RS-1000 Manual - kamery airlive airlivecam

AddressThe Security Bandwidth Manager allows the Administrator to set Interface addresses of theLAN network, LAN network group, WAN network, WAN group.What is the Address Table?An IP address in the Address Table can be an address of a computer or a sub network. TheAdministrator can assign an easily recognized name to an IP address. Based on the networkit belongs to, an IP address can be an LAN IP address, WAN IP address . If the Administratorneeds to create a control policy for packets of different IP addresses, he can first add a newgroup in the LAN Network Group or the WAN Network Group and assign those IPaddresses into the newly created group. Using group addresses can greatly simplify theprocess of building control policies.With easily recognized names of IP addresses and names of address groups shown in theaddress table, the Administrator can use these names as the source address or destinationaddress of control policies. The address table should be built before creating control policies,so that the Administrator can pick the names of correct IP addresses from the address tablewhen setting up control policies.How to use Address TableWith easily recognized names of IP addresses and names of address groups shown in theaddress table, the Administrator can use these names as the source address or destinationaddress of control policies. The address table should be built before creating control policies,so that the Administrator can pick the names of correct IP addresses from the address tablewhen setting up control policies.54