RS-1000 Manual - kamery airlive airlivecam

Setting the Virtual Server’s servicesStep 1. For the Virtual Server which has already been set up with an IP address, click theNew Service button in the table.Step 2. In the Virtual Server Configurations window:" Server Virtual IP: displays the WAN IP address assigned to the Virtual Server" External Service Port: select the port number that the virtual server will use.Changing the Service will change the port number to match the service." Service: select the service from the pull down list that will be provided by theVirtual Server." Internal Server IP:The internal server IP address mapped by the virtualserver. Four computer IP addresses can be set at most, and the load can bemaintained in a balance.Step 3. Enter the IP address of the LAN network server(s), to which the virtual server willbe mapped. Up to four IP addresses can be assigned at most.Step 4. Click OK to save the settings of the Virtual Server.Note: The services in the drop-down list are all defined in the Pre-defined and Customsection of the Service menu.!!Figure9-9 Add New Virtual Server130