G710B - Volvo Construction Equipment

VOLVO MOTOR GRADERG710BTANDEM DRIVE• Configuration: Articulated frame• Engine model: Volvo D7DGAE2• Maximum net engine output@1900 RPM (per SAE J1349):148 - 179 hp (110 - 133 kW)• Base weight: 33,400 lb (15 150 kg)• Blade down force:16,968 lb (7 697 kg)• Blade pull: 21,343 lb (9 681 kg)• 8400 fully sequential direct drive powershifttransmission• Choice of fully enclosed, ROPS cab in fullheight or low profile configuration, orROPS canopy• Moveable Blade Control System• Load sensing, Closed Center Hydraulic System• Fully adjustable control pedestal with loweffort hydraulic controls• Full front and rear frame sections designedfor attachment mounting• Engine cooling module with efficient, variablespeed, hydraulically driven cooling fan• Single lever “Smart Shifter” transmissioncontrol with gear memory feature• Hydraulically Boosted Dual CrossoverBraking System with reserve power assist• Heavy duty lock/unlock differential• Contronic Monitoring System for allmachine functions• Full range of front and rear mountedattachments• Equipped with the fuel efficient, long lifeVolvo engine that complies to the EPA Tier II,EU Stage II emission standards

Wheels & tires(Standard equipment)Tire size . . . . . . . . . . . . . . . . . . . . . . 13:00 x 24, G-2Ply rating (PR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Rim size . . . . . . . . . . 9.0" (229 mm) One piece rimBolt-on rims are interchangeable between frontand rear. Multiple piece rims available.Front axleType: Robotically welded steel truss, gussetedfor torsional strength, oscillates on a single3.15" (80 mm) diameter center pivot pin.Wheel lean. . . . . . . . . . . . . . . . . . . . . . . . . 18º R & LOscillation . . . . . . . . . . . . . . . . . . . 16º up and downGround clearance. . . . . . . . . . . . . . 23.5" (597 mm)A single 4" (102 mm) diameter wheel leancylinder with lock valve is standard equipment.Two 3" (76 mm) diameter wheel lean cylinderswith lock valve are available optionally.SteeringHydrostatic power front wheel steeringincorporating two steering cylinders. MeetsSAE J1511 OCT. 90 with optional secondarysteering.Minimum turning radius using front axle steering,articulation, wheel lean and unlocked differential. . . . . . . . . . . . . . . . . . . . . . . . . . . 25'5" (7 747 mm)Steering arc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72ºFrame articulation angle. . . . . . . . . . . . . . . . . . . . 22ºArticulation lock standard.

Load sensing hydraulicsClosed Center Hydraulic System senses loadrequirements and maintains system pressure350 psi (24 Bar) above the load pressure.System features industry standard controlarrangement complete with low effort,feathering type short throw levers located ona fully adjustable steering pedestal.System incorporates lock valves to preventcylinder drift under load in the followingcircuits: blade lift, moldboard tilt, circle shift,wheel lean, circle turn and articulation.Hydraulic system features include axial pistonpump, pressure and flow compensated,variable displacement with high output forsmooth multi-functioning.The pump drive shaft is equipped with PermaLube U joints.Maximum pressure . . . . . . . . . . 2,700 psi (186 Bar)Output 2200 RPM. . . . 0-75 U.S. gpm (0-284 lpm)Filtration . . . . . . . . . . . . . . . . 10 micron spin-on typeCapacitiesU.S.Gal. LitresFuel tank . . . . . . . . . . . . . . . .100.0 . . . . . . .378.5Transmission . . . . . . . . . . . . . 10.0 . . . . . . . .38.0Final drive . . . . . . . . . . . . . . . . . .6.0 . . . . . . . .23.0Tandems (each) . . . . . . . . . . . .26.4 . . . . . . .100.0Hydraulic oil tank . . . . . . . . . . .35.4 . . . . . . .134.0Coolant antifreeze protection to-58º F (-50º C) approx . . . . . . . .7.4 . . . . . . . .28.0Engine oil . . . . . . . . . . . . . . . . . .8.45 . . . . . . .32.0Attachments(Optional unless otherwise stated as standardequipment)“A” Frame. . . . . . . . . . . . . . . . . . . 700 lb (318 kg)SnowHydraulic Wing• high bench. . . . . . . . . . . . . . . 4,800 lb (2 177 kg)• low bench . . . . . . . . . . . . . . . 4,000 lb (1 814 kg)One Way Snow Plow . . . . . . . 2,350 lb (1 065 kg)“V” Snow Plow• 9' (2 743 mm). . . . . . . . . . . . 2,500 lb (1 134 kg)• 10' (3 042 mm) . . . . . . . . . . 2,650 lb (1 202 kg)EarthDozer Blade• 8' (2 438 mm). . . . . . . . . . . . 2,620 lb (1 188 kg)• 9' (2 743 mm). . . . . . . . . . . . 2,870 lb (1 302 kg)• 10' (3 048 mm) . . . . . . . . . . 3,120 lb (1 415 kg)Front Mounted Scarifier . . . . . . 1,780 lb (807 kg)Mid-mount Scarifier . . . . . . . . . 1,725 lb (782 kg)Push Block. . . . . . . . . . . . . . . . 1,125 lb (510 kg)Ripper/Scarifier, rear . . . . . . . . 2,880 lb (1 306 kg)Windrow Eliminator . . . . . . . . . 1,300 lb (590 kg)DimensionsA Overall length . . . . . . . . . . . . . . . 29'10" (9 093 mm)D Wheelbase . . . . . . . . . . . . . . . . . . 20'0" (6 096 mm)E Bladebase• ISO 7134 . . . . . . . . . . . . . . . . . . . 8'7" (2 616 mm)G Frame• Noseplate to Tailgate . . . . . . . . . 28'7" (8 700 mm)H Overall length• w/attachments - teeth up. . . . 36'10" (11 227 mm)• w/attachments - teeth down . . 37'2" (11 328 mm)B Overall width . . . . . . . . . . . . . . . . . . 8'2" (2 489 mm)C Overall height . . . . . . . . . . . . . . . . 11'1" (3 378 mm)• with LowProfile Cab . . . . . . . . . . . . . . . . . . 10'1" (3 073 mm)F Tread width . . . . . . . . . . . . . . . . . . 6'10" (2 083 mm)COVERALLHEIGHTE - BLADEBASED - WHEELBASEG - FRAMEA - OVERALL LENGTHH - OVERALL LENGTH W/ATTACHMENTS - TEETH UPF - TREAD WIDTHB - OVERALL WIDTH

STANDARD FEATURESOperator controlled, lock/unlock differential finaldrive4 wheel, crossover, dual braking system with reservepower assistPark brake with operator warning alarm andindicatorFully sequential, direct drive, powershift 8400transmission, with transmission guard13.5" (343 mm) diameter, 4 plate, full oil masterclutchMoveable Blade Control System for optimum blademobilityFull front and rear frame sections designed towithstand shock loading of attachmentsCircle drive counter-balance valve protects againstimpact damageHardened circle teeth cut on outside of circle formaximum leverage and minimum wearHardened circle drive pinions for maximum wearresistanceIsolation mounted cab, transmission and engine forreduced noise and vibrationAdjustable steering control pedestal with tilt headfor maximum operator comfortGauges include: coolant temperature, engine oilpressure, fuel, hourmeter, air cleaner serviceindicator, articulation angle indicator, multi-functionContronic Monitoring System with visual andaudible warningsLoad sensing, Closed Center Hydraulic System withshort throw, low effort control levers. Hydraulicallyoperated blade lift, circle turn, moldboard slideand tilt, circle shift, wheel lean functions andarticulationFeathering type controls for precise blade adjustmentsDeluxe, cloth covered, fully adjustable suspension seatwhen grader is equipped with an enclosed cab100 U.S. gallon (378.5 l) fuel tank capacityDURAMIDE wear strips on circle clamp plates andguide shoes prevent metal-to-metal contact formaximum service lifeHinged cooling module door for easy trash clean outBackup lightsBackup alarm with automatic volume levelsPainted high gloss Volvo yellow and grayLockable tool box with storage space for scarifiershanksEngine side panels complete with locksLeft and right outside rear view mirrorsInterior rear view mirrorExhaust aspirated air cleanerFront cab wiper and washer standard when graderis equipped with an enclosed cabVHP - variable horsepowerOPTIONAL EQUIPMENTAccumulators - blade lift (2). . . . . . . . . . . 122 55Air conditioner - 35,000 BTU• HFC-134a (non-CFC refrigerant) . . . . . 130 59Brush guards . . . . . . . . . . . . . . . . . . . . . . . 40 18Cab• Canopy shell with ROPS - deduct . . . (625) (284)• FOPS protection for ROPS cabs . . . . 220 100• Low Profile Cabwith ROPS - deduct . . . . . . . . . . . . . . (270) (122)Cab heater - 50,000 BTU with cabpressurizer and replaceable filter. . . . . . . 60 27Defroster fans . . . . . . . . . . . . . . . . . . . . . . . . 3 1Engine block heater . . . . . . . . . . . . . . . . . . . 3 1Engine precleaner - Turbo II . . . . . . . . . . . . . 6 3First user lifetime frame warranty . . . . . . . . . 0 0Float control, right and left detent styleindependent . . . . . . . . . . . . . . . . . . . . . . . 15 7Front attachment float control, detent style,independent of other float valves. . . . . . . 15 7Hydraulic tank heater . . . . . . . . . . . . . . . . . . 3 124 volt radio/cassette player . . . . . . . . . . . . 6 3Lights• Beacon (amber or blue) . . . . . . . . . . . . . . 10 4• Clearance lights front & rear . . . . . . . . . . . 2 1lb kg lb kg lb kg• Front mounted plow lights - 2• high mount. . . . . . . . . . . . . . . . . . . . . 120 54• low mount . . . . . . . . . . . . . . . . . . . . . 100 45• Headlights with dimmer switch . . . . . . . . . 0 0• Moldboards lights - 2 . . . . . . . . . . . . . . . . . 2 1• Rear flood lights - 2 . . . . . . . . . . . . . . . . . 2 1• Snow wing lights - 2 . . . . . . . . . . . . . . . . . 2 1Fenders• Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 36• Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 182Moldboards• 13' x 25" x 7/8"(3 962 x 635 x 22 mm) . . . . . . . . . . . . 110 50• 14' x 25" x 7/8"(4 267 x 635 x 22 mm) . . . . . . . . . . . . 219 99Moldboard extensionsR or L - 2' (610 mm) . . . . . . . . . . . . . . 190 86Moldboard edges - carbide 3/4" x 5"(19 x 127 mm) . . . . . . . . . . . . . . . . . . . . . . - -100 amp alternator . . . . . . . . . . . . . . . . . . . . 0 0Paint - custom colors. . . . . . . . . . . . . . . . . . . - -Polar protection . . . . . . . . . . . . . . . . . . . . . . 0 0Reflectors - side. . . . . . . . . . . . . . . . . . . . . . . - -Remote valve for attachments• 3 or 5 bank. . . . . . . . . . . . . . . . . . . . . . . . 85 39Sideshift accumulator. . . . . . . . . . . . . . . . . 50 23Second leaning wheel cylinder . . . . . . . . . 30 14Secondary steering (power assisted) . . . . 95 43Tie down brackets . . . . . . . . . . . . . . . . . . 100 45Tires• 14:00 x 24, 12 PR, G-2,10" (254 mm) rims . . . . . . . . . . . . . . . . 230 104• 17.5 x 25, 12 PR, L-2,14" (356 mm) rims . . . . . . . . . . . . . . . . 825 374Tool kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 16Transmission sump heater . . . . . . . . . . . . . . . - -Low ambient fluids. . . . . . . . . . . . . . . . . . . . . - -Vandalism protection . . . . . . . . . . . . . . . . . . 8 4Wheel weights front or rear - each . . . . . 250 113Window - opening - lower front. . . . . . . . . . . - -Window - opening sliders - left/right . . . . . . - -Wiper and washer - rear . . . . . . . . . . . . . . . . - -Wiper and washer - lower front . . . . . . . . . . - -Rear tailgate guard. . . . . . . . . . . . . . . . . . 200 90Intermittent wipers, front and rear . . . . . . . . . - -Your safety and the safety of those around you depends on using care and judgement when operating and servicing your grader.Do not operate the grader until you read and understand the warnings and instructions in the operator’s manual. Volvo MotorGraders Limited is an ISO 9001 and 14001 registered company. www.volvo.comUnder our policy of continuous product development and improvement, we reserve the right to change specifications and designwithout prior notice. The illustrations do not necessarily show the standard version of the machine.Consult your Volvo dealer for recommended option and attachment selection.Ref. No. 21 5 434 1002 EnglishPrinted in Canada 2004.04-3.5 GRDVolvo, Goderich