About Omneon MediaGrid - Harmonic Inc

System Configuration
7. Add the following line to the ContentBridge configuration file. This can be done via SystemManager
or by editing /tftpboot/config/gateway/ manually on ALL ContentDirectors.
NATIVE
Replace with the hostname of the ContentBridge.
8. Restart the gateway service:
service gateway restart
9. Repeat steps 1-8 for all remaining ContentBridges in the MediaGrid cluster.
Verify Communication with the Domain Controller
Follow the steps described in Verifying Communication with the Domain Controller.
NOTE: Make sure the MediaGrid cluster is also configured with LDAP.
NOTE: In order to access the MediaGrid, the individual users must be added to the LDAP domain.
Joining an Omneon MediaGrid Cluster to an Apple Open
Directory Domain
Omneon MediaGrid supports Apple Open Directory for authentication and directory services. If you
have enabled LDAP Bind Authentication on your Mac OS X server, you can join the Omneon
MediaGrid to Apple Open Directory.
For information on joining a ContentBridge to an Apple Open Directory domain, refer to one of the
following:
• Joining a ContentBridge 2010B/2010C to Apple Open Directory
• Joining a ContentBridge 1000B to Apple Open Directory
For general information on Apple Open Directory, refer to the Apple website:
http://images.apple.com/server/macosx/docs/Open_Directory_Admin_v10.5.pdf.
IMPORTANT: You must be familiar with setting up LDAP clients to complete these steps.
To join the Omneon MediaGrid to Apple Open Directory:
1. On the Apple Macintosh computer, launch Server Admin.
2. Connect to the Apple Macintosh server. From the left-hand column, select Open Directory, and then
click the Overview tab at the top of the dialog box.
3. Ensure that this dialog box indicates Open Directory is: Open Directory Master, and verify that the
LDAP Search Base settings are correct. Refer to Figure 43 for an example.
120 Installation and Configuration Guide