RS-1000 Manual - kamery airlive airlivecam

For PPTP (European User Only): This option is for PPTP users who are required to enter ausername and password in order to connect, especially for European Users.Current Status: Displays the current line status of the PPTP connection.IP Address: Displays the IP Address of the PPTP connectionUsername: Enter the PPTP username provided by the ISP.Password: Enter the PPTP password provided by the ISP.Local IP: Select To obtain an IP address automatically or Use the following IP address.MAC Address: This is the MAC Address of the Bandwidth Manager.Hostname: This will be the name assign to the Bandwidth Manager. Please enter thehostname here. If not required by your ISP, you do not have to enter a hostname.Domain Name: This will be the domain name assign to the Bandwidth Manager.IP Address: Enter the IP address assigned to you by your ISP. This will be the public IPaddress of the External (WAN) port of the Bandwidth Manager.Netmask: This will be the Netmask of the external (WAN) network. (i.e. 255.255.255.0)Default Gateway: This will be the Gateway IP address.PPTP Gateway: This will be the PPTP Server IP address.Connect ID: Enter the phone number that provided and asked by some ISP. (Optional)Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.(Upstream/Downstream can be up to 10Mbps)BEZEQ-ISRAEL: The selection especially for the user who wants to connect to Bezeq (theIsraeli phone company which doesn’t conform to the RFC protocol).Service-On-Demand:Auto Disconnect: The PPTP connection will automatically disconnect after a length of idletime (no activities). Enter in the amount of idle minutes before disconnection. Enter ‘0’ ifyou do not want the PPTP connection to disconnect at all.53