About Omneon MediaGrid - Harmonic Inc

Hardware Reference
Table 41. ContentServer 2124 Rear Panel Components (Continued)
# Component Description
7 Serial connector Use to connect a serial device to the system.
8 Video connector Use to connect a monitor to the system.
9 NIC 0 Ethernet port Use the two GbE ports for system communication and
10 NIC 1 Ethernet port
interfacing with selected applications.
The link/activity LED on the right of the connector
indicates network connection when on and
transmit/receive activity when blinking. The LED on the
left of the connector indicates speed.
Refer to Table 42 for a description of each LED state.
11 USB ports Use to connect USB devices to the system.
12 PCI slots These slots are unused.
13 NIC 2 Ethernet port Use the two GbE ports for system communication and
14 NIC 3 Ethernet port
interfacing with selected applications.
The link/activity LED on the right of the connector
indicates network connection when on and
transmit/receive activity when blinking. The LED on the
left of the connector indicates speed.
Refer to Table 42 for a description of each LED state.
Gigabit Ethernet Port LEDs
Figure 110 and Table 42 provide descriptions of the Gigabit Ethernet Port Status LEDs.
Link Activity
Figure 110. Gigabit Ethernet Status LEDs
Table 42. ContentServer 2124 Gigabit Ethernet Port Status LEDs
LED LED State NIC State
Link (left) Off Inactive
Green NIC connected at 100 Mbps
Amber NIC connected at 1000 Mbps
Activity (right) Green (solid) Active connection
Green (blinking) Transmit/receive activity
236 Installation and Configuration Guide