Installation and Commissioning

Connecting SignalsInstallation and CommissioningX3X4Unit function Signal name Pin Customer conn. Signal name PinOpto.isol.In ch 1 1 24 V In ch 9 1In ch 2 2 In ch 10 2In ch 3 3 In ch 11 3In ch 4 4 In ch 12 4In ch 5 5 In ch 13 5In ch 6 6 In ch 14 6In ch 7 7 In ch 15 7In ch 8 8 In ch 16 80V for in 1-8 9 0 V 0V for in 9-16 9Not used 10 Not used 10NOTE!The input current is 5.5 mA (at 24V) on the digital inputs. A capacitor connected toground, to prevent disturbances, causes a short rush of current when setting the input.When connecting outputs, sensitive to pre-oscillation current, a serial resistor (100 Ω)may be used.X6Signal name Pin ExplanationAN_ICH1 1 For test purpose onlyAN_ICH2 2 For test purpose only0V 3 0V for In 1-20VA 4 0V for Out 1-2AN_OCH1 5 Out ch 1AN_OCH2 6 Out ch 258 Product Manual IRB 1400