Installation and Commissioning

Troubleshooting ToolsMONITOR MODE 2if you proceed, system data willbe lost! Press any key on the PC to accept.6. Then enter the password: ROBSERV.When the password has been entered (see above), a menu will be displayed, as shownbelow:Welcome to Monitor Mode 21. Memory IO (Tests the memory)2. Serial IO (Tests the serial channels)3. Elementary IO (Tests the IO units) Not yet implemented4. DSQC 3xx (IOC) (Tests the IO computer)5. DSQC 3xx (AXC) (Tests the axes computer)6. DSQC 3xx (MC, ERWM) (Tests the main computer and external memoryboards)7. System tests (MISC) (System-related tests)8. Auxiliary (Special tests) Not yet implemented9. Specific test (Specific tests that can be run separately)10. T1060 IOC System resetSelect test group and the test group menu will be displayed.1. T9901 Memory IO1. Up one level2. FLOPPY1. Up one level2. T1039 IOC Floppy Format Test3. T1040 IOC Floppy Write/Read Test3. IOC RWM1. Up one level2. T1516 TIOC RWM size3. T1005 IOC Memory test (RWM) Non destructive4. AXC RWM1. Up one level2. T1067 IOC->AXC Memory test (RWM)3. T1068 IOC->AXC Memory test (RWM) R6 Global4. T1069 IOC->AXC Memory test (RWM) DSP5. T3001 AXC RWM test Destr6. T3002 AXC R6 Global RWM test7. T3003 AXC DSP Double access RWM test8. T3004 AXC DSP Data RWM test8 Product Manual