Manual HAHSON SR8 PLUS - VTP UP

SR8-Plus Operation Manual73-100-810-I5.2 Indicator LightsPower OnHeater OnStand ByThis light indicates power is supplied to the system.This light indicates the system is heating the waterbath. Whenever thewaterbath target temperature is increased, this light remains illuminated. Asthe bath nears target temperature, the light begins turning on and off, with theon time diminishing to only a few seconds per minute to maintain temperatureonce the target temperature is reached.This light indicates the system is in stand-by mode. This light blinks wheneverthe wakeup alarm has been activated in the stand-by mode.Diagnostics An energized light indicates the system detects a fault, which is fatal to its use.Timer Alert An energized light indicates an alarm has been activated. This light turns offautomatically whenever the alarm is acknowledged.5.3 Screen IconsThese icons are located on many system screens. Their purposes are:ClockPrinterLock OpenPress to view the current revision for that setting.Press to print the current screen information.Indicates that the security system is enabled and that a manager is logged on.Lock Closed Indicates that the security system is enabled and that an operator is logged on.NOTE: If no locks appear on any of the screens, this is an indication that the security systemis turned off.Figure 5-1: Screen IconsSection 5 Operation and Programming – 25 –