About Omneon MediaGrid - Harmonic Inc
About Omneon MediaGrid - Harmonic Inc About Omneon MediaGrid - Harmonic Inc
System Configuration Configure Samba Settings for the ContentBridge To configure Samba settings: 1. Log on to the first ContentDirector in your system using the following user name and password: User name: ovnuser Password: OVN@SvCaUsa 2. Remove samba private files stored on the ContentDirector with the following command: sudo rm -f /tftpboot/config/gateway/secrets/* 3. Generate the file, /tftpboot/config/gateway/smb.conf, as shown in Figure 41. Modify the settings as follows: security = DOMAIN workgroup = password server = add user script = /opt/omutils/bin/omadduser %u a. Replace domain_name with the OpenDirectory domain using the distinguished name of the search base in Open Directory server configuration, which is the name that uniquely identifies an entry in the directory. b. Replace opendir_FQDN with the Fully Qualified Domain Name of the Apple Open Directory server. 4. Repeat steps 1-3 for all remaining ContentDirectors in the MediaGrid cluster. Join the ContentBridge to the Apple Open Directory Domain To join the ContentBridge to the Apple Open Directory domain: 1. Log on to the ContentBridge using the following user name and password: User name: root Password: omneon 2. Stop smb service service smb stop 3. Remove samba private files on the ContentBridge: rm -f /var/lib/samba/private/* 4. Copy Samba configuration file from the ContentDirector generated in step 3 in subsection above. You may be required to enter “sudo” when copying files over. Copy /tftpboot/config/gateway/smb.conf from the ContentDirector to /etc/samba/smb.conf on the ContentBridge. 5. Run the following command: net rpc join -U% -S 126 Installation and Configuration Guide
System Configuration NOTE: Upon joining the OpenDirectory domain, the Samba server creates a local temporary database on the ContentBridge at: /var/lib/samba/private/secrets.tdb. 6. Remove any “CB” entries that provide access to individual users from the/etc/password file locally on the ContentBridge and file under /tftpboot/config/gateway on all ContentDirectors. Open /etc/password and delete entries for the same individual users (the entries do not contain “CB” in this file). NOTE: In order to access the MediaGrid, the individual users must be added to the Active Directory domain. 7. Add the following line to the ContentBridge configuration file. This can be done via SystemManager or by editing /tftpboot/config/gateway/ manually on ALL ContentDirectors. NATIVE Replace with the hostname of the ContentBridge. 8. Restart the gateway service: service gateway restart 9. Repeat steps 1-8 for all remaining ContentBridges in the MediaGrid cluster. Verify Communication with the Domain Controller Follow the steps described in Verifying Communication with the Domain Controller. NOTE: Make sure the MediaGrid cluster is also configured with Apple Open Directory. NOTE: In order to access the MediaGrid, the individual users must be added to the Apple Open Directory domain. Verifying ContentServer and ContentDirector Services Perform the following procedures to verify that the relevant services are running on the ContentServers and ContentDirectors. Verifying DHCP Settings Follow these procedures to verify the DHCP settings on both the Primary and Secondary ContentDirectors. To verify DHCP settings: 1. Type the following at the command prompt: sudo /sbin/chkconfig --list dhcpd You will see output similar to the following if DHCP is configured to be on: dhcpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off You will see output similar to the following if DHCP is configured to be off: dhcpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off Omneon, Now Part of Harmonic 127
- Page 99 and 100: System Installation with ContentSer
- Page 101 and 102: System Installation with ContentSer
- Page 103 and 104: 2. Continue connecting any remainin
- Page 105 and 106: System Installation with ContentSer
- Page 107 and 108: CHAPTER 3 System Configuration This
- Page 109 and 110: Password: OVN@SvCaUsa 3. Enter the
- Page 111 and 112: System Configuration 4. If you are
- Page 113 and 114: 6. Apply power to the ContentServer
- Page 115 and 116: Notes on Active Directory Configura
- Page 117 and 118: Follow the prompts to initialize th
- Page 119 and 120: Joining an Omneon MediaGrid Cluster
- Page 121 and 122: 1. From your SSH terminal, edit /et
- Page 123 and 124: A list of users in the domain displ
- Page 125 and 126: System Configuration 1. After confi
- Page 127 and 128: 4. Type the following commands to r
- Page 129 and 130: The expected result is: Domain=[SNV
- Page 131 and 132: System Configuration This mount poi
- Page 133 and 134: System Configuration c. Replace wi
- Page 135 and 136: Modify the file as follows: System
- Page 137 and 138: Omneon MediaGrid name ContentDirect
- Page 139 and 140: Editing the LDAP Configuration File
- Page 141 and 142: System Configuration 4. Create a Sa
- Page 143 and 144: Modify the file as follows: System
- Page 145 and 146: Figure 43. Server Admin Open Direct
- Page 147 and 148: The following is a sample output fr
- Page 149: System Configuration a. Replace dom
- Page 153 and 154: To verify the service: 1. Type the
- Page 155 and 156: System Configuration configurations
- Page 157 and 158: To configure the amount of memory u
- Page 159 and 160: System Configuration 4. Set the val
- Page 161 and 162: System Configuration 9. As the tran
- Page 163 and 164: The acceptable options are “YES
- Page 165 and 166: CHAPTER 4 Installing the File Syste
- Page 167 and 168: Installing the File System Driver s
- Page 169 and 170: Installing the File System Driver 3
- Page 171 and 172: CHAPTER 5 Accessing the Omneon Medi
- Page 173 and 174: Figure 45. Omneon MediaGrid Login A
- Page 175 and 176: Accessing the Omneon MediaGrid •
- Page 177 and 178: Automatically Mounting a File Syste
- Page 179 and 180: 11. Click the Browse button and the
- Page 181 and 182: Figure 53. Connect to Omneon MediaG
- Page 183 and 184: Figure 54. Automatic MediaGrid Conn
- Page 185 and 186: Accessing the Omneon MediaGrid Moun
- Page 187 and 188: Table 4. Mount Options (Continued)
- Page 189 and 190: Table 5. Mount Options (Continued)
- Page 191 and 192: Accessing the Omneon MediaGrid To u
- Page 193 and 194: Figure 58. MyDir Properties Accessi
- Page 195 and 196: Accessing the Omneon MediaGrid •
- Page 197 and 198: Using AFP on a Macintosh Client Fol
- Page 199 and 200: Accessing the Omneon MediaGrid For
System Configuration<br />
Configure Samba Settings for the ContentBridge<br />
To configure Samba settings:<br />
1. Log on to the first ContentDirector in your system using the following user name and password:<br />
User name: ovnuser<br />
Password: OVN@SvCaUsa<br />
2. Remove samba private files stored on the ContentDirector with the following command:<br />
sudo rm -f /tftpboot/config/gateway/secrets/*<br />
3. Generate the file, /tftpboot/config/gateway/smb.conf, as shown in Figure 41.<br />
Modify the settings as follows:<br />
security = DOMAIN<br />
workgroup = <br />
password server = <br />
add user script = /opt/omutils/bin/omadduser %u<br />
a. Replace domain_name with the OpenDirectory domain using the distinguished name of the<br />
search base in Open Directory server configuration, which is the name that uniquely identifies an<br />
entry in the directory.<br />
b. Replace opendir_FQDN with the Fully Qualified Domain Name of the Apple Open Directory<br />
server.<br />
4. Repeat steps 1-3 for all remaining ContentDirectors in the <strong>MediaGrid</strong> cluster.<br />
Join the ContentBridge to the Apple Open Directory Domain<br />
To join the ContentBridge to the Apple Open Directory domain:<br />
1. Log on to the ContentBridge using the following user name and password:<br />
User name: root<br />
Password: omneon<br />
2. Stop smb service<br />
service smb stop<br />
3. Remove samba private files on the ContentBridge:<br />
rm -f /var/lib/samba/private/*<br />
4. Copy Samba configuration file from the ContentDirector generated in step 3 in subsection above. You<br />
may be required to enter “sudo” when copying files over.<br />
Copy /tftpboot/config/gateway/smb.conf from the ContentDirector to /etc/samba/smb.conf<br />
on the ContentBridge.<br />
5. Run the following command:<br />
net rpc join -U% -S <br />
126 Installation and Configuration Guide