Manual HAHSON SR8 PLUS - VTP UP

SR8-Plus Operation Manual73-100-810-I5.7 Manual / Quick OperationThe SR8-Plus is designed to perform dissolution testing using a series of dissolutionparameters stored in a protocol. Under certain conditions, it is desirable to have manualcontrol of the speed and temperature. Use [SET SPEED] and [SETTEMPERATURE] to manually adjust these parameters when a protocol is not running, orbefore starting the manual timer.5.8 Print OptionsThe Print Options Menu provides the user with the four choices described below. The menualso shows the status of the system printer.Figure 5-5: Print Options ScreenPrint StatusPressing [1] allows the user to print the current status (speed, temperature and elapsed time)at any time.Print Protocol1. Press [2] to select “Print Protocol”. The Select Protocol screen is displayed.2. Highlight the desired protocol and press [ENTER]. The protocol parameters are printed.3. When printing is complete, press [ESC].Print HeaderPress [3] to select “Print Header”. The title is printed.Print Last TestPress [4] to select “Print Last Test”. The test that was last completed is stored in the systembuffer; each time a test is started this buffer is over-written.Section 5 Operation and Programming – 29 –