperature range:-26°C to +80°C (-15°F to +176°F).Construction:Body:Finish:Aluminium BS 1470 – pressurised end stainless steel.Anodised blue (standard version) - Mineral Oil.Anodised red (dual seal version) - Aggressive Oil.123SWP 420 bar80.0P2Ø45.053Ordering InformationStandard products tablePart numberSupersedesDescriptionSPS2021SPS2061ACC6NW003ACC6NH001ACC6NH002ACC6NH003ACC6NH004SPS.2021SPS.2061B84784B84224B84225B84788B84787Single point sampler (Mineral Oil fluids)Single point sampler (Aggressive/phosphate ester fluidsWaste bottle (Universal)Extension hose/coupling (Mineral fluids)Extension hose/coupling (Aggressive/phosphate ester fluids)Waste hose (Mineral Oil)Waste hose (Aggressive/phosphate ester fluids)Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.359Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
System20Inline Sensors & MonitorsA proven method ofaccurate conditionmonitoring of asystemEffective inline sensors andmonitors for fluid conditionmonitoringInline System20 sensors andhand-held monitors designed togive accurate and instant fluidsystem readings of flow, pressureand temperature. 3 sizes of inlineSystem20 sensor for pressures upto 420 bar, an analogue monitorthat utilizes 3 day-glow gauges withprotective cover. EM20 electronicmonitor with full digital display and300 test memory.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• 2 types of System20 sensor are available.STI=industrial with reverse flow capability.STS=Mobile without reverse flow capability.• 3 sizes of industrial inline System20 sensor for pressures upto 420 bar. 2 sizes of Mobile System20 sensor.• Analogue monitor utilizes 3 day-glow gauges with protectivecover.• EM20 electronic monitor with full digital display and 300 testmemory.• For use with all mineral oils, water and oil/water emulsions.360Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
System20Inline Sensors & MonitorsFeatures & BenefitsCovering a wide range of flow rates, fluid typesand applications, Parker’s System 20 sensors aredesigned to be used with System 20 electronic oranalogue monitors, icountLCM, icountPD and theH2Oil. Specially developed System20 sensors areavailable for use with aggressive fluids. (EPDM Seals)System20 monitors, combined with the inlinesensor, give the user accurate and instantreadings of flow, pressure and temperaturewithout the need for costly system downtime.For use with all mineral oils, water and water/oilemulsions.Analogue MonitorUtilises 3 Day-Glo dial gauges with a protectivehinged cover.Calibrated up to 380 l/min with dual scale bar/PSI & °C/°F. (USGPM also available)EM20 Electronic MonitorGives a full digital display.Automatically calibrated for all 3 sizes of sensor.Indicates line, differential and rising peak pressure.Easily scrolled from metric to US.300 test memory.Capable of downloading saved data todownload software.Typical ApplicationsDrilling equipmentMiningGrinding and conveyingIndustrial hydraulicsMobile applications<strong>Hydraulic</strong> system users need to ensure that lostproduction is kept to the absolute minimum.To ensure this, predictive maintenance utilisingroutine condition monitoring of hydraulic systems isessential.System20 inline sensors remain at the heart of conditionand contamination monitoring. Whether you’re miningthe coal, building the new bypass, harvesting the crops,crossing the oceans or drilling offshore – whatever yourindustry, System20 represents the premier systemmonitoring available today.3612 sizes of System20 Inline Mobile Sensors are availableParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
System20Inline Sensors & MonitorsSpecification: SensorsConstruction:Industrial: (STI)Body: S/Steel 303Internal components: S/Steel and BrassMobile: (STS)Body: S/Steel 303Internal components: Cast Aluminium andS/SteelFlow capacities:All suitable for use with oil, water and oil/water emulsionSize 0: 6-25 l/min (0.5-7US GPM)Size 1: 20-100 l/min (1.5-26 US GPM)Size 2: 80-380 l/min (5-100 US GPM)Max. working pressure:420 bar (6000PSI)Capability:Reverse flow (STI only)Pressure drop:At max. rated flow, Δp is 1.1 bar (mineral oilfluid at 30 cSt 140 SSU).Ports:Size 0: G 3 /8Size 1: G 3 /4Size 2: G1 1 /4Repeatability:±1% FSDAccuracy:Flow ±2.5% full scale deflection*Weight:Size 0: 0.5kg (1.2lbs)Size 1: 3.5kg (8.4lbs)Size 2: 4.4kg (9lbs)Aggressive Fluid Applications:EPDM internal/external sealsSystem20 Saving £50,000 Pump DamageInstalling System 20 was part of a major restructuring planto improve mining effectiveness and profitability. Machineoperator training and oil storage operative training wereessential elements of the plan. Prior to this investment, pumpterminal damage could cost £10,000 for a replacement, over£1000 service costs and up to £39,000 in lost production.Add to this the difficulties of the mine’s geography and it’seasy to see the problems that have now been overcome.Ordering InformationStandard products tableDimensions (mm)Mobile IndustrialSize Model AØ B C0 STI 30 95 561 STI 41 137 66.52 STI 66.7 231.3 73.51 STS 41 105 792 STS 60 165 97System20 reduces the cost of lost ProductionThe mining industry puts a considerable demand onhydraulics and there are others such as agricultural machinery,harvesters or tractors and, for example, cement manufacturingplants that are equally demanding of hydraulic efficiency.A grinding and conveying plant processes in excess of 1000tons of ore per day in the manufacture of cement products. Adays lost production costs £000’s. After one year of operationthe Plant Engineers decided to invest in System20 equipment,strategically placed to allow the Engineers to ‘fault-find’the major components quickly and easily. The result is thatdowntime and loss of production have been reduced by 80%.STI0144100STI1144100STI2144100STI0148100STI1148100STI2148100STS5117210STS5217210Product numberSupersedesSTI.0144.100STI.1144.100STI.2144.100STI.0148.100STI.1148.100STI.2148.100STS.5117.210STS.5217.210Size01201212Flow rangeI/min6-2520-10080-3806-2520-10080-38020-10080-380Fluid typeMineralMineralMineralAggressiveAggressiveAggressiveMineralMineralNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Note 3: Mobile Sensors are also available - Contact ParkerNote 4: *Accuracy 5.5% > 95 L/min. (Applies to STI1144100 and STI1148100 only)Portthreads3/83/41 1 /43/83/41 1 /43/41 1 /4Reverse FlowcapabilityYesYesYesYesYesYesNoNo362Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
System20EM20 Electronic MonitorElectronic Monitor SpecificationConstruction:A sealed assembly requiring no routine maintenance or adjustment.Body moulding in Acrylonitrile Butadene Styrene (ABS). Key padmoulded in silicon rubber. The monitor is suitable for use with allmineral oils, water and oil/water emulsions.LCD detailsFlow section:The analogue flow scale has reverse flow and overflow indication andprovides a percentage reading of the digital full scale displayautomatically calibrated for all sizes of System 20 Sensor.Pressure section:Designed to indicate line pressure, differential pressure and risingpeak pressure. Connected to a System 20 Sensor it will monitorpressure up to 420 bar (6000 psi) with an accuracy of ±1% FSD.Temperature section:Temperature reading between -10°C and +110°C (14°F to 230°F).Weight:1.4kg (3lbs).Data logging:Each test logs the following data:Test number; time & date; sensor size; media tested; flow rate,pressure & temperature.Data download:The System 20 electronic monitor is capable of downloadingsaved test data to a compatible PC via an RS232 connection usingdatum.Batteries:6 x AA batteries.Re-calibration:Annual certification by an approved Parker Service Centre.Dimensions (mm)Hoseretainers291mm (11.46in)PurgeknobFunctionkeysDisplayBatterycovers1000mm (39.4in) nominal105mm (4.13in)76mm (3in)Ordering InformationStandard products tableProduct numberSupersedesDescriptionEM209000ACC6NJ000ACC6NJ001EM20.9000P653607B85617System 20 electronic monitorTransit caseDongle and cable assemblyNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.363Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
System20Analogue MonitorAnalogue Monitor SpecificationConstruction:A sealed assembly requiring no routine maintenance or adjustment.Body moulding in Acrylonitrile Butadene Styrene (ABS). The monitoris suitable for use with all mineral oils, water and oil/water emulsions.The monitor has 3 dayglo dial gauges and features a protectivehinged cover.Gauge detailsFlow section:The flow scale has double scales for size 1 and 2 sensors only.Calibrated up to 100 l/min (26 US GPM) and 380 l/min (100 US GPM).The flow dial has excess-flow indication.Pressure section:Dial readings in both bar and psi up to 420 bar (6000psi).Temperature section:The temperature dial gives readings between -10°C and +110°C(14°F to 230°F).Weight:1.4kg (3lbs).A viscosity chart is provided for mineral oil applications wheremonitoring is required at variable viscosities (cSt).When the system is in reverse flow or when the high pressure lines tothe sensor have been transposed, a ‘below zero’ indication is given.Note: For measuring size Ø sensors - contact ParkerDimensions (mm)HoseretainersSystemflow rate292mm (11.50in)PurgeknobSystempressureSystemtemperature1000mm (39.4in) nominal108mm (4.25in)67mm(2.64in)198mm (7.79in)Ordering InformationStandard products tableProduct numberSTM6211110STM6611110STM6211120STM6611120SupersedesSTM.6211.110STM.6611.110STM.6211.120STM.6611.120Media typeOilOilWaterWaterFlow readingsl/minUS GPMl/minUS GPMNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.AccessoriesProduct number SupersedesDescriptionACC6NJ000ACC6NJ002P653607P653106Transit caseMetal sensor protective capPressure readingsDual scale bar/PSIDual scale bar/PSIDual scale bar/PSIDual scale bar/PSITemperature readingsDual scale °C/°FDual scale °C/°FDual scale °C/°FDual scale °C/°F364Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MCM20Autoremote Particle CounterPermanentinstallation ensures24/7 monitoring ofsystemsOnline continuous particlecounting to protect fluidsystemsMCM20 online continuous particlecounting ensures constant systemmonitoring within defined parameters.PC/PLC controlled, it can be pre-setto carry out tests at specific intervalsand connects permanently to aSystem20 sensor via a 2-metre hoseassembly.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• MCM20 online continuous particle counting ensures constantsystem monitoring within defined parameters.• Calibration carried out to ISO11171 via ISO11943 principles.Multi-standard ISO and N<strong>AS</strong> reporting including fullcount/100 ml. detection at size ranges.• Interactive handset options available for direct testsequencing, change test parameters and last test results.• PC/PLC controlled.• Can be pre-set to carry out tests at specific intervals.• Connects permanently to System20 sensors via 2 metrehose assembly.365Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MCM20Autoremote Particle CounterFeatures & BenefitsThe MCM20 is an online continuous particlecounter ensuring constant system monitoringwithin defined parameters.PC/PLC controlledEnsures constant system monitoring.Can be pre-set to carry out tests at specificintervals.Can be set up via optional detachable Handset.Enclosed in a metal casing, with internalworkings on a removable chassis for ease ofservice and calibration.Connects permanently to System20 sensors via2 metre hose assembly (supplied).Simple data formatting programme for trendanalysis.OPTIONAL HANDSETTypical ApplicationsTest rigsConstruction machineryIndustrial plant<strong>Hydraulic</strong> equipment & system manufacturersPaper processingSteel rolling millsMilitary equipment applicationThe Parker MCM20Using proven portable particle counting technology (icountLCM20),the MCM20 and its principles are available to users wherecontinuous, permanent installed monitoring is required.The MCM20 utilises the latest laser diode method of particlecounting. The unit is enclosed in a metal casing with access to thehydraulic connection, DC input power, fuse holder and PC/PLCconnection ports located on the front panel.The internal workings are manufactured onto a removable chassis forease of service and calibration.366Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Test cycle time:Variable between 30 seconds and 3 minutes.Repeat test time:Continuous Mode or between 30 seconds and 1440 minutes(24 Hours).Principle of operation:Optical scanning analysis and measurement of actual particles.Particle counts:6 channels either ACFTD or MTD calibrated.International codes:ISO 7-22, N<strong>AS</strong> 0-12.Storage temperature:-40°C to +80°C (104°F to 176°F).Operating temperature:+5°C to +60°C (41°F to 140°F) (hydraulic oil temperature).Unit control connection:Terminal protocol via RS 232 or optional handset.Data retrieval:Local PC / PLC program or by optional handset.Calibration:By accepted on-line methods confirmed by relevantInternational Standard Organisation procedures.Re-calibration:Annual certification by an approved Parker Service Centre.Max. working pressure:420 bar (6000 PSI).Minimum working pressure:2 bar (29 PSI).Fluid compatibility:Mineral oil or petroleum based fluids.Aggressive fluid version also available.Sample requirements:0.3 – 1.5 DP bar (differential pressure) via approved inlinesampling concept.System connection:Via System 20 inline sensors / single point samplerComputer compatibility:Interface via RS 232 connection @ 9600 baud rate.Weight:8.75kg.Power requirement:12 Vdc input. (1.25A (T) fuse). Regulated.Installation:Back/base M6x1.0 mounting inserts (see annotated diagrams).Software:LabView demonstration software.Dimensions (mm)191Over fixing screws1874 mounting holeM6 x 1.064 120 CTRS24911724663‘Power on’green LED90 CTRS182220254M16 adaptors(P2 & P1)1.25A fuse367Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MCM20Autoremote Particle CounterThe comms protocol for the productis as follows:Baud rate = 9600Data bits = 8Parity = NoneStop bits = 1Flow control = NoneLabviewOptional Remote HandsetOptional remote handset fordirect interface control.Please consult Parker formore information.Customiseddemonstration/softwarefor MCM operation.Full graphic display.Visual indication of limitparameters.Standard products tableProduct numberSupersedesDescriptionMCM202022MCM202022HSMCM202021MCM202021HSMCM202061MCM202061HSMCM202062MCM202062HSACC6NB001ACC6NB002ACC6NN003ACC6NN004MCM20.2022MCM20.2022.HSMCM202021MCM202021HSMCM202061MCM202062MCM202061HSMCM202062HSB94106B94107B94802B94801A/remote particle counter for mineral fluids (MTD calibrated)A/remote particle counter for mineral fluids (MTD calibrated) with HandsetA/remote particle counter for mineral fluids (ACFTD calibrated)A/remote particle counter for mineral fluids (ACFTD calibrated) with handsetA/remote particle counter for mineral fluids (ACFTD calibrated)A/remote particle counter for mineral fluids (ACFTD calibrated) with handsetA/remote particle counter for mineral fluids (MTD calibrated)A/remote particle counter for mineral fluids (MTD calibrated) with handsetHandset (Blue keypad) mineral fluidsHandset (Red keypad) agressive fluids2 meter mineral hose assembly2 meter aggressive hose assemblyNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.368Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountPDOnline Particle DetectorFor mineral oil, aggressive fluids or fuelsIndependentmonitoring of systemcontamination trendsThe icountPD Particle Detectorfrom Parker represents the mostup to date technology in particledetection. The design dynamics,attention to detail and mouldingcompactness of the permanentlymounted, on-line particle detectormodule, combined with on-board,laser based, leading-edgetechnology, brings to all industries atruly revolutionary, particle detectoras aremarkable cost effectivemarket solution to fluid managementand contamination control.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT,BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comicountPD for mineral oil applicationsProduct Features:• Independent monitoring ofsystem contamination trends.• Warning LED or digital displayindicators for Low, Mediumand High contamination levels.• Visual indicators with powerand alarm output warnings.• Moisture %RH indicator(optional).• Cost effective solution toprolong fluid life and reducemachine downtime.• MI2 8pin or DeutschConnector options.• Continuous performance forprolonged analysis.• Fuel, <strong>Hydraulic</strong> and phosphateEster fluid compatibleconstruction.• Self diagnostic software.• Full PC/PLC integrationtechnology such as:- RS232and 0-5Volt, 4-20mA,CAN(J1939) (Contact Parkerfor other options).• Set up and Data loggingsupport software included.369Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountPDOnline Particle DetectorFeatures &BenefitsDiagnostic Self Check Start-up Time:Customer selectable 5-900 secondsMeasurement Period:5to180 secondsReporting interval through RS232:0to3600 secondsDigital -/LED display update time:Every secondLimit Relay Output:Changes occur +/- 1ISO code at set limit (Hysteresis ON) or customerset (Hysteresis OFF)Particle /%RHOutput Signal:ContinuousPrinciple of operation:Laser diode optical detection of actual particulates.Reporting Codes:ISO 7 – 21, N<strong>AS</strong> 0 – 12, (<strong>AS</strong> 00 – 12 Contact Parker)Icount will also report less than ISO 7, subject to the statisticaluncertainty defined in ISO4406:1999, which is shown in the RS232,reporting results as appropriate e.g “>6”Calibration:By recognised on-line methods, confirmed by the relevant InternationalStandard Organisation procedures.Calibration Recommendation:12 monthsPerformance:+/- 1ISO Code (Dependant on stability of flow)Reproducibility /Repeatability:Better than 1ISO CodePower Requirement:Regulated 9to40VdcMaximum Current Draw:150mA<strong>Hydraulic</strong> Connection:Mineral M16x2 test PointsAggressive: 5/8” BSF test PointsFuel: No test Points 1/8 BSP (Female) Ports (Plugged)Required Flow Range through the icountPD:40 to 140 ml/min (Optimum Flow =60ml/min)Online Flow Range via System 20 Inline Sensors (<strong>Hydraulic</strong>systems only):Size 0=6to25l/min -(Optimum Flow =15l/min)Size 1=24to100 l/min -(Optimum Flow =70l/min)Size 2=170 to 380 l/min -(Optimum Flow =250 l/min)Required Differential Pressure across Inline Sensors:0.4 bar (Minimum)Viscosity Range:1-500 cStTemperature:Operating Environment -20°C to+60°C (-4°F to+140°F)Storage -40°C to+80°C (-40°F to+176°F)Operating Fluid 0°C to+85°C (+32°F to+185°F)Working pressure:2to420 bar (30-6000 PSI)Moisture sensor calibration (Not offered with the fuel version):±5% RH (over compensated temperature range of +10°C to+80°C)(+50°F to+176°F)Operating humidity range:5% RH to 100% RHMoisture sensor stability:±0.2% RH typical at 50% RH in one yearCertification:IP66 ratedEMC/RFI – EN61000-6-2:2001EN61000-6-3:2001Materials:User friendly Abs construction.Stainless Steel hydraulic block.Dimensions:182mm x155mm x86mm (7.2” x6.1” x3.4”)Weight:1.3kg (2.9lb)Seals:Mineral: Fluorocarbon. Aggressive: EPDM. Fuel: Fluorocarbon.icountPD for use with aviation fuelsField Data -Major International AirportFirst 3measurements represent fuelfrom aprevious cargo followed by aregular clean delivery, thus demonstratingthe range of fuel cleanliness beingexperienced at this particular location.>4µ >6µ >14µ >21µTest 1 81058.3 62126.1 17817.6 6066.2Test 2 87834.5 74763.0 35454.1 18044.4Test 3 51383.4 32796.9 4424.8 1213.4Test 4 1593.3 422.7 9.6 1.7>4µ >6µ >14µ >21µTest 5 1226.1 261.5 2.4 0.4Test 6 1085.7 210.9 1.3 0.1Test 7 1037.9 198.7 1.3 0.1icountPD for use with aviation fuels370Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Dimensions / Installation DetailsMaximum Torque 5NmTypical ApplicationsMobile Equipmento Earth Moving Machineryo Harvestingo Forestryo AgricultureMonitoring of the hydraulics, enabling the vehiclesto function to their best capability under loadconditions through pistons, servo valves, controlrams and gear pumps.Industrial Equipmento Production Plantso Fluid Transferso Pulp & Papero RefineriesTo monitor the cleanliness of the equipmentthroughout the production line, from the machinetool controlled hydraulics through to contaminationof fluid transfer. Ensuring the integrity of the fluid ismaintained throughout the refining process.Power Generationo Wind Turbineso Gearboxeso Lubrication SystemsWith continuous monitoring the optimum level isachieved in the least amount of time.Maintenanceo Test Rigso Flushing StandsTo increase efficiency of your equipment bycontinuously monitoring the cleanliness level of thehydraulic fluid.Fuel Contamination Detectiono Fuel Storage Tankso Vehicle fuel tankso Uploading fuel into an aircraft24/7 detection of particulate levels in most fuelsincluding aviation fuel - Jet A-1 fuel specification.371Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountPDOnline Particle DetectorM12 Communication cable: wiring configurationM12 Communication cablePin 4-20mA option connections 0-5v/0-3v option connections12345678NOT USEDRS232 Ground (Pin 5**)Channel A, ISO 4μm(c)*Channel B, ISO 6μm (c)* or N<strong>AS</strong>(if selected)RS232 Receive (Pin 3**)RS232 Transmit (Pin 2**)Moisture sensor channel (if fitted)Channel C, ISO 14μm (c)*NOT USEDRS232 Ground (Pin 5**)Channel A, ISO 4μm(c)*Channel B, ISO 6μm (c)* or N<strong>AS</strong>(if selected)RX232 Receive (Pin3**)RS232 Transmit (Pin 2**)Moisture sensor channel (if fitted)Channel C, ISO 14μm (c)*Comms CableImportant Note: It is the responsibility of the end user to ensure that the cable’s braided screenis terminated to a suitable earth bonding point.* Optional – refer to the ‘IcountPD part number specifier’ section in this manual.** A standard USB serial adaptor can be used with the recommended 9-way D-typeconnector to convert RS232 to USB.Limit relay alarm levelsThe IcountPD can be specified with a built-in limit switch relay which can be triggered when a preset alarm levelis reached. The relay contacts can be used to switch on or off an external device.M12 Supply and Relay (if fitted) cablePin12345678Current loop options connectionsProduct supply 9-40Vdc4-20mA Supply 12-20VdcRelay (Normally Closed)*** (if fitted)Relay (Normally Open)*** (if fitted)NOT USEDNOT USEDMain supply 0VdcRelay (Common)*** (if fitted)0-5v/0-3v option connectionsProduct supply 9-40Vdc0-5 / 0-3V Supply 12-24VdcRelay (Normally Closed)*** (if fitted)Relay (Normally Open)*** (if fitted)NOT USED0-5V / 0-3V Supply 0 VdcProduct supply 0VdcRelay (Common)*** (if fitted)Note: If the moisture sensor is fitted without either option then the output is RS232.Parker Hannifin recommend that the mating M12 connector cables are screened. Thesecables are available from Parker Hannifin – ordering information section.*** Optional – refer to ordering information section.(Limit Relay Wiring Instructions)NORMALLY OPENNORMALLY CLOSEDCOMMONSupply & limit RelayCable372Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Variable mA output settingsMilliamp OutputISO V MILLIAMP (MA)20.018.016.014.012.010.08.06.04.02.00.00 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21ISO CODEMilliamp Output2018161412108642001234N<strong>AS</strong> V MILLIAMP (MA)5 6 7 8 9 10N<strong>AS</strong> CODEVariable voltage output settings111213The following table can be used to equate the analogueoutput to an ISO or N<strong>AS</strong> Code.Example ISO code 12 is equal to 10mAmA4.04.55.05.56.06.57.07.58.08.59.09.510.010.511.011.512.012.513.013.514.014.515.015.516.016.517.017.518.018.519.019.520.0ISO0123456789101112131415161718192021****************OVERRANGEOVERRANGEERRORmA4567891011121314151617181920N<strong>AS</strong>000123456789101112****ERRORThe following table can be used to equate theanalogue output to an ISO or N<strong>AS</strong> Code.Example ISO code 12 is equal to 10mA4-20mA output settingsISO SettingmA current = (ISO Code / 2) +4 eg. 10mA = (ISO 12 / 2) +4orISO Code = (mA current - 4) *2 eg. ISO 12 = (10mA -4) *2N<strong>AS</strong> SettingmA current = N<strong>AS</strong> Code +5 eg. 15mA = N<strong>AS</strong> 10 +5orN<strong>AS</strong> Code = mA current -5 eg. N<strong>AS</strong> 10 = 15mA – 5The variable voltage output option has the capability of two different voltage ranges: a 0–5Vdc range asstandard, and a user-selectable 0–3Vdc range. The ‘Full list of commands’ on how to change the voltageoutput, are available from Parker.The following tables can be used to relate the analogue ouptut to an ISO or N<strong>AS</strong> code.For example, in a 0–5Vdc range, ISO code 16 is equal to an output of 3.5Vdc. In a 0–3Vdc range, ISO code 8is equal to an output of 1.0Vdc.Table relating ISO codes to Voltage outputISO0–5Vdc0–3VdcErr4.8>2.45Table relating N<strong>AS</strong> codes to Voltage outputISO0–5Vdc0–3VdcErr2.8373Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountPDOnline Particle DetectorDigital display parameters (ISO 4406/N<strong>AS</strong> 1638)Start up1. Once the icountPD has been connected to a regulated power supply, the product logo is displayed forapproximately five seconds as the IcountPD performs a self system diagnostic check.2. The IcountPD then automatically starts monitoring using factory default test parameters.(c) MTD calibratedChannel sizes/LimitsAutomatic light sensorMeasured ISO codes%RH Moisture sensor readingNotes: ISO 17/16/14 andMS = 43% RH if fittedDigital display indicationThe digital display will show the actual measured codes, the channel (μ) size and the user definable limits.Note that the channel size and limits will alternate between the two.The Moisture Sensor reading (%RH) will also be shown – if the Moisture Sensor option is fitted.The order of trigger for both the codes and Moisture Sensor option is:• Solid digit(s) = code(s) that are at or below the set point (limit)• Flashing digit(s) = code(s) that are above the set point (limit)The display for ISO4406 and N<strong>AS</strong>1638 are identical.Error detection:In the unlikely event of a error occurring, the digital display on the icountPD will simply display the actualerror code only – i.e. ERROR 13 (A full list of error codes are detailed in the IcountPD User Manual).Moisture sensor output settingsThe Moisture Sensor is an option that can be included when ordering the icountPD.The Moisture Sensor reports on the saturation levels of the fluid passing through the icountPD sensing cell.The output is a linear scale, reporting within the range of 5% saturation to 100% saturation.Table relating Saturation levels in the sensing cell to icountPD outputsSaturation 4–20mA 0–3Vdc 0–5Vdc5%25%50%75%100%4.881216200.150.751.502.253.000.251.252.503.755.00374Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Auxiliary Flow Device - P/N S840074The pressure compensated, Flow control device(Part Number S840074) has been developed togive the icountPD user greater flexibility. The Flowcontrol device will enable testing where flow rangesare outside the icountPD specifications (40 – 140ml/min), or where pipe diameters do not allow theicountPD to be installed.The Flow control device fits onto the downstream(outlet) side of the icountPD, connecting through amanifold block, via a self-sealing quick connection testpoint and is fitted with a differential pressure valve.This Flow control device automatically compensatesfor pressure and viscosity changes, whilst maintainingits setting even as the workload changes.Simply position the valve to match the viscosity of theoil you are testing.The chart can be used to determine the valveposition:Auxiliary Flow Device - P/N ACC6NN019This simple to use flow control device fits onto thedownsgtream (outlet) side of the icountPD and isfitted with a differential pressure valve that adjussthe system flow to a range inside the icountPDspecifications. Contact Parker for more details.Note: use this chart todetermine the valve position:Valve Position33.84.25cSt Rangeup to 10090 - 200190 - 320310 - 500Example:If the fluid you wish to analyse has a viscosity of50cSt under normal operating conditions then thecontrol knob on the Flow Control Device should beset to valve position ‘3’The flow device will now automatically control theflow rate through the icountPD to within its workingrange of 40-140ml/min.Note: The Flow control device will still operate correctly even with thehigh pressure side at 200bar and the return back to an open systemof 0 bar (DP = 200bar)P/N ACC6NN019Icount PD – Oil Cleanliness Indicator (icount PD OCI)• New and under development in the detection ofcontaminates distribution in various Aviation fuels.• Portable monitoring tool providing fluidqualification to ISO 4406:1999 standards.• Supplements the icount ACM20 productportfolio.• Quick, simple to use monitoring tool for samplingfluids from containers, fuel bunkers and holdingtanks.• Field solution to Laboratory methods for thedetection of solid contamination and free waterinference.375Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountPDOnline Particle Detector<strong>Hydraulic</strong> Connection DiagramDimensionsIcountPDP2P1High PressureLine Side78.2G1/8 ports either sideof mounting block46.550.058.290.020.078.2113.2“In”4 holes 6.60 Thro’InFlow ControlDevice2 bar check valveOutTo AtmosphereActuatorMounting TypeMounting positionWeightFluid TemperatureAmbient storage temperatureViscosity rangeDifferential pressure rangeMaximum pressureFlow directionPort thread detailInternal SealsLow PressureReturn SideManual flow rate adjustable via control knob4 off mounting holes to suit M6 screws (not supplied)Any1.7kg (3.7lb)5°C to +80°C (+41°F to 176°F)-20°C to +40°C (-4°F to +104°F)20cSt to 500cSt (If lower than 20cSt contact Parker)5 to 315 bar315 bar‘IN’ to ‘OUT’ flow control function1/8” BSPP (test points not supplied)Fluoroelastomer49.2“Out”38.0 Ctrs62.080.0 CtrsThis application shows uploadingfuel into an aircraft with theicountPD in use to monitor as a‘go/no go’ device.376Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Communication OptionsThe icountPD may be configured using the icountPD Setup Utility. For more direct control of the device using itscommunications protocol, you may also use the Microsoft Windows ® HyperTerminal program, but note that thisprogram is not currently supplied with the Windows Vista operating system. These two ways of communicatingwith icountPD are described in the following section.icountPD Setup Utility software (supplied)Communication ProtocolThe Communication protocol for the serialcommunication link is to be used with MicrosoftWindows HyperTerminal. The settings are as follows:Baud rate 9600Data bits 8Parity NoneStop bits 1Flowcontrol NoneThe commands used with this product are made upof Read, Set and Start / Stop commands.• Set commands allow the value or values ofparameters to be set• Read commands allow the value or values orparameters to be read• Start/Stop allows the user to start and stop tests.Example:[SDF dd/mm/yy] - sets the date format.[RDF] - reads the product date format.All commands are sent in <strong>AS</strong>CII characters, andthe protocol accepts both upper and lower casecharacters as the examples below:SDFSdFNote: A full list of commands are detailed in the usermanual377Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountPDOnline Particle DetectorOrdering InformationStandard Products TablePart number Fluid type Calibration Display Limit relay Communications Moisture sensor Cable connector kit Future optionIPD12212130IPD12212230IPD12222130IPD12222230IPD12312130IPD12312230IPD12322130IPD12322230MineralMineralMineralMineralMineralMineralMineralMineralMTDMTDMTDMTDMTDMTDMTDMTDLEDLEDLEDLEDDigitalDigitalDigitalDigitalNoNoYesYesNoNoYesYesRS232 / 4-20mARS232 / 4-20mARS232 / 4-20mARS232 / 4-20mARS232 / 4-20mARS232 / 4-20mARS232 / 4-20mARS232 / 4-20mANoYesNoYesNoYesNoYesM12 - 8 pinM12 - 8 pinM12 - 8 pinM12 - 8 pinM12 - 8 pinM12 - 8 pinM12 - 8 pinM12 - 8 pinN/AN/AN/AN/AN/AN/AN/AN/AProduct ConfiguratorKey Fluid type Calibration Display Limit relay Communications Moisture Cable connector kitIPD 1 Mineral 1 ACFTD 1 None 1 No 1 RS232 1 No 00NoIPDZ 2 Phosphate ester 2 MTD 2 LED 2 Yes 2 RS232 / 4-20mA 2 Yes 10 Deutsch 12-pin DT Series connectorIPDR 3Aviation fuel3 <strong>AS</strong>4059 3 Digital3 RS232 / 0-5V30 M12, 8 pin plug connector(4 channel)4 RS232 / RS4854 GSM5 RS232/CAN-busAccessoriesPart numberMineral fluidsACC6NE003ACC6NN003ACC6NN005ACC6NN007ACC6NN009ACCNN011SPS2021S840074ACC6NN019Aggressive fluidsACC6NN002ACC6NN004ACC6NN006ACC6NN008ACC6NN010ACC6NN012SPS2061Contact ParkerContact ParkerACC6NN013ACC6NN014 Contact ParkerACC6NN016ACC6NN017ACC6NN018Description1 metre hose length2 metre hose length5 metre hose length1 /4” BSP fitting1 /8” BSP fitting1 /8” BNPT fittingSingle point samplerFlow control deviceFlow control valve12 volt regulated power supply2 x 5 metre M12 - 8 pin cable kit*Deutsch Connector KitRS232 To USB cable kitM12 - 8 pin to RS232 engineers tool* M12 Cable kit consists of two 5 metre cables to enable all output options(Communications cable and Relay/Power Supply cable)* * Note that the aggressive fluid hoses are provided as a single hose, not in pairs.Part number Supersedes Size Flow range l/minSTI0144100STI1144100STI2144100STI0148100STI1148100STI2148100STS5117210STS5217210STI.0144.100STI.1144.100STI.2144.100STI.0148.100STI.1148.100STI.2148.100STS.5117.210STS.5217.210012012126-2520-10080-3806-2520-10080-38020-10080-380Fluid typeMineralMineralMineralAggressiveAggressiveAggressiveMineralMineralPort threads3 /83/41 1 /43 /83 /41 1 /43 /41 1 /4Reverse FlowcapabilityYesYesYesYesYesYesNoNo378Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Early Warningicount Lubrication and <strong>Hydraulic</strong> OilMonitoring systemAn all-in-oneparticle detectionsystemDeveloped around theproven Parker icountPDparticle detectorParticle detection is the best knownway to determine whether oil iscontaminated or not and the best wayto detect particles online or offline isby using Parker’s icountPD. To makeresults even easier to obtain we addedsome extra equipment.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:Wind turbines• Gear boxes• <strong>Hydraulic</strong> systems in pitch, yaw and brakeShipping and shipbuilding industry• Propulsion systems• Thrusters• Deck machinerySteel and pulp & paper industry• Lubrication oil systems• <strong>Hydraulic</strong> system control of presses and windersPower generation• Lubrication oil systems• <strong>Hydraulic</strong> system control for fuel feeding379Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Proactive maintenance with icountWith the icount System, the early bird stands every chanceof catching the worm.Be that early bird andschedule oil changes throughpredictive maintenance ofthe system and plan servicetimes. Parker’s icount systemprovides early warning ofany unwanted changes inhydraulic or lubrication oilquality. Thus increasing theavailability of the machineryby reducing the need forunnecessary downtime.Insurance companies areable to lower fees as theicount System warns ofpossible component failure.It also reduces the warrantycosts thanks to an integratedpump unit that enables a costeffective solution to monitoroil from different points of asystem.icount SYSTEMStandardOptionsElectric motor 230VAC 110VAC, 24 VDCPumpXFlow control unitXPressure control valvefor pressurized systemsParticle detectoricountPDLocal display led none, digital, GSMCommunications RS232 RS232/4-20mA, RS232/0-5V, RS232/CanbusMoisture sensorXLimit RelayXCable connector kitM12 -8pinShort start moduleXMounting bracket sealed boxParker’s icount System housing can include several options to quarantee uniformsample handling and measuring any required aspect of oil quality.You can trust icount accuracyParker icount Lubricationand <strong>Hydraulic</strong> Oil MonitoringSystem is available today.It features Parker’s lasertechnology and all necessarycomponents for reliablemonitoring up to 1000 cSt oilviscosities. The unit allowssystem monitoring andaccurate particle detectionfrom any available source.A moisture sensor as anoption to measure the relativehumidity of the oil and otheradd-on sensors like viscositymeasurement are alsoavailable.Several power versionsfor easy installation andworldwide operation areavailable. The system iscapable of data transmissionin multiple forms and centralcontrol can collect informationand manage easily forexample large marine windfarms off shore and on land.A special design for windturbine applications withpressurized connection isavailable. Correct oil pressureand steady flow ensureconsistent measuring.icountPDFor more information contact Parker.The icountPD Particle Detectorfrom Parker represents themost up to date laser basedtechnology in particle detection.Standard in every icountMonitoring System.380Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
H2Oil - Water inOil MonitorFluid Condition MonitoringMonitoring watercontact duringsystem operationMeasure the level of watercontent polluting your oilH 2 Oil is a two-channel, non-dispersiveabsorption spectrometer designed tomeasure the level of water contentpolluting your oil. Fully portable, H 2 Oilcan operate without the need formains power. A 90 second test timeand 500 test memory together withdata entry and on-board printer asstandard makes H 2 Oil an outstandingperformer in the field or factoryenvironment.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:•H 2 Oil is a two-channel, non-dispersive absorptionspectrometer, designed to measure the level of watercontent polluting oil.• Fully portable unit without the need for mains power.• 90 second test time and 500 test memory.• Data entry and on-board thermal printer.www.parkerhfde.com381Parker Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Division</strong> <strong>Europe</strong> <strong>Europe</strong>FDHB500UK.
H2Oil - Water in Oil MonitorFluid Condition MonitoringFeatures & BenefitsWater monitoring is now possible during systemoperation - H2Oil saves on productiondowntime.Fully portable, can be used easily in the fieldwithout the need for mains power, as well as inthe laboratory.Connects into system at pressures up to 420 bar,via either system 20 sensor or single point sampler.90 second test time.Scrolling memory for 500 tests plus memory for20 different oil calibration curves.Routine water monitoring of oil systems with H2Oilsaves time and money, promoting oil longevity.Samples that are tested are truly representativeof water in the system. Analysis carried outbefore sample hydrodynamics change.Data entry facility enables user to store uniquedata test log details with every test carried out.Instant, accurate results are available on thedisplay or the built-in thermal printer ensuringmaintenance decisions can be taken immediately.Computer interface available for downloadingdata on to the computer through the RS232serial port.Internal diagnostics features ensures H2Oil willwork accurately and reliably.Supplied in a robust aluminium carrying case.Optional oil delivery kit for simple offlinesampling.Oil delivery unitP/N S840134Typical ApplicationsOff-shore & power generationMarineConstruction machineryPaper mills<strong>Hydraulic</strong> equipment & system manufacturersResearch & testing institutesMilitary equipment applicationThe H2Oil is a two channel non-dispersive absorptionspectrometer, designed to measure the level of watercontent polluting the oil, reducing system efficiency,promoting wear and affecting safety.The H2Oil makes it possible for an end user or serviceengineer to carry out quick, accurate measurements,taken in the field instead of remote laboratory analysis.With its secured hoses the H2Oil connects to an in-lineSystem 20 sensor or single point sampler and features are-chargeable 12Vdc power pack, diagnostic computer andon-board printer for effective logging and retrieval of data.382Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationConstruction:Case-Noryl structural foam and ABS printercover. Key pad silicone rubber.Mechanical composition:Brass, plated steel, stainless steel.Seals:Fluorocarbon.Hoses:Nylon (Kevlar braided microbore).Hose length:Fluid connection hose 1.2 metre (3.9 feet).Flow rate:Up to 400 l/min (100 US GPM).(System 20 Sensors). Higher flows with SPS.Max. working pressure:Up to 420 Bar (6000 psi).Fluid compatibility:Mineral oil and petroleum based fluids.Power:Re-chargeable battery pack (12Vdc tricklecharger supplied).Fuse:5.0 amp fast blow fuse included foroverload protection.H2Oil technology:Infrared absorption spectroscopyMeasurement and range:PPM (0-3000) or % content.Max operating temperature:+5°C to +80°C (+41°F to +176°C).Environmental temperature:+5°C to +40°C (+41°F to +104°F).Test completion time:90 seconds.Memory store:500 TEST (scrolling memory) capacity.Printer facility:Integral 16 column thermal printer for hardcopy data.Computer interface RS232.Repeatability/accuracy:Better than 5% (typical).Viscosity range:2-100 cSt (9-460 SSU). 500cSt with SPS.Commissioning kit:Includes 2 re-chargeable battery packs(1 fitted to monitor), 2 x thermal printerrolls, spare fuse,screwdriver, 12Vdc tricklecharger and user manual.Data entry:24 character two line back lit dot matrixLCD. Full alpha numeric keypad.Data retrieval:Memory access gives test search facility.Monitor carry case:Robust aluminium transportation case.Data Download:Condition monitoring data software packplus cable included in commissioning kit.Performance recheck:Annual recheck of performance by anapproved Parker Service Centre.318mm (12.51”)346mm (13.62”) handle raised235mm (9.25”)130mm20mm(5.12”)(0.79”) 180mm (7.09”)FACT: The H 2 Oil can be considered the best alternative solution re-agent chemicalKarl Fischer analysis test methods, which is being considered to phase out understrict <strong>Europe</strong>an legislation regarding the use of carcinogenic fluids, a fundamentalpart of all Karl Fischer test procedures383Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
H2Oil - Water in Oil MonitorFluid Condition MonitoringHow the H2Oil WorksOn-line testing allows a mixed and flowing sample of oil andwater to pass through the infrared measuring cell. A seriesof measurements can be taken and the average given as aresult. With this method a representative oil sample is seen,unlike the usual reservoir samples sent for analysis. Also,by taking the test at working temperature and pressure, atrue water content is taken, as both affect the way water isabsorbed in oil.The flowing sample passes through a special “water free”optical cell.The infrared detector monitors two narrow band passfilters, one of which matches the spectral width of the waterattenuation band. The second narrow wave band selectedis unaffected by water and serves as a reference. By takingthe transmission ratio between the two points an effectivemeasurement of water can be made.Core TechnologyH2Oil uses true infrared (IR) analysis technique - the principleused in all laboratory spectrometers, to measure absorbedwater (before saturation point).Channel one (2.6μ) is the reference point, whereas channeltwo (3μ) is H2O.Effective Oil MaintenanceTake a typical application where water can have a verydetrimental effect on bearings. Cracks are generated earlyin life of a bearing and water, once condensed in the crack,leads to corrosion and early damage.Loss of bearing life, due to water contamination, (see below)can be prevented by stopping the water from entering thesystem in the first place. Introducing a regular water contentmonitoring function into the programme, such as the H2Oil,would support such efforts.% Bearing Life Remaining25020015010050The IR source is a tungsten halogen bulb.Whatever the application, whether it be offshore in the oilindustry or off-road in the construction or earth movingindustry, the portability of the H2Oil makes it an essential kitfor the service van or engineers tool.Ordering InformationStandard products tablePart number SupersedesWOM9100EUR N/AWOM9100UKN/AWOM9100USN/AACC6NC003B91701ACC6ND003B91706ACC6NC000N/AACC6NC001N/AACC6NC002N/ADescriptionWater in Oil Monitor with <strong>Europe</strong>an Power SupplyWater in Oil Monitor with UK Power SupplyWater in Oil Monitor with US Power SupplyThermal printer roll (x5)Download cable and adaptorH2Oil Trickle power supply (UK)H2Oil Trickle power supply (EURO)H2Oil Trickle power supply (US)Note 1: Part numbers featured with bold highlighted codes will ensure a‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contactParker Filtration for availability.0% Water In Oil384Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountMS RangeFluid Condition Monitoring – MoistureSensorsAn essentialcomponent ofany predictivemaintenanceprogrammeFast, reliable and accurateinline detection of moisturein fluidsMS moisture sensors provide fast,reliable and accurate inline detectionof moisture in fluids. Technologydeveloped for preventativemaintenance programmes. MS150 isthe ‘low pressure’ option for suctionline/reservoir applications. MS200 isthe ‘Programmable’ sensor monitoringand reporting relative humidity (RH),moisture content in oils. MS300‘Intrinsically safe’ sensor ATEXcertified for use in hazardous Zone 0environments.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:•MSmoisture sensors provide fast, reliable and accurate inlinedetection of moisture in fluids.•Technology developed for preventative maintenanceprogrammes.•MS150 ‘low pressure’ suction/Return line applications. 10bar maximum operating pressure.•MS200 ‘Programmable’ sensor monitoring and reportingrelative humidity (RH), moisture content in oils. 420 barMAOP.•MS300 ‘Intrinsically safe’ sensor ATEX certificated for use inhazardous Zone 0environments. 420 bar MAOP.•Temperature Outputs on all versions.www.parkerhfde.com385Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountMS RangeCost Effective Moisture DetectionFeatures &BenefitsContinuous, online moisture indication, forhydraulic and lubricating systems.Reporting of %relative humidity of watercontent, giving the user information on howclose to the fluids real saturation point.Reliable data on the rate of water absorption.Sensing cell technology using alaser trimmedthermoset polymer, for capacitive sensing thatis capable of absorbing water molecules due toits micro porous structure.Uses athermistor for temperature compensationcorrection. Offering total confidence in reportingthe %RH relative humidity over the sensorstemperature range.Apurpose designed tee adaptor allows for easyinstallation into an existing fluid system.The MS200 can also be specified with abenchtop wand offering the end user greater flexibility.Not available on MS150Typical ApplicationsGround support vehiclesPulp and paper plantsMarine hydraulicsPower transmission &distributionForestryIndustrial hydraulicsEarth moving applicationsAgriculturalHazardous Areas (Zone 2)Theme parks (Ridehydraulics)In-Line Moisture Measurement of <strong>Hydraulic</strong>&Lubricating Oils.Parkers Moisture Sensor Range offers fast, reliable and accuratein-line detection of moisture in fluids. The MS transducer typetechnology has been especially designed with the preventativemaintenance programme environment in mind.The industry accepted sensing cell device will monitor and reportRelative Humidity (RH), moisture content in oils. The water contentmeasurement technique offers the end user benefits over the currentstandard form of water content reporting (PPM).This allows for real time preventative maintenance to be undertakenand corrective actions to be made. By knowing that the watercontamination is still within the oils absorbing range, less than 100%,reclaiming fluid properties before additive damage occurs can initiatecalculable cost savings.386Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MS150 Moisture SensorSpecificationPressure:Maximum allowable operating pressure. (MAOP): 10 bar (145 PSI).Operating temperature:Minimum: -20°C (-4°F).Maximum: +85°C (+185°F).Flow through sensor cell:Installed in active flowstream.Fluid compatibility:Mineral oils, petroleum-based andPhosphate ester.Viscosity range:Unlimited.Port connections:1 /4” BSPT or 1 /4” NPT.Supply voltage:+8 to +30 Vdc.Sensor size/weight/material:80mm x 43mm/0.1kg/AluminiumIP ratings:IP68%RH Outputs:(+1 to +5 Vdc) or (4 to 20mA)Temperature Outputs:0to+5VdcInstallation Details87-8840.0 A/F 24.0 41.0Thread Form OptionsBSPT15.0Ø38.0Ø10.0Ø10.0R 1 /4 BSPT11.0maximumAll dimensions in millimetres (mm)Sensor OutputsDimensions are for reference onlyFlow in either directionTappingdrillTap to gauge10.8 withreamer11.2 withoutreamerPin12345DesignationSupply%RH%RHTemperatureCommonMS150 moisture sensor pin designationsI/OInputOutputOutputOutputInputDescriptionSupply voltage (+8 to +30Vdc)% Saturation out (+1 to +5Vdc)% Saturation out (+4 to +20mA)Temperature out (0 to +5Vdc)Common (0Vdc) ground frompower supply (not chassis ground)NPTØ10.0Installation details for R 1 /4 BSPT taper17.0Interpreting the dataOil type: Texaco Rando 46.Saturation point: 400ppm @ 65ºC (150ºF).At the above operating condition, the meter displays 100%saturation. As the meters scale indicates a reduction in thesaturation percentage, there is also a corresponding reductionin PPM at a constant temperature. In the example above,a meter reading of 50% saturation could be interpreted as200ppm at 65ºC (150ºF).Flow in either direction1/4 NPT11.0maximumTappingdrill10.7 withreamer11.1 withoutreamerInstallation details for 1 /4 NPT387Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MS200 ‘Programmable’Specification% Saturation Calibration Accuracy: +3% RHTemperature Calibration Accuracy: ±1°CThermal Stability:±1% RH (over compensated temperature range +10 to +80°C)Stability:±0.2% RH typical at 50% RH in 1 yearLinearity:±0.5% RH typicalAnalogue Output Hysteresis:±0.5% RH Full ScaleSwitched Output Hysteresis:2% RHOperating Temperature Range:-40°C to +85°C (-40 to +185°F)Operating Humidity Range:5 to 100% RH (non condensing)Response Time: 60 sec in slow moving air at 25°CMaximum rated pressure:420 Bar (6000 PSI)Maximum torque on spanner flats: 30 Nm (ONLY USE SPANNER FLATS TO INSTALL ANDREMOVE THE MOISTURESENSOR)Seal Material (depending on MS): Fluorocarbon, EPDM, PerfluoroelastomerMaterial: Stainless Steel 303Connector Details:M12x1, 8 Way, IP67 Connector (IP68 when mated with moulded cable)Maximum Cable Length:10 Metres with Voltage Output100 Metres with Current OutputOutput:SEE ORDERING INFORMATIONInstallation DetailsØ50.0 24.0106-10757.013.0Ø26.010.0Ø12.04.024.0 A/FHexagonThread detaildice patternM12 x 1.0 pitch42.0Moisture Sensor Wiring and Pin DesignationsPin Wire Colour Designation I/O Description1 Brown Analogue Output Temperature - Degí Celsius.User Select Output (0-3Vdc, 0-5Vdc, 1-6Vdc and 4-20mA).2 Green Alarm Limit Output Alarm Limit.Output that directly corresponds to the alarm set point.3 Yellow Analogue Output % Saturation.User Select Output (0-3Vdc, 0-5Vdc, 1-6Vdc and 4-20mA).4 Grey Receive Input RS232 Communication.5 Pink Send Output RS232 Communication.6 Blue Common Input Common (0Vdc).Ground from power supply.Pin 2Pin 8Pin 17 White Alarm Switch Output Alarm Switch.Constant 5Vdc when in normal operation.Switch to 0Vdc when in alarm condition.Red LED illuminates when Sensor is in an alarm condition.8 Red Supply Input Supply Voltage (+8 to +30Vdc).Green LED illuminates when power is properly applied.388Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
MS300 Intrinsically SafeSpecificationPressure:Maximum allowable operating pressure.(MAOP): 420 bar (6000 PSI).Operating temperature:Minimum: -40°C (-40°F) - dependent on seal material.Maximum: +85°C (+185°F).Flow through sensor cell:Installed in active flowstream.Fluid compatibility:Mineral oils, petroleum-based and Phosphate ester-Skydrol option available.Viscosity range:Unlimited.Thread form connections:See ordering information.Outputs:4-20mA (current loop).Calibration accuracy:+/- 5% RHCompensated thermal stability:+/- 1% RH (+ 10°C to +80°C)Materials:Stainless steel 303.Sensor size/weight:107mm x ø50mm/0.3Kg.IP ratings:IP68 (with specified moulded cable)Developed in association with Triteq Ltd.Installation Details - See MS200The MS300 has been certified as Intrinsically Safe Electrical Apparatus and offers fast, reliable and accuratein-line detection of moisture in fluids for use in hazardous areas.ATEX Certification allows the MS300 into areas of a potentially explosive atmosphere, that have previously notbeen allowed without permits, it is intended for use in Zone 0 hazardous areas requiring the use of category 1Gequipment and has been designed for use with galvanic isolators to the specified values stated below:The electrical parameters: Ui: 28V Ii: 93mA Pi:0.65W Ci: 380nF Li: 0The following instructions apply to MS300 - 4-20mA Current Loop Moisture Sensor covered by certificatenumber Sira 07ATEX2255:1. The equipment may be located where flammable gases of Group I may be present. The equipment is onlycertified for use in ambient temperatures in the range -20°C to +40°C and should not be used outside this range.2. The equipment has not been assessed as a safety-related device (as referred to by Directive 94/9/EC Annex II,clause 1.5).3. Installation of this equipment shall be carried out by suitably trained personnel in accordance with theapplicable code of practice.4. Repair of this equipment shall be carried out by the manufacturer or in accordance with the applicablecode of practice (IEC 60079-19).389Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Visual Indicators SpecificationsBar Graph Indicator (PBG8341A)Construction:Housing – nylon 6/6, window – acrylic,bezel/board supports – ABS,pins – phosphor bronze.Power supply:11 – 30 Vdc.Signal input: (By dipswitch configuration)Off – differential up to 5V.A – single signal (Ref. 0V) up to 5V.B – single signal (Ref. 1V) up to 6V.Cut out size:45.6mm x 45.6mm.Fixing:Push fit panel thickness 0.9mm to 3.2mm.Sealing:Designed to IP50 standard.(Front face may be silicon sealed after LED configuration).Scale:Supplied 0 to 100% in horizontal.Other scales, in volume, consult Parker Hannifin.Scaling factors:10% to 100% range. Fully adjustable.Lamp intensity:4mcd each.Front viewing:Polarised.Weight:29gms.Alternative IndicatorDescriptionPower supplyAccuracySample rateOperating temp (°C)Storage temp (°C)DisplayPower output (Vdc)Weight (kg)Panel cutout (mm)Dimensions (mm)PBG8341ADDU100111-30Vdc± 0.1% typical2.5 per second0-50-10 to +703.5 digit LED240.3093x45 ± 0.548x96x93DDU1001/DDU1002DDU1002110 - 240 Vdc± 0.1% typical2.5 per second0-50-10 to +703 1 /2 digit LED240.3093x45 ±/0.548x96x93Product accessories part numbersProduct Number Supersedes DescriptionDDU1001 P.9732PVC-10 Digital display unit 22-55 VdcDDU1002 P.9732PVC-05 Digital display unit 110-240 VdcPBG8341A PBG.8341.1A Bar Graph Indicator (+11 to +30 Vdc)PAM8342 PAM.8342 Bar Graph alarm moduleACC6NF000 B97200 5 meter M12, 8 pin moulded cable (IP68)ACC6NF001 P973200 M12, 5 pin rewireable connector (IP65)ACC6NF002 S970410 10 meter extension boxACC6NE008 S970400 UK 12 volt power supplyACC6NE009 S970400 <strong>Europe</strong>an 12 volt power supplyACC6NE010 S970400 US 12 volt power supplyACC6NF003 N/A 5 metre M12, 5 pin moulded cable (IP68)Moisture sensor output settingThe Moisture sensor reports on the saturation levels of the fluid passing through the sensing cell. The outputis a linear scale, reporting within the range of 5% saturation to 100% saturation.Saturation 4–20mA 0–3Vdc 0–5Vdc5%25%50%75%100%4.881216200.150.751.502.253.000.251.252.503.755.00390Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Ordering InformationMS150 Standard Product TableProduct Number Supersedes Fluid typeMS1503MS150-3Mineral + AggressiveMS1504MS150-4Mineral + AggressiveThread FormsG 1/4” BSPT Taper1/4” NPT TaperConnectorM12 5 WAYM12 5 WAYMS200 - Product ConfiguratorKey Model Fluid type Output Options Thread Forms Connector Future optionMS 2 Programmable 26MineralAggressive0102030-3Vdc0-5Vdc1-6Vdc123G 1/4” BSP Bonded SealG 1/4” BSP Integral SealR 1/4” Taper1 M12 8 WAY 0 No04 4-20mA 4 1/4” NPT Taper569/16 - 18 UNF 2A Integral SealHand Held Unit7 G 3/8” BSP Female Swivel Equal T adaptorMS200 - Standard Product TableKey Model Fluid type Output Options Thread Forms Connector Future optionMS 2202110MSMSMSMSMSMSMSMSMS222222222222222222020202020404040404234512345111111111000000000MS300 - Product ConfiguratorKey Model Fluid type Output Thread form Connector Future optionMS 3 Programmable 26MineralAggressive04 4-20mA 123G 1/4” BSP Bonded SealG 1/4” BSP Integral SealR 1/4” Taper Thread1 5 WAY 0 None4 1/4” NPT Taper Thread569/16 - 18 UNF 2A Integral SealG 3/8” BSP Female Swivel Equal TeeMS300 - Standard Product TableKey Model Fluid type Output Thread Forms Connector Future optionMSMSMSMSMS33333222220404040404123451111111111391Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
OilcheckHand-held Oil Condition MonitorPortable andbattery poweredfor ‘go-anywhere’monitoringHand-held condition monitorprovides a visual comparisonbetween new and used oilsParker’s Oilcheck is completelyportable and battery powered witha numerical display that indicatespositive or negative increase indielectrics. Oilcheck gives an earlywarning of impending engine failureand the simplistic hand-held designmakes it easy to use.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Oilcheck hand-held condition monitor provides a visualcomparison between new and used oils.• Completely portable and battery powered.• Numerical display shows positive or negative increase indielectrics.• Gives early warning of impending engine failure.www.parkerhfde.com392Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
OilcheckHand-held Oil Condition MonitorFeatures & Benefits• A comparator between new and used oils.• Oilcheck gives early warning of impendingengine failure.• Cost effective solution to save moneyand help increase engine life.• Completely portable, battery powered.• Ideal for fleet owners, garages and DIYmechanics.• Numerical display to show positive or negativeincrease in dielectrics.Using OilcheckFollowing the simple sampling procedure. Parker’sOilcheck will ensure effective and highly repeatableresults. Once a clean oil sample has been placed inthe ‘Sensor Well’ and the ‘TEST’ button has beenpressed, the instrument will ‘zero’ on the sample.Once cleaned out with a degreaser and replaced bya contaminated sample, a new reading is obtainedon the LCD, which can be easily compared againstthe green/amber/red efficiency scale.Typical ApplicationsFleet ownersConstruction equipment maintenanceVehicle service garagesPlant hire maintenanceThe Oilcheck from Parker Filtration’s ConditionMonitoring Centre detects and measures thedielectric constant of oil, by comparing themeasurements obtained from used and unusedoils of the same brand.Used as a regular service monitoring instrument,the Oilcheck will give the engineer warning of animpending engine failure and promote increasedengine life. Oilcheck is the low-cost solution thatwill take the guesswork out of oil changes, savingmoney and time.393Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationUsing OilcheckCase construction:ABS.Circuitry:Microprocessor control.Battery:1 x 9V alkaline (supplied).Display:LCD.Suitable oil types:Mineral and synthetic based oils.Repeatability:Better than 5%.Readout:Green/amber/red grading, Numerical value (0-100%).Battery lifetime:>150 hours or 3,000 tests.Dimensions:250mm x 95mm x 34mm (9.8” x 3.7” x 1.3”).Weight:0.4kg.Green/amber/rednumerical valueThe Oilcheck can remove the need for costlyand time consuming laboratory analysis ofmineral and synthetic oils used in engines,gearboxes and bearing lubrication systems.It detects mechanical wear and any loss oflubricating properties in the oil with a repeataccuracy of less than 5%.The Oilcheck is able to show changes in theoil condition brought about by the ingress ofwater content, fuel contamination, metalliccontent and oxidation.Installation DetailsFunctionbuttonsØ95VisualdisplayNumericaldisplaySamplesensor250Re calbuttonTestbuttonOn/OffHi/Lo switchOrdering Information64 3234Standard products tableProduct numberOLK605OLK611DescriptionOilcheck kit with numerical readoutOilcheck cleanerNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.394Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountACM20 Lab UnitAviation Fuel Contamination MonitoringNote: For information on icountPD for aviation fuels see page 369Aunique productwith pedigreeDEFSTAN 91-91 Issue 6Jet A-1FuelSpecification, adopts particle counting.Development work carried out by the CMCengineers, in conjunction with Exxon MobilAviation, highlighted the need for an alternativetest method to determine the levels of dispersedcontamination in Jet fuel. 5years of field testingand development of the already establishedand successful icountLCM20 <strong>Hydraulic</strong> LaserParticle Counter saw the introduction of theParker icountACM20 with enhanced softwareproviding the user with abetter understandingof the contamination present in asample.As the benchmark particle counter for use inmeasuring the levels of contamination in fuels,the icountACM20, as per the UK’s EnergyInstitute Test Method IP564, has now beenincluded in the DEFSTAN 91-91 Issue 6JetFuel Specification as areport only test alongsidethe current Gravimetric test method (IP423 or<strong>AS</strong>TM D5452) and Clear &Bright Visual testmethod (IP216 or <strong>AS</strong>TM D2276)Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• icountACM20 monitorsaviation fuel contamination toDEFSTAN 91-91 Issue 6JetA-1 fuel specification.• Energy Institute Test MethodIP 564.• 2-minute test procedure.• Fully manufactured by Parkerwith 20 years experience inthe Particle Counter Measuringmarket.• Laser optical scanninganalysis.• Multi-standard ISO cleanlinessreporting.• On-board, rear-mountedpump enables monitoringpossibilities.For example: Fuel storage/vehicle tanks and fuel storagedrums.• Latest averaging software asstandard.• Downloader software.395Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountACM20 Lab UnitAviation Fuel Contamination MonitoringFeatures &BenefitsTest Time:2minutesRepeat Test Time:Every 2minutes (Manual testing), every 6minutes (automatic)Principle of Operation:Optical scanning analysis and measurement of actual particles andinference to water presencePrimary Output:≥4µ(c), ≥6µ(c), ≥14µ(c), ≥21µ(c), ≥25µ(c), ≥30µ(c) counts per mlSecondary Diagnostic Output:%Volume Distribution, via graphical display on handset and printoutInternational codes:ISO 7-22 in accordance with ISO 4406-1999Data entry:32 character two line dot matrix LCD. Full alpha numeric entryfacility on keypadData retrieval:Memory access gives test search facility for up to 300 saved testsCalibration:In accordance with Parker Calibration Procedure CM20-N, whichcomplies to ISO11171:1999, Clause 6(Omitting Annex F)Re-calibration:Every 12 months by adedicated Parker Service Centre (ConsultParker) as required under strict EI methodsMax. working pressure:420 barOperating Temperature:+5°C to+80°CMemory store:300 test capacityComputer compatibility:Interface via RS 232 connection @9600 baud rate (USB serial cableto RS232 option available)Laboratory sampling:Utilizes on-board rear mounted pumpPortability:Only 8kg. icount ACM20 has its own battery pack and carry case withwheels 13kg total weightPower requirement:12vDC input, 6x‘D’ Cell batteries or rechargeable battery packPrinter facility:Integral 16 column printer for hard copy dataCertification:Complies with all relevant EC declarations of conformityicount ACM20 Case Mounted Pump• Integrated Pump assembly incorporated onto the ACM20 unit.• Powered directly from ACM20 unit, LED power indication with noadditional power supplies required.• Direct sampling from fuel sample bottles or tank via 3metre inletsuction tube.• Incoporated double speed flush and test sequence.• Managed flow rate/correct volume sample as per IP 564 testmethod.FACT: icountACM20 is fully compliant with the EI (Energy Institute) test methodApplicationsThe Parker icountACM20 Portable Particle Counterhas been developed from existing technologyfor monitoring contamination in AvTur and otherhydrocarbon fuels, in accordance with the EnergyInstitute (EI) Method IP 564.In addition, the ACM can also be used to monitorvarious fuels from existing sampling points inlocations from refineries, pipelines, distributionterminals, airport fuel supply systems all the waythrough to the point of uplift into aircraft*.* Hot works permit required for online sampling (ATEX Zone 2unitavailable). Page 14.• Fuel Testing Laboratories – DEFSTAN 91-91Issue 6In order to better understand dispersedcontamination in jet fuel, particle counting isnow included alongside existing laboratorytechniques• Bottle Sampling -Energy Institute (EI) -IP564Laboratory determination of the level ofdispersed contamination in aviation kerosineusing an Automatic Particle Counter (APC)• Replace Clear &Bright and GravimetricWith the introduction of the icount ACM20,all subjectivity surrounding Clear &Bright andGravimetric methods can be removed• Also for use on petroleum based hydraulicapplications (Skydrol compatible available)Suitable for use with mineral oil andpetroleum based fluid as per standardhydraulic particle counter, reporting fluidcleanliness to ISO 4406:1999396Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationConstruction:ABS structural foam and injection moulded caseHand-held display - ABSKeypad flurosilicone rubberMechanical Components:Brass, plated steel, stainless steel and aluminiumSeals:FluorocarbonHoses:Nylon (Kevlar braided microbore). St. steel armoured endsFlow Rate:25 - 28ml/min (dictated by CMP) 100ml/min with additional flush buttonFluid Compatability:Hydrocarbon Fuel, Mineral Oil. For other fluids consult ParkerFuse:1.25 amp fast blow fuse included for overload protection (sparesupplied)icountACM20 Technology:Patented flow cell, light obscurationRepeatability/Accuracy:As per or better than ISO 11171Coincidence:40,000 particles per mlViscosity Range:1 -100 centistokesicountACM20 Weight:8kgMonitor Carrying Case:Astra Board caseCarrying Case Weight:5kgicountACM20 - rear viewInput Power Socket (note that youwill have to remove the plasticdust cap to access the 12Vdcpower socket).A fast blow 1.25A fuse and theRS232 connection are locatedbehind the removable cover plate.The RS232 interface is providedto download all test data stored inthe instrument. See the ParSmartDownloader software for moreinformation.Ordering InformationStandard products table - icount ACM20Product numberSupersedesDescriptionACM202022UKACM202022USACM202022EURACM202024UKACM202024USACM202024EURACC6ND000ACC6NE006ACC6NE019ACC6NW003ACC6NE029ACC6NE001ACC6NE013ACC6NE008ACC6NE010ACC6NE009ACC6NE020ACC6NE021ACC6NE022SERMISC067ACC6NE015ACC6NE014N/AN/AN/AN/AN/AN/AB84794B84816P843855B84746B84745B84645B84609B84817B84830B84831B84832N/AB84702P843702icountACM20 (UK)icountACM20 (US)icountACM20 (EURO)icountACM20 with lab kit - UK (DEFSTAN 9191)icountACM20 with lab kit - US (DEFSTAN 9191)icountACM20 with lab kit - EURO (DEFSTAN 9191)1 meter process cableParsmart downloader softwareicountACM20 transit CaseVapour/waste bottle assemblyThrottle kitMillipore adaptor kitRe-chargeable battery packUK power supplyUS power supplyEuro power supplyUK Offline kitEuro Offline kitUS Offline kit500ml verification fluidPrinter reel (x5)Printer ribbon (x1)Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Note 3: Selected spare parts - for a full list contact Parker.* Hot works permit required for online sampling.Field Monitoring -icountACM202022For use in non-hazardous areas, theicountACM202022 is designed for online samplingof hydrocarbon fuels and hydraulic systems, utilisingexisting “quick connect” sampling points such asthe Millpore Adaptor.397Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountACM20 Lab UnitAviation Fuel Contamination MonitoringDEFSTAN 91-91 Issue 6Defence Standard 91-91 is thespecification for aviation turbinefuel, which the United KingdomCivil Aviation Authority (CAA)has agreed is under thetechnical authority of theDirector of the Defence FuelsGroup.IP 564Laboratory determination of thelevel of dispersed contaminationin aviation kerosene using anAutomatic Particle Counter (APC).This standard describes amethod for determining the levelof dispersed contaminationin aviation kerosene fuels,specifically dirt particles andwater droplets in the range from≥4μ(c) to ≥30μ(c).This method relates specifically toAviation fuels but the equipmentcan be used on all fuels,petroleum and mineral basedfluids.Note:The mandatory implementationdate for IP 564 test method“Determination of the level ofcleanliness of aviation turbinefuel - laboratory automatic particlecounter” is July 1st 2009. It is thespecification authorities intentionto replace current test methodswith particle counting at the earliestopportunity.IP 564 ProcedureStep 1The apparatus shall be set upin accordance with Parker’soperating instructions.Step 2Test Portion Preparation:Decant a minimum of 450ml ofthe field sample into a clean testportion container.Step 3Prior to starting a test,tumble the test portionend over end for 60 seconds toensure any settled particles areredistributed.Step 4Turn on the Case Mounted Pumpand flush for 60 seconds.Do not press the fast flush button.While flushing, enter the testidentifier (see manual).Step 5Following the flush, start a testby turning the blue valve in thedirection indicatedPerform a further 3 tests. (4 intotal).398Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountPD Z2ATEX Approved Online Particle DetectorFor use in explosiveand hazardousareasThe icountPD Particle Detectorfrom Parker represents the mostup to date technology in solidparticle contamination analysis.This compact, permanentlymounted laser-based ATEXapproved particle detector moduleis designed for use in Zone 2 areasand is housed in a robust StainlessSteel IP69K approved enclsourethat provides a cost effectivesolution to fluid management andcontamination control.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• Independent monitoring ofsystem contamination trends.• Assembled in an approvedand certified Stainless Steelenclosure to comply with ATEXDirective 94/9/EC.• Can be used in explosive andhazardous areas.• ATEX Zone 2.• Certified to CE Ex II 3GD,Ex nAIIC T4 Gc,Ex tc IIIC Dc SIRA09ATEX4340X and IECEx SIR09.0137X (-30°C
icountPD Z2ATEX Approved Online Particle DetectorFeatures & BenefitsDiagnostic Self Check Start-up Time:Customer selectable 5-900 secondsMeasurement Period:5 to 180 secondsReporting interval through RS232:0 to 3600 secondsLimit Relay Output:Changes occur +/- 1 ISO code at set limit (Hysteresis ON) or customerset (Hysteresis OFF)Particle /%RHOutput Signal:ContinuousPrinciple of operation:Laser diode optical detection of actual particulates.Reporting Codes:ISO 7 – 21, N<strong>AS</strong> 0 – 12, (<strong>AS</strong> 00 – 12 Contact Parker)Icount will also report less than ISO 7, subject to the statisticaluncertainty defined in ISO4406:1999, which is shown in the RS232,reporting results as appropriate e.g “>6”Calibration:By recognised on-line methods, confirmed by the relevant InternationalStandard Organisation procedures.Calibration Recommendation:24 monthsPerformance:+/- 1 ISO Code (Dependant on stability of flow)Reproducibility / Repeatability:Better than 1 ISO CodePower Requirement:Regulated 9 to 40VdcMaximum Current Draw:150mA<strong>Hydraulic</strong> Connection:Size: 066Connection: EO 24 cone endOrdering InformationProduct ConfiguratorRequired Flow Range through the icountPD:40 to 140 ml/min (Optimum Flow = 60ml/min)Online Flow Range via System 20 Inline Sensors (<strong>Hydraulic</strong>systems only):Size0=6to25l/min - (Optimum Flow = 15 l/min)Size1=24to100l/min - (Optimum Flow = 70 l/min)Size 2 = 170 to 380 l/min - (Optimum Flow = 250 l/min)Required Differential Pressure across Inline Sensors:0.4 bar (Minimum)Viscosity Range:1-500 cStTemperature:Operating Environment -30°C to +60°C (-22°F to +140°F)Storage -40°C to +80°C (-40°F to +176°F)Operating Fluid +5°C to +80°C (+41°F to +176°F)Working pressure:2 to 420 bar (30-6000 PSI)Moisture sensor calibration (Not offered with the fuel version):±5% RH (over compensated temperature range of +10°C to +80°C)(+50°F to +176°F)Operating humidity range:5% RH to 100% RHMoisture sensor stability:±0.2% RH typical at 50% RH in one yearCertification:IP69K ratingEMC/RFI – EN61000-6-3:2007EN61000-6-2:2005Materials:Stainless Steel case construction.Stainless Steel hydraulic block.Dimensions:260mm x 114mm x 110mmWeight:2.6kgSeals:Fluorocarbon seals.Key Fluid type Calibration Display Limit relay Communications Moisture Cable connector kitIPD 1 Mineral 1 ACFTD 1 None 1 No 1 RS232 1 No 00NoIPDZ 2 *Phosphate ester 2 MTD 2 LED 2 Yes 2 RS232 / 4-20mA 2 Yes 10 Deutsch 12-pin DT Series connectorIPDR 3Aviation fuel3 <strong>AS</strong>4059 3 Digital3 RS232 / 0-5V30 M12, 8 pin plug connector(4 channel)4 RS232 / RS485*Consult Parker Filtration4 GSM5 RS232/CAN-busStandard Products TablePart number Fluid type Calibration Display Limit relay Communications Moisture sensor Cable connector kitIPDZ12122230IPDZ12121230IPDZ12123230IPDZ12125230MineralMineralMineralMineralMTDMTDMTDMTDNoneNoneNoneNoneYesYesYesYesRS232 / 4-20mARS232RS232 / 0-5VRS232 / CAN-busYesYesYesYesM12, 8 pin plug connectorM12, 8 pin plug connectorM12, 8 pin plug connectorM12, 8 pin plug connectorAccessory Part NumbersDescriptionSingle Point SamplerExternal flow devicePower supply2 x 10 metre M12, 8-pin plug and socket Ultrat cable kitRS232 to USB converterNote: For System 20 Sensor part numbers see page 380.Part NumberSPS2021S840074ACC6NN013ACC6NN021ACC6NN017400Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountACM20 Z2ATEX Approved Portable Particle CounterFor use in explosiveand hazardousareasicountACM20 Z2 is designed tobe used to monitor various fuelsfrom existing sampling pointsin hazardous locations such asrefineries, pipelines, distributionterminals, airport fuel supplysystems all the way through tothe point of uplift into aircraft. WithZone 2 classification, the icountACM20 Z2 is the worlds onlyATEX approved particle counter.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• Assembled in an approvedand certified stainless steelenclosure to comply with ATEXDirective 94/9/EC.• Can be used in explosiveand hazardous areas,including offshore and miningapplications.• ATEX Zone II• Certified to CE Ex II 3GExnR/nL IIC T6• “A” Class product defined forthe Aviation market.• ATEX approved Handset andkeypad.• Suitable for use with mineraloil and petroleum based fluidas per ACM20/LCM20 particlecounters.401Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountACM20 Z2ATEX Approved Portable Particle CounterFeatures & BenefitsTest Time:2 minutes.Repeat Test Time:Every 2 minutes (Manual testing) Every 6 minutes (Automatic).Principle of Operation:Optical scanning analysis and measurement of actual particles andinference to water presence.Primary Output:≥4μ(c), ≥6μ(c), ≥14μ(c), ≥21μ(c), ≥25μ(c), ≥30μ(c) counts per ml.Secondary Diagnostic Output:% Volume Distribution, via graphical display on handset.International codes:ISO 7-22 in accordance with ISO 4406-1999Data entry:32 character two line dot matrix LCD. Full alpha numeric entry facilityon keypad.Data retrieval:Memory access gives test search facility for up to 300 saved tests.Calibration:In accordance with Parker Calibration Procedure CM20-N, whichcomplies to ISO11171:1999, Clause 6 (Omitting Annex F).Re-calibration:Every 12 months by a dedicated Parker Service Centre (ConsultParker).Max. working pressure:420 bar.Operating Temperature:+5°C to +80°CMemory store:300 test (scrolling memory) capacity.Computer compatibility:Interface via RS 232 connection @ 9600 baud rate.Portability:15 kg. ACM20 has its own battery pack and carry case with wheels.Power requirement:Rechargeable battery powered or via the 12vDC input.System connection:Via Millipore adaptor with flow restriction through supplied needle valve.Certification:Complies with all relevant EC declarations of conformity.Printer facility:No printer. Data download only.Online Commission Kita – icountACM20 Zone II Particle Counterb – Battery Chargerc – Process Cabled – User Manuale – Downloader Softwaref – Throttle Kitg – Millipore Adaptor Assemblyh – Aluminium Casei – Bottle Assemblybacdgifeh402Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationUsing icountACM20 Z2Construction:Unit: Stainless SteelCarrying case: ABSHand-held display: ABSKeypad: polyester membraneMechanical components:Brass, plated steel, stainless steel and aluminiumSeals: FluorocarbonHoses: Nylon (Kevlar braided microbore)Fluid compatibility:All fuels. For other fluids consult ParkerInternal rechargeable battery:Note: ONLY to be charged outside of the hazardous area,with the unit switched offFuse:1.25A fast blow fuse included for overload protectionReturn to Parker Hannifin if fuse is blownicountACM20 2032 technology:Unique optical scanning systemicountACM20 Z2 is designed to be used tomonitor various fuels from existing sampling pointsin hazardous locations from refineries, pipelines,distribution terminals, airport fuel supply systems allthe way through to the point of uplift into aircraft.With Zone II classification, the icountACM20 Z2 isthe worlds only ATEX approved particle counter.Applications in FuelsOil Refineryo To count and verify the levels of dispersedcontamination in accordance withspecification limits. (Consult Parker CMC).Distribution Terminals/Hubso For use on receipt and outbound supply.Also to provide filtration performance, tankcleanliness and product quality checks.Storageo Settling times can be reduced by monitoringwith the ACM by ensuring that levelsof dispersed contamination are belowacceptable levels.Airport Fuel Farmo Monitoring of fuels into storage, through thefuel farm, hydrant system and during uplift intowing.Pipeline Commissioningo Fast real time monitoring of pipelinesfollowing pigging and cleaning processes.Oil and Gas Platformso Used to monitor the filtration performance,system cleanliness and quality of deliveredproduct.403Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountACM20 Z2ATEX Approved Portable Particle CounterInstallation DetailsOrdering InformationStandard products table - icountACM20 Z2Product number Supersedes DescriptionACM202032UKACM202032USACM202032EURACM202034UKACM202034USACM202034EURACC6NE023ACC6NE025ACC6NE024ACC6NE027ACC6NE006ACC6NE028ACC6NW003ACC6NE029ACC6NE001N/AN/AN/AB84647B84652B84653B84650B84816P843066B84746B84745B84645icountACM20 Z2 + online kit & UK battery chargericountACM20 Z2 + online kit & US battery chargericountACM20 Z2 + online kit & Euro battery chargericountACM20 Z2 + online & lab kit + UK battery chargericountACM20 Z2 + online & lab kit + US battery chargericountACM20 Z2 + online & lab kit + Euro battery chargerUK battery chargerUS battery chargerEuro battery charger2m process cable assemblyParsmart downloader softwareCarry caseBottle assemblyThrottle kitMillipore adaptor assy404Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Applications in hydraulicsSolutions in the offshore industry.In addition, the icountACM20 Z2 can be used in manyhydraulic system applications as detailed below.In many industries, worker awareness needs to be maintainedat a high level to ensure the safety of their operation. Thisis particularly relevant to offshore oil-drilling and gas-drillingcrews, given the interactive and hazardous nature of theirwork. The Zone II ACM portable particle analyser is a tried andtested technology designed, proven and approved as a fluidcontamination monitor that crews are using and trusting insuch hazardous and demanding environments.OFFSHORE• Certified to CE Ex II 3GExnR/nL IIC T6• Can be used in explosive and hazardous areas, includingOffshore and Mining.• Primary Output. Six cumulative particle size channelsranging from ≥4μm(c) to ≥30μm(c) and numbers per mlin accordance with ISO4406-1999.REFINERIESicountACM20 Z2 – operational in oil refineries and fuel fields.Already operational in oil refineries and designed to be used inside commercial airfieldfuel locations and at the point of upload of fuel into the aircraft, icountACM20 Z2 hasan impressive success record in this approval sensitive area of operation.With a number of safety features designed in as operational standards, theicountACM20Z2 can be taken to the point of use, connected in moments andreporting in little more than 2 minutes to ISO approved standards.• Assembled in an approved and certified stainless steel enclosure to comply withATEX Directive 94/9/EC and EN50 021 requirements.• ‘A’ Class product defined for the aviation market.• Designed for on-line operation, connecting to the process line via existingMillipore fittings, already in use for other industry equipment.QUARRYINGApplications in other hazardous environments.• Railroad equipment manufacturer - Warranty protection.• Power generation stations - Preventative maintenance.• Mobile equipment - Roll-off cleanliness testing.• Mining operations - Service tool.• Steel mills - Preventative maintenance.405Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
icountACM20 Z2ATEX Approved Portable Particle CounterAverage Particle Counts in AV SystemThe table below gives estimated counts found in a typical aviation fuel distribution system, and is given as guidance, in whichAPI/EI filtration equipment is installed.Receipt into MicrofilterExpect 2,500 counts per mlor cleaner @ 4μ(c)Receipt into FWS (After MF)Expect 500 counts per mlor cleaner @ 4μ(c)Receipt into Storage (After FWS/MF)Expect 100 counts per mlor cleaner @ 4μ(c)FWS out of storageExpect 500 counts per mlor cleaner @ 4μ(c)After FWS into HydrantExpect 100 counts per mlor cleaner @ 4μ(c)After Monitor Into AircraftExpect 100 counts per mlor cleaner @ 4μ(c)MFFWSAirport storageFWSTo Hydrant/Refueller≥4μ(c)≥6μ(c)≥14μ(c)Receipt into MicrofilterHigh Count2,50035010Receipt into FWS (After MF)≥4μ(c)≥6μ(c)≥14μ(c)High Count500505Receipt into Storage (After FWS/MF)≥4μ(c)≥6μ(c)≥14μ(c)≥4μ(c)≥6μ(c)≥14μ(c)≥4μ(c)≥6μ(c)≥14μ(c)≥4μ(c)≥6μ(c)≥14μ(c)High Count100101FWS Out of StorageHigh Count500505After FWS Into HydrantHigh Count100101After Monitor Into PlaneHigh Count100101ISO Code - 4406 1999High Count Code181510ISO Code - 4406 1999High Count Code16139ISO Code - 4406 1999High Count Code14107ISO Code - 4406 1999High Count Code16139ISO Code - 4406 1999High Count Code14107ISO Code - 4406 1999High Count Code14107Note: Figures will vary from location to location.Key: MF=Microfilter (API/EI 1590)FWS=<strong>Filter</strong> Water Separator (API/EI 1581)406Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
<strong>AS</strong>IC ‘Performer’Pressure Transducers and Transmitters25, 60, 100, 250, 400 and 600 barOne productrange, designedfor many industryapplicationsAll Stainless SteelConstructionA quality range of transducers andtransmitters with pressure ratings -25, 60, 100, 250, 400 and 600 bar.One-piece body and diaphragmmachining ensures long-termstability and an all Stainless Steelconstruction ensures reliability. A costeffectivesolution in many industrialapplications.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• A quality range of transducers and transmitters with pressureratings - 25, 60, 100, 250, 400 and 600 bar.• One-piece body and diaphragm machining ensures longtermstability.• All Stainless Steel construction.• Cost-effective solution in many industry applications.• 0-5 Volt, 1-6 Volt Transducers.• 4-20mA Transmitters.• 1/4 ” BSP thread.• M12 or MicroDIN plug options.407Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
<strong>AS</strong>IC ‘Performer’Pressure Transducers and TransmittersApplications for the <strong>AS</strong>IC PerformerFork lift trucks - braking and load systems.Truck mounted cranes - load safety systems.Earth moving machinery - hydraulic gearbox control.Racing car - gearbox, fuel, cooling and suspension systems.Water usage systems - pressurised systems for industrial and hi-rise usage.Forest Machinery - felling and logging.Paper mills - speed control and weighing systems.The <strong>AS</strong>IC Performer offersa wide range of pressuresensors for mobile orindustrial applications.These sensors have beendesigned for the requirements of industrial instrumentationsystems. Accordingly, the housings and all components incontact with the medium are made of stainless steel. Thusgiving compatibility with a wide range of media. There is achoice of two plug connectors of either DIN or M12. There areThe Parker Filtration <strong>AS</strong>IC Performer PressureTransducers and Transmitters.six measuring ranges available anda choice of outputs in the form ofeither voltage or current signals.Sensors with output signals from4...20 mA are available in two wiretechnology.The built-in voltage regulator allows the sensors to be operatedwith a supply voltage of 12-36/9-36 Vdc. All sensors aremanufactured in our own production facility, typical of ParkerHannifin’s continued commitment to flexibility and quality.The CompletePerformer range utilises<strong>AS</strong>IC technology(Application SpecificIntegrated Circuit)programmablesoftware.A comprehensive range of Pressure Transducers andTransmitters are available from Parker Filtration.One-piece body and diaphragm machining ensureslong-term product stability.All stainless steel construction.6 transducer pressure ratings with 0-5Vdcand 1-6Vdc outputs.6 transmitter pressure ratings with a 2-wire4-20mA output.Microdin plug and M12 connector options.AC/DC display unit (DDU10012 or DDU1002)408Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
SpecificationPressure ranges:25, 60, 100, 250, 400, 600 bar.Pressure Tolerance Specifications:Rating2560100250400600Maximum OverloadPressurex 2 (50 bar)x 2 (120 Bar)x 2 (200 bar)x 2 (500 Bar)x 2 (800 Bar)x 2 (1200 Bar)Maximum BurstPressurex 3 (75 Bar)x 3 (180 Bar)x 3 (300 Bar)x 3 (750 Bar)x 3 (1200 Bar)x 2.5 (1500 Bar)Vibration resistance:IEC 60068-2-6:+/- 5mm/10Hz...32Hz200m/s 2 / 32Hz...2kHzInstallation:Spanner size 22A/F.Max. (recommended) tightening torque = 30Nm.Weight:200 - 230gLifespan:10 million cyclesThread FormsG 1 /4 ( 1 /4BSP) with ED seal.All thread forms and sensor interfaceare made from1.4301 stainless steel.Non standard threads - contactParker CMCElectricalSupply voltage Output12 - 36Vdc 0 - 5Vdc12 - 36Vdc 1 - 6Vdc9 - 36Vdc 4 - 20mATransducer current draw = 10KOutput signal noise = 0.1%FSProduct PerformanceLinearity:Typical: 0.3%FS.Max: 0.6%FS.Hysteresis:Typical: 0.1%FS.Max: 0.25%FS.Repeatability:Typical: 0.2%FS.Max: 0.4%FS.Functional temp range:-40°C to +85°C.Compensated temperature:-20°C to +85°C.Stability:
<strong>AS</strong>IC ‘Performer’Pressure Transducers and TransmittersOrdering InformationStandard products tableProduct numberDescription - pressure transducerModelOutputPressureThreadformConnectorPTDVB2501B1C1PTDVB4001B1C1PTDVB2501B1C2PTDVB4001B1C2PTDVB0251B1C1PTDVB0251B1C20 - 5 Vdc 250 bar 1 /4 BSP ED seal micro-din0 - 5 Vdc 400 bar 1 /4 BSP ED seal micro-din0 - 5 Vdc 250 bar 1 /4 BSP ED seal M120 - 5 Vdc 400 bar 1 /4 BSP ED seal M120 - 5 Vdc 25 bar 1 /4 BSP ED seal micro-din0 - 5 Vdc 25 bar 1 /4 BSP ED seal M12PTDPTDPTDPTDPTDPTDVBVBVBVBVBVB250400250400025025111111B1C1B1C1B1C2B1C2B1C1B1C2Product numberDescription - pressure transmitterModelOutputPressureThreadformConnectorPTXB4001B1C2PTXB0251B1C1PTXB0251B1C2PTXB4001B1C1PTXB2501B1C1PTXB2501B1C24-20mA400bar 1 /4 BSP ED seal M124-20mA25bar 1 /4 BSP ED seal micro-din4-20mA25bar 1 /4 BSP ED seal M124-20mA400bar 1 /4 BSP ED seal micro-din4-20mA250bar 1 /4 BSP ED seal micro-din4-20mA250bar 1 /4 BSP ED seal M12PTXPTXPTXPTXPTXPTXBBBBBB400025025400250250111111B1C2B1C1B1C2B1C1B1C1B1C2AccessoriesProduct numberSupercedesDescriptionP833PVC2MP833PVC5MP833PVC10MP.833PVC-2MP.833PVC-5MP.833PVC-10M2 meter PVC coated 4 core cable5 meter PVC coated 4 core cable10 meter PVC coated 4 core cableNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Product configuratorProduct numberOutput optionsPressure range (bar)Thread formConnectorPTDPTXVBSBBRBPB0 - 5 Vdc1 - 6 Vdc4 - 20mA (PTX only)0.5 - 4.5 ratiometric0.1 - 4.90250601002504006000-250-600 - 1000 - 2500 - 4000 - 60011/4 BSP with ED sealB1C1B1C2Micro-dinM12Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Examples of standard part number product orderingPTDVB2501B1C1 0 – 5 volt output transducer250 bar maximum pressure1/4” BSP with ED sealIndustrial micro-din 9.4mm connectorPTDSB4001B1C21 – 6 volt output transducer400 bar maximum pressure1/4” BSP with ED sealM12 connector(See accessories for IP68 protected cable)PTXB0251B1C24 – 20mA output transmitter25 bar maximum pressure1/4” BSP with ED sealM12 connector(See accessories for IP68 protected cable)410Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Flowmeters & MonitorsA range of cost saving solutionsProtect systems,reduce fluid and airloss and increaseefficiencyEffective and accurate flowmeasurementAn extensive range of flow meteringproducts. LoFlow oil and waterflowmeters. 10 bar max. workingpressure. Easiflow meters andflowswitches with flows from 1 to150 l/min. Dataflow 4-20mA andpulse output flow transmitters andthe Dataflow Compact inline flowtransmitter. Flowline oil, waterand air calibrated flowmeters andflowswitches available in brass orStainless Steel. <strong>Hydraulic</strong> Test Unitsfor the speedy diagnosis of hydrauliccircuit faults with flow ranges from 2to 360 l/min.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comwww.parkerhfde.comProduct Features:• LoFlow oil and water flowmeters. 10 bar max. workingpressure.• Easiflow meters and Flowswitches. Work in any plane. Flowsfrom 1 to 150 l/min.• Dataflow 4-20mA and pulse output flow transmitters andDataflow Compact inline flow transmitter.• Flowline oil, water and air calibrated flowmeters andflowswitches available in brass or Stainless Steel.• <strong>Hydraulic</strong> Test Units for the speedy diagnosis of hydrauliccircuit faults with flow ranges from 2 to 360 l/min.411Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
LoFlow - Oil and Water FlowmetersFlowmetersFeatures & BenefitsEasy to read, permanent printed scales.Large scale definition for precise measurement.Easy panel mounting assembly.Negligible pressure drop characteristics.10 bar pressure rating.Simple to use.SpecificationInstallation DetailsConstruction:BodyGrillon TR55.Back body half ABS 7020.Ball retainer ABS 7020.Back panel PVC.FloatSee below.Maximum working pressure:10 bar.Maximum workingtemperature:60°C.Accuracy:±2% typical.Repeatability:±1%.Connections:1 /4” and 3 /4” tapered threads.Note: Always install vertically.Simple to fit, easy to useThe LoFlow meter has been designed for those industrieswhere the need exists for a low cost solution to smallmeasurements of flow with an accurate reading. LoFlowuses the well tried and tested principle of variable area flowmeasurement utilising the movement of a ball or float insidea calibrated tapered bore.Typical ApplicationsPharmaceutical industryFiltration systemsHospital equipmentFor water applicationsWater treatmentPhotography and X-rayEquipmentSwimming poolsInstallation DetailsOrdering InformationOutlet port R 3 /43924Standard products table14Product numberSupersedesMediaPorts(BSPT male)Flow range (l/min)Floatmaterial44LF802412LF802413LF802414LF801431LF802432LF802434LF801411LF.2020LF.2100LF.2220LF.1002LF.1009LF.1090LF.2005WaterWaterWaterOilOilOilWater3/4 - 3 /43/4 - 3 /43/4 - 3 /41/4 - 3 /43/4 - 3 /43/4 - 3 /41/4 - 3 /40.2 - 2.02.0 - 10.03.0 - 22.00.010 - 0.200.1 - 0.91.0 - 9.00.06 - 0.55AcetalS/SteelS/SteelS/SteelAcetalS/SteelS/Steel14 188101Note 1: Part numbers featured with bold highlighted codes will ensure a‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contactParker Filtration for availability.4016Inlet portR 1 /4 /R 3 /44 off ‘push out’fixing slots Ø6 X 8 LG412Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Easiflow - Meters and FlowswitchesFlowmetersFeatures & BenefitsOil and water calibrated.Works in any plane.Pressures up to 10 bar.Flows from 1 to 150 I/min.Accuracy ±5% FSD.Repeatability ±1% FSD.Switches – fully adjustable flow rate signalling.Plant and equipment protection.Easiflow Meters SpecificationConstruction:ConeAcetalViewing glass Borosilicate glassCalibrated spring Stainless steelSealNitrileBodyGlass filled nylonMaximum working pressure:10 bar.Minimum working pressure:1 bar.Temperature range:+5°C to +80°C - Oil.+5°C to +60°C - Water.Flow rate:1 to 150 l/min.Viscosity range:10 to 200 centistokes (oil).Accuracy:±5% FSD.Repeatability:±1% FSD.Connections:1” BSP parallel threads.Weight:0.4kg.Flowswitch SpecificationsThe Easiflow switch is a flow measuring device incorporatingan AC/DC switch suitable for controlling valves or pumpmotors or for activating alarm signals.General flowmeter specification:See material details opposite.Switch type specifications:Magnetically operated reed switch.Electrical details:Voltage rangeMaximum currentMaximum load300Vac/dc2.5Amps100W resistive70W inductiveInstallation Details42 A/F HEX42 A/F HEXØ40Ø4010620156196Ø6020156196Ø60Ordering InformationStandard products table – Flowmeter onlyProduct numberEF7731111220EF7731112220EF7731113220EF7731114220EF7731110120EF7731111120EF7731112120EF7731113120EF7731114120EF7731110220SupersedesEFW.0302EFW.0502EFW.1002EFW.1502EFL.0151EFL.0301EFL.0501EFL.1001EFL.1501EFW.0152MediaWaterWaterWaterWaterOilOilOilOilOilWaterFlow range (l/min)2-304-505 - 10010 - 1501-152-304-505 - 10010 - 1501-15Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Standard products table – Flowmeter plus one switchProduct numberEF7731110221EF7731111221EF7731110121EF7731111121EF7731112121EF7731113121EF7731114121EF7731112221EF7731113221EF7731114221SupersedesEFW.015S1EFW.030S1EFL.015S1EFL.030S1EFL.050S1EFL.100S1EFL.150S1EFW.050S1EFW.100S1EFW.150S1MediaWaterWaterOilOilOilOilOilWaterWaterWaterFlow range (l/min)1-152-301-152-304-505 - 10010 - 1504-505 - 10010 - 150Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Switch range(l/min)5-155-305-155-3010-5020 - 10030 - 15010-5020 - 10030 - 150413Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Dataflow -4to20mA and PulseOutput Flow TransmittersFlowmetersFeatures & Benefits4 to 20mA output.Pulse output available for totalising/batching.Works in any plane.Accepts reverse flow.Maximum flow 150 l/min.Negligible pressure drop.Pressures up to 10 bar.Low cost. Simple to install.For use with most liquids.Factory calibrated. Accuracy ±2%.DIN 43650 plug connection (included).SpecificationInstallation DetailsConstruction:Borosilicate glasstube.Nitrile seals.Body – Glass filled nylon.Rotor and locater – Acetal.Washers and shaft – Stainless steel.Rotor tips – Stainless steel.Max. working pressure:10 bar oil/water.Flow indication:Min: 2 I/min.Max: 150 l/min.Accepts reverse flow.Accuracy:±2% FSD.Temp range:+5°C to +80°C oil.+5°C to +60°C water.Connections:1” BSP parallel threads.Weight:0.7Kg.Calibration 4 to 20mA:4mA = 0 l/min,20mA = 100 l/min.Calibration pulse output per litre:‘K’ factors.Oil = 51.14Water = 44.25Electrical details 4 to 20mA:Supply = 24Vdc.Pulse output:Supply = 24Vdc.(open collector transistor).Digital Display Specification (DFT 990 only)For indicator options please refer to MS150 section of thecatalogue, reference DDU1001 and DDU1002 indicatorsØ4020156196Ordering InformationStandard products tableProduct number SupersedesDFT980DFT.980DFT990DFT.99042 A/F HEXØ60106DescriptionDataflow "Pulse" output transmitterDataflow 4-20mA transmitterNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Dataflow 4-20mAtransmitter can beconnected to a DigitalDisplay Unit (DDU1001or DDU1002)4 to 20mA On-Site CalibrationSet your system to zero flow. Connect a multimeter acrossterminals 1 (+20mA) and (0mA) (Dia. 2). Set the zero to read4mA on your multimeter (Dia. 1). Set your system to full flowand set the span to read 20mA on your multimeter. (Dia. 1)Note: Minimum span setting = 30 I/minSet full flowto 20mADiagram 1 Diagram 2SpanFlow setupSliderZeroSet zero flowto 4mA0mA+20mAPlug wiring1 2EarthOVpower+24vpower414Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Dataflow Compact - Inline FlowTransmitterFlowmetersFeatures & BenefitsPulse output signal for flows up to 25 l/min.Lightweight and robust.Operates in any plane. Simple to install.Low cost flow measurement.Negligible pressure drop.Accepts reverse flow.3/8 BSP male connection.Water or compatible clear fluids only.Ideal for washing machines, showers andvending machines.SpecificationConstruction:Body Grilamid – TR55.Rotor 18% PTFE fillednylon.Shaft Stainless steel.ShaftRetainers Grilamid TR55.Operation:Infra-red.Maximum working pressure:20 bar.Pressure drop:Max 0.1 bar at 15 l/min.Flow range:1 to 25 I/min.(Accepts reverse flow).Calibration:‘K’ Factor 752 pulses per litre,typical.Subject to application.Accuracy:±2% typical.Installation DetailsRed wireGreen wireBlue wire+5V supplyOutput signal0V supply12.0 TYPRepeatability:±1%.Temperature range:+5°C to +70°C.Overall dimensions:52mm x 29mm x 27mm.Weight:16 grams.Connections:3 /8 BSPCable length:300mm.Power supply:5 Vdc.Output signal:5 Vdc - square waveDataflow Compact – The Low Cost TransmitterThe Dataflow Compact Transmitter was designed to offerOEM’s and end users alike a means of monitoring low flowson liquids with an electronic output signal – but at LOWCOST. Fluid passes through the one piece sensor bodyimpacting on the twin vaned turbine rotor, causing it to rotateat a speed proportional to the flow rate. Two opposing phototransistorsare mounted either side of the rotor and externallyof the clear sensor body, these generate a continuous signal.As the rotor spins each blade obscures the infra red signal.This is then converted into an industry standard pulse outputsignal – compatible with inexpensive display units for flow rate,totalising, batch control and large, central control systems.The lightweight Grilamid body with its virtually unrestricted flowpath, offers negligible pressure drop for flows up to 25 I/minand withstanding pressures up to 20 bar.Flow Rate • Totalising • Batch Control and applicationsin many industriesDataflow Compact Transmitters are small and very robusthaving been developed and tested extensively in industryapplications where space is a restriction. Dataflow Compactwith its Grilamid body and BSP connections can be installedalmost anywhere and once installed will give accurate andreliable output signalling.34.0ISO 228G 3 /88.0 TYP3.520.052.0Ordering InformationStandard products tableProduct number SupersedesDFC9000100 DFC.9000.100DescriptionDataflow compact flow transmitterNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.415Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Flowline - Oil and Water CalibratedFlowmeters (Brass Version)FlowmetersFeatures & BenefitsWorks in any plane.Pressure up to 350 bar (5000 psi).Flows up to 360 l/min.Accuracy ±5% FSD.Repeatability ±1% FSD.Direct reading.Relatively insensitive to viscosity changes.Oil or water calibrated.Optional reed switch upgrade.SpecificationConstruction:Brass body to BS 2874 CZ114.Maximum working pressure:Up to 350 bar.Minimum working pressure:1 bar.Temperature range:Brass –20°C to +90°C.Calibration:Oil Specific gravity0.856 at 20°C.Water Specific gravity1.0 at 20°C.Ordering Information - OilStandard products tableBrass flowmeter for oilViscosity range:10 to 200 cSt (oil).Accuracy:±5% FSD.Repeatability:±1% FSD.Min. scale reading:10% FSD.Connections:BSP parallel threads.Wetted/non-wetted parts:Consult Parker for information.AB1/4”, 1 /2” and 3 /4” BSP thread options(1 1 /4” version on next page)DEØCØFNote: To add an electrically operated reed switch to your flowmeterplease order B26307Dimensions (mm)Product numberSupersedesPortsBSPFlow range (l/min)Maximumpressure (bar)A(A/F Hex)B(A/F Hex)CDEFWeight(kg)FM26122212FM26122312FM26222112FM26222212FM26322112FM26322212FM26122112FM26422112FM26422212FM26422312FM.26 122 212FM.26 122 312FM.26 222 112FM.26 222 212FM.26 322 112FM.26 322 212FM.26 122 112FM.26 422 112FM.26 422 212FM.26 422 312Ordering Information - Water1/41/41/21/23/43/41/41 1 /41 1 /41 1 /40.5 - 4.51-92-205-465-5510 - 1100.2 - 2.020 - 18030 - 27040 - 360350350350350350350350210210210323241415858322929383846462919193232434319123123165.5165.51901901237712.512.515157For intallation details for 1 1 /4 flowmeters see next page323246465858320.40.40.90.91.751.750.48.08.08.0Standard products tableBrass flowmeter for waterDimensions (mm)Product numberFM26222122FM26222222FM26322122FM26322222FM26122122FM26122222FM26122322FM26422122FM26422222FM26422322SupersedesFM.26 222 122FM.26 222 222FM.26 322 122FM.26 322 222FM.26 122 122FM.26 122 222FM.26 122 322FM.26 422 122FM.26 422 222FM.26 422 322PortsBSP1/21/23/43/41/41/41/41 1 /41 1 /41 1 /4Flow range (l/min)2-205-465-5510 - 1100.2 - 2.00.5 - 4.51-920 - 18030 - 27040 - 360Maximumpressure (bar)350350350350350350350210210210Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.A(A/F Hex)41415858323232B(A/F Hex)38384646292929C32324343191919D165.5165.5190190123123123E12.512.51515777For intallation details for 1 1 /4 flowmeters see next pageF46465858323232Weight(kg)0.90.91.751.750.40.40.48.08.08.0416Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Flowline - Oil and Water CalibratedFlowmeters (Stainless Steel)FlowmetersFeatures & BenefitsSpecificationConstruction:Stainless steel to BS 970 316S.Maximum working pressure:Up to 350 bar.Minimum working pressure:1 bar.Temperature range:–20°C to +105°C.Calibration:Oil Specific gravity0.856 at 20°C.Water Specific gravity1.0 at 20°C.Ordering Information - OilStandard products tableStainless steel flowmeter for oilViscosity range:10 to 200 cSt (oil).Accuracy:±5% FSD.Repeatability:±1% FSD.Min. scale reading:10% FSD.Connections:BSP parallel threads.For flow measurement of corrosive or chemical media orin harsh locations.Manufactured in stainless steel 316.Works in any plane.Pressure up to 350 bar (5000 psi).Flows up to 360 l/min.Accuracy ±5% FSD.Repeatability ±1% FSD.Direct reading.Oil or water calibrated.Optional reed switch upgrade.Ø87Ø7565 A/F308251.532.5 5725 25Wetted parts:Body, thread adaptorPiston, etc: cone locknut:Stainless Steel.Flow cone:BS 970 316S 16.65 A/F1 1 /4” BSP option( 1 /4”, 1 /2” and 3 /4” onprevious page)Ø76Ø101.3Magnet encapsulation:Stainless steel BS970/1:1991.:316S31.Spring:Stainless steel to BS 2056 EN 58J.Seal:Fluoroelastomer.Note: To add an electrically operated reed switch to your flowmeter pleaseorder B26307Dimensions (mm)Product numberSupersedesPortsBSPFlow range (l/min)Maximumpressure (bar)A(A/F Hex)B(A/F Hex)CDEFWeight(kg)FM26232112FM26332112FM26332212FM26132112FM26132212FM26132312FM26232212FM26432112FM26432212FM26432312FM.26 232 112FM.26 332 112FM.26 332 212FM.26 132 112FM.26 132 212FM.26 132 312FM.26 232 212FM.26 432 112FM.26 432 212FM.26 432 312Ordering Information - Water1/23/43/41/41/41/41/21 1 /41 1 /41 1 /42-205-5510 - 1100.2 - 2.00.5 - 4.51-95-4620 - 18030 - 27040 - 360350350350350350350350350350350415858323232413846462929293832434319191932165.5190190123123123165.512.5151577712.5For intallation details for 1 1 /4 flowmeters see above465858323232460.91.751.750.40.40.40.98.08.08.0Standard products tableStainless steel flowmeter for waterDimensions (mm)Product numberFM26132122FM26132222FM26132322FM26232122FM26232222FM26332122FM26332222FM26432122FM26432222FM26432322SupersedesFM.26 132 122FM.26 132 222FM.26 132 322FM.26 232 122FM.26 232 222FM.26 332 122FM.26 332 222FM.26 432 122FM.26 432 222FM.26 432 322PortsBSP1/41/41/41/21/23/43/41 1 /41 1 /41 1 /4Flow range (l/min)0.2 - 2.00.5 - 4.51-92-205-465-5510 - 11020 - 18030 - 27040 - 360Maximumpressure (bar)350350350350350350350350350350Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.417A(A/F Hex)32323241415858B(A/F Hex)2929293838464619191932324343D123123123165.5165.519019077712.512.51515For intallation details for 1 1 /4 flowmeters see aboveParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.F323232464658580.40.40.40.90.91.751.758.08.08.0
Flowline - FlowswitchesFlowmetersFeatures & Benefits‘Boxed’ two-switch type.Intrinsically safe versions (supplied complete with flowmeter).Maximum/minimum switching models.Maximum working pressure 350 bar. (min 1 bar)Flows from 2.0 to 110 I/min.Stainless steel – suitable for corrosive fluids.Stainless steel to BS970 316516.Ordering InformationTo order the required switching unit, simply add the appropriate prefix before the part numbers shown below.Standard products tableProduct numberSupersedesDescriptionSwitch Range (Typical)FS643222112FS643222212FS643322112FS643322212FS.643 222 112FS.643 222 212FS.643 322 112FS.643 322 2122 switches, 2-20l/min ( 1 /2 BSP) Oil2 switches, 5-46l/min ( 1 /2 BSP) Oil2 switches, 5-55l/min ( 3 /4 BSP) Oil2 switches, 10 - 110 l/min ( 3 /4 BSP) Oil2 -12 l/min and 10-20 l/min6-24 l/m and 20-46 l/m5-30 l/min and 30-55 l/min10-50 l/min and 50-110 l/minProduct configuratorBrass flowswitch for oil or waterFS643FS67AFS67BFS67CProduct number2 switchesIntrinsically safe high switchIntrinsically safe low switchIntrinsically safe hi/low switch2221222232213222Flow range and (port size)2 - 20 l/min ( 1 /2 BSP)5 - 46 l/min ( 1 /2 BSP)5 - 55 l/min ( 3 /4 BSP)10 - 110 l/min ( 3 /4 BSP)1222Fluid typeOilWaterSwitch Range (Typical)2 -12 l/min and 10-20 l/min20-24 l/m5-30 l/min10-50 l/min and 50-110 l/minProduct configuratorStainless steel flowswitch for oil or waterFS643FS67AFS67BFS67CProduct number2 switchesIntrinsically safe high switchIntrinsically safe low switchIntrinsically safe hi/low switch2321232233213322Flow range and (port size)2 - 20 l/min ( 1 /2 BSP)5 - 46 l/min ( 1 /2 BSP)5 - 55 l/min ( 3 /4 BSP)10 - 110 l/min ( 3 /4 BSP)1222Fluid typeOilWaterSwitch Range (Typical)2 -12 l/min and 10-20 l/min24-46 l/m5-30 l/min10-50 l/min and 50-110 l/minOrdering exampleProduct numberSupersedesFS643332212FS.643 332 212Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.418Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
<strong>Hydraulic</strong> Test EquipmentFlowmetersFeatures & BenefitsSpeedy diagnosis of hydraulic circuit faults.Flows ranging from 2 to 360 l/min.Measuring flow, pressure and temperature.Fully Portable – No power source required.Hydrotrac unit for flows from 2 to 110 I/min available.Designed for oil applications only.SpecificationTroubleshooting Test UnitsFlow range:2 to 360 I/min.Pressure range:1 to 350 bar.Temperature range:0°C to +90°C.Installation DetailsA A/F HEXSafetyAn axial flow restrictor valve is fitted which can be adjustedunder full load from open to fully closed 1 , and to completethe specification, a safety blow-out disc, set to fail at 455 baris fitted to the manifold in a position facing away from theoperator when reading the gauges normally. Two spare blowoutdiscs are supplied which are easily replaced by removingthe hexagonal plug on the gauge manifold.Additional blow out discs can be ordered - 41203B (Bag of 10)Ordering InformationStandard products tableProduct number Flow range (I/min)412141204123416841694170Part number41203BB10 - 1105-552 - 11020 - 18030 - 27040 - 360Supersedes4120.3.BWeight Kg(with case) A7.4467.44611.84613.857513.857513.8575DescriptionSafety blow out discs x 10ØCDimensions (mm)B350350350496496496Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Note 3: 4123 ‘Hydrotrac’ unit features 2 flowmeters (2 - 20 and 10 - 110 l/min) and 1 pressure gauge and 1 thermometer.<strong>Hydraulic</strong> Test Units are designed specifically for the speedydiagnosis of hydraulic circuit faults in mobile, marine andindustrial systems using the normal range of mineral oils. Theirrugged construction based mainly on mild steel, manganesebronze and acrylic materials makes them ideally suited forarduous use in the field.Each unit is supplied in a convenient carrying case providingfull protection and additional storage space for fittings.Because they need no power source such as batteries etc,they are always ready for instant use.6 models are available to cover flow capacities up to 360 I/minand each incorporates a direct reading, uni-directional flowmeter. The meter, which is both self cleaning and reasonablytolerant of contaminated fluids is coupled to a manifold thathouses a glycerine-filled pressure gauge calibrated 0 to 350bar and a dial-type thermometer with a 0°C to 100°C range.Unit can only operate up to 90°C.For further convenience the scale on the flow meter can berotated to ensure visibility in any situation and the installedattitude of the assembly is not critical, though whenever possiblethe unit should be mounted with pressure gauge vertical andgauge case relief valve uppermost. The unit is designed for flowto be in the direction of the arrow on the flowmeter scale andmust not be installed with the flow reversed.1 Note: Permissable allowed seepage
Flow Products - For CompressedAir ApplicationsFlowmeters & MonitorsFeatures & BenefitsCBAAFlowline Flowswitches andFlowmetersCalibrated for direct readingof compressed air at 7 bar.Works in any plane.Brass or stainless steelmodels available in 4 sizes.Calibrated at 7 bar and 20°C.Flow ranges from 2 to 600 SCFM.Pressure 1-41 bar max.Optional reed switch upgrade.BCLoflow Air FlowmetersFlow measurement from 1.1 to720 l/min. Max 10 bar rating.Compressed Air TestEquipment6 models available – 1 /4”, 3 /4”and 1 1 /4” BSP.Air flow range 2 to 600 SCFM.Pressure 1-41 bar max.SpecificationDFull technical specifications for the Flowmeter,Flowswitch, LoFlow and test equipment products areprovided in the respective pages for these products.A A/F HEXØCOrdering InformationNote: To add an electrically operated reed switch to your flowmeterplease order B.26307Standard products tableStandard products table - LoFlowBrass flowmeter for airProduct numberFM26123332FM26223132FM26223232FM26323132FM26323232FM26423132FM26423232SupersedesFM.26 123 332FM.26 223 132FM.26 223 232FM.26 323 132FM.26 323 232FM.26 423 132FM.26 423 232PortsBSP1/41/21/23/43/41 1 /41 1 /4SCFM2-205-5010 - 11015 - 12520 - 22540 - 40060 - 600Flow rangel/sec1-102-255-506-6010 - 10020 - 20030 - 300Maximum workingpressure (bar)41414141412525ProductnumberLF801450LF802455LF802452LF802454LF801451LF802453SupersedesLF.3007ELF.3050ELF.3135ELF.3720ELF.3021ELF.3330EPorts (BSPT Flow rangemale)1/4 - 3 /4 1.1 - 8.0 l/min3/4 - 3 /4 10 - 50 l/min3/4 - 3 /4 20 - 135 l/min3/4 - 3 /4 2 - 12 l/sec1/4 - 3 /4 4 - 22 l/min3/4 - 3 /4 1.0 - 5.5 l/secFloatmaterialAcetalAcetalAcetalS/SteelS/SteelS/SteelStandard products tableStainless steel flowmeter for airFlow rangeProduct numberSupersedesPortsBSPSCFMl/secMaximum workingpressure (bar)FM26133332FM26233132FM26233232FM26333132FM26333232FM26433132FM26433232FM.26 133 332FM.26 233 132FM.26 233 232FM.26 333 132FM.26 333 232FM.26 433 132FM.26 433 2321/41/21/23/43/41 1 /41 1 /42-205-5010 - 11015 - 12520 - 22540 - 40060 - 6001-102-255-506-6010 - 10020 - 20030 - 30041414141414141Product configuratorOrdering exampleBrass flowswitch for airProduct numberSupersedesProduct numberFlow range SCFM and (l/sec)Ports (BSP)Fluid typeFS643323232FS.643 323 232FS643FS67AFS67B2 switchesIntrinsically safe high switchIntrinsically safe low switch22312232323132325-50(2-25)10 - 110 (5 - 50)15 - 125 (6 - 60)20 - 225 (10 - 100)1/21/23/43/432 AirNote 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.420Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Guide toContamination ControlUnderstanding and Answering the Threatof ContaminationReduce downtimewith effectivecontaminationmonitoringUnderstanding andanswering the threat ofcontaminationUnderstanding the significance thatsolid and liquid contamination canplay in undermining the efficiencyand effectiveness of hydraulic oils isa complex subject but one that hassome basic components and solutionsas to how to monitor, measure andultimately remove any particulate froma system. Parker Filtration can offermany years of experience on thissubject.Contact Information:Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong><strong>Europe</strong>an ProductInformation CentreFreephone: 00800 27 27 5374(from AT, BE, CH, CZ, DE, EE, ES,FI, FR, IE, IT, PT, SE, SK, UK)filtrationinfo@parker.comProduct Features:• Examples and explanations of ISO contamination levels.• Solid contamination codes charted.• Condition monitoring equipment explained.• Degree of filtration overviewwww.parkerhfde.com421Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Guide to Contamination ControlUnderstanding and Answering the Threat of ContaminationThe Threat of ContaminationIndustry requirements with regard to hydraulic and oillubrication systems emphasise reliability, long lifetime andreduced energy use. Depending on the circumstances,some 70 - 80% of system failures are due to contamination.Cleanliness monitoring is essential in contamination control,as is selecting the right filter components. The first step,however, is understanding the specific system requirementsand local operating conditions.This guide to contamination control describes:- Types of failures- Sources of contamination- Fluid cleanliness level- Condition monitoring equipment- Cleanliness service- Filtration: parameters and facts- <strong>Filter</strong> selection and filter typesTypes of FailuresComponent failure is often an invisible process. In generalthree types of failure can be distinguished:1. Catastrophic FailuresThis failure occurs suddenly and without warning; it is of apermanent nature. It is often caused by larger sized particlesentering a component and obstructing the relative movementbetween surfaces, resulting in seizure of the component.2. Transient FailuresGenerally speaking, this type of failure is short-lived and goesunnoticed, although the consequences rarely do. It is causedby particles that momentarily interfere with the function ofa component. The particles lodge in a critical clearancebetween matching parts, only to be washed away during thenext operation cycle. As a result, components become lesspredictable and thus unsafe.3. Degradation FailuresGradual deterioration in the performance of a componentresults in its eventual repair or replacement. This failure iscaused by the effect of wear induced by contamination.Additional generated contamination can lead to a catastrophicfailure. Failures or reduced system performance have a directimpact on the cost of ownership, the efficiency rate and theperceived quality perception of the end users.422Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Sources of ContaminationFinding the balanceWhat does it take to implement system-matched filtration?A review of the sources of contamination is the first step infinding the balance between the performance of the filtrationsystem and the system demands.Built-in ContaminationNatural ContaminationIngressed ContaminationGeneratedCatalyticContaminationEffectFAILURESources of ContaminationSeveral sources of contamination must be taken into accountwhen it comes to the effective implementation of systemmatchedfiltration. Without adequate filtration, the protection ofthe system is jeopardised and component or system failure isimminent. System-matched filtration changes the deteriorationinto a balanced situation, representing the continuouslycontrolled process that is needed to achieve system reliability.Realising this is only possible when the required fluidcleanliness levels are maintained.1. Built-in ContaminationResidual contamination from the manufacturing and assemblyprocesses cannot be avoided. Examples are machiningdebris, weld spatters, casting sand, paint, pipe sealant orfibres from cleaning rags. Flushing system components priorto assembly and decent housekeeping during the variousstages of the assembly process are a must to reduce theamount of built-in contamination.<strong>Filter</strong> media pleating2. Natural ContaminationIn general, the cleanliness level of new oil does not alwaysmeet the requirements of the system. Despite the effortsto control the fluid cleanliness level during the productionprocesses, transport and distribution may contaminate the oil.Depending on the requirements for system cleanliness, weadvise that you filter new oil before usage.3. Ingressed ContaminationSystems are always under attack from contamination.Unfortunately it is not possible to avoid ingressedcontamination. Air breathers, cylinder rod seals, wiper seals,component seals or poorly fitted covers are a few examplesof system parts that may have an important influence on theamount of ingressed contamination.4. Generated ContaminationParticles generate particles. This phenomenon is known asabrasion. Other processes like cavitation, corrosion, erosion,fatigue and metallic contact between moving parts generatesparticles and thus influences the contamination that is alreadypresent in the system. Even though these processes cannotalways be avoided, their impact is strongly influenced byeffective filtration.5. Catalytic EffectDuring the filter selection process, attention is generally givento the removal of solid, hard-type contamination only. Theperformance of hydraulic and lubrication fluids is influencedby the catalytic effect. As a result of the catalytic effect, thelifetime of the oil is significantly reduced.423Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Guide to Contamination ControlUnderstanding and Answering the Threat of ContaminationLifetime of OilSelecting the Right OilOils are selected based on their unique performance withregard to:a. Energy transferb. Corrosion protectionc. Cooling (transfer of heat)d. LubricationThe lifetime of oils is influenced by the amount of oxygen, oiltemperature, water content and presence of catalyser typeelements. The allowed water content varies for each type ofoil. Due to, for example, seal leakage or condensation, thewater content can easily reach concentrations far above theallowed water content value. The combination of water andwear elements like iron or copper causes a catalytic effect andas a result, reduces the lifetime of the oil. The lifetime of oil isalso influenced by the amount of generated static electrics.Lifetime ReductionThe lifetime reduction of oil is expressed by the degradationfactor. The influence of the catalytic effect of the degradationfactor is shown below.The Balance between System Requirements andFiltration System PerformanceParker’s philosophy exceeds the traditional approach ofprotecting the system by means of filtration.Built-in ContaminationNatural ContaminationIngressed ContaminationGenerated ContaminationCatalytic EffectSystem-matched filtration is not limited to a filter alone. Theprocess of system-matched filtration is based on the correctimplementation of suitable filtration products, taking intoaccount the requirements from the hydraulic or lubricationfluids, system components and customer expectations.Contamination ControlSource: Diagnetics Inc.Oil degradation can reduce the protection against corrosion and lubrication performance.Regular oil analysis is important to monitor the condition ofthe hydraulic or lubrication fluid. This analysis is also used toobtain information related to the process of selecting systemmatchedfilter components.Achieving the required system protection implicates a correctunderstanding of the system. Today filters are selected basedon several parameters like ß-values, pressure drop and dirtholding capacity.Filtration is built-in safety, meant to achieve and maintainthe required fluid cleanliness level during a defined period.This implicates a more detailed approach, which can only berealised when several filtration parameters are considered.Before FiltrationTanktopper II return line filter with integrated air breather and patented LEIF ® element424After FiltrationParker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Contamination & Cleanliness LevelSizes of Contamination<strong>Filter</strong>s are selected to capture contamination from hydraulicand lubrication fluids.Contamination is an invisible enemy. The human eyecannot see particles smaller than 40 micron. For the correctunderstanding a comparison is given below.Fluid Cleanliness LevelThe ISO 4406:1999 standard is an important code to definethe fluid cleanliness level using a solid contamination code.This ISO code is determined by allocating a first scale numberto the total number of particles larger than 4μm, allocatinga second scale number to all particles larger than 6μm andallocating a third scale number to the total number of particleslarger than 14μm.In the recent past, the fluid cleanliness level code wasdetermined using the ISO 4406:1987 standard. Instead ofcounting particles sizes 4, 6 and 14μm, the fluid cleanlinesslevel was determined by counting particles larger than 5 and15μm. The particle size 2μm was added later.As a result of upgrading the ISO standards, new particle sizeshave been defined. In general, the fluid cleanliness code willnot change as a result of this new standard. Built-up historicdata remains directly comparable to new data.100 micrometersGrain of salt70 micrometersDiameter of human hairISO 4406:1999 cleanliness classes40 micrometersLimit of visibility toFiltrationthe naked eyeof hydraulic and lubrication fluids will effectively stopparticles varying in size from millimetres to 1 micron.Component25 micrometersWhite blood cells8 micrometersRed blood cellsAnti-friction bearings 0.5MicronsVane pump (vane tip to other ring) 0.5 - 1Gear pump (gear to side plate) 0.5 - 5Servo valves (spool to sleeve) 1 - 4Hydrostatic bearings 1 - 25Piston pump (piston to bore) 5 - 40Servo valves flapper wall 18 - 63Actuators 50 - 2502 micrometersBacteriaServo valve orifice 130 - 450Number of particles per 100 millilitres greater than indicated sizeTypical hydraulic component clearances are given as an indication onlyParticle size, micrometers425Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Guide to Contamination ControlUnderstanding and Answering the Threat of ContaminationCleanliness LevelExamples of cleanliness level are given in the ISO graph.These lines represent:A. Low-pressure systems (code 21/20/17)B. Low-pressure control systems (code 19/18/14)C. Sophisticated pumps/motors control valves(code 18/17/13)D. Highly sophisticated systems and hydrostatictransmissions (code 16/15/11)E. Sensitive servo systems (code 15/14/10)F. High performance sensitive systems (code 12/11/8)We recommend verifying the required cleanliness level basedon the components used for the system. Manufacturers ofsystem components often provide information related to therequired fluid cleanliness level for their products.Condition Monitoring EquipmentOver the years, fluid condition monitoring has becomeincreasingly important. By offering system-matched filtrationsolutions, the stringent customer demands related toextended component lifetime or improved system reliabilitycan be met. Parker has developed a complete range ofinstruments and components for maintenance programmesand local fluid condition analysis such as the LaserCM below.Solid Contaminant CodesIn addition to ISO 4406: 1999, other standards are used toexpress the fluid cleanliness level. A comparison between thecodes is given below.ISO 4406: 1999 ISO 4406: 1987 N<strong>AS</strong> 1638 CL<strong>AS</strong>S13/11/8 11/8 214/12/9 12/9 315/13/10 13/10 416/14/9 14/9 -16/15/11 14/10 517/15/9 15/9 -17/15/10 15/10 -17/15/12 15/12 618/16/10 16/10 -18/16/11 16/11 -18/16/13 16/13 719/17/12 17/12 -19/17/14 17/14 820/18/12 18/12 -20/18/13 18/13 -20/18/15 18/15 921/19/13 19/13 -21/19/16 19/16 1022/20/13 20/13 -22/20/17 20/17 11Note:ISO 4406: 1987 is based on particle sizes larger than 5 and 15μmISO 4406: 1999 is based on particles sizes larger than 4, 6 and 14μmSeveral Cleanliness Levels16/14/10 18/17/12icountLaserCMParker’s particle counters are well known for their accurateperformance in the field or in a production line environment.Lightweight portable particle counters can be used fortemporary fluid cleanliness measurements.The MCM20, designed for permanent installation, is meant forcontinuous fluid monitoring. The compact MS100 and MS150moisture sensor together with the H2Oil means a completesolution is available to measure the water content in hydraulicor lubrication fluids.20/18/1422/21/16 24/23/18426Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Cleanliness ServiceCleanliness Service to Prevent FailuresAs Parker has no financial interest in the oil industry, thecompany can operate as an independent laboratory. Thedevelopment laboratory at Parker Filtration BV in Arnhem -the only laboratory of its kind in Belgium, the Netherlandsand Luxembourg - has at its disposal all the facilities for itsextensive R&Ddepartment. In addition, the services areoffered on a commercial basis to third parties.EquipmentThe laboratory uses state-of-the-art test equipment. Thecompany has invested in the latest Karl Fischer coulometricequipment, that prevents tests from being influenced by,among other things, additives in the oil. The particle-countingequipment is calibrated according to the recent ISO 11171standard. It is now possible to indicate the measuredcleanliness according to ISO 4406:1999.Standard TestThe high-quality standard test, carried out in Parker’slaboratory, consists of a water analysis and a cleanlinesscalculation according to ISO 4406, the new ISO 4406:1999and the N<strong>AS</strong> 1638 standard, as part of which particles from2 to 100μm are measured and reported. Membrane researchand digital photography of the membrane are also part ofthe standard test. The results of each test are described in areport that contains clear conclusions. It is also possible toconduct a spectral analysis.Filtration: Parameters and FactsGenerally speaking, fibre-type materials like cellulose and glassfibre are applied for hydraulic and lubrication fluid filtration.<strong>Filter</strong>s are selected based on the following parameters:- Required protection of system components- Location of filter(s) in the system- Flow rate and allowed pressure loss- Desired filter element life time- <strong>Hydraulic</strong> or lubrication fluid typeThe dirt holding capacity is the amount of solid contaminationa filter can hold before the filter material is plugged. This valueis measured in accordance to ISO 16889 using ISO MTDtest dust. The filter element lifetime strongly depends on thecontamination conditions that are present in the system andits environment.Predicting the filter element lifetime in the system iscomplicated, because of the variety in contamination (e.g.metal, sand and fibres, each with a certain distribution ofparticle sizes) in relation to the specified dirt holding capacity.Degree of FiltrationParker’s filtration philosophy is based on the optimumdistribution of several particle sizes by using the completethickness of glass fibre layers.Pre-layerIn PracticeHow do the laboratory services work? Only three days afterreceipt of the oil sample, the standard analysis is completed.The results of a spectral analysis are known after seven days.The reports can be sent directly and completely by e-mail.A free sample bottle is available upon request.Main layerEach selected filter layer has a unique performance for theremoval of solid contamination. System-matched filtrationimplicates the removal of harmful particles. For somesystems an improved removal efficiency for smaller sizedparticles is more important compared to other systems usingcomponents. The combination of pre- and main layers resultsin an achievable fluid cleanliness level. The complete packageof filter and support layers is indicated as pleat pack.427Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Guide to Contamination ControlUnderstanding and Answering the Threat of ContaminationDegree of FiltrationThe ß-value is used to express the removal efficiency for adefined particle size.The overall removal efficiency of the element forms the core offluid cleanliness levelsN particles upstream > ßx μmN particles downstream > ßx μmThe correct degree of filtration is chosen based on therequired fluid cleanliness level, not based on one ß-value.ßx(c) = N particles upstream >xμm/Nparticles downstream >xμmThe ISO 4572 standard formerly required only the ßx>75value. That standard has now been upgraded and replaced byISO 16889, reporting the ß-value of 2, 10, 75, 100, 200 and1000 for each filter medium or pleat pack. The correspondingefficiencies are given below.ß-value 2 10 75 100 200 1000Efficiency 50,00% 90,00% 98,67% 99,00% 99,50% 99,99%Taking into account a ß75(c)>10 element, the removalefficiency is 98.67% of particles larger than 10 micron.Too often filter elements are compared by looking at oneß-value only. The focus on high ß-values is misleading anddoes not always provide the required information.<strong>Filter</strong> <strong>Filter</strong>Comparison ß-value element I element IIBeta-value ß-75(c)>10 ß-200(c)>10Number of particles at upstream of filter >10 micron 5,000,000 5,000,000Removal efficiency 98,67% 99,50%Number of particles at downstream of filter >10 micron 66,500 25,000Statements that a ß200 filter improves the fluid cleanlinesslevel by a factor 2.6 (66,500/25,000) are misleading. Fluidcleanliness codes are based on several particle sizes. Moreinformation is needed to determine the overall removalperformance of filter media.A comparison between two 10-micron filter medias.An indication of recommended fluid cleanliness levels isgiven in this table. It is common use in the industry thatmanufacturers of components prescribe required fluidcleanliness level for the reliable functioning of their products.ComponentsISO CodeServo control valves 16/14/11Proportional valves 17/15/12Valve & piston pumps/motors 18/16/13Directional & pressure control valves 18/16/13Gear pumps/motors 19/17/14Flow control valves 20/18/15Cylinders 20/18/15The ISO codes are indicative values only.<strong>Filter</strong> element (blue) I: ß10(c)>75, <strong>Filter</strong> element (red) II: ß10(c)>200<strong>Filter</strong> element II has a lower removal efficiency for smallersized particles. Smaller sized particles can easily flowin narrow tolerances areas. Smaller sized particles willaccelerate the amount of generated contamination,effecting the functionality of other system components andaccelerating oil degradation.<strong>Filter</strong> media composition428Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Flow Rate & Pressure LostFlow Rate and Allowable Pressure LostEach filter element is designed to handle a nominal flow rate.The allowed flow rate depends on fluid viscosity, degree offiltration, and the amount of pressure that is lost. Indirectly, therequired element lifetime is an important parameter. A largersized element with a more effective filter element area has apositive influence on the element lifetime.<strong>Filter</strong> Types and LocationsMedia Degree of filtration Upper range Lower rangeQ3 2 16/14/10 13/11/8Q3 5 18/16/13 17/15/9Q3 10 20/18/15 19/17/12Q3 20 22/20/17 21/19/13The given cleanliness levels are indicative values only, based on average values<strong>Filter</strong> elements are chosen based on their initial clean elementpressure drop. It is preferred to apply a ratio of at least threebetween element bypass settings and element initial pressuredrops.Life time diagramDepending on the filter type and corresponding location, ageneral pressure lost recommendation can be givenSuction Line: 0.03-0.05 barPressure Line: 1 barReturn Line: 0.3-0.5 barSuction Return <strong>Filter</strong>: 1 barComparing filter elements with different filter media basedon the initial clean element pressure drop does not give areliable indication of the element dirt holding capacity. In thisexample the filter media A has a higher initial pressure drop.However, during its lifetime the pressure lost is more constantcompared to media B. This results in a longer element lifetime.The difference in performance is caused by a more effectivedistribution of captured particles in media A.429Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Notes430Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Notes431Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Important Information!WARNING-USER RESPONSIBILITYFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN ORRELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.– This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provideproduct or system options for further investigation by users having technical expertise.– The user, through their own analysis and testing, is solely responsible for making the final selection of the system andcomponents and assuring that all performance, endurance, maintenance, safety and warning requirements of the applicationsare met.The user must analyse all aspects of the application, follow applicable industry standards, and follow the informationconcerning the product in the current product catalogue and in any other materials provided from Parker or its subsidiaries orauthorized distributors.– To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon dataor specifications provided by the user, the user is responsible for determining that such data and specifications are suitable andsufficient for all applications and reasonably foreseeable uses of the components or systems.The operation of the products described here in is subject to the operating and safety procedures details of which are availableupon request.Sales conditionsThe items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorizeddistributors. Any sale contract entered into by Parker will be governed by the provisions stated in Parker’s standard terms andconditions of sale (copy available upon request)432Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>FDHB500UK.
Parker’s Motion & Control TechnologiesAt Parker, we’re guided bya relentless drive to helpour customers become moreproductive and achievehigher levels of profitabilityby engineering the bestsystems for their requirements.It means looking atcustomer applications frommany angles to find newways to create value. Whateverthe motion and controltechnology need, Parker hasthe experience, breadth ofproduct and global reachto consistently deliver. Nocompany knows more aboutmotion and control technologythan Parker. For furtherinfo call 00800 27 27 5374.AEROSPACEKey Markets• Aircraft engines• Business & general aviation• Commercial transports• Land-based weapons systems• Military aircraft• Missiles & launch vehicles• Regional transports• Unmanned aerial vehiclesKey Products• Flight control systems& components• Fluid conveyance systems• Fluid metering delivery& atomization devices• Fuel systems & components• <strong>Hydraulic</strong> systems & components• Inert nitrogen generating systems• Pneumatic systems & components• Wheels & brakesCLIMATE CONTROLKey Markets• Agriculture• Air conditioning• Food, beverage & dairy• Life sciences & medical• Precision cooling• Processing• TransportationKey Products•CO 2 controls• Electronic controllers• <strong>Filter</strong> driers• Hand shut-off valves• Hose & fittings• Pressure regulating valves• Refrigerant distributors• Safety relief valves• Solenoid valves• Thermostatic expansion valvesELECTROMECHANICALKey Markets• Aerospace• Factory automation• Food & beverage• Life science & medical• Machine tools• Packaging machinery• Paper machinery• Plastics machinery & converting• Primary metals• Semiconductor & electronics• Textile• Wire & cableKey Products• AC/DC drives & systems• Electric actuators• Controllers• Gantry robots• Gearheads• Human machine interfaces• Industrial PCs• Inverters• Linear motors, slides and stages• Precision stages• Stepper motors• Servo motors, drives & controls• Structural extrusionsFILTRATIONKey Markets• Food & beverage• Industrial machinery• Life sciences• Marine• Mobile equipment• Oil & gas• Power generation• Process• TransportationKey Products• Analytical gas generators• Compressed air & gas filters• Condition monitoring• Engine air, fuel & oil filtration& systems• <strong>Hydraulic</strong>, lubrication &coolant filters• Process, chemical, water& microfiltration filters• Nitrogen, hydrogen & zeroair generatorsFLUID & G<strong>AS</strong> HANDLINGKey Markets• Aerospace• Agriculture• Bulk chemical handling• Construction machinery• Food & beverage• Fuel & gas delivery• Industrial machinery• Mobile• Oil & gas• Transportation• WeldingKey Products• Brass fittings & valves• Diagnostic equipment• Fluid conveyance systems• Industrial hose• PTFE & PFA hose, tubing &plastic fittings• Rubber & thermoplastic hose& couplings• Tube fittings & adapters• Quick disconnectsHYDRAULICSKey Markets• Aerospace• Aerial lift• Agriculture• Construction machinery• Forestry• Industrial machinery• Mining• Oil & gas• Power generation & energy• Truck hydraulicsKey Products• Diagnostic equipment• <strong>Hydraulic</strong> cylinders& accumulators• <strong>Hydraulic</strong> motors & pumps• <strong>Hydraulic</strong> systems• <strong>Hydraulic</strong> valves & controls• Power take-offs• Rubber & thermoplastic hose& couplings• Tube fittings & adapters• Quick disconnectsPNEUMATICSKey Markets• Aerospace• Conveyor & material handling• Factory automation• Food & beverage• Life science & medical• Machine tools• Packaging machinery• Transportation & automotiveKey Products• Air preparation• Compact cylinders• Field bus valve systems• Grippers• Guided cylinders• Manifolds• Miniature fluidics• Pneumatic accessories• Pneumatic actuators & grippers• Pneumatic valves and controls• Rodless cylinders• Rotary actuators• Tie rod cylinders• Vacuum generators, cups & sensorsPROCESS CONTROLKey Markets• Chemical & refining• Food, beverage & dairy• Medical & dental• Microelectronics• Oil & gas• Power generationKey Products• Analytical sample conditioningproducts & systems• Fluoropolymer chemical deliveryfittings, valves & pumps• High purity gas delivery fittings,valves & regulators• Instrumentation fittings, valves& regulators• Medium pressure fittings & valves• Process control manifoldsSEALING & SHIELDINGKey Markets• Aerospace• Chemical processing• Consumer• Energy, oil & gas• Fluid power• General industrial• Information technology• Life sciences• Military• Semiconductor• Telecommunications• TransportationKey Products• Dynamic seals• Elastomeric o-rings• EMI shielding• Extruded & precision-cut,fabricated elastomeric seals• Homogeneous & insertedelastomeric shapes• High temperature metal seals• Metal & plastic retainedcomposite seals• Thermal management
Parker WorldwideAE–UAE,DubaiTel: +971 4 8127100parker.me@parker.comAR – Argentina, Buenos AiresTel: +543327444129AT – Austria, Wiener NeustadtTel: +43(0)262223501900parker.austria@parker.comAT – Eastern <strong>Europe</strong>,Wiener NeustadtTel:+43(0)262223501900parker.easteurope@parker.comAU–Australia,Castle HillTel: +61 (0)2-9634 7777AZ–Azerbaijan,BakuTel: +994 50 2233 458parker.azerbaijan@parker.comBE/LU – Belgium, NivellesTel:+32(0)67280900parker.belgium@parker.comBR – Brazil, Cachoeirinha RSTel:+555134709144BY – Belarus, MinskTel: +375 17 209 9399parker.belarus@parker.comCA–Canada,Milton, OntarioTel: +1 905 693 3000CH – Switzerland, EtoyTel:+41(0)218210230parker.switzerland@parker.comCL–Chile,SantiagoTel:+5626231216CN – China, ShanghaiTel:+862128995000CZ – Czech Republic, KlecanyTel: +420 284 083 111parker.czechrepublic@parker.comDE – Germany, KaarstTel: +49 (0)2131 4016 0parker.germany@parker.comDK – Denmark, BallerupTel: +45 43 56 04 00parker.denmark@parker.comES – Spain, MadridTel: +34 902 330 001parker.spain@parker.comFI – Finland, VantaaTel:+358(0)207532500parker.finland@parker.comFR–France,Contamine s/ArveTel: +33 (0)4 50 25 80 25parker.france@parker.comGR – Greece, AthensTel:+302109336450parker.greece@parker.comHK – Hong KongTel: +852 2428 8008HU – Hungary, BudapestTel:+3612204155parker.hungary@parker.comIE – Ireland, DublinTel: +353 (0)1 466 6370parker.ireland@parker.comIN – India, MumbaiTel:+912265137081-85IT–Italy,Corsico (MI)Tel:+3902451921parker.italy@parker.comJP – Japan, TokyoTel:+(81)364083901KR – South Korea, SeoulTel:+8225590400KZ – Kazakhstan, AlmatyTel: +7 7272 505 800parker.easteurope@parker.comLV – Latvia, RigaTel:+37167452601parker.latvia@parker.comMX–Mexico,ApodacaTel:+528181566000MY – Malaysia, Shah AlamTel:+60378490800NL – The Netherlands,OldenzaalTel: +31 (0)541 585 000parker.nl@parker.comNO–Norway,SkiTel:+4764911000parker.norway@parker.comNZ–NewZealand,Mt WellingtonTel:+6495741744PL–Poland,WarsawTel:+48(0)225732400parker.poland@parker.comPT–Portugal,Leca da PalmeiraTel: +351 22 999 7360parker.portugal@parker.comRO–Romania,BucharestTel:+40212521382parker.romania@parker.comRU – Russia, MoscowTel: +7 495 645-2156parker.russia@parker.comSE–Sweden,SpångaTel:+46(0)859795000parker.sweden@parker.comSG – SingaporeTel:+6568876300SK–Slovakia,Banská BystricaTel: +421 484 162 252parker.slovakia@parker.comSL – Slovenia, Novo MestoTel:+38673376650parker.slovenia@parker.comTH – Thailand, BangkokTel: +662 717 8140TR–Turkey,IstanbulTel: +90 216 4997081parker.turkey@parker.comTW–Taiwan,TaipeiTel: +886 2 2298 8987UA – Ukraine, KievTel+380444942731parker.ukraine@parker.comUK–UnitedKingdom,WarwickTel:+44(0)1926317878parker.uk@parker.comUS–USA,ClevelandTel: +1 216 896 3000VE–Venezuela,CaracasTel:+582122385422ZA – South Africa,Kempton ParkTel:+27(0)119610700parker.southafrica@parker.com<strong>Europe</strong>an Product Information CentreFreephone:0080027275374(fromAT,BE,CH,CZ,DE,EE,ES,FI,FR,IE,IT,PT,SE,SK,UK)Fax:+441442458112US Product Information CentreFree phone: 1-800-27 27 537© 2008 Parker Hannifin Corporation. All rights reserved.Parker Hannifin<strong>Hydraulic</strong> <strong>Filter</strong> <strong>Division</strong> <strong>Europe</strong>Email: filtrationinfo@parker.comwww.parker.comwww.parkerhfde.comCatalogue: FDHB500UK 04/2010Your local authorized Parker distributor
Change language