Manual HAHSON SR8 PLUS - VTP UP

SR8-Plus Operation Manual73-100-810-I5.1 Keypad DescriptionKey Key Name Use5 Operation and ProgrammingRunSpeedThe first press of this key allows the user to select a storedprotocol. The second press of this key starts the selectedprotocol.This key allows the user to manually set the speed. Thiskey is not functional when a protocol is running.TemperatureEdit/View ProtocolPreferencesPrint OptionsThis key allows the user to manually set the temperatureand to view the Digital Temperature Probe screen (whenDigital Temperature Probes are installed).This key is used to select the parameters for a new protocol.This key is also used to edit/view the parameters of a storedprotocol. A password may be required to changeparameters.This key is used to access a series of options that aresecondary to the normal operation of the system. Theseinclude: contrast adjustment for the LCD display, heatershutdown option at the end of a test, validation andcalibration options, security and user options, diagnostics,and system configuration.This key is used to access print options. These include:print status, print protocol, print header and print last test.StopThis key is used to abort a test in progress. Press twice toabort test. If this key is pressed when there is no test inprogress, the system is placed in the standby mode.ClockHelpThis key is used to access the clock and alarm options.These include: clock options, preheat wakeup alarm,sampling alarm, user alarms, calibration alarm, alarmacknowledgment and start manual timer. This key is alsoused to access revision information when available.This key is used to access the help screens for the system.Section 5 Operation and Programming – 24 –