RS-1000 Manual - kamery airlive airlivecam
RS-1000 Manual - kamery airlive airlivecam RS-1000 Manual - kamery airlive airlivecam
LANEntering the LAN windowStep 1. Click LAN under the Address menu to enter the LAN window. The current settinginformation such as the name of the LAN network, IP and Netmask addresses willshow on the screen.!!Figure3-1 LANDefinitionName: Name of LAN network address.IP:IP address of LAN networkNetmask: Netmask of LAN network.MAC Address: MAC address corresponded with LAN IP address.Configure: You can configure the settings in LAN network. Click Modify to change theparameters in LAN network. Click Remove to delete the settings.In the LAN window, if one of the members has been added to Policy or LAN Group, theConfigure column will show the message – In Use. In this case, you are not allowed tomodify or remove the setting.55
Adding a new LAN AddressStep 1. In the LAN window, click the New Entry button.Step 2. In the Add New Address window, enter the settings of a new LAN networkaddress.Step 3. Click OK to add the specified LAN network or click Cancel to cancel the changes.Figure3-2 Add New IP Address in LANIf you want to enable Add in Static DHCP function, enter the MAC Address then check theAdd in Static DHCP.56
- Page 9 and 10: Changing the Main/Sub-Administrator
- Page 11 and 12: Removing a Sub AdministratorStep 1.
- Page 13 and 14: Exporting Security Bandwidth Manage
- Page 15 and 16: Restoring Factory Default SettingsS
- Page 17 and 18: Web Manager (WAN Interface) (Remote
- Page 19 and 20: To-Bandwidth Manager Packets LogOnc
- Page 21 and 22: Date/TimeSynchronizing the Bandwidt
- Page 23 and 24: Permitted IPsOnly the authorized IP
- Page 25 and 26: Modify Permitted IP AddressStep 1.
- Page 27 and 28: Multiple NATMultiple NAT allows loc
- Page 29 and 30: Add Multiple NATStep 1. Click the A
- Page 31 and 32: Delete Multiple NATStep 1. Find the
- Page 33 and 34: " Detect ICMP Flood: Select this op
- Page 35 and 36: Route TableIn this section, the Adm
- Page 37 and 38: Modifying a Static Route:Step 1. In
- Page 39 and 40: DHCPIn the section, the Administrat
- Page 41 and 42: Adding a new Host TableSTEP 1.Selec
- Page 43 and 44: How to register:Firstly, Click Dyna
- Page 45 and 46: Modify dynamic DNSStep 1. Find the
- Page 47 and 48: LogoutStep 1. Select this option to
- Page 49 and 50: InterfaceIn this section, the Admin
- Page 51 and 52: !!46
- Page 53 and 54: 48Fixed: Select this if you were gi
- Page 55 and 56: 50After setting all of the paramete
- Page 57 and 58: 52If you want to set up DNS Server,
- Page 59: AddressThe Security Bandwidth Manag
- Page 63 and 64: Removing a LAN AddressStep 1. In th
- Page 65 and 66: Adding a LAN GroupStep 1. In the LA
- Page 67 and 68: Removing a LAN GroupStep 1. In the
- Page 69 and 70: Adding a new WAN AddressStep 1. In
- Page 71 and 72: Removing an WAN AddressStep 1. In t
- Page 73 and 74: Adding an WAN GroupStep 1. In the W
- Page 75 and 76: Removing a WAN GroupStep 1. In the
- Page 77 and 78: Pre-definedEntering a Pre-defined w
- Page 79 and 80: 74Use” message will appear in the
- Page 81 and 82: Modifying Custom ServicesStep 1. A
- Page 83 and 84: GroupAccessing the Group windowStep
- Page 85 and 86: Modifying Service GroupsStep 1. In
- Page 87 and 88: 82ScheduleThe Security Bandwidth Ma
- Page 89 and 90: Adding a new ScheduleStep 1. Click
- Page 91 and 92: Removing a ScheduleStep 1. In the S
- Page 93 and 94: 88Configuration of QoSClick QoS in
- Page 95 and 96: 90Modify QoSStep 1. Click QoS in th
- Page 97 and 98: 92AuthenticationBy configuring the
- Page 99 and 100: STEP 2.Enter the following setting
- Page 101 and 102: STEP 4.When user_1 is going to acce
- Page 103 and 104: OutgoingThis section describes step
- Page 105 and 106: 100Adding a new Outgoing PolicyClic
- Page 107 and 108: 102Modifying an Outgoing policyStep
- Page 109 and 110: Removing the Outgoing PolicyStep 1.
LANEntering the LAN windowStep 1. Click LAN under the Address menu to enter the LAN window. The current settinginformation such as the name of the LAN network, IP and Netmask addresses willshow on the screen.!!Figure3-1 LANDefinitionName: Name of LAN network address.IP:IP address of LAN networkNetmask: Netmask of LAN network.MAC Address: MAC address corresponded with LAN IP address.Configure: You can configure the settings in LAN network. Click Modify to change theparameters in LAN network. Click Remove to delete the settings.In the LAN window, if one of the members has been added to Policy or LAN Group, theConfigure column will show the message – In Use. In this case, you are not allowed tomodify or remove the setting.55