About Omneon MediaGrid - Harmonic Inc
About Omneon MediaGrid - Harmonic Inc About Omneon MediaGrid - Harmonic Inc
Accessing the Omneon MediaGrid 4. Omneon MediaGrid File System Driver Parameters 5. Complete the settings as follows: • In the Application Performance section: • Set the appropriate ReadAhead values. See the latest Omneon MediaGrid Release Notes for Windows FSD for the currently supported range of readahead values. It is recommended that you map the Omneon MediaGrid file system drive once again to ensure the changes take effect. • For the MaxConnection field, Omneon recommends that you leave the default value of 8 unless you plan on using an application such as MXFServer. In this case, refer to the Omneon MediaGrid Release Notes for Windows FSD for recommended settings. • Select Disable CRC check on read if you wish to disable the CRC check to reduce CPU usage. • In the Application Feature section: • Select Disable case insensitivity if you would like to set the file system to be case sensitive. By default, the Windows file system is case insensitive (for example, File 1 and file 1 can be used). Checking this box is useful when the Omneon MediaGrid system has a large number of files. • Select Enable multiple NIC support to utilize computers with multiple 1 gigabit Ethernet ports, enabling all ports to access data on Omneon MediaGrid. By default, Multi-NIC support is disabled in the Windows FSD. IMPORTANT: If you modify the setting for Enable multiple NIC support, you must click Apply and then restart your computer in order for the changes to take effect. • Click Deny file deletion if used by other to prevent any user from deleting a file that is in use by another user. • The Application Profile section provides control over the priority of access requests issued to Omneon MediaGrid. Access requests can be set to normal or nonlinear (high priority). 150 Installation and Configuration Guide
Accessing the Omneon MediaGrid • Select the Nonlinear setting for those applications sensitive to millisecond level delays, such as video editors. • Select the Normal setting for all other applications (for example archive or office applications). No client receives preferred access when all clients are set to use Nonlinear. • Click Add User Credential to log in to the FSD from the resulting dialog box. See Figure 46 for an example. Figure 46. User Credential From the User Credential dialog box, enter a Username, Domain (optional) and Password, confirm the password, and then click Add User Credential to save the credential. A total of five credentials may be saved. A newly entered credential replaces the oldest entry if five are stored. NOTE: Make sure to enter the correct user credential information, including a valid domain, because this utility is unable to confirm your credential. • Select Remove All Saved Credentials to remove the entire list of saved credentials. 6. Click Apply to save your changes. Enabling and Editing Avid Share Control By default, the Avid Share Control feature will be hidden from the Win FSD Parameters dialog box. To enable this feature you must edit the Windows registry. To enable Avid Share Control: 1. Start the regedit program, and navigate to the following registry location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OmRdr\Parameters 2. Create a DWORD value named “AvidSupport” with a value of 1. The Avid Share Control parameters will be enabled. Omneon, Now Part of Harmonic 151
- Page 123 and 124: A list of users in the domain displ
- Page 125 and 126: System Configuration 1. After confi
- Page 127 and 128: 4. Type the following commands to r
- Page 129 and 130: The expected result is: Domain=[SNV
- Page 131 and 132: System Configuration This mount poi
- Page 133 and 134: System Configuration c. Replace wi
- Page 135 and 136: Modify the file as follows: System
- Page 137 and 138: Omneon MediaGrid name ContentDirect
- Page 139 and 140: Editing the LDAP Configuration File
- Page 141 and 142: System Configuration 4. Create a Sa
- Page 143 and 144: Modify the file as follows: System
- Page 145 and 146: Figure 43. Server Admin Open Direct
- Page 147 and 148: The following is a sample output fr
- Page 149 and 150: System Configuration a. Replace dom
- Page 151 and 152: System Configuration NOTE: Upon joi
- Page 153 and 154: To verify the service: 1. Type the
- Page 155 and 156: System Configuration configurations
- Page 157 and 158: To configure the amount of memory u
- Page 159 and 160: System Configuration 4. Set the val
- Page 161 and 162: System Configuration 9. As the tran
- Page 163 and 164: The acceptable options are “YES
- Page 165 and 166: CHAPTER 4 Installing the File Syste
- Page 167 and 168: Installing the File System Driver s
- Page 169 and 170: Installing the File System Driver 3
- Page 171 and 172: CHAPTER 5 Accessing the Omneon Medi
- Page 173: Figure 45. Omneon MediaGrid Login A
- Page 177 and 178: Automatically Mounting a File Syste
- Page 179 and 180: 11. Click the Browse button and the
- Page 181 and 182: Figure 53. Connect to Omneon MediaG
- Page 183 and 184: Figure 54. Automatic MediaGrid Conn
- Page 185 and 186: Accessing the Omneon MediaGrid Moun
- Page 187 and 188: Table 4. Mount Options (Continued)
- Page 189 and 190: Table 5. Mount Options (Continued)
- Page 191 and 192: Accessing the Omneon MediaGrid To u
- Page 193 and 194: Figure 58. MyDir Properties Accessi
- Page 195 and 196: Accessing the Omneon MediaGrid •
- Page 197 and 198: Using AFP on a Macintosh Client Fol
- Page 199 and 200: Accessing the Omneon MediaGrid For
- Page 201 and 202: CHAPTER 6 Administrative Procedures
- Page 203 and 204: Table 6. mgcopy Values Values Descr
- Page 205 and 206: Figure 60. Firmware Version Selecti
- Page 207 and 208: Administrative Procedures Use the f
- Page 209 and 210: Administrative Procedures 1. From t
- Page 211 and 212: To log on to a ContentDirector: 1.
- Page 213 and 214: 3. Type the following two lines at
- Page 215 and 216: Administrative Procedures 1. Attach
- Page 217 and 218: 4. Change directory to /mnt, as sho
- Page 219 and 220: CHAPTER 7 Hardware Reference This c
- Page 221 and 222: Figure 67. Rear View of 1010 Networ
- Page 223 and 224: Power, fault and locator LEDs Conso
Accessing the <strong>Omneon</strong> <strong>MediaGrid</strong><br />
4. <strong>Omneon</strong> <strong>MediaGrid</strong> File System Driver Parameters<br />
5. Complete the settings as follows:<br />
• In the Application Performance section:<br />
• Set the appropriate ReadAhead values. See the latest <strong>Omneon</strong> <strong>MediaGrid</strong> Release Notes for<br />
Windows FSD for the currently supported range of readahead values. It is recommended that<br />
you map the <strong>Omneon</strong> <strong>MediaGrid</strong> file system drive once again to ensure the changes take<br />
effect.<br />
• For the MaxConnection field, <strong>Omneon</strong> recommends that you leave the default value of 8<br />
unless you plan on using an application such as MXFServer. In this case, refer to the <strong>Omneon</strong><br />
<strong>MediaGrid</strong> Release Notes for Windows FSD for recommended settings.<br />
• Select Disable CRC check on read if you wish to disable the CRC check to reduce CPU<br />
usage.<br />
• In the Application Feature section:<br />
• Select Disable case insensitivity if you would like to set the file system to be case sensitive.<br />
By default, the Windows file system is case insensitive (for example, File 1 and file 1 can be<br />
used). Checking this box is useful when the <strong>Omneon</strong> <strong>MediaGrid</strong> system has a large number<br />
of files.<br />
• Select Enable multiple NIC support to utilize computers with multiple 1 gigabit Ethernet<br />
ports, enabling all ports to access data on <strong>Omneon</strong> <strong>MediaGrid</strong>. By default, Multi-NIC<br />
support is disabled in the Windows FSD.<br />
IMPORTANT: If you modify the setting for Enable multiple NIC support, you must click Apply and then<br />
restart your computer in order for the changes to take effect.<br />
• Click Deny file deletion if used by other to prevent any user from deleting a file that is in<br />
use by another user.<br />
• The Application Profile section provides control over the priority of access requests issued to<br />
<strong>Omneon</strong> <strong>MediaGrid</strong>. Access requests can be set to normal or nonlinear (high priority).<br />
150 Installation and Configuration Guide
Change language