29.11.2012 Views

About Omneon MediaGrid - Harmonic Inc

About Omneon MediaGrid - Harmonic Inc

About Omneon MediaGrid - Harmonic Inc

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

System Installation with ContentServer 3000 Series<br />

IMPORTANT: If you are supplying your own network switches, make sure to use only <strong>MediaGrid</strong>-qualified<br />

switches in your <strong>MediaGrid</strong> system. To find out if a switch is <strong>MediaGrid</strong>-qualified, contact your <strong>Harmonic</strong><br />

representative.<br />

Connecting with 1 GbE Network Switches<br />

This section provides instructions for connecting the ContentServer 3000 with 1 GbE network<br />

switches. Figure 9 shows the connections.<br />

10-GbE SFP+ SFP+ Ports Ports 10-GbE SFP+ Ports<br />

1 GbE Module A 1 GbE Module B<br />

Figure 9. ContentServer 3000 and 1 GbE Network Switch Connections<br />

To connect the ContentServer to a network switch:<br />

FAULT<br />

REMOVE<br />

POWER<br />

Controller A<br />

1. Starting with the left-hand controller, connect a red CAT-6 Ethernet cable to NIC 0. Connect the<br />

other end of the cable to port 1 on the first 1 GbE switch module. This will serve as the BMC<br />

connection.<br />

2. Using white CAT-6 Ethernet cables, connect two of the open NICs on the left-hand controller to<br />

open ports on the first 1 GbE switch module.<br />

<strong>Omneon</strong>, Now Part of <strong>Harmonic</strong> 31<br />

FAULT<br />

REMOVE<br />

POWER<br />

Controller B

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!