Valtek MaxFlo 3 Control Valve Technical Brochure - Flowserve ...

Flowserve CorporationFlow Control1350 N. Mt. Springs ParkwaySpringville, UT 84663USAPhone: 801 489 8611Fax: 801 489 3719Flowserve S.A.S.7 Avenue de la Libération deThiersB.P. 6063307 Thiers CedexFrancePhone: 33 (0) 4 73 80 42 66Fax: 33 (0) 4 73 80 14 24FCD VLENTB0052-01 – 01/11Printed in USA.To find your local Flowserve representative:For more information about Flowserve Corporation, visitwww.flowserve.com or call USA 1 800 225 6989Flowserve Pte Ltd.12 Tuas Avenue 20Singapore 638824SingaporePhone: 65 6868 4600Fax: 65 6862 4940Flowserve Australia Pty Ltd.14 Dalmore DriveScoresby, Victoria 3179AustraliaPhone: 61 7 32686866Fax: 61 7 32685466Flowserve Ltda.Rua Tocantins, 128São Caetano do Sul, SP 09580-130BrazilPhone: 55 11 2169 6300Fax: 55 11 2169 6313Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed toperform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used innumerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific dataand warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, andmaintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, andtrain its employees and contractors in the safe use of Flowserve products in connection with the specific application.While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be consideredcertified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding anymatter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information containedherein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of itsworldwide operations or offices.© 2010 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.flowserve.com