Valtek MaxFlo 3 Control Valve Technical Brochure - Flowserve ...

More documents

Recommendations

Info

0.97(24.69)MaxFlo 3 FCD VLENTB0052-01 – 01/114.00(101.60)Customer conduit ports½-14 NPT thread(M20 optional)Dimensions and SpecificationsLogix 3000MD Series High Performance Digital PositionerNOTE: Dimensions in inches (mm)Supply, Output 1 andOutput 2 ports¼-18 NPT thread5.92(150.24)10.63(269.92)Follower arm limitis ±45° from 4.05 positionshown, (102.74) maximum0.25(6.35)2.00(50.80)Supply, Output 1 andOutput 2 ports¼-18 NPT thread7.18(182.45)5.92(150.24)3.38(85.83)10.63(269.92)4.05(102.74)2.70(68.68)0.15(3.81)1.24(31.59)0.86(21.76)1.13(28.58)2.25(57.15)Square5.24(133.15)Drive3.38(85.83)1.24(31.59)0.86(21.76)0.97(24.69)0.75(19.05)7.18(182.45)4.00(101.60)Customer conduit ports½-14 NPT thread(M20 optional)1.00(25.40)0.97(24.69)Spool Valve Cover and VentLED IndicatorsMain CoverFollower arm limitis ±45° from positionshown, maximum4.00(101.60)0.25(6.35)2.00(50.80)Customer conduit ports½-14 NPT thread(M20 optional)Spool Valve Cover and VentLED IndicatorsCustomerInterfaceCoverDriver CoverMain CoverElectrical Specifications Logix 3200MDPower SupplyCompliance VoltageEffective ResistanceTwo-wire, 4-20 mA10.0 to 30.0 VDCFollower arm limitis ±45° from positionshown, maximum10.0 VDC @ 20 mA2.70(68.68)0.15(3.81)2.70(68.68)0.15(3.81)0.25(6.35)495 Ω @ 20 mA TypicalAdd 20 Ω when HART communication activeCommunications HART Protocol ITK 5,6Minimum OperatingCurrentMaximum Voltage3.6 mA without AO board3.7 mA with AO board30.0 VDCEnvironmental Conditions Logix 3200MDOperating Temperature RangeStandardLow1.00(25.40)2.00(50.80)0.75(19.05)-4° to 176°F(-20° to 80°C)-40° to 176°F(-40° to 80°C)1.00(25.40)1.13(28.58)0.75(19.05)Electrical Specifications Logix 3400MD2.25(57.15)Square1.13(28.58)Power SupplyIS5.24(133.15)2.25(57.15)Square5.24(133.15)Two-wire, 9-32 VDCFF compatibleFisco compliantDriver CoverCommunications FF Protocol ITK 4.6x, 5.0Operating CurrentMaximum Voltage23 mA36.0 VDCEnvironmental Conditions Logix 3400MDOperating TemperatureRangeTransport and StorageTemperature RangeOperating HumidityStandardCustomerInterfaceCover-40° to 176°F(-40° to 80°C)-40° to 176°F (-40° to 80°C)0 - 100% non-condensingNote: The air supply must conform to ISA Standard ISA 7.0.01 (a dew point at least 18degrees Fahrenheit below ambient temperature, particle size below five microns—one micronrecommended—and oil content not to exceed one part per million).14Transport and StorageTemperature RangeOperating Humidity-40° to 176°F (-40° to 80°C)0 - 100% non-condensingNote: The air supply must conform to ISA Standard ISA 7.0.01 (a dew point at least 18degrees Fahrenheit below ambient temperature, particle size below five microns—one micronrecommended—and oil content not to exceed one part per million).
MaxFlo 3 FCD VLENTB0052-01 – 01/11Table 23: MaxFlo 3 Pipe Mounting Orientation Codes3 - Air Action 4 - Pipe Configuration 5 - Actuator Orientation 6 - Shaft DirectionO Air-to-open - ATO L Left Hand Mounting T Top (Default) D Shaft Downstream (Default)C Air-to-close - ATC R Right Hand Mounting R Right U Shaft UpstreamD Flow Down L LeftU Flow Up B Bottom*P Supernova: ParallelX Supernova: Cross-PipeAT3 4 5 6* Not available on diaphragm actuatorsTable 24: MaxFlo 3 Mounting Orientations – Diaphragm ActuatorFlow-to-Open (Shaft Downstream)AIR-TO-CLOSE, FAIL OPEN CONFIGURATIONFlow-to-Close (Shaft Upstream)TOPTOPHORIZONTAL FLOWLEFTRIGHTAIR TO CLOSERIGHTTOPLEFTFLOWAIR TO CLOSEFLOWLEFTRIGHTAIR TO CLOSETOPFLOWRIGHTLEFTAIR TO CLOSEFLOWFLOWLEFT HAND PIPEMOUNTINGRIGHT HAND PIPEMOUNTINGFLOWTOPTOPAIR TO CLOSERIGHTAIR TO CLOSERIGHTFLOW DOWNVERTICAL FLOWLEFTFLOWTOPRIGHTAIR TO CLOSELEFTFLOWTOPRIGHTAIR TO CLOSEFLOW UP15LEFTLEFTflowserve.com
Page 5 and 6: MaxFlo 3 FCD VLENTB0052-01 - 01/11C
Page 7 and 8: MaxFlo 3 FCD VLENTB0052-01 - 01/11P
Page 9 and 10: MaxFlo 3 FCD VLENTB0052-01 - 01/11D
Page 11 and 12: MaxFlo 3 FCD VLENTB0052-01 - 01/11D
Page 13: MaxFlo 3 FCD VLENTB0052-01 - 01/11D
Page 17 and 18: MaxFlo 3 FCD VLENTB0052-01 - 01/11T
Page 19 and 20: MaxFlo 3 FCD VLENTB0052-01 - 01/111

Valtek MaxFlo 3 Control Valve Technical Brochure - Flowserve ...

Create successful ePaper yourself

Delete template?

Save as template?