About Omneon MediaGrid - Harmonic Inc

2
1
2
1
3
ID
Figure 104. ContentServer 2122 Rear Panel
4
5
S tatus
NIC 0 NIC 1
Table 36. ContentServer 2122 Rear Panel Components
# Component Description
6
7
8 9 11 10
Hardware Reference
1 Power supplies Dual, redundant power supplies provide power to the
system.
2 Power supply status LED Lights to indicate status of the power supply, as follows:
• No Color—indicates no AC power to power supply
unit.
• Green (blinking)—indicates that power supplied to the
unit and standby voltages are available.
• Green (solid on)—indicates that all power outputs
available.
• Amber (solid on)—indicates that the power supply has
failed; shutdown due to over current; shutdown due to
over temperature; indicating a predictive failure.
3 ID LED Blinks on when the unit has been “winked” from the
SystemManager application.
4 PS/2 mouse connector Use to connect a mouse to the system.
5 PS/2 keyboard connector Use to connect a keyboard to the system.
6 System status LED Lights to indicate status of the system, as follows:
• No Color—indicates that the system not ready; the AC
power is off.
• Green/Amber (alternate blinking)—indicates the system
is not ready; pre-power is on.
• Green (solid on)—indicates the system booted and is
ready.
• Green (blink)—indicates the system degraded.
• Amber (blink)—indicates a on-critical or non-fatal
alarm.
• Amber (solid on)—indicates a critical, non-recoverable
error. The system has failed or shut down.
Omneon, Now Part of Harmonic 229
12