About Omneon MediaGrid - Harmonic Inc

To rack mount an Omneon MediaGrid:
System Installation with ContentServer 1000 and 2000 Series
1. Unpack the Omneon MediaGrid storage system components. Start at the bottom of the rack with a
ContentServer if this is the first device you are mounting.
2. Unpack the rack mount kit, which includes assorted mounting hardware, rear and side mounting
brackets. For each device, always follow the instructions in the mounting kit and use the
screws that are included with the mounting hardware.
3. Measure the depth of the cabinet from the front rail to the rear rail to determine the total length
required to mount each of the devices. The length of each device can be extended using various
combinations (and mounting positions) of the supplied brackets.
4. Select the set of rear brackets that best suits the depth of your cabinet (either normal depths or
shallow/extended depths).
Figure 24. Rear Brackets for 1RU Rack Mount Kit
5. Using the supplied mounting hardware, attach the selected set of rear brackets to the cabinet’s rear
rails.
6. Locate the screws included in the rack mounting kit for the side brackets. Attach both side brackets to
the device, such that the final length allows the tabs in the side rails to insert precisely in the rear
bracket slots. Use Figure 25 for reference.
Omneon, Now Part of Harmonic 63