About Omneon MediaGrid - Harmonic Inc
About Omneon MediaGrid - Harmonic Inc About Omneon MediaGrid - Harmonic Inc
Accessing the Omneon MediaGrid Figure 47. Avid Share Control Parameters Once the Avid Share Control section of the Win FSD Parameters is enabled, you can configure it as follows: • In the Avid Station field, enter the folder name for your Avid station if applicable. • Select Enable Avid share support to enable Avid sharing if applicable. Selecting a Default Log In Credential With version 3.1.1 of the Windows FSD, you can select whether you would like the Windows domain credential or your saved credential to be your first choice for connecting to MediaGrid from the Windows FSD. To use this feature, you must edit the SavedCredential registry key in the Windows registry. To modify the SavedCredential value: 1. Start the regedit.exe program. (If the computer does not fully boot, boot in safe mode first). 2. Navigate to the following registry location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OmRdr\Parameters 3. Create a DWORD value in the above registry key with the name SavedCredential. 4. Set the value of the new DWORD to a non-zero value if you wish to use the saved credential as your first choice. Set it to zero if you wish to use the Windows domain credential as your first choice. Managing Access to an Omneon MediaGrid File System To manage access to an Omneon MediaGrid file system: 1. Do one of the following: • Selecting Remember Password for this Computer stores the password for future use and allows access to the file system to any user of the computer. Future attempts to access the Omneon MediaGrid do not require entry of a password. • Selecting Remember Password for this User stores the password for future use, but allows access to the file system to the current user only. Future attempts by the current user to access the Omneon MediaGrid do not require entry of a password. 152 Installation and Configuration Guide
Automatically Mounting a File System Accessing the Omneon MediaGrid If you are running an application as a Windows Service, it may be desirable to mount the Omneon MediaGrid file system without being prompted to enter a user name and password. If Windows is set up to reconnect a share after reboot, the user name and password prompt always displays. Follow these steps to create a startup file that prevents the user name and password prompt from displaying. Complete this procedure before logging on to the Omneon MediaGrid file system. To automatically mount a file system: 1. Click the Start button on the Windows taskbar and then click Run. 2. Start the Group Policy management console by typing the following: gpedit.msc The following window opens. Figure 48. Group Policy 3. In the left pane, navigate to Computer Configuration > Windows Settings > Scripts (Startup/Shutdown). 4. Double-click the Startup script in the right pane. The Startup Properties dialog box displays. Omneon, Now Part of Harmonic 153
- Page 125 and 126: System Configuration 1. After confi
- Page 127 and 128: 4. Type the following commands to r
- Page 129 and 130: The expected result is: Domain=[SNV
- Page 131 and 132: System Configuration This mount poi
- Page 133 and 134: System Configuration c. Replace wi
- Page 135 and 136: Modify the file as follows: System
- Page 137 and 138: Omneon MediaGrid name ContentDirect
- Page 139 and 140: Editing the LDAP Configuration File
- Page 141 and 142: System Configuration 4. Create a Sa
- Page 143 and 144: Modify the file as follows: System
- Page 145 and 146: Figure 43. Server Admin Open Direct
- Page 147 and 148: The following is a sample output fr
- Page 149 and 150: System Configuration a. Replace dom
- Page 151 and 152: System Configuration NOTE: Upon joi
- Page 153 and 154: To verify the service: 1. Type the
- Page 155 and 156: System Configuration configurations
- Page 157 and 158: To configure the amount of memory u
- Page 159 and 160: System Configuration 4. Set the val
- Page 161 and 162: System Configuration 9. As the tran
- Page 163 and 164: The acceptable options are “YES
- Page 165 and 166: CHAPTER 4 Installing the File Syste
- Page 167 and 168: Installing the File System Driver s
- Page 169 and 170: Installing the File System Driver 3
- Page 171 and 172: CHAPTER 5 Accessing the Omneon Medi
- Page 173 and 174: Figure 45. Omneon MediaGrid Login A
- Page 175: Accessing the Omneon MediaGrid •
- Page 179 and 180: 11. Click the Browse button and the
- Page 181 and 182: Figure 53. Connect to Omneon MediaG
- Page 183 and 184: Figure 54. Automatic MediaGrid Conn
- Page 185 and 186: Accessing the Omneon MediaGrid Moun
- Page 187 and 188: Table 4. Mount Options (Continued)
- Page 189 and 190: Table 5. Mount Options (Continued)
- Page 191 and 192: Accessing the Omneon MediaGrid To u
- Page 193 and 194: Figure 58. MyDir Properties Accessi
- Page 195 and 196: Accessing the Omneon MediaGrid •
- Page 197 and 198: Using AFP on a Macintosh Client Fol
- Page 199 and 200: Accessing the Omneon MediaGrid For
- Page 201 and 202: CHAPTER 6 Administrative Procedures
- Page 203 and 204: Table 6. mgcopy Values Values Descr
- Page 205 and 206: Figure 60. Firmware Version Selecti
- Page 207 and 208: Administrative Procedures Use the f
- Page 209 and 210: Administrative Procedures 1. From t
- Page 211 and 212: To log on to a ContentDirector: 1.
- Page 213 and 214: 3. Type the following two lines at
- Page 215 and 216: Administrative Procedures 1. Attach
- Page 217 and 218: 4. Change directory to /mnt, as sho
- Page 219 and 220: CHAPTER 7 Hardware Reference This c
- Page 221 and 222: Figure 67. Rear View of 1010 Networ
- Page 223 and 224: Power, fault and locator LEDs Conso
- Page 225 and 226: Power and fault LEDs Figure 75. Rea
Accessing the <strong>Omneon</strong> <strong>MediaGrid</strong><br />
Figure 47. Avid Share Control Parameters<br />
Once the Avid Share Control section of the Win FSD Parameters is enabled, you can configure it as<br />
follows:<br />
• In the Avid Station field, enter the folder name for your Avid station if applicable.<br />
• Select Enable Avid share support to enable Avid sharing if applicable.<br />
Selecting a Default Log In Credential<br />
With version 3.1.1 of the Windows FSD, you can select whether you would like the Windows domain<br />
credential or your saved credential to be your first choice for connecting to <strong>MediaGrid</strong> from the<br />
Windows FSD. To use this feature, you must edit the SavedCredential registry key in the Windows<br />
registry.<br />
To modify the SavedCredential value:<br />
1. Start the regedit.exe program. (If the computer does not fully boot, boot in safe mode first).<br />
2. Navigate to the following registry location:<br />
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OmRdr\Parameters<br />
3. Create a DWORD value in the above registry key with the name SavedCredential.<br />
4. Set the value of the new DWORD to a non-zero value if you wish to use the saved credential as your<br />
first choice. Set it to zero if you wish to use the Windows domain credential as your first choice.<br />
Managing Access to an <strong>Omneon</strong> <strong>MediaGrid</strong> File System<br />
To manage access to an <strong>Omneon</strong> <strong>MediaGrid</strong> file system:<br />
1. Do one of the following:<br />
• Selecting Remember Password for this Computer stores the password for future use and<br />
allows access to the file system to any user of the computer. Future attempts to access the<br />
<strong>Omneon</strong> <strong>MediaGrid</strong> do not require entry of a password.<br />
• Selecting Remember Password for this User stores the password for future use, but allows<br />
access to the file system to the current user only. Future attempts by the current user to access the<br />
<strong>Omneon</strong> <strong>MediaGrid</strong> do not require entry of a password.<br />
152 Installation and Configuration Guide