RS-1000 Manual - kamery airlive airlivecam
RS-1000 Manual - kamery airlive airlivecam RS-1000 Manual - kamery airlive airlivecam
AdminOn the left hand menu, click on Setup, and then select Admin below it. The current list ofAdministrator(s) shows up.!!Figure1-1Settings of the Administration tableAdministrator Name: The username of Administrators for the Security Bandwidth Manager.The user admin cannot be removed.Privilege: The privileges of Administrators (Admin or Sub Admin)The username of the main Administrator is Administrator with read / write privilege.Sub Admins may be created by the Admin by clicking New Sub Admin. Sub Adminshave read only privilege.Configure: Click Modify to change the “Sub Administrator’s” password and click Removeto delete a “Sub Administrator.”3
Changing the Main/Sub-Administrator’s PasswordStep 1. The Modify Administrator Password window will appear. Enter in the requiredinformation:" Password: enter original password." New Password: enter new password" Confirm Password: enter the new password again.Step 2. Click OK to confirm password change or click Cancel to cancel it.Figure1-24
- Page 1 and 2: AirLive RS-1000Security Bandwidth M
- Page 3 and 4: Software Update43Interface 44Addres
- Page 5 and 6: Event Alarm151Accounting Report 154
- Page 7: Multiple NAT Multiple NAT allows lo
- Page 11 and 12: Removing a Sub AdministratorStep 1.
- Page 13 and 14: Exporting Security Bandwidth Manage
- Page 15 and 16: Restoring Factory Default SettingsS
- Page 17 and 18: Web Manager (WAN Interface) (Remote
- Page 19 and 20: To-Bandwidth Manager Packets LogOnc
- Page 21 and 22: Date/TimeSynchronizing the Bandwidt
- Page 23 and 24: Permitted IPsOnly the authorized IP
- Page 25 and 26: Modify Permitted IP AddressStep 1.
- Page 27 and 28: Multiple NATMultiple NAT allows loc
- Page 29 and 30: Add Multiple NATStep 1. Click the A
- Page 31 and 32: Delete Multiple NATStep 1. Find the
- Page 33 and 34: " Detect ICMP Flood: Select this op
- Page 35 and 36: Route TableIn this section, the Adm
- Page 37 and 38: Modifying a Static Route:Step 1. In
- Page 39 and 40: DHCPIn the section, the Administrat
- Page 41 and 42: Adding a new Host TableSTEP 1.Selec
- Page 43 and 44: How to register:Firstly, Click Dyna
- Page 45 and 46: Modify dynamic DNSStep 1. Find the
- Page 47 and 48: LogoutStep 1. Select this option to
- Page 49 and 50: InterfaceIn this section, the Admin
- Page 51 and 52: !!46
- Page 53 and 54: 48Fixed: Select this if you were gi
- Page 55 and 56: 50After setting all of the paramete
- Page 57 and 58: 52If you want to set up DNS Server,
AdminOn the left hand menu, click on Setup, and then select Admin below it. The current list ofAdministrator(s) shows up.!!Figure1-1Settings of the Administration tableAdministrator Name: The username of Administrators for the Security Bandwidth Manager.The user admin cannot be removed.Privilege: The privileges of Administrators (Admin or Sub Admin)The username of the main Administrator is Administrator with read / write privilege.Sub Admins may be created by the Admin by clicking New Sub Admin. Sub Adminshave read only privilege.Configure: Click Modify to change the “Sub Administrator’s” password and click Removeto delete a “Sub Administrator.”3