About Omneon MediaGrid - Harmonic Inc

Modify the file as follows:
System Configuration
security = DOMAIN
workgroup =
password server =
add user script = /opt/omutils/bin/omadduser %u
a. Replace domain_name with the LDAP domain using the distinguished name of the search base in
the LDAP server configuration, which is the name that uniquely identifies an entry in the
directory.
b. Replace ldap_FQDN with the Fully Qualified Domain Name of the LDAP server.
4. Repeat steps 1-3 for all remaining ContentDirectors in the MediaGrid cluster.
Join the ContentBridge to the LDAP Domain
To join the ContentBridge to the LDAP domain:
1. Log on to the ContentBridge using the following user name and password:
User name: root
Password: omneon
2. Stop smb service
service smb stop
3. Remove samba private files on the ContentBridge:
rm -f /var/lib/samba/private/*
4. Copy Samba configuration file from the ContentDirector generated in step 3 in subsection above. You
may be required to enter “sudo” when copying files over.
Copy /tftpboot/config/gateway/smb.conf from the ContentDirector to /etc/samba/smb.conf
on the ContentBridge.
5. Run the following command:
net rpc join -U% -S
NOTE: Upon joining the LDAP domain, the Samba server creates a local temporary database on the
ContentBridge at: /var/lib/samba/private/secrets.tdb.
6. Remove any “CB” entries that provide access to individual users from the/etc/password file locally on
the ContentBridge and file under /tftpboot/config/gateway on all
ContentDirectors.
Open /etc/password and delete entries for the same individual users (the entries do not contain
“CB” in this file).
NOTE: In order to access the MediaGrid, the individual users must be added to the LDAP domain.
Omneon, Now Part of Harmonic 119