RS-1000 Manual - kamery airlive airlivecam

RS-1000 Manual - kamery airlive airlivecam RS-1000 Manual - kamery airlive airlivecam

airlivecam.eu
from airlivecam.eu More from this publisher
12.07.2015 Views

DHCP ClientsEntering the DHCP Clients windowStep 1. Click on Status in the menu bar, then click on DHCP Clients below it.Step 2. A window will appear displaying the table of DHCP clients that are connected tothe device. The table will list host computers on the LAN network that obtain itsIP address from the Bandwidth Manager’s DHCP server function.!!Figure14-4 DHCP ClientsIP Address: the IP address of the LAN host computerMAC Address: MAC address of the LAN host computerLeased Time: The Start and End time of the DHCP lease for the LAN host computer.177

Setup ExamplesExample 1: Allow the LAN network to be able to access the InternetExample 2: The LAN network can only access Yahoo.com websiteExample 3: Outside users can access the LAN FTP server through Virtual ServersExample 4: I Install a server inside the LAN network and have the Internet (WAN) usersaccess the server through IP MappingExample 5: Use QoS to setup LAN to WAN network to attain the maximumdownstream/upstream bandwidth. The setup orders should be QoS and then PolicyExample 1:Allow the LAN network to be able to access the InternetStep 1. Enter the Outgoing window under the Policy menu.Step 2. Click the New Entry button on the bottom of the screen.Step 3. In the Add New Policy window, enter each parameter, then click OK.Step 4 When the following screen appears, the setup is completed.178

Setup ExamplesExample 1: Allow the LAN network to be able to access the InternetExample 2: The LAN network can only access Yahoo.com websiteExample 3: Outside users can access the LAN FTP server through Virtual ServersExample 4: I Install a server inside the LAN network and have the Internet (WAN) usersaccess the server through IP MappingExample 5: Use QoS to setup LAN to WAN network to attain the maximumdownstream/upstream bandwidth. The setup orders should be QoS and then PolicyExample 1:Allow the LAN network to be able to access the InternetStep 1. Enter the Outgoing window under the Policy menu.Step 2. Click the New Entry button on the bottom of the screen.Step 3. In the Add New Policy window, enter each parameter, then click OK.Step 4 When the following screen appears, the setup is completed.178

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!