UCNP - Equinsa Networking

DatasheetUCNP S and E – S46998-A2-A4x / Feb. 2007Product Family:Product:Fibre:Evolant ® , ClosuresUniversal in-line closure for optical cables (UCNP), Standard (S) and Element (E)InfiniCor ® SX+ OM3, InfiniCor ® 600 OM2, InfiniCor ® 300 OM1, SMF-28e OS2ApplicationCorning Cable Systems’ universal closures family isdesigned to protect splices and store excess buffer tubelengths to fibre optic cables. In particular the UCNPversions offer the possibility of jointing in-line 5 to 8individual cables (in/out) depending on the closure size.The universal closures can be installed on cable withsheaths of all the common used materials, it is suitablefor direct buried, man- or hand-hole and aerialapplications as interconnection, branching, distribution oraccess point.DescriptionThe body of the closure constists of two mechanical endcaps(type UCNP) and a longitudinally split closure tube,all components are made of thermoplastic material,resistant against all common environmental influences.The tube is closed by means of two clamping bars (alsoof thermoplastic material) that can be affixed, and reopened,by using only a plastic hammer and are scuredwith pins. Each mechanical end-cap consist of two halveswith two cable entries in the middle for mid span accessof up to two cables.Permanent elastic seals (one longitudinal for the closuretube and two rings, one for each end-cap) allow theclosure to be tightly closed and re-entered without needof additional material. The two halves of each end-capare sealed by means of pre-cut sealing tape and thecable entries in the middle are sealed by means of asealing tape wrapped around the cables. The other cableentries, whose number and size varies depending on theclosure size, are intended for branching cables and aresealeable by means of compression fittings.In-line closure UCNP 7-10 EUCNP closed with clamping barsThe two end-caps incorporate the cable and centralmember strain relief. Each closure is delivered with allmaterials to seal and strain relieve two cables (2 in and 2out) through the mid-span access entries as well as onebranching cable.The two end caps are interconected by means of twometal bars which are protecting the closure fromlongitudinal compression and are used as support for thefibre management.Each closure is equipped with a feedthrough for externalgrounding or a valve for pressure tightness testing (flashtest).Standard splice tray with crimp spliceorganizerAll closure sizes are available with two different fibre management systems, which are included in the pack.The universal closure family includes also canister closures of different sizes and equipped with different fibremanagement systems (UCNCP).Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, GermanyTEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.comCorning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without priornotification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.

DatasheetUCNP S and E – S46998-A2-A4x / Feb. 2007Features / Benefits• Suitable for direct buried, man- or hand-hole and aerial installations.• For straight or branching applications.• Two cable entries per side can be used also for mid-span access (uncut buffer tubes).• Fast and easy re-entering and insertion of branching cables on demand, without need of special tools.• Different sizes and fibre management systems for a capacity up to 432 splices.• IP 68 rated.Specifications: fibre management and splice capacitiesFibre management Type Number of splice trays Max. splice capacityStandard (S)UCNP 5-10 S 6 standard (without cover) 72UCNP 7-10 S 12 standard (without cover) 144UCNP 7-20 S 24 standard (without cover) 288UCNP 9-20 S 36 standard (without cover) 432UCNP 7-10 E 8 standard (with cover) 96Element (E)UCNP 7-20 E 16 standard (with cover) 192UCNP 9-20 E 24 standard (with cover) 288Specifications: dimensions and cable entriesEnd-cap Type Outer Ø (mm) Length (mm) Number and outer diameter of cablesUCNP 5-10 S 150 3842 x12-20 mm (cut/uncut) each side3 x 5-15 mm (cut) each sideUCNP 7-10 S/E 204 384UCNP 7-20 S/E 204 7682 x12-22 mm (cut/uncut) each side4x 5-18 mm (cut) each sideUCNP 9-20 S/E 250 7682 x12-32 mm (cut/uncut) each side6 x 12-25 mm (cut) each sideCorning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, GermanyTEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.comCorning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without priornotification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.

DatasheetUCNP S and E – S46998-A2-A4x / Feb. 2007Kit contents:Each closure kit contains all parts for installation of a branching joint including the equipment for up to fivecables (up to four in the end-caps intersections and one in one branching port) and for fibre management.Application specific accessories such as splice trays and splice protectors have to be ordered separately.Closure1. Closure tube.2. End-cap.3. Connecting bars.4. Clamping bars.5. Dummy plugs for non used entries (in theend-caps intersections).6. Sealing rings.7. Sealing cord.8. Central member strain relief and centralmember / cable armour grounding.9. Closing screw.10. Grounding screws.11. Wrap gauge / wrench.12. Cleaning tissues.13. Sealing paste.14. Lubricant.15. Brush.16. Closing screws for end-caps.17. Cable clamps (worm drive).18. Double brackets (strain relief for 2 cables).19. Branching kit (see below).20. Sealing tape.21. Pre-cut sealing tape for end-caps.22. Installation instructions.23. Fibre management according to selected type (not shown).24. Shield connection lead (not shown).Kit contents: UCNPBranching kit for UCNP (different sizes)1. Silicon sealing rings (for UCNP 5-10 S only 2 rings).2. Pressure screw.3. Closing screw4. Lock washer.5. Cable clamp (worm drive).6. Single bracket (strain relief for 1 cables).7. Central member strain relief and central member / cablearmour grounding.Branching kit for UCNPAerial hanging device (to be ordered separately)1. Supports.2. Clamp screws.Aerial hanging device for UCNPCorning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, GermanyTEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.comCorning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without priornotification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.

DatasheetUCNP S and E – S46998-A2-A4x / Feb. 2007Ordering informationUCNP with standard fibre management (S)DescriptionUCNP 5-10 S for up to 72 splices. Withmaterial for 2 joint cables + 1 branchingcable.UCNP 7-10 S for up to 144 splices.With material for 2 joint cables + 1branching cable.Quantity per delivery unit 1/1 1/1Order number S46998-A2-A40 S46998-A2-A41DescriptionUCNP 7-20 S for up to 288 splices.With material for 2 joint cables + 1branching cable.UCNP 9-20 S for up to 432 splices.With material for 2 joint cables + 1branching cable.Quantity per delivery unit 1/1 1/1Order number S46998-A2-A42 S46998-A2-A43UCNP with element fibre management (E)DescriptionUCNP 7-10 E for up to 96splices. With material for 2joint cables + 1 branchingcable.UCNP 7-10 E for up to192 splices. With materialfor 2 joint cables + 1branching cable.UCNP 9-20 E for up to288 splices. With materialfor 2 joint cables + 1branching cable.Quantity per delivery unit 1/1 1/1 1/1Order number S46998-A2-A44 S46998-A2-A45 S46998-A2-A46Accessories:Part Number Description Quantity per delivery unitC46197-A7-A70 Standard splice tray for up to 2 splice organizers 2/1(max. 12 single fibres).C46197-A7-A66 Standard splice tray for up to 2 splice organizers. 10/1(max. 12 single fibres).S46998-A4-A1 Cover for standard splice tray. 10/1S46999-Z12-A1 Splice organizer for up to 6 heat-shrink splice protectors 10/1C46197-A7-A69 Splice organizer for up to 12 crimp splice protectors. 10/1S46999-A16-A7 Splice organizer for up to 4 ribbon heat-shrink splice protectors. 10/1S46998-A16-A4 Heat-shrink splice protectors, 60 mm long. 100/1S46998-A4-A29 Heat-shrink splice protectors, 45 mm long. 100/1S46998-A16-A8 Ribbon heat-shrink splice protectors, for ribbons up to 4 fibres. 5/1S46998-A16-A6 Ribbon heat-shrink splice protectors, for ribbons 4 to 12 fibres. 25/1CSP-1 Crimp splice protectors, 30 mm long. 150/1S46998-A2-R36 Branching set for UCNP 5: cable and central member strain relief 1/1and grounding for 1 cable 5-15 mm diameter.S46998-A2-R16 Branching set for UCNP 7: cable and central member strain relief 1/1and grounding for 1 cable 5-18 mm diameter.S46998-A2-R37 Branching set for UCNP 9: cable and central member strain relief 1/1and grounding for 1 cable 12-25 mm diameter.S45754-D1-A1 Aerial hanging device for UCNP (all sizes). 1/1C45402-Z3-C31 Valve for tightness test (flash-test). 1/1S45056-M130-A3 Desiccant 50 g bag. 1/1Corning Cable Systems GmbH & Co. KG · Rotherstrasse 21 · 10245 Berlin, GermanyTEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.comCorning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without priornotification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.Corning Cable Systems is ISO 9001 certified. © 2006 Corning Cable Systems. All rights reserved. Published in the EU.