About Omneon MediaGrid - Harmonic Inc

Power and
fault LEDs
Figure 75. Rear View of 5406 Network Switch
For more information about the switches, including LED and port descriptions, refer to the
documentation that ships with the product.
Hardware Reference
IMPORTANT: Hot swapping of the cl modules is not supported on the 1010 switches. A switch reset occurs if
you install or remove modules after the switch has been powered on. Only install or remove modules during
scheduled downtime.
IMPORTANT: The ContentServer 3000 and ContentStore 3160 cannot be connected directly to CX4 ports.
ContentDirectors 1000C/1000D and High Performance
ContentDirector 2000
ContentDirectors manage and direct the overall operation of Omneon MediaGrid. They enable clients
to interact with the system by creating and presenting a single virtual file system constructed from
Omneon MediaGrid’s many individual ContentServer storage devices.
The ContentDirectors 1000C/1000D and the High Performance ContentDirector 2000 have the
same front and rear panel components and same functionality. However, the High Performance
ContentDirector 2000 includes additional memory and a solid state drive to increase performance.
Front Panel Components
AC power
connector
Figure 76 and Table 7 detail the front panel of the ContentDirector 1000C/1000D and High
Performance ContentDirector 2000.
Omneon, Now Part of Harmonic 201