About Omneon MediaGrid - Harmonic Inc

System Installation with ContentServer 3000 Series
3. Locate the screws included in the rack mount kit for the side brackets. Using a Phillips screwdriver,
attach both side brackets to the switch. Use Figure 7 for reference.
Figure 7. Network Switch Bracket and Rail Assembly
4. With the side brackets attached to the switch, attach the side brackets to the cabinet’s rear rails.
5. Repeat the previous steps to install the remaining network switches.
Refer to the network switch product manuals provided with the Omneon MediaGrid system for more
information about rack mounting the switches.
Installing the Bezel
The bezel ships separately from the ContentServer 3000 and ContentStore 3160. Follow these steps to
install the bezel on these units. You should mount the ContentServer or ContentStore on the rack
prior to installing the bezel, and disk drives should already be inserted.
To install the bezel:
1. Fit the two posts on the left side of the bezel into the holes in the rack ear on the left side of chassis.
2. Press in the release button on the right side of the bezel while pushing the right side of the bezel
straight onto the chassis, and then release the button. The posts on the right side of the bezel will fit
into the holes in the right-hand rack ear and secure the bezel on the chassis. See Figure 8.
Omneon, Now Part of Harmonic 29